Influence of processing and pH on amino acid profile, morphology, electrophoretic pattern, bioactive potential and functional characteristics of alfalfa protein isolates

Screening of Potential Angiotensin-Converting Enzyme-Inhibitory Peptides in Squid (Todarodes pacificus) Skin Hydrolysates: Preliminary Study of Its Mechanism of Inhibition

BACKGROUND

Hypertension has been identified as a significant risk factor for cardiovascular disease. Given the prevalence of the adverse effects of angiotensin-converting enzyme-inhibitory (ACEI) drugs, natural and effective alternatives to these medications need to be identified.

METHODS

An investigative study was conducted to assess the ACEI capacity and structural characteristics of enzymatic hydrolysates with varying molecular weights derived from squid skin. The amino acid sequences of the enzymatic digests were analyzed via Nano LC-MS/MS and screened for peptides with ACEI activity using an in silico analysis. Furthermore, molecular docking was employed to investigate the interaction between potential ACEI peptides and ACE.

RESULTS

TPSH-V (MW < 1 kDa) exhibited the highest rate of ACEI, a property attributable to its substantial hydrophobic amino acid content. Additionally, TPSH-V exhibited high temperature and pH stability, indicative of regular ordering in its secondary structure. The binding modes of four potential novel ACEI peptides to ACE were predicted via molecular docking with the sequences of FHGLPAK, IIAPPERKY, RGLPAYE, and VPSDVEF, all of which can bind to the ACE active site via hydrogen bonding, with FHGLPAK, RGLPAYE, and VPSDVEF being able to coordinate with Zn2+.

CONCLUSIONS

Squid skin constitutes a viable resource for the production of ACEI peptides.

Stabilization and extraction of alfalfa (Medicago sativa) protein following multiple postharvest processing techniques coupled with protease inactivation

There is an ever-increasing demand for novel plant proteins that are non-allergenic, nutritionally complete, adequately functional, and can be sustainably sourced. RuBisCo is a protein that fulfills these requirements and can be sourced from alfalfa (Medicago sativa). Therefore, this study investigated several techniques to adequately extract alfalfa protein. Protein extraction from commercial sun-dried alfalfa was largely unsuccessful (≤ 5 % protein yield) due to endogenous proteolytic activity. Flash freezing of freshly harvested alfalfa followed by juicing and freeze drying (FF/J/FD) effectively preserved protein integrity with 12 % degree of hydrolysis (%DH) compared to 20 % DH in the oven dried (OD) sample. However, the FF/J/FD sample had significantly higher protease activity than the OD sample (26 vs. 11 Units/g protein). A combined acid (pH 3.0) and thermal (95 °C) treatment reduced protease activity to a negligible level in both FF/J/FD and FF/J/spray dried (FF/J/SD) samples. Protein extraction utilizing FF/J/FD sample subjected to acid/thermal protease inactivation was relatively successful with 32 % protein yield and 74 % protein purity. Protein polymerization due to thermal treatment contributed to reduced protein yield. This work provided not only foundational basis to determine the best post-harvest management practices to control proteolysis in alfalfa, but also essential information that will guide future attempts at protein extraction from green biomass to produce valuable protein ingredients for various food applications.

Isolation and ultrasonication of pearl millet protein: Effect on techno-functional, structural, molecular interaction, and rheological properties

In the present study, the impact of ultrasonication treatment (US) at varying time duration (10 and 20 min) on pearl millet protein (PMP) was evaluated. The native and ultrasonicated PMP were evaluated for techno-functional properties, zeta potential, particle size, SEM, FTIR, thermal properties and dynamic rheology. The significant (p < 0.05) increase in WAC, OAC, surface hydrophobicity (H0), solubility, foaming and emulsification properties, in vitro protein digestibility, lightness (L*), and whiteness index (WI) was recorded for ultrasonicated PMP. However, with an increase in ultrasonication treatment time, enthalpies of denaturation (ΔH) from -0.12 to -7.18 J/g and a change in denaturation temperatures (Td) i.e. 40.87 ℃ (10 min) and 85.51℃ (20 min) was increased. Also, reduction in particle size from 4.13 μm to 2.32 μm was recorded after ultrasonication of protein samples. The ultrasonication treatment had altered the conformation and structure of PMP, which were confirmed by the results observed for surface hydrophobicity, SEM, FTIR and dynamic rheology. The changes in PMP subsequently improved i.e. solubility, surface hydrophobicity, thermal properties, and techno-functional properties.

Ultrasonication modifies the structural, thermal and functional properties of pumpkin seed protein isolate (PSPI)

Protein isolates from pumpkin seeds were prepared and then treated with high-intensity ultrasound (HIUS) using a probe-based method. The impact of ultrasonication on the physicochemical, molecular, and thermal properties of these isolates were analyzed and compared to untreated controls. Results showed significant improvements (p ≤ 0.05) in color (L*, a*, b* values), solubility, emulsification capacity, and stability, as well as a reduction in molecular weight, indicating enhanced functionality of the pumpkin seed protein isolates (PSPIs) after HIUS treatment. However, HIUS treatment decreased the denaturation temperature (Td), denaturation enthalpy (ΔH), thermal stability, and particle size of the isolates. With treatment durations ranging from 5 to 20 min, Td dropped from 67.31 °C to 56.38 °C, and ΔH declined from 45.78 to 35.43 J/g, likely due to structural and conformational modifications from ultrasonic-induced molecular bond disruptions. The greatest reduction in particle size, from 117.46 μm to 85.26 μm, was observed after 20 min of ultrasonication. X-ray diffraction (XRD) analysis showed two distinct diffraction peaks at 2θ = 10° and 2θ = 20°, indicating altered crystallite sizes post-ultrasound treatment. Ultrasonication induced structural and conformational changes in the pumpkin seed protein isolates, as confirmed by SDS-PAGE and weight loss analyses. Alterations in the SDS-PAGE profile and reduced weight loss were associated with improved solubility and enhanced thermal and functional properties in the treated pumpkin seed protein isolates. This emphasizes the potential of PSPI to increase their value-added potential through ultrasonication.

Perilla Seed Oil and Protein: Composition, Health Benefits, and Potential Applications in Functional Foods

Perilla (Perilla frutescens) seeds are emerging as a valuable resource for functional foods and medicines owing to their rich oil and protein content with diverse nutritional and health benefits. Perilla seed oil (PSO) possesses a high level of a-linolenic acid (ALA), a favorable ratio of unsaturated to saturated fatty acids, and other active ingredients such as tocopherols and phytosterols, which contribute to its antioxidant, anti-inflammatory, and cardiovascular protective effects. The balanced amino acid ratio and good functional properties of perilla seed protein make it suitable for a variety of food applications. The chemical composition, health benefits, and potential applications of PSO as well as the structural characterization, functional properties, modification methods, bioactivities, and application scenarios of perilla seed protein are comprehensively presented in this paper. Furthermore, the challenges as well as future prospects and research focus of PSO and perilla seed protein are discussed. The growing interest in plant-based diets and functional foods has made PSO and perilla seed protein promising ingredients for the development of novel foods and health products. The purpose of this paper is to highlight implications for future research and development utilizing these two untapped resources to improve human health and nutrition.

Identification and molecular docking of novel antioxidant peptides from Candida utilis

The current trend is the promotion of antioxidants that are beneficial for both health and the environment. Candida utilis have garnered considerable attention due to their commendable attributes such as non-toxicity and the ability to thrive in waste. Therefore, Candida utilis was used as raw material to isolate and identify new antioxidant peptides by employing methods such as ultrafiltration, DEAE Sepharose Fast Flow, and liquid chromatography-tandem mass spectrometry. The antioxidant mechanism of peptides was investigated by molecular docking. The properties of antioxidant peptides were evaluated using a variety of computational tools. This study resulted in the identification of two novel antioxidant peptides. According to the molecular docking results, the antioxidant mechanism of Candida utilis peptides operates by obstructing the entry to the myeloperoxidase activity cavity. The (-) CDOCKER energy of antioxidant peptides was 6.2 and 6.1 kcal/mol, respectively. Additionally, computer predictions indicated that antioxidant peptides exhibited non-toxicity and poor solubility.

Structure, functional and physicochemical properties of lotus seed protein under different pH environments

BACKGROUND

The present study investigated the structure, functional and physicochemical properties of lotus seed protein (LSP) under different pH environments. The structures of LSP were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, Fourier transform infrared spectroscopy (FTIR), zeta potential, particle size distributions, free sulfhydryl and rheological properties. The functional and physicochemical properties of LSP were characterized by color, foaming property, emulsification property, solubility, oil holding capacity, water holding capacity, differential scanning calorimetry analysis and surface hydrophobicity.

RESULTS

LSP was mainly composed of eight subunits (18, 25, 31, 47, 51, 56, 65 and 151 kDa), in which the richest band was 25 kDa. FTIR results showed that LSP had high total contents of α-helix and β-sheet (44.81-46.85%) in acidic environments. Meanwhile, there was more β-structure and random structure in neutral and alkaline environments (pH 7.0 and 9.0). At pH 5.0, LSP had large particle size (1576.98 nm), high emulsion stability index (91.43 min), foaming stability (75.69%) and water holding capacity (2.21 g g-1), but low solubility (35.98%), free sulfhydryl content (1.95 μmol g-1) and surface hydrophobicity (780). DSC analysis showed the denaturation temperatures (82.23 °C) of LSP at pH 5.0 was higher than those (80.10, 80.52 and 71.82 °C) at pH 3.0, 7.0 and 9.0. The analysis of rheological properties showed that LSP gel had high stability and great strength in an alkaline environment.

CONCLUSION

The findings of the present study are anticipated to serve as a valuable reference for the implementation of LSP in the food industry. © 2024 Society of Chemical Industry.

Pomegranate seed as a novel source of plant protein: Optimization of protein extraction and evaluation of in vitro digestibility, functional, and thermal properties

This research was carried out to optimize the extraction process of proteins from pomegranate seeds and characterize their in vitro digestibility as well as their thermal and functional properties. For this purpose, the study screened five parameters (liquid/solid ratio, pH, temperature, NaCl concentration, and time) that could potentially influence the extraction process. This screening was conducted using a two-level Placket-Burman design (PBD). The significant parameters (pH and NaCl concentration) were subsequently optimized using a three-level face-centered central composite design (FCCD) to determine the optimum extraction conditions. A maximum protein recovery of 83.8% was obtained at pH 11.0 and NaCl concentration of 0.0 M. Pomegranate seed protein isolate (PSPI) with a protein content of 92.4% (w/w) was obtained through the isoelectric precipitation of pomegranate seed protein extracted under the optimized conditions. An emulsifying activity index of 14.1 m2 g-1 was observed at the isoelectric pH, where the emulsion stability index was at 8.2%. PSPI also showed high water- and oil-holding capacities (3.7 and 4.3 g g-1, respectively). The essential amino acid levels in PSPI (except for valine and isoleucine) exceeded the recommended amounts set by WHO/FAO/UNU for adults, highlighting its high nutritional value. Based on thermal analysis data, denaturation of PSPI could occur at 89.5°C. The in vitro digestibility of PSPI was found to be 74.3%. PSPI shows a potential as a novel ingredient for substituting animal-based proteins in various food applications.

Upcycling of Defatted Sesame Seed Meal via Protein Amyloid-Based Nanostructures: Preparation, Characterization, and Functional and Antioxidant Attributes

Herein, the possibility of valorizing defatted sesame seed meal (DSSM) as a viable source for valuable plant proteins and amyloid-based nanostructure was investigated. Sesame seed protein isolate (SSPI) and the major storage protein globulin (SSG) were prepared by alkaline extraction-isoelectric point precipitation as well as fractionation in the case of SSG. The protein samples were characterized for their physicochemical attributes. SSPI and SSG were also evaluated for their ability to form amyloid structures under heating (90 °C) at low pH (2.0). Additionally, the functional attributes, antioxidant activity, and biocompatibility of the proteins and amyloid nanostructures were also examined. SSPI and SSG were both successfully prepared from DSSM. The data showed that the physicochemical attributes of both protein samples were quite similar, except for the fact that SSG was mostly composed of 11S globulin, as evinced by Tricine-SDS-PAGE analysis. TEM micrographs revealed that SSG was able to form curly-shaped fibrillar amyloid structures, whereas those derived from SSPI were mostly amorphous. Thioflavin-T assay and Tricine-SDS-PAGE analysis indicated that acidic heating promoted protein hydrolysis and self-aggregation of the hydrolyzed peptides into a β-sheet rich amyloid structure. Importantly, the amyloid preparations displayed commendable solubility, superior water and oil holding capacities, and antioxidant activity against DPPH and ABTS. The protein amyloid nanostructures were found to be non-toxic against RAW264.7 cells, HaCaT cells, and red blood cells. These findings indicate that DSSM could be upcycled into valuable protein amyloid structures with good potentialities as novel food ingredients.

Effect of extraction pH on amino acids, nutritional, in-vitro protein digestibility, intermolecular interactions, and functional properties of guar germ proteins

The chemical compositions, intermolecular interactions, and functional properties of guar germ proteins (GGP) were investigated at different extraction pH (7 to 11). The protein efficiency ratio, essential amino acid index (46.53), predicted biological value (39.02), nutritional index (42.67), and protein purity (91.69 %) were found to be highest at pH 9. The in-vitro protein digestibility of GGP sample was highest at pH 11. From SDS-PAGE, the band intensity (<10 kDa) became thinner with an increase in extraction pH from 7 to 9 and then thicker. Meanwhile, smallest particle size and weaker ionic and hydrogen bonds were found at pH 11. The β-sheet content was more dominating in GGP samples. Moreover, higher denaturation temperatures of GGP samples indicated that protein molecules had a compact tertiary structure. Furthermore, the GGP extracted at pH 7 showed better functional properties. The principal component analysis suggested that pH 9 was more suitable for isolating GGP.

Euglena gracilis Protein: Effects of Different Acidic and Alkaline Environments on Structural Characteristics and Functional Properties

Due to the growing demand for human-edible protein sources, microalgae are recognized as an economically viable alternative source of proteins. The investigation into the structural characteristics and functional properties of microalgin is highly significant for its potential application in the food industry as an alternative source of protein. In this research, we extracted protein from Euglena gracilis by using alkaline extraction and acid precipitation and investigated its structural characteristics and functional properties in different acidic and alkaline environments. The molecular weight distribution of Euglena gracilis protein (EGP), as revealed by the size exclusion chromatography results, ranges from 152 to 5.7 kDa. EGP was found to be rich in hydrophobic amino acids and essential amino acids. Fourier infrared analysis revealed that EGP exhibited higher α-helix structure content and lower β-sheet structure content in alkaline environments compared with acidic ones. EGP exhibited higher foaming properties, emulsifying activity index, solubility, free sulfhydryl, and total sulfhydryl in pH environments far from its isoelectric point, and lower fluorescence intensity (2325 A.U.), lower surface hydrophobicity, larger average particle size (25.13 µm), higher emulsifying stability index, and water-holding capacity in pH environments near its isoelectric point. In addition, X-ray diffraction (XRD) patterns indicated that different acidic and alkaline environments lead to reductions in the crystal size and crystallinity of EGP. EGP exhibited high denaturation temperature (Td; 99.32 °C) and high enthalpy (ΔH; 146.33 J/g) at pH 11.0, as shown by the differential scanning calorimetry (DSC) results. The findings from our studies on EGP in different acidic and alkaline environments provide a data basis for its potential commercial utilization as a food ingredient in products such as emulsions, gels, and foams.

Isolation of detoxified cassava (Manihot esculenta L.) leaf protein by alkaline extraction-isoelectric precipitation: Optimization and its characterization

The cassava leaves protein isolate extraction and optimization were investigated using response surface methodology, where the maximum protein content (21.83 ± 0.41 g/100 g dm), extraction yield (18.31 ± 0.53%), and protein recovery yield (69 ± 1.31%) were obtained at optimal conditions: 114 min extraction time, 46 °C extraction temperature, 23.5 mL/g solvent/solute ratio and pH 11.0 value. The presence of toxicant (Cyanide) and anti-nutrient (tannin) in cassava leaves reduced the bio-accessibility of its protein isolate, strictly prohibiting its consumption. Therefore, detoxification was applied to diminish cyanide and tannin to 85% and 69% in leaves, respectively, where the protein content was reduced to 9.7%. However, detoxified cassava leaf protein isolate exhibited changes in the compositional, structural, morphological, molecular, and thermal characteristics compared to the controlled one. Moreover, the functional properties in protein isolate improved after detoxification at different pH conditions, which can be used as an active ingredient in various foods.

Olive leaf protein: Extraction optimization, in vitro digestibility, structural and techno-functional properties

Olive leaf, as an important by-product of olive farming, is generated from the pruning and harvesting of olive trees and represents >10 % of the total olive weight. The present study was conducted to evaluate the composition, functional and structural characterizations, as well as the in vitro digestibility of olive leaf proteins isolated from ultrasonic-assisted extraction, comparing to classical and industrial techniques. The ultrasound-assisted extraction of olive leaf protein was optimized by the simultaneous maximization of the yield and purity of protein using a Box-Behnken design (BBD) of response surface methodology (RSM). The results indicated that the optimal extraction conditions were as follows: pH of 10.99, temperature of 40.48 °C, sonication time of 47.25 min, and solvent/solid ratio of 24.08 mL/g. Under these conditions, the extraction yield and protein content were 11.67 and 51.2 %, respectively, which were significantly higher than those obtained by the conventional techniques. Regarding the functionality of protein, extraction technique had significant impacts on the structural and functional properties of proteins. In general, ultrasound assisted extraction had higher solubility, and better foaming and thermal properties and in vitro digestibility but lower emulsifying stability and fluid binding capacity compared to conventional ones. Ultrasound-assisted alkaline extraction has great potential to produce edible olive leaf protein with modified functional properties that can be used for various aims in the food applications.

pH-induced physiochemical and structural changes of milk proteins mixtures and its effect on foaming behavior

Milk proteins are well known to produce aerated food due to the amphiphilicity. However, milk proteins are commonly added in blends for the desirable properties in food industry. In this study, the foaming properties of milk protein mixtures (MPM), a mixtures of whey protein isolated (WPI) and milk protein concentrate (MPC), was studied through foaming capacity (FC), foam stability (FS), and foam morphology at pH 3.0-9.0. Physiochemical, structural, surface properties, and Pearson correlation analysis were measured to gain insight into foaming behavior. Results indicated that MPM showed excellent FC (113.0-114.3 %) and FS (90.7-93.0 %) at pH 6.0-9.0, and foam displayed a smaller size and uniform distribution. MPM solutions showed smaller particles, higher solubility, and lower apparent viscosity at pH 6.0-9.0, which resulted in an increase in surface pressure and adsorption rate (Kdiff), facilitating more protein absorbed to interface. To further investigate structural changes, various spectral methods were used, in which the structure of MPM was changed with pH. Correlation analysis further suggests that Kdiff and solubility positively affect the formation of foam, while free sulfhydryl and β-sheet contributed to stabilizing foams. These findings provide valuable information on MPM as ingredients for aerated foods under acidic, neutral, and alkaline conditions.

Techno-functional attributes of oilseed proteins: influence of extraction and modification techniques

Plant-based protein isolates and concentrates are nowadays becoming popular due to their nutritional, functional as well as religious concerns. Among plant proteins, oilseeds, a vital source of valuable proteins, are continuously being explored for producing protein isolates/concentrates. This article delineates the overview of conventional as well as novel methods for the extraction of protein and their potential impact on its hydration, surface properties, and rheological characteristics. Moreover, proteins undergo several modifications using physical, chemical, and biological techniques to enhance their functionality by altering their microstructure and physical performance. The modified proteins hold a pronounced scope in novel food formulations. An overview of these protein modification approaches and their effects on the functional properties of proteins have also been presented in this review.

Effects of slit dual-frequency ultrasound-assisted pulping on the structure, functional properties and antioxidant activity of Lycium barbarum proteins and in situ real-time monitoring process

To improve the protein dissolution rate and the quality of fresh Lycium barbarum pulp (LBP), we optimized the slit dual-frequency ultrasound-assisted pulping process, explored the dissolution kinetics of Lycium barbarum protein (LBPr), and established a near-infrared spectroscopy in situ real-time monitoring model for LBPr dissolution through spectral information analysis and chemometric methods. The results showed that under optimal conditions (dual-frequency 28-33 kHz, 300 W, 31 min, 40 °C, interval ratio 5:2 s/s), ultrasonic treatment not only significantly increased LBPr dissolution rate (increased by 71.48 %, p < 0.05), improved other nutrient contents and color, but also reduced the protein particle size, changed the amino acid composition ratio and protein structure, and increased the surface hydrophobicity, zeta potential, and free sulfhydryl content of protein, as well as the antioxidant activity of LBPr. In addition, ultrasonication significantly improved the functional properties of the protein, including thermal stability, foaming, emulsification and oil absorption capacity. Furthermore, the real-time monitoring model of the dissolution process was able to quantitatively predict the dissolution rate of LBPr with good calibration and prediction performance (Rc = 0.9835, RMSECV = 2.174, Rp = 0.9841, RMSEP = 1.206). These findings indicated that dual-frequency ultrasound has great potential to improve the quality of LBP and may provide a theoretical basis for the establishment of an intelligent control system in the industrialized production of LBP and the functional development of LBPr.

Plant-based proteins: advanced extraction technologies, interactions, physicochemical and functional properties, food and related applications, and health benefits

Even though plant proteins are more plentiful and affordable than animal proteins in comparison, direct usage of plant-based proteins (PBPs) is still limited because PBPs are fed to animals as feed to produce animal-based proteins. Thus, this work has comprehensively reviewed the effects of various factors such as pH, temperature, pressure, and ionic strength on PBP properties, as well as describes the protein interactions, and extraction methods to know the optimal conditions for preparing PBP-based products with high functional properties and health benefits. According to the cited studies in the current work, the environmental factors, particularly pH and ionic strength significantly affected on physicochemical and functional properties of PBPs, especially solubility was 76.0% to 83.9% at pH = 2, while at pH = 5.0 reduced from 5.3% to 9.6%, emulsifying ability was the lowest at pH = 5.8 and the highest at pH 8.0, and foaming capacity was lowest at pH 5.0 and the highest at pH = 7.0. Electrostatic interactions are the main way for protein interactions, which can be used to create protein/polysaccharide complexes for food industrial purposes. The extraction yield of proteins can be reached up to 86-95% with high functional properties using sustainable and efficient routes, including enzymatic, ultrasound-, microwave-, pulsed electric field-, and high-pressure-assisted extraction. Nondairy alternative products, especially yogurt, 3D food printing and meat analogs, synthesis of nanoparticles, and bioplastics and packaging films are the best available PBPs-based products. Moreover, PBPs particularly those that contain pigments and their products showed good bioactivities, especially antioxidants, antidiabetic, and antimicrobial.

Screening and Activity Analysis of α-Glucosidase Inhibitory Peptides Derived from Coix Seed Prolamins Using Bioinformatics and Molecular Docking

Hydrolysates of coix seed prolamins (CHPs) have an excellent hypoglycemic effect and can effectively inhibit α-glucosidase, which is the therapeutic target enzyme for type 2 diabetes mellitus. However, its hypoglycemic components and molecular mechanisms remain unclear, and its stability in food processing needs to be explored. In this study, four potential α-glucosidase inhibitory peptides (LFPSNPLA, FPCNPLV, HLPFNPQ, LLPFYPN) were identified and screened from CHPs using LC-MS/MS and virtual screening techniques. The results of molecular docking showed that the four peptides mainly inhibited α-glucosidase activity through hydrogen bonding and hydrophobic interactions, with Pro and Leu in the peptides playing important roles. In addition, CHPs can maintain good activity under high temperatures (40~100 °C) and weakly acidic or weakly alkaline conditions (pH 6.0~8.0). The addition of glucose (at 100 °C) and NaCl increased the inhibitory activity of α-glucosidase in CHPs. The addition of metal ions significantly decreased the inhibitory activity of α-glucosidase by CHPs, and their effects varied in magnitude with Cu2+ having the largest effect followed by Zn2+, Fe3+, K+, Mg2+, and Ca2+. These results further highlight the potential of CHPs as a foodborne hypoglycemic ingredient, providing a theoretical basis for the application of CHPs in the healthy food industry.

Bitter Almond Albumin ACE-Inhibitory Peptides: Purification, Screening, and Characterization In Silico, Action Mechanisms, Antihypertensive Effect In Vivo, and Stability

Almond expeller is an undeveloped reservoir of bioactive peptides. In the current study, a zinc ion ligand Arg-Pro-Pro-Ser-Glu-Asp-Glu-Asp-Gln-Glu (RPPSEDEDQE) offering a noncompetitive inhibitory effect on ACE (IC50: 205.50 μmol·L-1) was identified from almond albumin hydrolysates via papain and thermolysin hydrolysis, subsequent chromatographic separation, and UPLC-Q-TOF-MS/MS analysis. Molecular docking simulated the binding modes of RPPSEDEDQE to ACE and showed the formation of hydrogen bonds between RPPSEDEDQE and seven active residues of ACE. Moreover, RPPSEDEDQE could bind to fifteen active sites of ACE by hydrophobic interactions, and link with the His387 and zinc ions of the zinc tetrahedral coordination. Ultraviolet wavelength scanning and Fourier-transformed infrared spectroscopy analysis revealed that RPPSEDEDQE can provide multiple binding sites for zinc ions. However, RPPSEDEDQE cannot bind with any central pocket of ACE, which was evidenced by an inhibition kinetics experiment. Additionally, the zinc-chelating capacity and inhibiting ability against ACE of RPPSEDEDQE were both not significantly reduced by the hydrolysis of gastrointestinal enzymes. A moderate to high dose of RPPSEDEDQE (100-150 mg·kg bw-1) significantly reduced the systolic and diastolic blood pressure of spontaneous hypertensive rats, but chelation with zinc ions decreased its antihypertensive efficiency. These results indicate that bitter almond albumin peptides may be used for lowering blood pressure.

Characterization of bioprocessed white and red sorghum flours: Anti-nutritional and bioactive compounds, functional properties, molecular, and morphological features

In the current investigation, white and red sorghum grains were exposed to bioprocessing techniques, such as soaking, germination, fermentation, and dual processing (both germination and fermentation). Germination and fermentation resulted in improved bioactive profile attributing to better antioxidant activity, whereas a reduction in antinutrient components was observed. On the other hand, soaking had decreased phenolic components and anti-nutritional factors attributing to their leaching in the soaking water. A significant change in the functional properties and color profile was also observed on bioprocessing. It also caused alterations in the morphological structure of the starch-protein matrix and molecular interactions of certain functional groups that reveal the synthesis of certain new bioactive compounds in the flour. The alterations in the bioprocessed flours occurred due to the structural breakdown attributing to the activity of hydrolytic enzymes that were activated during the processing treatments. Bioprocessing was also responsible for the degradation of the starch granules and unfolding of the protein matrix, thus altering the in vitro nutrient digestibility of the flours. Principal component analysis was used to authenticate the differences between different treatments and observations recorded. These bioprocessed flours could be potential ingredients for several valorized cereal products.

Study on the In Silico Screening and Characterization, Inhibition Mechanisms, Zinc-Chelate Activity, and Stability of ACE-Inhibitory Peptides Identified in Naked Oat Bran Albumin Hydrolysates

In this study, naked oat bran albumin hydrolysates (NOBAH) were subjected to gel chromatography with Sephadex G-15, reverse phase-high liquid performance separation, and UPLC-ESI-MS/MS identification. Six safe peptides including Gly-Thr-Thr-Gly-Gly-Met-Gly-Thr (GTTGGMGT), Gln-Tyr-Val-Pro-Phe (QYVPF), Gly-Ala-Ala-Ala-Ala-Leu-Val (GAAAALV), Gly-Tyr-His-Gly-His (GYHGH), Gly-Leu-Arg-Ala-Ala-Ala-Ala-Ala-Ala-Glu-Gly-Gly (GLRAAAAAAEGG), and Pro-Ser-Ser-Pro-Pro-Ser (PSSPPS) were identified. Next, in silico screening demonstrated that QYVPF and GYHGH had both angiotensin-I-converting enzyme (ACE) inhibition activity (IC50: 243.36 and 321.94 μmol/L, respectively) and Zinc-chelating ability (14.85 and 0.32 mg/g, respectively). The inhibition kinetics demonstrated that QYVPF and GYHGH were both uncompetitive inhibitors of ACE. Molecular docking showed that QYVPF and GYHGH could bind, respectively, three and five active residues of ACE with short hydrogen bonds (but not belonging to any central pocket). QYVPF and GYHGH could bind, respectively, twenty-two and eleven residues through hydrophobic interactions. Moreover, GYHGH was able to affect zinc tetrahedral coordination in ACE by interacting with His383. The inhibition activities of QYVPF and GYHGH toward ACE were relatively resistant to gastrointestinal digestion. GYHGH improved zinc solubility in the intestines (p > 0.05) because its amino and carboxyl groups were chelating sites for zinc ions. These results suggest the potential applications of naked oat peptides for potential antihypertension or zinc fortification.

Food processing to reduce antinutrients in plant-based foods

Antinutrients such as phytic acids, tannins, saponin, and enzyme inhibitors are phytochemicals that can decrease the bioavailability of micro- and macronutrients, thus causing them to be unavailable for absorptions in the digestive system. Antinutrients are a major concern especially in countries where plant-based commodities such as wheat, legumes, and cereals are staple foods, for the antinutrients can cause not only mineral deficiencies, but also lead to more serious health issues. Although various thermal and non-thermal processing methods such as cooking, boiling, and fermentation processes have been practiced to decrease the level of antinutrients, these processes may also undesirably influence the final products. More advanced practices, such as ozonation and cold plasma processing (CPP), have been applied to decrease the antinutrients without majorly affecting the physicochemical and nutritional aspects of the commodities post-processing. This review will cover the types of antinutrients that are commonly found in plants, and the available processing methods that can be used, either singly or in combination, to significantly decrease the antinutrients, thus rendering the foods safe for consumption.

Investigating the Effect of Supercritical Carbon Dioxide Treatment on the Rheological, Thermal, and Functional Properties of Plum (Prunus domestica L.) Kernel Protein Isolates

Plum kernels are a promising source of dietary proteins that are irretrievably lost during processing. The recovery of these underexploited proteins could be eminently vital for human nutrition. Plum kernel protein isolate (PKPI) was prepared and exposed to a targeted supercritical carbon dioxide (SC-CO₂) treatment to diversify its effectiveness in industrial applications. The impacts of SC-CO₂ treatment at different processing temperatures (30-70 °C) on dynamic rheology, microstructure, thermal, and techno-functional characteristics of PKPI were investigated. The results revealed that the dynamic viscoelastic characteristics of SC-CO₂-treated PKPIs showed higher storage modulus, loss modulus, and lower tan δ value than native PKPI, indicating greater strength and elasticity of the gels. Microstructural analysis showed that the proteins experienced denaturation at elevated temperatures and resulted in the formation of soluble aggregates, which increased the heat requirement for thermal denaturation of SC-CO₂-treated samples. SC-CO₂-treated PKPIs demonstrated a decline of 20.74% and 30.5% in crystallite size and crystallinity. PKPIs treated at 60 °C showed the highest dispersibility, which was 1.15-fold higher than the native PKPI sample. SC-CO₂ treatment offers a novel path to improve the techno-functional properties of PKPIs and extend its use in food and non-food applications.

Millet bran protein hydrolysates derived peptides-zinc chelate: Structural characterization, security prediction in silico, zinc transport capacity and stability against different food processing conditions

A novel peptide Ser-Asp-Asp-Val-Leu (SDDVL) of excellent zinc-chelating capacity (13.77 mg/g) was identified in millet bran protein hydrolysates. In silico prediction demonstrated that SDDVL had no potential toxicity. The results of structural characterization demonstrated that both amino group and carboxyl group of SDDVL were the primary zinc-chelating sites. Moreover, SDDVL-zinc chelate showed higher stability (p < 0.05) than ZnSO₄ and zinc gluconate under different processing conditions including most pasteurization conditions, heating at 100°C for 10-50 min, various pH values (8.0-10.0), treatment of glucose (4-8 g/100 g) or NaCl (1-4 g/100 g), and simulated gastrointestinal digestion. In addition, SDDVL-zinc chelate showed higher zinc transport capacity than ZnSO₄ and zinc gluconate in Caco-2 cells (p < 0.05). These results suggested that millet bran peptide had a positive effect on the gastrointestinal stability and bioavailability of Zn, and SDDVL-zinc chelate could be used as ingredient of zinc supplements. PRACTICAL APPLICATION: The current study provided a practical method to identify peptides of excellent zinc-chelating capacity from millet bran protein hydrolysates. This study demonstrated that in silico prediction assisted with suitable database was a fast, practical, and economic way to evaluate the security and to analysis the physicochemical properties of novel peptides. Moreover, it provided an efficient method to assess the stability of peptide-zinc chelate under different food processing conditions, which was the theoretical basis for utilization of peptide as ingredient of zinc fortifications.

Valorization of green biomass Azolla pinnata fern: multi-parameter evaluation of processing conditions on protein extractability and their influence on the physicochemical, structural, techno-functional properties and protein quality

BACKGROUND

This study determined the effect of processing conditions on protein extractability from Azolla pinnata fern, and their influence on the physicochemical, structural, techno-functional properties and protein quality.

RESULTS

The protein extraction from A. pinnata fern was optimized through response surface methodology obtaining a maximum yield of 18.93% with a recovery rate of 73.66%. The A. pinnata fern protein concentrate (AFPC) had five protein bands with a molecular weight ranging from 17 to 56 kDa. AFPC contained high β-sheet structure (36.61%), favouring its good thermal properties with three endothermic peaks at 54.28, 86.52 and 166.25 °C. The AFPC scored ≥ 1 for all essential amino acids, except for lysine and histidine. The AFPC exhibited exceptionally high techno-functional properties, particularly for water holding (5.46 g g^-1 ) and fat absorption capacity (10.08 g g^-1 ), and gelling properties (5% gelation concentration). The AFPC had high in vitro digestibility of 73%, signifying its high availability for human consumption.

CONCLUSION

The underexploited A. pinnata fern is a potential source of edible protein, thus a promising nutraceutical or ingredient of functional and health-promoting foods. © 2022 Society of Chemical Industry.

Pentapeptide-Zinc Chelate from Sweet Almond Expeller Amandin Hydrolysates: Structural and Physicochemical Characteristics, Stability and Zinc Transport Ability In Vitro

To promote the application of almond expellers, sweet almond expeller globulin (amandin) was extracted for the preparation of bioactive peptides. After dual enzymatic hydrolysis, Sephadex G-15 gel isolation, reverse-phase high-performance liquid chromatography purification and ESI-MS/MS analysis, two novel peptides Val-Asp-Leu-Val-Ala-Glu-Val-Pro-Arg-Gly-Leu (1164.45 Da) and Leu-Asp-Arg-Leu-Glu (644.77 Da) were identified in sweet almond expeller amandin hydrolysates. Leu-Asp-Arg-Leu-Glu (LDRLE) of excellent zinc-chelating capacity (24.73 mg/g) was selected for preparation of peptide-zinc chelate. Structural analysis revealed that zinc ions were mainly bonded to amino group and carboxyl group of LDRLE. Potential toxicity and some physicochemical properties of LDRLE and Val-Asp-Leu-Val-Ala-Glu-Val-Pro-Arg-Gly-Leu (VDLVAEVPRGL) were predicted in silico. The results demonstrated that both LDRLE and VDLVAEVPRGL were not toxic. Additionally, zinc solubility of LDRLE-zinc chelate was much higher than that of zinc sulphate and zinc gluconate at pH 6.0−10.0 and against gastrointestinal digestion at 37 °C (p < 0.05). However, incubation at 100 °C for 20−60 min significantly reduced zinc-solubility of LDRLE-zinc chelate. Moreover, the chelate showed higher zinc transport ability in vitro than zinc sulphate and zinc gluconate (p < 0.05). Therefore, peptides isolated from sweet almond expeller amandin have potential applications as ingredient of zinc supplements.

Cereal bar functionalised with non-conventional alfalfa and dhaincha protein isolates: quality characteristics, nutritional composition and antioxidant activity

The utilization of conventional protein sources like gluten, soy, dairy proteins, and nuts in the development of protein-enriched cereal bars presents a challenge for their consumption by the population suffering from celiac and other food protein allergies. In the present investigation, protein-rich cereal bars were developed using non-conventional protein isolates (alfalfa and dhiancha (API & DPI) and were evaluated for their quality attributes, nutritional composition, and bioactive potential. The incorporation of protein isolates increased the weight, density, and non-enzymatic browning and decreased the water activity in the bars. The hardness of the bar increased with the addition of protein isolates; however, reduced hardness was observed at 7.5 and 10% levels of API. Supplementation with protein isolates enhanced the protein content (7.83-16.71%), total phenols (1642-4956 GAE μg/g), total flavonoids (268-984 QE μg/g), DPPH radical scavenging activity (96.38-114.82 TEAC μmol/100 g) and reducing power (1926-3586 AAE μg/g) of the bars. Cereal bars maintained good sensory score and overall acceptability at 10 and 5% level of incorporation of API and DPI respectively.

Combination of Medium- and High-Pressure Liquid Chromatography for Isolation of L-tryptophan (Q-marker) from Medicago sativa Extract

Medicago sativa (alfalfa) is a widely used animal feed. However, its quality has been difficult to control due to the lack of appropriate marker compounds. Therefore, it is very necessary to select an appropriate quality marker (Q-marker) to control its quality. In this study, medium-pressure liquid chromatography and high-pressure liquid chromatography were employed to effectively prepare the separation of the Q-marker (L-tryptophan) from Medicago sativa. Firstly, using MCI GEL® CHP20P as the stationary phase, 2.5 g of the target fraction Fr3 was enriched from crude Medicago sativa extract (2.9 kg) by medium-pressure liquid chromatography. Secondly, Sephadex LH-20 was used to further separate Fr3 fractions, and the Fr34 fraction (358.3 mg) was enriched after 14 repetitions. Lastly, using the ReproSil-Pur C18 AQ preparative column, 63.4 mg of L-tryptophan was obtained by high-pressure liquid chromatography, and the purity was above 95%. The results showed that medium-pressure liquid chromatography (MCI GEL® CHP20P and Sephadex LH-20) combined with high-pressure liquid chromatography (ReproSil-Pur C18 AQ) could be used to effectively prepare the Q-marker from natural products with satisfactory purity.

A Novel Antihypertensive Pentapeptide Identified in Quinoa Bran Globulin Hydrolysates: Purification, In Silico Characterization, Molecular Docking with ACE and Stability against Different Food-Processing Conditions

The addition of food derived antihypertensive peptides to the diet is considered a reasonable way to prevent and lower blood pressure. However, data about stability of antihypertensive peptides against different food-processing conditions are limited. In this study, through Sephadex G-15 gel chromatography and RP-HPLC separation, UPLC-ESI-MS/MS analysis and in silico screening, a novel ACE-inhibitory pentapeptide Ser-Ala-Pro-Pro-Pro (IC₅₀: 915.03 μmol/L) was identified in quinoa bran globulin hydrolysate. The inhibition patterns on angiotensin-I-converting enzyme and safety of SAPPP were studied using molecular docking and in silico predication, respectively. Results demonstrated that SAPPP could noncompetitively bind to active sites PRO519 and SER461 of ACE through short hydrogen bonds. SAPPP was resistant to different pH values (2.0–10.0), pasteurization conditions, addition of Na⁺, Mg²⁺, Fe³⁺ or K⁺, and the simulated gastrointestinal digestion. In contrast, SAPPP was unstable against heating at 100 °C for more than 50 min and the treatment of Zn²⁺ (5 mmol/L). These results indicated that peptides derived from quinoa globulin hydrolysates can be added into foods for antihypertension.

Two Novel Antihypertensive Peptides Identified in Millet Bran Glutelin-2 Hydrolysates: Purification, In Silico Characterization, Molecular Docking with ACE and Stability in Various Food Processing Conditions

The addition of food-derived antihypertensive peptides to the diet is considered a reasonable antihypertension strategy. However, data about the stability of antihypertensive peptides in different food processing conditions are limited. In this study, through Sephadex G-15 gel chromatography and RP-HPLC separation, UPLC–ESI–MS/MS analysis and in silico screening, two novel ACE-inhibitory peptides, Pro-Leu-Leu-Lys (IC₅₀: 549.87 μmol/L) and Pro-Pro-Met-Trp-Pro-Phe-Val (IC₅₀: 364.62 μmol/L), were identified in millet bran glutelin-2 hydrolysates. The inhibition of angiotensin-I converting enzyme and the potential safety of PLLK and PPMWPFV were studied using molecular docking and in silico prediction, respectively. The results demonstrated that PLLK and PPMWPFV could non-competitively bind to one and seven binding sites of ACE through short hydrogen bonds, respectively. Both PLLK and PPMWPFV were resistant to different pH values (2.0–10.0), pasteurization conditions, addition of Na⁺, Mg²⁺ or K⁺ and simulated gastrointestinal digestion. However, PLLK and PPMWPFV were unstable upon heat treatment at 100 °C for more than 20 min or treatment with Fe³⁺ or Zn²⁺. In fact, treatment with Fe³⁺ or Zn²⁺ induced the formation of PLLK–iron or PLLK–zinc chelates and reduced the ACE-inhibitory activity of PLLK. These results indicate that peptides derived from millet bran could be added to foods as antihypertension agents.

A Tomato Pomace Enriched Gluten-Free Ready-to-Cook Snack’s Nutritional Profile, Quality, and Shelf Life Evaluation

Attempts were undertaken to design a quick ready-to-cook gluten-free snack utilizing finger millet and potato flour (50:50) as well as tomato pomace due to the restricted availability of gluten-free snack goods in the Indian market. The nutritional content of the food and its general acceptability, cooking characteristics, and storage stability were all tested. The addition of tomato pomace had a distinct influence on the product’s color and hardness. Additionally, it resulted in a significant reduction in the amount of oil used, cooking loss, and frying time required. With a high acceptance level, the snack supplemented with 10% tomato pomace was determined to be the most optimal formulation. When the same substance was subjected to FTIR analysis, it was discovered that it retained all the important functional groups required for sustaining antioxidant activity. It also displayed high storage stability, a desirable overall acceptance score, and a very promising nutritional profile, all of which would benefit the product’s end users.

Structural, functional and proteomic differences of proteins extracted from white garlic and Laba garlic

Protein is one of the main nutrients in garlic with multiple functions and healthy effects. The aim of this study was to investigate the effects of greening process on the functional and structural properties of garlic protein, and proteomic strategy was applied to analyze the changes of protein compositions as well as their activities. Results showed that the manufacturing process led to a smaller isoelectric point (pI) and larger particle size of garlic protein (Laba garlic protein, LP) compared to the unprocessed one (untreated white garlic protein, WP). Circular dichroism (CD) and fourier-transform infrared spectroscopy (FTIR) spectra showed that the dominant α-helix structure was lost and became random coil in LP. The surface hydrophobicity was also decreased after processing. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed that molecular weight distributions of WP varied from 10 to 80 kDa but those of LP were in 10 to 25 kDa. In the functional property analysis, greening process resulted in poor emulsifying ability for WP at pH 7.2, but led to an increase in water holding capacity (WHC). The proteomic analysis indicated that WP had numerous kinds of proteins and the vital alliinase in WP was lost in LP, and only 6 types of proteins were reserved. The proteins in WP were presumably degraded into peptides in LP. This study firstly applied proteomic analysis to investigate the protein differences in garlic processing, and based on the significant properties difference, WP might be a promising agent for additives in food industry, while LP might be a potential source for bioactive peptides extraction and separation.

Functional Properties of Physically Pretreated Kidney Bean and Mung Bean Flours and Their Performance in Microencapsulation of a Carotenoid-Rich Oil

Microencapsulation can improve protection for compounds that degrade easily, such as β-carotene that is present in large amounts in buriti oil (Mauritia flexuosa). Encapsulating matrices are mainly composed of proteins and polysaccharides, which are often combined to improve their performance as a protective barrier. Beans, such as dark red kidney beans (Phaseolus vulgaris) and mung beans (Vigna radiata), are excellent protein sources that contain significant amounts of the essential amino acids. Bean flours are low in fat and naturally provide a blend of high-quality protein and carbohydrates that may stabilize lipophilic compounds for subsequent spray-drying. Whole bean flours, rather than refined individual biopolymers, may represent more sustainable alternative wall materials for microencapsulate bioactive compounds. This work aimed to evaluate the use of flours produced from red kidney beans and mung beans, which have been submitted to different physical pretreatments, as wall materials for microencapsulation of buriti oil by spray-drying. Different bean treatments were evaluated: untreated (control), soaked in water for 24 h, and soaked in water for 24 h followed by boiling for 30 min. The flours' proximate composition was not affected by the treatments (p &lt; 0.05), showing similar values of carbohydrate (63.8–67.9%), protein (19.2–24.6%), and lipid (1.2–1.9%) contents. Both bean species had the water absorption capacity (WAC) increased by boiling, while the oil absorption capacity (OAC) was not altered by the treatments. Flours produced with raw or soaked beans showed emulsion activity (EA) and emulsion stability (ES) greater than 70%. Raw bean flours also showed better foaming properties, which may be indicative of higher levels of antinutritional factors. The soaked bean flours showed the best results for both type of beans, especially with regard to emulsifying properties, and were selected as wall materials for buriti oil microencapsulation. Different ratios of flour and maltodextrin were used to produce oil-in-water emulsions that were then spray-dried. Buriti oil microcapsules showed good physicochemical properties, with moisture around 3%, aw &lt;0.3, and hygroscopicity around 5%. The carotenoid encapsulation efficiency ranged from 68.2 to 77.9%. Bean flours showed to function as a sustainable and nutrient-rich alternative wall material for microencapsulation.

A detailed comparative investigation on structural, technofunctional and bioactive characteristics of protein concentrates from different common bean genotypes

In this study, a comparative investigation on the structural, technofunctional and bioactive properties of protein concentrates from different common bean genotypes was performed. Protein extractions were carried out at different pH and salt concentrations and the highest protein content for the concentrates (77.7%) was determined for pH 11 and 0.4% of salt. The protein content of the common bean flour and their protein concentrates was in the range of 22-26.93% and 72.97-77.99%, respectively. For bioactive properties, total phenolic content ranged between 578.9 and 1355.9 and 313.5-1219.1 mg GAE/kg, for bean flours and protein concentrates, respectively. Two genotypes (G7 and G8) were the samples showing the superior biofunctional properties compared to the others. Thermal characterization showed that Td and ΔH values were in the range of 64.95-94.33 °C and 76.64-122.3 j/g, respectively. SDS-PAGE analysis revealed that the major band corresponded to the 7S vicilin. Principal component analysis showed that G2 and G6 had different characteristics in terms of technofunctional parameters while G7 and G8 were differed from the other genotypes in terms of bioactivity. The results showed that the proteins of common beans could be evaluated as good source due to high bioactivity for the enrichment of food formulations.

Modification of functional properties of perilla protein isolate by high-intensity ultrasonic treatment and the stability of o/w emulsion

This study investigated the effects of ultrasonic treatment on the structural characteristics and functional properties of perilla protein isolate (PPI). Besides, the performance of the emulsions stabilized by ultrasonic-treated PPI was analyzed, aiming at exploring the potential mechanism of ultrasonic technology to improve emulsion stability. Results showed that ultrasonic treatment reduced the particle size, induced the exposure of hydrophobic groups and changes in the secondary structure and tertiary conformation of PPI. However, the molecular weight and the crystalline regions were remained unchanged. Apart from this, ultrasonic treatment improved the solubility, water/oil holding capacity, foaming and emulsifying capacity of PPI. Furthermore, the emulsions prepared by ultrasonic-treated PPI possessed the highest stability, which might be due to the smaller droplets size and reduced droplets attraction by higher proportion of interfacial adsorbed protein. This findings will provide a new insight into the application of ultrasonic to improve the stability of PPI-stabilized emulsions.

Effect of Thermal and Non-Thermal Processing on the Nutritional Composition, Pasting Profile and Protein Secondary Structure of Alfalfa

Alfalfa is an unconventional alternative legume and its potentiality for utilization can be improved by processing. In this study, alfalfa seeds were processed by different thermal and non-thermal techniques and evaluated for their physical properties, colour characteristics, nutritional composition, pasting profile and protein secondary structure. The results were analyzed using Principal Component Analysis to elucidate the effect of processing. Colour of the flour was more affected by thermal processing in comparison to non-thermal processing. Nutritional composition of alfalfa flour was significantly affected by germination as compared to other methods and germinated flour showed an increase in the protein content. All the processing treatments resulted in improving the pasting properties except for germination. Particularly, marked improvement in the pasting properties was observed by wet heat processing and soaking. ATR-FTIR exhibited change in the secondary structure of the protein as a result of processing and showed the dominance of intermolecular β-sheets in extrusion, germination and microwave treated flour and formation of anti-parallel β-sheets after dry heat processing. Wet heat processing and soaking treatment can be employed for alfalfa for enhancing its techno-functionality.