A novel fluorescence assay for resveratrol determination in red wine based on competitive host-guest recognition

What Can Fluorescence Tell Us About Wine?

Rapid and cost-effective measurements of the autofluorescence of wine can provide valuable information on the brand, origin, age, and composition of wine and may be helpful for the authentication of wine and detection of forgery. The list of fluorescent components of wines includes flavonoids, phenolic acids, stilbenes, some vitamins, aromatic amino acids, NADH, and Maillard reaction products. Distinguishing between various fluorophores is not simple, and chemometrics are usually employed to analyze the fluorescence spectra of wines. Front-face fluorescence is especially useful in the analysis of wine, obviating the need for sample dilution. Front-face measurements are possible using most plate readers, so they are commonly available. Additionally, the use of fluorescent probes allows for the detection and quantification of specific wine components, such as resveratrol, oxygen, total iron, copper, hydrogen sulfite, and haze-forming proteins. Fluorescence measurements can thus be useful for at least a preliminary rapid evaluation of wine properties.

In-Syringe Vortex-Assisted Liquid-Liquid Microextraction Based on Natural Deep Eutectic Solvent for Simultaneous Determination of the Two Anticancer Polyphenols Chrysin and Resveratrol

The simultaneous determination of multiple anticancer drugs in combination therapy poses a significant analytical challenge due to their complex nature and low concentrations. In this study, we propose an in-syringe vortex-assisted liquid-liquid microextraction (IS-VA-LLME), based on a green natural deep eutectic solvent (NaDES) for the simultaneous determination of two coadministered anticancer drugs (resveratrol and chrysin) prior to the HPLC-UV analysis, for the first time. The key parameters affecting the extraction efficiency, such as extraction solvent, vortex time, pH, and ionic strength were optimized. Under optimal conditions, the method demonstrates good linearity over the range of 0.05-15.0 μg/mL for RVT and 0.50-15.0 μg/mL for CHR with low limits of detection (LODs) of 16.78 and 161.60 ng/mL for RVT and CHR, respectively, confirming the high sensitivity of the method. The interday and intraday precision values, expressed as %RSDs, are below 2.0%, indicating good repeatability and reproducibility. Furthermore, the proposed method could be efficiently applied for the determination of the two drugs in human plasma and river water. The obtained results show satisfactory % recoveries (97.80%-102.04%), highlighting the accuracy and reliability of the developed method. The sustainability of the method was comprehensively evaluated using seven different tools. In conclusion, the developed IS-VA-LLME-NaDES allows for enhanced extraction efficiency, reduced extraction time, and improved recovery of the target analytes. This method holds great promise for applications in clinical and environmental research, enabling the precise quantification of these anticancer drugs in complex matrices.

Bimetallic porous Mn/Co oxide nanosheets with efficient oxidase-mimicking activity for the sensitive colorimetric determination of resveratrol in different matrices

BACKGROUND

Resveratrol, a natural polyphenol compound used as an ingredient in dietary supplements, and pharmaceuticals, has gained significant attention due to its potential health benefits. However, the accurate and sensitive determination of resveratrol in complex matrices remains a challenge. In this study, we propose the utilization of bimetallic porous Mn/Co oxide nanosheets (MnCoO-NSs) as catalysts for the colorimetric determination of resveratrol.

RESULTS

The bimetallic porous MnCoO-NSs were prepared through a facile one-stone-two-birds strategy. These nanosheets exhibited superior oxidase-mimicking activity, as evidenced by the catalytic oxidation of the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB), producing a blue-colored oxTMB species with a prominent absorbance peak at 655 nm. The catalytic activity was promoted through the production of superoxide anion (O2•-), which enhanced the affinity of MnCoO-NSs to the TMB molecules. Upon the addition of resveratrol, the oxidation process was inhibited, resulting in rapid fading of the blue color. This colorimetric sensing platform exhibited a linear response to resveratrol concentrations over the range of 2.2-87.6 μM, with a limit of detection of 0.210 μM. The method was further applied for the determination of resveratrol in different matrices including biological fluids, pharmaceuticals, and environmental water.

SIGNIFICANCE

The utilization of these MnCoO-NSs offers a simple and cost-effective alternative to conventional analytical techniques for the determination of resveratrol. Their high sensitivity, selectivity, and stability enable accurate measurements of resveratrol in various complex matrices. This research has implications in areas such as pharmaceutical analysis, biomedical research, and environmental analysis, where the reliable determination of resveratrol is crucial for assessing its therapeutic potential and ensuring product quality.

Current analytical strategies for the determination of resveratrol in foods

Resveratrol, a non-flavonoid polyphenolic compound, possesses various beneficial properties such as anti-cancer, anti-aging, anti-bacterial, and antioxidant effects. It is naturally produced by many plants in response to stimulation. However, the content of resveratrol in natural plants can vary significantly, ranging from micrograms to milligrams per kilogram. As the demand for resveratrol increases, the development of methods for extracting and quantifying resveratrol in food has become a rapidly growing field in recent years. This review aims to comprehensively summarize the progress made in resveratrol analysis in food over the past decade (2012-2022), with a specific focus on the latest advancements in extraction and detection technologies. The objective is to offer a valuable reference for further research and utilization of resveratrol in various food applications.

A novel copper-based nanozyme: fabrication and application for colorimetric detection of resveratrol

A novel nanozyme (urea@Cu-NF) was synthesized by self-assembly of urea and copper phosphate with urea as plasticizer. Urea@Cu-NF exhibited excellent peroxidase-like activity with the ability to oxidize TMB in the presence of H2O2. However, its peroxidase-like activity could be inhibited by resveratrol, leading to an absorption decrease in the intensity of oxTMB. Based on this phenomenon, a colorimetric method was designed for resveratrol detection. The colorimetric reaction could be completed within 20 min with a linear range of 1-120 μM. The limit of detection (LOD) of resveratrol is 0.43 μM. Our experimental results demonstrate that urea@Cu-NF has enormous potential to function as a cheap and accurate quality detection tool.

Fluorescent dual-mode sensor for the determination of graphene oxide and catechin in environmental or food field

The novel fluorescent sensor is proposed in this work based on the competitive interactions between the known bioactive compounds, riboflavin and catechin, which act as guests, and graphene oxide (GO) material that acts as host. Specifically, this proposal is based on an indicator displacement assay which allows the detection of GO and catechin (fluorescence quenching of riboflavin signal by GO and increase in fluorescence by catechin on the GO-riboflavin system). Three GO structures with different lateral dimensions and thickness were synthesized and tested, being able to be the three differentiated depending on the attenuation capacity of the fluorescent signal that each one possesses. The environmental analytical control of GO is more and more important, being this method sensitive and selective in the presence of other potential interferent substances. On the other hand, the other sensing capacity of the sensor also allows the determination of catechin in food samples based on the formation of riboflavin-GO complex. It is a rapid, simple and non-expensive procedure. Thus, the same 2D nanomaterial (GO) is seen to play a double role in this sensing strategy (analyte and analytical tool for the determination of another compound).

Self-Assembled Plasmonic Nanojunctions Mediated by Host-Guest Interaction for Ultrasensitive Dual-Mode Detection of Cholesterol

Herein, a fluorescence and surface-enhanced Raman spectroscopy dual-mode system was designed for cholesterol detection based on self-assembled plasmonic nanojunctions mediated by the competition of rhodamine 6G (R6G) and cholesterol with β-cyclodextrin modified on gold nanoparticles (HS-β-CD@Au). The fluorescence of R6G was quenched by HS-β-CD@Au due to the fluorescence resonance energy transfer effect. When cholesterol was introduced as the competitive guest, R6G in the cavities of HS-β-CD@Au was displaced to recover its fluorescence. Moreover, two of HS-β-CD@Au can be linked by one cholesterol to form a more stable 2:1 complex, and then, plasmonic nanojunctions were generated, which resulted in the increasing SERS signal of R6G. In addition, fluorescence and SERS intensity of R6G increased linearly with the increase in the cholesterol concentrations with the limits of detection of 95 and 74 nM, respectively. Furthermore, the dual-mode strategy can realize the reliable and sensitive detection of cholesterol in the serum with good accuracy, and two sets of data can mutually validate each other, which demonstrated great application prospects in the surveillance of diseases related with cholesterol.

Azocalixarene-Based Supramolecular System for the Detection of Paraquat via an Improved Indicator Displacement Assay

In view of the lethal toxicity of paraquat (PQ) on human health, herein, a simple indicator displacement assay (IDA) based on an azo-modified calixarene host (azoCX[4]) and a fluorophore guest (p-DPD) were elaborately constructed for PQ detection in environmental water samples and plant surfaces. The fluorescent signal of p-DPD in the probe can be quenched by azoCX[4] through a photon-induced electron transfer process and recovered upon the addition of PQ within 10 s. The detection range of the p-DPD@azoCX[4] probe was calculated to be 0.35-8 μM in the Tris-HCl buffer solutions (pH = 7.4). Moreover, this probe exhibited excellent detection selectivity toward PQ over five herbicides (glyphosate, bispyribac, atrazine, ametryn, and bensulfuron methyl), together with anti-interference abilities in the presence of inorganic ions (K⁺, Na⁺, Zn²⁺, Ni²⁺, Li⁺, F^-, Cl^-, Br^-, CO₃^2-, HCO₃^-, and NO₃^-) and amino acids (Asp, Arg, Glu, Ala, and Cys). Particularly, the probe was successfully used to detect PQ in real water samples with acceptable accuracy and showed potential applications for on-site detection with paper-based test strips and on the leaf surface. We believe that this simplified IDA-based probe provided an effective detecting tool for PQ, and the design strategy would guide the further development of new IDA sensing systems.

Resveratrol biosynthesis, optimization, induction, bio-transformation and bio-degradation in mycoendophytes

Resveratrol (3,4,5-trihydroxystilbene) is a naturally occurring polyphenolic stilbene compound produced by certain plant species in response to biotic and abiotic factors. Resveratrol has sparked a lot of interest due to its unique structure and approved therapeutic properties for the prevention and treatment of many diseases such as neurological disease, cardiovascular disease, diabetes, inflammation, cancer, and Alzheimer's disease. Over the last few decades, many studies have focused on the production of resveratrol from various natural sources and the optimization of large-scale production. Endophytic fungi isolated from various types of grapevines and Polygonum cuspidatum, the primary plant sources of resveratrol, demonstrated intriguing resveratrol-producing ability. Due to the increasing demand for resveratrol, one active area of research is the use of endophytic fungi and metabolic engineering techniques for resveratrol's large-scale production. The current review addresses an overview of endophytic fungi as a source for production, as well as biosynthesis pathways and relevant genes incorporated in resveratrol biosynthesis. Various approaches for optimizing resveratrol production from endophytic fungi, as well as their bio-transformation and bio-degradation, are explained in detail.

Resveratrol from Dietary Supplement to a Drug Candidate: An Assessment of Potential

Resveratrol (RVT) is a well known phyto-chemical and is widely used in dietary supplements and botanical products. It shows a wide range of pharmacological/beneficial effects. Therefore, it can be a potential candidate to be developed as phyto-pharmaceutical. Multiple diseases are reported to be treated by the therapeutic effect of RVT since it has antioxidant, anti-cancer activity and anti-inflammatory activities. It also has a major role in diabetes, arthritis, cardiac disorder and platelet aggregation etc. The major requirements are establishments regarding safety, efficacy profile and physicochemical characterization. As it is already being consumed in variable maximum daily dose, there should not be a major safety concern but the dose needs to be established for different indications. Clinical trials are also being reported in different parts of the world. Physicochemical properties of the moiety are also well reported. Moreover, due to its beneficial effect on health it leads to the development of some intellectual property in the form of patents.

Rapid, Highly-Sensitive and Ecologically Greener Reversed-Phase/Normal-Phase HPTLC Technique with Univariate Calibration for the Determination of Trans-Resveratrol

The rapid, highly-sensitive and ecologically greener reversed-phase (RP)/normal-phase (NP) high-performance thin-layer chromatography (HPTLC) densitometric technique has been developed and validated for the determination of trans-resveratrol (TRV). The reversed-phase HPTLC-based analysis of TRV was performed using ethanol–water (65:35, v v−1) combination as the greener mobile phase, while, the normal-phase HPTLC-based estimation of TRV was performed using chloroform–methanol (85:15, v v−1) combination as the routine mobile phase. The TRV detection was carried out at 302 nm for RP/NP densitometric assay. The linearity was recorded as 10–1200 and 30–400 ng band−1 for RP and NP HPTLC techniques, respectively. The RP densitometric assay was observed as highly-sensitive, accurate, precise and robust for TRV detection in comparison with the NP densitometric assay. The contents of TRV in commercial formulation were recorded as 101.21% utilizing the RP densitometric assay, while, the contents of TRV in commercial formulation were found to be 91.64% utilizing the NP densitometric assay. The greener profile of RP/NP technique was obtained using the analytical GREEnness (AGREE) approach. The AGREE scales for RP and NP densitometric assays were estimated 0.75 and 0.48, respectively. The recorded AGREE scale for the RP densitometric assay indicated that this technique was highly green/the ecologically greener compared to the NP densitometric assay. After successful optimization of analytical conditions, validation parameters, AGREE scale and chromatography performance, the RP densitometric assay with univariate calibration was found to be better than the NP densitometric assay for the analysis of TRV.

Graphene-Based Sensors for the Detection of Bioactive Compounds: A Review

Over the last years, different nanomaterials have been investigated to design highly selective and sensitive sensors, reaching nano/picomolar concentrations of biomolecules, which is crucial for medical sciences and the healthcare industry in order to assess physiological and metabolic parameters. The discovery of graphene (G) has unexpectedly impulsed research on developing cost-effective electrode materials owed to its unique physical and chemical properties, including high specific surface area, elevated carrier mobility, exceptional electrical and thermal conductivity, strong stiffness and strength combined with flexibility and optical transparency. G and its derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), are becoming an important class of nanomaterials in the area of optical and electrochemical sensors. The presence of oxygenated functional groups makes GO nanosheets amphiphilic, facilitating chemical functionalization. G-based nanomaterials can be easily combined with different types of inorganic nanoparticles, including metals and metal oxides, quantum dots, organic polymers, and biomolecules, to yield a wide range of nanocomposites with enhanced sensitivity for sensor applications. This review provides an overview of recent research on G-based nanocomposites for the detection of bioactive compounds, providing insights on the unique advantages offered by G and its derivatives. Their synthesis process, functionalization routes, and main properties are summarized, and the main challenges are also discussed. The antioxidants selected for this review are melatonin, gallic acid, tannic acid, resveratrol, oleuropein, hydroxytyrosol, tocopherol, ascorbic acid, and curcumin. They were chosen owed to their beneficial properties for human health, including antibiotic, antiviral, cardiovascular protector, anticancer, anti-inflammatory, cytoprotective, neuroprotective, antiageing, antidegenerative, and antiallergic capacity. The sensitivity and selectivity of G-based electrochemical and fluorescent sensors are also examined. Finally, the future outlook for the development of G-based sensors for this type of biocompounds is outlined.

Selective Detection of Methomyl Pesticide by a Catalytic Chemosensing Assay

The catalytic chemosensing assay (CCA), a new indicator displacement assay, was developed for selective detection of methomyl, a highly toxic pesticide. Trimetallic complex {[Fe^II (dmbpy)(CN)₄ ]-[Pt^II (DMSO)Cl]₂ -[Ru^II (bpy)₂ (CN)₂ ]} (1; dmbpy=4,4'-dimethyl-2,2'-bipyridine, bpy=2,2'-bipyridine) was synthesized as a task-specific catalyst to initially reduce and degrade methomyl to CH₃ SH/CH₃ NH₂ /CH₃ CN/CO₂ . The thus-produced CH₃ SH interacts with the trimetallic complex to displace the cis-[Ru^II (bpy)₂ (CN)₂ ] luminophore for monitoring. Other pesticides, including organophosphates and similar carbamate pesticides, remained intact under the same catalytic conditions; a selective sensing signal is only activated when 1 recognizes methomyl. Furthermore, 1 can be applied to detect methomyl in real water samples. In the luminescent mode of the assay, the method detection limit (MDL) of 1 for methomyl (LD₅₀ =17 mg kg^-1 ) was 1.12 mg L^-1 .

Study of the controversial resveratrol that interact with the endogenous glutathione thiyl radical in cancer cells

Found in various natural food products, many in vitro evidence indicated that resveratrol (RES) has been linked to neuroprotective and cardioprotective effects and prevent cancer development. However, human clinical trials have been conducted with varying results, making the usage of RES controversial. In this paper, we demonstrated that the drug RES could be conjugated with the high levels of endogenous GS^• in cancer cells. 5,5-Dimethyl-1-Pyrroline-N-Oxide (DMPO) was employed to capture the GS^•. The molecular mechanism of the reaction between RES and GS^• was further studied by UV-Vis spectrometry, mass spectrometry and Density Functional Theory (DFT) calculations. Besides, the formation of the adduct GS-RES in cancer cell was obtained when RES was added during incubation. Further study indicated that over 77.6% of the RES was consumed in cancer cells. This study suggested that endogenous GS^• may be one of the important factors to cause the depletion of anti-tumour drugs during chemotherapy, which should be paid special attention in clinical therapeutics and drug development.

Evaluation of the status quo of polyphenols analysis: Part II-Analysis methods and food processing effects

Nowadays due to the concern with the environmental impact of analytical techniques and in order to reduce the ecological footprint there is a tendency to use more efficient and faster procedures that use a smaller amount of organic solvents. Polyphenols have been widely studied in plant-based matrices due to their wide and potent biological properties; however there are no standardized procedures both for sample preparation and analysis of these compounds. The second of a two-part review will carry out a critical review of the extraction procedures and analytical methods applied to polyphenols and their selection criteria over a wide range of factors in relation to commerce-associated, environmental, and economic factors. It is foreseen that in the future the analysis of polyphenols in plant-based matrices includes the use of techniques that allow the simultaneous determination of different subclasses of polyphenols using fast, sophisticated, and automated techniques that allow the minimal consumption of solvents.