Analyzing 2-acetyl-4(5)-(1,2,3,4-tetrahydroxybutyl)-imidazole in beverages by dispersive micro-solid phase extraction using polymer cation exchange sorbent followed by ion chromatography and liquid chromatography coupled with tandem mass spectrometry

Facile extraction and determination of organophosphorus pesticides using poly (8-hydroxyquinoline) functionalized magnetic multi-walled carbon nanotubes nanocomposite in water, fruits, and vegetables samples

This study presents a dispersive micro-solid phase extraction (D-μ-SPE) approach for extracting and determining of two organophosphorus pesticides (OPPs), including diazinon and chlorpyrifos as model analytes in various samples. For this purpose, we synthesized, characterized, and utilized magnetic multi-walled carbon nanotubes coated with poly 8-hydroxyquinoline (MWCNTs/Fe3O4@PHQ) as a novel sorbent. The impact of various parameters, including sorbent type, sample pH, sample volume, sorbent amount, desorption solvent (type and volume), extraction time, and ionic strength on the extraction efficiency was investigated and optimized. Following the extraction, the desorbed pesticides in acetone were analyzed using gas chromatography with an FID detector. Under the optimized experimental conditions, the proposed method showed excellent linearity in the range of 3-1000 µg/L, low detection limit (0.9-1.5 µg/L), good relative recoveries (86-101.5 %), and high precision (RSD < 6.5 %). Finally, the applicability of this method was evaluated by analyzing the target OPPs in a variety of real samples, and obtained satisfactory results.

Surfactant modified coconut husk fiber as a green alternative sorbent for micro-solid phase extraction of triazole fungicides at trace level in environmental water, soybean milk, fruit juice and alcoholic beverage samples

In this work, micro-solid phase extraction using surfactant modified biosorbent was investigated for trace level determination of triazole fungicides prior to their analysis by high performance liquid chromatography. Coconut husk fiber (CHF) was selected as an effective biosorbent in the extraction process. Fourier transform infrared spectrometry, scanning electron microscopy and transmission electron microscopy methods were used to characterize the modified biosorbent. Various factors affecting the extraction efficiency of the proposed method were studied including the amount of coconut husk fiber biosorbent (0.1 g), kind and concentration of surfactant as a modifier (sodium dodecyl sulfate, 10 mmol L-1), kind and volume of desorption solvent (methanol, 150 μL), and extraction period (including vortex adsorption time, centrifugation adsorption time, vortex desorption time and centrifugation adsorption time approximately 10 min). Under the selected conditions, the calibration plot was found to be linear in the range of 9-300 μg L-1 with a coefficient for determination of greater than 0.99. The limits of detection and limits of quantification for the studied triazole fungicides were 3.00 and 9.00 μg L-1, respectively. Finally, the proposed method was successfully applied to determine triazole fungicides in environmental water, soybean milk, fruit juice and alcoholic beverage samples with acceptable recoveries obtained in the range of 67.0% to 105.0%.

Modified Peanut Shell as an Eco-Friendly Biosorbent for Effective Extraction of Triazole Fungicide Residues in Surface Water and Honey Samples before Their Determination by High-Performance Liquid Chromatography

An eco-friendly sample preparation method that is based on the use of a modified peanut shell as an efficient biosorbent for the extraction of triazole residues before their analysis by high-performance liquid chromatography was reported. The four triazole fungicides were separated on a Purospher STAR RP-18 endcapped (4.6 × 150 mm, 5 μm) column with a mobile phase of 50% (v/v) acetonitrile at a flow rate of 1.0 mL min^-1 and detection wavelength set at 220 nm. Peanut shells modified by didodecyldimethylammonium bromide were selected as an effective biosorbent material in the microextraction method. Scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy were used to characterize the biosorbent. The effect of dominant parameters on the proposed microextraction method including the amount of sorbent, kind and concentration of surfactant, sodium hydroxide concentration, kind and amount of salt, sample volume, adsorption time, kind and volume desorption solvent, and desorption time was studied. Under the optimum condition, a good analytical performance for the proposed microextraction method was obtained with a wide linear range within the range of 9-1000 μg L^-1, and low limits of detection (0.03 μg L^-1 for all analytes) were obtained. Enrichment factors were achieved within the range of 30-51. The intra and interday precision values were evaluated in terms of percentage relative standard deviations (%RSD) and were less than 0.09 and 5.34% for the retention time and peak area, respectively. The proposed microextraction methods were used for extraction and analysis of triazole fungicides in water and honey samples. The recoveries in a satisfactory range of 70.0-118.8% were obtained.

A polymer-based dispersive solid phase extraction combined with deep eutectic solvent based-dispersive liquid-liquid microextraction for the determination of four hydroxylated polycyclic aromatic hydrocarbons from urine samples

A new and efficient extraction procedure was proposed and used for the simultaneous extraction of four hydroxylated metabolites polycyclic aromatic hydrocarbons from urine samples. The extraction procedure was started by dissolving an organic polymer into a water-miscible organic solvent (iso-propanol) and its injection into the sample solution. The sorbent was re-precipitated in all parts of the solution as tiny particles and the analytes were adsorbed onto the sorbent. After that, the sorbent was separated and the adsorbed analytes were eluted by choline chloride: dichloroacetic acid deep eutectic solvent. The elution solvent was mixed with choline chloride-3,3-dimethyl butyric acid deep eutectic solvent and the mixture was applied in dispersive liquid-liquid microextraction procedure for more concentration of the analytes. After optimization, the method validation was followed according to International Council Harmonization guidelines and the results showed that wide linear ranges (26-500 000 ng/L) and low limits of detection (3.6-7.2 ng/L) and quantification (11-26 ng/L) were obtained. Satisfactory enrichment factors (435-475) and extraction recoveries (87-95%), and acceptable relative standard deviations (equal or less than 8.6%) were obtained. Finally, the introduced method was successfully applied for determination of the analytes in urine samples obtained from tobacco smokers.

Application of electrospun polyacrylonitrile/Zn-MOF-74@GO nanocomposite as the sorbent for online micro solid-phase extraction of chlorobenzenes in water, soil, and food samples prior to liquid chromatography analysis

An online micro solid-phase extraction (online-µSPE) using electrospun nanofibers, as an efficient sorbent, was developed to extract chlorobenzenes (CBs) from paddy soil, agricultural wastewater, and food samples (fruit juices, vegetables, rice samples) followed by high performance liquid chromatography analysis. Electrospun nanofibers were fabricated using a nanocomposite containing polyacrylonitrile and Zn-metal organic framework 74 @graphene oxide (PAN/Zn-MOF-74@GO), and subsequently characterized. Under the optimal conditions, acceptable linearity was obtained in the range of 0.25-700.00 ng mL^-1 for 1,2-dichlorobenzene (1,2-DCB) and 2.50-700.00 ng mL^-1 for both 1,2,3-trichlorobenzene (1,2,3-TCB) and 1,2,4-trichlorobenzene (1,2,4-TCB) with determination coefficients ≥ 0.9991. The limits of detection ranged from 0.08 to 1.10 ng mL^-1. The intra-day and inter-day single fiber and fiber to fiber relative standard deviations were observed in the range of 4.1%-9.5% and 5.8%-12.1%, respectively. The performance of this method was examined by determining the target analytes in the different spiked samples.

Selective extraction and enhanced-sensitivity detection of fluoroquinolones in swine body fluids by liquid chromatography-high resolution mass spectrometry: Application in long-term monitoring in livestock

To ensure food safety in livestock industries, developing a non-lethal and cost-effective detection method for the long-term monitoring of veterinary antibiotics in animals will be beneficial to avoid unnecessary losses. In this study, a highly-selective extraction using dispersive micro solid-phase extraction method coupled with an enhanced-sensitivity detection by pre-column dilution injection and liquid chromatography-high resolution mass spectrometry was used to determine the restricted fluoroquinolones (FQs) in swine body fluids. The proposed method showed good linear coefficients higher than 0.999, and high sensitivity with the LODs and LOQs in the range of 0.02-0.03 μg/L and 0.06-0.1 μg/L in swine body fluids, respectively. For further evaluation, the adequate recoveries (85.3-112.8%), satisfactory repeatability (intra-day and inter-day precisions of 2.1%-8.2% and 3.8%-13.7%, respectively), and acceptable matrix effect (0.92-1.12) of the FQs were achieved. It has been successfully applied for analysis of the FQs in body fluids without sacrificing animals in the future.

Electrochemically synthesized NiFe layered double hydroxide modified Cu(OH)2 needle-shaped nanoarrays: A novel sorbent for thin-film solid phase microextraction of antifungal drugs

Herein, we applied a simple electrosynthesis process to deposit nickel-iron layered double hydroxides (NiFe LDH) on the surface of copper hydroxide (Cu(OH)₂) needle-shaped nanoarrays and introduce a new sorbent for thin-film solid phase microextraction (TF-SPME). For this purpose, the nanoarrays were grown via electrochemical anodization on a copper foil's surface and then modified with NiFe LDH. The synthesized sorbent was characterized by field emission-scanning electron microscopy, Brunauer-Emmett-Teller (BET), and Barrett-Joiner-Halenda (BJH) analysis, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The Cu(OH)₂-NiFe LDH based TF-SPME method was used to measure antifungal drugs in veterinary plasma samples followed by HPLC-UV analysis. The effects of various parameters in the extraction efficiency, including pH (5.0), extraction time (20 min), stirring rate (500 rpm), and salt effect (5.0%), type of eluent (acetonitrile), eluent volume (100 μL) and desorption time (5 min) were thoroughly optimized. Under the optimum conditions, limits of detection for ketoconazole, clotrimazole, and miconazole were obtained below 10 ng mL^-1. Intra-day, inter-day and film-to-film RSDs% were obtained less than 6.2%, 7.3% and 7.0%, respectively. Moreover, calibration plots were linear from 30 to 5000 ng mL^-1 for ketoconazole, 8.0-1000 ng mL^-1 for clotrimazole, and 15-1000 ng mL^-1 for miconazole, with determination coefficients between 0.9937 and 0.9971. Finally, good relative recoveries (%) in the range of 85-97% were obtained for measuring trace amounts of antifungal drugs in dogs' plasma samples. As a result, the method can be considered as an appropriate alternative to the conventional sample preparation methods for measuring trace amounts of antifungal drugs in biological samples.

Porphyrin-functionalized graphene oxide sheets: An efficient nanomaterial for micro solid phase extraction of non-steroidal anti-inflammatory drugs from urine samples

In this work, porphyrin-functionalized graphene oxide nanosheets (GO@meso-tetrakis(4-hydroxyphenyl)porphyrin) were synthesized and employed as the sorbent. Porphyrins owing to their unique structures and tunable terminal functional groups are expected to be promising media for extraction of the desired analytes. Also, GO with a high specific surface area has exhibited good potential for the extraction purposes. Inspired by these intriguing properties, the combination of GO and porphyrin can benefit both of these amazing features. The synthesized sorbent was utilized for micro solid phase extraction of non-steroidal anti-inflammatory drugs followed by HPLC-UV. Optimization of the experimental factors including sorbent amount, sample pH, sample and eluent flowrates, eluent volume, and the number of desorption cycles were performed with the aid of central composite design. Under the optimal conditions, the calibration curves were linear within the range of 2.0-600 ng mL^-1 and limits of detection were found between 0.5-2.0 ng mL^-1. The preconcentration factors and absolute recoveries were obtained in the range of 4.80-9.79 and 29%-59%, respectively. The matrix effect for the urine samples varied between 81.9%-91.6% at two concentrations of 50 and 300 ng mL^-1, respectively. Intra- and inter-day RSD% (n = 3) of the spiked urine samples at three level concentrations of 25, 100, and 300 ng mL^-1 were less than 10%. The relative recoveries of the urine samples were calculated in the range of 85.2-98.6%. Eventually, the method exhibits proper sensitivity, excellent repeatability, high reusability, and acceptable precision and accuracy.