Composition of Quillaja saponin extract affects lipid oxidation in oil-in-water emulsions

Integrated transcriptome and metabolome analysis provide insights into the mechanism of saponin biosynthesis and its role in alleviating cadmium-induced oxidative damage in Ophiopogon japonicum

Zhe-Maidong, a cultivar of Ophiopogon japonicus is a prominent traditional herbal medicine rich in saponins. This study explored the mechanism of saponin biosynthesis and its role in alleviating Cd-induced oxidative damage in the Zhe-Maidong cultivar using three experimental groups undergoing Cd stress. In the Cd-contaminated soil treatment, total saponins were 1.68 times higher than those in the control. The saponin content in the Cd-2 and Cd-3 treatments was approximately twice as high as that in the Cd-CK treatment. These findings revealed that Cd stress leads to total saponin accumulation. Metabolomic analysis identified the accumulated saponins, primarily several monoterpenoids, diterpenoids, and triterpenoids. The increased saponins exhibited an antioxidant ability to prevent the accumulation of Cd-induced reactive oxygen species (ROS). Subsequent saponin application experiments provided strong evidence that saponin played a crucial role in promoting superoxide dismutase (SOD) activity and reducing ROS accumulation. Transcriptome analysis revealed vital genes for saponin synthesis under Cd stress, including SE, two SSs, and six CYP450s, positively correlated with differentially expressed metabolite (DEM) levels in the saponin metabolic pathway. Additionally, the TF-gene regulatory network demonstrated that bHLH1, bHLH3, mTERF, and AUX/IAA transcript factors are crucial regulators of hub genes involved in saponin synthesis. These findings significantly contribute to our understanding of the regulatory network of saponin synthesis and its role in reducing oxidative damage in O. japonicum when exposed to Cd stress.

TEMPO-Oxidized Nanocellulose Films Modified by Tea Saponin Derived from Camellia oleifera: Physicochemical, Mechanical, and Antibacterial Properties

Nanocellulose materials have been widely used in biomedicine, food packaging, aerospace, composite material, and other fields. In this work, cellulose obtained from Camellia shells through alkali boiling and subbleaching was micro-dissolved and regenerated using the DMAc (N,N-Dimethylacetamide)/LiCl system, and TOCNs (TEMPO-oxidized cellulose nanofibers) with different degrees of oxidation. The membrane was prepared by filtration of polytetrafluoroethylene (pore size 0.1 μm), and the oxidized nanocellulose film was obtained after drying, Then, the crystallinity, mechanical properties and oxygen barrier properties of the TOCN film were investigated. Furthermore, based on TS (tea saponin) from Camellia oleifera seed cake and TOCNs, TS-TOCN film was prepared by the heterogeneous reaction. The TS-TOCN film not only shows excellent oxygen barrier properties (the oxygen permeability is 2.88 cc·m-2·d-1) but also has good antibacterial effects on both Gram-negative and Gram-positive bacteria. The antibacterial property is comparable to ZnO-TOCN with the same antibacterial content prepared by the in-situ deposition method. Antioxidant activity tests in vitro showed that TS-TOCN had a significant scavenging effect on DPPH (2,2-Diphenyl-1-picrylhydrazyl) radicals. This design strategy makes it possible for inexpensive and abundant Camellia oleifera remainders to be widely used in the field of biobased materials.

Plant-Based Oil-in-Water Food Emulsions: Exploring the Influence of Different Formulations on Their Physicochemical Properties

The global focus on incorporating natural ingredients into the diet for health improvement encompasses ω-3 polyunsaturated fatty acids (PUFAs) derived from plant sources, such as flaxseed oil. ω-3 PUFAs are susceptible to oxidation, but oil-in-water (O/W) emulsions can serve to protect PUFAs from this phenomenon. This study aimed to create O/W emulsions using flaxseed oil and either soy lecithin or Quillaja saponins, thickened with modified starch, while assessing their physical properties (oil droplet size, ζ-potential, and rheology) and physical stability. Emulsions with different oil concentrations (25% and 30% w/w) and oil-to-surfactant ratio (5:1 and 10:1) were fabricated using high-pressure homogenization (800 bar, five cycles). Moreover, emulsions were thickened with modified starch and their rheological properties were measured. The physical stability of all emulsions was assessed over a 7-day storage period using the TSI (Turbiscan Stability Index). Saponin-stabilized emulsions exhibited smaller droplet diameters (0.11-0.19 µm) compared to lecithin (0.40-1.30 µm), and an increase in surfactant concentration led to a reduction in droplet diameter. Both surfactants generated droplets with a high negative charge (-63 to -72 mV), but lecithin-stabilized emulsions showed greater negative charge, resulting in more intense electrostatic repulsion. Saponin-stabilized emulsions showed higher apparent viscosity (3.9-11.6 mPa·s) when compared to lecithin-stabilized ones (1.19-4.36 mPa·s). The addition of starch significantly increased the apparent viscosity of saponin-stabilized emulsions, rising from 11.6 mPa s to 2117 mPa s. Emulsions stabilized by saponin exhibited higher stability than those stabilized by lecithin. This study confirms that plant-based ingredients, particularly saponins and lecithin, effectively produce stable O/W emulsions with flaxseed oil, offering opportunities for creating natural ingredient-based food emulsions.

Perspectives on Saponins: Food Functionality and Applications

Saponins are a diverse group of naturally occurring plant secondary metabolites present in a wide range of foods ranging from grains, pulses, and green leaves to sea creatures. They consist of a hydrophilic sugar moiety linked to a lipophilic aglycone, resulting in an amphiphilic nature and unique functional properties. Their amphiphilic structures enable saponins to exhibit surface-active properties, resulting in stable foams and complexes with various molecules. In the context of food applications, saponins are utilized as natural emulsifiers, foaming agents, and stabilizers. They contribute to texture and stability in food products and have potential health benefits, including cholesterol-lowering and anticancer effects. Saponins possess additional bioactivities that make them valuable in the pharmaceutical industry as anti-inflammatory, antimicrobial, antiviral, and antiparasitic agents to name a few. Saponins can demonstrate cytotoxic activity against cancer cell lines and can also act as adjuvants, enhancing the immune response to vaccines. Their ability to form stable complexes with drugs further expands their potential in drug delivery systems. However, challenges such as bitterness, cytotoxicity, and instability under certain conditions need to be addressed for effective utilization of saponins in foods and related applications. In this paper, we have reviewed the chemistry, functionality, and application aspects of saponins from various plant sources, and have summarized the regulatory aspects of the food-based application of quillaja saponins. Further research to explore the full potential of saponins in improving food quality and human health has been suggested. It is expected that this article will be a useful resource for researchers in food, feed, pharmaceuticals, and material science.

Effects of Quillaja Saponin on Physicochemical Properties of Oil Bodies Recovered from Peony (Paeonia ostii) Seed Aqueous Extract at Different pH

Peony seeds, an important oil resource, have been attracting much attention because of α-linolenic acid. Oil bodies (OBs), naturally pre-emulsified oils, have great potential applications in the food industry. This study investigated the effects of extraction pH and Quillaja saponin (QS) on the physicochemical properties of peony oil body (POB) emulsions. POBs were extracted from raw peony milk at pH 4.0, 5.0, 6.0, and 7.0 (named pH 4.0-, 5.0-, 6.0-, and 7.0-POBs). All POBs contained extrinsic proteins and oleosins. The extrinsic proteins of pH 4.0- and pH 5.0-POB were 23 kDa and 38 kDa glycoproteins, the unknown proteins were 48 kDa and 60 kDa, while the 48 kDa and 38 kDa proteins were completely removed under the extraction condition of pH 6.0 and 7.0. The percentage of extrinsic proteins gradually decreased from 78.4% at pH 4.0-POB to 33.88% at pH 7.0-POB, while oleosin contents increased. The particle size and zeta potential of the POB emulsions decreased, whereas the oxidative stability, storage stability, and pI increased with the increasing extraction pH. QS (0.05~0.3%) increased the negative charges of all the POB emulsions, and 0.1% QS significantly improved the dispersion, storage, and the oxidative stability of the POB emulsions. This study provides guidance for selecting the proper conditions for the aqueous extraction of POBs and improving the stability of OB emulsions.

Comparison of the Effects of Yucca saponin, Yucca schidigera, and Quillaja saponaria on Growth Performance, Immunity, Antioxidant Capability, and Intestinal Flora in Broilers

The purpose of this study is to investigate the effects of Yucca saponin (YSa), Yucca schidigera (YS), and Quillaja Saponaria (QS) on growth performance, nitrogen metabolism, immune ability, antioxidant capability, and intestinal flora of yellow-feather broilers. This study randomly divided a total of 480 1-day yellow-feather broilers into 4 treatment groups. Factors in the 4 groups included CON group (basic diet), YSa group (basic diet mixed with 500 mg/kg YSa), YS group (basic diet mixed with 500 mg/kg YS), and QS group (basic diet mixed with 500 mg/kg QS). Throughout the 56-day study period, YSa, YS, and QS groups had higher average daily gain in broilers than the CON group (p < 0.01). The YS group had a lower feed gain ratio (F: G) in broilers than the CON group (p < 0.05). YSa, YS, and QS showed increased serum immunoglobin A (IgA), immunoglobin Y (IgY), immunoglobin M (IgM), and total antioxidant capacity (T-AOC) levels; enhanced acetic acid, butyric acid, and valeric acid levels of cecal content; and reduced contents of ammonia nitrogen, urea nitrogen, interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), and malondialdehyde (MDA) in serum in broilers (p < 0.05). The relative abundance of Lachnoclostridium in the QS group was decreased compared with that in the CON group (p < 0.05). Higher IgA and IgY sera contents were observed in the YS group compared to the YSa and QS groups (p < 0.05). In contrast with the QS group, the serum IL-6 concentration of the YS group was reduced (p < 0.05). In conclusion, YSa, YS, and QS promoted growth performance, nitrogen metabolism, immunity, antioxidant capability, and intestinal flora in broilers. Through the comparison of YSa, YS, and QS, it was found that YS is more suitable as a feed additive to ameliorate the healthy growth of broilers.

Comparison between Quinoa and Quillaja saponins in the Formation, Stability and Digestibility of Astaxanthin-Canola Oil Emulsions

Saponins from Quillaja saponaria and Chenopodium quinoa were evaluated as natural emulsifiers in the formation of astaxanthin enriched canola oil emulsions. The aim of this study was to define the processing conditions for developing emulsions and to evaluate their physical stability against environmental conditions: pH (2–10), temperature (20–50 °C), ionic strength (0–500 mM NaCl), and storage (35 days at 25 °C), as well as their performance in an in vitro digestion model. The emulsions were characterized, evaluating their mean particle size, polydispersity index (PDI), and zeta potential. Oil-in-water (O/W) emulsions were effectively produced using 1% oil phase and 1% emulsifier (saponins). Emulsions were stable over a wide range of pH values (4–10), but exhibited particle aggregation at lower pH, salt conditions, and high temperatures. The emulsion stability index (ESI) remained above 80% after 35 days of storage. The results of our study suggest that saponins can be an effective alternative to synthetic emulsifiers.

Saponins as Natural Emulsifiers for Nanoemulsions

The awareness of sustainability approaches has focused attention on replacing synthetic emulsifiers with natural alternatives when formulating nanoemulsions. In this context, a comprehensive review of the different types of saponins being successfully used to form and stabilize nanoemulsions is presented, highlighting the most common natural sources and biosynthetic routes. Processes for their extraction and purification are also reviewed altogether with the recent advances for their characterization. Concerning the preparation of the nanoemulsions containing saponins, the focus has been initially given to screening methods, lipid phase used, and production procedures, but their characterization and delivery systems explored are also discussed. Most experimental outcomes showed that the saponins present high performance, but the challenges associated with the saponins' broader application, mainly the standardization for industrial use, are identified. Future perspectives report, among others, the emerging biotechnological processes and the use of byproducts in a circular economy context.

Design of nanoemulgel using Argania spinosa microfibrillated cellulose and natural emulsifiers foreseeing melanogenesis enhancement

Nanotechnology is a route of choice that improves administration and efficacy of bioactive compounds. In this study, nanoemulgels were prepared using microfibrillated cellulose from Argania spinosa shell (AS-MFC) and Argan shell (ASE) or Argan press cake extracts (APC) as natural emulsifiers. Oil-in-water (O/W) nanoemulsions were prepared using different natural emulsifiers or synthetic emulsifiers and presented a nano size (d_3,2 < 140 nm). Following that, the nanoemulsions were incorporated within AS-MFC matrix and rheological properties confirmed a shear thinning behavior. Confocal micrographs of nanoemulgels confirmed the dispersion of nanoemulsions in the AS-MFC network without affecting the nanoemulsions stability. Finally, in vitro bioassay on B16F10 using ASE or APC nanoemulsions was conducted. This study confirmed cell permeation in B16F10 cells of formulated nanoemulsions and the upregulation of melanin content up to 30% more that the untreated cells. This study designed novel MFC nanoemulgel with high potential application in healthcare and cosmetic field.

Recent Advances and Applications of Plant-Based Bioactive Saponins in Colloidal Multiphase Food Systems

The naturally occurring saponins exhibit remarkable interfacial activity and also possess many biological activities linking to human health benefits, which make them particularly attractive as bifunctional building blocks for formulation of colloidal multiphase food systems. This review focuses on two commonly used food-grade saponins, Quillaja saponins (QS) and glycyrrhizic acid (GA), with the aim of clarifying the relationship between the structural features of saponin molecules and their subsequent self-assembly and interfacial properties. The recent applications of these two saponins in various colloidal multiphase systems, including liquid emulsions, gel emulsions, aqueous foams and complex emulsion foams, are then discussed. A particular emphasis is on the unique use of GA and GA nanofibrils as sole stabilizers for fabricating various multiphase food systems with many advanced qualities including simplicity, ultrastability, stimulability, structural viscoelasticity and processability. These natural saponin and saponin-based colloids are expected to be used as sustainable, plant-based ingredients for designing future foods, cosmetics and pharmaceuticals.

Synthesis, characterization and stress-testing of a robust quillaja saponin stabilized oil-in-water phytocannabinoid nanoemulsion

BACKGROUND

This study describes the design, optimization, and stress-testing of a novel phytocannabinoid nanoemulsion generated using high-pressure homogenization. [Formula: see text], a plant-derived commercial emulsifier containing quillaja saponin, was used to stabilize the lipid phase droplets in water. Stress-testing was performed on this nanoemulsion in order to evaluate its chemical and colloidal stability under the influence of different environmental factors, encompassing both physical and chemical stressors.

METHODS

Extensive optimization studies were conducted to arrive at an ideal nanoemulsion formulation. A coarse emulsion containing 16.6 wt% CBD-enriched cannabis distillate and 83.4 wt% carrier (soybean) oil dispersed in 10 wt% [Formula: see text] (1.5 wt% quillaja saponin) solution after 10 homogenization cycles at a pressure of 30,000 psi produced a stable nanoemulsion. This nanoemulsion was then subjected to the stress studies.

RESULTS

The optimized nanoemulsion had an average droplet diameter of ca. 120 nm and average droplet surface ζ potentials of ca. -30 mV. It was imaged and characterized by a variety of protocols. It proved to be stable to droplet agglomeration and phase separation upon storage under ambient conditions for 6 weeks, as well as under a variety of physical stressors such as heat, cold, dilution, and carbonation. pH values ≤2 and moderately high salt concentrations (> 100 mM), however, destabilized the nanoemulsion, eventually leading to phase separation. Cannabis potency, determined by HPLC, was detrimentally affected by any changes in the nanoemulsion phase stability.

CONCLUSIONS

Quillaja saponin stabilized cannabidiol(CBD)-enriched nanoemulsions are stable, robust systems even at low emulsifier concentrations, and are therefore significant from both a scientific as well as a commercial perspective.

Can Yucca schidigera Be Used to Enhance the Growth Performance, Nutrient Digestibility, Gut Histomorphology, Cecal Microflora, Carcass Characteristic, and Meat Quality of Commercial Broilers Raised under Tropical Conditions?

This study aims to study the effect of Yucca shidigera as a phytobiotic supplementation in enhancing the production performance of commercial broilers reared under tropical environments. A total of 300 male day-old Ross 308 broiler chicks were randomly allocated into six treatment groups. Treatment 1 broilers were fed with commercial diets without antibiotics. Treatment 2 broilers were fed with commercial diets added with 100 mg/kg oxytetracycline antibiotic. Treatment 3, 4, 5, and 6 were fed with the same commercial diets added with 25, 50, 75, and 100 mg/kg Y. shidigera, respectively, without antibiotic. Throughout the six weeks study period, body weight and feed intake were recorded weekly for each replicate to calculate the body weight gain and feed conversion ratio. In addition, the nutrient digestibility, gut histomorphology, cecal microflora population, carcass characteristics, and meat quality were determined. The results showed significant differences (p < 0.05) in the growth performance, apparent ileal nutrient digestibility, gut histomorphology, carcass traits, and meat quality. Overall, T6 broilers supplemented with 100 mg/kg Y. shidigera demonstrated the best production performances as compared to the other treatment broilers. In summary, information from this study will be valuable for the usability of Y. schidigera, which could be developed as a feed additive to replace antibiotics in the poultry sector in the tropics.

How Does Mechanical Pearling Affect Quinoa Nutrients and Saponin Contents?

Agriculture is facing many challenges, such as climate change, drought, and salinity, which call for urgent interventions for fast adaptation and crop diversification. The introduction of high-value and stress tolerant crops such as quinoa would be a judicious solution to overcome constraints related to abiotic stress and to increase land productivity and farmers’ incomes. The implementation of quinoa in Morocco has not been supported by a full valorization program to control the quality of quinoa seeds. The novelty of this work is to assess the pearling operation as an efficient method of saponins removal as well as the determination of total residual saponins. This study aimed to evaluate the effects of several pearling durations on nutrient and saponin content of quinoa seeds of three tested varieties (Puno, Titicaca, and ICBA-Q5). Five pearling durations were tested (0, 2, 4, 6, 7, and 8 min) using a locally manufactured pearling machine. The results indicated that a pearling duration of two minutes was enough to reduce total saponin content from 0.49% to 0.09% for Puno variety, from 0.37% to 0.07% for Titicaca variety, and from 0.57% to 0.1% for ICBA-Q5 variety. Our results showed that pearling slightly reduced protein, total fat, and moisture contents for all varieties except for Puno, where total fat content slightly increased with the pearling. Puno variety had the highest seed content in terms of protein and total fat; the ICBA-Q5 variety had the lowest. Titicaca had the highest bran content in terms of protein and total fat, ICBA-Q5 had the highest bran content in terms of ash and the lowest bran content in terms of protein and total fat, and Puno had the lowest bran content in terms of ash. Pearling had no significant effect on macronutrient contents in the processed seed, but it resulted in a very highly significant difference for most of them in the bran except for Mg and S. Regarding seed content in terms of micro-nutrients, statistical analysis showed significant differences between varieties in terms of Zn, Cu, and Mn contents, but no significant difference was recorded for Fe or B. Pearling had no significant effect on seed micronutrient contents. Therefore, to retain maximum nutritional content in the quinoa and maintain quinoa integrity, it is necessary to limit the pearling duration of quinoa to two minutes, which is enough to reduce saponin content below the Codex Standard threshold (0.12%).

Polymeric matrix hydrophobicity governs saponin packing-density on nanoparticle surface and the subsequent biological interactions

This study investigated the loading behavior of Quillaja saponin as a model surface-active cargo on (NP) nanoparticles prepared with various hydrophobic polymers and using different organic solvents through emulsification/solvent evaporation, and the impact of NP surface hydrophobicity upon the cytotoxic and hemolytic properties of the loaded entity. A superficial monolayered arrangement of saponins on NP was established (R² > 0.9) for all NP, as the saponin loading values complied with the Langmuir adsorption isotherm over the entire concentration range. Next, based on the measurement of interfacial tension between formulation phases, and the subsequent use of Gibb's adsorption isotherm, the packing density (Г_exc) and loading of saponins on various nanospheres could be predicted with good correlation with the actual values (R² > 0.95). The results demonstrated that the hydrophobicity of the polymeric matrix was the major determinant of saponin packing density on the nanospheres. Finally, the impact of NP surface properties upon saponin biological interactions was investigated, where a linear correlation was found between the NP surface hydrophobicity and their hemolytic properties (R² ≅ 0.79), and cytotoxicity against two cancer cell lines (R² > 0.76). The surface hydrophobicity of the polymeric NP seemingly governed the NP-cell membrane binding, which in turn determined the amount of membrane-bound saponins per unit NP surface area. As the saponins exert their cytotoxicity mainly through strong permeabilization of the cell membrane, a higher amount of NP-membrane association governed by a more hydrophobic matrix can lead to higher levels of cytotoxicity. These findings highlight the importance of a detailed characterization of NP surface properties, particularly in case of surface-active cargos, for these dictate the side effects and biological interactions of the delivery system.

Plant Secondary Metabolites: An Opportunity for Circular Economy

Moving toward a more sustainable development, a pivotal role is played by circular economy and a smarter waste management. Industrial wastes from plants offer a wide spectrum of possibilities for their valorization, still being enriched in high added-value molecules, such as secondary metabolites (SMs). The current review provides an overview of the most common SM classes (chemical structures, classification, biological activities) present in different plant waste/by-products and their potential use in various fields. A bibliographic survey was carried out, taking into account 99 research articles (from 2006 to 2020), summarizing all the information about waste type, its plant source, industrial sector of provenience, contained SMs, reported bioactivities, and proposals for its valorization. This survey highlighted that a great deal of the current publications are focused on the exploitation of plant wastes in human healthcare and food (including cosmetic, pharmaceutical, nutraceutical and food additives). However, as summarized in this review, plant SMs also possess an enormous potential for further uses. Accordingly, an increasing number of investigations on neglected plant matrices and their use in areas such as veterinary science or agriculture are expected, considering also the need to implement "greener" practices in the latter sector.

Natural Surfactant Saponin from Tissue of Litsea glutinosa and Its Alternative Sustainable Production

In this research, we assessed the detergency properties along with chemical characteristic of the surfactant extracts from the most frequently cited detergent plants in Northern Thailand, namely, Sapindus rarak, Acacia concinna, and Litsea glutinosa. Moreover, as to provide the sustainable option for production of such valuable ingredients, plant tissue culture (PTC) as alternative method for industrial metabolite cultivation was also proposed herein. The results illustrated that detergent plant extracts showed moderate in foaming and detergency abilities compared with those of synthetic surfactant. The phytochemical analysis illustrated the positive detection of saponins in L. glutinosa plant extracts. The highest callus formation was found in L. glutinosa explant cultured with MS medium supplemented with 2.0 mg/L Indole-3-acetic acid (IAA). The callus extract was chemical elucidated using chromatography, which illustrated the presence of saponin similar to those from the crude leaf and Quillaja saponin extracts. Compact mass spectrometry confirmed that the surfactant was of the steroidal diagnostic type.

Improving curcumin solubility and bioavailability by encapsulation in saponin-coated curcumin nanoparticles prepared using a simple pH-driven loading method

Curcumin is a bioactive phytochemical that can be utilized as a nutraceutical or pharmaceutical in functional foods, supplements, and medicines. However, the application of curcumin as a nutraceutical in commercial food and beverage products is currently limited by its low water-solubility, chemical instability, and poor oral bioavailability. In this study, all-natural colloidal delivery systems were developed to overcome these challenges, which consisted of saponin-coated curcumin nanoparticles formed using a pH-driven loading method. The physicochemical and structural properties of the curcumin nanoparticles formed using this process were characterized, including particle size distribution, surface potential, morphology, encapsulation efficiency, and loading capacity. Fourier transform infrared spectroscopy and X-ray diffraction indicated that curcumin was present in the nanoparticles in an amorphous form. The curcumin nanoparticles were unstable to aggregation at low pH values (<3) and high NaCl concentrations (>200 mM), which was attributed to a reduction in electrostatic repulsion between them. However, they were stable at higher pH values (3 to 8) and lower NaCl levels (0 to 200 mM), due to a stronger electrostatic repulsion between them. They also exhibited good stability during refrigerated storage (4 °C) or after conversion into a powdered form (lyophilized). A simulated gastrointestinal tract study demonstrated that the in vitro bioaccessibility was around 3.3-fold higher for curcumin nanoparticles than for free curcumin. Furthermore, oral administration to Sprague Dawley rats indicated that the in vivo bioavailability was around 8.9-fold higher for curcumin nanoparticles than for free curcumin. These results have important implications for the development of curcumin-enriched functional foods, supplements, and drugs.

Interfacial Antioxidants: A Review of Natural and Synthetic Emulsifiers and Coemulsifiers That Can Inhibit Lipid Oxidation

There has been strong interest in developing effective strategies to inhibit lipid oxidation in emulsified food products due to the need to incorporate oxidatively labile bioactive lipids, such as ω-3 fatty acids, conjugated linoleic acids, or carotenoids. Emulsifiers or coemulsifiers can be utilized to inhibit lipid oxidation in emulsions. Both of these molecular types can adsorb to droplet surfaces and inhibit lipid oxidation, but emulsifiers can also stabilize droplets against aggregation whereas coemulsifiers cannot. There are a host of existing emulsifiers, covalent conjugates, or physical complexes that have the potential to inhibit lipid oxidation by a variety of mechanisms. Existing emulsifiers with antioxidant potential consist of surfactants, phospholipids, proteins, polysaccharides, and colloidal particles. Conjugates and complexes are typically formed by covalently or physically linking together a surface-active molecule with an antioxidant molecule. This article reviews the molecular and physicochemical basis for the surface and antioxidant activities of emulsifiers and coemulsifiers, highlights the important properties of interfacial layers that can be engineered to control lipid oxidation, and outlines different kinds of existing emulsifiers, conjugates, and complexes that can be used to inhibit oxidation.

Effect of Leaves of Caesalpinia decapetala on Oxidative Stability of Oil-in-Water Emulsions

Caesalpinia decapetala (Roth) Alston (Fabaceae) (CD) is used in folk medicine to prevent colds and treat bronchitis. This plant has antitumor and antioxidant activity. The antioxidant effects of an extract from Caesalpinia decapetala (Fabaceae) were assessed by storage of model food oil-in-water emulsions with analysis of primary and secondary oxidation products. The antioxidant capacity of the plant extract was evaluated by the diphenylpicrylhydrazyl (DPPH), Trolox equivalent antioxidant capacity (TEAC), oxygen radical absorbance capacity (ORAC) and ferric reducing antioxidant power (FRAP) assays and by electron paramagnetic resonance (EPR) spectroscopy. Lyophilized extracts of CD were added at concentrations of 0.002%, 0.02% and 0.2% into oil-in-water emulsions, which were stored for 30 days at 33 ± 1 °C, and then, oxidative stability was evaluated. The CD extract had high antioxidant activity (700 ± 70 µmol Trolox/g dry plant for the ORAC assay), mainly due to its phenolic components: gallic acid, quercetin, catechin, 4-hydroxybenzoic acid and p-coumaric acid. At a concentration of 0.2%, the extract significantly reduced the oxidative deterioration of oil-in-water emulsions. The results of the present study show the possibility of utilizing CD as a promising source of natural antioxidants for retarding lipid oxidation in the food and cosmetic industries.