5-Hydroxymethylfurfural accumulation plays a critical role on acrylamide formation in coffee during roasting as confirmed by multiresponse kinetic modelling

Estimation of Dietary Acrylamide Exposure of Ethiopian Population Through Coffee Consumption

This study estimated the acrylamide exposure of the Ethiopian population through traditional brewing of Coffee arabica. Acrylamide concentrations in traditionally processed Ethiopian C. arabica varieties from Jimma, Sidama, Yirgacheffe, Nekemte, and Hararge were measured. A qualitative survey in Addis Ababa was used to develop a traditional coffee brewing flowchart, which was then applied in a laboratory setting. Acrylamide concentrations in roasted coffee powders were found to be 944.01, 861.67, 739.63, 726.35, and 326.60 μg/kg for Hararge, Nekemte, Jimma, Yirgacheffe, and Sidama, respectively. First brew concentrations were 119.97, 112.10, 108.68, 94.07, and 6.67 μg/L, and second brew concentrations were 21.41, 16.45, 16.77, 3.92, and 6.31 μg/L for the respective varieties of Nekemte, Yirgachefe, Jimma, Hararge, and Sidama. Estimated daily intake (EDI) of acrylamide, based on coffee consumption data, were well below harmful levels (<200 μg/kg bw/day), with Target Hazard Quotient (THQ) values indicating minimal noncarcinogenic risk (<1). The study also found low concern for nonneoplastic effects (intake < 0.2 μg/kg bw/day) from Sidama and Nekemte coffees, although a relatively higher concern was observed for Nekemte in specific areas. The findings suggest that reducing acrylamide content in coffee through preventive actions and mitigation strategies is advisable to minimize potential health risks.

The neurotoxicity of acrylamide in ultra-processed foods: interventions of polysaccharides through the microbiota-gut-brain axis

Ultra-processed foods (UPFs) have become popular in recent years, however, the detrimental effects of their excessive consumption have also become evident. Acrylamide (AA), a processing hazard present in UPFs, can further aggravate the harmful effects of UPFs. AA can cause significant damage to both the intestinal barrier and gut microbiota, thereby affecting the nervous system through the microbiota-gut-brain (MGB) axis. Natural polysaccharides have demonstrated the capacity to significantly alleviate the oxidative stress and inflammatory response associated with AA exposure. In addition, they exhibit neuroprotective properties that may be mediated through the MGB axis. This paper reviews literature on the presence of AA in certain UPFs and its potential to inflict serious harm on the human gut microbiota and brain. Moreover, the possibility of utilizing polysaccharides as a preventative measure against AA-induced neurotoxicity was also proposed. These findings provide new insights into the safety risks associated with the overconsumption of UPFs and highlight the potential of polysaccharides to counteract the neurodegeneration induced by AA.

Comparison of characterization and composition of melanoidins from three different dried apple slices

The composition of melanoidins in dried apple that affects quality remains unclear. The composition and structure of melanoidins in dried apple slices by hot air drying (HAAM), instant controlled pressure drop drying (DICAM), and vacuum freeze-drying (FDAM) were investigated. It showed that the melanoidins were highly heterogeneous mixtures with a light-yellow color and blue-green fluorescence, belonging to polysaccharide-type melanoidins. Specifically, HAAM had a large molecular weight (929.5 g/mol) and wide molecular weight distribution, with more double-bond conjugated systems. DICAM (610.9 g/mol), possessing the strongest fluorescence intensity, was mainly composed of compounds with fewer π-conjugated structures and more electron-donating groups. As a control, the low level of Maillard reaction in FDAM resulted in the formation of the smallest molecular weight (458.6 g/mol) with weak fluorescence intensity. Moreover, 10 compounds were tentatively identified in apple melanoidins. This study provides the foundation for the future functional preparation of apple melanoidins.

Role of galacturonic acid in acrylamide formation: Insights from structural analysis

Acrylamide (AA) is a neoformed compound in heated foods, mainly produced between asparagine (Asn) and glucose (Glc) during the Maillard reaction. Galacturonic acid (GalA), the major component of pectin, exhibits high activity in AA formation. This study investigated the pathway for AA formation between GalA and Asn. Three possible pathways were proposed: 1) The carbonyl group of GalA directly interacts with Asn to produce AA; 2) GalA undergoes an oxidative cleavage reaction to release α-dicarbonyl compounds, which subsequently leads to AA production; 3) 5-formyl-2-furancarboxylic acid, the thermal degradation product of GalA, reacts with Asn to generate AA. Structural analysis revealed that the COOH group in GalA accelerated intramolecular protonation and electron transfer processes, thereby increasing the formation of AA precursors such as decarboxylated Schiff base and α-dicarbonyl compounds, promoting AA formation. This study provides a theoretical basis and new insights into the formation and control of AA.

Assessment of Acrylamide Levels by Advanced Molecularly Imprinted Polymer-Imprinted Surface Plasmon Resonance (SPR) Sensor Technology and Sensory Quality in Homemade Fried Potatoes

This study evaluated acrylamide (AA) levels and various quality parameters in homemade fried potatoes prepared in different sizes by integrating principles from the Slow Food Movement with advanced sensor technology. To this aim, a surface plasmon resonance (SPR) sensor based on a molecularly imprinted polymer (MIP) was first developed for the determination of AA in homemade fried potatoes at low levels, and the AA levels in the samples were established. First of all, monolayer formation of allyl mercaptane on the SPR chip surface was carried out to form double bonds that could polymerize on the chip surface. AA-imprinted SPR chip surfaces modified with allyl mercaptane were prepared via UV polymerization using ethylene glycol dimethacrylate (EGDMA) as a cross-linker, N,N'-azobisisobutyronitrile (AIBN) as an initiator, and methacryloylamidoglutamicacid (MAGA) as a monomer. The prepared AA-imprinted and nonimprinted surfaces were characterized by atomic force microscopy (AFM) and Fourier transform infrared (FTIR) spectroscopy methods. The SPR sensor indicated linearity in the range of 1.0 × 10-9-5.0 × 10-8 M with a detection limit (LOD) of 3.0 × 10-10 M in homemade fried potatoes, and the SPR sensor demonstrated high selectivity and repeatability in terms of AA detection. Additionally, the highest AA level was observed in the potato sample belonging to the T1 group, at 15.37 nM (p < 0.05), and a strong and positive correlation was found between AA levels and sensory parameters, the a* value, the ΔE value, and the browning index (BI) (p < 0.05).

Insights into acrylamide and furanic compounds in coffee with a focus on roasting methods and additives

Roasting is necessary for bringing out the aroma and flavor of coffee beans, making coffee one of the most consumed beverages. However, this process also generates a series of toxic compounds, including acrylamide and furanic compounds (5-hydroxymethylfurfural, furan, 2-methylfuran, 3-methylfuran, 2,3-dimethylfuran, and 2,5-dimethylfuran). Furthermore, not much is known about the formation of these compounds in emerging coffee formulations containing alcohol and sugars. Therefore, this study investigated the effect of roasting time and degree on levels of acrylamide and furanic compounds in arabica coffee using fast and slow roasting methods. The fast and slow roasting methods took 5.62 min and 9.65 min, respectively, and reached a maximum of 210 °C to achieve a light roast. For the very dark roast, the coffee beans were roasted for 10.5 min and the maximum temperature reached 245 °C. Our findings showed that the levels of acrylamide (375 ± 2.52 μg kg-1) and 5-HMF (194 ± 11.7 mg kg-1) in the slow-roasted coffee were 35.0 % and 17.4 % lower than in fast-roasted coffee. Furthermore, light roast coffee had significantly lower concentrations of acrylamide and 5-HMF than very dark roast, with values of 93.7 ± 7.51 μg kg-1 and 21.3 ± 10.3 mg kg-1, respectively. However, the levels of furan and alkylfurans increased with increasing roasting time and degree. In this study, we also examined the concentrations of these pollutants in new coffee formulations consisting of alcohol-, sugar-, and honey-infused coffee beans. Formulations with honey and sugar resulted in higher concentrations of 5-HMF, but no clear trend was observed for acrylamide. On the other hand, formulations with honey had higher concentrations of furan and alkylfurans. These results indicate that optimizing roasting time and temperature might not achieve the simultaneous reduction of all the pollutants. Additionally, sugar- and honey-infused coffee beans are bound to have higher furanic compounds, posing a higher health risk.

The Influence of Maceration and Flavoring on the Composition and Health-Promoting Properties of Roasted Coffee

Over the years, many methods of refining green beans have been developed, including maceration aimed at enriching the coffee aroma and improving the overall quality. This study aimed to evaluate the influence of different methods of maceration (fruit and wine) and the addition of food flavors to coffee beans on antioxidant activity, caffeine, phenolic and organic acid content, as well as health-promoting properties. This research showed that the use of the maceration in melon and apple fruit pulp (100 g of fruit pulp per 100 g of green coffee, incubated for 24 h, coffee roasting at 230 °C, control trial roasted coffee) ensured the highest polyphenol (hydroxycinnamic acids and their esters-chlorogenic acids) content (in melon pulp-13.56 g/100 g d.b. (dry bean); in apple pulp-13.22 g/100 g d.b., p < 0.05 (one-way ANOVA)) and antioxidant activity. Melon (92.11%, IC50 = 3.80 mg/mL extract) and apple (84.55%, IC50 = 4.14 mg/mL) showed the highest α-amylase (enzyme concentration 10 μmol/mL) inhibition activity (0.5 mg/mL for both fruits). The addition of food flavors reduced the total content of chlorogenic acids to the range of 4.64 to 6.48 g/100 g d.b. and increased the content of acrylamide and 5-HMF, which positively correlated with a low antioxidant potential compared to the macerated samples and the control. Studies have shown that coffee macerated in the pulp of melon and apple fruit, due to its great potential to inhibit α-amylase in vivo, may have a preventive effect on type II diabetes. This study complements the current knowledge on the potential health-promoting properties of coffee flavored using different methods; further research should include more advanced models for testing these health-promoting properties. Statistical analysis was based on the determination of the average values of six measurements and their standard deviation, as well as on the one-way ANOVA (analysis of variation) and the Pearson correlation coefficient, using Statistic 10.0 software. The significance was defined at p ≤ 0.05.

Enhancing analysis of neo-formed contaminants in two relevant food global commodities: Coffee and cocoa

Neo-formed contaminants (NFCs) are common in many foods, especially those subjected to high-temperature processing. Among these contaminants, products arising from the Maillard reaction, sugar reduction, thermal degradation of polyphenols and lipid oxidation, including acrylamide, furan, furfuryl alcohol, and hydroxymethylfurfural, are consistently linked to potential neoplastic effects. NFCs are found in globally traded commodities like coffee and cocoa, posing a significant risk due to their frequent consumption by consumers. A direct correlation exists between consumption frequency, exposure levels, and health risks. Hence, it's crucial to establish reliable methods to determine levels in both matrices, aiming to mitigate their formation and minimise risks to consumers. This review offers a comprehensive examination, discussion, and identification of emerging trends and opportunities to enhance existing methodologies for extracting and quantifying NFCs in coffee and cocoa. By presenting an in-depth analysis of performance parameters, we aim to guide the selection of optimal extraction techniques for quantifying individual NFCs. Based on the reviewed data, headspace extraction is recommended for furan, while solid and dispersive solid phase extractions are preferred for acrylamide when quantified using gas and liquid chromatography, respectively. However, it is worth noting that the reported linearity tests for certain methods did not confirm the absence of matrix effects unless developed through standard addition, leading to uncertainties in the reported values. There is a need for further research to verify method parameters, especially for determining NFCs like furfuryl alcohol. Additionally, optimising extraction and separation methods is essential to ensure complete compound depletion from samples. Ideally, developed methods should offer comprehensive NFC determination, reduce analysis time and solvent use, and adhere to validation parameters. This review discusses current methods for extracting and quantifying NFCs in coffee and cocoa, highlighting emerging trends and emphasising the need to improve existing techniques, especially for compounds like furfuryl alcohol.

Traditional food processing and Acrylamide formation: A review

Tradition methods that are applied for the processing of food commonly use relatively high temperature and long cooking time for the preparation of foods. This relatively high temperature and long processing time of foods especially in the presence of carbohydrate is highly associated with the formation of acrylamide. Acrylamide is a process contaminant that is highly toxic to humans and remains as a global issue. The occurrence of acrylamide in traditional foods is a major public health problem. Studies that are conducted in different countries indicated that traditionally processed foods are highly linked to the formation of acrylamide. Therefore, understanding the factors influencing acrylamide formation during traditional food processing techniques is crucial for ensuring food safety and minimizing exposure to this harmful chemical compound. Several research reports indicate that proper food processing is the most effective solution to address food safety concerns by identifying foods susceptible to acrylamide formation. This review aims to provide an overview of traditional food processing techniques and their potential contribution to the formation acrylamide and highlight the importance of mitigating its formation in food products. The information obtained in this review may be of great value to future researchers, policymakers, society, and manufacturers.

Exploring correlations between soy sauce components and the formation of thermal contaminants during low-salt solid-state fermentation

Soy sauce is a traditional seasoning in Asia and provides a unique flavor to food. However, some harmful Maillard reaction products (MRPs) were inevitably formed during the manufacturing process. Fermentation is a critical step of soy sauce manufacturing and has a significant impact on MRPs formation. Therefore, this study investigated the formation of some characteristic MRPs (e.g., furan, carboxymethyl lysine (CML), 5-hydroxymethylfurfural (5-HMF), α-dicarbonyl compounds) and their correlation with major quality indicators (e.g., free amino acids, reducing sugar, total acid, ammonia nitrogen, total nitrogen, non-salt soluble solids) in low-salt solid-state fermentation soy sauce (LSFSS). The result showed that the levels of furan, CML, and 5-HMF continue to increase during the fermentation process, reaching a maximum after sterilization. Further testing using Person correlation showed that the formation of furan, CML, and 5-HMF in LSFSS was positively correlated with glucose, fructose, α-dicarbonyl compounds, and most of the amino acids, while it was negatively correlated with sucrose and methionine. Among them, the contribution of lysine, valine, isoleucine, leucine, and arginine to furan formation has rarely been reported. Our results provide a good theoretical basis for the control of MRPs during LSFSS fermentation.

Electronic Prediction of Chemical Contaminants in Aroma of Brewed Roasted Coffee and Quantification of Acrylamide Levels

The aim of this research was to apply an electronic device as indirect predictive technology to evaluate toxic chemical compounds in roasted espresso coffee. Fresh coffee beans were subjected to different thermal treatments and analyzed to determine volatile organic compounds, content of acrylamide and 5-hydroxymethylfurfural, sensory characteristics and electronic nose data. In total, 70 different volatile compounds were detected and grouped into 15 chemical families. The greatest percentage of these compounds were furans, pyrazines, pyridines and aldehydes. The positive aroma detected had the intensity of coffee odor and a roasted aroma, whereas the negative aroma was related to a burnt smell. A linear relationship between the toxic substances and the sensory defect was established. A high sensory defect implied a lower content of acrylamide and a higher content of 5-hydroxymethylfurfural. Finally, electronic signals were also correlated with the sensory defect. This relationship allowed us to predict the presence of these contaminants in the roasted coffee beverage with an indirect method by using this electronic device. Thus, this device may be useful to indirectly evaluate the chemical contaminants in coffee beverages according to their sensory characteristics.

Detection of the 5-hydroxymethylfurfural content in roasted coffee using machine learning based on near-infrared spectroscopy

Since 5-hydroxymethylfurfural (5-HMF) is carcinogenic to humans, its detection in foods is essential. This study performed near-infrared (NIR) spectroscopy (11998-4000 cm^-1) to determine the 5-HMF content in roasted coffee. The random forest (RF) was used to extract important wavenumbers, after which three machine learning models (ordinary least square (OLS), support vector machine (SVM), and RF) were established for the prediction. RF obtained the best prediction results (R_c² = 0.98 and R_p² = 0.92) compared with OLS and SVM and effectively extracted the important wavenumbers (11667 cm^-1, 11666 cm^-1, 10905 cm^-1, 7096 cm^-1, 7095 cm^-1, 7094 cm^-1, 7093 cm^-1, 7092 cm^-1, 5054 cm^-1, 5026 cm^-1, 5025 cm^-1, and 5024 cm^-1). The results demonstrated that machine learning models based on NIR spectroscopy could provide a non-destructive approach for determining 5-HMF content in roasted coffee.

Thermal Contaminants in Coffee Induced by Roasting: A Review

Roasting is responsible for imparting the main characteristics to coffee, but the high temperatures used in the process can lead to the formation of several potentially toxic substances. Among them, polycyclic aromatic hydrocarbons, acrylamide, furan and its derivative compounds, α-dicarbonyls and advanced glycation end products, 4-methylimidazole, and chloropropanols stand out. The objective of this review is to present a current and comprehensive overview of the chemical contaminants formed during coffee roasting, including a discussion of mitigation strategies reported in the literature to decrease the concentration of these toxicants. Although the formation of the contaminants occurs during the roasting step, knowledge of the coffee production chain as a whole is important to understand the main variables that will impact their concentrations in the different coffee products. The precursors and routes of formation are generally different for each contaminant, and the formed concentrations can be quite high for some substances. In addition, the study highlights several mitigation strategies related to decreasing the concentration of precursors, modifying process conditions and eliminating/degrading the formed contaminant. Many of these strategies show promising results, but there are still challenges to be overcome, since little information is available about advantages and disadvantages in relation to aspects such as costs, potential for application on an industrial scale and impacts on sensory properties.

Production and Inhibition of Acrylamide during Coffee Processing: A Literature Review

Coffee is the third-largest beverage with wide-scale production. It is consumed by a large number of people worldwide. However, acrylamide (AA) is produced during coffee processing, which seriously affects its quality and safety. Coffee beans are rich in asparagine and carbohydrates, which are precursors of the Maillard reaction and AA. AA produced during coffee processing increases the risk of damage to the nervous system, immune system, and genetic makeup of humans. Here, we briefly introduce the formation and harmful effects of AA during coffee processing, with a focus on the research progress of technologies to control or reduce AA generation at different processing stages. Our study aims to provide different strategies for inhibiting AA formation during coffee processing and investigate related inhibition mechanisms.

Exploring correlations between green coffee bean components and thermal contaminants in roasted coffee beans

This study evaluated chemical compositions of green coffee beans from multi-production regions and correlated this information with thermal contaminants in roasted coffee. Using multivariate statistical techniques, formation of 5-hydroxymethylfurfural (5-HMF), furan, 2- and 3-methylfuran were positively correlated with lipid, sucrose, glutamic acid, phenylalanine, margaric acid, linolenic acid and trigonelline in green coffee beans. Moreover, significant positive correlations between acrylamide (AA) levels with aspartic acid, serine, alanine, histidine, asparagine, protein, and caffeine was found in green beans. Despite this, 5-HMF, furan, 2- and 3-methylfuran showed negative correlations with active constitutes (neochlorogenic acid, cryptochlorogenic acid, caffeine, total phenolics (TPC) and total flavonoids contents (TFC)), and several amino acids, and there were slight negative relationships between AA and myristic acid, palmitic acid, chlorogenic acid, sucrose, lipid, TPC and TFC. This study provides valuable enlightenment for the selection of proper coffee beans for production of coffee with high nutrition and low chemical hazardous risks.

Anaerobic germination of green coffee beans: A novel strategy to improve the quality of commercial Arabica coffee

This study aimed to improve the brewing quality of commercial Arabica coffee through anaerobic germination. Changes in important compounds and cupping scores of germination roasting coffee with different germination degrees were investigated by 1H NMR, HS-SPME-GC-MS and sensory analysis. Statistical analysis of multivariate analysis results indicated that 6 water-soluble chemical components and 8 volatile chemical components have the potential to be markers of germinated roasting coffee. In addition, germination significantly reduced caffeine content and acrylamide formation in roasted coffee. Sensory analysis according to the Specialty Coffee Association (SCA) cupping protocol demonstrated that anaerobic germination modified flavor attributes, improved the quality, and increased sensory scores. Furthermore, anaerobic sprouting increased fruity descriptors, but over-sprouting did not improve overall attributes while producing both fermentative and vegetable descriptors. Therefore, suitable anaerobic germination of green coffee beans can be used as a new strategy to improve the flavor of commercial Arabica coffee.

Variations in volatile flavour compounds in Crataegi fructus roasting revealed by E-nose and HS-GC-MS

Introduction

Crataegi fructus (CF) is an edible and medicinal functional food used worldwide that enhances digestion if consumed in the roasted form. The odour of CF, as a measure of processing degree during roasting, significantly changes. However, the changes remain unclear, but are worth exploring.

Methods

Herein, the variations in volatile flavour compounds due to CF roasting were investigated using an electronic nose (E-nose) and headspace gas chromatography-mass spectrometry (HS-GC-MS).

Results

A total of 54 components were identified by GC-MS. Aldehydes, ketones, esters, and furans showed the most significant changes. The Maillard reaction, Strecker degradation, and fatty acid oxidation and degradation are the main reactions that occur during roasting. The results of grey relational analysis (GRA) showed that 25 volatile compounds were closely related to odour (r > 0.9). Finally, 9 volatile components [relative odour activity value, (ROAV) ≥ 1] were confirmed as key substances causing odour changes.

Discussion

This study not only achieves the objectification of odour evaluation during food processing, but also verifies the applicability and similarity of the E-nose and HS-GC-MS.

Occurrence of Furfural and Its Derivatives in Coffee Products in China and Estimation of Dietary Intake

This is the first report on the content of furfural and its derivatives in coffee products in China. The concentrations of furfural and its derivatives in 449 sampled, commercially available coffee products in China were analyzed through a GC-MS technique, and the associated health risks were estimated. As a result, 5-hydroxymethyl furfural (5-HMF) was identified as the predominant derivative compound, with the highest concentration of 6035.0 mg/kg and detection frequency of 98.7%. The mean dietary exposures of 5-HMF, 5-MF(5-methylfurfural), and 2-F(2-furfural) in coffee products among Chinese consumers were 55.65, 3.00, and 3.23 μg/kg bw/day, respectively. The ranges of mean dietary intake of furfural and its derivatives based on age groups were all lower than the acceptable daily intake (ADI) and the toxicological concern threshold (TTC). Risk evaluation results indicate that coffee product intake did not pose potential risks to consumers. Notably, the analysis revealed that children aged 3-6 years had the highest mean exposure due to their low body weight.

The role of additives on acrylamide formation in food products: a systematic review

Acrylamide (AA) is a toxic substance formed in many carbohydrate-rich food products, whose formation can be reduced by adding some additives. Furthermore, the type of food consumed determines the AA intake. According to the compiled information, the first route causing AA formation is the Maillard reaction. Some interventions, such as reducing AA precursors in raw materials, (i.e., asparagine), reducing sugars, or decreasing temperature and processing time can be applied to limit AA formation in food products. The L-asparaginase is more widely used in potato products. Also, coatings loaded with proteins, enzymes, and phenolic compounds are new techniques for reducing AA content. Enzymes have a reducing effect on AA formation by acting on asparagine; proteins by competing with amino acids to participate in Maillard, and phenolic compounds through their radical scavenging activity. On the other hand, some synthetic and natural additives increase the formation of AA. Due to the high exposure to AA and its toxic effects, it is essential to recognize suitable food additives to reduce the health risks for consumers. In this sense, this study focuses on different additives that are proven to be effective in the reduction or formation of AA in food products.

Exploring Acrylamide and 5-Hydroxymethylfurfural Formation in Glucose-Asparagine-Linoleic Acid System With a Kinetic Model Approach

In the “glucose-asparagine-linoleic acid” ternary system, a kinetic model approach was used to explore formation and elimination law of target hazards, including acrylamide (AA) and 5-hydroxymethylfurfural (5-HMF), and their related precursors and intermediate products. The results showed that the elimination of glucose and asparagine and the formation of fructose (generated from glucose isomerization), 3-deoxyglucosone (3-DG), methylglyoxal (MGO), and glyoxal (GO), AA and 5-HMF followed first-order reaction kinetics with high fit coefficients (R² > 0.9). In addition, the kinetic reaction rate constants increased as the increasing temperature, and all models followed the Arrhenius law. Results of statistical correlations analysis suggested that at lower temperature, the generic amino acid route and the specific amino acid route may paly crucial roles for the formation of AA and 5-HMF, while at high temperature a linoleic acid pathway may be predominantly involved.

A novel single step solid-phase extraction combined with bromine derivatization method for rapid determination of acrylamide in coffee and its products by stable isotope dilution ultra-performance liquid chromatography tandem triple quadrupole electrospray ionization mass spectrometry

This work aimed to establish a novel determination method for acrylamide in coffee and its products by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). Acrylamide in samples were prepared by a single-step solid-phase extraction clean-up using mixed mode sorbents. The bromine derivatization efficiency of acrylamide and its internal standard were improved at an acidic condition. After derivation, the retention capability of acrylamide and its resistance to interference were significantly improved. The limit of detection (LOD) and the limit of quantification (LOQ) were 1.2 and 4 μg/kg for roasted and instant coffees, while they were 0.24 and 0.8 μg/kg for ready-to-drink coffees. The average recoveries for acrylamide ranged from 99.3 to 102.2% in coffee and its products. All the results showed that the developed method was simple, quick, specific and suitable for screening and determination of acrylamide in batch samples of coffee and its products.

The simultaneous inhibition of histidine on 5-hydroxymethylfurfural and acrylamide in model systems and cookies

5-Hydroxymethylfurfural (HMF) and acrylamide (AA) are neoformed food contaminants. In this study, the simultaneous inhibition of HMF and AA by histidine (His) were investigated. In the asparagine (Asn)/glucose (Glc) model system, the inhibition ratios of HMF and AA were in the range of 28-58% and 0-71% when 20 mmol/L His was added. In cookies, His also exhibited excellent inhibition effects on both HMF and AA. At the His concentration of 2% (w/w), the inhibition ratios of HMF and AA reached 90% and 65%. Additionally, the sensory quality of cookies was not affected significantly. Qualitative results suggested that His inhibited the formation of AA by the competitive reaction between His and Asn for Glc, as well as directly eliminated the formed HMF and AA via the carbonyl-amine reaction and the Michael addition, respectively. This study revealed that His could be applied for the inhibition of HMF and AA in heated food.

Investigation of thermal contaminants in coffee beans induced by roasting: A kinetic modeling approach

The roasting-induced formation of thermal contaminants in coffee beans, including 5-hydroxymethylfurfural (5-HMF), acrylamide (AA), furan (F), 2-methyl furan (2-MF), and 3-methyl furan (3-MF), was investigated using a kinetic modeling approach. Results showed that AA and 5-HMF formation and elimination occur simultaneously in coffee beans during roasting and that the related reactions follow first-order reaction kinetics. The concentrations of F, 2-MF, and 3-MF increased throughout the roasting experiment, and variations in the concentrations of these compounds during roasting could be best described by empirical, logistic model. The increase in weight loss and decrease in moisture content of the beans during roasting also displayed first-order reaction kinetics. High coefficients of determination (R² > 0.981) were observed for all fitted models, and the reaction rate constants of all models followed the Arrhenius law.

Dietary exposure to acrylamide: A critical appraisal on the conversion of disregarded intermediates into acrylamide and possible reactions during digestion

The amount of acrylamide in asparagine rich thermally processed foods has been broadly monitored over the past two decades. Acrylamide exposure can be estimated by using the concentration of acrylamide found in foods and alternatively, biomarkers of exposure are correlated. A better estimation of dietary acrylamide exposure is crucial for a proper food safety assessment, regulations, and public health research. This review addresses the importance of the presence of neglected Maillard reaction intermediates found in foods, that may convert into acrylamide during digestion and the fate of acrylamide in the gastrointestinal tract as a reactive compound. Therefore, it is questioned in this review whether acrylamide concentration in ingested foods is directly correlated with the dietary exposure to acrylamide.

•

Neglected Maillard reaction intermediates play role in acrylamide formation in gut.

•

Exposure may increase when intermediates are converted into acrylamide in the gut.

•

Nucleophiles cause elimination of acrylamide in the intestinal phase.

•

The fate of acrylamide during digestion could be important for exposure estimation.

Chemical Stability of Proteins in Foods: Oxidation and the Maillard Reaction

Protein is a major nutrient present in foods along with carbohydrates and lipids. Food proteins undergo a wide range of modifications during food production, processing, and storage. In this review, we discuss two major reactions, oxidation and the Maillard reaction, involved in chemical modifications of food proteins. Protein oxidation in foods is initiated by metal-, enzyme-, or light-induced processes. Food protein oxidation results in the loss of thiol groups and the formation of protein carbonyls and specific oxidation products of cysteine, tyrosine, tryptophan, phenylalanine, and methionine residues, such as disulfides, dityrosine, kynurenine, m-tyrosine, and methionine sulfoxide. The Maillard reaction involves the reaction of nucleophilic amino acid residues with reducing sugars, which yields numerous heterogeneous compounds such as α-dicarbonyls, furans, Strecker aldehydes, advanced glycation end-products, and melanoidins. Both protein oxidation and the Maillard reaction result in the loss of essential amino acids but may positively or negatively impact food structure and flavor. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Carob Pulp: A Nutritional and Functional By-Product Worldwide Spread in the Formulation of Different Food Products and Beverages. A Review

Carob (Ceratonia siliqua L.) pod is a characteristic fruit from the Mediterranean regions. It is composed by seeds, the valuable part due to the extraction of locust bean gum, and the pulp, considered a by-product of the fruit processing industry. Carob pulp is a mixture of macro- and micronutrients, such as carbohydrates, vitamins and minerals, and secondary metabolites with functional properties. In the last few years, numerous studies on the chemical and biological characteristics of the pulp have been performed to encourage its commercial use. Its potential applications as a nutraceutical ingredient in many recipes for food and beverage elaborations have been extensively evaluated. Another aspect highlighted in this work is the use of alternative processes or conditions to mitigate furanic production, recognized for its toxicity. Furthermore, carob pulp’s similar sensorial, chemical and biological properties to cocoa, the absence of the stimulating alkaloids theobromine and caffeine, as well as its low-fat content, make it a healthier potential substitute for cocoa. This paper reviews the nutritional and functional values of carob pulp-based products in order to provide information on the proclaimed health-promoting properties of this interesting by-product.

Contribution of starch to the flavor of rice-based instant foods

Increased consumption of instant foods has led to research attention, especially rice-based instant foods. Starch, one of the most important components of rice, significantly affects food quality. However, the mechanisms by which starch contributes to rice-based instant foods flavor are poorly understood in many cases. The review aims to describe the common mechanisms by which starch contributes to food flavor, including participating in flavor formation, and affecting flavor release throughout starch multiscale structure: particle morphology, crystal structure, molecular structure. Five specific examples of rice-based instant foods were further analyzed to summarize the specific contribution of starch to flavor, including instant rice, fermented rice cake, rice noodles, fried rice, and rice dumplings. During foods processing, reducing sugars produced by heating or enzymatic hydrolysis of starch participate in Maillard reaction, caramelization and thermal degradation, which directly or indirectly affect the formation of flavor compounds. In addition, adsorption by granules, encapsulation by retrograded V-type crystal, and controlled release by starch gel all contribute to rice-based instant food flavor qualities. These mechanisms jointly contribute to flavor compounds formation and release. Proper theoretical application and improved processing methods are needed to promote the high-quality, mechanization, and automation of rice-based instant foods production.

Effect of formulation and heat treatment on 5-hydroxymethylfurfural formation and quality parameters in dulce de leche

This work assessed the effect of formulation and heat treatment on the formation of HMF, non-enzymatic browning and rheology of dulce de leche (DL). Laboratory scale trials were developed with different DL formulas: whole powdered milk, skimmed milk, and lactose-free skimmed milk, and added sucrose, subjected to different processing temperatures (110°C, 120°C, and 130°C). Additionally, an alternative formulation was designed in which half the sucrose was replaced by 50% tagatose. DL samples were compared with three commercial products in terms of water activity, soluble solids content, pH, colour, apparent viscosity, and HMF concentration. HMF formation in DL was mitigated (35%) in a lactose-free formulation by lowering the process temperature. Moreover, HMF formation was reduced up to 80% replacing sucrose by tagatose without affecting the quality parameters (pH, soluble solids, colour, and apparent viscosity). Decrease in processing temperature and the use of tagatose are viable alternatives for HMF mitigation in DL.

An overview of conventional and emerging techniques of roasting: Effect on food bioactive signatures

Roasting is a food processingtechnique that employs the principle of heating to cook the product evenly and enhance the digestibility, palatability and sensory aspects of foods with desirable structural modifications of the food matrix. With the burgeoning demand for fortified roasted products along with the concern for food hygiene and the effects of harmful compounds, novel roasting techniques, and equipment to overcome the limitations of conventional operations are indispensable. Roasting techniques employing microwave, infrared hot-air, superheated steam, Revtech roaster, and Forced Convection Continuous Tumble (FCCT) roasting have been figuratively emerging to prominence for effectively roasting different foods without compromising the nutritional quality. The present review critically appraises various conventional and emerging roasting techniques, their advantages and limitations, and their effect on different food matrix components, functional properties, structural attributes, and sensory aspects for a wide range of products. It was seen that thermal processing at high temperatures for increased durations affected both the physicochemical and structural properties of food. Nevertheless, novel techniques caused minimum destructive impacts as compared to the traditional processes. However, further studies applying novel roasting techniques with a wide range of operating conditions on different types of products are crucial to establish the potential of these techniques in obtaining safe, quality foods.

Fluorescence nanoparticles from instant coffee accumulated in lysosome and induced lysosome-dependent cell death via necroptosis-like pathway

Fluorescence nanoparticles (FNs) are a type of nano-dots generated during baking process, and their safety on organism is unclear and little is known to their cytotoxicity. In this study, the FNs from instant coffee were purified and characterized. The FNs with an average size about 2.08 nm emitted bright blue fluorescence with lifetime about 2.74 ns. The element and functional groups were analyzed by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy, respectively. The results indicated that these FNs were internalized in lysosomes and induced apoptosis of normal rat kidney (NRK) and Caco-2 cells. While, the pan-caspase inhibitor, Z-VAD-FMK didn't decrease the rate of apoptosis and cell death of the FNs-treated NRK and Caco-2 cells. These internalized FNs enlarged lysosomes, decreased lysosomal enzyme degradation activity and increased lysosomal pH value. Partial co-localization of receptor-interacting serine-threonine kinase 3 (RIPK3) to lysosomes in FNs-treated cells was observed, and the amount of RIPK1 and RIPK3 increased after treatment with FNs. The results demonstrated that the FNs from instant coffee induced lysosomal membrane permeabilization and initiated necroptosis.

Acrylamide formation and antioxidant activity in coffee during roasting - A systematic study

The aim of this study was to investigate the effect of the coffee roasting process on both toxic and some beneficial antioxidant compounds, applying a systematic and broad approach. Arabica and Robusta green coffee beans were roasted in a lab-scale roaster for different times in order to achieve five roasting degrees (from light to dark) and to assess the evolution of acrylamide (AA), trigonelline, nicotinic acid and caffeoylquinic acids contents (determined by HPLC) as well as antioxidant activity (evaluated by Folin-Ciocalteu, FRAP, DPPH, ABTS assays). The results confirmed that the AA levels and antioxidant activity reached a maximum in the first coffee roasting degrees and then decreased prolonging the heating process, both in Arabica and Robusta samples. Nevertheless, the thermal reduction observed was greater for AA compared to antioxidant activity, which was only slightly reduced due to the balance between the degradation and the neoformation of antioxidant compounds.

Aroma dynamic characteristics during the process of variable-temperature final firing of Congou black tea by electronic nose and comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry

The drying technology is crucial to the quality of Congou black tea. In this study, the aroma dynamic characteristics during the variable-temperature final firing of Congou black tea was investigated by electronic nose (e-nose) and comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC × GC-TOFMS). Varying drying temperatures and time obtained distinctly different types of aroma characteristics such as faint scent, floral aroma, and sweet fragrance. GC × GC-TOFMS identified a total of 243 volatile compounds. Clear discrimination among different variable-temperature final firing samples was achieved by using partial least squares discriminant analysis (R2Y = 0.95, Q2 = 0.727). Based on a dual criterion of variable importance in the projection value (VIP > 1.0) and one-way ANOVA (p < 0.05), ninety-one specific volatile biomarkers were identified, including 2,6-dimethyl-2,6-octadiene and 2,5-diethylpyrazine with VIP > 1.5. In addition, for the overall odor perception, e-nose was able to distinguish the subtle difference during the variable-temperature final firing process.

Organic Selenium as Antioxidant Additive in Mitigating Acrylamide in Coffee Beans Roasted via Conventional and Superheated Steam

Selenium is an essential micronutrient with significant antioxidant activity promising in mitigating the formation of acrylamide during high-temperature roasting. In this study, green coffee beans pretreated with selenium (Se-coffee) were investigated on their selenium uptake, selenium retention in green and roasted beans, antioxidant activities, and formation of acrylamide during conventional and superheated steam roasting. Comparisons were made with positive (pretreated without selenium) and negative (untreated) controls. The acrylamide formation was significantly inhibited in Se-coffee (108.9-165.3 μg/kg) compared to the positive and negative controls by 73.9% and 52.8%, respectively. The reduction of acrylamide by superheated steam roasting only observed in the untreated coffee beans (negative control) by 32.4% parallel to the increase in its antioxidant activity. Selenium pretreatment significantly increased antioxidant activity of the roasted Se-coffee beans after roasting although soaking pretreatment significantly reduced antioxidant activity in the green beans. Acrylamide reduction in the roasted coffee beans strongly correlated with the change in antioxidant capacities after roasting (∆FRAP, 0.858; ∆DPPH, 0.836). The results indicate that the antioxidant properties of the organic selenium suppressed acrylamide formation during coffee roasting.

Optimization of the roasting conditions to lower acrylamide content and improve the nutrient composition and antioxidant properties of Coffea arabica

Roasting is the most common method of processing coffee. During roasting, aromatic compounds are generated due to various reactions, which are important for developing color, flavor and aroma. Acrylamide is an undesirable carcinogenic substance that is metabolically activated and formed during the coffee roasting process. Coffea arabica was first found in Ethiopia, and Ethiopia can produce a large volume of coffee. The major coffee-producing areas in Ethiopia are Hararghe, Sidama, Gimbi/Nekemte, Yergachefe and Limu. The primary purpose of this study was to quantify the acrylamide contents of brewed and roasted coffee collected from street coffee sellers and industrial processors found in Addis Ababa, Ethiopia, and optimize the roasting conditions for Sidama coffee. The acrylamide contents were determined by HPLC using a DAD at 210 nm, the antioxidant property were examined using a UV-spectrophotometer, and moisture and nutrient composition of coffee was determined using the method described by the AOAC (Association of Official Analytical Chemists). The roasting temperature and time were optimized based on the acrylamide content, nutritional composition and antioxidant property of the coffee using central composite design. The roasting temperature and time significantly affected (p<0.05) the acrylamide level, nutritional composition and antioxidant property of the coffee. The acrylamide contents of street and industrial processed powdered coffee were 346 ±19 to 701±38μg/kg and 442±14 to 906±7μg/kg, respectively. Brewed coffee from street vendors and industrial processing had acrylamide contents of 25±2 to 49±1μg/L and 63±2 to 89±4μg/L, respectively. The EC50 values for scavenging radicals for the optimized coffee ranged from 171±0 to 111±4 μg/L. The optimal roasting temperature and time were 190°C and 6 minutes, at this temperature and time the acrylamide content decreased, and the antioxidant and nutritional compositions of the coffee improved.