A simple dispersive solid phase extraction clean-up/concentration method for selective and sensitive quantification of biogenic amines in wines using benzoyl chloride derivatisation

Cellulose acetate @ functionalized UiO-66-COOH as an affordable coating sorbent for the thin-film extraction of biogenic amines followed by HPLC-MS/MS; Application to various cheese and alcohol-free beverages

Biogenic amines are naturally occurring bioactive compounds synthesized by living organisms, playing vital roles in metabolism. High concentrations of these compounds in the human diet can lead to food poisoning. Therefore, it is crucial to measure the biogenic amines content in food samples to guarantee food safety and protect human health. In this study, a thin film dispersive solid phase extraction method combined with high-performance liquid chromatography-tandem mass spectrometry was proposed for the non-derivatization determination of some biogenic amines such as putrescine, cadaverine, histamine, tryptamine, and 2-phenylethylamine in various types of cheese samples and alcohol-free beverages. For this purpose, cellulose acetate functionalized UiO-66 with free COOH deposited on a stainless-steel mesh was effectively applied as an ultra-thin coating sorbent for the extraction and preconcentration of the target analytes. This resulted in an immense surface area containing a low sorbent amount, long lifetime and fast designing that directly extracted the desired analytes from complicated matrices. The developed design can be a reasonable alternative to electrospinning due to low energy consumption, saving time, and being a cost-effective technique. Under optimal conditions, the method provided wide linearity (5.6-1000 ng g-1) with high coefficients of determination, satisfactory extraction recoveries, and low limits of detection (0.7-1.7 ng g-1) and limits of quantification (1.6-5.6 ng g-1) with good precision (relative standard deviation less than 10%). This innovative method is expected to be applicable to the majority of metal-organic frameworks, which accelerates the advancement and utilization of nanomaterials-coated stainless steel.

Automated LA-DBD-TLC-MS device for accurate detection of biogenic amines in fishery products coupled with machine learning algorithms

A novel, compact, and automated laser ablation dielectric barrier discharge thin layer chromatography-mass spectrometry (LA-DBD-TLC-MS) device was developed for the rapid detection of biogenic amines (BAs) in fishery products. This plug-and-play system integrates thermal desorption via diode laser, DBD plasma ionization, and tandem MS detection, with key operational parameters optimized through experimental and computational methods. Utilizing nanoscale carbon black as a matrix, the device achieved a detection limit of 0.230 pg/mm2. It demonstrated comparable efficacy to HPLC-MS/MS in screening six BAs and enabled species discrimination and spoilage assessment in fish with machine learning algorithms (PCA, RF, SVM, MLP), yielding high accuracies. A multi-linear regression model predicted salmon spoilage with a strong correlation (R2 = 0.974). This study confirms the LA-DBD-TLC-MS device as a reliable, precise, and high throughput tool for rapid BA analysis in fishery products, with potential for direct trace analysis of organic compounds in food matrices.

Extraction and analytical approaches for the determination of post-food processing major carcinogens: A comprehensive review towards healthier processed food

Different food processing methods, e.g. fermentation, grilling, frying, etc., to improve food sensory attributes or shelf-stability are typically employed in different cuisines worldwide. These methods may illicit in-situ health-hazardous chemicals via thermal or enzymatic-mediated processes or chemical interactions with food preservatives. This review provides a comparative overview of the occurrence, extraction, and determination of the major food carcinogens such as nitrosamines (NAs), biogenic amines (BAs), heterocyclic aromatic amines (HAAs), polycyclic aromatic hydrocarbons (PAHs), ethyl carbamate (EC), and malondialdehyde (MDA). Their carcinogenicity levels vary from group 1 (carcinogenic to humans) e.g. benzo[a]pyrene, group 2A (probably carcinogenic to humans) e.g. N-nitrosodiethylamine, group 2B (possibly carcinogenic to humans) e.g. chrysene or group 3 (non-classifiable as carcinogenic to humans) e.g. MDA. Chromatography-based methods are the most predominant techniques used for their analysis. LC-MS is widely used for both volatile/non-volatile NAs, HAAs, BAs, and EC, whereas GC-MS is applied more for volatile NAs, PAHs and MDA.

Exploring factors influencing the levels of biogenic amines in wine and microbiological strategies for controlling their occurrence in winemaking

Fermented beverages, including wine, can accumulate high concentrations of biogenic amines (BAs), which can pose potential health risks. BAs are produced by various yeasts and lactic acid bacteria (LAB) during winemaking. LAB are the main contributors to the formation of histamine and tyramine, the most toxic and food safety relevant biogenic amines. Numerous factors, ranging from agricultural and oenological practices to sanitation conditions, can contribute to the formation of BAs in wines. Moreover, organic and biodynamic wines impose limitations on the use of common food additives employed to control the proliferation of native and spoilage microorganisms during vinification and storage. To mitigate histamine production, commercial starter cultures incapable of synthesising histamine have been effectively utilised to reduce wine histamine content. Alternative fermentative microorganisms are currently under investigation to enhance the safety, quality, and typicity of wines, including indigenous LAB, non-Saccharomyces yeasts, and BAs degrading strains. Furthermore, exploration of extracts from BAs-degrading microorganisms and their purified enzymes has been undertaken to reduce BAs levels in wines. This review highlights microbial contributors to BAs in wines, factors affecting their growth and BA production, and alternative microorganisms that can degrade or avoid BAs. The aim is to lessen reliance on additives, providing consumers with safer wine choices.

Chromatographic Methods and Sample Pretreatment Techniques for Aldehydes, Biogenic Amine, and Carboxylic Acids in Food Samples

This review paper critically examines the current state of research concerning the analysis and derivatization of aldehyde, aromatic hydrocarbons and carboxylic acids components in foods and drinks samples, with a specific focus on the application of Chromatographic techniques. These diverse components, as vital contributors to the sensory attributes of food, necessitate accurate and sensitive analytical methods for their identification and quantification, which is crucial for ensuring food safety and compliance with regulatory standards. In this paper, High-Performance Liquid Chromatography (HPLC) and Gas Chromatographic (GC) methods for the separation, identification, and quantification of aldehydes in complex food matrices were reviewed. In addition, the review explores derivatization strategies employed to enhance the detectability and stability of aldehydes during chromatographic analysis. Derivatization methods, when applied judiciously, improve separation efficiency and increase detection sensitivity, thereby ensuring a more accurate and reliable quantification of aldehyde aromatic hydrocarbons and carboxylic acids species in food samples. Furthermore, methodological aspects encompassing sample preparation, chromatographic separation, and derivatization techniques are discussed. Validation was carried out in term of limit of detections are highlighted as crucial elements in achieving accurate quantification of compounds content. The discussion presented by emphasizing the significance of the combined HPLC and GC chromatography methods, along with derivatization strategies, in advancing the analytical capabilities within the realm of food science.

Ionic liquid-functionalized mesoporous multipod silica for simultaneously effective extraction of aflatoxin B1 and its two precursors from grain

BACKGROUND

Aflatoxin B1 (AFB1) and its precursors contaminate food and agricultural products, posing a significant risk to food safety and human health, but simultaneous and effective extraction and determination of AFB1 and its precursors with varied structures is still a challenging task.

RESULTS

In this study, a bisimidazolium-type ionic liquid functionalized mesoporous multipod silica (SiO2@mPMO-IL(im)2) was fabricated to extract AFB1 and its two precursors, i.e., averantin and sterigmatocystin. The SiO2@mPMO-IL(im)2 could simultaneously extract three targets with varied structures based on the multipods, mesopores, and multifunctional groups. The density functional theory calculations further verified the multiple interactions between SiO2@mPMO-IL(im)2 and targets. The fabricated SiO2@mPMO-IL(im)2 could effectively extract and determine three targets in grains by combing with dispersive solid-phase extraction and high-performance liquid chromatography. Good linearity (r2 > 0.9978), low LODs (0.9-1.5 μg kg-1) and LOQs (3.0-4.5 μg kg-1), satisfactory spiked recoveries (92.5%-106.8%) and high precisions (RSD<6.4%) were observed.

SIGNIFICANCE AND NOVELTY

This work demonstrates the feasibility of SiO2@mPMO-IL(im)2 for simultaneous and effective extraction of toxins with varied structures and provides a promising sample preparation for the analysis of AFB1 and its precursors in grain samples.

Development of a capillary electrophoresis method based on magnetic solid-phase extraction for simultaneous and sensitive detection of eight biogenic amines in foods

BACKGROUND

Biogenic amines (BAs) in high concentrations are toxic and may cause a series of health symptoms. A sensitive measurement of BA levels is essential for human health. Capillary electrophoresis (CE) has emerged for the separation of eight BAs due to simple sample preparation and highly efficient separation. However, an important drawback for CE is low sensitivity. Magnetic solid-phase extraction (MSPE) has become a technique of interest owing to its brief operation and low solvent consumption. Hence, MSPE as a pretreatment has great potential to improve CE sensitivity for the analysis of BAs in complex food.

RESULTS

Results showed that the Pt-Co-MWCNTs-COOH possessed strong magnetism, good reusability, and high adsorptive ability toward eight biogenic amines based on the hydrogen bonding between the -COOH of Pt-Co-MWCNTs-COOH and -NH2 groups of BAs. Using it as an adsorbent, a magnetic solid-phase extraction coupled with capillary electrophoresis (MSPE-CE) method was developed to effectively extract and sensitively analyze eight BAs. Under optimal conditions, the MSPE-CE method has wide linearities (10.0-1000.0 μg L-1 ) and low limits of detection (1.0-6.1 μg L-1 ). The accuracy of the developed method yielded recovery values from 82.07% to 102.58%. Meanwhile, the BAs contents in two samples were analyzed using the MSPE-CE method, with the results consistent with those detected by a high-performance liquid chromatography method.

CONCLUSION

Given those advantages, the established MSPE-CE method promises the practical guidance of monitoring a variety of BAs and provides a foundation for the detection of other food hazards. © 2023 Society of Chemical Industry.

Molecularly imprinted dispersive micro solid-phase extraction and tandem derivatization for the determination of histamine in fermented wines

Histamine causes allergic reactions and can serve as an indicator for assessing food quality. This study designed and developed a dispersive micro solid-phase extraction (D-μSPE) method that combined the advantages of dispersive liquid-liquid extraction and solid-phase extraction (SPE). Molecularly imprinted polymers (MIPs) were employed as the solid phase in the D-μSPE method to extract histamine in wine samples. We used microwave energy to significantly reduce the synthesis time, achieving an 11.1-fold shorter synthesis time compared to the conventional MIP synthetic method. Under optimized D-μSPE conditions, our results showed that the dispersive solvent could effectively increase the adsorption performance of MIPs in wine samples by 97.7%. To improve the sensitivity of histamine detection in gas chromatography-mass spectrometry, we employed the microwave-assisted tandem derivatization method to reuse excess derivatization reagents and reduce energy consumption and reaction time. Calibration curves were constructed for wine samples spiked with 0-400 nmol histamine using the standard addition method, resulting in good linearity with a coefficient of determination of 0.999. The intra- and inter-batch relative standard deviations of the slope and intercept were < 0.7% and < 5.3%, respectively. The limits of quantitation and detection were 0.4 nmol and 0.1 nmol, respectively. The developed method was successfully applied to analyze the histamine concentration in 10 commercial wine samples. In addition, the AGREEprep tool was used to evaluate the greenness performance of the developed method, which obtained a higher score than the other reported methods.

Lignin-based covalent organic polymers with improved crystallinity for non-targeted analysis of chemical hazards in food samples

Lignin, the most abundant source of renewable aromatic compounds derived from natural lignocellulosic biomass, has great potential for various applications as green materials due to its abundant active groups. However, it is still challenging to quickly construct green polymers with a certain crystallinity by utilizing lignin as a building block. Herein, new green lignin-based covalent organic polymers (LIGOPD-COPs) were one-pot fabricated with water as the reaction solvent and natural lignin as the raw material. Furthermore, by using paraformaldehyde as a protector and modulator, the LIGOPD-COPs prepared under optimized conditions displayed better crystallinity than reported lignin-based polymers, demonstrating the feasibility of preparing lignin-based polymers with improved crystallinity. The improved crystallinity confers LIGOPD-COPs with enhanced application performance, which was demonstrated by their excellent performances in sample treatment of non-targeted food safety analysis. Under optimized conditions, phytochromes, the main interfering matrices, were almost completely removed from different phytochromes-rich vegetables by LIGOPD-COPs, accompanied by "full recovery" of 90 chemical hazards. Green, low-cost, and reusable properties, together with improved crystallinity, will accelerate the industrialization and marketization of lignin-based COPs, and promote their applications in many fields.

PEG-modified halloysite as a hydrophilic interaction and cation exchange mixed-mode sorbent for solid-phase extraction of biogenic amines in fish samples

A novel type of PEG-modified halloysite was prepared and used as a hydrophilic interaction and cation exchange mixed-mode sorbent for solid-phase extraction of biogenic amines in fish samples. The eluates were analyzed by high-performance liquid chromatography-ultraviolet detection after the derivatization with benzoyl chloride. The developed sorbent was characterized by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, zeta potential analyzer, and thermo-gravimetric analysis. After the optimization of various parameters influencing the extraction efficiency, the PEG-modified halloysite-based SPE method was evaluated. The adsorption capacities of putrescine, spermine, phenethylamine, and histamine were as high as 9.3, 8.5, 5.7, and 5.6 mg g-1, respectively. Satisfactory reproducibility of sorbent preparation was obtained with within-batch and batch-to-batch relative standard deviations (RSDs) lower than 3.9% and 8.6%, respectively. The biogenic amine spiking recoveries in fish samples ranged from 84.3 to 105.5% with good RSDs lower than 7.8%. Intra-day and inter-day precision, expressed as RSDs, were better than 8.8%. The limits of detection of histamine, putrescine, phenethylamine, and spermine were 9.4, 1.9, 0.5, and 0.9 μg L-1, respectively. This work provides a new hydrophilic interaction and cation exchange mixed-mode sorbent and is successfully applied to the extraction of trace biogenic amines from fish samples.

Study the key biogenic amines in luncheon meat by capillary electrophoresis with indirect UV detection

In this work, a simple, accurate and rapid capillary electrophoresis with indirect ultraviolet detection method was developed to simultaneous separate 10 biogenic amines. It was found that β-cyclodextrin and ethylene diamine tetraacetic acid facilitated the separation of tryptamine and tyramine, spermidine and spermine, respectively. The optimized background electrolytes were consisted of 20.0 mmol/L imidazole, 8.0 mmol/L β-cyclodextrin, 0.5 mmol/L ethylene diamine tetraacetic acid and 6.0% methanol (at pH 4.50 adjusted with acetic acid). The total analysis time of this method was less than 11 min with limits of detection in the range of 0.14-1.98 mg/L. The interday relative standard deviation of migration time and peak area were less than 1.36% and 4.44% (n = 6), respectively. To verify the applicability, this method was carried out to analyze biogenic amines in commercial luncheon meat samples. Due to the complex composition of luncheon meat, the real samples were rinsed with deionized water to reduce the influence of matrices. It was found that both storage temperature and protein content of the luncheon meat samples affected the biogenic amines content during storage. The results of this study are instructive for the storage of high-protein meat products. This article is protected by copyright. All rights reserved.

HPLC-potentiometric method for determination of biogenic amines in alcoholic beverages: A reliable approach for food quality control

Determination of ten biogenic amines in alcoholic beverages by HPLC coupled to a potentiometric detector for food quality control is herein presented. Biogenic amines were separated by ion-pair chromatography on a C18 column using a gradient mobile phase of acetic acid, acetonitrile, and butane-sulfonic acid. Detection was accomplished by a miniaturized amine-selective electrode. The method was validated following ICH and Eurachem guidelines. Linear regression models provided R² values from 0.9870 ± 0.0019 to 0.9991 ± 0.0014 for tyramine and cadaverine, respectively. Detection and quantification limits depend on the molecular weight of BAs, ranging from 9.3 to 60.5 and from 31.1 to 202.3 µg L^-1 for methylamine and spermine, respectively. Repeatability and intermediate precision showed RSD values lower than 5.8 and 8.3%, respectively. Accuracy of assays yielded recovery values from 86.4 to 109.9%. The biogenic amines content in red wine, white wine, and beer samples were 7.54, 5.24, and 4.58 mg L^-1, respectively.

Update on Biogenic Amines in Fermented and Non-Fermented Beverages

The formation of biogenic amines in food and beverages is mainly due to the presence of proteins and/or free amino acids that represent the substrates for microbial or natural enzymes with decarboxylation or amination activity. Fermentation occurring in many alcoholic beverages, such as wine, beer, cider, liqueurs, as well as coffee and tea, is one of the main processes affecting their production. Some biogenic amines can also be naturally present in some fruit juices or fruit-based drinks. The dietary intake of such compounds should consider all their potential sources by both foods and drinks, taking in account the health impact on some consumers that represent categories at risk for a deficient metabolic activity or assuming inhibiting drugs. The most important tool to avoid their adverse effects is based on prevention through the selection of lactic acid bacteria with low decarboxylating activity or good manufacturing practices hurdling the favoring conditions on biogenic amines' production.

Molybdenum disulfide-graphene oxide composites as dispersive solid-phase extraction adsorbents for the enrichment of four paraben preservatives in cosmetics

Molybdenum disulfide-graphene oxide composite (MoS₂/GO) was synthesized and used as the adsorbent in dispersive solid-phase extraction. Four paraben preservatives, namely, methylparaben, ethylparaben, propylparaben, and butylparaben, were enriched with MoS₂/GO and determined by ultra-high-performance liquid chromatography. Molybdenum disulfide was intercalated into graphene oxide layers to reduce self-aggregation by using the solvothermal method. The experimental results indicated that the as-prepared MoS₂/GO composite exhibited great enrichment capability toward those four paraben preservatives, and the adsorption time was 10 min and the elution time was as short as 1 min. The mechanism of MoS₂/GO composite and parabens is attributed to hydrogen bonding and electrostatic attraction. The relative standard deviation (RSD, n = 9) of this method was below 7.6%. Limits of detection and limits of quantification were in the range 0.4-2.3 ng/mL and 1.4-7.6 ng/mL, respectively. The recoveries obtained from the parabens of cosmetic sample were in the range 91.3-124% with RSDs below 10%. The developed method has great potential for the determination of emerging contaminants with low cost and high sensitivity.

Packing a punch: understanding how flavours are produced in lager fermentations

Beer is one of the most popular beverages in the world and it has an irreplaceable place in culture. Although invented later than ale, lager beers dominate the current market. Many factors relating to the appearance (colour, clarity and foam stability) and sensory characters (flavour, taste and aroma) of beer, and other psychological determinants affect consumers' perception of the product and defines its drinkability. This review takes a wholistic approach to scrutinise flavour generation in the brewing process, focusing particularly on the contribution of the raw ingredients and the yeasts to the final flavour profiles of lager beers. In addition, we examine current developments to improve lager beer flavour profiles for the modern consumers.

Development of a method for the determination of polyamines including N-acetylated forms in human saliva via benzoylation and gas chromatography-mass spectrometry

A simple method for the determination of polyamines and their N-acetylated forms was developed using benzoyl chloride as derivatization reagent, and 1,6-diaminohexane as internal standard, followed by liquid-liquid extraction with ethyl acetate. The organic extract was injected in a gas chromatograph using a programmed temperature vaporizer and the determination and quantification was performed with a quadrupole mass spectrometer. There was no matrix effect with the proposed method, so internal calibration was used to quantify the corresponding derivatives. Good linear responses were obtained in the range from the limits of detection to 500 µg L^-1 (50 µg L^-1 for spermidine), with correlation coefficients varying from 0.9591 to 0.9968. The limits of quantification (S/N = 10) ranged 1.0 - 8.3 µg L^-1. Recoveries were found between 82 - 117%, showing the good accuracy of the proposed method. Intra- and inter-day precision assays, expressed as relative standard deviation (RSD) were evaluated at two different concentration levels (low and high), showing values in the range of 2.4 - 6.1% and 5.2 - 9.0% for repeatability and reproducibility, respectively (6.9 - 9.7% and 14.1 - 14.6% for spermidine). Successful determination of the studied polyamines and their N-acetylated forms was performed on the saliva of 17 volunteers.

Ultrasound-assisted dispersive solid-phase extraction combined with reversed-phase high-performance liquid chromatography-photodiode array detection for the determination of nine biogenic amines in canned seafood

This work describes an ultrasound-assisted dispersive solid-phase extraction method combined with reversed-phase high-performance liquid chromatography-photodiode array detection (UADSPE-RPLC-PDA) for the determination of nine common biogenic amines (BAs) in canned seafood. The pretreatment extraction solvent, ultrasonic treatment duration, and derivatization conditions were optimized. The method was validated on the basis of the limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy and successfully applied to analyze four canned fish, two canned shrimp and four canned shellfish samples. LODs of 0.08-0.25 mg kg^-1 were achieved, and the correlation coefficient of determination was 0.9994-0.9997. The method had high precision and accuracy, with relative standard deviations (RSDs) and recoveries of 0.44 to 6.83% and 72.57 to 99.74%, respectively, suggesting the effectiveness of ultrasound-assisted extraction at increasing the solubility of the target analytes in the solvent system and the feasibility of UADSPE-RPLC-PDA for determining trace BAs in canned seafood.

Adsorption of Anthocyanins by Cation and Anion Exchange Resins with Aromatic and Aliphatic Polymer Matrices

This study examines the mechanisms of adsorption of anthocyanins from model aqueous solutions at pH values of 3, 6, and 9 by ion-exchange resins making the main component of heterogeneous ion-exchange membranes. This is the first report demonstrating that the pH of the internal solution of a KU-2-8 aromatic cation-exchange resin is 2-3 units lower than the pH of the external bathing anthocyanin-containing solution, and the pH of the internal solution of some anion-exchange resins with an aromatic (AV-17-8, AV-17-2P) or aliphatic (EDE-10P) matrix is 2-4 units higher than the pH of the external solution. This pH shift is caused by the Donnan exclusion of hydroxyl ions (in the KU-2-8 resin) or protons (in the AV-17-8, AV-17-2P, and EDE-10P resins). The most significant pH shift is observed for the EDE-10P resin, which has the highest ion-exchange capacity causing the highest Donnan exclusion. Due to the pH shift, the electric charge of anthocyanin inside an ion-exchange resin differs from its charge in the external solution. At pH 6, the external solution contains uncharged anthocyanin molecules. However, in the AV-17-8 and AV-17-2P resins, the anthocyanins are present as singly charged anions, while in the EDE-10P resin, they are in the form of doubly charged anions. Due to the electrostatic interactions of these anions with the positively charged fixed groups of anion-exchange resins, the adsorption capacities of AV-17-8, AV-17-2P, and EDE-10P were higher than expected. It was established that the electrostatic interactions of anthocyanins with the charged fixed groups increase the adsorption capacity of the aromatic resin by a factor of 1.8-2.5 compared to the adsorption caused by the π-π (stacking) interactions. These results provide new insights into the fouling mechanism of ion-exchange materials by polyphenols; they can help develop strategies for membrane cleaning and for extracting anthocyanins from juices and wine using ion-exchange resins and membranes.

Parallel sample processing using dispersive INtip micro-purification on programmable multichannel pipettes

Automation gives researchers the ability to process and screen orders of magnitude higher numbers of samples than manual experimentation. Current biomacromolecule separation methodologies suffer from necessary manual intervention, making their translation to high-throughput automation difficult. Herein, we present the first characterization of biomacromolecule affinity purification via dispersive solid-phase extraction in a pipette tip (INtip). We use commercially available resin and compare efficiency with batch and spin column methodologies. Moreover, we measure the kinetics of binding and evaluate resin binding capacities. INtip technology is effective on, and scalable for, an automated platform (INTEGRA ASSIST). The results suggest that high-throughput biomolecular workflows will benefit from the integration of INtip separations.