Effect of nanoemulsion-loaded hybrid biopolymeric hydrogel beads on the release kinetics, antioxidant potential and antibacterial activity of encapsulated curcumin

Effect of peach gum polysaccharide on the rheological and 3D printing properties of gelatin-based functional gummy candy

Excellent 3D printing materials must exhibit good extrudability and supportability, but these two characteristics are often contradictory. In this study, peach gum polysaccharide (PGP) was added to gelatin to prepare a 3D-printed functional gummy candy encapsulating curcumin. Rheology tests indicated that adding PGP could effectively improve the apparent viscosity and thermal stability and consequently improve the 3D printability and supportability of the products. When PGP addition was 6 %, the printing accuracy was higher than 90 %. Texture and microstructure analysis further revealed that PGP addition promoting a dense gel structure formed and the water holding capacity and supportability of gel materials were enhanced. Furthermore, the in vitro gastrointestinal digestion tests showed that after 6 h of simulated gastrointestinal fluid digestion, the retention rate of curcumin was nearly 80 %. The above results indicated that the composite gel of PGP and gelatin is a good 3D printing base material for nutrient delivery.

Improving stability and bioavailability of curcumin by quaternized chitosan coated nanoemulsion

This study aims to enhance the stability and bioavailability of curcumin (Cur) using nanoemulsion coating technology. The nanoemulsion system was developed by encapsulating Cur with quaternized chitosan (QMNE), and the nanoemulsion containing Cur and medium-chain triglyceride (MCT) oil (MNE) was used as control sample. The microstructure of the nanoemulsion was examined using Dynamic light scattering (DLS), Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). The storage, thermal, ionic strength, and pH stability of QMNE were also evaluated, respectively. The results indicate that QMNE demonstrates superior stability, in vitro gastric fluid stability, bioavailability compared to MNE. QMNE exhibits excellent emulsification activity and stability. In addition, QMNE shows significant protection against oxidation in both emulsion systems after different heat treatments. The antimicrobial activity results reveal that QMNE exhibits greater efficacy than that of MNE. Consequently, this study provides valuable insights into the formulation of a system to encapsulate Cur and the improvement of its stability and bioavailability.

Curcumin nanoemulsions inhibit oral squamous cell carcinoma cell proliferation by PI3K/Akt/mTOR suppression and miR-199a upregulation: A preliminary study

BACKGROUND

Accumulating evidence indicates that curcumin (CUR) has anticancer properties in various cancers including oral squamous cell carcinoma (OSCC), but CUR is greatly restricted in clinical studies and applications due to its low bioavailability. Interestingly, the bioavailability of CUR was found to be significantly improved using loaded lipid nanoemulsions (NEs).

OBJECTIVES

To investigate the effect of CUR-NEs on cell proliferation of OSCC HSC-3 cells in vitro, and explore the potential mechanism of this effect in a preliminary study.

RESULTS

CUR-NEs exhibited significantly cytotoxic effects on OSCC cells in a dose-dependent manner, compared with the control. The percentage of cells in proliferative phases (S + G2/M) was gradually decreased in a dose- or time-dependent manner caused by CUR-NEs. Moreover, CUR-NEs downregulated the protein expression of PI3K/Akt/mTOR and upregulated the expression of miR-199a that targeted PI3K in a dose- or time-dependent manner in OSCC cells. Importantly, CUR-NEs cloud effectively counteract the influence on cell proliferation of OSCC cells and the proliferative phases of cell cycle caused by miR-199a inhibitor a time-dependent manner.

CONCLUSIONS

This in vitro preliminary study indicated that CUR-NEs may be an effective therapeutic agent for OSCC. Such effects could be related to inhibition of OSCC cell proliferation by PI3K/Akt/mTOR suppression and miR-199a upregulation.

Development and characterization of antimicrobial alginate hydrogel beads filled with cinnamon essential oil nanoemulsion

The aim of the present study was to investigate the characteristics of alginate beads filled with cinnamon essential oil nanoemulsions (CEONs). The influence of the alginate and CaCl2 concentrations on their physical, antimicrobial and antioxidant properties was studied. The droplet size of CEON was 146.20 ± 39.28 nm and the zeta potential was -33.8 ± 0.72 mV demonstrating proper nanoemulsions stability. Decreasing the alginate and CaCl2 concentrations resulted in higher EOs release due to the increased pore size of the alginate beads. The scavenging activity of DPPH of beads was found to be dependent on the alginate and calcium ion concentrations which affected the pore size of the fabricated beads. The FT-IR results declared the new bands in the spectra of filled hydrogel beads, which verified the encapsulation of EOs in the beads. The surface morphology of beads was studied using SEM images which showed the spherical shape and porous structure of alginate beads. In addition, the alginate beads filled with CEO nanoemulsion demonstrated strong antibacterial activity.

Preparation of carboxymethylcellulose / ZnO / chitosan composite hydrogel microbeads and its drug release behaviour

In this study, a novel carboxymethylcellulose / ZnO / chitosan (CMC / ZnO / Cs) hydrogel microbeads loaded with crosslinked porous starch / curcumin (CPS / Cur) were designed and prepared to improve the encapsulation efficiency of curcumin for drug delivery to specific sites. It was found that the total pore volume of crosslinked porous starch (CPS) was increased by 1150 % when compared to the native starch (NS), and the adsorption ratio of curcumin by CPS was enhanced by 27 % when compared to NS. Secondly, the swelling ratio of composite hydrogel microbeads was within 25 % in an acidic environment at pH 1.2, and the swelling ratio of hydrogel microbeads sharply increased to 320 % ~ 370 % at pH 6.8 and 7.4. In addition, the results of in vitro simulated release experiments showed that the released amount of hydrogel microbeads loaded with NS/Cur and CPS/Cur in SGF were within 7 % in simulated gastric fluid (SGF). The highest released amount of curcumin was 65.26 % for hydrogel beads loaded with CPS/Cur, which was 26 % lower than that of hydrogel microbeads loaded with Cur in simulated intestinal fluid (SIF). In simulated colonic fluid (SCF), the released amount of hydrogel microbeads loaded with CPS/Cur and Cur were 73.96 % and 91.69 %, respectively. In conclusion, pH-sensitive drug delivery system with good drug stability and bioavailability were successfully prepared with carboxymethylcellulose / ZnO / chitosan bead, suitable targeting drug delivery to the small intestine.

Oral hydrogel nanoemulsion co-delivery system treats inflammatory bowel disease via anti-inflammatory and promoting intestinal mucosa repair

BACKGROUND

Due to oral nano-delivery systems for the treatment of inflammatory bowel disease (IBD) are often failed to accumulated to the colonic site and could not achieve controlled drug release, it's urgent to develop a microenvironment responsive drug delivery to improve therapy efficacy. Inflammation at the IBD site is mainly mediated by macrophages, which are the key effector cells. Excessive inflammation leads to oxidative stress and intestinal mucosal damage. The use of curcumin (CUR) and emodin (EMO) together for the treatment of IBD is promising due to their respective anti-inflammatory and intestinal mucosal repair effects. In view of the pH gradient environment of gastrointestinal tract, here we prepared pH-responsive sodium alginate (SA) hydrogel-coated nanoemulsions to co-deliver CUR and EMO (CUR/EMO NE@SA) to achieve controlled drug release and specifically target macrophages of the colon.

RESULTS

In this study, a pH-responsive CUR/EMO NE@SA was successfully developed, in which the CUR/EMO NE was loaded by chitosan and further crosslinked with sodium alginate. CUR/EMO NE@SA had a pH-responsive property and could achieve controlled drug release in the colon. The preparation could significantly alleviate and improve the colon inflammatory microenvironment by decreasing TNF-α and IL-6 expression, increasing IL-10 expression, scavenging reactive oxygen species in macrophages, and by ameliorating the restoration of intestinal mucosal tight junction protein expression. Furthermore, we revealed the molecular mechanism of the preparation for IBD treatment, which might due to the CUR and EMO synergic inhibition of NF-κB to improve the pro-inflammatory microenvironment. Our study provides a new IBD therapy strategy via synergically inhibiting inflammatory, repairing mucosal and clearing ROS by pH-sensitive hydrogel-encapsulated nanoemulsion drug delivery system, which might be developed for other chronic inflammatory disease treatment.

CONCLUSIONS

It's suggested that pH-sensitive hydrogel-coated nanoemulsion-based codelivery systems are a promising combinatorial platform in IBD.

Antibacterial, antifungal, and antioxidant competence of Cardiospermum halicacabum based nanoemulsion and characterized their physicochemical properties

This research was designed to evaluate the pharmaceutical potentials of various proportions of nanoemulsions, Cardiospermum halicacabum Nanoemulsion A and Cardiospermum halicacabum Nanoemulsion B (CHE-NE-A & CHE-NE-B) prepared from the hydroalcoholic extract of Cardiospermum halicacabum through in vitro approach, and their physicochemical properties were characterized using standard scientific analytical techniques. The physicochemical and morphological properties of CHE-NE-A and CHE-NE-B were characterized by FTIR, SEM, TEM, zeta potential, and scattering light intensity analyses. The results revealed that the size, shape, and exterior conditions of nano-droplets of the CHE-NE-A nanoemulsion were suitable as a drug carrier. The reports obtained from in vitro drug releasing potential analysis support this as well. CHE-NE-A nanoemulsion constantly removes the drug from the dialysis bag than CHE-NE-B. Moreover, the CHE-NE-A showed considerable dose-dependent antioxidant activity on DPPH, ABTS, and FRAP free radicals. CHE-NE-A and CHE-NE-B were tested for their antibacterial activity with various bacterial strains. The results demonstrated that the CHE-NE-A nanoemulsion showed remarkable antibacterial activity (zone of inhibition) against test bacterial pathogens than CHE-NE-B. The antibacterial activity of CHE-NE-A at a concentration of 200 µg mL-1was in the following order, P. aeruginosa > S. aureus > S. typhimurium > S. pneumoniae > E. coli. Furthermore, CHE-NE-A has the lowest MIC values against these test bacterial pathogens than CHE-NE-B. Moreover, the CHE-NE-A also demonstrated good antifungal activity against the test fungal pathogens such as Cryptococcus neoformans, Aspergillus niger, Candida pneumonia, and Penicillium expansum than CHE-NE-B. These results strongly suggest that the CHE-NE-A nanoemulsion possesses considerable pharmaceutical potential. Interestingly, the physicochemical properties also rope that the CHE-NE-A nanoemulsion may be considered a drug carrier and useful for drug formulation.

Research progress of polyphenols in nanoformulations for antibacterial application

Infectious disease is one of the top 10 causes of death worldwide, especially in low-income countries. The extensive use of antibiotics has led to an increase in antibiotic resistance, which poses a critical threat to human health globally. Natural products such as polyphenolic compounds and their derivatives have been shown the positive therapeutic effects in antibacterial therapy. However, the inherent physicochemical properties of polyphenolic compounds and their derivatives limit their pharmaceutical effects, such as short half-lives, chemical instability, low bioavailability, and poor water solubility. Nanoformulations have shown promising advantages in improving antibacterial activity by controlling the release of drugs and enhancing the bioavailability of polyphenols. In this review, we listed the classification and antibacterial mechanisms of the polyphenolic compounds. More importantly, the nanoformulations for the delivery of polyphenols as the antibacterial agent were summarized, including different types of nanoparticles (NPs) such as polymer-based NPs, metal-based NPs, lipid-based NPs, and nanoscaffolds such as nanogels, nanofibers, and nanoemulsions. At the same time, we also presented the potential biological applications of the nano-system to enhance the antibacterial ability of polyphenols, aiming to provide a new therapeutic perspective for the antibiotic-free treatment of infectious diseases.

Recent advance in bioactive hydrogels for repairing spinal cord injury: material design, biofunctional regulation, and applications

Functional hydrogels show potential application in repairing spinal cord injury (SCI) due to their unique chemical, physical, and biological properties and functions. In this comprehensive review, we present recent advance in the material design, functional regulation, and SCI repair applications of bioactive hydrogels. Different from previously released reviews on hydrogels and three-dimensional scaffolds for the SCI repair, this work focuses on the strategies for material design and biologically functional regulation of hydrogels, specifically aiming to show how these significant efforts can promoting the repairing performance of SCI. We demonstrate various methods and techniques for the fabrication of bioactive hydrogels with the biological components such as DNA, proteins, peptides, biomass polysaccharides, and biopolymers to obtain unique biological properties of hydrogels, including the cell biocompatibility, self-healing, anti-bacterial activity, injectability, bio-adhesion, bio-degradation, and other multi-functions for repairing SCI. The functional regulation of bioactive hydrogels with drugs/growth factors, polymers, nanoparticles, one-dimensional materials, and two-dimensional materials for highly effective treating SCI are introduced and discussed in detail. This work shows new viewpoints and ideas on the design and synthesis of bioactive hydrogels with the state-of-the-art knowledges of materials science and nanotechnology, and will bridge the connection of materials science and biomedicine, and further inspire clinical potential of bioactive hydrogels in biomedical fields.

Fabrication, in-vitro digestion and pH-responsive release behavior of soy protein isolate glycation conjugates-based hydrogels

Hydrogel made by glycated soy protein isolate (SPI) conjugates is a promising gastrointestinal targeted delivery system for bioactives. In this study, SPI conjugates were prepared with dextran molecules at various molecular weights by Maillard reaction -based heating, and then used to fabricate hydrogel aided by transglutaminase. The modification on the structure, interfacial and rheological properties of SPI by dextran was studied. The physicochemical properties, digestion behavior and curcumin-encapsulation capacity of resultant SPI-dextran hydrogels were comprehensively studied. As compared to SPI and SPI-glucose conjugates-based hydrogels, SPI-dextran hydrogels showed lower mechanical properties but more homogeneous gel network. Dextran with higher molecular weight showed lower grafting degree on SPI, but was more effective on improving the thermos-set gel performance, and resistance to in vitro gastrointestinal digestion. The contribution of glycinin and β-conglycinin, two major individual proteins of SPI, in the dextran conjugates formation were predicated by molecular docking for the first time. The impact of molecular weight of dextran on glycated SPI hydrogel-based delivery systems was comprehensively investigated, which is promising for development of functional food applications.

Curcumin-loaded Butea monosperma gum-based hydrogel: A new excipient for controlled drug delivery and anti-bacterial applications

The wide spectrum of applications provided by curcumin has attracted researchers worldwide to identify its molecular targets and employ it in various biomedical applications. The present research work focuses on the development of a Butea monosperma gum-based hydrogel encapsulated with curcumin and further employing it for two diverse applications, i.e., drug delivery and anti-bacterial application. A central composite design was utilized for the optimization of significant process variables to achieve maximum swelling. A maximum of 662 % swelling was attained at the initiator (0.06 g), monomer (3 ml), crosslinker (0.08 g), solvent (14 ml), and time (60 s). Furthermore, the characterization of the synthesized hydrogel was performed via FTIR, SEM, TGA, H1-NMR, and XRD analysis. Various important properties like swelling rate under different solutions, water retention capacity, re-swelling capability, porosity, and density measurement suggested that the prepared hydrogel exhibited a highly stable crosslinked network with high porosity (0.23) and density (62.5 g/cm³) values. The encapsulation efficiency of curcumin in the hydrogel was reported to be 93 % and 87.3 %, respectively, wherein BM-g-poly(AA) ~ Cur exhibited excellent sustained pH-responsive site release of curcumin at two different pH values, with the maximum amount of release taking place at pH 7.4 (792 ppm) and a minimum at pH 5 (550 ppm) due to the lesser ionization of the functional groups present in the hydrogel at a lower pH value. Additionally, the results from the pH shock studies indicated our material to be stable and efficient even with fluctuations in pH, resulting in the optimal amount of drug release at each pH range. Furthermore, anti-bacterial studies revealed that the synthesized BM-g-poly(AA) ~ Cur was effective against both gram-negative and gram-positive bacteria, with maximum values of zones of inhibition of 16 mm in diameter, thereby showing the best results in comparison to the already developed matrices to date. As a result, the newly discovered BM-g-poly(AA) ~ Cur properties reflect the hydrogel network's suitability for drug release and anti-bacterial applications.

Effective drug combinations of betulinic acid and ceranib-2 loaded Zn:MnO2 doped-polymeric nanocarriers against PC-3 prostate cancer cells

The development of theranostic nanocarriers with synergistic drug combinations has received considerable attention due to their improved pharmaceutical activity. Herein, we reported an investigation about the in-vitro anticancer activity of ceranib-2 (Cer), betulinic acid (BA), and the combination of betulinic acid and ceranib-2 (BA-Cer) against PC-3 prostate cancer cells. For this purpose, first we designed a suitable nanocarrier using a novel Zn:MnO₂ nanocomposite (NCs) and gallic acid (GA)-polylactic acid (PLA)-Alginate polymeric shell with nanoscale particle size and good stability. Chemical statements, morphology, and physicochemical properties of the nanocarrier have been illuminated with advanced characterization techniques. According to the transmission electron microscopy (TEM) results, Zn:MnO₂ NCs had a spherical and monodispersed morphology with a 2.03 ± 0.67 nm diameter. Moreover, vibrating-sample magnetometer (VSM) results showed that Zn:MnO₂ had paramagnetic properties with a saturation magnetization (Ms) value of 1.136 emu/g. Additionally, the in-vitro cytotoxic effects of the single and binary drugs loaded Zn:MnO₂-doped polymeric nanocarriers against PC-3 prostate cancer cells were investigated. According to the results, there was no significant cytotoxic effect of free BA and Cer against PC-3 prostate cancer cells. However, BA/Zn:MnO₂@GA-PLA-Alginate NCs, BA-Cer/Zn:MnO₂ @GA-PLA-Alginate NCs and free BA-Cer had IC₅₀ values of 6.498, 7.351, and 18.571 μg/mL, respectively. Consequently, BA-Cer/Zn:MnO₂@GA-PLA-Alginate is a nanocarrier with good stability, enhanced drug loading and release capacity for hydrophobic drugs, as well as being used as both imaging and treatment agent due to its magnetic properties. Furthermore, BA and Cer drug combination showed great promise in prostate cancer therapy which is known to be resulted high drug resistance. We strongly believed that this work could lead to an investigation of the molecular mechanisms of BA-mediated cancer theapy.

Synthesis and Biological Activity Evaluations of Green ZnO-Decorated Acid-Activated Bentonite-Mediated Curcumin Extract (ZnO@CU/BE) as Antioxidant and Antidiabetic Agents

Green ZnO-decorated acid-activated bentonite-mediated curcumin extract (ZnO@CU/BE) was prepared as a multifunctional antioxidant and antidiabetic agent based on the extract of curcumin, which was used as a reducing and capping reagent. ZnO@CU/BE showed notably enhanced antioxidant properties against nitric oxide (88.6 ± 1.58%), 1,1-diphenyl-2-picrylhydrazil (90.2 ± 1.76%), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (87.3 ± 1.61%), and superoxide (39.5 ± 1.12%) radicals. These percentages are higher than the reported values of ascorbic acid as a standard and the integrated components of the structure (CU, BE/CU, and ZnO). This signifies the impact of the bentonite substrate on enhancing the solubility, stability, dispersion, and release rate of the intercalated curcumin-based phytochemicals, in addition to enhancing the exposure interface of ZnO nanoparticles. Therefore, effective antidiabetic properties were observed, with significant inhibition effects on porcine pancreatic α-amylase (76.8 ± 1.87%), murine pancreatic α-amylase (56.5 ± 1.67%), pancreatic α-glucosidase (96.5 ± 1.07%), murine intestinal α-glucosidase (92.5 ± 1.10%), and amyloglucosidase (93.7 ± 1.55%) enzymes. These values are higher than those determined using commercial miglitol and are close to the values measured using acarbose. Hence, the structure can be applied as an antioxidant and antidiabetic agent.

Synthesis and Characterization of Green Zinc-Metal-Pillared Bentonite Mediated Curcumin Extract (Zn@CN/BE) as an Enhanced Antioxidant and Anti-Diabetes Agent

Green zinc-metal-pillared bentonite mediated curcumin extract (Zn@CN/BE) was synthesized and characterized as a low-cost and multifunctional (curcumin-based phytochemicals, zinc-capped curcumin, zinc/curcumin complexes, and zinc-pillared bentonite) antioxidant and antidiabetic agent with enhanced activity. The activities of the Zn@CN/BE structure were assessed in comparison with curcumin and ZnO as individual components and in the presence of miglitol and acarbose commercial drugs as controls. The structure validated remarkable antioxidant activities against the common oxidizing radicals (nitric oxide (94.7 ± 1.83%), DPPH (96.4 ± 1.63%), ABTS (92.8 ± 1.33%), and superoxide (62.3 ± 1.63 %)) and inhibition activities against the main oxidizing enzymes (porcine α-amylase (89.3 ± 1.13%), murine α-amylase (70.8 ± 1.54%), pancreatic α-Glucosidase (99.3 ± 1.23%), intestinal α-Glucosidase (97.7 ± 1.24%), and amyloglucosidase (98.4 ± 1.64%)). The reported activities are higher than the activities of individual components and the studied ascorbic acid as well as the commercial drugs. This enhancement effect was assigned to the impact of the zinc pillaring process within the curcumin/bentonite host, which induced the stability, dispersions, and interactive interface of the essential active compounds in addition to the solubility and release rate of the intercalated curcumin extract. This paper recommends the application of the Zn@CN/BE structure as an enhanced, low-cost, biocompatible, safe, and simply produced antioxidant and antidiabetic agent.

Ultrasound-Assisted Encapsulation of Citronella Oil in Alginate/Carrageenan Beads: Characterization and Kinetic Models

The objective of this research was to investigate the effect of ultrasonication on citronella oil encapsulation using alginate/carrageenan (Alg/Carr) in the presence of sodium dodecyl sulfate (SDS). The functional groups of microparticles were characterized using Fourier transform infrared spectroscopy (FTIR), and the beads’ morphologies were observed using a scanning electron microscope (SEM). The FTIR results showed that the ultrasonication process caused the C-H bonds (1426 cm−1) to break down, resulting in polymer degradation. The SEM results showed that the ultrasonication caused the presence of cavities or pores in the cracked wall and a decrease in the beads’ size. In this study, the use of ultrasound during the encapsulation of citronella oil in Alg/Carr enhanced the encapsulation efficiency up to 95–97%. The kinetic evaluation of the oil release of the beads treated with ultrasound (UTS) showed a higher k1 value of the Ritger–Peppas model than that without ultrasonication (non-UTS), indicating that the oil release rate from the beads was faster. The R/F value from the Peppas–Sahlin model of the beads treated with UTS was smaller than that of the non-UTS model, revealing that the release of bioactive compounds from the UTS-treated beads was diffusion-controlled rather than due to a relaxation mechanism. This study suggests the potential utilization of UTS for controlling the bioactive compound release rate.

Binary Hydrogels: Induction Methods and Recent Application Progress as Food Matrices for Bioactive Compounds Delivery-A Bibliometric Review

Food hydrogels are biopolymeric materials made from food-grade biopolymers with gelling properties (proteins and polysaccharides) and a 3D network capable of incorporating large amounts of water. They have sparked considerable interest because of their potential and broad application range in the biomedical and pharmaceutical sectors. However, hydrogel research in the field of food science is still limited. This knowledge gap provides numerous opportunities for implementing their unique properties, such as high water-holding capacity, moderated texture, compatibility with other substances, cell biocompatibility, biodegradability, and high resemblance to living tissues, for the development of novel, functional food matrices. For that reason, this article includes a bibliometric analysis characterizing research trends in food protein-polysaccharide hydrogels (over the last ten years). Additionally, it characterizes the most recent developments in hydrogel induction methods and the most recent application progress of hydrogels as food matrices as carriers for the targeted delivery of bioactive compounds. Finally, this article provides a future perspective on the need to evaluate the feasibility of using plant-based proteins and polysaccharides to develop food matrices that protect nutrients, including bioactive substances, throughout processing, storage, and digestion until they reach the specific targeted area of the digestive system.

Electrospun Core–Sheath Nanofibers with Variable Shell Thickness for Modifying Curcumin Release to Achieve a Better Antibacterial Performance

The inefficient use of water-insoluble drugs is a major challenge in drug delivery systems. Core–sheath fibers with various shell thicknesses based on cellulose acetate (CA) were prepared by the modified triaxial electrospinning for the controlled and sustained release of the water-insoluble Chinese herbal active ingredient curcumin. The superficial morphology and internal structure of core–sheath fibers were optimized by increasing the flow rate of the middle working fluid. Although the prepared fibers were hydrophobic initially, the core–sheath structure endowed fibers with better water retention property than monolithic fibers. Core–sheath fibers had flatter sustained-release profiles than monolithic fibers, especially for thick shell layers, which had almost zero-order release for almost 60 h. The shell thickness and sustained release of drugs brought about a good antibacterial effect to materials. The control of flow rate during fiber preparation is directly related to the shell thickness of core–sheath fibers, and the shell thickness directly affects the controlled release of drugs. The fiber preparation strategy for the precise control of core–sheath structure in this work has remarkable potential for modifying water-insoluble drug release and improving its antibacterial performance.

Bovine Serum Albumin-Based Nanoparticles: Preparation, Characterization, and Antioxidant Activity Enhancement of Three Main Curcuminoids from Curcuma longa

Bovine Serum Albumin (BSA) lipid hybrid nanoparticles are part of the new solutions to overcome low bioavailability of poor solubility drugs such as curcuminoids, which possess multiple biological advantages; however, they are counterbalanced by its short biological half-life. In this line, we prepared the three main curcuminoids: curcumin (CUR), desmethoxycurcumin (DMC), and bisdemethoxycurcumin (BDM)-loaded BSA nanoparticles. The three formulations were characterized by the average size, size distribution, crystallinity, weight loss, drug release, kinetic mechanism, and antioxidant activity. The developed method produced CUR-, DMC-, and BDM-loaded BSA nanoparticles with a size average of 15.83 ± 0.18, 17.29 ± 3.34, and 15.14 ± 0.14 nm for CUR, DMC, and BDM loaded BSA, respectively. FT-IR analysis confirmed the encapsulation, and TEM images showed their spherical shape. The three formulations achieved encapsulation efficiency upper to 96% and an exhibited significantly increased release from the nanoparticle compared to free compounds in water. The antioxidant activity was enhanced as well, in agreement with the improvement in water release, obtaining IC₅₀ values of 9.28, 11.70, and 15.19 µg/mL for CUR, DMC, and BDM loaded BSA nanoparticles, respectively, while free curcuminoids exhibited considerably lower antioxidant values in aqueous solution. Hence, this study shows promises for such hybrid systems, which have been ignored so far, regarding proper encapsulation, protection, and delivery of curcuminoids for the development of functional foods and pharmaceuticals.

Antimicrobial Potential of Curcumin: Therapeutic Potential and Challenges to Clinical Applications

Curcumin is a bioactive compound that is extracted from Curcuma longa and that is known for its antimicrobial properties. Curcuminoids are the main constituents of curcumin that exhibit antioxidant properties. It has a broad spectrum of antibacterial actions against a wide range of bacteria, even those resistant to antibiotics. Curcumin has been shown to be effective against the microorganisms that are responsible for surgical infections and implant-related bone infections, primarily Staphylococcus aureus and Escherichia coli. The efficacy of curcumin against Helicobacter pylori and Mycobacterium tuberculosis, alone or in combination with other classic antibiotics, is one of its most promising antibacterial effects. Curcumin is known to have antifungal action against numerous fungi that are responsible for a variety of infections, including dermatophytosis. Candidemia and candidiasis caused by Candida species have also been reported to be treated using curcumin. Life-threatening diseases and infections caused by viruses can be counteracted by curcumin, recognizing its antiviral potential. In combination therapy with other phytochemicals, curcumin shows synergistic effects, and this approach appears to be suitable for the eradication of antibiotic-resistant microbes and promising for achieving co-loaded antimicrobial pro-regenerative coatings for orthopedic implant biomaterials. Poor water solubility, low bioavailability, and rapid degradation are the main disadvantages of curcumin. The use of nanotechnologies for the delivery of curcumin could increase the prospects for its clinical application, mainly in orthopedics and other surgical scenarios. Curcumin-loaded nanoparticles revealed antimicrobial properties against S. aureus in periprosthetic joint infections.