Sensitive aptamer-based fluorescene assay for ochratoxin A based on RNase H signal amplification

A CRISPR/Cas12a-based competitive aptasensor for ochratoxin A detection

The serious contamination of ochratoxin A (OTA) in agricultural products has promoted the development of rapid, sensitive, and selective analytical methods for OTA monitoring. We demonstrated a competitive aptasensor for OTA detection using CRISPR/Cas12a as an effective signal amplifier. OTA competes with complementary DNA of the aptamer on the microplate to bind to the aptamer. Streptavidin bridges the biotinylated aptamer and biotinylated activator to convert the OTA input into Cas12a activation, which cleaves fluorescent DNA reporters. Under optimized experimental conditions, the aptasensor was demonstrated to work well for sensitive detection of OTA, with a linear range from 0.5 nM to 62.5 nM and a detection limit of 0.5 nM. Moreover, our method not only exhibits high selectivity, but also has satisfactory anti-interference ability against complex sample matrices. Taken together, the CRISPR/Cas12a-based competitive aptasensor offers a simple and sensitive platform for OTA detection, and it holds great promise for food security monitoring.

Double detection of mycotoxins based on aptamer induced Fe3O4@TiO2@Ag Core - Shell nanoparticles "turn on" fluorescence resonance energy transfer

Multiple and sensitive mycotoxin detection is an essential early-warning mechanism for safeguarding human health, and preserving the environment. We synthesized a turn-on Fluorescence Resonance Energy Transfer (FRET) aptamer sensor based on the unique fluorescence quenching and substrate recognition characteristics of Ag NTs (energy receptors) and aptamer modified Fe3O4@TiO2 NP (energy donor) to detect multiple toxins using a single diagnostic approach. The addition of aflatoxin B1 (AFB1) and ochratoxin A (OTA) resulted in a change in fluorescence intensity at 510 and 650 nm, which can be employed for simultaneous recognition with detection limits of 0.94 ng·mL-1 (R2 = 0.997) and 0.54 ng·mL-1 (R2 = 0.995). The aptasensors have been successfully applied for the determination of AFB1 and OTA in grain and oil samples with high recovery rates. The approach provides novel possibilities for the development of sensitive and selective aptasensors with potential applications in aptamer-recognized multifunctional biosensing.

Exo I-based cyclic digestion coupled with synergistic enhancement strategy for integrating dual-mode optical aptasensor platform

The improvement of dual-mode techniques was of particular interest to researchers, which might enhance the detection performance and applicability. Here, a dual-mode optical aptasensor (DO-aptasensor) platform based on exonuclease I (Exo I) cyclic digestion and synergistic enhancement strategy had proposed for zearalenone (ZEN). Following the preparation of dumbbell-shaped signal probe, the Exo I-based cyclic digestion amplification performed, and then the synergistic enhancement effect carried out to achieve the Poly-HRP-based colorimetry and FAM-SGI-based fluorescence. The efficient homogeneous system realized through the magnetic separation, while the signal interference further eliminated by the graphene oxide (GO). The LOD values were as low as 0.067 ng mL-1 for colorimetry mode and 0.009 ng mL-1 for fluorescence mode, which reduced 23-fold and 172-fold than ELASA by same ZEN-Apt. This promising platform gave rise to a dual-mode optical readout, improved sensitivity and positively correlated detection. Meanwhile, the DO-aptasensor also exhibited the acceptable specificity, desirable reliability and excellent practicability. This novel avenue of aptasensor platform hold great potential for dual-mode optical monitoring of other targets, which can further expand the application scope of Exo I-based signal amplification and synergistic enhancement effect.

Fast, portable, selective, and ratiometric determination of ochratoxin A (OTA) by a fluorescent supramolecular sensor

Ochratoxin A (OTA), a mycotoxin found in various food items, possesses significant health risks due to its carcinogenic and toxic properties. Thus, detecting OTA is crucial to ensure food safety. Among the reported analytical methods, there has yet to be one that achieves fast, selective, and portable detection of OTA. In this study, we explore a novel supramolecular sensor, DOCE@ALB, utilizing human serum albumin as the host and a flavonoid fluorescent indicator as the guest. On the basis of indicator displacement assay, this sensor boasts an ultra-fast response time of just 5 s, high sensitivity with a limit of detection at 0.39 ppb, exceptional selectivity, and a noticeable ratiometric fluorescence response to OTA. This discernible color change and portability of the sensor make it suitable for on-site OTA detection in real food samples, including flour, beer, and wine, simply using a smartphone. In comparison to previously reported methods, our approach has showcased notable advantages in both response time and portability, addressing a critical need for food safety and regulatory compliance.

Research progress of metal-organic framework nanozymes in bacterial sensing, detection, and treatment

The high efficiency and specificity of enzymes make them play an important role in life activities, but the high cost, low stability and high sensitivity of natural enzymes severely restrict their application. In recent years, nanozymes have become convincing alternatives to natural enzymes, finding utility across diverse domains, including biosensing, antibacterial interventions, cancer treatment, and environmental preservation. Nanozymes are characterized by their remarkable attributes, encompassing high stability, cost-effectiveness and robust catalytic activity. Within the contemporary scientific landscape, metal-organic frameworks (MOFs) have garnered considerable attention, primarily due to their versatile applications, spanning catalysis. Notably, MOFs serve as scaffolds for the development of nanozymes, particularly in the context of bacterial detection and treatment. This paper presents a comprehensive review of recent literature pertaining to MOFs and their pivotal role in bacterial detection and treatment. We explored the limitations and prospects for the development of MOF-based nanozymes as a platform for bacterial detection and therapy, and anticipate their great potential and broader clinical applications in addressing medical challenges.

Capacitive biosensors for label-free and ultrasensitive detection of biomarkers

Capacitive biosensors are label-free capacitors that can detect biomarkers with the outstanding advantages of simplicity, low cost, and ultrahigh sensitivity. A typical capacitive biosensor consists of a bioreceptor and a transducer, where the bioreceptor captures the biomarker to form a bioreceptor/biomarker conjugate and the transducer generates a detectable signal. In general, antibodies, aptamers, or proteins are exploited as the bioreceptor, while various electrodes including carbon electrodes (CEs), gold electrodes (AuEs), or interdigitated electrodes (IDEs) may serve as the transducer. Because the formation of bioreceptor/biomarker conjugates often leads to a change in capacitance, the capacitive signal is then employed for biomarker detection. This review summarizes recent advances in capacitive biosensors for the detection of biomarkers over the last five years. With a focus on the three common types of bioreceptors, i.e., antibodies, aptamers, and proteins, capacitive biosensors using CEs, AuEs, and IDEs as the transducers are discussed in detail. The immobilization of bioreceptors and signal amplification strategies are described to provide a robust overview of capacitive biosensors for biomarker detection. In addition, analytical methods and future prospects are given to support the application of capacitive biosensors.

Simultaneous detection of patulin and ochratoxin A based on enhanced dual-color AuNCs modified aptamers in apple juice

Patulin (PAT) and ochratoxin A (OTA) are the two main mycotoxins present in apples. Herein, a sensitive aptasensor for simultaneous detection of PAT and ochratoxin OTA was developed. Dual-color gold nanoclusters (AuNCs) with enhanced fluorescence properties were synthesized and employed as fluorescence amplifiers. Two separated fluorescence peaks at 650 nm and 530 nm were monitored simultaneously by employing single excitation (405 nm), corresponding to the aptamer probes of Cys@BSA-AuNCs-AptPAT and Arg@ATT-AuNCs-AptOTA, respectively. The fluorescent aptasensor demonstrated satisfying specificity, storage ability and accuracy. Under the optimal experimental conditions, the linear detection range for PAT and OTA was 0.10-50 ng/mL, with the limit of detection of 0.09 ng/mL and 0.06 ng/mL, respectively. Most importantly, practicability of the constructed aptasensor were confirmed by conducting the determination of PAT and OTA in apple juice sample, indicating the great potential of the aptasensor in practical detection applications.

A novel ternary Y-DNA walker amplification strategy designed fluorescence aptasensor based on Au@SiO2@Fe3O4 nanomaterials for ochratoxin A detection

A novel ternary Y-DNA walker amplification strategy designed fluorescence aptasensor based on Au@SiO2@Fe3O4 nanomaterials for ultrasensitive and specific ochratoxin A detection in food samples is presented. Au@SiO2@Fe3O4 nanomaterials provide the loading platform as well as separation and recovery properties for the ternary Y-DNA walker. The ternary Y-DNA walker is designed to be driven by Nb.BbvCI cleaving a large number of FAM probes to achieve signal amplification. Since Ochratoxin A (OTA) can bind to the constituent aptamer in the ternary Y-DNA walker, adding OTA will destroy the structure of the ternary Y-DNA walker, thereby inhibiting the driving process of the walker. After optimization of various parameters, a standard curve was obtained from 100 to 0.05 ng·mL-1 of OTA with the limit of determination of 0.027 ng·mL-1. The spiked recovery of peanut samples by this method was 82.00-93.30%, and the aptasensor showed excellent specificity and long-term stability. This simple, robust, and scalable oligonucleotide chain-based ternary Y-DNA walker can provide a general signal amplification strategy for trace analysis.

Recent advances in cascade isothermal amplification techniques for ultra-sensitive nucleic acid detection

Nucleic acid amplification techniques have always been one of the hot spots of research, especially in the outbreak of COVID-19. From the initial polymerase chain reaction (PCR) to the current popular isothermal amplification, each new amplification techniques provides new ideas and methods for nucleic acid detection. However, limited by thermostable DNA polymerase and expensive thermal cycler, PCR is difficult to achieve point of care testing (POCT). Although isothermal amplification techniques overcome the defects of temperature control, single isothermal amplification is also limited by false positives, nucleic acid sequence compatibility, and signal amplification capability to some extent. Fortunately, efforts to integrating different enzymes or amplification techniques that enable to achieve intercatalyst communication and cascaded biotransformations may overcome the corner of single isothermal amplification. In this review, we systematically summarized the design fundamentals, signal generation, evolution, and application of cascade amplification. More importantly, the challenges and trends of cascade amplification were discussed in depth.

Molecular Docking Insight into the Label-Free Fluorescence Aptasensor for Ochratoxin A Detection

Ochratoxin A (OTA) is the most common mycotoxin and can be found in wheat, corn and other grain products. As OTA pollution in these grain products is gaining prominence as a global issue, the demand to develop OTA detection technology has attracted increasing attention. Recently, a variety of label-free fluorescence biosensors based on aptamer have been established. However, the binding mechanisms of some aptasensors are still unclear. Herein, a label-free fluorescent aptasensor employing Thioflavin T (ThT) as donor for OTA detection was constructed based on the G-quadruplex aptamer of the OTA aptamer itself. The key binding region of aptamer was revealed by using molecular docking technology. In the absence of the OTA target, ThT fluorescent dye binds with the OTA aptamer to form an aptamer/ThT complex, and results in the fluorescence intensity being obviously enhanced. In the presence of OTA, the OTA aptamer binds to OTA because of its high affinity and specificity to form an aptamer/OTA complex, and the ThT fluorescent dye is released from the OTA aptamer into the solution. Therefore, the fluorescence intensity is significantly decreased. Molecular docking results revealed that OTA is binding to the pocket-like structure and surrounded by the A29-T3 base pair and C4, T30, G6 and G7 of the aptamer. Meanwhile, this aptasensor shows good selectivity, sensitivity and an excellent recovery rate of the wheat flour spiked experiment.

A Novel Fluorescent Aptasensor Based on Dual-labeled DNA Nanostructure for Simultaneous Detection of Ochratoxin A and Aflatoxin B1

Based on DNA strand replacement reaction and aptamer-specific recognition, a simple dual-labeled DNA nanostructure is designed for the simultaneous detection of Ochratoxin A (OTA) and aflatoxin B1 (AFB₁). C1 is labeled with Cy3 and Cy5, while C2 and C3 are labeled with BHQ2. The fluorescence intensity of DNA nanostructure composed of C1, C2 and C3 is weak because of fluorescence resonance energy transfer. When OTA Aptamer (OTA-Apt) and AFB1 Aptamer (AFB₁-Apt) are added to the homogeneous system at the same time, C1 can be replaced with the help of toehold strand displacement, resulting in fluorescence enhancement. In the presence of both OTA and AFB₁, the toehold strand displacement reaction is inhibited due to preferential binding between the target and their corresponding aptamers. The limit of detection of OTA was 0.007 ng/mL and that of AFB₁ was 0.03 ng/mL. The recoveries of OTA and AFB₁ were 96%-101% and 97%-101% in the corn sample, and 99%-101% and 92%-106% in the wine sample. Compared with other sensors, the preparation of this aptasensor needs simpler experimental steps and a shorter total-preparing time, confirming the convenient, rapid, and time-saving operation process.

Recent Development in Biomedical Applications of Oligonucleotides with Triplex-Forming Ability

A DNA structure, known as triple-stranded DNA, is made up of three oligonucleotide chains that wind around one another to form a triple helix (TFO). Hoogsteen base pairing describes how triple-stranded DNA may be built at certain conditions by the attachment of the third strand to an RNA, PNA, or DNA, which might all be employed as oligonucleotide chains. In each of these situations, the oligonucleotides can be employed as an anchor, in conjunction with a specific bioactive chemical, or as a messenger that enables switching between transcription and replication through the triplex-forming zone. These data are also considered since various illnesses have been linked to the expansion of triplex-prone sequences. In light of metabolic acidosis and associated symptoms, some consideration is given to the impact of several low-molecular-weight compounds, including pH on triplex production in vivo. The review is focused on the development of biomedical oligonucleotides with triplexes.

Nanozyme-encoded luminescent detection for food safety analysis: An overview of mechanisms and recent applications

With the rapid growth in global food production, delivery, and consumption, reformative food analytical techniques are required to satisfy the monitoring requirements of speed and high sensitivity. Nanozyme-encoded luminescent detections (NLDs) integrating nanozyme-based rapid detections with luminescent output signals have emerged as powerful methods for food safety monitoring, not only because of their preeminent performance in analysis, such as rapid, facile, low background signal, and ultrasensitive, but also due to their strong attractiveness for future sensing research. However, the lack of a full understanding of the fundamentals of NLDs for food safety detection technologies limits their further application. In this review, a systematic overview of the mechanisms of NLDs and their applications in the food industry is summarized, which covers the nanozyme-mimicking types and their luminescent signal generation mechanisms, as well as their applications in monitoring common foodborne contaminants. As demonstrated by previous studies, NLDs are bridging the gap to practical-oriented food analytical technologies and various opportunities to improve their food analytical performance to be considered in the future are proposed.

Nanomaterials and metal-organic frameworks for biosensing applications of mutations of the emerging viruses

The world today lives in a state of terrible fear due to the mutation of the emerging COVID-19. With the continuation of this pandemic, there is an urgent need for fast, accurate testing devices to detect the emerging SARS-CoV-2 pandemic in terms of biosensors and point-of-care testing. Besides, the urgent development in personal defense tools, anti-viral surfaces and wearables, and smartphones open the door for simplifying the self-diagnosis process everywhere. This review introduces a quick COVID-19 overview: definition, transmission, pathophysiology, the identification and diagnosis, mutation and transformation, and the global situation. It also focuses on an overview of the rapidly advanced technologies based on nanomaterials and MOFs for biosensing, diagnosing, and viral control of the SARS-CoV-2 pandemic. Finally, highlight the latest technologies, applications, existing achievements, and preventive diagnostic strategies to control this epidemic and combat the emerging coronavirus. This humble effort aims to provide a helpful survey that can be used to develop a creative solution and to lay down the future vision of diagnosis against COVID-19.

Dual-Enzyme-Based Signal-Amplified Aptasensor for Zearalenone Detection by Using CRISPR-Cas12a and Nt.AlwI

Zearalenone (ZEN) is harmful to animals and human beings, so it is very important to develop a rapid and sensitive method for the detection of ZEN. In this paper, we proposed a novel ZEN-monitoring method using two aptamers as recognition elements and EnGen LbaCas12a and Nt.AlwI nicking endonuclease as signal amplifiers. When ZEN was present, it bound to the aptamer Z0 and, Z1 was released into solution. The solution was then separated and the Nt.AlwI enzyme was added in order to form a nicking-enzyme cycle, thereby producing large amounts of the ssDNA Z3 for 30 min. The Z3 formed a CRISPR-Cas12a-Z3 complex with CRISPR-Cas12a, activated the trans-cleavage ability of Cas12a, cleaved the Quenched Reporter for 20 min, and underwent fluorescence recovery. The aptasensor was able to sensitively detect ZEN in the linear range of 1–1000 pg/mL, with a detection limit as low as 0.213 pg/mL. The detection time lasted for 2 h. Additionally, this detection technology can also be used to monitor other hazards.

A signal-enhancement fluorescent aptasensor based on the stable dual cross DNA nanostructure for simultaneous detection of OTA and AFB1

The simultaneous detection of multiple mycotoxins is of great significance for food safety and human health. Herein, a simple, convenient and accurate fluorescent aptasensor was designed based on the dual cross DNA nanostructure for the simultaneous detection of ochratoxin A (OTA) and aflatoxin B₁ (AFB₁), in which the stable dual cross DNA nanostructure provided an assay platform using the fluorescent dye-labeled aptamers as a sensing element. Owing to the higher affinity of aptamers for their target, the aptamer probes were released from the assay platform in the presence of OTA and AFB₁, resulting in an enhanced fluorescence at 570 nm and 670 nm. This "signal-on" fluorescent aptasensor assay system can effectively avoid background signals and minimize false positive. Furthermore, the designed method can realize the simultaneous detection of OTA and AFB₁ during the whole experiment. The limits of detection (LOD) were as low as 0.0058 ng/mL for OTA, ranging from 0.01 to 50 ng/mL and 0.046 ng/mL for AFB₁, ranging from 0.05 to 100 ng/mL. The proposed fluorescent aptasensor exhibits excellent performance in practical application and provides a novel approach for the simultaneous detection of multiple mycotoxins by simply changing the aptamers. A "signal-on" fluorescent aptasensor assay system based on the stable dual cross DNA nanostructure was successfully developed for simultaneous detection of OTA and AFB₁ with lower detection limits in wider linear ranges.

Aptasensors for mycotoxins in foods: Recent advances and future trends

Mycotoxin contamination in foods has posed serious threat to public health and raised worldwide concern. The development of simple, rapid, facile, and cost-effective methods for mycotoxin detection is of urgent need. Aptamer-based sensors, abbreviated as aptasensors, with excellent recognition capacity to a wide variety of mycotoxins have attracted ever-increasing interest of researchers because of their simple fabrication, rapid response, high sensitivity, low cost, and easy adaptability for in situ measurement. The past few decades have witnessed the rapid advances of aptasensors for mycotoxin detection in foods. Therefore, this review first summarizes the reported aptamer sequences specific for mycotoxins. Then, the recent 5-year advancements in various newly developed aptasensors, which, according to the signal output mode, are divided into electrochemical, optical and photoelectrochemical categories, for mycotoxin detection are comprehensively discussed. A special attention is taken on their strengths and limitations in real-world application. Finally, the current challenges and future perspectives for developing novel highly reliable aptasensors for mycotoxin detection are highlighted, which is expected to provide powerful references for their thorough research and extended applications. Owing to their unique advantages, aptasensors display a fascinating prospect in food field for safety inspection and risk assessment.

Horseradish peroxidase-catalyzed formation of polydopamine for ultra-sensitive magnetic relaxation sensing of aflatoxin B1

Aflatoxin B₁ as one of the most toxic mycotoxins poses a major health risk to humans and animals. Highly sensitive detection methods of aflatoxin B₁ are urgently required because of its low abundance in biological samples. In this work, we developed a magnetic relaxation sensing strategy using enzyme-catalyzed formation of polydopamine for signal amplification. Horseradish peroxidase can catalyze the reaction to generate polydopamine that assembles magnetic nanoparticles for magnetic relaxation sensing with a high signal-to-noise ratio. Combined with the specific antigen-antibody interaction, this magnetic sensor enables fast and ultra-sensitive detection of aflatoxin B₁ by using transverse relaxation time (T₂) as a readout. Under optimized conditions, the linear range of this magnetic sensor for detecting aflatoxin B₁ is from 10 pg/mL to 10 ng/mL, and the limit of detection is 0.35 pg/mL. This sensor has been challenged for the quantitative analysis of aflatoxin B₁ in animal feed samples that is promising for real-world applications.

Aptamer-based lateral flow assay on-site biosensors

The lateral flow assay (LFA) is a widely used paper-based on-site biosensor that can detect target analytes and obtain test results in several minutes. Generally, antibodies are utilized as the biorecognition molecules in the LFA. However, antibodies selected using an in vivo process not only may risk killing the animal hosts and causing errors between different batches but also their range is restricted by the refrigerated conditions used to store them. To avoid these limitations, aptamers screened by an in vitro process have been studied as biorecognition molecules in LFAs. Based on the sandwich or competitive format, the aptamer-based LFA can accomplish on-site detection of target analytes. Since aptamers have a distinctive ability to undergo conformational changes, the adsorption-desorption format has also been exploited to detect target analytes in aptamer-based LFAs. This paper reviews developments in aptamer-based LFAs in the last three years for the detection of target analytes. Three formats of aptamer-based LFAs, i.e., sandwich, competitive, and adsorption-desorption, are described in detail. Based on these formats, signal amplification strategies and multiplexed detection are discussed in order to provide an overview of aptamer-based LFAs for on-site detection of target analytes. In addition, the potential commercialization and future perspectives of aptamer-based LFAs for rapid detection of SARS-CoV-2 are given to support the COVID-19 pandemic.

Application of the Dimeric G-Quadruplex and toehold-mediated strand displacement reaction for fluorescence biosensing of ochratoxin A

Ochratoxin A (OTA) is one of the most toxic mycotoxins that exists in various agro-products and foods. Here, a non-label and enzyme-free fluorescence biosensor for highly specific detection of OTA has been developed by the combination of toehold-mediated strand displacement reaction (TMSD) and G-quadruplex dimer/ThT (G-dimer/ThT). The DNA duplex (aptamer-IP) is composed of the anti-OTA aptamer and a single stranded initiation probe (IP). In the presence of OTA, the attachment of target to aptamer leads to the liberation of the IP, which activates the cycle TMSD amplifications of two hairpin probes (H1 and H2) accompanied by the production of numerous H1-H2 assemblies. This double-stranded H1-H2 structure results in the proximity between the 5'-end overhang tail of H1 and the 3'-end stem of H2 to liberate the pre-blocked G-dimer sequence for lighting up ThT. In addition, the method displayed a stable fluorescence emission in the high-salt media. It was successfully applied to analyze OTA in real food samples. Hence, the constructed fluorescence biosensing platform might provide a new way for OTA and other toxin analysis detection.

Advances in airborne microorganisms detection using biosensors: A critical review

Humanity has been facing the threat of a variety of infectious diseases. Airborne microorganisms can cause airborne infectious diseases, which spread rapidly and extensively, causing huge losses to human society on a global scale. In recent years, the detection technology for airborne microorganisms has developed rapidly; it can be roughly divided into biochemical, immune, and molecular technologies. However, these technologies still have some shortcomings; they are time-consuming and have low sensitivity and poor stability. Most of them need to be used in the ideal environment of a laboratory, which limits their applications. A biosensor is a device that converts biological signals into detectable signals. As an interdisciplinary field, biosensors have successfully introduced a variety of technologies for bio-detection. Given their fast analysis speed, high sensitivity, good portability, strong specificity, and low cost, biosensors have been widely used in environmental monitoring, medical research, food and agricultural safety, military medicine and other fields. In recent years, the performance of biosensors has greatly improved, becoming a promising technology for airborne microorganism detection. This review introduces the detection principle of biosensors from the three aspects of component identification, energy conversion principle, and signal amplification. It also summarizes its research and application in airborne microorganism detection. The new progress and future development trend of the biosensor detection of airborne microorganisms are analyzed.

Development of a novel label-free impedimetric electrochemical sensor based on hydrogel/chitosan for the detection of ochratoxin A

Ochratoxin A (OTA) is one of the most abundant mycotoxins that contaminate various food products. Herein, we propose a novel label-free impedimetric electrochemical sensor consisting of chitosan/dipeptide nanofibrous hydrogel and immobilized DNA probes with OTA aptamer for the detection of OTA. The thin film of chitosan/dipeptide nanofibrous hydrogel was used as sensing interface and carrier for hybridization chain reaction (HCR) of OTA aptamer and DNA2 strand to form DNA concatemer. The concatemer was dissociated to single-stranded DNA (ssDNA) in the presence of target OTA, and the signal amplification was further implemented by introducing RecJ_f exonuclease, which could digest the single-stranded DNA resulting in OTA recycle. Electrochemical impedance spectroscopy (EIS) has been employed to characterize the properties of the fabricated sensor. A linear detection range of 0.1-100 ng mL^-1 was obtained for OTA with a low detection limit of 0.03 ng mL^-1. Furthermore, the developed sensor was demonstrated in white wine to detect OTA, indicating that the proposed impedimetric sensor has a promising potential application in the food industry.

Spectrofluorimetric study of the complexation of ochratoxin A and Cu2+: Towards the hybrid fluorimetric sensor and visual detection of ochratoxin A in wheat flour samples from farm to fork

In this study, the ochratoxin A (OTA) interaction with some metal cations exhibits a quenching effect of the Cu²⁺, Co²⁺, and Ni²⁺ in the OTA intrinsic fluorescence intensity. The property of the OTA fluorescence change in complexation with the Cu²⁺ has been applied in developing a label-free and selective fluorimetric sensor for fast detection of the OTA trace amounts in wheat flour samples. The achieved color difference map (CDM) based on the spectral profile provides the technical support for the rapid visual sensing of OTA in the wheat flour samples. The feasibility of the hybrid fluorimetric sensor and visual OTA detection in wheat flour samples has been confirmed with the high-performance liquid chromatography (HPLC) method as a standard method. The calculated LOD (0.4 ng g^-1) and LOQ (1.2 ng g^-1) values of the proposed method are much lower than the maximum permissible limit of OTA value reported by the European Union (5 ng g^-1).

Ratiometric-enhanced G-Quadruplex Probes for Amplified and Mix-to-Read Detection of Mercury Pollution in Aquatic Products

Mercury, as a global toxic pollutant, is easy to be accumulated in aquatic products and poses a great threat to human health. In this work, we proposed a mix-to-read, label-free, and robust assay for detecting mercury pollution in aquatic products by engineering a ratiometric-enhanced G-quadruplex probe. The transformation from the G-quadruplex to a hairpin-like structure allows us to confer a ratiometric and leveraged response to Hg²⁺, amplifying the signal-to-background ratio for Hg²⁺ detection. Hg²⁺ response was further improved by screening parallel- and antiparallel-, single-, and multiple-stranded G-quadruplex structures. Compared to the common aptamer probes, the ratiometric-enhanced G-quadruplex probe increased the sensitivity for Hg²⁺ detection by 4.7 times. This proposed sensing system allowed a simple and one-tube homogenous detection of Hg²⁺ at room temperature using a single unlabeled DNA sequence. Its application for Hg²⁺ detection in fish and shrimp conferred satisfactory recovery rates ranging from 98.5 to 105.9%. The label-free and mix-to-read assay is promising for the onsite detection of mercury pollution and facilitating food safety of aquatic products.

Amplified Fluorescent Aptasensor for Ochratoxin A Assay Based on Graphene Oxide and RecJf Exonuclease

In this study, we developed an aptamer-based fluorescent sensing platform for the detection of ochratoxin A (OTA) based on RecJ_f exonuclease-assisted signal amplification and interaction between graphene oxide (GO) and the OTA aptamer (OTA-apt). After optimizing the experimental conditions, the present aptamer-based sensing system can exhibit excellent fluorescent response in the OTA assay, with a limit of detection of 0.07 ng/mL. In addition to signal amplification, this strategy is also highly specific for other interfering toxins. Furthermore, this aptasensor can be reliably used for assessing red wine samples spiked with different OTA concentrations (2.4, 6 and 20 ng/mL). The proposed assay plays an important role in the field of food safety and can be transformed for detecting other toxins by replacing the sequence that recognizes the aptamer.

Metal-induced G-quadruplex polymorphism for ratiometric and label-free detection of lead pollution in tea

Lead pollution are critical concerns for food safety and human health. Herein, a ratiometric metal-induced G-quadruplex polymorphism was introduced to construct aptamer probes, enabling label-free and ratiometric detection of lead in tea, thus is promising for on-site detection of lead pollution. The key feature of the aptamer probe is the synergistic utilization of the dual-wavelength fluorescent signal outputs from a G-quadruplex specific dye and a DNA intercalation dye under a single-wavelength excitation, leading to a more stable and reliable recognition of Pb²⁺ than that of analyses based on single fluorescent reporter. The aptamer probe allowed to a mix-and-read, rapid, cost-effective detection of Pb²⁺ with high specificity and accuracy. Pb²⁺ analysis in tap water and tea exhibited good performance with recovery rates of 92.3%-109.0%. The adoption of ratiometric metal-induced G-quadruplex polymorphism would be a compelling design strategy for constructing robust aptasensor, facilitating the translation of aptamer for food safety control.

A competitive fluorescence assay based on free-complementary DNA for ochratoxin A detection

An ultrasensitive, rapid, and specific method for Ochratoxin A (OTA) detection was designed using complementary sequence to aptamer as a target of molecular beacon (MB). The designed loop structure of the MB has the same sequence as the aptamer with a complementary DNA (cDNA) which translates the level of the target into a measurable response. The presence of the target holds aptamer at the corresponding amount and the additional cDNAs are consumed by unbound aptamers which avails free cDNAs that resulting in fluorescence rising due to unfolding of MBs. Under the optimized conditions, the fluorescence intensity increased linearly with OTA concentration over the range of 10 pg mL^-1-1 µg mL^-1 with the detection limit of 0.247 pg mL^-1. The application of this assay in wheat sample in comparison with HPLC-MS/MS method, demonstrated that the new assay could be a potential sensing platform for OTA detection.

Simultaneous detection of aflatoxin B1 and ochratoxin A in food samples by dual DNA tweezers nanomachine

a dual DNA tweezers nanomachine was developed for one-step simultaneous detection of aflatoxin B1 (AFB1) and ochratoxin A (OTA) in food samples. The dual DNA tweezers are locked by the aptamers of mycotoxins, resulting the "turn off" of fluorescent signal. In the presence of AFB1 and OTA, the aptamers can bind with their corresponding targets, resulting the "open" of DNA tweezers and the "turn on" of the fluorescent signals. The limits of detections were 3.5 × 10^-2 ppb for AFB1 and 0.1 ppb for OTA. Moreover, the applicability of the method was further demonstrated by conducting a limited survey on 5 samples collected from various sources. The recoveries of this method change from 90.0% to 110.0% for simultaneous detection of AFB1 or OTA and the RSDs vary from 4.1% to 9.2%. Detection uncertainties were within 5% (with a 95% confidence level).

A nanozyme-linked immunosorbent assay based on metal-organic frameworks (MOFs) for sensitive detection of aflatoxin B1

In order to avoid the occurrence of false positives and false negatives caused by conventional enzyme-linked immunosorbent assay (ELISA), we established a novel indirect competitive MOF-linked immunosorbent assay (MOFLISA) method for the high throughput and high sensitive detection of aflatoxin B₁. This method replaces the natural enzyme with functional MOFs to catalyze a chromogenic system. As a result, the limit of detection (LOD) of the MOFLISA method was 0.009 ng·mL^-1 with a linear working range from 0.01 to 20 ng·mL^-1. The developed MOFLISA method for AFB₁ has a 20-fold improved LOD value compared with the conventional ELISA. The recoveries and relative standard deviations (RSD) ranged from 86.41 to 99.74% and 2.38-9.04%, respectively. The results demonstrate that the recovery rate and accuracy of this detection method is better than that of conventional ELISA, reducing risks offalsepositive andfalsenegativeresults.

Dual Triple Helix-Aptamer Probes for Mix-and-Read Detecting Antibiotics in Fish and Milk

Antibiotic abuse in agricultural products leads to serious food safety issues. To this end, we proposed a mix-and-read and enzyme-free amplified assay for antibiotics based on a dual triple helix-aptamer probe, potentially applicable for on-site monitoring of antibiotic residues. A dual triple helix-aptamer probe can leverage the response toward target molecules without enzyme-based amplification, rendering it sensitive and robust for profiling target molecules. The proposed assay allowed mix-and-read detection of chloramphenicol with a detection limit of 0.18 nM. Besides, it accommodated for specifically resolving chloramphenicol among other antibiotics. Chloramphenicol residual in aquatic products in fish and milk can be precisely determined. Thus, the aptamer probe deems to enrich the toolbox for managing antibiotic use.

Progress on Structured Biosensors for Monitoring Aflatoxin B1 From Biofilms: A Review

Aspergillus exists commonly in many crops and any process of crop growth, harvest, storage, and processing can be polluted by this fungus. Once it forms a biofilm, Aspergillus can produce many toxins, such as aflatoxin B1 (AFB1), ochratoxin, zearalenone, fumonisin, and patulin. Among these toxins, AFB1 possesses the highest toxicity and is labeled as a group I carcinogen in humans and animals. Consequently, the proper control of AFB1 produced from biofilms in food and feed has long been recognized. Moreover, many biosensors have been applied to monitor AFB1 in biofilms in food. Additionally, in recent years, novel molecular recognition elements and transducer elements have been introduced for the detection of AFB1. This review presents an outline of recent progress made in the development of biosensors capable of determining AFB1 in biofilms, such as aptasensors, immunosensors, and molecularly imprinted polymer (MIP) biosensors. In addition, the current feasibility, shortcomings, and future challenges of AFB1 determination and analysis are addressed.

Multicolor colorimetric detection of ochratoxin A via structure-switching aptamer and enzyme-induced metallization of gold nanorods

Colorimetric aptasensors have been intensively studied for the ochratoxin A (OTA) detection, but they mostly exhibit just one-color change, resulting in poor visual resolution and limited use for semi-quantitative analysis. Thus, we designed a high-resolution colorimetric assay on the basis of aptamer structural switching and enzyme-induced metallization of gold nanorods (AuNRs). DNA-alkaline phosphatase (ALP)-immobilized magnetic beads were prepared. The aptamer bounded to OTA to form G-quadruplexes, releasing ALP-labelled complementary DNA (cDNA-ALP). After magnetic separation, cDNA-ALP catalyzed the decomposition of ascorbic acid 2-phosphate to ascorbic acid that reduced Ag⁺, forming an Ag shell on the surface of AuNRs. This caused a blue-shift of the longitudinal local surface plasmon resonance peak of the AuNRs and a naked eye visible multicolor change. Under optimal conditions, the assay exhibited a 9.0 nM detection limit for OTA, with high specificity. This method is promising for the on-site visual semi-quantitative detection of mycotoxins in foods.

A quencher-free 2-aminopurine modified hairpin aptasensor for ultrasensitive detection of Ochratoxin A

A sensitive, efficient and quencher-free fluorescence aptasensor to detect Ochratoxin A (OTA) based on aptamer, 2-aminopurine (2AP) labeled Oligonucleotide sequence, as well as exonuclease I (Exo I) activity was developed. In which the aptamer specific to OTA was modified into a hairpin structure, and 8 bases at the 3' ends are exposed (H); also, 2AP is embedded in the oligonucleotide complementary to the 8 bases (2AP-probe).The detection principle based on 2AP-probe could be bonded to its complementary sequence and quenches the fluorescence of 2AP; The aptamer has a stronger affinity for the target than its complementary sequence; Exo I can dissociate single-stranded DNA and has little effect on double-stranded DNA as well as folded DNA. In the absence of OTA, the fluorescence of 2AP is quenched due to the complementary pairing of H and 2AP-probe; in the presence of OTA, H selective binding target is detached from 2AP-probe, and the fluorescence of 2AP is slightly restored. Moreover, when the Exo I is added to the detection system, 2AP-probe is dissociated by the Exo I to release the free 2AP, and the fluorescence of the system is further enhanced thereby realizing the detection of OTA. The detection limit of the aptasensor was low as 0.03 nM with a linear range of 0.5-100 nM. Moreover, the aptasensor has good selectivity and practicability and also has good potential in realizing the detection of toxic and harmful substances in food complex matrices.

Core-satellite assemblies and exonuclease assisted double amplification strategy for ultrasensitive SERS detection of biotoxin

In this work, core-satellite assemblies and exonuclease assisted double amplification strategy is developed to produce surface-enhanced Raman scattering (SERS) biosensor towards ultrasensitive detection of biotoxin. In the presence of target molecules, the exonuclease III (Exo III) assisted efficient recycling amplification provides an excellent pathway for the fabrication of core-satellite SERS sensor. Briefly, the proposed strategy includes the following double amplifications: (i) Exo III induced target-related signal amplification; (ii) core-satellite assemblies assisted formation of SERS "hot-spots" induced signal amplification. To show the applicability of the suggested strategy, the detection of ochratoxin A (OTA), one of the most toxic and widely distributed biotoxin, is demonstrated as an example. The results show that the limit of detection (LOD) of OTA is 0.83 fg mL^-1 (S/N = 3). On the basis of the DNA aptamer induced specific target recognition, hence our sensing strategy is easy to be expended to the ultrasensitive detection of other targets, e.g., DNAs, RNAs, and other molecules that have corresponding DNA aptamers.

Engineering Multivalence Aptamer Probes for Amplified and Label-Free Detection of Antibiotics in Aquatic Products

Excessive use of antibiotics in aquatic products is a serious problem for food safety and human health, and on-site detection of antibiotics is highly demanded. Herein, we proposed multivalence aptamer probes, allowing sensitive, label-free, and homogeneous detection of antibiotics in different aquatic products. Compared to commonly used aptamers, multivalence aptamer probes can provide multiple binding sites and a higher affinity for target molecules, and the iterative binding on different binding sites contributes to an amplified recognition effect, sharply increasing the response and sensitivity of aptamer probes. The 2-valence aptamer probes conferred a limit of detection of 0.097 nM for kanamycin detection, where it is estimated that their sensitivity is enhanced 12 times compared to 1-valence aptamer probes. Meanwhile, multivalence aptamer probes allowed us to specifically identify kanamycin among other antibiotics. It could detect kanamycin residual in aquatic products including river eel and puffer fish, as well as tap water with high precision. A multivalence design strategy of aptamer probes would significantly improve the detection performance of aptamers, facilitating the translation of aptamer for food safety control.

Graphene/aptamer probes for small molecule detection: from in vitro test to in situ imaging

Small molecules are key targets in molecular biology, environmental issues, medicine and food industry. However, small molecules are challenging to be detected due to the difficulty of their recognition, especially in complex samples, such as in situ in cells or animals. The emergence of graphene/aptamer probes offers an excellent opportunity for small molecule quantification owing to their appealing attributes such as high selectivity, sensitivity, and low cost, as well as the potential for probing small molecules in living cells or animals. This paper (with 130 refs.) will review the application of graphene/aptamer probes for small molecule detection. We present the recent progress in the design and development of graphene/aptamer probes enabling highly specific, sensitive and rapid detection of small molecules. Emphasis is placed on the success in their development and application for monitoring small molecules in living cells and in vivo systems. By discussing the key advances in this field, we wish to inspire more research work of the development of graphene/aptamer probes for both on-site or in situ detection of small molecules and its applications for investigating the functions of small molecules in cells in a dynamic way. Graphical abstract Graphene/aptamer probes can be used to construct different platforms for detecting small molecules with high specificity and sensitivity, both in vitro and in situ in living cells and animals.

Nanobody-alkaline phosphatase fusion-mediated phosphate-triggered fluorescence immunoassay for ochratoxin a detection

Ochratoxin A (OTA) is a kind of mycotoxin that seriously harms the health of humans and animals. In this study, a nanobody-alkaline phosphatase fusion-mediated phosphate-triggered fluorescence immunoassay (Nb-AP-mediated PT-FIA) was developed for detecting OTA. Based on the constructed phosphate-triggered fluorescence sensing system for Nb-AP and the optimal working conditions, the Nb-AP-mediated PT-FIA has a half maximal inhibition concentration (IC₅₀) of 0.46 ng/mL, a limit of detection (IC₁₀) of 0.12 ng/mL, and a linear range (IC_20-80) of 0.2-1.26 ng/mL, respectively. The recovery experiment indicated acceptable accuracy and precision of the Nb-AP-mediated PT-FIA, and the results were validated by high performance liquid chromatography with fluorescence detector. Thus this proposed method is applicable to sensitive, rapid, and low-cost detection of OTA and other toxic analytes with low molecular weight in food and environment.

Ultrasensitive detection of Staphylococcal enterotoxin B in milk based on target-triggered assembly of the flower like nucleic acid nanostructure

A rapid and ultrasensitive method is described for the detection of Staphylococcal enterotoxin B (SEB). It is based on the formation of the flower like nucleic acid nanostructure by integrating (a) target-induced triggering of DNA release with (b) signal amplification by a hybridization chain reaction (HCR). Firstly, partially complementary pairing of aptamer and trigger DNA forms a duplex structure. The capture DNA (cpDNA) is then placed on the surface of gold electrode through gold-thiol chemistry. In the presence of SEB, the aptamer-target conjugate is compelled to form. This causes the release of trigger DNA owing to a strong competition between aptamer and SEB. Then, the trigger DNA is subsequently hybridized with the partial complementary sequences of the cpDNA to trigger HCR with three auxiliary DNA sequences (referred to as MB1, MB2, MB3). Finally, the flower like nucleic acid nanostructures are formed and allow numerous hexaammineruthenium(iii) chloride ([Ru(NH3)6]3+, RuHex) to be absorbed on the DNA by electrostatic interaction, and thus amplify electrochemical signal. Under optimal conditions, the chronocoulometry charge difference increases linearly with the logarithm of the SEB concentrations in the range from 5 pg mL-1 to 100 ng mL-1 with a detection limit as low as 3 pg mL-1 (S/N = 3).