Adsorption and desorption characteristics of a phenolic compound from Ecklonia cava on macroporous resin

Macroporous Resin Recovery of Antioxidant Polyphenol Compounds from Red Onion (Allium cepa L.) Peel

In this study, polyphenols in the crude extract (CE) from red onion peel were recovered by macroporous resin, and their antioxidant and anti-inflammatory activities were evaluated. Among the four resins screened (SP850, XAD2, XAD7HP, and XAD16N), XAD7HP showed the highest desorption and recovery ratios, and it was used to optimize polyphenol recovery through single-factor experiments. The optimal conditions were established as 1 g resin, pH 4, 25 °C, 7 h for adsorption, followed by desorption with 70% ethanol for 1 h at 25 °C. These conditions achieved 85.00% adsorption ratio, 87.10% desorption ratio, and 20.9% yield of the macroporous resin-recovered extract (MRE) from the CE. HPLC analysis revealed that rosmarinic acid, quercetin, and myricetin were major compounds in the MRE, with the content of these compounds higher (about 7-fold) compared to the CE, confirming enhanced recovery of polyphenols by macroporous resin. Moreover, FT-IR and ¹H-NMR analysis confirmed the successful recovery of these polyphenol compounds in the MRE. Furthermore, the MRE displayed significantly improved antioxidant activities (DPPH, ABTS, and FRAP) and anti-inflammatory activities (inhibition of nitric oxide synthesis and reactive oxygen species production) compared to the CE. In summary, our findings suggest that macroporous resin can effectively recover polyphenol compounds from red onion peel extract and enhance their biological activities.

Enrichment of deoxynojirimycin in mulberry using cation exchange resin: Adsorption/desorption characteristics and process optimization

Deoxynojirimycin (DNJ) is an α-glucosidase inhibitor with high food values. However, the complex and costly enrichment processes have greatly prevented its application. Herein, this study aimed to propose a simple and efficient enrichment process for DNJ from Morus alba L. extracts using cation exchange resins. The LSI and D113 resins were chosen due to their excellent adsorption and desorption properties. The adsorption characteristics agreed with the pseudo-first-order kinetic model and the Langmuir isotherm model. This adsorption was chemisorption, spontaneous, endothermic and entropy-driven. Furthermore, the concentration and pH of the extracts, desorption solvent, breakthrough and elution curves, sample loading and elution rate were investigated to optimize the enrichment process by resin column chromatography. The results also showed that the purity of DNJ was improved to 44.00 % with a total recovery of 78.21 % using the LSI-D113 combination strategy. This research demonstrated the industrial feasibility of DNJ enrichment using cation exchange resins.

Tailored NADES solvents for the extraction optimization of benzylisoquinoline alkaloids from Thalictrum foliolosum DC.- A potential phyto-nutraceutical source

From a perspective focused on phyto-nutraceuticals, alkaloids are considered to be the most significant metabolites, as they exhibit a broad range of pharmacological applications. Therefore, it is essential, to conduct a thorough investigation of the extraction techniques employed and to optimize the overall process. Considering this, we delved into tailor-made natural deep eutectic solvents coupled with ultrasonic-assisted extraction and macroporous resins aided recovery of therapeutics alkaloids from Thalictrum foliolosum DC. The extraction parameters including duty cycle (X1), extraction time (X2), water content (X3), and liquid-to-solid ratio (X4) were optimized through response surface methodology. Under the optimal extraction conditions [duty cycle- 61 %, ultrasonication extraction time- 10.35 min, water content- 30.51 %, and liquid-to-solid ratio- 30 mL/g], the yield of berberine (11.91 ± 0.12 mg/g DW), berbamine (11.85 ± 0.16 mg/g DW), magnoflorine (6.06 ± 0.05 mg/g DW), and palmatine (2.53 ± 0.015 mg/g DW) were found to be near the model prediction. Further, adsorption/desorption characteristics were investigated, and the results highlight AB-8 resin as most effective for the recovery of berberine and palmatine, while, XAD-7HP resin is best suited for berbamine and magnoflorine. FT-IR analysis shows similar spectra among the purified extracts with significantly (p < 0.05) higher antioxidant and anti-glycemic activities. In conclusion, the developed method complies with the criteria of green extraction which can be harnessed as a natural antioxidant in pharmaceutical and nutraceutical industries.

Continuous chromatography system with 6-zone and 18-column dynamic tandem connection technique for the enrichment of total flavonoids from Epimedium koreanum Nakai

Natural flavonoids have been shown to have many pharmacological activities. Efficient and continuous enrichment of total flavonoids with high content and low mobile phase usage from complex natural products is greatly needed at the moment. In this study, a new continuous chromatography system (CCS) with 6 zones and the 18-column dynamic tandem connection technique was developed and used to enrich total flavonoids from Epimedium koreanum Nakai (EKN). The 18 columns were divided into 6 zones, and the principle of a dynamic series of three columns was adopted for each zone to achieve continuous automatic separation and enrichment of total flavonoids under the control of a logic control valve. The CCS separation conditions were established based on single-column chromatography and a theoretical calculation model of the CCS. By means of the self-designed device and method, 485.11±3.16 g of total flavonoids were isolated from 16.2 kg of EKN. It is worth noting that the total content of 18 types of flavonoids in the samples enriched by the CCS was increased from 2.84±0.07% to 88.29±0.22%, the total recovery rate was 92.20±0.38%, and the RSD of each flavonoid was less than 5.0%. Furthermore, compared with single-column chromatography filled with the same volume of chromatography filler, the entire process saved about 2/3 of the mobile phase usage. In summary, the developed device and method could efficiently and continuously enrich total flavonoids from EKN with high-content and low mobile phase usage and would have a wide application prospect in the separation and enrichment of natural products.

Total triterpenoids from apple peels exert pronounced anti-breast-cancer activity in vivo and in vitro

BACKGROUND

Apples are among the most nutritionally valuable fruits and have a history of use in traditional Chinese medicine. Triterpenoids, the primary bioactive compounds found in apples, demonstrate significant antitumor activity.

RESULTS

Following enrichment and optimization, the total content of major triterpenoids in total triterpenoids from apple peels (ATT) reached 5.76 g kg-1. The growth of MDA-MB-231 xenograft tumors was significantly inhibited after treatment with ATT. Network pharmacology analysis conclusively identified a close association between the antitumor effect of ATT and the phosphatidylinositol 3-kinase-protein kinase B (PI3K-Akt) signaling pathway. Experimental validation using MDA-MB-231 cells and a xenograft nude mouse model confirmed that ATT suppressed tumor cell proliferation effectively by modulating the PI3K-Akt signaling pathway, which was consistent with the findings from network pharmacology. The total triterpenoids from apple peels also induced cell apoptosis by mediating the PI3K-Akt signaling pathway.

CONCLUSION

The total triterpenoids from apple peels can inhibit tumor cell proliferation and induce cell apoptosis effectively through the PI3K-Akt signaling pathway, suggesting that ATT holds promise as a prospective therapeutic agent for breast cancer treatment. © 2024 Society of Chemical Industry.

Fine-Tuning Porous Structure of Zirconium-Based Metal-Organic Frameworks for Efficient Separation and Purification of Astaxanthin by Defect Engineering

Efficient separation of bioactive compounds from nature source, particularly that of astaxanthin (AXT), remains challenging due to their low content in complicated matrix and readily degradable structure. Herein, a modulator-induced defect engineering is presented on the stable zirconium-based metal-organic frameworks (Zr-MOFs) to optimize pore size and pore chemistry for the efficient separation and purification of AXT for the first time. High adsorption capacity of 26.21 mg g-1 is achieved on the best-performing defect Zr-MOF (d-UiO-67-4), superior over the other reported adsorbent for AXT. Meanwhile, d-UiO-67-4 exhibits the selective adsorption of AXT over other carotenoids analogues with similar structure and properties. This is attributed to the preferential non-covalent interactions between defect framework and AXT revealed by the spectroscopy analysis and density functional theory (DFT) calculations. High purity of AXT with 89.0% ± 2.3% extraction efficiency can be realized after the purification of AXT by d-UiO-67-4. The practical separation performance of d-UiO-67-4 for AXT extracted from Haematococcus pluvialis is demonstrated by fixed-bed column-based dynamic adsorption and desorption experiments. This work broadens the preparation methods for thermosensitive active substances and provided new research ideas for the controlled adsorption of functional food factors.

NADES-based extraction optimization and enrichment of Cyanidin-3-O-galactoside from Rhododendron arboreum Sm.: Kinetics and thermodynamics insights

Cyanidin-3-O-galactoside (Cy3-gal) is the most widespread anthocyanin that has been found to be applicable to nutraceutical and pharmaceutical ingredients. Nevertheless, the process of separation and purification, susceptibilities to heat, and pH inactivation present some limitations. In the present study, natural deep eutectic solvents (NADES) with an ultrasonic-assisted extraction method were briefly studied, and the recovery of Cy3-gal from Rhododendron arboreum was highlighted. The NADES, consisting of choline chloride and oxalic acid (1:1), was screened out as an extractant, and single-factor experiments combined with a two-site kinetic model were employed to describe the extraction process. Further, the work investigated ultrasound-assisted adsorption/desorption to efficiently purify Cy3-gal using macroporous resins. The optimal extraction conditions to attain maximum Cy3-gal yield was 30% water in a 50:1 (mL/g) solvent-to-sample ratio, 11.25 W/cm3 acoustic density, and 50% duty cycle for 16 min of extraction time. Under these conditions, the results revealed 23.07 ± 0.14 mg/g of Cy3-gal, two-fold higher than the traditional solvents. Furthermore, of the different resins used, Amberlite XAD-7HP showed significantly (p < 0.05) higher adsorption/desorption capacities (12.82 ± 0.18 mg/g and 10.97 ± 0.173 mg/g) and recovery (48.41 ± 0.76%) percent over other adsorbents. Experiments on the degrading behavior (40-80 °C) of the recovered Cy3-gal were performed over time, and the first-order kinetic model better explained the obtained data. In conclusion, the study asserts the use of ultrasonication with NADES and XAD-7HP resin for the improved purification of Cy3-gal from the crude extract.

Target-specific affinity separation of the bioactive compounds from herbal extract using the spin column packed with the immobilized protein microspheres prior to LC-MS analysis

Excellent pretreatments before instrumental analysis are critical for separation and determination of target compounds for discovery of new drugs from herb medicines. We developed a rapid and highly-selective method to separate the bioactive compounds from herbal extract using protein affinity-selection spin column, which was packed with the new sorbent materials from integrating the recombinant β2-adrenoceptor (β2-AR) directly out of cell lysates onto the surface of microspheres. Protein affinity-selection spin column was placed in a centrifugal tube, where after the non-specific binders were released to the filtrate under the operational centrifugation, the specific binders on the spin column were cleaned with a washing solvent for LC-MS analysis. The known agonists of β2-AR were retained/released on protein affinity-selection spin column but not on control column, demonstrating the method with good recovery (79.4∼95.7 %) and high repeatability (RSD < 3.5 %). The adsorption features of three ligands on the spin column were described best by Prism saturation binding model, and the high-affinity binding and the large binding capacity of the spin column make it feasible to trap the trace analytes effectively. It was applied in separating bioactive compounds from Alstoniae Scholaris extract, two of which were identified as picrinine and oleanolic acid in combination with LC-MS and verified as the potential agonists towards β2-AR though molecular docking and cell experiments. Our study demonstrated that, the spin column with the immobilized protein sorbents in the centrifugal filter device represents a promising tool, enabling rapid and target-specific affinity separation of the bioactive compounds from herbal extract.

A review of the polyphenols purification from apple products

Apple polyphenols are one of the major bioactive compounds in apple products and have strong anti-inflammatory effects and the ability to prevent chronic diseases with health benefits. The development of apple polyphenol products is dependent on the extraction, purification and identification of apple polyphenols. The extracted polyphenols need to be further purified to improve the concentration of the extracted polyphenols. This review, therefore, presents the studies on the conventional and novel methods for polyphenols purification from apple products. The different chromatography methods, as one of the most widely used conventional purification methods, for polyphenol purification from various apple products are introduced. In addition, the perspective of the adsorption-desorption process and membrane filtration technique in enhancing the purification of polyphenols from apple products are presented in this review. The advantages and disadvantages of these purification techniques are also discussed and compared in depth. However, each of the reviewed technologies has some disadvantages that need to be overcome, and some mechanisms need to be further identified. Therefore, more competitive polyphenols purification techniques need to emerge in the future. It is hoped that this review can provide a research basis for the efficient purification of apple polyphenols, which can facilitate their application in various fields.

A green and simple method for enrichment of major diterpenoids from the buds of Wikstroemia chamaedaphne with macroporous resins and their activation of latent human immunodeficiency virus activity

In this study, a green and efficient enrichment method for the four majors active diterpenoid components: pimelotide C, pimelotide A, simplexin, and 6α,7α-epoxy-5β-hydroxy-12-deoxyphorbol-13-decanoate in the buds of Wikstroemia chamaedaphne was established using macroporous resin chromatography. The adsorption and desorption rates of seven macroporous resins were compared using static tests. The D101 macroporous resin exhibited the best performance. Static and dynamic adsorption tests were performed to determine the enrichment and purification of important bioactive diterpenoids in the buds of W. chamaedaphne. Diterpenoid extracts were obtained by using D101 macroporous resin from the crude extracts of W. chamaedaphne. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis demonstrated that most of the diterpenoids were enriched in diterpenoid extracts. These results confirmed that diterpenoids in the buds of W. chamaedaphne could be enriched using macroporous resin technology, and the enriched diterpenoid extracts showed more efficient activation of the latent human immunodeficiency virus. This study provides a novel strategy for discovering efficient and low-toxicity latency-reversing agents and a potential basis for the comprehensive development and clinical application of the buds of W. chamaedaphne.

Enrichment of Total Flavonoids and Licochalcone A from Glycyrrhiza inflata Bat. Residue Based on a Combined Membrane-Macroporous Resin Process and a Quality-Control Study

Glycyrrhiza inflata Bat. produces a lot of licorice waste after water extraction, which also retains abundant total flavonoids (TFs) and licochalcone A. However, licorice residue is often wasted due to the lack of good utilization of resources in practical applications. This study first screened the optimal membrane pore size and resin type and then explored the mechanism and conditions of the adsorption of TFs on the resin. Then, different combinations and sequences of membrane and macroporous resin (MR) methods were investigated. It was found that using the membrane method for initial purification, followed by the MR method for further purification, yielded the best purification results. Next, response surface methodology was utilized to investigate the resin's dynamic desorption conditions for TFs. Finally, the TF purity increased from 32.9% to 78.2% (2.38-fold) after purification by a combined membrane-MR process; the purity of licochalcone A increased from 11.63 mg·g-1 to 22.70 mg·g-1 (1.95-fold). This study verified the feasibility of enriching TFs and licochalcone A from licorice residue using a membrane-MR coupling method. In addition, a quality-control method was established using a fingerprinting method on the basis of ultrahigh-performance liquid chromatography (UPLC) to ensure the stability of the enrichment process.

One-step enrichment of phenolics from Chaenomeles speciosa (Sweet) Nakai fruit using macroporous resin: Adsorption/desorption characteristics, process optimization and UPLC-QqQ-MS/MS-based quantification

Chaenomeles speciosa (Sweet) Nakai fruit is a good source of phenolics with many health benefits. In this work, the enrichment of C. speciosa fruit total phenolics (CSFTP) using macroporous resins was studied. NKA-Ⅱ resin was selected for enriching CSFTP due to its highest adsorption/desorption quantity. Adsorption characteristics of CSFTP on NKA-Ⅱ resin exhibited a good fit with the Langmuir isotherm model and pseudo-second order kinetics model. This adsorption was spontaneous, exothermic, and entropy-decreasing through a physisorption mechanism. The breakthrough-elution curves were studied to optimize CSFTP enrichment conditions. One-step enrichment increased CSFTP content in the extracts from 26.51 % to 78.63 %, with a recovery of 81.03 %. A UPLC-QqQ-MS/MS method in multiple reaction monitoring (MRM) mode was established and validated for the simultaneous quantification of seven phenolic compounds. This study demonstrates the feasibility of industrial enrichment of CSFTP using NKA-Ⅱ resin and proposes a reliable method for quality control of CSFTP-rich products.

Precise evaluation of batch adsorption kinetics of plant total polyphenols based on a flow-injection online spectrophotometric method

Efficient evaluation of adsorption kinetics of plant total polyphenols is essential for the design of adsorption separation of bioactive compounds. The conventional method uses manual sampling with poor reproducibility. Here, we developed a new method for on-line determination of total polyphenol content (TPC) in plant extracts by applying the Folin-Ciocalteu method in flow-injection analysis (FIA). The FIA parameters were optimized and a standard curve with excellent linearity was established. Precise determination of TPC with a satisfactory sample throughput of 20 h-1 was achieved for the adsorption kinetic study. The pseudo-second-order kinetic model was found to better describe the kinetic parameters of the batch adsorption/desorption process. The developed method proved to be accurate compared with the conventional method. The FIA method holds significant promise for studying and monitoring adsorption processes, due to its automatic on-line nature, low consumption of reagents and samples, and the ability to generate large quantities of highly accurate adsorption data.

Solid-phase extraction with the functionalization of calcium-sensing receptors onto magnetic microspheres as an affinity probe can capture ligands selectively from herbal extract

Magnetic solid phase extraction with the functionalization of protein onto micro- or nano-particles as a probe is favorable for the discovery of new drugs from complicated natural products. Herein, we aimed to develop a rapid method by immobilizing halogenated alkane dehalogenase (Halo)-tagged calcium-sensing receptor (CaSR) directly out of crude cell lysates onto the surface of magnetic microspheres (MM) with no need to purify protein. Thereby we achieved CaSR-functionalized MM for revealing adsorption characteristics of agonist neomycin and screening ligands from herbal medicine Radix Astragali (RA). About 43.87 mg CaSR could be immobilized per 1 g MM within 30 min, and the acquired CaSR-functionalized MM showed good stability and activity for 4 weeks. The maximum adsorption capacity of neomycin on CaSR-functionalized MM was determined as 4.70 × 10-4 ~ 3.96 × 10-4 mol/g within 277 ~ 310 K, and its adsorption isotherm characteristics described best by the Temkin model were further validated using isothermal titration calorimetry. It was inferred that CaSR's affinity for neomycin was driven by electrostatic forces in a spontaneous process when the system reached an equilibrium state. Moreover, the ligands from the RA extract were screened, three of which were assigned as astragaloside IV, ononin, and calycosin based on HPLC-MS. Our findings demonstrated that the functionalization of a receptor onto magnetic materials designed as an affinity probe has the capability to recognize its agonist and capture the ligands selectively from complex matrices like herbs.

An integrated process by ultrasonic enhancement in the deep eutectic solvents system for extraction and separation of chlorogenic acid from Eucommia ulmoides leaves

This study established an integrated process for the extraction and enrichment of chlorogenic acid(CGA)from Eucommia ulmoides leaves in a deep eutectic solvent system via ultrasonic wave-enhanced adsorption and desorption practices utilizing macroporous resins. Although deep eutectic solvents (DESs) have the advantages of chemical stability, good dissolving capacity, and nonvolatilization, routine solvent recovery operations are not suitable for subsequent separation in this solvent system. Based on the above characteristics, this study integrated the extraction and enrichment processes, in which DESs extracts directly loaded onto the macroporous adsorption resin, avoiding the loss of target components in solvent recovery and redissolution processes. The screening results of solvents and resin types further showed that choline chloride-malic acid (1:1) was the optimal DES, and the NKA-II resin had high adsorption and elution performance for CGA. The viscosities of the DESs were much higher than those of water and conventional organic solvents; thus, the mass transfer resistance was large, which could also affect the adsorption behaviour of the macroporous resin. The thermal and mechanical effects of ultrasound could effectively enhance the efficiency of the mass transfer, adsorption, and desorption in the DES systems. When compared to no sonication treatment, the CGA adsorption at various ultrasonic powers (120-600 W) was examined. At optimal ethanol concentration (60%), the effect of the ultrasonic treatment on the recovery of the DESs (water eluting process) and the desorption capability of CGA were confirmed. The use of three volumes of water elution could recover the DESs without loss of CGA. The adsorption process significantly differed depending on the ultrasonic settings, and the absorption balance time and experimental adsorption capacity at equilibrium were enhanced. Additionally, the adsorption procedure of the NKA-II macroporous resin for CGA under ultrasonic treatment could be clarified by the pseudo second order kinetic equation and the Freundlich isotherm model. Thermodynamic and dynamic parameters indicated that physical adsorption was the main process of the entire procedure, and it was a spontaneous, exothermic, and entropy-reducing physical adsorption process. This study potentially indicates that the use of ultrasonication, as a high-efficiency, environmentally friendly method, can enhance the features of the macroporous resin to better purify target chemicals from a DES extract.

Anthraquinone Removal from Cassia obtusifolia Seed Water Extract Using Baking, Stir-Frying, and Adsorption Treatments: Effects on the Chemical Composition, Physicochemical Properties of Polysaccharides, and Antioxidant Activities of the Water Extract

Safety issues of the controversial anthraquinones from Cassia obtusifolia seed water extracts (CWEs) limit its application. This work aimed to remove the anthraquinones of CWEs by baking treatment (BT), stir-frying treatment (ST), and adsorption treatment (AT). Effects of these treatments on the chemical composition, physicochemical properties of polysaccharides, and antioxidant activities of CWEs were analyzed and compared. Results indicated that AT exhibited the best removal effect on the total anthraquinone among the three treatments. After AT, the contents of rhein, emodin, aloe-emodin, and aurantio-obtusin of the CWE were below the limit of detection. In addition, AT increased the contents of neutral sugars in CWEs in comparison to BT and ST. None of the treatments had an obvious influence on the structural characteristics of polysaccharides. However, AT decreased the antioxidant activity of CWEs due to their lower anthraquinone content. In summary, AT was considered as an efficient and simple method to remove anthraquinones, while retaining the features of polysaccharides.

Sustainable recovery of melanoidins from thermal hydrolyzed sludge by macroporous resin and properties characterization

Melanoidins, the dark-color recalcitrant Maillard reaction by-products in thermal hydrolyzed sludge (THS), cause significant adverse effects on wastewater treatment. This study aimed to develop an efficient adsorption method for recovering melanoidins from THS by macroporous resin. The adsorptive characteristics of six macroporous resins (XAD761, XAD8, XAD16HP, FPX66, HPD-600 and IRA958Cl) showed that XAD761, not yet reported for melanoidins extraction, was the most appropriate with the highest recovery ratio. The adsorption kinetics followed pseudo-second-order model, and the adsorption process was confirmed to be physical, spontaneous, and exothermic, without changing the structure of the adsorbed melanoidins. In the dynamic adsorption, the breakthrough point increased with a decreasing flow rate. After five consecutive regeneration cycles, XAD761 resin maintained stable adsorption efficiency and thus had a good potential for reuse. Furthermore, the physicochemical properties of the extracted THS melanoidins were compared with model melanoidins to lay the foundation for their management, in terms of morphology, molecular weight (MW), and spectrophotometric properties. These results demonstrate that XAD761 resin extraction is a promising sustainable method for practical application in the recovery of melanoidins from THS.

Separation, purification, and crystallization of 1,5-pentanediamine hydrochloride from fermentation broth by cation resin

1,5-Pentanediamine hydrochloride (PDAH) was an important raw material for the preparation of bio-based pentamethylene diisocyanate (PDI). PDI has shown excellent properties in the application of adhesives and thermosetting polyurethane. In this study, PDAH was recovered from 1,5-pentanediamine (PDA) fermentation broth using a cation exchange resin and purified by crystallization. D152 was selected as the most suitable resin for purifying PDAH. The effects of solution pH, initial temperature, concentration of PDA, and adsorption time were studied by the static adsorption method. The equilibrium adsorption data were well fitted to Langmiur, Freundlich, and Temkin-Pyzhev adsorption isotherms. The adsorption free energy, enthalpy, and entropy were calculated. The experimental data were well described by the pseudo first-order kinetics model. The dynamic experiment in the fixed bed column showed that under optimal conditions, the adsorption capacity reached 96.45 mg g-1, and the recovery proportion of the effective section reached 80.16%. In addition, the crystallization of the PDAH solution obtained by elution proved that the crystal product quality of resin eluting solution was highest. Thus, our research will contribute to the industrial scale-up of the separation of PDAH.

HPLC-DAD-MS Identification and Quantification of Phenolic Components in Japanese Knotweed and American Pokeweed Extracts and Their Phytotoxic Effect on Seed Germination

We performed a detailed HPLC-MSn analysis of the phenolic compounds from the extracts of two invasive alien plant species (IAPS): Japanese knotweed (Fallopia japonica (Houtt.) Ronse Decr.) and American pokeweed (Phytolacca americana L.). The major phenolic groups were hydroxycinnamic acids and flavanols in Japanese knotweed (J. knotweed) and flavonols, hydroxycinnamic acids, and stilbenes in American pokeweed (A. pokeweed). We investigated the influence of solvent type and extraction time on the extraction efficiency of the phenolic compounds. The solvent 80% methanol had a higher polyphenolic extraction efficiency than water, since 14.5 times more flavonols and 2.3 times more stilbenes were extracted from J. knotweed and 5.2 times more flavonols and 2.6 times more stilbenes were extracted from A. pokeweed. In contrast, with water, we obtained a 52% higher hydroxycinnamic acids (HCA) content from J. knotweed. Hydroxycinnamic acids were best extracted in water after 24 h, flavanols after 12 h, stilbenes between 12 and 24 h, and flavonol glycosides after 48 h of extraction. We also tested the allelopathic effect of the aqueous extract of A. pokeweed and J. knotweed on seed germination and shoot and root growth of perennial ryegrass. The results showed that the water extract of J. knotweed resulted in 38 to 48% lower seed germination of perennial ryegrass, and the extract of A. pokeweed resulted in 83 to 90% lower seed germination. The phytotoxic effect of the extract of J. knotweed and A. pokeweed was also reflected in a characteristic reduced growth of shoots and roots of perennial ryegrass. The phytotoxic action of IAPS could also be applied for beneficial purposes, since this would be an effective strategy for their control and a reduction of their spread in the environment.

Recovery and Concentration of Polyphenols from Roasted Hazelnut Skin Extract Using Macroporous Resins

Hazelnut skin is a rich source of polyphenols but is generally discarded during the roasting process of hazelnuts. Previous studies reported the extraction and identification of these compounds using different solvents and procedures; however, there are few reports on their enrichment and purification. In this study, three types of Amberlite macroporous resins (XAD 16, XAD 4, and XAD 7) were compared to evaluate the enrichment of polyphenols via adsorption and desorption mechanisms. The operating condition parameters for polyphenol adsorption/desorption of each resin were determined, the kinetics of adsorption were examined, and a method for polyphenol recovery was developed using static and dynamic adsorption/desorption. Antioxidant activity and high-performance liquid chromatography-diode array detection were used to confirm the increase in polyphenols obtained using the adsorption/desorption technique. XAD16 showed the highest adsorption capacity, with a recovery of 87.7%, and the adsorption kinetics fit well with a pseudo-second-order model. The highest poly-phenol desorption ratio was observed using an ethanol/water solution (70% v/v) at a flow rate of 1.5 bed volume/h.

Adsorption and Desorption Characteristics of Total Flavonoids from Acanthopanax senticosus on Macroporous Adsorption Resins

We examined the application of six different resins with the aim of selecting a macroporous resin suitable for purifying Acanthopanax senticosus total flavonoids (ASTFs) from Acanthopanax senticosus crude extract (EAS) by comparing their adsorption/desorption capacities, which led to the selection of HPD-600. Research on the adsorption mechanism showed that the adsorption process had pseudo-second-order kinetics and fit the Freundlich adsorption model. Moreover, the analysis of thermodynamic parameters indicated that the adsorption process is spontaneous and endothermic. The optimal conditions for purification of ASTFs were determined as sample pH of 3, 60% ethanol concentration, and 3 BV·h⁻¹ flow rate, for both adsorption and desorption, using volumes of 2.5 and 4 BV, respectively. The application of macroporous resin HPD-600 to enrich ASTFs resulted in an increase in the purity of total flavonoids, from 28.79% to 50.57%. Additionally, the antioxidant capacity of ASTFs was higher than that of EAS, but both were lower than that of L-ascorbic acid. The changes in ASTFs compositions were determined using ultra-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS), with the results illustrating that the levels of seven major flavonoids of ASTFs were increased compared to that in the crude extract.

Matrix Solid-Phase Dispersion Coupled with HPLC-UV for Simultaneous Extraction, Purification and Determination of Six Lignans in Schisandra chinensis Fruits

An efficient method for simultaneous extraction, purification and determination of six lignans in Schisandra chinensis Baill was developed by employing matrix solid-phase dispersion (MSPD) extraction followed by HPLC-UV determination analysis. Several sorbent and desorption solvent that affected the extraction yield of lignans were investigated; neutral alumina and absolute ethanol were selected as the best dispersing material and desorption agent, respectively. Other extraction conditions for MSPD were optimized as follows: 1:2 of S. chinensis raw material to neutral aluminum oxide mass ratio, 1:30 (g/mL) of sample to absolute ethanol, 2.5 h of desorption time and 50°C of desorption temperature. Under the above conditions, the total extraction yield for six lignans have reached (16.99 ± 0.33) x 103 mg/kg with a higher content of 6.88 ± 0.25% in the extracts. Comparative studies were explored by conducting other six extraction approaches including Soxhlet extraction, heat reflux extraction, smashing tissue extraction, microwave-assisted extraction, ultrasonic-assisted extraction and ultrasonic-microwave synergistic extraction. Results showed MSPD technique not only improved the extraction yield, but also improved the purity of lignans, it can be generalized to more extraction of natural compounds. In addition, the validated HPLC-UV method had been successfully applied to analysis of lignans from 10 real S. chinensis samples.

Optimized extraction of astaxanthin from shrimp shells treated by biological enzyme and its separation and purification using macroporous resin

The best enzymatic protease treatment of shrimp shells was identified by comparing the enzymatic hydrolysis effects of many different types of biological enzymes using fresh Arctic sweet shrimp as raw materials. The optimal enzymolysis conditions were determined using neutral protease as the best enzymatic protease. Among multiple macroporous adsorption resins, XDA-8 macroporous adsorption resin was preferable due to its static adsorption rate and desorption rate. The yield of astaxanthin (134.20 μg/g) after treatment with neutral protease was 3.7 times higher than that of the control group (36.03 μg/g). The yield of astaxanthin was obviously improved after enzymolysis of the shrimp shells. The purity of the astaxanthin was up to 87.34%, approximately 6508 times higher than that of the raw material. The production cost of astaxanthin would be greatly reduced by use of XDA-8 resin to obtain high-purity astaxanthin. This technique offers a high value-added utilization of shrimp shells.

Anti-glycation effect of Ecklonia cava polysaccharides extracted by combined ultrasound and enzyme-assisted extraction

The anti-glycation effects of polysaccharides from Ecklonia cava were examined according to extraction method-hot buffer (HP), ultrasound (UP), enzyme (EP), or a combination of ultrasound and enzyme (UEP). The physicochemical properties, monosaccharide compositions, and structural characteristics of the polysaccharides were determined. UP, EP, and UEP had higher fucose and galactose compositions than HP. The FT-IR spectra of samples showed the presence of sulfate esters and 4-sulfate galactose. 1H NMR indicated that alginate was removed by purification. UP, EP, and UEP possessed higher sulfate contents than HP. UEP presented with the highest extraction yield and lowest protein and uronic acid contents. The levels of AGE formation, as well as fructosamine, α-dicarbonyl, and protein carbonyl contents were determined during a 3-week incubation in a BSA/fructose system. UEP and UP effectively inhibited AGE, although the inhibition effect was lower than that of aminoguanidine. However, UP and UEP showed higher inhibition of fructosamine, α-dicarbonyl, and protein carbonyl than aminoguanidine. AGE formation was negatively correlated with sulfate content and some monosaccharide compositions (fucose, galactose, and glucose), but positively correlated with molecular weight. Overall, the present study suggests that UEP is a suitable extraction method for obtaining anti-glycation agents from E. cava.

Improved solid phase extraction for selective and efficient quantification of sunset yellow in different food samples using a novel molecularly imprinted polymer reinforced by Fe3O4@UiO-66-NH2

The overuse of synthetic dyes in food products has gradually increased in recent years, resulting food safety and human health has become a global issue. An innovative design of a magnetic molecularly imprinted polymer (Fe3O4@UiO-66-NH2@MIP) for efficient, fast, and selective determination of sunset yellow (SY) from different food products was described in this study. The absorption properties of Fe3O4@UiO-66-NH2@MIP were elucidated by adsorption kinetics, isotherms, reusability, and selectivity experiments. Because of the incorporation of porous Fe3O4@UiO-66-NH2nanocomposite into molecularly imprinted polymer an efficient nanosorbent with a short equilibrium time, a high adsorption capacity, and a good imprinting factor was finally obtained. The porous Fe3O4@UiO-66-NH2@MIP are also used for quantification of the SY. Under optimal conditions, good linearity (R2 0.9964) in the range of 1.0-120 mg L-1 and a low limit of detection (0.41 mg L-1) was observed with satisfactory recoveries (92.50-106.1%) and excellent reusability (RSD ≤ 6.6% after 12 cycles).