A review of recent compound-specific isotope analysis studies applied to food authentication

Isotopic, mycotoxin, and pesticide analysis for organic authentication along the production chain of wheat-derived products

Wheat-based products are staples in diets worldwide. Organic food frauds continuously threaten consumer trust in the agri-food system. A multi-method approach was conducted for the organic authentication and safety assessment of pasta and bakery products along their production chain. Bulk and Compound-Specific (CS) Isotope Ratio Mass Spectrometry (IRMS) suggested the δ15Nbulk, δ15Nleucine and δ15Nproline as promising organic markers, with CS able to distinguish between pairs which bulk analysis could not. Processing significantly affected the values of δ15Nleucine, δ13Cproline and δ13Cleucine. Multi-mycotoxin analysis (HT-2, T-2, DON, ZEN, OTA, AFB1) revealed higher contamination in conventional than organic samples, while both milling and baking significantly reduced mycotoxin content. Lastly, from the evaluation of 400 residues, isopyrazam was present at the highest concentration (0.12 mg/kg) in conventional wheat, exhibiting a 0.12 Processing Factor (PF), while tebuconazole levels remained unchanged in pasta production (90 °C) and reduced below LOQ in biscuits and crackers (180-250 °C).

Traceability and authentication in agri-food production: A multivariate approach to the characterization ofthe Italian food excellence elephant garlic (Allium ampeloprasum L.), a vasoactive nutraceutical

A research platform for food authentication was set up by combining stable isotope ratio analysis, metabolomics by gas and liquid mass-spectrometry and NMR investigations, chemometric analyses for food excellences. This multi-analytical approach was tested on samples of elephant garlic (Allium ampeloprasum L.), a species belonging to the same genus of common garlic (Allium ampeloprasum L.), mainly produced in southern Tuscany-(Allium ampeloprasum). The isotopic composition allowed the product to be geographically characterized. Flavonoids, like (+)-catechin, cinnamic acids, quercetin glycosides were identified. The samples showed also a significant amount of dipeptides, sulphur-containing metabolites and glutathione, the latter of which could be considered a molecular marker of the analyzed elephant garlic. For nutraceutical profiling to reach quality labels, extracts were investigated in specific biological assays, displaying interesting vasorelaxant properties in rat aorta by mediating nitric oxide release from the endothelium and exhibited positive inotropic and negative chronotropic effects in rat perfused heart.

Gas chromatography-stable isotope ratio mass spectrometry prior solid phase microextraction and gas chromatography-tandem mass spectrometry: development and optimization of analytical methods to analyse garlic (Allium sativum L.) volatile fraction

Garlic (Allium sativum L.) is not only appreciated for its flavour and taste, but it is also recognized for various health properties. The European Commission, through the attribution of the Protected Designation of Origin (PDO) certification mark, has officially recognized some specific varieties of garlic. To protect not only the commercial value but also the reputation of this appreciated product, effective tools are therefore required. For the first time, a new compound specific isotope analysis method based on carbon stable isotopic ratio measurement of the three major volatile garlic compounds allyl alcohol (AA), diallyl disulphide (DD) and diallyl trisulphide (DT) through head-space solid phase microextraction (HS-SPME) followed by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) was developed. A within-day standard deviation (Srwithin-day) of 0.3 ‰, 0.4 ‰ and 0.2 ‰ for δ(13C) and a between-day standard deviation (Srbetween-day) of 0.8 ‰, 1.0 ‰ and 0.6 ‰ of AA, DT and DD was estimated. For the first time, the ranges of isotopic variability for the three volatile compounds of red garlic from two neighbouring Italian regions (Abruzzo and Lazio) were defined analysing 30 samples. The same dataset was also considered in analysing the percentage composition of the previously mentioned three volatile compounds through HS-SPME followed by gas chromatography-tandem mass spectrometry (GC-MS/MS). The two analytical approaches were combined in this explorative study, aiming to provide potential parameters to discriminate garlic samples based on their geographical origin.

Development of sequential online extraction electrospray ionization mass spectrometry for accurate authentication of highly-similar Atractylodis Macrocephalae

The accurate and rapid authentication techniques and strategies for highly-similar foods are still lacking. Herein, a novel sequential online extraction electrospray ionization mass spectrometry (S-oEESI-MS) was developed to achieve spatio-temporally resolved ionization and comprehensive characterization of complex foods with multi-components (high, medium, and low polarity substances). Meanwhile, a characteristic marker screening method and an integrated research strategy based on MS fingerprinting, characteristic marker and chemometrics modeling were established, which are especially suitable for the accurate and rapid authentication of highly-similar foods that are difficult to be authenticated by traditional techniques (e.g., LC-MS). Thirty-two batches of highly-similar Atractylodis macrocephalae rhizome from four different origins were used as model samples. As a result, S-oEESI-MS enabled a more comprehensive MS characterization of substance profiles in complex plant samples in 1.0 min. Further, 22 characteristic markers of Atractylodis macrocephalae were ingeniously screened out and combined with multivariate statistical analysis model, the accurate authentication of highly-similar Atractylodis macrocephalae was realized. This study presents a comprehensive strategy for accurate authentication and origin analysis of highly-similar foods, which has potentially significant applications for ensuring food quality and safety.

Towards Verifying the Imported Soybeans of China Using Stable Isotope and Elemental Analysis Coupled with Chemometrics

Verifying the geographical origin of soybeans (Glycine max [Linn.] Merr.) is a major challenge as there is little available information regarding non-parametric statistical origin approaches for Chinese domestic and imported soybeans. Commercially procured soybean samples from China (n = 33) and soybeans imported from Brazil (n = 90), the United States of America (n = 6), and Argentina (n = 27) were collected to characterize different producing origins using stable isotopes (δ2H, δ18O, δ15N, δ13C, and δ34S), non-metallic element content (% N, % C, and % S), and 23 mineral elements. Chemometric techniques such as principal component analysis (PCA), linear discriminant analysis (LDA), and BP-artificial neural network (BP-ANN) were applied to classify each origin profile. The feasibility of stable isotopes and elemental analysis combined with chemometrics as a discrimination tool to determine the geographical origin of soybeans was evaluated, and origin traceability models were developed. A PCA model indicated that origin discriminant separation was possible between the four soybean origins. Soybean mineral element content was found to be more indicative of origin than stable isotopes or non-metallic element contents. A comparison of two chemometric discriminant models, LDA and BP-ANN, showed both achieved an overall accuracy of 100% for testing and training sets when using a combined isotope and elemental approach. Our findings elucidate the importance of a combined approach in developing a reliable origin labeling method for domestic and imported soybeans in China.

Using plants in forensics: State-of-the-art and prospects

The increasing use of plant evidence in forensic investigations gave rise to a powerful new discipline - Forensic Botany - that analyses micro- or macroscopic plant materials, such as the totality or fragments of an organ (i.e., leaves, stems, seeds, fruits, roots) and tissue (i.e., pollen grains, spores, fibers, cork) or its chemical composition (i. e., secondary metabolites, isotopes, DNA, starch grains). Forensic botanists frequently use microscopy, chemical analysis, and botanical expertise to identify and interpret evidence crucial to solving civil and criminal issues, collaborating in enforcing laws or regulations, and ensuring public health safeguards. The present work comprehensively examines the current state and future potential of Forensic Botany. The first section conveys the critical steps of plant evidence collection, documentation, and preservation, emphasizing the importance of these initial steps in maintaining the integrity of the items. It explores the different molecular analyses, covering the identification of plant species and varieties or cultivars, and discusses the limitations and challenges of these techniques in forensics. The subsequent section covers the diversity of Forensic Botany approaches, examining how plant evidence exposes food and pharmaceutical frauds, uncovers insufficient or erroneous labeling, traces illegal drug trafficking routes, and combats the illegal collection or trade of protected species and derivatives. National and global security issues, including the implications of biological warfare, bioterrorism, and biocrime are addressed, and a review of the contributions of plant evidence in crime scene investigations is provided, synthesizing a comprehensive overview of the diverse facets of Forensic Botany.

Recent advances in whiskey analysis for authentication, discrimination, and quality control

In order to safeguard authentic whiskey products from fraudulent or counterfeit practices, high throughput solutions that provide robust, rapid, and reliable solutions are required. The implementation of some analytical strategies is quite challenging or costly in routine analysis. Qualitative screening of whiskey products has been explored, but due to the nonspecificity of the chemical compounds, a more quantitative confirmatory technique is required to validate the result of the whiskey analysis. Hence, combining analytical and chemometric methods has been fundamental in whiskey sample differentiation and classification. A comprehensive update on the most relevant and current analytical techniques, including spectroscopic, chromatographic, and novel technologies employed within the last 5 years in whiskey analysis for authentication, discrimination, and quality control, are presented. Furthermore, the technical challenges in employing these analytical techniques, future trends, and perspectives are emphasized.

Effects of Thiamethoxam and Fenvalerate Residue Levels on Light-Stable Isotopes of Leafy Vegetables

Accurate identification of the rational and standardized use of pesticides is important for the sustainable development of agriculture while maintaining a high quality. The insecticides thiamethoxam and fenvalerate and the vegetables spinach, cabbage, and lettuce were used here as study objects. Descriptive analysis and primary reaction kinetic equations were used to analyze the changes in metabolic residues of the two insecticides after different numbers of application in three vegetables. The effects of pesticide residue levels on the δ¹³C, δ¹⁵N, δ²H, and δ¹⁸O values of vegetables were analyzed by one-way analysis of variance and correlation analysis. Partial least squares discriminant analysis (PLS-DA) was applied to build discrimination models of the vegetables with different pesticide residues based on stable isotopes. The results showed that the first degradation residues of thiamethoxam and fenvalerate in spinach, cabbage, and lettuce conformed to primary reaction kinetic equations, but the degradation half-lives were long, and accumulation occurred in the second application. The differences in the four stable isotope ratios in the control group of the three vegetables were statistically significant, and two-thirds of the stable isotope ratios in the three vegetables with different numbers of pesticide applications were significantly different. The δ¹³C and δ¹⁵N values of spinach, the δ¹³C, δ¹⁵N, and δ²H values of cabbage, and the δ¹³C, δ¹⁵N, δ²H, and δ¹⁸O values of lettuce were significantly correlated with different residues of thiamethoxam and/or fenvalerate applications. The control groups of the three vegetables, spinach-thiamethoxam-first, spinach-thiamethoxam-second, cabbage-thiamethoxam-second, cabbage-fenvalerate-first, and lettuce-thiamethoxam-first, were fully identified by PLS-DA models, while the identification models of other vegetables containing pesticide residues still need to be further improved. The results provide technical support for identifying the rational use of pesticides in vegetables and provide a reference method for guaranteeing the authenticity of green and organic vegetables.