Physical stability, microstructure and micro-rheological properties of water-in-oil-in-water (W/O/W) emulsions stabilized by porcine gelatin

Investigating the influence of myofibrillar protein and chitosan interfacial distribution on the macroscopic characteristics of emulsions

Myofibrillar protein (MP) and chitosan (CS) complexes, formed through electrostatic interactions, hold promise for creating novel emulsions. This study examines the emulsion system utilizing MP and CS as interfacial phases, exploring the distribution patterns of MP-CS (external MP), CS-MP (external CS), and pre-compounded MP/CS, along with varying MP-to-CS concentration ratios (5:1 to 1:5). MP/CS emulsions exhibited finer particle size and higher zeta potential compared to MP-CS and CS-MP bilayer emulsions, with the 1:1 ratio displaying optimal stability. Confocal laser scanning microscopy confirmed uniform dispersion at the 1:1 ratio, while other ratios showed increased flocculation. MP/CS emulsions demonstrated superior stability and less delamination than bilayer emulsions. Microrheological analysis revealed concentration-dependent elasticity and viscosity trends, with MP-CS emulsions being more elastic but less viscous than CS-MP emulsions. The viscoelastic properties of MP/CS emulsions were intermediate. These findings offer valuable insights into the design of interfaces for muscle protein and polysaccharide complex emulsions.

Sugar-based emulsifiers: Sustainable molecules with great potential

The demand for foods, cosmetics, personal hygiene products, cleaning products, and pharmaceutical products is increasing globally. These common products are widely used in homes and workplaces. On the other hand, increasing production has raised global warming and environmental issues, necessitating the finding of new sustainable solutions. As a result, industries are attempting to discover new bioactive ingredients from nature as alternatives to synthetic ones. This review covers some of the main categories of natural sugar-based surfactants (sugar derivatives and alkyl polyglucosides) as prospective emulsifiers, their preparation methods, and potential applications. Various production routes for mono- and polysaccharide-based emulsifiers and their advantages for the industry are highlighted. The readers will be able to approach the synthesis of sugar-based emulsifiers and their use in the food, pharmaceutical, personal care, and cosmetic industries. The synthetic methods use natural ingredients to generate emulsifiers with desired biodegradability and ecotoxicology profiles. In this review, we have compiled and described the present synthetic methodologies for sugar-based emulsifiers and their applications in various fields.

Construction of fucoxanthin-loaded multi-functional pea protein isolate-fucoidan nanoparticles at neutral pH: Structural characterization and functional verification

Fucoxanthin (FX), a marine-origin carotenoid, possesses various physiological activities. However, FX has instability and low water solubility. Encapsulation using nanoparticles effectively addresses these challenges. Nanoparticles loaded with FX were fabricated using a pH-driven method, with pea protein isolate (PPI) and fucoidan (FUC) serving as the raw materials. The optimal nanoparticles were prepared at pH = 7.0 with a PPI:FUC = 1:3, yielding a particle size of 166.60 ± 0.55 nm and a zeta potential of -40.88 ± 0.68 mV. The formation of FX@PPI/FUC nanoparticles were primarily driven by hydrogen bonding and hydrophobic interactions. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and fluorescence spectroscopy were used to research structure of nanoparticle and interaction during the formation. The FX@PPI/FUC nanoparticles demonstrated excellent thermal and pH stability in neutral and alkaline environments, effectively released FX and showcased antioxidant properties. Additionally, a W/O/W FX@PPI-FUC Pickering emulsion was formulated, containing 65 % of the oil phase, which exhibited a favorable particle size of 26.5 ± 0.28 μm and a zeta potential of -67.2 ± 0.94 mV. Furthermore, the FX@PPI-FUC Pickering emulsion demonstrated outstanding thermal and storage stability, indicating its potential for application in functional food.

Physical stability of oil-in-water multi-layered coenzyme Q10 nano-emulsions

As a lipophilic antioxidant, coenzyme Q10 (CoQ10) has limited application owing to its low water solubility and instability. In the present study, potato protein (PP) and soybean soluble polysaccharide (SSPS) were used as carriers to prepare a multilayer SSPS-PP-CoQ10 nano-emulsion using the reversed-phase emulsification method; further, the water solubility, stability, and formation mechanism of the nano-emulsion were analyzed. The results showed that the particle size of SSPS-PP-CoQ10 nano-emulsions was 253-422 nm with good polydispersity. The encapsulation efficiency (EE) could reach up to 88.87 %. When the concentration of SSPS was 0.1 wt%, the decrease in interfacial tension and increase in viscoelasticity indicated that nano-emulsion improved CoQ10 physical stability. SSPS incorporation altered the microscopic environment of the hydrophobic residues, rendering them more hydrophilic and enhancing their water solubility. According to molecular docking results, hydrogen bonds promote binding among SSPS, PP, and CoQ10, and increase emulsion stability.

Characterization and Pickering emulsifying ability of Adinandra nitida leaf polysaccharides

Herein, Adinandra nitida leaf polysaccharides (ANPs) were isolated, identified, and used as a particle emulsifier to stabilize Pickering emulsions. ANP was identified as a polysaccharide with a weight-average molecular weight of 383.10 ± 8.57 kDa that was mainly composed of galacturonic acid (43.94 ± 3.63 mol%), arabinose (17.44 ± 1.06 mol%), glucose (8.53 ± 0.65 mol%), and rhamnose (4.88 ± 0.32 mol%). The main glycosidic linkages included t-Ara(f)-(1→, →4)-Gal(p)-(1→, and →4)-Gal(p)-UA-(1→, with molar percentage ratios of 8.97 %, 19.68 %, and 47.05 %, respectively. ANP possessed a reducing power and ABTS radical scavenging ability. ANP could also reduce the interfacial tension between medium-chain triglycerides (MCT) and water in a concentration-dependent manner, demonstrating its emulsifying role. When the addition amount (c) ≥ 3 %, ANP could stabilize the O/W-type MCT-based Pickering emulsion gel with an oil-phase volume fraction of 70 %, and c was proportional to mechanical parameters such as gel strength, macroscopic viscosity index, and elastic index.

Structural and functional optimization of egg white protein hydrogels by succinylation: Gel properties and mineral enrichment

The development of novel gel-mineral supplements is important for improving the health of patients with dysphagia. In this study, we used natural egg white protein (NEWP) and phosphorylated egg white protein (STEWP) as controls. We modified NEWP with succinic anhydride to produce varying degrees of succinylated egg white protein (SAEWP). The addition of 20 % (w/v) succinic anhydride increased the β-sheet content of SAEWP from 11.97 % to 50.60 %, which stabilized the gel structure and formed a uniformly ordered three-dimensional network, resulting in the average pore size of SAEWP could reach >80 μm. Compared to NEWP, SAEWP hydrogel with 20 % succinic anhydride showed a 22.27 % increase in water holding capacity, a 56.13 % increase in hardness, and a 173.01 % increase in elasticity. Immersion in a calcium chloride solution resulted in a 220 % increase in calcium content. This study provides new insights into the development of innovative gel mineral supplements.

Egg White-Based Gels with Candelilla Wax: A Study of Rheological, Mechanical, Calorimetric and Microstructural Properties

Bigels (BGs) are innovative composite systems that integrate oleogel and hydrogel structures, and are gaining increasing attention for their unique textural and functional properties in food applications. This study evaluated the rheological and mechanical properties of egg white-based bigels incorporating candelilla wax (CW) as an oleogelator. The results indicate that different egg white protein (EWP) (5-10%) concentrations and hydrogel-to-oleogel ratios (20:80 to 80:20) significantly influenced the structural and functional properties of the bigels. Compression testing revealed no significant differences in strength across the tested range; however, higher EWP concentrations enhanced the stability of the BGs. Furthermore, increased candelilla wax oleogel (CWO) content (60%) markedly improved emulsion stability, resulting in superior strength, as confirmed by dynamic light scattering. Rheological studies demonstrated shear-thinning behavior, particularly at higher hydrogel content related to the oleogel (W/O), which exhibited the highest yield stress. Microstructural investigations confirmed the presence of a continuous oleogel phase within the bigels (W/O) and revealed the formation of a complex structure. These findings suggest that a reduced hydrogel-to-oleogel ratio can be utilized across various food systems, opening new possibilities for creating customized food structures with desirable textural and functional attributes.

Fabrication of the W1/O/W2 emulsions loaded with Torreya grandis protein hydrolysate/polysaccharide complexes in the internal water: Characterization and stability

In this study, the effect of Torreya grandis protein enzymatic hydrolysates (TGPH)/alginate dialdehyde (ADA) complexes in the internal aqueous phase on the physical stability of the water-in-oil-in-water (W1/O/W2) emulsions was studied. In the case of TGPH/ADA emulsions, the presence of ADA decreased the apparent viscosity of the emulsions and changed the flow behavior from shear thinning to Newtonian, leading to a decrease in volume-weighted average droplet diameter (D43) of the emulsions. Additionally, the emulsions at the TGPH/ADA ratios of 1:1 showed a lower turbiscan stability index (TSI) value, and smaller change in delta backscattering signal, compared to the emulsions. The enhanced pH stability and storage stability of the emulsions at the TGPH/ADA ratios of 1:1 was due to the formation of Schiff bases between TGPH and ADA. These results suggested that the covalent cross-linking of TGPH with ADA could significantly improve the stability of the emulsions, which provided an effective means for the development of new food-grade protein-polysaccharide complexes stabilized emulsions.

The Preparation of W/O/W High-Internal-Phase Emulsions as Coagulants for Tofu: The Effect of the Addition of Soy Protein Isolate in the Internal Water Phase

Tofu quality is determined by a controlled coagulation process using a W/O/W emulsion coagulant. The impact of adding soy protein isolate (SPI) to the inner water phase on the stability of W/O/W high-internal-phase emulsions (HIPEs) and its application as a coagulant for tofu was assessed. No creaming occurred during 7-day storage with SPI concentrations up to 0.3%, while the emulsion droplets aggregated with 0.5% and 0.7% SPI. Emulsions containing 0.3% SPI maintained a constant mean droplet size after 21 days of storage and exhibited the lowest TURBISCAN stability index value. HIPE stability against freeze-thaw cycles improved after heating. HIPEs with SPI concentrations above 0.3% demonstrated an elastic gel-like behavior. The increased viscosity and aggregation of the protein around droplets indicated that the interaction among emulsion droplets could enhance stability. W/O/W HIPE coagulants significantly increased tofu yield, reduced hardness, and produced a more homogenous tofu gel compared to a MgCl2 solution. The HIPE with 0.3% SPI was found to be optimal for use as a coagulant for tofu.

Enhancing the stability of O/W emulsions by the interactions of casein/carboxymethyl chitosan and its application in whole nutrient emulsions

The influence of Carboxymethyl chitosan (CMCS) on the emulsification stability mechanism of casein (CN) and its effects on the stability of whole nutrient emulsions were investigated. The complex solutions of CN and CMCS were prepared and the turbidity, ultraviolet (UV) absorption spectrum, fluorescence spectrum, circular dichroism (CD) spectrum, Fourier transform infrared (FTIR) spectrum, interfacial tension and microstructural observations were used to study the inter-molecular interaction of CMCS and CN. The effects of CMCS on the emulsion stability of CN were further analyzed by particle size, ζ-potential, instability index and rheological properties. Moreover, the accelerated stability of whole nutrient emulsions prepared by CMCS and CN was evaluated. The results revealed that CN-CMCS complexes were mainly formed by hydrogen bonding. The stability of the CN-CMCS composite emulsions were improved, as evidenced by the interfacial tension decreasing from 165.96 mN/m to 158.49 mN/m, the particle size decreasing from 45.85 μm to 12.98 μm, and the absolute value of the potential increasing from 29.8 mV to 33.5 mV. The stability of whole nutrient emulsion was also significantly enhanced by the addition of CN-CMCS complexes. Therefore, CN-CMCS complex could be served as a novel emulsifier to improve the stability of O/W emulsions.

Different interfaces for stabilizing liquid-liquid, liquid-gel and gel-gel emulsions: Design, comparison, and challenges

Interfaces play essential roles in the stability and functions of emulsion systems. The quick development of novel emulsion systems (e.g., water-water emulsions, water-oleogel emulsions, hydrogel-oleogel emulsions) has brought great progress in interfacial engineering. These new interfaces, which are different from the traditional water-oil interfaces, and are also different from each other, have widened the applications of food emulsions, and also brought in challenges to stabilize the emulsions. We presented a comprehensive summary of various structured interfaces (stabilized by mixed-layers, multilayers, particles, nanodroplets, microgels etc.), and their characteristics, and designing strategies. We also discussed the applicability of these interfaces in stabilizing liquid-liquid (water-oil, water-water, oil-oil, alcohol-oil, etc.), liquid-gel, and gel-gel emulsion systems. Challenges and future research aspects were also proposed regarding interfacial engineering for different emulsions. Emulsions are interface-dominated materials, and the interfaces have dynamic natures, as the compositions and structures are not constant. Biopolymers, particles, nanodroplets, and microgels differed in their capacity to get absorbed onto the interface, to adjust their structures at the interface, to lower interfacial tension, and to stabilize different emulsions. The interactions between the interface and the bulk phases not only affected the properties of the interface, but also the two phases, leading to different functions of the emulsions. These structured interfaces have been used individually or cooperatively to achieve effective stabilization or better applications of different emulsion systems. However, dynamic changes of the interface during digestion are only poorly understood, and it is still challenging to fully characterize the interfaces.

Studies on the Properties and Stability Mechanism of Double Emulsion Gels Prepared by Heat-Induced Aggregates of Egg White Protein-Oligosaccharides Glycosylation Products

Multiple emulsions can dissolve some substances with different properties, such as hydrophilicity and lipophilicity, into different phases. They play an important role in protection, controlled release and targeted release of the encapsulated substances. However, it's poor stability has always been one of the main problems restricting its application in the food industry. For this reason, a heat-induced aggregate (HIA) of Maillard graft product of isomalto-oligosaccharides (IMO), as well as egg white protein (EWP), was used as hydrophilic emulsifier to improve the stability of W1/O/W2 emulsions. Moreover, gelatin was added into the internal aqueous phase (W1) to construct W1/O/W2 emulsion-gels system. The encapsulation efficiency of HIA-stabilized W1/O/W2 emulsions remained nearly unaltered, dropping by only 0.86%, significantly outperforming the conjugates and physical mixture of IMO and EWP in terms of encapsulation stability. The emulsion-gels system was constructed by adding 5% gelatin in the W1, and had the highest EE% and good salt and heat stability after 30 days of storage. This experiment provides guidance for improving the stability of W1/O/W2 emulsions system and its application in the package delivery of functional substances in the food field.

Multiple Pickering emulsions stabilized by food-grade particles as innovative delivery systems for bioactive compounds

The most common carrier for encapsulation of bioactive components is still simple emulsion. Recently, bio-based novel emulsion systems such as multiple emulsions (MEs) and Pickering emulsions (PEs) have been introduced as innovative colloidal delivery systems for encapsulation and controlled release of bioactive compounds. Multiple PEs (MPEs), which carries both benefit of MEs and PEs could be fabricated by relatively scalable and simple operations. In comparison with costly synthetic surfactants and inorganic particles which are widely used for stabilization of both MEs and PEs, MPEs stabilized by food-grade particles, while having health-promoting aspects, are able to host the "clean label" and "green label" attributes. Nevertheless, in achieving qualified techno-functional attributes and encapsulation properties, the selection of suitable materials is a crucial step in the construction of such complex systems. Current review takes a cue from both MEs and PEs emulsification techniques to grant a robust background for designing various MPEs. Herein, various fabrication methods of MEs and PEs are described comprehensively in a physical viewpoint in order to find key conception of successful formulation of MPEs. This review also highlights the link between the underlying aspects and exemplified specimens of evidence which grant insights into the rational design of MPEs through food-based ingredients to introduces MPEs as novel colloidal/functional materials. Their utilization for encapsulation of bioactive compounds is discussed as well. In the last part, instability behavior of MPEs under various conditions will be discussed. In sum, this review aims to gain researchers who work with food-based components, basics of innovative design of MPEs.

Water in water emulsion stabilized by liposomes developed from whey protein isolate and xanthan gum: Environmental stability and photoprotection effect for riboflavin

The purpose of this work is to explore the feasibility of water in water (W/W) emulsion stabilized with liposomes as a water-soluble nutraceutical carrier. A W/W emulsion system composed of xanthan gum (XG) and whey protein isolate (WPI) with different amount (0.2 %, 0.4 %, and 0.6 %) of liposomes as stabilizer was constructed. Fast green staining observation showed that XG was the internal phase and WPI was the continuous phase respectively. Confocal laser scanning microscopy revealed that with the increase of liposomes concentration from 0.4 % to 0.6 %, the interface thickness of the W/W emulsions was approximately twice that of the 0.2 % liposome-stabilized emulsion.The emulsions remained stable under neutral and weakly alkaline conditions. The droplet sizes of the emulsions were little affected by ionic strength. The binding constant (Ka) for XG to riboflavin (12.22) was approximately 5 times that for WPI to riboflavin (2.46), suggesting that riboflavin had a stronger binding affinity for the XG molecule compared to WPI. The fluorescence spectra of riboflavin showed that 0.4 % and 0.6 % liposome stabilized emulsions could effectively retard the photodegradation of riboflavin under ultraviolet irradiation. The successful construction of liposomes stabilized W/W emulsion provides a novel strategy for delivering water-soluble bioactive substances.

Redesign of air/oil-water interface via physical fields coupled with pH shifting to improve the emulsification, foaming, and digestion properties of plant proteins

The application of plant proteins in food systems is largely hindered by their poor foaming or emulsifying properties and low digestibility compared with animal proteins, especially due to the aggregate state with tightly folded structure, slowly adsorbing at the interfaces, generating films with lower mechanical properties, and exposing less cutting sites. Physical fields and pH shifting have certain synergistic effects to efficiently tune the structure and redesign the interfacial layer of plant proteins, further enhancing their foaming or emulsifying properties. The improvement mechanisms mainly include: i) Aggregated plant proteins are depolymerized to form small protein particles and flexible structure is more easily exposed by combination treatment; ii) Particles with appropriate surface properties are quickly adsorbed to the interfacial layer, and then unfolded and rearranged to generate a tightly packed stiff interfacial layer to enhance bubble and emulsion stability; and iii) The unfolding and rearrangement of protein structure at the interface may result in the exposure of more cutting sites of digestive enzymes. This review summarizes the latest research progress on the structural changes, interfacial behaviors, and digestion properties of plant proteins under combined treatment, and elucidates the future development of these modification technologies for plant proteins in the food industry.

Co-encapsulation of collagen peptide and astaxanthin in WG/OG/W double emulsions-filled alginate hydrogel beads: Fabrication, characterization and digestion behaviors

The double emulsions-filled hydrogel beads delivery systems with controlled lipolysis and sustained-release property of co-encapsulated bioactive substances will be highly desired. Herein, the water-in-oil-in-water emulsion with gelled inner water phase and oil phase (WG/OG/W) filled hydrogel beads as a novel co-delivery system were developed with varied concentrations of rice bran wax and W/O emulsions to achieve effectively controlled release of lipolysis and nutraceuticals. Interestingly, the gelation of oil phase triggered by rice bran wax could enhance the storage stability of WG/OG/W emulsions due to the enhanced viscoelastic property. Increasing the mass fractions of W/O emulsions improved the stability of double emulsions due to increased viscosity and decreased particle size. Cryo-SEM observation showed that the double emulsion droplets were scattered in the three-dimensional network of alginate gel beads. Increased the addition of rice bran wax or W/O emulsions, the encapsulation efficiency of collagen peptide and astaxanthin was significantly improved. The in vitro digestion results indicated that increasing the concentrations of rice bran wax and W/O emulsion fractions in WG/OG/W emulsion-filled gel beads could effectively delay the release extent of free fatty acids and encapsulated nutraceuticals. The presence of rice bran wax contributed to increase the bioaccessibility of collagen peptide and astaxanthin.

The Emulsifying Properties, In Vitro Digestion Characteristics and Storage Stability of High-Pressure-Homogenization-Modified Dual-Protein-Based Emulsions

The droplet size, zeta potential, interface protein adsorption rate, physical stability and microrheological properties of high-pressure-homogenization (HPH)-modified, dual-protein-based whey-soy (whey protein isolate-soy protein isolate) emulsions containing different oil phase concentrations (5%, 10% and 15%; w/w) were compared in this paper. The in vitro digestion characteristics and storage stability of the dual-protein emulsions before and after HPH treatment were also explored. The results show that with an increase in the oil phase concentration, the droplet size and interface protein adsorption rate of the untreated dual-protein emulsions increased, while the absolute value of the zeta potential decreased. When the oil phase concentration was 10% (w/w), HPH treatment could significantly reduce the droplet size of the dual-protein emulsion, increase the interface protein adsorption rate, and improve the elasticity of the emulsion. Compared with other oil phase concentrations, the physical stability of the dual-protein emulsion containing a 10% (w/w) oil phase concentration was the best, so the in vitro digestion characteristics and storage stability of the emulsions were studied. Compared with the control group, the droplet size of the HPH-modified dual-protein emulsion was significantly reduced after gastrointestinal digestion, and the in vitro digestibility and release of free amino groups both significantly increased. The storage stability results show that the HPH-modified dual-protein emulsion showed good stability under different storage methods, and the storage stability of the steam-sterilized dual-protein emulsion stored at room temperature was the best. These results provide a theoretical basis for the development of new nutritional and healthy dual-protein liquid products.

Gelled Liquid Crystal Nanocarriers for Improved Antioxidant Activity of Resveratrol

As many natural origin antioxidants, resveratrol is characterized by non-suitable physicochemical properties for its topical application. To allow its benefits to manifest on human skin, resveratrol has been entrapped within liquid crystal nanocarriers (LCNs) made up of glyceryl monooleate, a penetration enhancer, and DSPE-PEG 750. The nanosystems have been more deeply characterized by using dynamic light scattering and Turbiscan Lab® Expert optical analyzer, and they have been tested in vitro on NCTC 2544. The improved antioxidant activity of entrapped resveratrol was evaluated on keratinocyte cells as a function of its concentration. Finally, to really propose the resveratrol-loaded LCNs for topical use, the systems were gelled by using two different gelling agents, poloxamer P407 and carboxymethyl cellulose, to improve the contact time between skin and formulation. The rheological features of obtained gels were evaluated using two important methods (microrheology at rest and dynamic rheology), before testing their safety profile on human healthy volunteers. The obtained results showed the ability of LCNs to improve antioxidant activity of RSV and the gelled LCNs showed good rheological profiles. In conclusion, the results confirmed the potentiality of gelled resveratrol-loaded nanosystems for skin disease, mainly related to their antioxidant effects.

The Effect of High Pressure Homogenization on the Structure of Dual-Protein and Its Emulsion Functional Properties

It has been proven that high-pressure homogenization (HPH) could improve the functional properties of proteins by modifying their structure. This study researched the effect of HPH on the structural and functional properties of whey-soy dual-protein (Soy Protein Isolation-Whey Protein Isolation, SPI-WPI). Different protein solution samples were treated with HPH at 30, 60, 90, 120 and 150 MPa, and the structure changed under different pressures was analyzed by measuring particle size, zeta potential, Fourier infrared spectrum (FTIR), fluorescence spectrum and scanning electron microscope (SEM). The results showed that HPH significantly reduced the particle size of SPI-WPI, changed the secondary and tertiary structures and improved the hydrophobic interaction between molecules. In addition, HPH significantly improved the solubility and emulsification of all proteins, and the improvement effect on SPI-WPI was significantly better than SPI and WPI. It was found that SPI-WPI treated with 60 MPa had the best physicochemical properties. Secondly, we researched the effect of HPH by 60 MPa on the emulsion properties of SPI-WPI. In this study, the SPI-WPI had the lowest surface tension compared to a single protein after HPH treatment. The emulsion droplet size was obviously decreased, and the elastic properties and physical stability of SPI-WPI emulsion were significantly enhanced. In conclusion, this study will provide a theoretical basis for the application of HPH in modifying the structure of dual-protein to improve its development and utilization in liquid specialty food.

Improving the Stability of Water-in-Oil Emulsions with Medium Internal Phase by the Introduction of Gelatin

The water-in-oil (W/O) emulsion with a medium aqueous phase may be limited in food and cosmetics due to its poor stability and high cost. Herein, this work proposed a facile strategy to improve the W/O emulsion stability by introducing gelatin. The influence of different gelatin concentrations (0, 0.5%, 1.0%, 2.0%, and 4.0%) on the stability and properties of W/O emulsions was mainly investigated. Results showed that the obtained emulsions still belonged to W/O emulsions after adding gelatin to the aqueous phase. As the gelatin concentration increased (0~4.0%), the interfacial tension decreased, which is conducive to promoting the interface adsorption of polyglycerol polyricinoleate (PGPR). Furthermore, introducing gelatin also improved the water-holding capacity (WHC) (33.50~6.32%) and viscosity of W/O emulsions and reduced the droplet size (37.47~8.75 μm) of emulsions. The enhanced interfacial adsorption and aqueous gelation induced by gelatin addition promoted the formation of a tight overall emulsion network structure by the interaction between the interfacial adsorbed PGPR, as well as PGPR and gelatin in the aqueous phase. The enhancement of the overall network effectively improved the storage stability (35 d), thermal stability (20 min, 80 °C), and freeze-thaw stability (10 cycles) of emulsions, especially at 4.0% gelatin concentration. Hence, this study can provide guidance for the improvement and regulation of the stabilities of W/O emulsions.

Formation, digestion properties, and physicochemical stability of the rice bran oil body carrier system

Rice bran is a major by-product of rice processing with abundant nutrient content. Oil bodies (OBs), which are fat particles with unique physicochemical stability, are specialized organelles for the storage of oils and fats in plant tissues. In this study, we extracted OBs from rice bran, to evaluate the function of hydrophobic nutrients efficiently delivered by OBs. The carrier system was prepared by sonicating curcumin with medium chain triglycerides (MCT) into rice bran oil bodies (RBOBs). Emulsions comprising different RBOB mass fractions were characterized. The results showed that the highest encapsulation efficiency (EE, 87.67%), optimal particle size (190 nm), and best storage stability were achieved with the 1.5 wt% RBOBs. Based on activity evaluation data, the carrier system can achieve sustained oil release in the intestine and shows high bioaccessibility (61.04%; IC50 in Caco-2 cells was 77.21 μg/mL), which is important for promoting grain by-product utilization.

Fabrication porous adsorbents templated from aqueous foams using astragalus membranaceus and attapulgite as stabilizer for efficient removal of cationic dyes

The water-based foam stabilized by the natural surfactant applied in the fabrication of porous materials has attracted extensive attention, as the advantages of cleanness, convenience and low cost. Particularly, the development of a green preparation method has became the main research focus and frontier. In this work, a green liquid foam with high stability was prepared by synergistic stabilization of natural plant astragalus membranaceus (AMS) and attapulgite (APT), and then a novel porous material with sufficient hierarchical pore structure was templated from the foam via a simple free radical polymerization of acrylamide (AM). The characterization results revealed that the amphiphilic molecules from AMS adsorbed onto the water-air interface and formed a protective shell to prevent the bubble breakup, and APT gathered in the plateau border and formed a three-dimensional network structure, which greatly slowed down the drainage rate. The porous material polyacrylamide/astragalus membranaceus/attapulgite (PAM/AMS/APT) showed the excellent adsorption performance for cationic dyes of Methyl Violet (MV) and Methylene Blue (MB) in water, and the maximum adsorption capacity could reach to 709.13 and 703.30 mg/g, respectively. Furthermore, the polymer material enabled to regenerate and cycle via a convenient calcination process, and the adsorption capacity was still higher than 200 mg/g after five cycles. In short, this research provided a new idea for the green preparation of porous materials and the treatment of water pollution.

Analysis of Stability, Rheological and Structural Properties of Oleogels Obtained from Peanut Oil Structured with Yellow Beeswax

The aim of this study was to evaluate the macro- and microscopic properties of oleogels with yellow beeswax using different methods, especially modern optical techniques. Microrheological properties, physical stability and morphology of oleogel crystals obtained by structuring of peanut oil with yellow beeswax was analyzed. It was observed that oleogels, even with the smallest concentration of beeswax (2%), were resistant to centrifugal force. Increase in yellow beeswax concentration (from 2, 4, 6 to 8 %) resulted in significant differences in the characteristics of oleogels: increased elasticity (EI), macroscopic viscosity (MVI) and the firmness values of oleogels. It was concluded that non-invasive optical techniques (multi-speckle diffusing wave spectroscopy—Rheolaser Master) are useful in obtaining a quick evaluation of physical properties of oleogels at the microstructural level, and the received information allows for quality assessment.

Rheological properties and critical concentrations of a hyperbranched polysaccharide from Lignosus rhinocerotis sclerotia

The application of polysaccharides in the food industry mainly depends on their rheological properties and the polysaccharides in different concentration regions exhibit different rheological properties due to the interactions between polymer chains. Hence, this work investigated the concentration-dependent rheological behavior of Lignosus rhinocerotis polysaccharide (LRP) in water and determined the critical concentrations. The intrinsic viscosity of LRP was 378 ± 32 mL/g and the LRP exhibited more apparent shear-thinning behavior with increasing concentration. The LRP critical overlap and aggregation concentration in water was ~2.5 mg/mL, implicating the formation of hydrophobic regions may result from the aggregation and overlap between hyperbranched LRP molecules. The LRP/water system showed higher storage modulus than loss modulus with slight frequency dependence at the concentration of 15 mg/mL, exhibiting the structured liquid behavior. When the concentration increased from 10 mg/mL to 30 mg/mL, the compliance recovery percentage value increased from 58.51% to 92.30%, indicating the formation of a strong gel network in the LRP/water system. Furthermore, the micro-rheological test revealed that the LRP/water system exhibited a concentration-dependent increase in elasticity and viscosity and deterioration in fluidity.

Stability and release mechanisms of double emulsions loaded with bioactive compounds; a critical review

Double emulsions (DEs), known as emulsions of emulsions, are dispersion systems in which the droplets of one dispersed liquid are further dispersed in another liquid, producing double-layered liquid droplets. These systems are widely used in the food and pharmaceutical industries due to their ability to co-encapsulate both hydrophilic and hydrophobic bioactive compounds. However, they are sensitive and unstable and their controlled release is challenging. In this study, first, the stability of DEs and their release mechanisms are reviewed. Then, the factors affecting their stability, and the release of bioactive compounds are studied. Finally, modeling of the release in DEs is discussed. This information can be useful to optimize the formulation of DEs in order to utilize them in different industries.

A hierarchical emulsion system stabilized by soyasaponin emulsion droplets

Oil/water (O/W) emulsion droplets coated with soyasaponin (Ssa) were used as emulsifiers to prepare emulsions with hierarchical configurations (2.82 μm). Ssa is a natural triterpenoid with amphiphilic properties and an excellent emulsifying activity. Stable O/W emulsions were prepared and characterized using an ultrasonic method at a Ssa concentration of 2.5 wt%. The resultant hierarchical emulsions were further prepared using O/W droplets as emulsifiers. It was observed that the stability of the hierarchical emulsions changed with alterations to the ratio of O/W droplets to the oil phase. As the number of droplets increased, the more the surface area of the hierarchical emulsion was covered. Additional observations included a decreased particle size, increased negative charge and viscoelastic behavior, and enhanced emulsion stability. The emulsion was most stable when the O/W droplet addition was 29%. The addition of O/W droplets continued to increase, and there was an imbalance in the ratio of O/W droplets to the oil phase; the excess O/W droplets induced instability in the emulsion, resulting in a degradation of the emulsion quality. We monitored hierarchical emulsions with different concentrations of emulsifiers for 30 days, and the results indicated that hierarchical emulsions could meet the demand for long-term storage. This provides a new theoretical basis for the construction and application of complex emulsion systems.

Recent advances on food-grade water-in-oil emulsions: Instability mechanism, fabrication, characterization, application, and research trends

Owing to their promising application prospects, water-in-oil (W/O) emulsions have aroused continuous attention in recent years. However, long-term stability of W/O emulsions remains a particularly challenging problem in colloid science. With the increasing demand of consumers for natural, green, and healthy foods, the heavy reliance on chemically synthesized surfactants to achieve long-term stability has become the key technical defect restricting the application of W/O emulsions in food. To design and manufacture W/O emulsions with long-term stability and clean label, a comprehensive understanding of the fundamentals of the W/O emulsion system is required. This review aims to demystify the field of W/O emulsions and update its current research progress. We first provide a summary on the essential basic knowledge regarding the instability mechanisms, including physical and chemical instability in W/O emulsions. Then, the formulation of the W/O emulsion system is introduced, particularly focusing on the use of natural stabilizers. Besides, the characterization and application of W/O emulsions are also discussed. Finally, we propose promising research trends, including (1) developing W/O high internal phase emulsions (HIPEs) as fat mimetic and substitute, (2) promising formulation routine for long-term stable double emulsions, and (3) searching for novel plant-derived stabilizers of W/O emulsions.

Effect of Oat β-Glucan on the Rheological Characteristics and Microstructure of Set-Type Yogurt

The oat β-glucan (OG) was added into set-type yogurt as a functional ingredient, in order to evaluate effects on the rheological characteristics and microstructure of set-type yogurt. When the OG concentration increased from 0 to 0.3%, the WHC gradually increased. At 0.3% OG, the set-type yogurt had the highest WHC of 94.67%. Additionally, the WHC continuously decreased, reaching the lowest WHC (about 80%) at 0.5% OG. When 0.3% OG was added, the highest score of sensory evaluation was about 85. The rheological result showed that the fermentation process went through the changes as follows: solid → liquid → solid → liquid. The addition of 0.3% OG decreased the fermentation time of set-type yogurt by about 16 min, making yogurt more inclined to be liquid. The acidity of set-type yogurt with OG was slightly higher. The result of microstructure showed that the addition of OG destroyed the three-dimensional network structure of yogurt, and some spherical aggregate particles could be clearly observed at 0.3% OG. Overall, this study provided a theoretical basis for the application of OG in set-type yogurt.

Fabrication and characterization of Pickering emulsion gels stabilized by zein/pullulan complex colloidal particles

BACKGROUND

Zein particles are unsuitable as stabilizers of Pickering emulsions because of their high hydrophobicity. However, few studies have reported on the use of a strong hydrophilic neutral polysaccharide to regulate its wettability. In this work, zein/pullulan complex particles (ZPPs) were formulated by an anti-solvent method to fabricate Pickering emulsions.

RESULTS

The presence of pullulan increased the size, decreased the zeta, and provided excellent resistance to the gravitational separation of zein. Scanning electron microscopy (SEM) revealed that the shape of zein particles changed from spherical as they became aggregated ZPP nanoparticles. Fourier transform infrared (FTIR) spectroscopy indicated that the flocculation phenomenon of ZPPs was related to the hydrogen bond between zein and pullulan. Moreover, the hydrophobicity of zein was modified by hydrophilic pullulan to endow the ZPPs with nearly neutral wettability when the mass ratio was 15:1, allowing for the preparation of stable Pickering emulsions. In contrast to zein, the ZPPs contributed to building a compact interface layer around the droplets and smaller emulsion droplets. Under a certain ZPP concentration, the size and viscosity of emulsion increased with an increase in the oil volume fraction, indicating that the Pickering emulsions stabilized by ZPPs showed better stability against coalescence. Confocal laser scanning microscopy (CLSM) revealed that the ZPPs constructed a dense filling layer on the surface of oil droplets, thus further emphasizing that ZPPs can potentially be used in fabricating Pickering emulsion gels.

CONCLUSION

Zein/pullulan complex particles are an excellent Pickering emulsion gel stabilizer that can be used in the delivery system of bioactive substances in food formulations. © 2020 Society of Chemical Industry.

Development of a gel-in-oil emulsion as a transdermal drug delivery system for successful delivery of growth factors

Growth factors (GFs) are indispensable in regenerative medicine because of their high effectiveness. However, as GFs degenerate easily, the development of a suitable carrier with improved stability for GFs is necessary. In this study, we developed a gel-in-oil (G/O) emulsion technology for the transdermal delivery of growth factors. Nanogel particles prepared with heparin-immobilized gelatin that can bind growth factors were dispersed in isopropyl myristate. The particle size of the G/O emulsion could be controlled by changing the surfactant concentration, volume ratio of the water phase to the oil phase, and gelatin concentration. In vitro skin penetration studies showed better penetration through the stratum corneum of fluorescent proteins containing G/O emulsions than of the aqueous solution of GF. Similarly, an in vivo study showed an angiogenesis-inducing effect after transdermal application of GF-immobilized G/O emulsion. Angiogenesis in mice was confirmed owing to both an increased blood vessel network and higher hemoglobin content in the blood. Therefore, the G/O emulsion could be a promising carrier for GFs with better stability and can effectively deliver GFs at the target site.

Methyl-grafted silica nanoparticle stabilized water-in-oil Pickering emulsions with low-temperature stability

HYPOTHESIS

The viscosity of water-in-oil Pickering emulsions may dramatically increase upon cooling. The solvation of the long-chain alkyl groups grafted on the particles stabilizer is the likely cause of the strong dependence of rheological property on temperature. Thus, we hypothesize that silica nanoparticles (NPs) grafted with short-chain alkyl groups can stabilize Pickering emulsions, yielding weakly temperature-dependent rheological property.

EXPERIMENTS

Using alkyl-grafted (methyl, octyl, and octadecyl) silica NPs as emulsifiers, the rheological properties and microstructure of the water-in-oil Pickering, as well as the solvation of the silica NPs, were studied using diffusing-wave spectroscopy microrheology measurements, confocal laser scanning microscopy, and low-field nuclear magnetic resonance measurements.

FINDINGS

The use of methyl- and octadecyl-grafted silica NPs, which have almost identical optimum contact angles, to stabilize emulsions dramatically reduced the effect of cooling on the viscosity. Moreover, the emulsions stabilized by these methyl-grafted silica NPs exhibited nearly constant rheological properties as the temperature decreased from 75 to 5 °C. The nearly constant rheological properties are attributed to the nearly constant solvation in this temperature range. These materials have potential applications in the cosmetics and petroleum industries.

Application of Advanced Emulsion Technology in the Food Industry: A Review and Critical Evaluation

The food industry is one of the major users of emulsion technology, as many food products exist in an emulsified form, including many dressings, sauces, spreads, dips, creams, and beverages. Recently, there has been an interest in improving the healthiness, sustainability, and safety of foods in an attempt to address some of the negative effects associated with the modern food supply, such as rising chronic diseases, environmental damage, and food safety concerns. Advanced emulsion technologies can be used to address many of these concerns. In this review article, recent studies on the development and utilization of these advanced technologies are critically assessed, including nanoemulsions, high internal phase emulsions (HIPEs), Pickering emulsions, multilayer emulsions, solid lipid nanoparticles (SLNs), multiple emulsions, and emulgels. A brief description of each type of emulsion is given, then their formation and properties are described, and finally their potential applications in the food industry are presented. Special emphasis is given to the utilization of these advanced technologies for the delivery of bioactive compounds.

Tea polyphenols encapsulated in W/O/W emulsions with xanthan gum-locust bean gum mixture: Evaluation of their stability and protection

Herein, improvement of the stability of the water-in-oil-in-water (W/O/W) emulsions by addition of xanthan gum (XG)/locust bean gum (LBG) mixture in the inner water phase was aimed. The impact of XG/LBG mixture on the physical stability, microstructure and rheological properties of W/O/W emulsions was investigated. It was found that, compared with the control emulsions, the presence of XG/LBG mixture could improve the stability of W/O/W emulsions against coalescence. The tea polyphenols (TPPs) and XG/LBG mixture were simultaneously included in the internal aqueous phase of the double emulsion and stored at 25 and 40 °C in the dark for 28 d. The results showed that XG/LBG mixture not only had a protective role for TPPs encapsulated in the internal water phase, but also maintained more than 50% of the antioxidant capacity of TPPs.