Preparation, characterization, rheological and antioxidant properties of ferulic acid-grafted curdlan conjugates

Feruloylation of arabinoxylan enhances the protective effects on probiotic viability and stability in tablet formulations

Maintaining probiotic viability during storage and gastrointestinal transit is crucial for supplement efficacy. This study was to investigate the protective effects of modified arabinoxylan (AX) by feruloylation in tablets. AX was feruloylated with various ferulic acid (FA) contents (0-106 mg/g) into high (H-FAX), medium (M-FAX), and low (L-FAX) FA content matrices. Tube inversion test revealed that increased FA content reduced the critical concentration for gel formation, with H-FAX showing gelation at 25 % w/v compared to 35 % w/v for L-FAX. The FAX matrices demonstrated superior protection of probiotic during tablet compression compared to conventional excipients, maintaining viability above 7.95 × 109 CFU/tablet. Higher FA content improved mechanical properties resulted in better probiotic survival rates in simulated gastric (pH 2.0) and intestinal (pH 7.2) conditions. Storage at 4 °C maintained probiotic viability above 4.67 × 109 CFU/tablet for 12 months. The FAX matrix's protective barrier slowed probiotic release and shielded cells from harsh gastrointestinal conditions, while bound ferulic acid's antioxidant effects enhanced survival, ensuring effective colon delivery. These findings demonstrate that FAX matrices' potential in probiotic tablet formulations, with FA content being critical for optimizing protection. This work provides new insights for developing improved probiotic delivery tablets using naturally derived polymers.

Grafting of syringic acid onto fucoidan: Enhanced functional properties and therapeutic potential in histamine-induced liver injury

This study explores the grafting of syringic acid onto fucoidan and assesses the resultant graft's (FS) enhanced functional properties and therapeutic potential in a histamine-induced liver injury model. Utilizing a redox system of ascorbic acid and hydrogen peroxide, the grafting process achieved a grafting rate of 290.45 mg CAE/g, confirmed through UV-Vis spectroscopy, FT-IR spectroscopy, scanning electron microscopy, and thermogravimetric analysis. In vivo investigations using histamine-sensitive mice demonstrated that FS significantly mitigated histamine-induced damage, evidenced by improvements in body weight, organ index, and colon length. FS exhibited superior efficacy in restoring liver function indices (ALT, AST, ALP, GGT), enhancing antioxidant defenses (GSH, SOD), and reducing oxidative stress markers (MDA). Anti-inflammatory effects included reduced levels of pro-inflammatory cytokines (TNF-α, IL-6, IL-1β) and modulation of apoptosis-related proteins (BCl2, BAX). Additionally, FS upregulated key antioxidant genes in the Nrf2/KEAP1 pathway and downregulated inflammatory genes in the NF-κB pathway. Restoration of colonic tight junction proteins (ZO-1, Occludin, Claudin-1) and normalization of gut microbiota composition further underscored the therapeutic potential of FS. The study highlights the significant enhancement in functional properties of fucoidan through SA grafting, presenting FS as a promising candidate for developing functional foods and nutraceuticals aimed at preventing and mitigating liver damage and related disorders.

Synthesis, characterization and application of sugar beet pectin-ferulic acid conjugates in the study of lipid, DNA and protein oxidation

In this study, ferulic acid (FA) was enzymatically grafted onto sugar beet pectin (SBP) via laccase catalysis. Structural characterization of sugar beet pectin-ferulic acid conjugates (SFC) with varying substitution degrees was performed using UV-vis, FT-IR, and NMR analyses. Mechanistic analyses revealed that phenolic hydroxyl groups (-OH) on FA reacted with carboxyl groups (-COOH) of SBP via enzymatic catalysis, forming covalent linkages. Additionally, amide bond formation between FA's carboxyl groups and amino groups (-NH₂) of pectin-associated proteins was observed. Compared to unmodified pectin, SFC exhibited reduced crystallinity, lower apparent viscosity, and smoother surfaces, whereas thermal stability and in vitro antioxidant capacity were markedly improved. Notably, SFC with high substitution (>159.60 ± 0.60 mg/g) effectively inhibited malondialdehyde (92.18 %) and peroxide (61.29 %) formation in linoleic acid oxidation systems, while demonstrating DNA (66.07 %) and protein (17.79 %) oxidation inhibition through reduced carbonyl generation. These findings highlight SFC's potential as a multifunctional antioxidant in food and pharmaceutical applications.

Interactions between polyphenols and polysaccharides/proteins: Mechanisms, effect factors, and physicochemical and functional properties: A review

Polyphenols have attracted much attention in the food industry and nutrition because of their unique biological activities. However, the health benefits of polyphenols are compromised due to their structural instability and sensitivity to the external environment. The interaction between polyphenols and polysaccharides/proteins largely determines the stability and functional characteristics of polyphenols in food processing and storage. Hence, this topic has attracted widespread attention in recent years. This review initially outlines the basic properties of polyphenols and their applications in food. Subsequently, the interaction mechanisms between polyphenols and polysaccharides/proteins are discussed in detail including non-covalent bonding, covalent modification, and conformational changes. These interactions can display profound impacts on the nutritional value, taste, stability, and safety of food. Additionally, this article also systematically reviews the influencing factors (type, concentration, temperature, pH, and other factors) of interaction between polyphenols and proteins/polysaccharides. Finally, this paper also summarizes systematically the effects of the interaction between polyphenols and polysaccharides/proteins on the physicochemical and functional properties of polyphenols/proteins. The findings provide prospects for the application of composite materials in food preservation, functional food development, and nanocarrier development, which can provide theoretical references for the in-depth development of polyphenols in the food industry.

Biosynthesis of Feruloyl Glycerol from Ferulic Acid and Glycerol Through a Two-Enzyme Cascade Reaction

Feruloyl glycerol (FG) has a variety of biological activities, but the green synthesis methods of FG remain rare. In this study, FG was prepared by a cascade reaction catalyzed by 4-coumarate coenzyme A ligase (4CL) and hydroxycinnamoyl acyltransferase 4 (HCT4). The cascade reaction carried out at solvent water and room temperature is more convenient and greener. Firstly, the product derived from the cascade reaction was characterized by TLC, HPLC, FTIR, and ESI-MS. The results showed that the product was FG. Secondly, the effects of temperature, pH, enzyme ratio, Mg2+ concentration, and CoA concentration on the cascade reaction were investigated. Consequently, the highest reaction rate was obtained at 30 °C, pH 6, an enzyme ratio of 1:3, and Mg2+ concentration of 5 mM. Finally, semi-preparative scale synthesis for FG was conducted. The production of FG reached 35.1 mM at 24 h with the FG conversion of 70.18%. In a word, a novel idea for the efficient and green synthesis of FG was proposed, which had great potential for industrial application.

Ferulic acid-arabinoxylan conjugates: Synthesis, characterization and applications in antibacterial film formation

A novel antibacterial film based on arabinoxylan (AX) was prepared by introducing ferulic acid (FA) to AX through a laccase-catalyzed procedure. The ferulic acid-arabinoxylan conjugates (FA-AX conjugates) have been characterized. Results showed that FA was successfully grafted onto the AX chains by covalent linkages, likely through nucleophilic addition between O-Ph in the phenolic hydroxyl group of FA, or through Michael addition via O-quinone intermediates. FA-AX conjugates showed improved crystallinity, thermal stability, and rheological properties, as well as a distinct surface morphology, compared with those of native AX. Moreover, FA-AX conjugates exhibited enhanced antibacterial ability against Staphylococcus aureus, Escherichia coli, Shewanella sp., and Pseudomonas sp. Mechanistic studies revealed that the enhanced antibacterial ability was due to the penetration of bacterial membrane by the phenolic molecule and the steric effect of FA-AX conjugates. The study demonstrates that the laccase-induced grafting method was effective in producing FA-AX conjugates; we have demonstrated its antibacterial ability and great potential in prolonging the shelf life of fresh seafood products.

Functionalisation and behaviours of polysaccharides conjugated with phenolic compounds by oxidoreductase catalysis: A review

Polysaccharides have been extensively studied in recent decades. Their conjugation with phenolic compounds of natural origin has demonstrated high added value, not only enhancing certain inherent properties but also introducing new ones. Recently, a sustainable approach utilizing oxidoreductase enzymes (Oxredases) (laccases (Lac), tyrosinases (Tyr) and peroxidases (Per)) has been employed, and interesting progress has been made. This review aims to provide a comprehensive understanding of the various Oxredases employed and the reaction mechanisms involved in the grafting of phenolic compounds (PCs) onto polysaccharides (PSs). We provide a detailed analysis of these reaction mechanisms based on modified polymer structural analysis techniques and supported by model reactions. The impacts of different reaction parameters on the final products are thoroughly discussed. Additionally, the properties of conjugated PS-PC are extensively explored to provide an overview of their physicochemical and functional behaviours. A comparison of the PS-PC conjugates obtained via the Oxredase approach and other existing chemical- and radical-mediated approaches is also presented, emphasizing the benefits of this enzymatic pathway. Finally, a critical analysis is proposed to identify areas of improvement, aiming to further refine this environmentally friendly approach for conjugating PSs and PCs and its scalability for industrial applications.

High methoxyl pectin grafted onto gallic acid by one- and two-pot redox-pair procedures

The aim of this research was to graft gallic acid (GA) onto high methoxyl pectin (HMP) through the redox-pair of ascorbic acid (Aa) and hydrogen peroxide (H2O2) with one- and two-pot procedures. The effectiveness of the both procedures and the chemical, physical and antioxidant properties of the obtained HMP-GA were evaluated. HMP-GAone-pot (23.3 ± 0.21 mg GA Equivalent (GAE)/g) and HMP-GAtwo-pot (32.3 ± 0.52 mg GAE/g) were best obtained at H2O2/Aa molar ratio-HMP/GA weight ratio of 9.0-0.5 and 16.0-0.5, respectively. The UV-Vis and FT-IR spectra and along with their derivative and thermal gravimetric analyses, revealed differences between HMP-GAone-pot and HMP-GAtwo-pot. The latter exhibited a greater antioxidant capacity than the former in single electron transfer (ET), hydrogen atom transfer (HAT), and ET-HAT mixed assays. The chemical differences can be attributed to side reactions that may have interfered with the grafting reaction. Consequently, HMP-GA, possessing unique antioxidant and prebiotic properties, can be synthesized through redox-pair procedures.

Microbial Polysaccharides as Functional Components of Packaging and Drug Delivery Applications

This review examines microbial polysaccharides' properties relevant to their use in packaging and pharmaceutical applications. Microbial polysaccharides are produced by enzymes found in the cell walls of microbes. Xanthan gum, curdlan gum, pullulan, and bacterial cellulose are high-molecular-weight substances consisting of sugar residues linked by glycoside bonds. These polysaccharides have linear or highly branched molecular structures. Packaging based on microbial polysaccharides is readily biodegradable and can be considered as a renewable energy source with the potential to reduce environmental impact. In addition, microbial polysaccharides have antioxidant and prebiotic properties. The physico-chemical properties of microbial polysaccharide-based films, including tensile strength and elongation at break, are also evaluated. These materials' potential as multifunctional packaging solutions in the food industry is demonstrated. In addition, their possible use in medicine as a drug delivery system is also considered.

Characterization of free radical-mediated Pleurotus ostreatus polysaccharide-EGCG conjugates for chilled minced pork preservation

To improve the functions of Pleurotus ostreatus polysaccharide (POP), POP-EGCG conjugates were prepared using free radical graft polymerization reactions and were characterized using UV-vis, FT-IR, SEM, XRD, DSC, TG, particle size and potential, three-phase contact angle, and rheological tests; The antioxidant and antibacterial ability in vitro were detected. Moreover, effects of POP-EGCG on the quality of refrigerated minced pork were investigated. The results showed the optimal preparation conditions of POP-EGCG were 1 % POP, 1.3 % EGCG, 0.25 % Vc, 16 % concentration of H2O2, and reaction 17 h. The POP-EGCG showed the characteristic peak of EGCG and was a mesh honeycomb with rough and porous surface; It had higher crystallinity, increased particle size, but decreased thermal stability, solubility, and viscosity, and significantly enhanced antioxidant and antibacterial ability. The POP-EGCG effectively improved the sensory quality and inhibited lipid oxidation of chilled minced pork, and extended the shelf life of minced pork up to 9 days at 4 °C. Specifically, the TVB-N and TBARS of minced pork in the POP-EGCG group were respectively 14.93 mg/100 g and 0.9 mg MDA/kg, which were lower than the spoilage thresholds in the national standard. This study provides a theoretical basis for further development of natural antioxidants and antimicrobial agents.

Ferulic acid-g-tamarind gum/guar gum based in situ gel-forming powders as wound dressings

The current research endeavour aimed to synthesize ferulic acid grafted tamarind gum/guar gum (FA-g-TG/GG) based powders as wound dressings, which could form in situ gels upon contact with wound exudates. In this context, variable amounts of FA were initially grafted with TG via the Steglich esterification reaction protocol and the resulting conjugates were subsequently amalgamated with GG and lyophilized to produce dry powders (F-1 - -F-3) with average particle size within 5.10-5.54 μm and average angle of repose ∼30°. These powders were structurally characterized with 1H NMR, FTIR, DSC, TGA, XRD and SEM analyses. Pristine TG, FA-g-TG and FA-g-TG/GG powders (F-2) revealed their distinct morphological structures and variable negative zeta potential values (-11.06 mV-25.50 mV). Among various formulation (F-1-F-3), F-2 demonstrated an acceptable powder-to-gel conversion time (within 20 min), suitable water vapour transmission rates (WVTR, 2564.94 ± 32.47 g/m2/day) and excellent water retention abilities and swelling profiles (4559.00 ± 41.57 %) in wound fluid. The powders were cytocompatible and conferred antioxidant activities. The powders also displayed fibroblast cell proliferation, migration and adhesion properties, implying their wound-healing potentials. Thus, the developed in situ gel-forming powders could be employed as promising dressings for wound management.

Extraction, Identification, and In Vitro Anti-Inflammatory Activity of Feruloylated Oligosaccharides from Baijiu Distillers' Grains

The structure and function of phenoyl oligosaccharides in baijiu distillers' grains (BDGs) have not been identified and investigated yet. This study aimed to elucidate the major phenolic oligosaccharides present in BDGs, optimize their extraction process via a central composite design, and assess their anti-inflammatory properties utilizing the LPS-induced RAW264.7 inflammation model. The main results are as follows: feruloylated oligosaccharides (FOs) were identified as the main phenoyl oligosaccharides in BDGs with a structure of ferulic acid esterified on arabinooligosaccharide xylose. Then, the preparation process of FOs was optimized using the following conditions: pH 5, temperature 55 °C, time 12 h, xylanase addition amount 7 g/L, BDG concentration 120 g/L. Furthermore, the acquired FOs demonstrated notable scavenging activity against DPPH and ABTS free radicals, with Trolox equivalent values of 366.8 ± 10.38 and 0.35 ± 0.01 mM Trolox/mg sample, respectively. However, their efficacy was comparatively lower than that of ferulic acid. Finally, the obtained FOs could effectively inhibit the LPS-induced secretion of TNF-α, IL-6, and IL-1β and promote the secretion of IL-10 in RAW264.7 cells. Based on the above results, FOs from BDGs were determined to have certain antioxidant and anti-inflammatory activities.

Grafting chlorogenic acid enhanced the antioxidant activity of curdlan oligosaccharides and modulated gut microbiota

In this study, the effects of grafting chlorogenic acid (CA) on the antioxidant and probiotic activities of curdlan oligosaccharides (CDOS) were investigated. CDOS with degrees of polymerization of 3-6 was first obtained by degradation of curdlan with hydrogen peroxide and then grafted with CA using a free radical-mediated method under an ultrasonication-assisted Fenton system. The thermal stability and antioxidant ability of CDOS were enhanced after grafting with CA. In vitro fermentation, supplementation of CDOS-CA stimulated the proliferation of Prevotella and Faecalibacterium while inhibiting the growth of harmful microbiota. Notably, the concentration of total short-chain fatty acids and the relative abundance of beneficial bacteria markedly increased after fermentation of CDOS-CA, indicating that CA grafting could improve the probiotic activity of CDOS. Overall, the covalent binding of CDOS and CA could enhance the antioxidant and probiotic activities of CDOS, suggesting potential improvements in gastrointestinal and colonic health.

Development of Biological Coating from Novel Halophilic Exopolysaccharide Exerting Shelf-Life-Prolonging and Biocontrol Actions for Post-Harvest Applications

The literature presents the preserving effect of biological coatings developed from various microbial sources. However, the presented work exhibits its uniqueness in the utilization of halophilic exopolysaccharides as food coating material. Moreover, such extremophilic exopolysaccharides are more stable and economical production is possible. Consequently, the aim of the presented research was to develop a coating material from marine exopolysaccharide (EPS). The significant EPS producers having antagonistic attributes against selected phytopathogens were screened from different marine water and soil samples. TSIS01 isolate revealed the maximum antagonism well and EPS production was selected further and characterized as Bacillus tequilensis MS01 by 16S rRNA analysis. EPS production was optimized and deproteinized EPS was assessed for biophysical properties. High performance thin layer chromatography (HPTLC) analysis revealed that EPS was a heteropolymer of glucose, galactose, mannose, and glucuronic acid. Fourier transform infrared spectroscopy, X-ray diffraction, and UV-visible spectra validated the presence of determined sugars. It showed high stability at a wide range of temperatures, pH and incubation time, ≈1.63 × 106 Da molecular weight, intermediate solubility index (48.2 ± 3.12%), low water holding capacity (12.4 ± 1.93%), and pseudoplastic rheologic shear-thinning comparable to xanthan gum. It revealed antimicrobial potential against human pathogens and antioxidants as well as anti-inflammatory potential. The biocontrol assay of EPS against phytopathogens revealed the highest activity against Alternaria solani. The EPS-coated and control tomato fruits were treated with A. solani suspension to check the % disease incidence, which revealed a significant (p < 0.001) decline compared to uncoated controls. Moreover, it revealed shelf-life prolonging action on tomatoes comparable to xanthan gum and higher than chitosan. Consequently, the presented marine EPS was elucidated as a potent coating material to mitigate post-harvest losses.

In silico Evaluation of Ferulic Acid Based Multifunctional Conjugates as Potential Drug Candidates

BACKGROUND

Recent research has shown that ferulic acid (FA, trans-4-hydroxy-3- methoxycinnamic acid) has remarkable antioxidant properties and a wide range of biological activities. Conjugation of two or more biologically active compounds to produce a novel molecular scaffold is justified by the need to enhance biological activity against a single target or obtain a conjugate that behaves as a multi-target-directed ligand. In addition, the conjugation strategy decreases dose-dependent side effects by promoting the use of smaller doses of conjugated components to treat the disease. Moreover, the patient's compliance is positively affected when conjugating two active compounds into a single more active compound as this reduces the number of pills to be taken daily.

OBJECTIVE

This study aims to shed light on studies that design and synthesize FA-based hybrid compounds with enhanced biological activities and to in silico assess these compounds as potential drug candidates.

METHODS

The conjugate compounds were found by searching the literature using the keywords (ferulic acid-based hybrid or ferulic acid-based conjugate). To study conjugate pharmacokinetic parameters and toxicity (ADMET), software suites from Biovia Inc. (San Diego, California) were integrated into Discovery Studio 4.5. The structures were created using ChemDraw Ultra 7.0.

RESULTS

14 conjugates exhibiting variable biological activities were collected and three of them (compounds 3,5, and 6) in addition to the cis FA (compound 12) are the best-predicted compounds with low Daphnia toxicity and hepatotoxicity with acceptable pharmacokinetic properties.

CONCLUSION

Cis FA, FA conjugates 3,5, and 6 act as good drug candidates that can be used to modify new hits.

Free Radical-Mediated Grafting of Natural Polysaccharides Such as Chitosan, Starch, Inulin, and Pectin with Some Polyphenols: Synthesis, Structural Characterization, Bioactivities, and Applications-A Review

Polyphenols and polysaccharides are very important natural products with special physicochemical properties and extensive biological activities. Recently, polyphenol-polysaccharide conjugates have been synthesized to overcome the limitations of polysaccharides and broaden their application range. Grafted copolymers are produced through chemical coupling, enzyme-mediated, and free radical-mediated methods, among which the free radical-induced grafting reaction is the most cost-effective, ecofriendly, safe, and plausible approach. Here, we review the grafting reactions of polysaccharides mediated by free radicals with various bioactive polyphenols, such as gallic acid (GA), ferulic acid (FA), and catechins. A detailed introduction of the methods and their mechanisms for free radical-mediated grafting is given. Structural characterization methods of the graft products, including thin-layer chromatography (TLC), ultraviolet-visible (UV-vis) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) analysis, and X-ray diffraction (XRD) are introduced. Furthermore, the biological properties of polyphenol-polysaccharide conjugates are also presented, including antioxidant, antibacterial, antidiabetic, and neuroprotection activities, etc. Moreover, the potential applications of polyphenol-polysaccharide conjugates are described. Finally, the challenges and research prospects of graft products are summarized.

Preparation and physicochemical properties characterization of hesperetin-grafted pectin conjugate

Different ratios of hesperetin (HT) were successfully grafted onto pectin from basic water (PB) molecules via free radical-induced reaction. The structure of PB-HT conjugates was characterized by ultraviolet spectroscopy, infrared spectroscopy, X-ray diffraction and scanning electron microscopy. Results indicated that HT was successfully grafted onto pectin molecules, and PB-HT-0.5 showed the highest HT content (103.18 ± 2.76 mg/g). Thermogravimetric analysis indicated that HT crystals showed good thermal resistance and could improve the thermal stability of PB-HT conjugates. Additionally, PB-HT conjugates showed good cytocompatibility and blood compatibility. This study provides a novel and efficient method to synthesize hesperetin-grafted pectin conjugate, which showed potential application in the fields of functional foods in the future.

Polyphenol-Dietary Fiber Conjugates from Fruits and Vegetables: Nature and Biological Fate in a Food and Nutrition Perspective

In the past few years, numerous studies have investigated the correlation between polyphenol intake and the prevention of several chronic diseases. Research regarding the global biological fate and bioactivity has been directed to extractable polyphenols that can be found in aqueous-organic extracts, obtained from plant-derived foods. Nevertheless, significant amounts of non-extractable polyphenols, closely associated with the plant cell wall matrix (namely with dietary fibers), are also delivered during digestion, although they are ignored in biological, nutritional, and epidemiological studies. These conjugates have gained the spotlight because they may exert their bioactivities for much longer than extractable polyphenols. Additionally, from a technological food perspective, polyphenols combined with dietary fibers have become increasingly interesting as they could be useful for the food industry to enhance technological functionalities. Non-extractable polyphenols include low molecular weight compounds such as phenolic acids and high molecular weight polymeric compounds such as proanthocyanidins and hydrolysable tannins. Studies concerning these conjugates are scarce, and usually refer to the compositional analysis of individual components rather than to the whole fraction. In this context, the knowledge and exploitation of non-extractable polyphenol-dietary fiber conjugates will be the focus of this review, aiming to access their potential nutritional and biological effect, together with their functional properties.

Ultrasonication significantly enhances grafting efficiency of chitosan-ferulic acid conjugate and improves its film properties under Fenton system

Ultrasonication (US)-assisted Fenton-system (US-Fenton) with different US time was developed for synthesizing chitosan (CS)-ferulic acid (FA) conjugates. The optimal US-Fenton for a suitable time was selected for preparing a film with CS-FA conjugate and its structural, functional, rheological, and physical properties were also investigated. Compared with Fenton-system, US-Fenton enhanced the grafting ratio of the conjugates, which increased firstly and then decreased as US time. The conjugate obtained by US-Fenton for 1 min (FUS1) possessed the highest grafting ratio (121.28 mg FA/g) and its grafting time was also shortened from 12 h to 1 min contrasted with Fenton grafted method. Structural characterization results showed that FA was conjugated on CS via ester and amide bonds with decreased crystallinity. Scanning electron microscopy and molecular weight analysis indicated that the degradation degree of CS-FA conjugates increased with US time. The DPPH and ABTS radical-scavenging activities of FUS1 were the closest to ascorbic acid, and it also showed the best antibacterial effect among the test conjugates. Accordingly, FUS1 was selected to obtain the film for contrasting with CS film. FUS1 film solution exhibited a decreased viscosity. In comparison to CS film, UV transmittance of FUS1 film approached zero, and its moisture, oxygen, and carbon dioxide permeabilities significantly decreased (P < 0.05). Moreover, its water solubility and tensile strength increased by 58.09% and 25.72% than those of CS film, respectively. Therefore, US-Fenton for 1 min could be a promising method for efficiently preparing active food package materials and FUS1 film possessed broad application prospects.

Constructing Selenium Nanoparticles with Enhanced Storage Stability and Antioxidant Activities via Conformational Transition of Curdlan

Selenium nanoparticles (SeNPs) are among the emerging selenium supplements because of their high bioactivity and low toxicity. However, bare SeNPs are prone to activity loss caused by aggregation and sedimentation. This study aims to stabilize SeNPs with curdlan (CUR), a polysaccharide, to maintain or even enhance their biological activity. Herein, the stable SeNPs were constructed via the unique conformational transition of CUR induced by alkali-neutralization (AN) pretreatment. The physicochemical properties and structures of the prepared SeNPs were characterized by dynamic light scattering (DLS), UV-visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and free-radical-scavenging activity assays. The results show that most SeNPs are stabilized within the triple helix of CUR that has been pretreated with high-intensity AN treatment. These amorphous, small-sized (average size was 53.6 ± 17.7 nm), and stabilized SeNPs have significantly enhanced free-radical-scavenging ability compared to the control and can be well-stabilized for at least 240 days at 4 °C. This work indicates that CUR, as a food additive, can be used to well-stabilize SeNPs by AN pretreatment and provides a facile method to prepare and enhance the stability and bioactivity of SeNPs via triple-helix conformational transition.

A study on the uptake of methylene blue by biodegradable and eco-friendly carboxylated starch grafted polyvinyl pyrrolidone

This study is based on the removal of methylene blue (MB) from aqueous solution by cost effective and biodegradable adsorbent carboxymethyl starch grafted polyvinyl pyrolidone (Car-St-g-PVP). The Car-St-g-PVP was synthesized by grafting vinyl pyrolidone onto carboxymethyl starch by free radical polymerization reaction. The structure and different properties of Car-St-g-PVP were determined by ¹H NMR, FT-IR, XRD, TGA and SEM. A series of batch experiments were conducted for the removal of MB, The adsorption affecting factors such as temperature, contact time, initial concentration of MB dye, dose of Car-St-g-PVP and pH were studied in detail. The other parameters like the thermodynamic study, kinetics and isothermal models were fitted to the experimental data. The results showed that pseudo 2^nd order kinetics and Langmuir's adsorption isotherms were best fitted to experimental data with regression coefficient R² viz. 0.99 and 0.97. The kinetic study showed that the adsorption mechanism favored chemisorption. The Gibbs free energy (ΔG°) for the adsorption process was found to be -7.31 kJ/mol, -8.23 kJ/mol, -9.00 kJ/mol and -10.10 kJ/mol at 25 °C, 35 °C, 45 °C and 55 °C respectively. The negative values of ΔG° suggested the spontaneous nature of the adsorption process. Similarly, the positive values of entropy (ΔS°) and enthalpy (ΔH°) 91.27 J/k.mol and 19.90 kJ/mol showed the increasing randomness and endothermic nature of the adsorption process. The value of separation factor (R_L) was found to be less than one (RL < 1), which supported the feasibility of the adsorption process. The maximum MB removal percentage (% R) was found to be 98.6%. So, these findings show that Car-St-g-PVP can be meritoriously used for the treatment of MB from wastewater.

Fabrication and Characterization of the Egg-White Protein Chitosan Double-Layer Emulsion

Egg-white protein has an abundance of hydrophobic amino acids and could be a potential emulsifier after modification. Here, egg-white protein was modified via ultrasonic and transglutaminase treatments to destroy the globular structure. The egg-white protein gel particles (EWP-GPs) were prepared and then a novel highly stable EWP-chitosan double-layer emulsion was constructed. When ultrasonic treatment was applied at 240 W and TGase (20 U/g EWP) treatment, the EWP-GPs had a low particle size and good emulsification performance. The particle size of EWP-GPs was a minimum of 287 nm, and the polymer dispersity index (PDI) was 0.41. The three-phase contact angle (θ_o/w) of EWP-GPs was 79.6° (lower than 90°), performing with good wettability. Based on these results, the EWP-chitosan double-layer emulsion was prepared through the EWP-GPs being treated with 240 W ultrasound, TGase, and chitosan in this study. When the double-layer emulsion had 0.6% (v/v) chitosan, the zeta potential of the double-layer emulsion was -1.1 mV and the double-layer emulsion had a small particle size (56.87 µm). The creaming index of double-layer emulsion at 0.6% (v/v) chitosan was 16.3% and the droplets were dispersed uniformly. According to the rheological results, the storage modulus (G') was larger than the loss modulus (G″) in the whole frequency, indicating the formation of an elastic gel network structure in the emulsion. It is hoped to develop a novel food-grade stabilizer and a stable double-layer emulsion, providing new environment-friendly processing in hen egg products and delivery systems.

Ferulic acid- and gallic ester-acylated pectin: Preparation and characterization

In this study, pectin was modified with ferulic acid (Fa), trans-ferulic acid (trans-Fa), methyl gallate (MG), and ethyl gallate (EG) via the enzymatic method using aqueous/organic phases to enhance its physiochemical and bio-active properties. Results revealed that lipase might catalyze the hydrolysis of the ester bond within pectin in aqueous phase and prompt the transesterification between the hydroxyl group in the para position in Fa/trans-Fa or the 2'-OH group of MG/EG and the carboxylic group of pectin in the organic phase. The graft ratio was 21.00%, 21.67%, 13.24%, and 11.93% for the Fa-, trans-Fa-, MG-, and EG-modified pectin, respectively. In addition, compared with native pectin, the modified pectin exhibited improved apparent viscosity and emulsion activity. Moreover, the clearance of 1,1-diphenyl-2-picryl hydrazine (DPPH) and 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) was effectively enhanced for the modified pectin. Furthermore, the modified pectin exhibited strong antibacterial activity against Escherichia coli and Staphylococcus aureus while no cytotoxic effects based on the results of cell culture experiments. Our results provide a theoretical basis for the expansion of pectin applications in the food and pharmaceutical industries.

Naturally-Sourced Antibacterial Polymeric Nanomaterials with Special Reference to Modified Polymer Variants

Despite the recent advancements in treating bacterial infections, antibiotic resistance (AR) is still an emerging issue. However, polymeric nanocarriers have offered unconventional solutions owing to their capability of exposing more functional groups, high encapsulation efficiency (EE) and having sustained delivery. Natural polymeric nanomaterials (NMs) are contemplated one of the most powerful strategies in drug delivery (DD) in terms of their safety, biodegradability with almost no side effects. Every nanostructure is tailored to enhance the system functionality. For example, cost-effective copper NPs could be generated in situ in cellulose sheets, demonstrating powerful antibacterial prospects for food safety sector. Dendrimers also have the capacity for peptide encapsulation, protecting them from proteolytic digestion for prolonged half life span. On the other hand, the demerits of naturally sourced polymers still stand against their capacities in DD. Hence, Post-synthetic modification of natural polymers could play a provital role in yielding new hybrids while retaining their biodegradability, which could be suitable for building novel super structures for DD platforms. This is the first review presenting the contribution of natural polymers in the fabrication of eight polymeric NMs including particulate nanodelivery and nanofabrics with antibacterial and antibiofilm prospects, referring to modified polymer derivatives to explore their full potential for obtaining sustainable DD products.

Preparation and characterization of feruloylated oat β-glucan with antioxidant activity and colon-targeted delivery

Ferulic acid (FA) is an effective chemopreventive and therapeutic agent for colorectal cancer. However, FA cannot stably reach the colon through human digestive system, and it can be grafted into oligosaccharides to improve its digestion stability. Therefore, in this study, different degrees of substitution of feruloylated oat β-glucan (FA-OβG) were prepared by grafting FA onto water soluble oat β-glucan. FA grafting changed the crystallinity and surface morphology of OβG, and the thermal stability of the FA-OβG improved. As the DS increased, the antioxidant activity of FA-OβG increased, and FA-OβG III with DS of 0.184 showed the same antioxidant activities compared to the equal amount of free FA. The FA-OβG showed higher stability under gastrointestinal and colonic conditions than free FA. Furthermore, the FA-OβG conjugates exhibited good in vitro anticancer activity against human colorectal cancer cells, while FA-OβG III showed better anticancer activity than an equal amount of free FA.

Kinetic Study of Encapsulated β-Carotene Degradation in Aqueous Environments: A Review

The provitamin A activity of β-carotene is of primary interest to address one of the world's major malnutrition concerns. β carotene is a fat-soluble compound and its bioavailability from natural sources is very poor. Hence, studies have been focused on the development of specific core/shell micro- or nano-structures that encapsulate β-carotene in order to allow its dispersion in liquid systems and improve its bioavailability. One key objective when developing these structures is also to accomplish β-carotene stability. The aim of this review is to collect kinetic data (rate constants, activation energy) on the degradation of encapsulated β-carotene in order to derive knowledge on the possibility for these systems to be scaled-up to the industrial production of functional foods. Results showed that most of the nano- and micro-structures designed for β-carotene encapsulation and dispersion in the water phase provide better protection with respect to a natural matrix, such as carrot juice, increasing the β-carotene half-life from about 30 d to more than 100 d at room temperature. One promising approach to increase β-carotene stability was found to be the use of wall material, surfactants, or co-encapsulated compounds with antioxidant activity. Moreover, a successful approach was the design of structures, where the core is partially or fully solidified; alternatively, either the core or the interface or the outer phase are gelled. The data collected could serve as a basis for the rational design of structures for β-carotene encapsulation, where new ingredients, especially the extraordinary natural array of hydrocolloids, are applied.

Polyphenol-Polysaccharide Complex: Preparation, Characterization and Potential Utilization in Food and Health

Polysaccharides and polyphenols coexist in many plant-based food products. Polyphenol-polysaccharide interactions may affect the physicochemical, functional, and physiological properties, such as digestibility, bioavailability, and stability, of plant-based foods. In this review, the interactions (physically or covalently linked) between the selected polysaccharides and polyphenols are summarized. The preparation and structural characterization of the polyphenol-polysaccharide conjugates, their structural-interaction relationships, and the effects of the interactions on functional and physiological properties of the polyphenol and polysaccharide molecules are reviewed. Moreover, potential applications of polyphenol-polysaccharide conjugates are discussed. This review aids in a comprehensive understanding of the synthetic strategy, beneficial bioactivity, and potential application of polyphenol-polysaccharide complexes. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

A review presenting production, characterization, and applications of biopolymer curdlan in food and pharmaceutical sectors

Curdlan is an exopolysaccharide, specifically a homopolysaccharide, with a high molecular weight that is made up entirely of monomeric glucose molecules connected by β-1,3-glycosidic bonds. Curdlan was first isolated in 1962 by Harada and his colleagues from Alcaligenes faecalis var myxogenes 10C3. Microbial synthesis of this curdlan is mainly associated with soil bacteria. Preliminary screening of curdlan-producing microorganisms is done on aniline blue media. The aniline blue positive microorganisms are subjected to submerged fermentation for the production of curdlan. To improve the yield of curdlan produced, various optimization techniques are employed such as Plackett–Burman, response surface methodology, and others. Curdlan can be characterized by its morphology, gel strength, its infrared, and magnetic resonances among many other characteristics. Due to its distinctive physicochemical and rheological properties, it has gained immense popularity in the food, biomedical, and pharmaceutical sectors. However, curdlan’s functionality can be improved by chemically modifying curdlan to obtain grafted curdlan, hydrogels, and nanocomposites which are discussed in detail herewith. Curdlan was authorized to be used in the food industry by the United States Food and Drug Administration in 1996 and also in 1989 in Taiwan, Japan, and Korea. Over the years, many patents using curdlan have also been filed from different parts of the world. This review provides information about its structure, biosynthesis, production strategies, optimization, characterization, applications, and patents.

Graphic abstract

Effect of four modification methods on adsorption capacities and in vitro hypoglycemic properties of millet bran dietary fibre

To improve the adsorption capacities and hypoglycemic properties of millet bran dietary fibre (MBDF), four methods including acrylate-grafting, carboxymethylation, heat assisted with cellulase hydrolysis, and enzymatic hydrolysis combined with acrylate-grafting were used. The results demonstrated that all carboxymethylation, acrylate-grafting, and enzymatic hydrolysis combined with acrylate-grafting improved soluble dietary fibre content, water swelling ability and α-amylase-inhibition activity of MBDF. They also increased oil, cholesterol, sodium cholate, copper ion and nitrite ion adsorption capacities of MBDF. But carboxymethylation, acrylate-grafting and enzymatic hydrolysis combined with acrylate-grafting decreased polyphenol content, glucose-binding ability and glucose dialysis retardation index of MBDF (p < 0.05). The heat assisted with cellulase hydrolysis increased soluble dietary fibre content, polyphenol content, sodium cholate-adsorption capacity, and hypoglycemic properties of MBDF including glucose-binding ability, glucose dialysis retardation index and α-amylase-inhibition activity; but reduced adsorption capacity of MBDF on cholesterol and copper ion (p < 0.05). Changes in structure of MBDF caused by these modification methods were proved by the results of scanning electron microscopy and Fourier-transformed infrared spectroscopy analysis. These results highlight potential applications of these modified MBDFs as ingredients of hypolipidemic and hypoglycemic foods, or scavenger of nitrite and copper ion.

Effect of ultrasonic pretreatment monitored by real-time online technologies on dried preparation time and yield during extraction process of okra pectin

BACKGROUND

Ultrasonic pretreatment is a novel physical method that can be used in the extraction process of okra pectin. Real-time online monitoring technologies were introduced in time and frequency domains when okra was pretreated. Preparation time of dried okra and yield of okra pectin were studied; and physicochemical properties of okra pectin were analyzed at the optimum ultrasonic parameter.

RESULTS

Results showed that ultrasonic intensity of sweeping-frequency ultrasonic (SFU) pretreatment was stronger than that of fixed-frequency ultrasonic pretreatment (FFU). SFU pretreatment (60 ± 1 kHz) at 30 min had a strong ultrasonic voltage peak of 0.05387 V and signal power peak of -6.62 dBm. The preparation time of dried okra was 160 ± 14.14 min in the pretreated group, 44.83% lower than control without SFU pretreatment. The intercellular space was 56.03% higher than control. Water diffusion coefficient increased from 1.41 × 10^-9 to 2.14 × 10^-9  m²  s^-1 . Monobasic quadratic equations were developed for the monitored ultrasonic intensity and pectin yield. Compared to control, extraction yield (16.70%), pectin content (0.564 mg mg^-1 ), solubility (0.8187 g g^-1 ) and gel strength (30.91 g) were improved in the pretreated group. Viscosity decreased, and values of G' and G″ crossing at 63 rad s^-1 revealed the viscoelastic behavior and the beginning of viscous behavior with a sol state.

CONCLUSION

Decrement of dried preparation time and increment of yield were achieved by ultrasonic pretreatment during the extraction process of okra pectin, and the relationship of ultrasonic intensity monitored by real-time online technologies and yield was given. © 2021 Society of Chemical Industry.

Therapeutic and Industrial Applications of Curdlan With Overview on Its Recent Patents

Curdlan is an exopolysaccharide, which is composed of glucose linked with β-(1,3)-glycosidic bond and is produced by bacteria, such as Alcaligenes spp., Agrobacterium spp., Paenibacillus spp., Rhizobium spp., Saccharomyces cerevisiae, Candida spp., and fungal sources like Aureobasidium pullulan, Poria cocos, etc. Curdlan has been utilized in the food and pharmaceutical industries for its prebiotic, viscosifying, and water-holding properties for decades. Recently, the usefulness of curdlan has been further explored by the pharmaceutical industry for its potential therapeutic applications. Curdlan has exhibited immunoregulatory and antitumor activity in preclinical settings. It was observed that curdlan can prevent the proliferation of malarial merozoites in vivo; therefore, it may be considered as a promising therapy for the treatment of end-stage malaria. In addition, curdlan has demonstrated potent antiviral effects against human immunodeficiency virus (HIV) and Aedes aegypti virus. It has been suggested that the virucidal properties of curdlans should be extended further for other deadly viruses, such as severe acute respiratory syndrome (SARS), Middle East respiratory syndrome (MERS), and the current severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2/COVID-19). The prebiotic property of curdlan would confer beneficial effects on the host by promoting the growth of healthy microbiota in the gut and consequently help to reduce gastrointestinal disorders. Therefore, curdlan can be employed in the manufacture of prebiotics for the management of various gastrointestinal dysbiosis problems. Studies on the mechanism of action of curdlan-induced suppression in microbial and tumor cells at the cellular and molecular levels would not only enhance our understanding regarding the therapeutic effectiveness of curdlan but also help in the discovery of new drugs and dietary supplements. The primary focus of this review is to highlight the therapeutic interventions of curdlan as an anticancer, anti-malaria, antiviral, and antibacterial agent in humans. In addition, our review provides the latest information about the chemistry and biosynthesis of curdlan and its applications for making novel dairy products, functional foods, and nutraceuticals and also details about the recent patents of curdlan and its derivatives.

Recent advances in the production of biomedical systems based on polyhydroxyalkanoates and exopolysaccharides

In recent years, growing attention has been devoted to naturally occurring biological macromolecules and their ensuing application in agriculture, cosmetics, food and pharmaceutical industries. They inherently have antigenicity, low immunogenicity, excellent biocompatibility and cytocompatibility, which are ideal properties for the design of biomedical devices, especially for the controlled delivery of active ingredients in the most diverse contexts. Furthermore, these properties can be modulated by chemical modification via the incorporation of other (macro)molecules in a random or controlled way, aiming at improving their functionality for each specific application. Among the wide variety of natural polymers, microbial polyhydroxyalkanoates (PHAs) and exopolysaccharides (EPS) are often considered for the development of original biomaterials due to their unique physicochemical and biological features. Here, we aim to fullfil a gap on the present associated literature, bringing an up-to-date overview of ongoing research strategies that make use of PHAs (poly (3-hydroxybutyrate), poly (3-hydroxybutyrate-co-3-hydroxyvalerate), poly (3-hydroxyoctanoate), poly(3-hydroxypropionate), poly (3-hydroxyhexanoate-co-3-hydroxyoctanoate), and poly (3-hydroxybutyrate-co-3-hydroxyhexanoate)) and EPS (bacterial cellulose, alginates, curdlan, pullulan, xanthan gum, dextran, hyaluronan, and schizophyllan) as sources of interesting and versatile biomaterials. For the first time, a monograph addressing the properties, pros and cons, status, challenges, and recent progresses regarding the application of these two important classes of biopolymers in biomedicine is presented.

Catechin-grafted arabinoxylan conjugate: Preparation, structural characterization and property investigation

In this study, a high molecular weight arabinoxylan (AX, Mw: 694 kDa) from wheat bran was alkaline extracted and covalently linked with Catechin (CA) by free radical catalytic reaction. Comparing to AX, arabinoxylan-catechin (AX-CA) conjugates demonstrated an extra UV-vis absorption peak at 274 nm, a new FT-IR absorption band at 1516 cm^-1 and new proton signals at 6.5-7.5 ppm, which all confirmed the covalently linked structure. Grafting CA onto AX not only decreased the molecular weight, thermal stability and apparent viscosity of AX, but also enhanced its inhibition effects on starch digestibility in vitro. The in vitro fermentation test with pig feces showed that the degradation & utilization rate of AX, the total short-chain fatty acid (SCFA) and acetic acid levels produced all were significantly delayed after grafting. This study provided a novel approach to synthesize AX-CA conjugates that could be a novel dietary fiber of enhanced functional/bioactive properties using in the fields of functional foods and medicine.

Construction and characterization of antioxidative ferulic acid-grafted carboxylic curdlan conjugates and their contributions on β-carotene storage stability

Grafting copolymerization of phenolic acids onto polysaccharides is an important strategy to improve their biological activities. In this study, ferulic acid (FA)-grafted carboxylic curdlan conjugates, namely, Cur-8-g-FA, Cur-24-g-FA, and Cur-48-g-FA, were synthesized by free radical-induced grafting. Results showed that FA was covalently grafted onto carboxylic curdlans via ester bonds. The grafting ratios of Cur-8-g-FA, Cur-24-g-FA, and Cur-48-g-FA were 223.03 ± 12.63, 115.63 ± 5.96, and 152.30 ± 4.57 mg FA/g, respectively, which were related with the carboxylate contents, molecular weights, and chain conformations of carboxylic curdlans. Compared with carboxylic curdlans, the FA-grafted carboxylic curdlan conjugates had lower thermal stability, molecular weight, and rheological property and looser surface morphology but had more prominent antioxidant benefits in vitro, which were proportional to their grafting ratios. Moreover, good storage stability against chemical degradation was exhibited by the β-carotene in Pickering emulsions stabilized by Cur-8-g-FA with a high grafting ratio and molecular weight.

Effect of multi-frequency ultrasound thawing on the structure and rheological properties of myofibrillar proteins from small yellow croaker

The influence of multi-frequency combined ultrasound thawing on primary, secondary, and tertiary structures, electrophoresis pattern, particle size distribution, zeta potential values, thermal stability, rheological behavior, and microstructure of small yellow croaker myofibrillar proteins (MPs) were studied. Four treatments were used for thawing small yellow croakers: flow water thawing (FWT), mono-frequency ultrasonic thawing (MUT), dual-frequency ultrasonic thawing (DUT), and tri-frequency ultrasonic thawing (TUT). Compared with fresh samples (FS), the MPs of the sample pretreated by DUT had non-significant effect on protein primary (including free amino groups and surface hydrophobicity), secondary, tertiary structures, electrophoresis pattern, and microstructure. MPs pretreated by DUT had less aggregation and degradation. Besides, DUT treatment increased the thermal stability of MPs. The ultrasound had significant effects on the rheological properties of MPs. Overall, DUT effectively minimized the changes in MPs structure and protected the protein thermal stability and rheological behavior during the thawing process.

Emulsifying properties of a ferulic acid-grafted curdlan conjugate and its contribution to the chemical stability of β-carotene

A biopolymer-polyphenol conjugate-stabilized oil-in-water emulsion system was established to improve the chemical stability and bioaccessibility of β-carotene (BC). In this study, the emulsifying properties and contribution of a ferulic acid-grafted curdlan conjugate (Cur-D-g-FA) to the chemical stability of BC were investigated. Results showed that the emulsification ability of emulsions stabilized by Cur-D-g-FA remarkably increased with an increasing concentration from 0.05% to 0.8% (w/v) along with decreasing average droplet sizes, negatively charged zeta potentials, and uniform size distributions. The emulsions stabilized by 0.8% Cur-D-g-FA exhibited pronounced shear thinning and solid-like elastic properties as well as satisfactory oxidation stability. The emulsions stabilized by 0.8% Cur-D-g-FA had excellent ability to improve the chemical stability of BC when exposed to different environmental stresses and resulted in the favorable bioaccessibility of BC in vitro. The results prove that Cur-D-g-FA as a promising stabilizer has great potential to protect liposoluble nutrients in food-grade emulsion-delivery systems.

Development of antibacterial nanoemulsions incorporating thyme oil: Layer-by-layer self-assembly of whey protein isolate and chitosan hydrochloride

The aim of this study was to develop a thyme oil emulsion with good physicochemical properties and antibacterial activity. Initially, oil-in-water emulsions containing whey protein-coated essential oil droplets were prepared by high-pressure homogenization. The double-layer emulsions were formed around the oil droplets by electrostatic deposition of cationic chitosan hydrochloride onto the anionic protein-coated droplets. Then, the structure, physicochemical properties, and storage stability of the emulsions were determined. Emulsions formulated using 1% v/v thyme oil, 0.7 wt% whey protein, and 0.25 wt% of chitosan hydrochloride contained relatively small cationic droplets. Moreover, the emulsions containing double-layer coatings were shear-thinning fluids. Storage tests indicated that double-layer emulsions had better stability than the single-layer. Antibacterial tests indicated that the double-layer emulsions exhibited prolonged antibacterial activity against two model food pathogens: E. coli and S. aureus. These results provide a scientific basis for the rational design of antimicrobial delivery systems for use in foods.

Effects of carboxymethylation, hydroxypropylation and dual enzyme hydrolysis combination with heating on physicochemical and functional properties and antioxidant activity of coconut cake dietary fibre

The effects of carboxymethylation, hydroxypropylation and dual enzyme hydrolysis combined with heating on some physicochemical and functional properties, and antioxidant activity of coconut cake dietary fibre (CCDF) were studied. Results showed that both the hydroxypropylation and carboxymethylation could effectively improve (p < 0.05) the water retention capacity (WRC), oil retention capacity (ORC), viscosity, α-amylase inhibition activity (α-AAIR), glucose dialysis retardation index (GDRI), cation-exchange capacity, emulsifying capacity index (ECI) and bile adsorption capacity (BAC) of CCDF. Moreover, the cellulase and hemicellulase hydrolysis combination with heating significantly enhanced (p < 0.05) the soluble dietary fibre content, WRC, emulsion stability, GDRI, α-AAIR and BAC of CCDF; but caused decrease in ORC and browning of color. In addition, improvement of total phenol content, Fe²⁺ chelating ability, ABTS⁺· and O₂^-· scavenging activity were obtained in carboxymethylaticted CCDF. These effects were mainly attributed to the composition and structural modifications as evident from SEM, FT-IR and XRD analysis.

Chemistry and microbial sources of curdlan with potential application and safety regulations as prebiotic in food and health

Curdlan - a homopolysaccharide is comprised of glucose using β-1,3-glycosidic bond and produced by different types of microorganisms as exopolysaccharide. Curdlan gel is stable during freezing and thawing processes which find several applications in food and pharmaceutical industries. It acts as a prebiotic, stabilizer and water-holding, viscosifying and texturing agent. Additionally, curdlan gel is used as a food factor to develop the new products e.g. milk fat substitute, non-fat whipped cream, retorting (freeze-drying) process of Tofu, low-fat sausage, and low-fat hamburger. However, a great variation exists among different countries regarding the regulatory aspects of curdlan as food additives, dietary components or prebiotic substances. Therefore, the present review paper aims to discuss safety issues and the establishment of common guidelines and legislation globally, focusing on the use the applications of curdlan in the food sector including the development of noodles, meat-based products, and fat-free dairy products. This review analyzes and describes in detail the potential of curdlan as a sustainable alternative additive in health and food industries, emphasizing on the chemical composition, production, properties, and potential applications.