Chemometrics-assisted determination of Sudan dyes using zinc oxide nanoparticle-based electrochemical sensor

Sea Urchin-like Magnetic Microbeads-Based Electrochemical Biosensor for Highly Sensitive Detection of Metabolites

Analyzing metabolite levels in bodily fluids is essential for disease diagnosis and surveillance. Electrochemical biosensors are ideal for monitoring metabolite levels due to their high sensitivity, rapid response, and low cost. The magnetic microbeads-based electrode functionalization method further promotes the automation development of electrochemical biosensors by eliminating the tedious electrode polishing process. In this study, we presented sea urchin-like magnetic microbeads (SMMBs) and constructed an SMMB-based electrochemical biosensor. The specific morphology of SMMBs provides a larger specific surface area and abundant enzyme binding sites, thereby expanding the active reaction interface on the electrode and improving the sensitivity of the biosensor. Experiment results demonstrated that the SMMB-based electrochemical biosensor achieves μM level detection sensitivity for glucose. Furthermore, by replacing the anchored oxidase on SMMBs, the biosensor can be extended to detect other metabolites, such as cholesterol. In summary, the SMMBs provide a new path to handily construct electrochemical biosensors and hold a great potential for metabolite detection and further development.

Comprehensive Investigations About the Binding Interactions of Sudan Dyes with DNA by Spectroscopy and Docking Methods

Sudan dyes are recognized as carcinogens, which are strictly determined whether there are them in food for food safety. Hence, in order to understand the mechanism at the molecular level, this work investigated the binding interactions of Sudan I-IV with calfthy mus DNA. The synchronous fluorescence and UV-vis spectral results suggested the complex formation between Sudan I-IV and ct-DNA. EB and Hoechst 33258 displacement experimental results confirmed the binding sites of Sudan I-IV in ct-DNA and the minor groove-binding mode of Sudan I-IV with ct-DNA. The molecular modeling computational method also proved binding mode, which is consistent with the spectral experiments. In addition, the aromatic rings of Sudan I-IV play important roles in binding with DNA. Compared to Sudan I and II, the increase of molecular conjugation system enhances the binding abilities of Sudan III and Sudan IV with DNA. Vdm + Hbond + desolv energies of them are the main contribution of their combined energies.

Recent advances in electrochemical detection of common azo dyes

PURPOSE

Food forensics is an emerging field and the initial part of this review showcases the toxic effects and the instrumental methods applied for the detection of the most commonly used azo dyes. Electrochemical detection has a lot of advantages and hence the significance of the most important techniques used in the electrochemical detection is discussed. The major part of this review highlights the surface modified electrodes, utilized for the detection of the most important azo dyes to achieve low detection limit (LOD).

METHODS

A thorough literature study was conducted using scopus, science direct and other scientific databases using specific keywords such as toxic azo dyes, electrochemical detection, modified electrodes, LOD etc. The recent references in this field have been included.

RESULTS

From the published literature, it is observed that with the growing interests in the field of electrochemical techniques, a lot of importance have been given in the area of modifying the working electrodes. The results unambiguously show that the modified electrodes outperform bare electrodes and offer a lower LOD value.

CONCLUSION

According to the literature reports it can be concluded that, compared to other detection methods, electrochemical techniques are much dependable and reproducible. The fabrication of the electrode material with the appropriate modifications is the main factor that influences the sensitivity. Electrochemical sensors can be designed to be more sensitive, more reliable, and less expensive. These sensors can be effectively used by toxicologists to detect trace amounts of harmful dyes in food samples.

Electrochemical Sensing Strategies for Synthetic Orange Dyes

This review explores electrochemical sensing strategies for synthetic orange dyes, addressing the growing need for sensitive and selective detection methods in various industries. We examine the fundamental principles underlying the electrochemical detection of these compounds, focusing on their redox behavior and interaction with electrode surfaces. The review covers a range of sensor designs, from unmodified electrodes to advanced nanomaterial-based platforms. Chemically modified electrodes incorporating polymers and molecularly imprinted polymers are discussed for their enhanced selectivity. Particular attention is given to nanomaterial-based sensors, including those utilizing carbon nanotubes, graphene derivatives, and metal nanoparticles, which have demonstrated exceptional sensitivity and wide linear ranges. The potential of biological-based approaches, such as DNA interaction sensors and immunosensors, is also evaluated. Current challenges in the field are addressed, including matrix effects in complex samples and long-term stability issues. Emerging trends are highlighted, including the development of multi-modal sensing platforms and the integration of artificial intelligence for data analysis. The review concludes by discussing the commercial potential of these sensors in food safety, environmental monitoring, and smart packaging applications, emphasizing their importance in ensuring the safe use of synthetic orange dyes across industries.

Long pepper (Piper longum) derived carbon dots as fluorescent sensing probe for sensitive detection of Sudan I

In this piece of work, microwave-assisted conversion of a natural precursor in to high-valued nano-scale material was carried out by a completely greener method. The fluorescent carbon dots prepared, designated as long pepper derived carbon dots (LPCDs), have been thoroughly characterized to explore the physical and chemical properties. The system exhibits excitation dependent emission behavior and from the optimal studies the excitation and emission wavelength of the system was found to be 330 nm and 455 nm respectively. On account of the superior fluorescent behavior of the LPCDs, it was successfully employed as a fluorescent sensing probe to detect Sudan I with good level of selectivity and sensitivity. This carcinogenic dye extensively used as food adulterant can impart several health issues. Food product safety is of high concern, therefore a simple facile and economical analytical method was proposed based on the fluorescence of LPCDs for this dye detection with satisfactory statistical parameters. A linear relationship was maintained in the range of 0 to 27.27 μM Sudan I with limit of detection of 0.92 μM. The quenching mechanism was studied and finally attributed to Förster resonance energy transfer (FRET) mechanism. In addition, the probe was effectively implemented for Sudan I detection in commercial chili powder samples with good level of recovery parameters.

Preparation of SERS active filter paper for filtration and detection of pesticides residue from complex sample

The selectivity is needed mostly in SERS sensing because analytes of interest are commonly present in a complex mixture containing particles and impurities, which hinder the interactions between the laser and analyte being detected. In this manuscript, we describe our efforts developing a simple and instant. method to prepare a filter paper SERS sensor. Colloidal Ag nanoparticles were immobilized on one side of filter paper via an in-situ growth method. The fabrication process of the sensor could be finished in several minutes, and no special facility needed. The filter paper SERS sensor demonstrated a spectra uniformity with a 7.0 % point-by-point signal deviation. And the filter function of the sensor could effectively filter out interferences from samples in 1 min, that allowing the direct detection of thiram in ketchup by SERS with detection limit of 93 ppb. Furthermore, we used a Quick Easy Cheap Effective Rugged and Safe (QuEChERS) sample preparation method to detect malachite green (MG) in soil with a sensitivity as low as 0.01 ppm without any sample pre-treatment or purification. A SERS filter paper may open a new avenue for rapid testing of food quality during manufacturing as well as fast detection of potential contaminants in a myriad of substrates.

Nanomaterial-based sandwich-type electrochemical aptasensor platform for sensitive voltammetric determination of leptin

A sandwich-type electrochemical aptasensor was designed for sensitive detection of leptin in biological samples, including human serum and human plasma. The developed aptasensor was produced by electrodeposition of gold nanoparticles on a screen-printed electrode modified with zinc oxide nanoparticles. The synergy effect of zinc oxide and gold nanoparticles improved the electrocatalytic activity of the aptasensor. The obtained high surface area allowed more aptamer molecules to be loaded on the electrode surface. Signal amplification significantly increases the detection sensitivity of a developed biosensor. Although the use of nanomaterials is the most preferred detection tool for this purpose, as an alternative, enzyme-catalyzed signal amplification is widely used in the construction of a biosensor due to its specificity and high catalytic efficiency. Therefore, both nanomaterial-supported and an alkaline phosphatase-based aptasensor design were developed, which can produce in situ electroactive product by enzymatic hydrolysis of the inactive substrate to achieve a higher signal-to-background ratio. Under optimal conditions, the developed aptasensor exhibited a wide linear concentration range from 0.01 pg mL^-1 to 100.0 pg mL^-1 with a detection limit of 0.0035 pg mL^-1. While the developed aptasensor provided excellent selectivity in the presence of some interfering compounds, it possessed outstanding reproducibility and stability. In addition, the developed aptasensor has been applied with good recoveries in the range 96.31 to 108.79% in human serum and plasma samples. In conclusion, all the obtained results showed the feasibility of the developed aptasensor for practical applications.

Rapid and selective detection of dopamine in human serum using an electrochemical sensor based on zinc oxide nanoparticles, nickel phthalocyanines, and carbon nanotubes

Composite materials have gained significant attention owing to the synergistic effects of their constituent materials, thereby facilitating their utilization in new applications or in improving the existing ones. In this study, a composite based on nickel phthalocyanine (NiTsPc), zinc oxide nanoparticles (ZnONPs), and carbon nanotubes (CNT) was developed and subsequently immobilized on a pyrolytic graphite electrode (PGE). The PGE/NiTsPc-ZnONPs-CNT was identified as a selective catalytic hybrid system for detection of neurotransmitter dopamine (DA). The electrochemical and morphological characterizations were conducted using atomic force microscopy (AFM). Chronoamperometry and differential pulse voltammetry (DPV) were used to detect DA and detection limits of 24 nM and 7.0 nM was found, respectively. In addition, the effects of some possible DA interferents, such as ascorbic acid, uric acid, and serotonin, on DA response were evaluated. Their presence did not show significant variations in the DA electrochemical response. The high specificity and sensitivity of PGE/NiTsPc-ZnONPs-CNT for DA enabled its direct detection in human serum without sample pretreatment as well as in DA-enriched serum samples, whose recovery levels were close to 100%, thereby confirming the effectiveness of the proposed method. In general, PGE/NiTsPc-ZnONPs-CNT is a promising candidate for future applications in clinical diagnosis.

Electrochemical detection of Sudan red series azo dyes: Bibliometrics based analysis

Sudan red azo dyes are banned from food because of their carcinogenic properties. It is necessary to establish a method for the detection of Sudan azo dyes in food. Among them, electrochemical sensing technology has become a very potential analytical method for food detection because of its fast, sensitive and low price. In this paper, we analyze the electrochemical detection of Sudan red azo dyes by bibliometric method. A total of 161 articles were analyzed from 2007 to 2021. The geographical and institutional distribution of these papers is used to understand the form of collaboration on this topic. Keyword analysis in these papers is used to understand the different directions in which the topic is studied at different stages. The results show that the topic reached its peak in 2015. The development of novel materials with excellent electrochemical activity has promoted the research on this topic. As detection limits continue to be lowered and sensors continue to be optimized, this topic currently does not continue to attract much attention.

Multivalent SnO2 quantum dot-decorated Ti3C2 MXene for highly sensitive electrochemical detection of Sudan I in food

A new electrochemical sensor was fabricated by SnO2 quantum dot-decorated Ti3C2 MXene for the highly sensitive detection of Sudan I in food. This sensor with good selectivity, precision and accuracy can be used in monitoring illegal food additives.

Preparation of Polyamidoamine Dendrimer Modified Magnetic Nanoparticles and Its Application for Reliable Measurement of Sudan Red Contaminants in Natural Waters at Parts-Per-Billion Levels

The health threat from Sudan red dyes has been the subject of much attention in recent years and is crucial to design and establish reliable measurement technologies. In the present study, a new magnetic nanomaterial, polyamidoamine dendrimer-modified magnetic nanoparticles (Gn-MNPs), was synthesized and characterized. The nanomaterials had good adsorption capacity for Sudan dyes from natural waters. G1.5-MNPs possessed excellent adsorption capacity and a linear adsorption relationship over the range from 0.02 to 300 μg L⁻¹ of Sudan dyes with relative coefficients all larger than 0.996. The sensitivity of the proposed method was excellent with detection limits over the range from 1.8 to 5.5 ng L⁻¹ and the precision was less than 3.0%. G1.5-MNPs showed a remarkable application potential for the enrichment of trace environment pollutants in aqueous samples and the developed method based on this nanomaterial could be a robust and reliable alternative tool for routine monitoring of such pollutants.

Modification of screen-printed gold electrode with 1,4-dithiothreitol: application to sensitive voltammetric determination of Sudan II

Objectives

The aim of this study is to investigate the electrochemical behavior of Sudan II (SuII) using a screen-printed gold electrode (SPGE) modified with 1,4-dithiothreitol (DTT) and to determine the amount of Sudan II by voltammetry.

Materials and Methods

A DTT-modified screen-printed gold electrode (DTT/SPGE) was fabricated and its application for differential pulse voltammetric (DPV) determination of SuII was reported. Fourier transform infrared spectroscopy (FT-IR), cyclic voltammetry and electrochemical impedance spectroscopy were used for the characterization of the modified electrode. The effects of instrumental and chemical parameters were optimized for the determination of SuII. The fabricated electrode was used for the analysis of SuII in fortified and real samples. High-performance liquid chromatography was preferred as a reference method for the evaluation of the obtained voltammetric results.

Results

The electrochemical studies and FT-IR demonstrated that the SPGE was modified with DTT. The obtained peak current at DTT/SPGE was 6.67 times higher than that recorded with SPGE. At the optimized conditions of DPV in pH = 2.5 of H2SO4, the oxidation peak current of SuII was proportional to its concentration in range: 0.001–1.500 μmol l–1 with a detection limit of 0.0002 μmol l–1 (S/N = 3). For the analysis of SuII, 101.67%–104.33% of recovery percentage was obtained.

Conclusions

A new electrode was successfully improved for the determination of SuII. This highly selective and sensitive electrode supplied the fast determination of SuII in ketchup, chili sauce and salsa dip sauce. In addition, voltammetric and chromatographic results are found to be consistent.

Three-dimensional voltammetry: Use of chronoamperometric E-t-i data to achieve second-order advantage

This work studied the use of three-dimensional voltammetry, particularly potential-time-current (E-t-i) data, on the development of electroanalytical methods. E-t-i data was obtained by taking chronoamperograms at potentials applied as pulses on a staircase waveform. By using this three-way kind of data and appropriate calibration algorithms, the possibility of achieving the second-order advantage was evaluated in the determination of ferrocyanide in the presence of the uncalibrated interference hydroquinone as a model system. The determination of acetaminophen in urine samples, where ascorbic acid and uric acid play the major roles as interferents was also studied. Parallel factor analysis (PARAFAC) and multivariate curve resolution alternating least-squares (MCR-ALS) were the algorithms employed in this work. Both algorithms successfully achieved the second-order advantage by correctly predicting the concentrations of the validation synthetic samples. Excellent predictions were obtained in the direct analysis of acetaminophen-spiked urine samples by E-t-i data and MCR-ALS.

Ultrasensitive determination of sulfathiazole using a molecularly imprinted electrochemical sensor with CuS microflowers as an electron transfer probe and Au@COF for signal amplification

In this work, a molecularly imprinted sensor employing copper sulfide (CuS) as a novel signal probe was successfully developed for ultrasensitive and selective determination of sulfathiazole (STZ). The reduction signals of Cu²⁺ produced in the process of electron transfer of CuS containing large amounts of Cu²⁺ are easy to be captured, which provide high electrochemical signals. Moreover, gold nanoparticles@covalent organic framework with excellent conductivity was introduced on the electrode surface for signal amplification and facilitating electron transfer processes of CuS. Under optimized testing conditions, the proposed sensor offered a linear DPV response to STZ over a very wide concentration range (1.0 × 10^-4 to 1.0 × 10^-11 mol L^-1), with a limit of detection of 4.3 × 10^-12 mol L^-1. Fodder and mutton samples spiked with STZ were analyzed using this sensor, and the satisfactory recoveries ranging from 83.0% to 107.2% were obtained. In addition, the proposed sensor was used to determine the concentration of STZ in chicken liver and pork liver, with quantification results being near identical to those determined by high-performance liquid chromatography.

Development of magnetic porous carbon nano-fibers for application as adsorbents in the enrichment of trace Sudan dyes in foodstuffs

A novel kind of magnetic porous carbon nano-fibers (Fe₃O₄@P-CNFs) materials was successfully prepared and used as an adsorbent. Based on the above-mentioned adsorbent, a simple and effective magnetic disperse solid-phase extraction (MSPE) method was developed and first utilized to the enrichment and purification of five Sudan dyes (including Sudan I, Sudan II, Sudan III, Sudan IV, and Sudan Red 7B) in foodstuffs for the first time. High-performance liquid chromatography was used to determine the content of the Sudan dyes. The parameters affecting the extraction performance were studied and optimized, including the amount of the adsorbent and inorganic salt, type and the volume of the eluent, pH of the sample solution and extraction time. Under the optimized experimental conditions, the results show that the proposed method has a good linear relationship (r≥ 0.9993). The limits of detection range from 0.88 μg L^-1 to 1.27 μg L^-1. The recoveries range from 86.6% to 99.7% with the relative standard deviations ranging from 0.6% to 7.9% in the methodology validation. The above-mentioned results indicate that the proposed method is a sensitive and reliable procedure with good reproducibility for the detection of Sudan dyes residues in foodstuffs.

Approaches to Enhancing Gas Sensing Properties: A Review

A gas nanosensor is an instrument that converts the information of an unknown gas (species, concentration, etc.) into other signals (for example, an electrical signal) according to certain principles, combining detection principles, material science, and processing technology. As an effective application for detecting a large number of dangerous gases, gas nanosensors have attracted extensive interest. However, their development and application are restricted because of issues such as a low response, poor selectivity, and high operation temperature, etc. To tackle these issues, various measures have been studied and will be introduced in this review, mainly including controlling the nanostructure, doping with 2D nanomaterials, decorating with noble metal nanoparticles, and forming the heterojunction. In every section, recent advances and typical research, as well mechanisms, will also be demonstrated.