Importance of acetic acid bacteria in food industry

Dynamic changes in microbiota and metabolome of Kazakh cheese under traditional handicraft

Kazakh cheese is a traditional fermented dairy product. In this study, high-throughput sequencing, HS-SPME-GC-MS/MS, and untargeted metabolomics were employed to investigate the microbial succession and flavor profiles of Kazakh cheese under traditional handicraft. During processing, Lactobacillus and Acetobacter were the dominant bacterial genera, while Pichia and Kluyveromyces were the predominant yeast genera. The predominant volatile compounds identified across different stages were phenethyl alcohol, acetoin, hexanoic acid, and phenethyl acetate, with their maximum concentrations attained at the cheese during ripening (CR) stage. KEGG pathway enrichment analysis identified amino acid metabolism as the most significantly enriched pathway. Furthermore, Spearman correlation analysis revealed a significant association between Pichia, Lactobacillus, Lactococcus, Kluyveromyces, and flavor compounds, suggesting the crucial role of these microbes in flavor development. This study provides a theoretical foundation for enhancing the quality of traditional fermented Kazakh cheese and advancing Xinjiang's specialty dairy industry.

The core microbiomes and associated metabolic potential of water kefir as revealed by pan multi-omics

Water kefir (WK) is an artisanal fermented beverage made from sugary water, optional fruits and WK grains. WK grains can be reused to start new fermentations. Here we investigate the microbial composition and function of 69 WK grains and their ferments by shotgun metagenomics. A subset of samples was subjected to metabolomic, including volatilomic, analysis. The impact of different fermentation practices on microbial composition and fermentation characteristics was analysed and it was noted that, for example, the common practice of drying water kefir grains significantly reduces microbial diversity and negatively impacts subsequent grain growth. Metagenomic analysis allowed the detection of 96 species within WK, the definition of core genera and the detection of different community states after 48 h of fermentation. A total of 485 bacterial metagenome assembled genomes were obtained and 18 putatively novel species were predicted. Metabolite and volatile analysis show associations between key species with flavour compounds. We show the complex microbial composition of WK and links between fermentation practices, microbes and the fermented product. The results can be used as a foundation for the selection of species for large scale WK production with desired flavour profiles and to guide the regulatory framework for commercial WK production.

Acetate production from corn stover hydrolysate using recombinant Escherichia coli BL21 (DE3) with an EP-bifido pathway

BACKGROUND

Acetate is an important chemical feedstock widely applied in the food, chemical and textile industries. It is now mainly produced from petrochemical materials through chemical processes. Conversion of lignocellulose biomass to acetate by biotechnological pathways is both environmentally beneficial and cost-effective. However, acetate production from carbohydrate in lignocellulose hydrolysate via glycolytic pathways involving pyruvate decarboxylation often suffers from the carbon loss and results in low acetate yield.

RESULTS

Escherichia coli BL21 (DE3) was confirmed to have high tolerance to acetate in this work. Thus, it was selected from seven laboratory E. coli strains for acetate production from lignocellulose hydrolysate. The byproduct-producing genes frdA, ldhA, and adhE in E. coli BL21 (DE3) were firstly knocked out to decrease the generation of succinate, lactate, and ethanol. Then, the genes pfkA and edd were also deleted and bifunctional phosphoketolase and fructose-1,6-bisphosphatase were overexpressed to construct an EP-bifido pathway in E. coli BL21 (DE3) to increase the generation of acetate from glucose. The obtained strain E. coli 5K/pFF can produce 22.89 g/L acetate from 37.5 g/L glucose with a yield of 0.61 g/g glucose. Finally, the ptsG gene in E. coli 5K/pFF was also deleted to make the engineered strain E. coli 6K/pFF to simultaneously utilize glucose and xylose in lignocellulosic hydrolysates. E. coli 6K/pFF can produce 20.09 g/L acetate from corn stover hydrolysate with a yield of 0.52 g/g sugar.

CONCLUSION

The results presented here provide a promising alternative for acetate production with low cost substrate. Besides acetate production, other biotechnological processes might also be developed for other acetyl-CoA derivatives production with lignocellulose hydrolysate through further metabolic engineering of E. coli 6K/pFF.

Regional aroma characteristics of spontaneously fermented Cabernet Sauvignon wines produced from seven sub-regions in Shangri-La of China

Shangri-La is a promising wine region in China, which has great potential for producing high-quality wines with distinctive regional characteristics. In this work, the aroma properties of spontaneously fermented Cabernet Sauvignon wines produced from seven sub-regions of Shangri-La (Adong, Liutongjiang, Sinong, Xidang, and Nitong from Lancang River basin; Benzilan and Dari from Jinsha River Basin) were comprehensively analyzed using the headspace micro-extraction with gas chromatography-mass spectrometry, odor activity values, and olfactory evaluation. Results showed that a total of 59 volatiles belonging to seven groups were identified and quantified in all regional wines, with alcohols constituting the most abundant group, followed by esters and volatile fatty acids. Based on their odor activity values, six alcohols, seven esters, two terpenes, one C13-norisoprenoids, and three volatile fatty acids were identified as key volatiles which significantly contribute to the aroma of these wines. Principal component analysis showed the distinct compositions of these 19 key volatiles among the seven regional wines. Olfactory evaluation revealed certain differences in aroma profiles, particularly "Tropical fruit", "Dried fruit", "Vegetal", and "Sweet" among them. This study enhances our understanding on the unique terroir flavors of Shangri-La wines and is helpful for further producing high-quality wines with regional characteristics.

Comprehensive rheological analysis of structurally related acetan-like heteroexopolysaccharides from two Kozakia baliensis strains in surfactants and galactomannan blends

Natural biopolymers become increasingly attractive as bio-based alternatives to petrol-based rheological modifiers, especially in personal care applications. However, many polysaccharides exhibit undesired properties in cosmetic applications such as limited viscosifying characteristics, unpleasant sensory properties, or incompatibility with certain formulation compounds. Here, a comprehensive rheological analysis of non-decorated acetan-like heteroexopolysaccharides derived from two Kozakia baliensis strains was performed in selected surfactant formulations. The results were compared to native xanthan gum and a genetically engineered xanthan variant, Xan∆gumFGL, which lacks any acetyl- and pyruvyl moieties and whose rheological properties are unaffected by saline environments. All four polysaccharides displayed a highly similar rheological performance in the non-ionic surfactant lauryl glucoside, while the rheological properties differed in amphoteric and anionic surfactants cocamidopropyl betaine and sodium laureth sulfate due to minor changes in side chain composition. Polysaccharide precipitation was observed in the presence of the cationic surfactant. Nevertheless, the native heteroexopolysaccharide derived from K. baliensis LMG 27018 shows significant potential as a salt-independent rheological modifier compared to the genetically engineered Xan∆gumFGL variant. In addition, blends of heteroexopolysaccharides from K. baliensis and several galactomannans displayed synergistic effects which were comparable to native xanthan gum-galactomannan blends. This study shows that heteroexopolysaccharides of K. baliensis are capable of further extending the portfolio of bio-based rheological modifiers.

Microbial dynamics and quality characteristics of spontaneously fermented salamis produced by replacing pork fat with avocado pulp

The aim of this study was to develop a novel and healthier fermented meat product by replacing pork fat with avocado pulp (AVP) during salami production. Experimental salamis were produced under laboratory conditions by substituting pork fat with AVP partially (10-AVP) and totally (20-AVP), while control salamis (CTR) remained AVP-free. The microbial composition of control and experimental salamis was assessed using a combined culture-dependent and -independent approach. Over a 20-days ripening period, lactic acid bacteria, coagulase-negative staphylococci, and yeasts dominated the microbial community, with approximate levels of 9.0, 7.0 and 6.0 log CFU/g, respectively. Illumina technology identified 26 taxonomic groups, with leuconostocs being the predominant group across all trials [constituting 31.26-59.12 % of relative abundance (RA)]. Gas Chromatography-Mass Spectrometry (GC-MS) analysis revealed changes in fatty acid composition and volatile organic compounds due to the substitution of pork fat with AVP. Specifically, monounsaturated fatty acids and terpene compounds increased, while saturated fatty acids and lipid oxidation products decreased. Although AVP influenced the sensory characteristics of the salamis, the highest overall satisfaction ratings were observed for the 10-AVP salamis. Consequently, substituting pork fat with AVP emerges as a viable strategy for producing healthier salamis and diversifying the meat product portfolio.

Volatilome, Microbial, and Sensory Profiles of Coffee Leaf and Coffee Leaf-Toasted Maté Kombuchas

Kombucha is a fermented beverage traditionally made from the leaves of Camelia sinensis. The market has drastically expanded recently, and the beverage has become more elaborated with new, healthy food materials and flavors. Pruning and harvesting during coffee production may generate tons of coffee leaves that are discarded although they contain substantial amounts of bioactive compounds, including those found in maté tea and coffee seeds. This study characterized the changes in volatilome, microbial, and sensory profiles of pure and blended arabica coffee leaf tea kombuchas between 3-9 days of fermentation. Acceptance was also evaluated by consumers from Rio de Janeiro (n = 103). Kombuchas (K) were prepared using black tea kombucha starter (BTKS) (10%), sucrose (10%), a symbiotic culture of Bacteria and Yeasts (SCOBY) (2.5%), and a pure coffee leaf infusion (CL) or a 50:50 blend with toasted maté infusion (CL-TM) at 2.5%. The RATA test was chosen for sensory profile characterization. One hundred volatile organic compounds were identified when all infusions and kombucha samples were considered. The potential impact compounds identified in CL K and CL-TM K were: methyl salicylate, benzaldehyde, hexanal, nonanal, pentadecanal, phenylethyl-alcohol, cedrol, 3,5-octadien-2-one, β-damascenone, α-ionone, β-ionone, acetic acid, caproic acid, octanoic acid, nonanoic acid, decanoic acid, isovaleric acid, linalool, (S)-dihydroactinidiolide, isoamyl alcohol, ethyl hexanoate, and geranyl acetone. Aroma and flavor descriptors with higher intensities in CL K included fruity, peach, sweet, and herbal, while CL-TM K included additional toasted mate notes. The highest mean acceptance score was given to CL-TM K and CL K on day 3 (6.6 and 6.4, respectively, on a nine-point scale). Arabica coffee leaf can be a co-product with similar fingerprinting to maté and black tea, which can be explored for the elaboration of potentially healthy fermented beverages in food industries.

The impact of environmental conditions and milk type on microbial communities of wooden vats and cheeses produced therein

Wooden vats are used in the production of some traditional cheeses as the biofilms on wooden vat surfaces are known to transfer large quantities of microbes to cheese. Variability in microbial communities on wooden vats could lead to inconsistent cheese production. In the present study, the influences of environmental conditions and milk type (raw or heat-treated) on the microbial composition of vat biofilms and cheeses made in the vats were studied using amplicon sequencing of bacterial 16S rRNA and fungal internal transcribed spacer genes. Results showed that the microbial composition of biofilms was influenced by environmental conditions but not the milk type used in cheese production. The microbial composition of cheeses can be further affected by bacterial contributions from milk and the selective forces of environmental conditions. Results of this study suggest that controlling environmental conditions could maintain a more consistent microbial composition of biofilms on wooden vats and resulting cheeses. The use of wooden vats coupled with heat-treated milk at one or more stages of cheese production might be a viable approach to produce cheese with high microbial diversities and reduce risks of undesirable microbes related to food safety and quality.

Kombucha Fermentation of Olympus Mountain Tea (Sideritis scardica) Sweetened with Thyme Honey: Physicochemical Analysis and Evaluation of Functional Properties

This study implemented kombucha fermentation of Olympus Mountain tea (Sideritis scardica) sweetened with honey (OMTWH) in order to investigate the potential for producing a novel beverage with functional properties. The increase in the total count of bacteria and yeast suggests that the OMTWH acts as a viable substrate for supporting the proliferation of the microorganisms of the Kombucha symbiotic culture. The fermentation resulted in a reduction in pH and increased total titratable acidity. After fermentation, a statistically significant increase in the vitamins C, B1, B2, B6, B7, and B12 content was observed (p < 0.05). Total phenolics and antioxidant activity of the fermented beverage was significantly enhanced, as assessed by the method of Folin-Ciocalteu and ABTS assay, respectively. Results revealed that OMTWH had a potent inhibitory activity of α-amylase, α-glucosidase, acetylcholinesterase, and butyrylcholinesterase; OMTWH fermented with a kombucha consortium exhibited even higher inhibition. Hence, the process of kombucha fermentation can convert OMTWH into a novel beverage with enhanced functional properties.

Biocompatible Alginate Hydrogel Film Containing Acetic Acid Manifests Broad-Spectrum Antiviral and Anticancer Activities

Acetic acid, a colourless liquid organic acid with a characteristic acrid smell, is obtained naturally and has applications in both the food and pharmaceutical industries. It has been reported to have beneficial uses for lifestyle-related diseases, and its efficient disinfectant properties are well known. In this study, an alginate crosslinked with Ca2+ hydrogel film was treated with acetic acid to explore its biological properties for biomedicine. The results showed that the novel calcium alginate/acetic acid film was biocompatible in vitro using human keratinocyte cells and in vivo with Caenorhabditis elegans. It also had antiviral properties against enveloped and non-enveloped viruses and anticancer properties against melanoma and colon cancer cells. This novel film thus showed promise for the biomedical and pharmaceutical industries, with applications for fabricating broad-spectrum antiviral and anticancer materials.

Optimized Acetic Acid Production by Mixed Culture of Saccharomyces cerevisiae TISTR 5279 and Gluconobacter oxydans TBRC 4013 for Mangosteen Vinegar Fermentation Using Taguchi Design and Its Physicochemical Properties

This research investigates the enhancement of acetic acid production in the mangosteen vinegar fermentation process through mixed-culture fermentation involving S. cerevisiae TISTR 5279 and G. oxydans TBRC 4013, alongside an analysis of the resulting mangosteen vinegar's qualities and properties using Taguchi Experimental Design (TED). It focuses on key parameters, such as the juice concentration, inoculum ratio, and pasteurization conditions, to optimize acetic acid production. The findings highlight that the unpasteurized condition exerts the most significant influence on acetic acid production yield (p < 0.01), followed by the 3:1 inoculum ratio of S. cerevisiae TISTR 5279 to G. oxydans TBRC 4013 and a 10% mangosteen concentration. The achieved theoretical maximum yield of acetic acid on day 21 was 85.23 ± 0.30%, close to the predicted 85.33% (p > 0.05). Furthermore, the highest recorded acetic acid concentration reached 5.34 ± 0.92%. On day 14 of fermentation, the maximum productivity and yield were 3.81 ± 0.10 g/L/h and 0.54 ± 0.22 g/g, respectively. The resulting mangosteen vinegar exhibited elevated levels of total phenolic content (359.67 ± 47.26 mg GAE/100 mL), total flavonoid content (12.96 ± 0.65 mg CAE/100 mL), and anti-DPPH radical activity (17.67 ± 0.22%), suggesting potential health benefits. Beyond these chemical aspects, the mangosteen vinegar displayed distinct physical and chemical characteristics from the original mangosteen juice, possibly conferring additional health advantages. These findings are promising for industrial vinegar fermentation models and propose the potential use of the product as a valuable dietary supplement.

Volatile, Microbial, and Sensory Profiles and Consumer Acceptance of Coffee Cascara Kombuchas

Given the substantial world coffee production, tons of coffee fruit cascara rich in bioactive compounds are discarded annually. Using this by-product to produce potentially healthy and acceptable foods is a sustainable practice that aggregates value to coffee production and may help improve people's lives. This study aimed to elaborate kombuchas from coffee cascara tea, evaluate their microbial profile, and monitor the changes in the volatile profile during fermentation, together with sensory attributes and acceptance by consumers from Rio de Janeiro (n = 113). Arabica coffee cascaras from Brazil and Nicaragua were used to make infusions, to which black tea kombucha, a Symbiotic Culture of Bacteria and Yeasts (SCOBY), and sucrose were added. Fermentation of plain black tea kombucha was also monitored for comparison. The volatile profile was analyzed after 0, 3, 6, and 9 days of fermentation via headspace solid phase microextraction GC-MS. A total of 81 compounds were identified considering all beverages, 59 in coffee cascara kombuchas and 59 in the black tea kombucha, with 37 common compounds for both. An increase mainly in acids and esters occurred during fermentation. Despite the similarity to black tea kombucha, some aldehydes, esters, alcohols, and ketones in coffee cascara kombucha were not identified in black tea kombucha. Potential impact compounds in CC were linalool, decanal, nonanal, octanal, dodecanal, ethanol, 2-ethylhexanol, ethyl acetate, ethyl butyrate, ethyl acetate, β-damascenone, γ-nonalactone, linalool oxide, phenylethyl alcohol, geranyl acetone, phenylacetaldehyde, isoamyl alcohol, acetic acid, octanoic acid, isovaleric acid, ethyl isobutyrate, ethyl hexanoate, and limonene. The mean acceptance scores for cascara kombuchas varied between 5.7 ± 0.53 and 7.4 ± 0.53 on a nine-point hedonic scale, with coffee cascara from three-day Nicaragua kombucha showing the highest score, associated with sweetness and berry, honey, woody, and herbal aromas and flavors. The present results indicate that coffee cascara is a promising by-product for elaboration of fermented beverages, exhibiting exotic and singular fingerprinting that can be explored for applications in the food industry.

Starmerella lactis-condensi, a yeast that has adapted to the conditions in the oenological environment

The yeast Starmerella (Candida) lactis-condensi is considered a food contaminant microorganism. The aim of our research was to determine why St. lactis-condensi could become the dominant species of Essences, the top sweet wine speciality of Tokaj wine region in Hungary. We investigated the physiological properties of these yeasts based on parameters that may influence their ability to selectively proliferate and persist during maturation in wines with very high sugar content. These include glucose and fructose, alcohol, and sulphur tolerance. Our studies have shown that St. lactis-condensi is a fructophilic yeast that is able to adapt quickly to very high sugar concentrations (up to 500 g/L) in the Essences. The high glucose concentration inhibits its growth, as well as that of the St. bacillaris (Candida zemplinina) strains tested. The type and amount of sugars in the Essences, together with the sulphur and alcohol content, influence the composition of the dominant yeast biota. Analysis of (GTG)₅ microsatellite in the nuclear genome and mtDNA-RFLP studies demonstrate that a diverse population of St. lactis-condensi occurs in the Tokaj wine region, in the Essences. This yeast species is characterised by both physiological and genetic biodiversity. GC-MS analysis of Essences colonised exclusively with these yeasts showed no deterioration in quality.

Enhanced production of acetic acid through bioprocess optimization employing response surface methodology and artificial neural network

In this study, acetic acid bacteria (AAB) are isolated from fruit waste and cow dung on the basis of acetic acid production potential. The AAB were identified based on halo-zones produced in the Glucose-Yeast extract-Calcium carbonate (GYC media) agar plates. In the current study, maximum acetic acid yield is reported to be 4.88 g/100 ml from the bacterial strain isolated from apple waste. With the help of RSM (Response surface methodology) tool, glucose and ethanol concentration and incubation period, as independent variable showed the significant effect of glucose concentration and incubation period and their interaction on the AA yield. A hypothetical model of artificial neural network (ANN) was also used to compare the predicted value from RSM. Acetic acid production through the biological route can be the sustainable and clean approach to utilizing food waste in circular economy approach.

Characterization of Aroma Active Compound Production during Kombucha Fermentation: Towards the Control of Sensory Profiles

Since the sensorial profile is the cornerstone for the development of kombucha as a beverage with mass market appeal, advanced analytical tools are needed to gain a better understanding of the kinetics of aromatic compounds during the fermentation process to control the sensory profiles of the drink. The kinetics of volatile organic compounds (VOCs) was determined using stir bar sorptive extraction-gas chromatography-mass spectrometry, and odor-active compounds were considered to estimate consumer perception. A total of 87 VOCs were detected in kombucha during the fermentation stages. The synthesis of mainly phenethyl alcohol and isoamyl alcohol probably by Saccharomyces genus led to ester formation. Moreover, the terpene synthesis occurring at the beginning of fermentation (Δ-3-carene, α-phellandrene, γ-terpinene, m- and p-cymene) could be related to yeast activity as well. Principal component analysis identified classes that allowed the major variability explanation, which are carboxylic acids, alcohols, and terpenes. The aromatic analysis accounted for 17 aroma-active compounds. These changes in the evolution of VOCs led to flavor variations: from citrus-floral-sweet notes (geraniol and linalool domination), and fermentation brought intense citrus-herbal-lavender-bergamot notes (α-farnesene). Finally, sweet-floral-bready-honey notes dominated the kombucha flavor (2-phenylethanol). As this study allowed to estimate kombucha sensory profiles, an insight for the development of new drinks by controlling the fermentation process was suggested. Such a methodology should allow a better control and optimization of their sensory profile, which could in turn lead to greater consumer acceptance.

The Next Frontier of 3D Bioprinting: Bioactive Materials Functionalized by Bacteria

3D bioprinting has become a flexible technical means used in many fields. Currently, research on 3D bioprinting is mainly focused on the use of mammalian cells to print organ and tissue models, which has greatly promoted progress in the fields of tissue engineering, regenerative medicine, and pharmaceuticals. In recent years, bacterial bioprinting has gradually become a rapidly developing research fields, with a wide range of potential applications in basic research, biomedicine, bioremediation, and other field. Here, this works reviews new research on bacterial bioprinting, and discuss its future research direction.

Isolation of Carboxylic Acids and NaOH from Kraft Black Liquor with a Membrane-Based Process Sequence

In kraft pulping, large quantities of biomass degradation products dissolved in the black liquor are incinerated for power generation and chemical recovery. The black liquor is, however, a promising feedstock for carboxylic acids and lignin. Efficient fractionation of black liquor can be used to isolate these compounds and recycle the pulping chemicals. The present work discusses the fractionation of industrial black liquor by a sequence of nanofiltration and bipolar membrane electrodialysis units. Nanofiltration led to retention of the majority of lignin in the retentate and to a significant concentration increase in low-molecular-weight carboxylic acids, such as formic, acetic, glycolic and lactic acids, in the permeate. Subsequent treatment with bipolar membrane electrodialysis showed the potential for simultaneous recovery of acids in the acid compartment and the pulping chemical NaOH in the base compartment. The residual lignin was completely retained by the used membranes. Diffusion of acids to the base compartment and the low current density, however, limited the yield of acids and the current efficiency. In experiments with a black liquor model solution under optimized conditions, NaOH and acid recoveries of 68-72% were achieved.

Recent advances in bacteriophage-based therapeutics: Insight into the post-antibiotic era

Antibiotic resistance is one of the biggest threats to global health, as it can make the treatment of bacterial infections in humans difficult owing to their high incidence rate, mortality, and treatment costs. Bacteriophage, which constitutes a type of virus that can kill bacteria, is a promising alternative strategy against antibiotic-resistant bacterial infections. Although bacteriophage therapy was first used nearly a century ago, its development came to a standstill after introducing the antibiotics. Nowadays, with the rise in antibiotic resistance, bacteriophage therapy is in the spotlight again. As bacteriophage therapy is safe and has significant anti-bacterial activity, some specific types of bacteriophages (such as bacteriophage phiX174 and Pyo bacteriophage complex liquid) entered into phase III clinical trials. Herein, we review the key points of the antibiotic resistance crisis and illustrate the factors that support the renewal of bacteriophage applications. By summarizing recent state-of-the-art studies and clinical data on bacteriophage treatment, we introduced (i) the pharmacological mechanisms and advantages of antibacterial bacteriophages, (ii) bacteriophage preparations with clinical potential and bacteriophage-derived anti-bacterial treatment strategies, and (iii) bacteriophage therapeutics aimed at multiple infection types and infection-induced cancer treatments. Finally, we highlighted the challenges and critical perspectives of bacteriophage therapy for future clinical development.

Metabolic engineering using acetate as a promising building block for the production of bio-based chemicals

The production of biofuels and biochemicals derived from microbial fermentation has received a lot of attention and interest in light of concerns about the depletion of fossil fuel resources and climatic degeneration. However, the economic viability of feedstocks for biological conversion remains a barrier, urging researchers to develop renewable and sustainable low-cost carbon sources for future bioindustries. Owing to the numerous advantages, acetate has been regarded as a promising feedstock targeting the production of acetyl-CoA-derived chemicals. This review aims to highlight the potential of acetate as a building block in industrial biotechnology for the production of bio-based chemicals with metabolic engineering. Different alternative approaches and routes comprised of lignocellulosic biomass, waste streams, and C1 gas for acetate generation are briefly described and evaluated. Then, a thorough explanation of the metabolic pathway for biotechnological acetate conversion, cellular transport, and toxin tolerance is described. Particularly, current developments in metabolic engineering of the manufacture of biochemicals from acetate are summarized in detail, with various microbial cell factories and strategies proposed to improve acetate assimilation and enhance product formation. Challenges and future development for acetate generation and assimilation as well as chemicals production from acetate is eventually shown. This review provides an overview of the current status of acetate utilization and proves the great potential of acetate with metabolic engineering in industrial biotechnology.

Kombucha: Production and Microbiological Research

Kombucha is a sparkling sugared tea commonly prepared using a sugared tea infusion and fermented at ambient temperature for several days using a cellulose pellicle also called tea fungus that is comprised of acetic acid bacteria and yeast. Consumption of Kombucha has been reported as early as 220 B.C. with various reported potential health benefits and appealing sensory properties. During Kombucha fermentation, sucrose is hydrolysed by yeast cells into fructose and glucose, which are then metabolised to ethanol. The ethanol is then oxidised by acetic acid bacteria (AAB) to produce acetic acid which is responsible for the reduction of the pH and also contributes to the sour taste of Kombucha. Characterisation of the AAB and yeast in the Kombucha starter culture can provide a better understanding of the fermentation process. This knowledge can potentially aid in the production of higher quality products as these microorganisms affect the production of metabolites such as organic acids which are associated with potential health benefits, as well as sensory properties. This review presents recent advances in the isolation, enumeration, biochemical characteristics, conventional phenotypic identification system, and modern genetic identification techniques of AAB and yeast present in Kombucha to gain a better understanding of the microbial diversity of the beverage.

Study of Consumer Liking of Six Chinese Vinegar Products and the Correlation between These Likings and the Volatile Profile

As the aroma of Chinese vinegar is a key quality trait that influences consumer liking, a combination of sensory data and instrumental measurements were performed to help understand the aroma differences of six types of Chinese vinegar. A total of 52 volatile compounds, mostly ethyl acetate, acetic acid, and phenethyl alcohol, were detected in six types of Chinese vinegar using solid-phase microextraction coupled with gas chromatography–mass spectrometry (SPME-GC–MS). Combined with open-ended questions, the correlation between consumer liking and the volatile profile of the vinegar was further investigated. More consumers preferred the potato vinegar (B6) described as “having a sweet aroma and fruity vinegar aroma”. The Heng-shun Jinyou balsamic vinegar (B5) was not favored by consumers with its exhibition of “too pungent vinegar aroma”. Based on their preference patterns, consumers were grouped into three clusters by k-means clustering and principal component analysis (PCA). Using partial least squares regression (PLSR), the most important volatile compounds that drove consumer liking in the three clusters were obtained, among which 14 compounds such as 1-methylpyrrole-2-carboxaldehyde, ethyl acetate, and acetylfuran had the greatest impact on consumer liking, which could guide manufacturers to improve product quality and customer satisfaction.

Evaluation of Bioactive Compounds and Antioxidative Activity of Fermented Green Tea Produced via One- and Two-Step Fermentation

This study investigated the influence of one- and two-step fermentation on bioactive compound production in fermented green tea, i.e., one-step fermented green tea (OFG) and two-step fermented green tea (TFG). One-step fermentation entailed acetic acid fermentation, while two-step fermentation consisted of lactic acid fermentation followed by acetic acid fermentation. Acetobacter pasteurianus PCH 325, isolated from an over-ripened peach, was selected for acetic acid fermentation based on its growth and organic acid production characteristics. Acetic acid fermentation conditions were optimized for one- and two-step fermentation: 3% fermentation alcohol for both processes; 8% and 4% sucrose, respectively; and fermentation at 25 °C for both processes. For lactic acid fermentation of TFG, the inoculum and optimized conditions reported previously were used. Under the optimized conditions, the acetic acid content in OFG and TFG increased 21.20- and 29.51-fold, respectively. Furthermore, through two-step fermentation, γ-aminobutyric acid and lactic acid were produced up to 31.49 ± 1.17 mg/L and 243.44 ± 58.15 mg/L, respectively, which together with acetic acid could contribute to the higher DPPH scavenging activity of TFG. This study suggests that two-step fermentation may be a valuable strategy in industry for raising the amount of acetic acid and/or providing additional bioactive compounds.

Selection of Acetic Acid Bacterial Strains and Vinegar Production From Local Maltese Food Sources

This study investigates the isolation, identification, and fermentation performance of autochthonous acetic acid bacteria (AAB) from local niche habitats on the Island of Gozo (Malta) and their further use for vinegar production, employing local raw materials. The bacteria were isolated from grapevine berries and vinegar produced in the cottage industry. Following phenotype and genotype identification, the AAB were ascribed to the genera Acetobacter, Gluconobacter, and Komagataeibacter. A mixture of selected AAB was tested as an inoculum for vinegar production in bench fermenters, under different conditions and substrates, namely, grapes, honey, figs, onions, prickly pear, and tomatoes. The bench fermenters were operated under semi-continuous fermentation where working volumes were maintained by discharging and subsequent recharging accordingly to maintain the acidity in fermenters by adding 30-50 g/l of acetic acid for optimal Acetobacteraceae performance. Finally, the vinegar products obtained from the different substrates were evaluated for their quality, including organoleptic properties, which showed the superior quality of wood-treated vinegar samples with respect to neat vinegar samples.

The Novel Strain of Gluconobacter oxydans H32 Isolated from Kombucha as a Proposition of a Starter Culture for Sour Ale Craft Beer Production

Acetic acid bacteria (AAB) has found applications in food technology, including beverages and vinegar. Generally, AAB shows several beneficial properties and has technological usefulness. Properly selected and tested strains of this group of bacteria may constitute a new and interesting solution among starter cultures for functional food. Therefore, the study aimed to develop a sour beer technology, based on the novel strain Gluconobacter oxydans H32. The microbiological, physical-chemical (HPLC method), and sensory (QDP method) quality were determined during 6 months of storage of dark and light beer samples. The AAB count at the beginning of storage was approximately 8 log CFU mL−1, and 6 log CFU mL−1 after 6 months of storage. As a result of the metabolic activity, acetic acid, gluconic acid, and ascorbic acid were detected in the samples. The light beer had a significantly better sensory quality, especially sample BPGL with the addition of G. oxydans H32 starter culture. It was found that it is possible to develop a functional beer with the novel strain Gluconobacter oxydans H32. These Sour Ale craft beers were not only a good source of H32 strain but also its pro-health metabolites.

Bacterial Diversity, Organic Acid, and Flavor Analysis of Dacha and Ercha Fermented Grains of Fen Flavor Baijiu

Fen flavor Baijiu needs two rounds of fermentation, which will obtain Dacha after initial fermentation and Ercha after secondary fermentation. The quality of Baijiu is closely related to the microbes within fermented grains. However, the bacterial diversity in Dacha and Ercha fermented grains of Fen flavor Baijiu has not been reported. In the present study, the structure and diversity of bacteria communities within fermented grains of Fen flavor Baijiu were analyzed and evaluated using MiSeq platform's HTS with a sequencing target of the V3-V4 region of the 16S rRNA gene. Through the analysis of physical and chemical indexes and electronic senses, the relationship between bacterial flora, organic acid, taste, and aroma in fermented grains was clarified. The results indicated that Lactobacillus was the main bacteria in Dacha, and the mean relative content was 97.53%. The bacteria within Ercha samples were Pseudomonas and Bacillus, mean relative content was 37.16 and 28.02%, respectively. The diversity of bacterial communities in Ercha samples was significantly greater than that in Dacha samples. The correlation between Lactobacillus and organic acids, especially lactic acid, led to the difference between Dacha and Ercha organic acids, which also made the pH value of Dacha lower and the sour taste significantly higher than Ercha. Lactobacillus was significantly positively correlated with a variety of aromas, which made Dacha the response value of aromas higher. In addition, Bacillus had a significant positive correlation with bitterness and aromatic compounds, which led to a higher response value of bitterness in Ercha and made it present an aromatic aroma. This study provides an in-depth analysis of the difference between different stages of Fen flavor Baijiu, and theoretical support for the standard production and improvement in quality of Fen flavor Baijiu in the future.

A Glimpse of the World of Volatile Fatty Acids Production and Application: A review

Sustainable provision of chemicals and materials is undoubtedly a defining factor in guaranteeing economic, environmental, and social stability of future societies. Among the most sought-after chemical building blocks are volatile fatty acids (VFAs). VFAs such as acetic, propionic, and butyric acids have numerous industrial applications supporting from food and pharmaceuticals industries to wastewater treatment. The fact that VFAs can be produced synthetically from petrochemical derivatives and also through biological routes, for example, anaerobic digestion of organic mixed waste highlights their provision flexibility and sustainability. In this regard, this review presents a detailed overview of the applications associated with petrochemically and biologically generated VFAs, individually or in mixture, in industrial and laboratory scale, conventional and novel applications.

Two-Stage Polyhydroxyalkanoates (PHA) Production from Cheese Whey Using Acetobacter pasteurianus C1 and Bacillus sp. CYR1

Cheese whey (CW) can be an excellent carbon source for polyhydroxyalkanoates (PHA)-producing bacteria. Most studies have used CW, which contains high amounts of lactose, however, there are no reports using raw CW, which has a relatively low amount of lactose. Therefore, in the present study, PHA production was evaluated in a two-stage process using the CW that contains low amounts of lactose. In first stage, the carbon source existing in CW was converted into acetic acid using the bacteria, Acetobacter pasteurianus C1, which was isolated from food waste. In the second stage, acetic acid produced in the first stage was converted into PHA using the bacteria, Bacillus sp. CYR-1. Under the condition of without the pretreatment of CW, acetic acid produced from CW was diluted at different folds and used for the production of PHA. Strain CYR-1 incubated with 10-fold diluted CW containing 5.7 g/L of acetic acid showed the higher PHA production (240.6 mg/L), whereas strain CYR-1 incubated with four-fold diluted CW containing 12.3 g/L of acetic acid showed 126 mg/L of PHA. After removing the excess protein present in CW, PHA production was further enhanced by 3.26 times (411 mg/L) at a four-fold dilution containing 11.3 g/L of acetic acid. Based on Fourier transform infrared spectroscopy (FT-IR), and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, it was confirmed that the PHA produced from the two-stage process is poly-β-hydroxybutyrate (PHB). All bands appearing in the FT-IR spectrum and the chemical shifts of NMR nearly matched with those of standard PHB. Based on these studies, we concluded that a two-stage process using Acetobacter pasteurianus C1 and Bacillus sp. CYR-1 would be applicable for the production of PHB using CW containing a low amount of lactose.

Effect of processing and storage on the volatile profile of sugarcane honey: A four-year study

Sugarcane honey (SCH) is a syrup from Madeira Island recognized by its unique and excellent aroma, associated to volatile organic compounds (VOCs) generated during the well-defined five stages of its traditional making process. The establishment of volatile profile throughout all SCH-making stages during four years, allowed the evaluation of the influence of each stage in the typical characterisitcs of SCH. One hundred eighthy seven VOCs were identified, being associated to several origins and formation pathways. VOCs formed during stage 1 and 2 were originate from raw material, and its oxidation (i.e. enzymatic browning) and thermal degradation (i.e. lipid oxidation, Maillard reactions, Strecker degradation). In stage 3 and 4, the caramelization and melanoidin degradation also occurred, while in stage 5, the thermal degradation continues, followed by microbial activity. Chemometric analysis allowed to identify 35 VOCs as potential markers for processing control by the producers and as guarantee of the typicality and authenticity of SCH. Based on the obtained results, we propose for the first time an innovative schematic diagram explaining the potential reactions and pathways for VOCs formation during the different steps of the SCH production.

Chemical Differentiation of Sugarcane Cultivars Based on Volatile Profile and Chemometric Analysis

Sugarcane (SC) is a perennial grass widely cultivated in tropical and subtropical regions. However, its cultivation in Europe is residual, where Madeira Island, Portugal, is the only region where SC continues to be extensively cultivated. For the first time, the volatile profiles of regional cultivars were established by solid-phase microextraction combined with gas chromatography-mass spectrometry. Different volatile profiles for each cultivar were recognized, identifying 260 volatile organic compounds belonging to 15 chemical classes, such as aldehydes, alcohols, ketones, hydrocarbons, esters, and terpenes. Chemometric analysis procedure, namely, one-way ANOVA with Tukey's test, principal component analysis, partial least-square analysis, linear discriminant analysis, and hierarchical clustering analysis, allowed the differentiation between all regional cultivars. This study represents an important contribution for the maintenance of biodiversity and subsistence of the SC industry in Europe. Furthermore, it is also a valuable contribution to establish the typicality of traditional SC-based products, such as SC honey.

Towards a Starter Culture for Cocoa Fermentation by the Selection of Acetic Acid Bacteria

Acetic acid bacteria are involved in many food and beverage fermentation processes. They play an important role in cocoa bean fermentation through their acetic acid production. They initiate the development of some of the flavor precursors that are necessary for the organoleptic quality of cocoa, and for the beans’ color. The development of starter cultures with local strains would enable the preservation of the microbial biodiversity of each country in cocoa-producing areas, and would also control the fermentation. This approach could avoid the standardization of cocoa bean fermentation in the producing countries. One hundred and thirty acetic acid bacteria were isolated from three different cocoa-producing countries, and were identified based on their 16S rRNA gene sequence. The predominate strains were grown in a cocoa pulp simulation medium (CPSM-AAB) in order to compare their physiological traits regarding their specific growth rate, ethanol and lactic acid consumption, acetic acid production, and relative preferences of carbon sources. Finally, the intraspecific diversity of the strains was then assessed through the analysis of their genomic polymorphism by (GTG)5-PCR fingerprinting. Our results showed that Acetobacter pasteurianus was the most recovered species in all of the origins, with 86 isolates out of 130 cultures. A great similarity was observed between the strains according to their physiological characterization and genomic polymorphisms. However, the multi-parametric clustering results in the different groups highlighted some differences in their basic metabolism, such as their efficiency in converting carbon substrates to acetate, and their relative affinity to lactic acid and ethanol. The A. pasteurianus strains showed different behaviors regarding their ability to oxidize ethanol and lactic acid into acetic acid, and in their relative preference for each substrate. The impact of these behaviors on the cocoa quality should be investigated, and should be considered as a criterion for the selection of acetic acid bacteria starters.

[Atypical spoilage microorganisms in Argentinean yogurts: Gas-producing molds and bacteria of the genus Gluconobacter]

Microbial food alterations lead to unfit products for consumption, and their discarding, to significant economic losses for the food industry. During storage, fresh foods offer available niches for the survival and growth of undesirable microorganisms. In dairy products, data regarding spoilage and/or pathogenic bacteria is better documented than those for molds and yeasts. Dairy products are less susceptible to mold's contamination than products such as fruits and vegetables, due to their refrigerated storage; their elaboration from heat-treated milk and, for fermented ones, the dominant microbiota that acidifies the medium. However, even cheeses and yogurts may be susceptible to mold contamination. Atypical cases of yogurt samples containing spoilage microorganisms not previously reported (molds producing gas and bacteria of the genus Gluconobacter) in Argentinean fermented milks are presented here. For yogurt, in particular, the "classic" altering organisms were always being yeasts, and in other countries, molds belonging to the genus Aspergillus.

Classification of acetic acid bacteria and their acid resistant mechanism

Acetic acid bacteria (AAB) are obligate aerobic Gram-negative bacteria that are commonly used in vinegar fermentation because of their strong capacity for ethanol oxidation and acetic acid synthesis as well as their acid resistance. However, low biomass and low production rate due to acid stress are still major challenges that must be overcome in industrial processes. Although acid resistance in AAB is important to the production of high acidity vinegar, the acid resistance mechanisms of AAB have yet to be fully elucidated. In this study, we discuss the classification of AAB species and their metabolic processes and review potential acid resistance factors and acid resistance mechanisms in various strains. In addition, we analyze the quorum sensing systems of Komagataeibacter and Gluconacetobacter to provide new ideas for investigation of acid resistance mechanisms in AAB in the form of signaling pathways. The results presented herein will serve as an important reference for selective breeding of high acid resistance AAB and optimization of acetic acid fermentation processes.

Analysis of Difference in Microbial Community and Physicochemical Indices Between Surface and Central Parts of Chinese Special-Flavor Baijiu Daqu

Special-flavor Baijiu is a unique Baijiu in Jiangxi Province, China, whose uniqueness mainly depends on the unique production process of special-flavor Baijiu Daqu. However, the microbial structure and physicochemical indices of different parts of the special-flavor Baijiu Daqu are still unknown. This greatly reduces the actual value of Daqu in the production of special-flavor Baijiu. Therefore, culture-dependent and Illumina MiSeq sequencing methods were used to analyze the microbial structure of special-flavor Baijiu Daqu. The results indicated that there was a complicated microbial diversity in Chinese special-flavor Baijiu Daqu. The predominant bacterial communities were Bacillales, Lactobacillales, and Rhodospirillales, while Saccharomycetales and Eurotiales were the predominant fungal communities. Significant differences in microbial community and distribution were shown between the surface and central parts of Daqu. Acetobacter and Pichia genera were the predominant microorganisms in the surface part of Daqu, whereas Aspergillus, Kroppenstedtia, Oceanobacillus, and Bacillus genera were the predominant microorganisms in the central part of Daqu. Meantime, the different microbial distributions between the surface and central parts of Daqu caused the significant differences in the physicochemical indices. These results can provide an important theoretical basis for improving the brewing process and the quality of special-flavor Baijiu.

Pilot study on urban sewage treatment with micro pressure swirl reactor

This study aimed to propose a new type of micro-pressure swirl reactor (MPSR) to treat urban sewage. The MPSR could form a stable swirl in the reactor, and realized the coexistence of anaerobic, anoxic, and aerobic zones in a single aeration tank. The pilot study showed that MPSR achieved high removal efficient of SS, COD, NH₄⁺-N, TN, TP under the conditions of drastic fluctuation in influent quality and temperature, and the average removal rate were 88.58%, 93.32%, 94.47%, 73.19%, 96.16%. The relative high abundance of Thermomonas, Thaurea, and Dechloromonas, etc, guaranteed the denitrification efficiency of the MPSR, and Dechloromonas was the main phosphorus removal bacteria in the system. The study confirmed the rationality of the structural design of the MPSR, and it was excellent in sewage treatment and stability.

Fermentative Foods: Microbiology, Biochemistry, Potential Human Health Benefits and Public Health Issues

Fermented foods identify cultures and civilizations. History, climate and the particulars of local production of raw materials have urged humanity to exploit various pathways of fermentation to produce a wide variety of traditional edible products which represent adaptations to specific conditions. Nowadays, industrial-scale production has flooded the markets with ferments. According to recent estimates, the current size of the global market of fermented foods is in the vicinity of USD 30 billion, with increasing trends. Modern challenges include tailor-made fermented foods for people with special dietary needs, such as patients suffering from Crohn's disease or other ailments. Another major challenge concerns the safety of artisan fermented products, an issue that could be tackled with the aid of molecular biology and concerns not only the presence of pathogens but also the foodborne microbial resistance. The basis of all these is, of course, the microbiome, an aggregation of different species of bacteria and yeasts that thrives on the carbohydrates of the raw materials. In this review, the microbiology of fermented foods is discussed with a special reference to groups of products and to specific products indicative of the diversity that a fermentation process can take. Their impact is also discussed with emphasis on health and oral health status. From Hippocrates until modern approaches to disease therapy, diet was thought to be of the most important factors for health stability of the human natural microbiome. After all, to quote Pasteur, "Gentlemen, the microbes will have the last word for human health." In that sense, it is the microbiomes of fermented foods that will acquire a leading role in future nutrition and therapeutics.

Oriented Fermentation of Food Waste towards High-Value Products: A Review

Food waste has a great potential for resource recovery due to its huge yield and high organic content. Oriented fermentation is a promising method with strong application prospects due to high efficiency, strong robustness, and high-value products. Different fermentation types lead to different products, which can be shifted by adjusting fermentation conditions such as inoculum, pH, oxidation-reduction potential (ORP), organic loading rate (OLR), and nutrients. Compared with other types, lactic acid fermentation has the lowest reliance on artificial intervention. Lactic acid and volatile fatty acids are the common products, and high yield and high purity are the main targets of food waste fermentation. In addition to operational parameters, reactors and processes should be paid more attention to for industrial application. Currently, continuously stirred tank reactors and one-stage processes are used principally for scale-up continuous fermentation of food waste. Electro-fermentation and iron-based or carbon-based additives can improve food waste fermentation, but their mechanisms and application need further investigation. After fermentation, the recovery of target products is a key problem due to the lack of green and economic methods. Precipitation, distillation, extraction, adsorption, and membrane separation can be considered, but the recovery step is still the most expensive in the entire treatment chain. It is expected to develop more efficient fermentation processes and recovery strategies based on food waste composition and market demand.

Pyrosequencing scrutiny of bacterial and fungal communities in two Sudanese sorghum-based fermented foods

Purpose

Several fermented foods are produced from sorghum flour in Africa, especially in the dryland regions where it is the principal crop. It is important to explore the microbial communities in these foods to improve their quality and organoleptic properties. In this study, the bacterial and fungal communities of two popular sorghum-based fermented foods in Sudan (kisra and hulumur) were analyzed, for the first time, using a culture-independent method of next-generation sequencing.

Methods

Fermented doughs for kisra and hulumur production were prepared according to the traditional approach, and then the bacterial and fungal communities were investigated using high-throughput sequencing.

Results

Firmicutes and Proteobacteria phyla were the predominant bacteria in both fermented doughs. At the genus level, the bacterial community was dominated by lactic acid bacteria, primarily Lactobacillus and Pediococcus, which represented 95.7% and 72% of the bacterial population in kisra and hulumur, respectively. Next, acetic acid bacteria (Gluconobacter and Acetobacter) were subdominant in hulumur. The fungal community was more heterogeneous among the fermented doughs. Zygomycota (85.5%) comprised the major phylum in kisra fermented dough, whereas Ascomycota (99.5%) was predominant in hulumur. The major fungal genera, Rhizopus, Alternaria, Penicillium, Gibberella, Lasiodiplodia, and Aspergillus, were extremely varied between the fermented doughs.

Conclusion

Exploration of kisra and hulumur microbial community structure will expand the knowledge about their microbiota to manipulate the microbial community and improve their quality and organoleptic properties using different microbial recipes.

Screening and molecular characterization of new thermo- and ethanol-tolerant Acetobacter malorum strains isolated from two biomes Moroccan cactus fruits

Industrially, the sensitivity of acetic acid bacteria (AAB) to the high temperatures and the high ethanol concentrations is the major concerns for manufacturers. This study was conceived and designed to isolate and identify new thermo- and ethanol-tolerant AAB from Opuntia ficus-indica L. fruits. As a result, among 140 isolated bacterial strains, five selected strains (CR1, CR5, CR23, CZ2, and CZ15) exhibited important acetic acid production until 40 °C. The use of 16S rDNA gene analysis was insufficient to identify selected bacteria. Indeed, except CR5 that presented 100% similarity to A. cerevisiae, the other strains presented similar homology rates simultaneously to the 16S rDNA sequences of A. cerevisiae and A. malorum. The reidentification by 16S-23S rDNA gene sequencing showed that CR1, CR23, and CZ15 were A. malorum, which were shown tolerance to the highest concentration of ethanol (12%) and produced elevated amount (40 g/L) of acetic acid at 37 °C. In summary, we showed the thermotolerance and ethanol tolerant character of new A. malorum strains, which can be used as a starter for vinegar production. Furthermore, during the molecular characterization of the isolated strains, we concluded that 16S-23S rDNA internal transcribed spacer sequence is of great importance for discriminating between AAB species as a complement to the identification by 16S rDNA sequencing.

Selective adsorption and recovery of volatile fatty acids from fermented landfill leachate by activated carbon process

An adsorption-desorption process was applied on fermented landfill leachate to adsorb and recover acetic and butyric acid, using activated carbon. In this study, the first, volatile fatty acids adsorption process from fermented leachate was optimized, by investigating various affecting factors such as pH, time, agitation speed, activated carbon dosage, and temperature. The optimum condition for maximum adsorption of 88.94% acetic acid and 98.53% butyric acid, was 19.79 %wt activated carbon dosage, 40.00 rpm of agitation speed, in 9.45 °C and contact time of 179.89 h, while the pH of the substrate was kept fixed at pH:3.0. Results of X-ray fluorescence (XRF) spectrometry, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and zeta potential revealed that carbon is the dominant component in the adsorbent with a significant effect to remove organic impurities, and it was observed that the activated carbon after the adsorption process showed an amorphous structure peak with a large internal surface area and pore volume. The results exposed that the adsorption on the surface of activated carbon was due to the chemisorption, and the chemisorption mechanism was supported by covalent bonding. The kinetic study displayed excellent fit to Pseudo-second order kinetics model. The second phase of this study was to recover the adsorbed VFAs using multistage desorption unit, in which application of deionized water and ethanol (as desorption agents) resulted in 89.1% of acetic acid and 67.8% of the butyric acid recovery.