Functional properties of acetylated glutenin and gliadin at varying pH values

Rapid Gluten Allergen Detection Using an Integrated Photoimaging Assay and Ionic Liquid Extraction Sensor

In recent years, food allergies and food sensitivities have remained critical public health problems that affect approximately 15% of the global population. Wheat is a major food source worldwide, but it is also a common food allergen. Celiac disease is chronic immune-mediated enteropathy triggered by exposure to dietary gluten in genetically predisposed individuals; it can be treated only through strict gluten avoidance. Therefore, rapid gluten detection is crucial for protecting the health of patients. Gluten contains two primary water-insoluble proteins: gliadin and glutenin. Gliadin is a key contributor to celiac disease and poses challenges for sample pretreatment owing to its insolubility, thereby reducing the accuracy and sensitivity of detection systems. Rapid sample processing is a critical problem in gliadin detection. In this report, we developed a gliadin sensor system called the integrated food allergy and microorganism sensor (iFAMs). The iFAMs comprises a gliadin lateral flow chip, a one-pot extraction solution, and an image assay app. The iFAMs enables gliadin extraction and detection in under 2 min with high sensitivity (0.04 mg/kg for gliadin, lower than the regulatory limit of 20 mg/kg). Users can easily measure gluten concentrations in samples and quantify gliadin levels using the smartphone-based image assay app. In samples collected from restaurants, the iFAMs successfully detected hidden gluten within "gluten-free" food items. The compact size and user-friendly design of the iFAMs render it suitable for not only consumers but also clinicians, food industries, and regulators to enhance food safety.

Protein digestibility and techno-functional performance of milk-alternative prototypes based on combinations of lentil and cereal protein

Lentil protein isolate was combined with proteins from oat, rice, brewer's spent grain (BSGP) and wheat to achieve plant-based milk alternatives (PBMA) with improved protein quality and functionality. Due to the complementary amino acid (AA) profile of pulse protein which is high in lysine, and cereal protein which is high in sulphur amino acids, their combination at an optimised ratio resulted in a protein blend with a significantly improved indispensable amino acid score (IAAS) compared to the single ingredients. All protein combinations with lentil except for wheat resulted in a full IAAS for adults. The in vitro protein digestibility was assessed using the static INFOGEST digestion model to calculate the proxy in vitro DIAAS (PIVDIAAS) of the emulsions. Techno-functional properties such as particle size, rheological behaviour and physical stability were investigated. The PIVDIAAS of the combined protein emulsions was found to be 0.72, 0.78, 0.83, 0.98 for lentil + wheat, lentil + oat, lentil + BSGP and lentil + rice emulsions, respectively, compared to 0.48, 0.25, 0.5, 0.67 and 0.81 determined for the emulsions based on lentil, wheat, oat, BSGP and rice alone, respectively. The emulsions based on the combination of lentil and cereal protein also showed improved physical stability regarding sedimentation and creaming, and a higher whiteness index of the emulsions. It could be shown that the combination of lentil and cereal protein is a promising strategy to achieve PBMAs with improved protein quality and techno-functionality.

Wheat gliadin hydrolysates based nano-micelles for hydrophobic naringin: Structure characterization, interaction, and in vivo digestion

In this study, enzymatic hydrolysis was used to fabricate wheat gliadin hydrolysates (WGHs) for the encapsulation and protection of naringin. The exposure of hydrophilic amino acids decreased the critical micelle concentration (from 0.53 ± 0.02 mg/mL to 0.35 ± 0.03 mg/mL) and improved solubility, which provided amphiphilic conditions for the delivery of naringin. The hydrolysates with a degree of hydrolysis (DH) of 9 % had the strongest binding affinity with naringin, and exhibited the smallest particle size (113.7 ± 1.1 nm) and the highest encapsulation rate (83.2 ± 1.3 %). The storage, heat and photochemical stability of naringin were improved via the encapsulation of micelles. Furthermore, the micelles made up of hydrolysates with a DH of 12 % significantly enhanced the bioavailability of naringin (from 19.4 ± 4.3 % to 46.8 ± 1.4 %). Our experiment provides theoretical support for the utilization of delivery systems based on water-insoluble proteins.

Gliadin and glutenin genomes and their effects on the technological aspect of wheat-based products

Wheat is the most important crops worldwide, providing about one-fifth of the daily protein and calories for human consumption. The quality of cereal-based products is principally governed by the genetic basis of gluten (glutenin and gliadin proteins), which exists in a wide range of variable alleles and is controlled by clusters of genes. There are certain limitations associated with gluten characteristics, which can be genetically manipulated. The present review aimed to investigate the correlation between the genetic characteristics of gluten protein components and wheat-based product's quality. According to various references, Glu-B1d (6 + 8), Glu-B1h (14 + 15) and Glu-B1b (7 + 8) are related to higher gluten strength and pasta quality, while, subunits Dx2 + Dy12 and Dx5 + Dy10, are usually present at the Glu-D1 locus in bread wheat, resulted in lower cooked firmness in pasta. Moreover, introducing Gli-D1/Glu-D3 and Glu-D1 loci into durum wheat genomes, causing to provide the maximum values of gluten index in pasta products. 1Dx5 + 1Dy10 alleles determine the level of increase in dough's consistency, elasticity, viscosity, and extensibility quality of baking and appropriate bread loaf volume, while 1Dx2 + 1Dy12 as the alleles associated with poor baking quality, being more suitable for soft wheat/pastry end uses. Bx7, Bx7OE, 1Bx17 + 1By18, 1Bx13 + 1By16, Bx7 + By9 and 1Bx7 + 1By8 at Glu-B1alleles and 1Ax2* found on Glu-A1, augmented dough strength and has positive effects on consistency, extensibility, viscosity, and elasticity of bread dough. Breeding programs by genome editing have made gluten a promoting component for improving cereal-based products.

Relevance of the air-water interfacial and foaming properties of (modified) wheat proteins for food systems

A shift from animal protein- to plant protein-based foods is crucial in transitioning toward a more sustainable global food system. Among food products typically stabilized by animal proteins, food foams represent a major category. Wheat proteins are ubiquitous and structurally diverse, which offers opportunities for exploiting them for food foam and air-water interface stabilization. Notably, they are often classified into those that are soluble in aqueous systems (albumins and globulins) and those that are not (gliadins and glutenins). However, gliadins are at least to an extent water extractable and thus surface active. We here provide a comprehensive overview of studies investigating the air-water interfacial and foaming properties of the different wheat protein fractions. Characteristics in model systems are related to the functional role that wheat proteins play in gas cell stabilization in existing wheat-based foods (bread dough, cake batter, and beer foam). Still, to further extend the applicability of wheat proteins, and particularly the poorly soluble glutenins, to other food foams, their modification is required. Different physical, (bio)chemical, and other modification strategies that have been utilized to alter the solubility and therefore the air-water interfacial and foaming properties of the gluten protein fraction are critically reviewed. Such approaches may open up new opportunities for the application of (modified) gluten proteins in other food products, such as plant-based meringues, whippable drinks, or ice cream. In each section, important knowledge gaps are highlighted and perspectives for research efforts that could lead to the rational design of wheat protein systems with enhanced functionality and overall an increased applicability in food industry are proposed.

Associating Compositional, Nutritional and Techno-Functional Characteristics of Faba Bean (Vicia faba L.) Protein Isolates and Their Production Side-Streams with Potential Food Applications

Faba beans (Vicia faba L.) show exciting prospects as a sustainable source of protein and fibre, with the potential to transition to a more sustainable food production. This study reveals the compositional, nutritional and techno-functional characteristics of two protein isolates from faba beans (Vicia faba L.), a high-starch fraction and a high-fibre side-stream. During the analysis of those four ingredients, particular attention was paid to the isolates' protein profile and the side-streams' carbohydrate composition. The isoelectric precipitated protein isolate 1 showed a protein content of 72.64 ± 0.31% DM. It exhibited low solubility but superior digestibility and high foam stability. High foaming capacity and low protein digestibility were observed for protein isolate 2, with a protein content of 71.37 ± 0.93% DM. This fraction was highly soluble and consisted primarily of low molecular weight proteins. The high-starch fraction contained 83.87 ± 3.07% DM starch, of which about 66% was resistant starch. Over 65% of the high-fibre fraction was insoluble dietary fibre. The findings of this study provide a detailed understanding of different production fractions of faba beans, which is of great value for future product development.

Versatile wheat gluten: functional properties and application in the food-related industry

Gluten is a key component that allows wheat flour to form a dough, and it is also a byproduct of the production of wheat starch. As a commercial product, wheat gluten is increasingly used in the food-related industry because of its versatile functional properties and wide range of sources. Wheat gluten is manufactured industrially on a large scale through the Martin process and batter process and variants thereof. Gliadin and glutenin impart cohesiveness and elasticity properties, respectively, to wheat gluten. The formation of gluten networks and polymers depends mainly on covalent bonds (disulfide bonds) and noncovalent bonds (ionic bonds, hydrogen bonds, and hydrophobic interactions). The multifunctional properties (viscoelasticity, gelation, foamability, etc.) of wheat gluten are shown by rehydration and other processing techniques. Wheat gluten has been widely used in wheat-based products, food auxiliary agents, food packaging, encapsulation and release of food functional ingredients, food adsorption and heat insulation materials, special purpose foods, and versatile applications. In the future, wheat gluten protein will be used as an important raw material to participate in the development and preparation of various food and degradable materials, and the application potential of wheat gluten in food-related industries will be massive. This review summarizes the main manufacturing processes, composition, and structure of gluten protein, and the various functional properties that support its application in the food and related industries.

Characterization of cooked meat models using grasshopper (Sphenarium purpurascens) soluble protein extracted by alkalisation and ultrasound as meat-extender

The most abundant Orthoptera in Mexico is a small grasshopper (Sphenarium purpurascens) which is considered a food source with increased nutritional value due to its high protein content. Insect proteins have gained relevance because of their high potential as gelling, texturing, and extender agents in the food industry. The objective of this study was to evaluate the effect of substituting meat with a soluble protein extract from grasshopper obtained by alkalisation or alkalisation-piezoelectric ultrasound, on the techno-functional, physicochemical, and sensory characteristics of cooked meat models (sausages). The soluble protein was extracted in NaHCO₃ pH 8 and a piezoelectric ultrasound 5-mm sonotrode at 20 kHz with 99% amplitude. Different formulations with meat substitution: 0%, 5%, 10%, and 15% were prepared and characterised for their rheological behaviour, emulsion stability, weight loss by cooking, total protein content, colour, and texture. Sensory evaluation was conducted with consumers using a test involving check-all-that-apply and overall liking. The alkalisation-piezoelectric ultrasound method improved the solubility and the techno-functional properties of the soluble grasshopper protein when applied in sausages at maximum levels of 10% meat substitution. The sensory evaluation indicated that the formulation with 5% meat substitution exhibited the same acceptability as the control sample. Given these results, the soluble protein treated with alkalisation and piezoelectric ultrasound could be used as an extender in meat products.

Anhydride structures affect the acylation modification and emulsion stabilization ability of mammalian and fish gelatins

In this work, ring-like anhydrides (C4, C5, and C6) with different sizes and succinic anhydrides (C4, C10, C12, C14, and C16) with different side chain lengths were used to modify bovine bone gelatin (BBG) and cold-water fish skin gelatin (CFG), and the effect of acylated gelatins on fish oil-loaded emulsions stability was explored. The results showed that the degree of N-acylation decreased with increased ring sizes or side chain lengths, and the surface hydrophobicity of acylated gelatins increased with increased anhydride carbon numbers. Acylated CFGs had higher droplet stability and lower liquid-gel transition time than acylated BBGs. Only BBG-C12 had a slight increase on the creaming stability among these acylated gelatins. These results demonstrated that the gelatins could be modified by all the anhydrides and their emulsion stabilization ability was dependent on the gelatin type and anhydride structure. The results could be beneficial for protein-based emulsifier development and application.

Effect of Three Defatting Solvents on the Techno-Functional Properties of an Edible Insect (Gryllus bimaculatus) Protein Concentrate

Edible insects have received global attention as an alternative protein-rich food. However, their structural characteristics make them difficult to digest. To overcome this obstacle, we assessed the techno-functional properties of three protein concentrates from the cricket Gryllus bimaculatus. Freeze-dried G. bimaculatus powder was defatted using ethanol, hexene, or acetone as solvents, and the techno-functional properties (protein solubility, water and oil holding capacity, foaming properties, emulsion capacity, and gel formation) of the protein concentrates were determined. Freeze-dried G. bimaculatus powder comprised approximately 17.3% crude fat and 51.3% crude protein based on dry weight. Ethanol was the most effective solvent for reducing the fat content (from 17.30% to 0.73%) and increasing the protein content (from 51.3% to 62.5%) of the concentrate. Techno-functionality properties drastically differed according to the defatting solvent used and foaming properties were most affected. Thus, the techno-functional and whole properties must be considered for proper application of edible insects to achieve global food sustainability.

Plant Proteins for Future Foods: A Roadmap

Protein calories consumed by people all over the world approximate 15-20% of their energy intake. This makes protein a major nutritional imperative. Today, we are facing an unprecedented challenge to produce and distribute adequate protein to feed over nine billion people by 2050, in an environmentally sustainable and affordable way. Plant-based proteins present a promising solution to our nutritional needs due to their long history of crop use and cultivation, lower cost of production, and easy access in many parts of the world. However, plant proteins have comparatively poor functionality, defined as poor solubility, foaming, emulsifying, and gelling properties, limiting their use in food products. Relative to animal proteins, including dairy products, plant protein technology is still in its infancy. To bridge this gap, advances in plant protein ingredient development and the knowledge to construct plant-based foods are sorely needed. This review focuses on some salient features in the science and technology of plant proteins, providing the current state of the art and highlighting new research directions. It focuses on how manipulating plant protein structures during protein extraction, fractionation, and modification can considerably enhance protein functionality. To create novel plant-based foods, important considerations such as protein-polysaccharide interactions, the inclusion of plant protein-generated flavors, and some novel techniques to structure plant proteins are discussed. Finally, the attention to nutrition as a compass to navigate the plant protein roadmap is also considered.

The science of plant-based foods: Constructing next-generation meat, fish, milk, and egg analogs

Consumers are increasingly demanding foods that are more ethical, sustainable and nutritious to improve the health of themselves and the planet. The food industry is currently undergoing a revolution, as both small and large companies pivot toward the creation of a new generation of plant-based products to meet this consumer demand. In particular, there is an emphasis on the production of plant-based foods that mimic those that omnivores are familiar with, such as meat, fish, egg, milk, and their products. The main challenge in this area is to simulate the desirable appearance, texture, flavor, mouthfeel, and functionality of these products using ingredients that are isolated entirely from botanical sources, such as proteins, carbohydrates, and lipids. The molecular, chemical, and physical properties of plant-derived ingredients are usually very different from those of animal-derived ones. It is therefore critical to understand the fundamental properties of plant-derived ingredients and how they can be assembled into structures resembling those found in animal products. This review article provides an overview of the current status of the scientific understanding of plant-based foods and highlights areas where further research is required. In particular, it focuses on the chemical, physical, and functional properties of plant-derived ingredients; the processing operations that can be used to convert these ingredients into food products; and, the science behind the formulation of vegan meat, fish, eggs, and milk alternatives.

Enzymatic modifications of gluten protein: Oxidative enzymes

Oxidative enzymes treat weak flours in order to restore the gluten network of damaged wheat flour and reduce the economic and technological losses. The present review concentrates on oxidative exogenous enzymes (transglutaminase, laccase, glucose oxidase, hexose oxidase) and oxidative endogenous enzymes (tyrosinase, peroxidase, catalase, sulfhydryl oxidase, lipoxygenase, lipase, protein disulfide isomerase, NAD(P)H-dependent dehydrogenase, thioredoxin reductase and glutathione reductase) and their effects on the rheological, functional, and conformational features of gluten and its subunits. Overall, transglutaminase is used in wheat-based foods through introducing isopeptide bonds (ε-γ glutamyl-lysine). Glucose oxidase, hexose oxidase, peroxidase, sulfhydryl oxidase, lipase, and lipoxygenase form disulfide and nondisulfide bonds through producing hydrogen peroxide. Laccase, tyrosinase, and protein disulfide isomerase form cross-links between tyrosine and cysteine residues by generating radicals. Thioredoxin reductase and glutathione reductase create new inter disulfide bonds. The effect of oxidative enzymes on the formation of covalent cross-linkages were substantially more than non-covalent bonds in gluten structure.

Alternative Protein Sources as Technofunctional Food Ingredients

Proteins obtained from alternative sources such as plants, microorganisms, and insects have attracted considerable interest in the formulation of new food products that have a lower environmental footprint and offer means to feed a growing world population. In contrast to many established proteins, and protein fractions for which a substantial amount of knowledge has accumulated over the years, much less information is available on these emerging proteins. This article reviews the current state of knowledge on alternative proteins and their sources, highlighting gaps that currently pose obstacles to their more widespread application in the food industry. The compositional, structural, and functional properties of alternative proteins from various sources, including plants, algae, fungi, and insects, are critically reviewed. In particular, we focus on the factors associated with the creation of protein-rich functional ingredients from alternative sources. The various protein fractions in these sources are described as well as their behavior under different environmental conditions (e.g., pH, ionic strength, and temperature). The extraction approaches available to produce functional protein ingredients from these alternative sources are introduced as well as challenges associated with designing large-scale commercial processes. The key technofunctional properties of alternative proteins, such as solubility, interfacial activity, emulsification, foaming, and gelation properties, are introduced. In particular, we focus on the formation of isotropic and anisotropic structures suitablefor creating meat and dairy product analogs using various structuring techniques. Finally, selected studies on consumer acceptance and sustainability of alternative protein products are considered.

Effect of Acetylation on Physicochemical and Functional Properties of Commercial Pumpkin Protein Concentrate

The purpose of the present study was to determine the effects of acetylation with different doses of acetic anhydride on the chemical composition and chosen functional properties of commercial pumpkin protein concentrate (PPC). The total protein content decreased as compared to unmodified samples. Electrophoretic analysis revealed that in the acetylated pumpkin protein, the content of the heaviest protein (35 kDa) decreased in line with increasing concentrations of modifying reagent. Acetylation of PPC caused a significant increase in water-binding and oil-absorption capacity and for emulsifying properties even at the dose of 0.4 mL/g. Additionally, an increase in foaming capacity was demonstrated for preparations obtained with 2.0 mL/g of acetic anhydride, whereas acetylation with 0.4 and 1.0 mL/g caused a decrease in protein solubility as compared to native PPC.

The effect of redox agents on conformation and structure characterization of gluten protein: An extensive review

Gluten protein as one of the plant resources is affected by redox agent. Chemical modifications by redox agent have myriad advantages mainly short reaction times, no requirement for specialized equipment, low cost, and highly clear modification impacts. The gluten network properties could be influenced through redox agents (oxidative and reducing agents) which are able to alter the strength of dough via different mechanisms for various purposes. The present review examined the impact of different redox compounds on gluten and its subunits based on their effects on their bonds and conformations and thus with their impacts on the physico-chemical, morphological, and rheological properties of gluten and their subunits. This allows for the use of gluten for different of purposes in the food and nonfood industry.

The effect of pre and post-ultrasonication on the aggregation structure and physicochemical characteristics of tapioca starch containing sucrose, isomalt and maltodextrin

The present research investigated the aggregation behaviors of different levels (4, 8 and 12%) of incorporation of sucrose, isomalt and maltodextrin to pre or post- ultrasonication (400 W, 10 min at 60 °C) by fourier transform infrared spectroscopy (FTIR), microstructure by scanning electron microscopy (SEM), water absorption, pasting by rapid visco analysis (RVA), and thermal by differential scanning calorimetry (DSC). FTIR results showed that the aggregation process between polyol and starch after ultrasonication is more effective than before ultrasonication owning to more hydroxyl groups of polyols are engaged with the hydrogen bonds of starch which is more pronounced peaks at 1500-1750 cm^-1, 1700-2700 cm^-1 and 3000-3700 cm^-1. These findings are in line with the results from SEM analysis. The spots, deformations and cross-linking created by the polyols were more significant after ultrasound assisted pregelatinizion. Impact intensity of polyol on starch granule was reduced in the following order: isomalt > sucrose > maltodextrin. RVA profiles showed that through the incorporation of polyols after sonication, were higher in samples pregelatinized in comparison with those before sonication.

Chemical modifications and their effects on gluten protein: An extensive review

Gluten protein as one of the plant resources is susceptible to genetic, physical, chemical, enzymatic and engineering modifications. Chemical modifications have myriad advantages over other treatments, including short reaction times, low cost, no requirement for specialized equipment, and highly clear modification effects. Therefore, chemical modification of gluten can be mainly conducted via acylation, glycosylation, phosphorylation, and deamidation. The present review investigated the impact of different chemical compounds on conformations of gluten and its subunits. Moreover, their effects on the physico-chemical, morphological, and rheological properties of gluten and their subunits were studied. This allows for the use of gluten for a variety of purposes in the food and non-food industry.

Modification of Glutenin and Associated Changes in Digestibility Due to Methylglyoxal during Heat Processing

Glutenin is the main protein of flour and is a very important source of protein nutrition for humans. Methylglyoxal (MGO) is an important product of the Maillard reaction that occurs during the hot-processing of flour products, and it reacts with glutenin to facilitate changes in glutenin properties. Here, the effects of MGO on glutenin digestion during the heating process were investigated using a simulated MGO-glutenin system. MGO significantly reduced the digestibility of glutenin. The structure of MGO-glutenin and physicochemical properties were studied to understand the mechanism of the decrease of digestibility. These data suggest that changes in digestibility were caused by decreases in surface hydrophobicity and increases in disulfide bonds. MGO induces strong aggregation of glutenin after heating that led to the masking of cleavage sites for proteases. Moreover, carbonyl oxidation induced by MGO leads to intermolecular cross-linking of glutenin that increasingly masks or even destroys cleavage sites, further decreasing digestibility.

Effect of ionic strength (NaCl and CaCl2) on functional, textural and electrophoretic properties of native and acetylated gluten, gliadin and glutenin

The main objective of this study was to determine the effects of different ionic strengths (IS) of NaCl and CaCl₂ (0.2, 0.4 and 0.6 at pH=7) on the functional (water holding capacity (WHC), water absorption (WA), emulsifying activity (EA), emulsion stability (ES), textural and electrophoretical properties of native (N) and acetylated (AC) gluten, gliadin and glutenin. According to FT-IR and TNBS methods, the modification extent of wheat gliadin and glutenin were somewhat lower and higher than gluten, respectively. The results indicating that functionality AC glutenin was more than AC gluten and gliadin. NaCl and CaCl₂ had negative impact on WHC, WA, EA and ES of proteins. Different IS of NaCl and CaCl₂ may only alter the molecular conformation of N and AC gluten, gliadin and glutenin without having any significant effect on the molecular weights of these proteins. AC proteins had significantly higher WHC of gels compared to N proteins and also, CaCl₂ could enhance the WHC and hardness of N and AC protein compared with NaCl. Hardness of AC glutenin more impressed than gliadin and gluten due to high degree acetylation.