Ultrasonic treatment at different pH values affects the macromolecular, structural, and rheological characteristics of citrus pectin

Preparation and structure-function relationships of homogalacturonan-rich and rhamnogalacturonan-I rich pectin: A review

Pectin has multiple functions and is widely used in the food industry. It is an acidic heteropolysaccharide found in most plants, mainly consisting of two regions: homogalacturonan (HG) and rhamnogalacturonan-I (RG-I). HG and RG-I rich pectin have unique structures and functional properties, which can be obtained through specific preparation methods. Some emerging physics assisted preparation strategies are more advantageous for preparing specific structures with higher purity and efficiency than traditional preparation methods. HG and RG-I rich pectin have unique processing and functional properties, but sometimes a proper ratio of HG and RG-I pectin may have better effects than individuals. Therefore, it is speculated that there may be some synergistic effects between the two pectin structures. A comprehensive understanding of the preparation, structure, and functional relationship of HG and RG-I rich pectin is crucial for the efficient preparation of pectin with targeted functions.

Ultrasonic treatment affects the macromolecular, conformational, structural and rheological properties of curdlan in different solvents

Curdlan is a microbial extracellular polysaccharide composed of β-(1 → 3)-glycosidic linkages, which exhibits poor water solubility at room temperature due to its formation of crystalline regions through intra- and inter-molecular hydrogen bonding interactions. The chain conformations of curdlan can be modified by different solvents. Thus, this study examined the effects of ultrasonication on the macromolecular, structural, and rheological characteristics of curdlan in three different solvents (0.1 M NaOH, DMSO, and 0.1 M alkali-neutralization (AN)). The results showed that the water solubility of curdlan treated with ultrasonic for 60 min in DMSO, NaOH and AN condition cexhibited 16.26 ± 0.46 %, 13.62 ± 0.23 %, and 15.37 ± 0.61 %, respectively, while their molecular weight values were 10.53 kDa, 19.27 kDa and 17.25 kDa, respectively. This phenomenon indicated that curdlan preferentially dissolved and was susceptible to ultrasonic degradation in DMSO than that in other two solvents, thus enhancing its water solubility. After ultrasonic treatment, the conformation of curdlan in DMSO transformed from flexible chain to irregular helices due to the breaking of both inter- and intra-molecular hydrogen bonds, while there was no significant change in three-helix conformation of curdlan in the other two solvents, implying that curdlan with a flexible chain is more susceptible to degrade by ultrasonic than in rigid rod. Additionally, ultrasonic treatment resulted in decreased rheological properties of curdlan. Overall, this study will offer a theoretical foundation for the ultrasonic modification of curdlan in different solvents, broadening its potential applications in the food industry and biomedicine.

Effect of modifications on structure, physicochemical properties and lead ions adsorption behavior of dietary fiber of Flammulina velutipes

The health effects of dietary fiber have been widely concerned, which are closely related to physicochemical properties. This study focused on soluble dietary fiber of Flammulina velutipes (FDF), evaluated the effects of modifications on structural characterization, the physicochemical properties and the heavy metal adsorption characteristics, and further clarified underlying mechanisms on Pb2+ adsorption behavior of FDFs. The results showed the modifications of extrusion and cellulase improved the yield of FDFs, increased the release of active groups and enhanced the adsorption ability in vitro. Besides, Pb2+ adsorption altered porous structure and led to the presence of carboxylate. It was a spontaneous endothermic reaction and can be fitted by the pseudo-second-order kinetic equation. The Freundlich equation was suitable to describe the adsorption isotherm. These results highlighted potential applications of the dietary fiber modification and laid the theoretical foundation for the modification processing of F. velutipes and protection from food-derived heavy metal toxicity.

Ultrasonic depolymerization of pomegranate peel pectin: Effect of sonication time on antioxidant, α-amylase inhibitory, and prebiotic properties

This study aimed to investigate the effects of ultrasonic treatment time (5-30 min) on the structural characteristics, antioxidant, α-amylase inhibitory, and prebiotic properties of pomegranate peel pectin (PPP). The extracted PPP was rich in galacturonic acid (64.27 %) and exhibited a high degree of esterification (DE, 61.7 %), with an average molecular weight (Mw) of 135.6 kDa. The Mw, particle size, and DE of ultrasonic-treated PPPs (U-PPPs) significantly decreased compared to the PPP. FTIR analysis revealed that the intensity of the peak at ∼1730-1720 cm-1 weakened with prolonged treatment time. The total phenol content, antioxidant activity, and α-amylase inhibition of U-PPPs were enhanced compared to PPP. Both PPP and U-PPP treated for 30 min promoted the growth of Bifidobacterium longum and Lactobacillus casei, with U-PPP-30 showing a greater preference over PPP and inulin. In conclusion, ultrasonic treatment represents a promising approach to depolymerization aimed at enhancing the biological activities of pectin.

Improving complexation of puerarin with kudzu starch by various ultrasonic pretreatment: Interaction mechanism analysis

The industrial preparation of kudzu starch (KS) significantly reduces the remaining of flavonoids like puerarin (PU) in the product, weakening its biological activity and making pre-treatments on kudzu crucial. Ultrasonic technique, widely used for modifying biomolecules, can enhance nutrient interactions like those between starch and polyphenols in foods. Thus, a puerarin-kudzu starch (PKS) complex was prepared with the introduction of ultrasonic pretreatment. The results indicated that sonication increased the binding of PU to KS from 0.399 ± 0.01 to 0.609 ± 0.05 mg/g. Particle size analysis and SEM revealed that the particles of the ultrasonic puerarin-kudzu starch complex (UPKS) were larger than those of the untreated complexes. XRD, UV-vis, and FT-IR spectroscopic analyses indicated that hydrogen bonding primarily governs the interaction between PU and KS. Additionally, incorporating PU decreased the starch structure's orderliness, while ultrasonic treatment altered the helical configuration of straight-chain starch, leading to the formation of a new, ordered structure through the creation of new hydrogen bonds. Additionally, gels formed from UPKS exhibited higher viscosity, elasticity, and shear stress, suggesting that ultrasound significantly altered the intermolecular interactions between PKS. In conclusion, the use of ultrasound under optimal conditions has demonstrated its effectiveness in preparing PKS complexes, highlighting its significant potential to produce high value-added kudzu-based products.

Structural characteristics and antioxidant activity of binary compounds formed by covalent modification of plant derived recombinant lactoferrin (OsrhLF) with four typical carbohydrates

Lactoferrin is crucial for the mammalian immune system, but the extraction of bovine lactoferrin (bLF) is low, and human lactoferrin in breast milk is costly. Although there are some reports on heterologous expression of lactoferrin, limited knowledge is available. In this study, structural characteristics and antioxidant activity of binary compounds formed by covalent modification of plant derived recombinant human lactoferrin (OsrhLF) with four typical carbohydrates including sodium alginate (SA), maltodextrin (Mal), pectin (Pec), and lactose (Lac). Results indicated that the structure of both bLF and OsrhLF unfolded, with side chain lysine or terminal amino acids forming CN bonds with aldehydes, altering their structure and improving stability and hydrophilicity. Compared with OsrhLF, the thermal denaturation temperatures of H-OsrhLF-Mal and H-OsrhLF-Lac increased by 56.8 °C and 58.4 °C, respectively. OsrhLF exhibited superior surface hydrophilicity and thermal stability compared to bLF, with Mal showing the most significant effect, aiding future functional food applications.

Controlling strategies of methanol generation in fermented fruit wine: Pathways, advances, and applications

Methanol is widely existed in fermented fruit wines (FFWs), and the concentration is excessive at times due to inappropriate fermentation conditions. Methanol is neurotoxic, and its metabolites of formaldehyde and formic acid can cause organic lesions and central respiratory system disorders. FFWs with unspecified methanol limits are often produced with reference to grape wine standards (250/400 mg/L). To clarify the causes of methanol production in FFWs and minimize the methanol content, this study summarizes the current process methods commonly applied for methanol reduction in FFWs and proposes novel potential controlling strategies from the perspective of raw materials (pectin, pectinase, and yeast), which are mainly the low esterification modification and removal of pectin, passivation of the pectinase activity, and the gene editing of yeast to target the secretion of pectinases and modulation of the glycine metabolic pathway. The modified raw materials combined with optimized fermentation processes will hopefully be able to improve the current situation of high methanol content in FFWs. Methanol detection technologies have been outlined and combined with machine learning that will potentially guide the production of low-methanol FFWs and the setting of methanol limits for specific FFW.

Temperature-driven divergence in molecular distribution and microbial invasion and the associated texture softening during dual-phase fermentation of Paocai

Temperature is an important driving force that shapes the texture of fermented vegetables through driving the molecular distribution and microbial invasion between the liquid phase (brine) and the solid phase (vegetables) during fermentation. The objective of this study was to investigate the texture softening by investigating firmness, microstructure, physicochemical properties, molecular distribution and microbial community between brine and vegetables of Paocai as affected by fermentation temperatures of 10 °C, 20 °C and 30 °C. Results demonstrated that, compared with 10 °C and 30 °C, 20 °C attenuated softening of Paocai by restraining microbial invasion and suppressing pectinolysis. Moreover, at 20 °C, a balanced molecular distribution and microbial community were achieved between vegetables and brine, thus accomplishing acid-production fermentation. By contrast, 10 °C and 30 °C promoted nonfermentative microbial genera, retarding fermentation. This study provided an understanding of the divergent influence of temperature on quality formation of fermented vegetables during fermentation.

Understanding the two-stage degradation process of peach gum polysaccharide within ultrasonic field

This study investigated the dynamic degradation process of peach gum polysaccharide (PGPS) within ultrasonic field. The results show that the molecular weight, intrinsic viscosity, and polydispersity of PGPS were rapidly reduced within the initial 30 min and then gradually decreased. The solubility of PGPS was drastically improved from 3.0% to 40.0-42.0% (w/w) after 120 min. The conformation of PGPS changed from an extended chain to a flexible random coil within initial time of ultrasound, and gradually tended to be compact spheres. The apparent viscosity of PGPS significantly decreased after 30 min, and PGPS solution exhibited a near-Newtonian fluid behavior. It is possible that these above changes are a result of random cleavage of the decrosslinking and the backbone of PGPS, resulting in the preservation of its primary structure. The results will provide a fundamental basis for orientation design and process control of ultrasonic degradation of PGPS.

Tunning the hydrophobic performance and thermal stability of pectin film by acetic anhydride esterification

Pectin, a polysaccharide found in plant cell walls, is characterized by a high abundance of hydroxyl groups and carboxylic acid groups, which results in a strong affinity for water and limits its suitability as a film material. This study aimed to modulate the esterification degree of PEC films by adjusting the concentration of acetic anhydride, and assess the impact of acetic anhydride esterification modification on the properties of the resultant PEC films. The results demonstrated successful grafting of acetic anhydride onto the galacturonic acid ring in the PEC molecule through the esterification process. The hydrophobicity, thermal stability, barrier properties, and mechanical properties of the esterified PEC films were investigated. Among the various concentrations tested, the E-PEC-0.25 film exhibited the highest contact angle of 103.46° and tensile strength of 33.44 MPa, showcasing optimal performance. The E-PEC-0.1 film achieved the highest esterification degree of 0.94 and elongation at a break of 21.11 %. It also exhibited the transparency of 11.66 and the lowest water vapor transmission rate of 0.56 g·mm/(m2·h·kpa). Additionally, TGA and DSC tests revealed enhanced thermal stability of the esterification-prepared films. These findings highlight the potential of acetic anhydride tuning as a promising strategy for optimizing pectin film production.

Characterization and in vitro calcium release of the novel calcium-loaded complexes using Antarctic krill protein and pectin: Effect of different blending sequences

Food-grade biopolymer-based complexes are of particular interest in the field of biologic ingredient delivery owing to unique controlled-release properties. Herein, three calcium-loaded complexes using Antarctic krill protein (P) and pectin (HMP) with different blending sequences were designed, named P + Ca + HMP, P + HMP + Ca and HMP + Ca + P, respectively. The calcium-loaded capacity, structural properties, and in vitro gastrointestinal calcium release of the complexes were investigated. The results demonstrated that the calcium binding rate and content of the P + Ca + HMP complex were the highest, reaching to 90.3 % and 39.0 mg/g, respectively. Particularly, the P + Ca + HMP complex exhibited a more stable fruit tree-like structure. Furthermore, the structural analysis confirmed that the primary interaction forces involved hydrogen bond, electrostatic, hydrophobic and ionic bond interaction. Ultimately, the P + Ca + HMP complex demonstrated superior calcium delivery. In conclusion, a novel calcium delivery system was successfully developed based on optimized the self-assembly sequence, which held significant importance in promoting the high-value utilization of Antarctic krill protein and enhancing the in vitro bioaccessibility of calcium.

Potential structure-function relationships of pectic polysaccharides from quinoa microgreens: Impact of various esterification degrees

Pectic polysaccharides are one of the most vital functional ingredients in quinoa microgreens, which exhibit numerous health-promoting benefits. Nevertheless, the detailed information about the structure-function relationships of pectic polysaccharides from quinoa microgreens (QMP) remains unknown, thereby largely restricting their applications as functional foods or fortified ingredients. Therefore, to unveil the possible structure-function relationships of QMP, the mild alkali de-esterification was utilized to modify QMP, and then the correlations of esterification degrees of native and modified QMPs to their biological functions were systematically investigated. The results showed that the modified QMPs with different esterification degrees were successfully prepared by the mild alkali treatment, and the primary chemical structure (e.g., compositional monosaccharides and glycosidic linkages) of the native QMP was overall stable after the de-esterified modification. Furthermore, the results revealed that the antioxidant capacity, antiglycation effect, prebiotic potential, and immunostimulatory activity of the native QMP were negatively correlated to its esterification degree. In addition, both native and modified QMPs exerted immunostimulatory effects through activating the TLR4/NF-κB signaling pathway. These results are conducive to unveiling the precise structure-function relationships of QMP, and can also promote its applications as functional foods or fortified ingredients.

Evaluation of citrus pectin extraction methods: Synergistic enhancement of pectin's antioxidant capacity and gel properties through combined use of organic acids, ultrasonication, and microwaves

The biological potency of pectin is intricately intertwined with its intricate molecular architecture. The fine structure of pectin is influenced by the extraction method, while the specific impact of these methods on the fine structure and the affected attributes thereof remains enigmatic. This study delves into the profound analysis of eight distinct extraction methods influence on the structure and biological activity of citrus peel pectin. The findings demonstrate that citric acid ultrasound-assisted microwave extraction yields pectin (PectinCA-US/MV) with higher viscosity and a dense, rigid chain. Pectin extracted with acetic acid ultrasound (PectinAA-US) and citric acid ultrasound (PectinCA-US) exhibits elevated galacturonic acid (GalA) levels and reduced D-galactose (Gal) content, enhancing antioxidant activity. Eight pectin-chitosan (CS) hydrogels, especially PectinCA-US/MV-CS, demonstrate commendable thermal stability, rheological properties, self-healing capability, and swelling behavior. This study characterizes citrus peel pectin properties from different extraction methods, laying a foundation for its application in food, pharmaceuticals, and industry.

Effect of ultrasonic modification on the binding ability of pectin to anthocyanin

BACKGROUND

Pectin was considered as a potential candidate to improve the thermal stability of anthocyanins, and the binding ability of pectin to anthocyanins was influenced by its structure. In this study, sunflower pectins, modified by ultrasound (40 kHz) for different periods of time, were prepared and used to bind with anthocyanins, extracted from purple sweet potato.

RESULTS

Characterization and thermal stability of pectin-anthocyanin complexes were investigated. The ultrasonic modification of pectin resulted in many changes in pectin chemical structure, including degradation of neutral sugar side chains, breakage of methoxyl groups, and increased molecular flexibility. Extension of ultrasonic modification time led to greater changes in pectin chemical structure. Analysis of the binding ability, as determined by Fourier transform infrared spectroscopy and molecular dynamics simulations, revealed that the interaction between pectin and anthocyanins was driven by hydrogen bonding, electrostatic interaction, and hydrophobic interaction. Pectins with different ultrasonic modification times bound with anthocyanins to different extents, mainly resulting from an increase in the number of hydrogen bonds. According to high-performance liquid chromatographic analysis, during heating at 90 °C the stronger the binding ability of pectin and anthocyanin complex, the better was its thermal stability.

CONCLUSION

Ultrasonic modification of pectin could effectively enhance its binding ability to anthocyanin. © 2023 Society of Chemical Industry.

Insights into the impact of modification methods on the structural characteristics and health functions of pectin: A comprehensive review

Pectin is a complex polysaccharide that is widely present in plant cells and has multiple physiological functions. However, most pectin exists in the form of protopectin, which has a large molecular weight and cannot be fully absorbed and utilized in the human gut to exert its effects. The significant differences in the structure of different sources of pectin also limited their application in the food and medical fields. In order to achieve greater development and utilization of pectin functions, this paper reviewed several commonly used methods for pectin modification from physical, chemical, and biological perspectives, and elaborated on the relationship between these modification methods and the structure and functional properties of pectin. At the same time, the functional characteristics of modified pectin and its application in medical health, such as regulating intestinal health, anticancer, anti-inflammatory, and drug transport, were reviewed, so as to provide a theoretical basis for targeted modification of pectin and the development of new modified pectin products.

Degree of methyl esterification: A key factor for the encapsulation of icaritin with pectin

Pectin is a promising nano-carrier. The degree of methyl esterification (DM) influences the physiochemical properties of pectin. However, the effect of DM on the encapsulation capacity of pectin remains unclear. In this work, low methyl-esterified pectin (LMP) and high methyl-esterified pectin (HMP) were prepared. The molecular weight, rheological properties of these pectins with various DM levels were determined. Then icaritin/pectin micelles (IPMs) were prepared using HMP and LMP. Notably, higher loading capacities (18.75-20.12 %) were observed in HMP-IPMs compared to LMP-IPMs (15.72-16.64 %). Furthermore, LMP-IPMs demonstrated a DM-dependent reduction in particle sizes, ranging from 449 to 527 nm. In contrast, the particle sizes of HMP-IPMs varied between 342 and 566 nm, with smaller particle sizes observed in HMP-IPMs at higher DM levels. A significant positive correlation was found between DM and the formation of IPMs, including encapsulation efficiency, loading capacity, Zeta potential, and polydispersity index. Alkali de-esterification showed a weak impact on the pectin structure. Hydroxyl groups like 7-OH and 5-OH of icaritin might be involved in the formation of IPMs. The hydrogen-bond interactions between pectin and icaritin could be enhanced as DM increased.

Efficient and Selective Extraction of Rhamnogalacturonan-I-Enriched Pectic Polysaccharides from Tartary Buckwheat Leaves Using Deep-Eutectic-Solvent-Based Techniques

Tartary buckwheat green leaves are considered to be among the most important by-products in the buckwheat industry. Although Tartary buckwheat green leaves are abundant in pectic polysaccharides, their potential applications in the food industry are quite scarce. Therefore, to promote their potential applications as functional or fortified food ingredients, both deep-eutectic-solvent-assisted extraction (DESE) and high-pressure-assisted deep eutectic solvent extraction (HPDEE) were used to efficiently and selectively extract pectic polysaccharides from Tartary buckwheat green leaves (TBP). The results revealed that both the DESE and HPDEE techniques not only improved the extraction efficiency of TBP but also regulated its structural properties and beneficial effects. The primary chemical structures of TBP extracted using different methods were stable overall, mainly consisting of homogalacturonan and rhamnogalacturonan-I (RG-I) pectic regions. However, both the DESE and HPDEE methods could selectively extract RG-I-enriched TBP, and the proportion of the RG-I pectic region in TBP obviously improved. Additionally, both the DESE and HPDEE methods could improve the antioxidant and anti-glycosylation effects of TBP by increasing its proportion of free uronic acids and content of bound polyphenolics and reducing its molecular weight. Moreover, both the DESE and HPDEE methods could partially intensify the immunostimulatory effect of TBP by increasing its proportion of the RG-I pectic region. These findings suggest that DES-based extraction techniques, especially the HPDEE method, can be promising techniques for the efficient and selective extraction of RG-I-enriched TBP.

Effect of H2O2-assisted ultrasonic bath on the degradation and physicochemical properties of pectin

The effects of H2O2-assisted ultrasonic bath degradation technology on pectin were investigated. The degradation efficiency with different pectin concentrations, H2O2 concentrations, ultrasonic power, and ultrasonic time was analyzed. The results showed that pectin concentration was negatively correlated with the degradation efficiency of pectin, while, H2O2 concentration, ultrasonic power, and ultrasonic time were positive correlated with the degradation efficiency. Besides, the apparent viscosity and viscoelasticity of the degraded pectin decreased significantly. The antioxidant activity increased after the H2O2-assisted ultrasonic bath treatment. The results of FTIR, NMR, laser particle size, SEM, XRD, and AFM analysis indicated that the degradation treatment did not destroy the main structure of pectin. The average particle size and crystallinity of pectin decreased. The degree of aggregation and the height of the molecular chain decreased significantly. In conclusion, the H2O2-assisted ultrasonic bath degradation technique could effectively degrade pectin. This study provided a comprehensive analysis of the degradation of pectin under H2O2-assisted ultrasonic bath, which will be beneficial to further develop H2O2-assisted ultrasonic bath techniques for pectin degradation.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

Extraction of pectins from renewable grapefruit (Citrus paradisi) peels using deep eutectic solvents and analysis of their structural and physicochemical properties

This study presents an innovative attempt to extract high-quality pectins from grapefruit (Citrus paradisi) peels by using deep eutectic solvents (DESs) as extraction agents. The maximum yield of betaine-citric acid (BC)-extracted pectin (BC-P) reached 36.47 % under the optimum process conditions: an L/S ratio of 25 mL/g, a pH of 2.0, and a temperature of 85 °C for 120 min. The yield of BC-P was significantly higher than HCl-extracted pectin (HCl-P, 8.76 %) under a pH of 2.0. In addition, the structural, physicochemical, and emulsifying properties of the purified pectins (BC-P and HCl-P) and commercial pectin (CP) were comparatively analyzed. Results showed that BC-P exhibited higher RG-I value, more arabinan side-chains, bigger Mw and Mn value than HCl-P. Moreover, the viscosity, G' and G'' of BC-P were significantly higher than those of HCl-P and CP. More importantly, BC-P demonstrated better emulsifying activity and stability compared to HCl-P and CP. When the concentration of BC-P was increased to 1.50 %, a stable emulsion containing a 50 % soybean oil fraction could be obtained. Our results confirmed that DESs can be considered as high-effective agents for pectin extraction. Pectins extracted from grapefruit peels can be as a promising natural emulsifiers that can be used in the food industry.

Valorization of walnut green husk (Juglans regia L.) through sequential electrohydrodynamic extraction of pectin and phenolics: Process optimization and multidimensional analysis

This study aimed to optimize the extraction of pectin and phenolics from walnut green husk using the electrohydrodynamic method (EHD) and assess its impact on the chemical structure and properties of pectin. A comparative analysis was conducted with acidified water as the conventional extraction method. The results revealed significant improvements under the optimal EHD conditions (36.8 min, 17.5 kV, 90 °C), leading to a remarkable increase of over 64 % in pectin yield and >20 % in total phenolic content in half the extraction time. Chemical analysis showed that pectin samples contain 1.4-1.7 % ash, 3.6-4.6 % protein, over 90 % carbohydrates, and a galacturonic acid content ranging from 67.7 to 68.2 g/g. Both extraction methods yielded pectin with a high methoxyl degree, comparable thermal stability, and amorphous structure. EHD treatment resulted in reduced molecular weight, degree of esterification, water-holding capacity, and emulsion stability of pectin while enhancing its solubility and emulsion capacity. In summary, EHD treatment significantly improved extraction yield and changed the functionality of pectin, particularly in terms of emulsion activity. This alteration should be considered when utilizing pectin for specific applications.

Comparison on structure, properties and functions of pomegranate peel soluble dietary fiber extracted by different methods

In this research, the different methods (acid extraction, alkaline extraction and enzymatic extraction) were used to extract soluble dietary fiber (SDF) from pomegranate peel and compared with water extraction. Results revealed that all three extraction methods influenced the structure, physicochemical and functional properties of SDF. Especially, SDF extracted by enzymes (E-SDF) and SDF extracted by alkali (A-SDF) had higher yield (27.30% and 27.17%), molecular weight and thermal stability than SDF extracted by water (W-SDF). Higher oil holding capacity (OHC) was found in SDF extracted by acid (C-SDF) (3.18 g/g), A-SDF (3.18 g/g) and E-SDF (5.36 g/g) compared with W-SDF. In addition, A-SDF showed the smallest particle size, lowest ζ-potential and highest viscosity among the tested samples. E-SDF presented a more porous structure, better glucose adsorption capacity (GAC) and antioxidant activity than C-SDF and A-SDF. To sum up, A-SDF and E-SDF may have great potential to be functional food ingredients in the food industry.

Interaction between ultrasound-modified pectin and icaritin

Pectin can improve the bioaccessibility of icaritin as a nanocarrier, and ultrasound can modify the pectin structure. However, the interaction between ultrasound-modified pectin (UMP) and icaritin remains unclearly. In this work, the effects of UMP on the physiochemical properties of icaritin/pectin micelles (IPMs) were investigated. The IPMs prepared with UMP (UMP-IPMs) showed lower encapsulation efficiencies and loading capacities, comparing with native IPMs. UMP-IPMs had smaller particle sizes (325-399 nm) than native IPMs (551 nm). The Mw, viscosity, G' and G" of pectin were determined. NMR spectra indicated that the repeating unit in pectins remained consistently before and after ultrasound treatment, and 7-OH of icaritin was involved in hydrogen bond formation with pectin. The larger chemical shift movement of 6-H and 7-OH for U3-IPMs than P0-IPMs suggested that stronger hydrogen bond interaction between icaritin and pectin. UMP-IPMs exhibited stronger anti-proliferation activities against HepG2 cells than native IPMs.

Structural characteristics and gel properties of pectin from citrus physiological premature fruit drop

This study is the first to extract and characterize pectin from citrus physiological premature fruit drop. The extraction yield of pectin reached 4.4 % by acid hydrolysis method. The degree of methoxy-esterification (DM) of citrus physiological premature fruit drop pectin (CPDP) was 15.27 %, indicating it was low-methoxylated pectin (LMP). The monosaccharide composition and molar mass test results showed CPDP was a highly branched macromolecular polysaccharide (β: 0.02, Mw: 2.006 × 10⁵ g/mol) with rich rhamnogalacturonan I domain (50.40 %) and long arabinose and galactose side chain (32.02 %). Based on the fact that CPDP is LMP, Ca²⁺ was used to induce CPDP to form gels. Textural and rheological tests showed that the gel strength and storage modulus of CPDP were higher than commercial citrus pectin (CP) used in this paper due to the lower DM and rich neutral sugar side chains of CPDP. Scanning electron microscope (SEM) results showed CPDP had stable gel network structure.

The droplet breakup model and characteristics of pH-shifted peanut protein isolate-high methoxyl pectin stabilised emulsions under ultrasound

The effect of pH on the occurrence states of peanut protein isolate (PPI) and high methoxyl pectin (HMP), and droplet breakup model of the emulsions under ultrasound were studied. Particle size distribution and scanning electron microscopy results showed that PPI-HMP existed a soluble complex at pH 5.0, had no interaction at pH 7.0, and was co-soluble at pH 9.0. Droplet breakup model results revealed that the characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and 9.0. The average diameter of the droplet well satisfied the model. According to rheological properties, interface tension, and microstructure, the formation mechanism and characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and pH 9.0. The research provided a reference for constructing emulsions using pH-shifted PPI-HMP under ultrasound.

The Preparation and Potential Bioactivities of Modified Pectins: A Review

Pectins are complex polysaccharides that are widely found in plant cells and have a variety of bioactivities. However, the high molecular weights (Mw) and complex structures of natural pectins mean that they are difficult for organisms to absorb and utilize, limiting their beneficial effects. The modification of pectins is considered to be an effective method for improving the structural characteristics and promoting the bioactivities of pectins, and even adding new bioactivities to natural pectins. This article reviews the modification methods, including chemical, physical, and enzymatic methods, for natural pectins from the perspective of their basic information, influencing factors, and product identification. Furthermore, the changes caused by modifications to the bioactivities of pectins are elucidated, including their anti-coagulant, anti-oxidant, anti-tumor, immunomodulatory, anti-inflammatory, hypoglycemic, and anti-bacterial activities and the ability to regulate the intestinal environment. Finally, suggestions and perspectives regarding the development of pectin modification are provided.

Fabrication and Characterization of Eco-Friendly Polyelectrolyte Bilayer Films Based on Chitosan and Different Types of Edible Citrus Pectin

The eco-friendly polyelectrolyte bilayer films were prepared by layer-by-layer (LBL) casting method using chitosan (CS) and four types of edible citrus pectin as film substrates. The results showed that the polyelectrolyte bilayer films exhibited excellent comprehensive properties. Furthermore, the interaction between CS and pectin was closely related to the degree of methyl-esterification (DM), molecular weight (Mw), and zeta potential of pectin. The low DM, Mw, and high zeta potential of the low methyl-esterified pectin (LM) resulted in a denser internal structure of the bilayer film, stronger UV shielding performance, and stronger gas barrier ability. The high DM and Mw of the high methyl-esterified pectin (HM) endow the bilayer film with stronger mechanical properties, thermal stability, and antifogging property. The microstructural and spectroscopic analysis showed that there are hydrogen bonds and electrostatic interactions between the layers. Overall, the developed CS-pectin polyelectrolyte bilayer films provided potential applications for food bioactive packaging.

Effects of various degrees of esterification on antioxidant and immunostimulatory activities of okra pectic-polysaccharides

Pectic-polysaccharides are considered as one of the most abundant bioactive components in okra, which possess various promising health-promoting effects. However, the knowledge regarding the structure-bioactivity relationship of okra pectic-polysaccharides (OPP) is still limited. In this study, effects of various degrees of esterification (DEs) on in vitro antioxidant and immunostimulatory activities of OPP were analyzed. Results displayed that OPP with high (42.13%), middle (25.88%), and low (4.77%) DE values were successfully prepared by mild alkaline de-esterification, and their primary chemical structures (compositional monosaccharide and glycosidic linkage) and molecular characteristics (molecular weight distribution, particle size, and rheological property) were overall stable. Additionally, results showed that the notable decrease of DE value did not significantly affect antioxidant activities [2,2'-azino-bis (3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) and nitric oxide (NO) radical scavenging abilities as well as ferric reducing antioxidant power (FRAP)] of OPP, suggesting that the DE was not closely related to its antioxidant activity. In fact, the slight decrease of antioxidant activity of OPP after the alkaline de-esterification might be attributed to the slight decrease of uronic acid content. Nevertheless, the immunostimulatory effect of OPP was closely related to its DE, and a suitable degree of acetylation was beneficial to its in vitro immunostimulatory effect. Besides, the complete de-acetylation resulted in a remarkable reduction of immune response. The findings are beneficial to better understanding the effect of DE value on antioxidant and immunomodulatory activities of OPP, which also provide theoretical foundations for developing OPP as functional foods or health products.

Extraction and characterization of a pectin from sea buckthorn peel

Sea buckthorn peel is the by-product of the sea buckthorn processing, which contains many bioactive compounds. In this paper, sea buckthorn high methoxyl pectin (SBHMP) was obtained, with a yield of 8% and a light-colored. The SBHMP was a high methoxyl with a degree of esterification of 57.75% and uronic acid content of 65.35%. The structural and morphological characterization of SBHMP were analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Results showed that SBHMP presented a sheet and layered stacked morphological, and was mainly composed of galacturonic acid, arabinose, galactose, rhamnose, and mannose, which indicated that SBHMP mainly consisted of homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) type pectin polysaccharides. In addition, SBHMP also presented significant gel, thickening, and emulsifying properties. The results exhibited that SBHMP could form jelly-like gels under acid and high sucrose conditions, presenting a shear-thinning behavior and increasing apparent viscosity with the enhancement of pectin and sucrose contents. Besides, SBHMP could form oil-in-water emulsions with pectin concentrations of 1.0–3.0%. When the SBHMP concentrations were 2.0 and 3.0%, the emulsions were stable during 7 days of storage. Findings in this paper demonstrated the potential of SBHMP to be a food thickener and emulsifier and support the in-depth utilization of sea buckthorn by-products.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Interaction mechanism between soybean protein isolate and citrus pectin

In this study, citrus pectin (CP) and soybean protein isolate (SPI) were used as raw materials to prepare a complex. The interaction mechanism and structural changes between SPI and CP were deeply studied by fluorescence spectroscopy and Fourier infrared spectroscopy. The results show that CP has a strong quenching effect on SPI's endogenous fluorescence, and with the addition of CP, the endogenous fluorescence intensity of SPI decreased from 13,565.2 to 6067.3. The CP quenching of SPI is static quenching, and the number of combined bits is 1.26. The results of three-dimensional fluorescence spectra showed that the addition of CP reduced the polarity of SPI amino acid residue microenvironment and changed the protein structure. Hydrophobic interaction exists between CP and SPI. The results of three-dimensional fluorescence spectra showed that the addition of CP reduced the polarity of the amino acid residue microenvironment of SPI and changed the protein structure. Fourier transform infrared spectroscopy shows that CP could change the secondary structure of SPI by decreasing the α-helix and β-sheet, increasing β-rotation and irregular curl, destroying the ordered structure of SPI and increasing the polarity of the amino acids exposed to the solution. The microstructure analysis shows that SPI-CP composite system has honeycomb structure and dense pores. From the perspective of reaction thermodynamics, it was found that the addition of CP could improve the thermal stability of SPI and increase the denaturation temperature of SPI from 119.73 to 132.97°C. This study can provide a theoretical basis for the preparation of protein-pectin complexes and provides reference for their application in food grade gels and Pickering emulsions.

The effect of sonication-synergistic natural deep eutectic solvents on extraction yield, structural and physicochemical properties of pectins extracted from mango peels

In this study, eco-friendly deep eutectic solvents (DESs) were used as extracting agents for the first time in the extraction of pectins from mango peel. Two novel green solvents including betaine-citric acid (Bet-CA) and choline chloride-malic acid (ChCl-MaA) were screened, and the extraction conditions were further optimized by full factor design experimental along with RSM. In addition, ultrasound treatment also had an influence on extraction yield, structural and physicochemical properties of extracted pectins. Two DES-extracted pectins had significantly higher yield, larger molecular weight and particles size than HCl-extracted pectin. High intensity ultrasound power enhanced the yield of low-ester pectins, but decreased the molecular weight and particles size of the pectins extracted. Monosaccharide compositions analysis showed that higher content of galacturonic acid (GalA) and larger HG region were observed in two DESs-extracted pectins. Fourier transform infrared spectra (FT-IR) of all pectins extracted were similar, with slight differences. Two DESs-extracted pectins exhibited higher DE values than HCl-extracted pectin. Thermal analysis and zeta potential results showed that HCl-extracted pectin had better stability than ChCl-MaA-extracted pectin. Additionally, HCl-extracted pectin had higher viscosity properties than two DESs-extracted pectins or commercial pectin (CP). Moreover, it was found that HCl-extracted pectin was in a colloid state, while two DESs-extracted pectins or CP were in a flow state. Ultrasound treatment significantly improved the yields of pectin/low-ester pectin. Additionally, ultrasound treatment remarkably decreased the viscosity and viscoelastic properties of the pectins extracted. The results were conducive to our understanding of the relationship between extraction conditions and physicochemical properties of the pectins extracted, which provides theoretical basis for the functional application of mango peel pectins in the food and pharmaceutical industry.

Physicochemical and Functional Properties of Okra Leaf Polysaccharides Extracted at Different pHs

Different extraction pH values obtain polysaccharides with tailored structures and novel functionalities. This study investigated the influence of different extraction pH values (4.2, 6.8, and 9.2) on the physicochemical compositions and structural and functional properties of okra leaf polysaccharides (OLPs). The extraction yield (2.74–7.34%), molecular weights (68.5–85.4 kDa), total sugar contents (64.87–95.68%), degree of acetylation (18.28–22.88%), and methylation (8.97–15.20%) of OLPs varied significantly (p < 0.05). The monosaccharide composition reflected OLPs as pectic polysaccharides, with varied compositions of galacturonic acid, galactose, rhamnose, and arabinose. However, the differences in their sugar molar ratios, such as their side-chain and backbone chain compositions, greatly affected their functional properties. Additionally, notable differences due to extraction pH were observed in physical properties, thermal stability, and crystallinity. However, FTIR and NMR spectra revealed that extraction pH had negligible effects on the primary structure of OLPs. All OLPs showed non-Newtonian fluid behavior in the aqueous system with different apparent viscosities correlating with their molecular weights. Furthermore, the OLPs fractions stabilized oil-in-water emulsions differently and had distinct radical scavenging activities related to their compositions. This study provides a basis for selecting appropriate extraction pH to prepare OLPs with specific characteristics and applications in food-related disciplines.

Trends in "green" and novel methods of pectin modification - A review

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Physicochemical, structural and rheological properties of pectin isolated from citrus canning processing water

In order to better utilize the citrus pectin (CP) resource, the crude citrus pectin (CCP), obtained from the citrus fruit canning processing waste water, was purified by cellulose DEAE-52 column, providing neutral polysaccharide CP0 and two acidic polysaccharides (CP1 and CP3). CP1 had the highest yield among the three fractions, being 44.29%. The chemical composition, structure and morphology of these pectin components were analyzed. Monosaccharide composition analysis revealed that arabinose was the most abundant composition in these pectin samples. CCP, CP1 and CP3 were mainly composed of rhamnogalacturonan-I (RG-I) regions. Compared with CP3, CCP and CP1 had longer side chains, which are mainly consisted of arabinose. FT-IR and NMR analysis indicated that α-type glycosidic bonds are the main linkage in the four pectin components. These CP samples were found to possess different conformation, but no triple-helical conformation was observed in all these CP fractions. Scanning electron microscopy revealed that CCP, CP1 and CP3 all had irregular sheet-like structures and partly porous structures. The four pectin components showed the characteristics of non-Newtonian fluids and possessed good viscoelasticity. Due to these properties, the pectin might have potential application in food industry as food thickening agent.

Physicochemical characteristics and functional properties of high methoxyl pectin with different degree of esterification

Moderate alkali de-esterification can change the physicochemical characteristics and thus the functional properties of high methoxyl pectin (HMP). The results revealed that de-esterification could increase negative charges (Zeta potential from -21 to -31 mV), decrease molecular weight (from 448 to 136 kDa) and apparent viscosity of HMP. Homogalacturonan (HG) content decreased (from 62% to 49%) while rhamnogalacturonan Ⅰ (RG-Ⅰ) content increased (from 32% to 46%) after de-esterification. The group characteristics of HMP with different degree of esterification (DE) were similar and no obvious impact was made on degree of crystallinity by alkali de-esterification. A conformation transition of HMP molecule implied by Congo red test were occurred as the DE decreased. With the decrease of DE, the molecular structure of HMP became shorter and smaller, and the entanglement was weaker. The de-esterification caused slight decrease of thermal stability. Alkali de-esterification would weaken the gel property and the emulsifying ability of HMP.

Application of nonthermal processing technologies in extracting and modifying polysaccharides: A critical review

Polysaccharides are natural polymer compounds widely distributed in plants, animals, and microorganisms, most of which have a broad spectrum of biological activities to promote human health. They could also be used as texture modifiers in food industry due to their excellent rheological and mechanical properties. Many researchers have shown that nonthermal processing technologies have numerous advantages, such as high extraction efficiency, short extraction time, and environmental friendliness, in the extraction of polysaccharides compared with the traditional extraction methods. Moreover, nonthermal technologies could effectively change the physicochemical properties and structural characteristics of polysaccharides to improve their biological activities or processing properties. Therefore, a comprehensive summary about the extraction and modification of polysaccharides by nonthermal technologies, including ultrasound, high hydrostatic pressure, pulsed electric fields, and cold plasma, was provided in this review. In particular, the underlying mechanisms, processing operations, and current application status of these technologies were discussed. In addition, the applications of combining nonthermal techniques with other technological methods in polysaccharide extraction and modification were briefly introduced.

Sonication, a Potential Technique for Extraction of Phytoconstituents: A Systematic Review

Traditional extraction techniques have lost their optimum performance because of rising consumer demand and novel technologies. In this regard, several techniques were developed by humans for the extraction of plant materials from various indigenous sources, which are no longer in use. Many of the techniques are not efficient enough to extract maximum plant material. By this time, evolution in extraction has led to development of various techniques including microfiltration, pulsed electric fields, high pressure, microwave assistance, enzyme assistance, supercritical fluid, subcritical fluid and ultrasonication. These innovations in food processing/extraction are known as “Green Food Processing”. These technologies were basically developed by focusing on three universal parameters: simplicity, energy efficiency and economy. These green technologies are practical in a number of different food sectors, mostly for preservation, inhibition of microorganisms, inactivation of enzymes and extraction of plant material. Like the others, ultrasonication could also be used for the said purposes. The primary objective of this review is to confine the potential use of ultrasonication for extraction of oils, pectin and phytochemicals by reviewing the literature systematically.