Photodynamic inactivation of Salmonella enterica Enteritidis by 405 ± 5-nm light-emitting diode and its application to control salmonellosis on cooked chicken

Thymoquinone as a potent antimicrobial agent against Yersinia enterocolitica: Mechanisms of action and potential food safety applications

Yersinia enterocolitica (Y. enterocolitica) is a Gram-negative foodborne pathogen associated with potentially fatal diseases. Herein, the antibacterial activity and possible mechanism of thymoquinone (TQ) against Y. enterocolitica were explored. The minimum inhibitory concentration and the minimum bactericidal concentration of TQ against Y. enterocolitica were determined to be 0.10 and 0.20 mg/mL, respectively. Treatment with TQ increased the lag phase period and reduced the growth rate of Y. enterocolitica. TQ was also effective in preventing Y. enterocolitica contamination of pork. Treatment of Y. enterocolitica with TQ caused a decrease in intracellular ATP, membrane depolarization and an increase in the level of intracellular reactive oxygen species. In addition, TQ caused damage to DNA, a reduction in protein content, loss of membrane integrity and abnormal cell morphology. These findings suggest that TQ exhibits antimicrobial activity against Y. enterocolitica and may be a suitable compound to reduce Y. enterocolitica growth in food.

Synergistic antibacterial effect of 405 nm blue light-emitting diodes (LEDs) and gelatin film for inactivation of Escherichia coli O157:H7 and Salmonella Typhimurium on stainless steel and fresh fruit peel

A combined antibacterial effect of 405 nm blue LEDs (BL) and gelatin film (G) was investigated on stainless steel (SUS) and fresh fruit peel for the inactivation of Escherichia coli O157:H7 and Salmonella Typhimurium. On the SUS, the sum of the individual treatments of G for 20 min and BL at 20 J/cm2 was <1 log reduction (log CFU/cm2). In comparison, combination treatment of G and BL (G + BL) at 20 J/cm2 exhibited 2.37 and 3.09 log reduction on E. coli O157:H7 and S. Typhimurium. The G + BL treatment only increased a propidium iodide (PI) uptake, indicating that cell membrane damage occurred. In the G + BL treatment, reactive oxygen species (ROS) scavenging assay confirmed that ROS involved in the bactericidal mechanism. On orange peel, the G + BL treatment at 40 J/cm2 resulted in a 3.05 and 3.17 log reduction on E. coli O157:H7 and S. Typhimurium. In contrast, the individual treatment of G for 40 min led to reductions of 0.63 log CFU/cm2 for E. coli O157:H7 and 0.50 log CFU/cm2 for S. Typhimurium, while the BL treatment at 40 J/cm2 achieved reductions of 0.78 and 0.69 log CFU/cm2, respectively. A synergistic bactericidal effect was similarly observed in the combined treatment groups for both apple and grapefruit peels. In a color and texture analysis, G did not affect hardness, toughness, and visual color of fruit.

LED induced non-thermal preservation of muscle foods: A systematic review

LED technology has emerged as a promising non-thermal preservation method for highly perishable muscle foods like meat and fish. Muscle foods are most susceptible to spoilage due to their high moisture content and nutrient density, which create an ideal environment for microbial growth, chemical oxidation, and enzymatic activity, which negatively alter their quality. LED treatment offers an effective solution by significantly reducing microbial loads and extending shelf life without adversely affecting sensory and nutritional properties. Specific wavelengths of LED light induce microbial inactivation through mechanisms like DNA damage, lipid oxidation, and protein alteration. Studies have shown that LED treatment can preserve the fresh-like quality of muscle foods by mitigating common spoilage processes. The advantages of LED technology include its non-thermal nature, ability to integrate with other preservation methods, and controllability in terms of intensity and wavelength. This enables for tailored applications based on food type and spoilage risks. As consumer demand grows for safe, chemical-free food options, LED technology addresses this need while enhancing food safety and quality. Further research is encouraged to optimize LED applications in various muscle food preservation contexts. With its exceptional ability to produce DNA damage in bacteria, inactivate enzymes, and malfunction biological activities, LED could serve as an inexpensive processing intervention to safeguard the quality of meat and seafood products. This review underscores the potential of LED technology as a promising alternative to traditional preservation methods for decontamination of muscle food.

Storage Properties and Shelf-Life Prediction of Fresh-Cut Radishes Treated by Photodynamic Technology

Fresh-cut radishes are susceptible to quality loss and microbial contamination during storage, resulting in a short shelf life. This study investigated the effects of photodynamic technology (PDT) on fresh-cut radishes stored at 4 °C for 10 d and developed appropriate models to predict the shelf life. Results showed that curcumin-mediated PDT maintained sensory acceptability, color, and firmness, decreased weight loss, and increased ascorbic acid and total phenolics of samples by inactivating polyphenol oxidase and peroxidase, resulting in improved antioxidant capacity and quality. The total bacteria count in samples was significantly (p < 0.05) reduced by 2.01 log CFU g-1 after PDT and their shelf life was extended by 6 d compared to the control. To accurately predict the shelf life, the kinetic models based on microbial growth were established, while weight loss, b* value, firmness, and ascorbic acid were selected as representative attributes for developing quality-based prediction models through correlation analysis. Modeling results showed prediction models based on ascorbic acid best fitted PDT-treated samples, while the modified Gompertz model based on bacteria growth was the best for control and samples treated by sodium hypochlorite. This study suggests that PDT is promising in extending the shelf life of fresh-cut radishes, and using critical indexes to establish the prediction model can provide a more reliable shelf-life estimation.

Salmonella spp. in poultry production-A review of the role of interventions along the production continuum

Salmonella is a significant pathogen of human and animal health and poultry are one of the most common sources linked with foodborne illness worldwide. Global production of poultry meat and products has increased significantly over the last decade or more as a result of consumer demand and the changing demographics of the world's population, where poultry meat forms a greater part of the diet. In addition, the relatively fast growth rate of birds which is significantly higher than other meat species also plays a role in how poultry production has intensified. In an effort to meet the greater demand for poultry meat and products, modern poultry production and processing practices have changed and practices to target control and reduction of foodborne pathogens such as Salmonella have been implemented. These strategies are implemented along the continuum from parent and grandparent flocks to breeders, the farm and finished broilers to transport and processing and finally from retail to the consumer. This review focuses on common practices, interventions and strategies that have potential impact for the control of Salmonella along the poultry production continuum from farm to plate.

Curcumin and carvacrol mediated photodynamic inactivation with 405 nm light emitting diodes (LEDs) on Salmonella Enteritidis

Photodynamic inactivation (PDI) has a potential application for food preservation that can minimize food pathogens posing risks to consumer health. This study aimed to evaluate the antibacterial activity of 405 nm light-emitting diodes (LEDs) illumination in the presence of carvacrol and curcumin against Salmonella Enteritidis and S. Enteritidis PT4 at different temperatures (4 °C, 25 °C and 37 °C) and time parameters (15 min, 30 min and 45 min) in the illumination system. Compared to their individual treatment, the decrease in the bacterial population was stronger in bacteria treated with LEDs + carvacrol or LEDs + curcumin. Co-application of carvacrol or curcumin with LEDs at 37 °C showed strong antibacterial activity against both bacteria depending on the application time. Co-application at 37 °C for 45 min completely inhibited the growth of S. Enteritidis. LEDs, curcumin, carvacrol applications alone or LEDs + curcumin, LEDs + carvacrol applications caused a decrease in bacterial population in proportion to the increase in the storage temperature and application times. These results showed that carvacrol or curcumin potentiates LEDs illumination therapy against both bacteria. Future studies on adapting the PDI system to control bacteria in a variety of foods may help develop novel strategies to fight against foodborne bacterial pathogens.

An Approach to Improve Energy Efficiency during Antimicrobial Blue Light Inactivation: Application of Pulse-Width Modulation Dimming to Balance Irradiance and Irradiation Time

Antimicrobial blue light (aBL) is an effective non-destructive inactivation technique and has received increasing attention. Despite its significance, the existing research has not thoroughly delved into the impacts of irradiance and irradiation time on enhancing energy efficiency during aBL inactivation and the explanation of the enhancement effect of pulse exposure. In this paper, a series of Escherichia coli inactivation experiments with different duty cycles, pulse frequencies, and irradiation times were conducted, and the relative concentrations of reactive oxygen species (ROS) were measured under corresponding conditions. A two-dimensional (2-D) Hom model was proposed to evaluate the effect of irradiance and irradiation time. The results show that, compared to continuous exposure, pulsed aBL (duty cycle = 25%) can save ~37% of the energy to achieve the same inactivation effect and generate a 1.95 times higher ROS concentration. The 2-D Hom model obtains the optimal combination of average irradiance and time according to the desired reduction and shows that the irradiation time has a higher weight than the irradiance (1.677 and 1.083, respectively). Therefore, using pulse exposure with a lower average irradiance for a longer period of time can achieve a better inactivation effect when consuming equivalent energy. The proposed pulse-width modulation dimming approach helps promote the application of the aBL technique.

New trends in the development of photodynamic inactivation against planktonic microorganisms and their biofilms in food system

The photodynamic inactivation (PDI) is a novel and effective nonthermal inactivation technology. This review provides a comprehensive overview on the bactericidal ability of endogenous photosensitizers (PSs)-mediated and exogenous PSs-mediated PDI against planktonic bacteria and their biofilms, as well as fungi. In general, the PDI exhibited a broad-spectrum ability in inactivating planktonic bacteria and fungi, but its potency was usually weakened in vivo and for eradicating biofilms. On this basis, new strategies have been proposed to strengthen the PDI potency in food system, mainly including the physical and chemical modification of PSs, the combination of PDI with multiple adjuvants, adjusting the working conditions of PDI, improving the targeting ability of PSs, and the emerging aggregation-induced emission luminogens (AIEgens). Meanwhile, the mechanisms of PDI on eradicating mono-/mixed-species biofilms and preserving foods were also summarized. Notably, the PDI-mediated antimicrobial packaging film was proposed and introduced. This review gives a new insight to develop the potent PDI system to combat microbial contamination and hazard in food industry.

Chitosan enhances antibacterial efficacy of 405 nm light-emitting diode illumination against Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella spp. on fresh-cut melon

This study aimed to evaluate the influence of chitosan on the antibacterial efficacy of 405 nm LED illumination against Escherichia coli O157:H7, Salmonella spp., and Listeria monocytogenes on fresh-cut melons. The antibacterial efficacy of LED illumination (a total dose of 1.3 kJ/cm²) with or without chitosan (0.5 and 1.0 %) against these three pathogens was determined at 4 and 10 °C, respectively. Non-illuminated and chitosan-treated fruits were stored in the dark for 36 h under the same temperature. Color changes, ascorbic acid content, and total flavonoid content of illuminated and non-illuminated fruits were also analyzed. The results showed that the populations of all three pathogens on the non-illuminated and chitosan-treated fruits remained unchanged during storage. Regardless of bacterial species and chitosan concentrations, LED illumination in combination with chitosan greatly reduced the bacterial populations by 1.5 - 3.5 log/cm², which was greater than LED illumination alone. Among the three pathogens, L. monocytogenes was the most susceptible to chitosan-mediated LED illumination. However, the whiteness index of illuminated fruits significantly increased by 1.3-fold compared to that of non-illuminated fruits, regardless of the presence of chitosan. Unlike color, no significant difference was observed in ascorbic acid and total flavonoid contents between illuminated and non-illuminated fruits. Although the fruit color was changed by LED illumination, these results indicate that adding chitosan could enhance the antibacterial efficacy of 405 nm LED illumination against major foodborne pathogens on fresh-cut melons without changing nutritional quality.

Dual-Stage Blue-Light-Guided Membrane and DNA-Targeted Photodynamic Inactivation Using Octyl Gallate for Ultraefficient Eradication of Planktonic Bacteria and Sessile Biofilms

This study aimed to investigate the synergistic bactericidal activity and mechanism of dual-stage light-guided membrane and DNA-targeted photodynamic inactivation (PDI) by the combination of blue light (BL, 420 nm) and the food additive octyl gallate (OG) against Vibrio parahaemolyticus in planktonic and biofilm growth modes. While OG serves as an outstanding exogenous photosensitizer, the planktonic cells were not visibly detectable after the OG-mediated PDI treatment with 0.2 mM OG within 15 min (191.7 J/cm²), and its biofilm was nearly eradicated within 60 min (383.4 J/cm²). Gram-positive Staphylococcus aureus was more susceptible to the PDI than Gram-negative V. parahaemolyticus. The cellular wall and proteins, as well as DNA, were the vulnerable targets for PDI. The membrane integrity could be initially disrupted by OG bearing a hydrophilic head and a hydrophobic tail via transmembrane insertion. The enhancement of OG uptake due to the first-stage light-assisted photochemical internalization (PCI) promoted the accumulation of OG in cells. It further boosted the second-stage light irradiation of the photosensitizer-inducing massive cell death. Upon the second-stage BL irradiation, reactive oxygen species (ROS) generated through the OG-mediated PDI in situ could extensively deconstruct membranes, proteins, and DNA, as well as biofilms, while OG could be activated by BL to carry out photochemical reactions involving the formation of OG-bacterial membrane protein (BMP) covalent conjugates and the interactions with DNA. This dual-stage light-guided subcellular dual-targeted PDI strategy exhibits encouraging effects on the eradication of planktonic bacteria and sessile biofilms, which provides a new insight into the development of an ultraeffective antimicrobial and biofilm removing/reducing technique to improve microbiological safety in the food industry.

Inactivation of Shigella flexneri by 405-nm Light-Emitting Diode Treatment and Possible Mechanism of Action

Shigella flexneri, a common Gram-negative foodborne pathogen, is widely distributed in fresh-cut fruits and vegetables, unpasteurized milk, and food processing environments. The aims of this study were to evaluate the antibacterial effects of 405-nm light-emitting diode (LED) treatment on S. flexneri and to investigate the possible mechanism. The results showed that LED irradiation (360 min) reduced the number of S. flexneri in phosphate-buffered saline by 3.29 log colony-forming unit (CFU)/mL (initial bacterial count: 6.81 log CFU/mL). The cells in reconstituted infant formula, cells on fresh-cut carrot slices, and biofilm-associated cells on stainless steel surfaces were reduced by 1.83 log CFU/mL, 7.00 log CFU/cm², and 4.35 log CFU/cm² following LED treatment for 360, 120, and 120 min, respectively. LED treatment damaged both DNA and cell wall of S. flexneri and changed cell morphology and cell membrane permeability. In addition, LED treatment decreased total cell protein concentration of S. flexneri. These results indicated that 405-nm LED treatment effectively controlled S. flexneri contamination of foods and food contact surfaces and that the bacterial inactivation may be the result of damage to multiple cellular components. These findings highlight the potential of LED technology in controlling S. flexneri during food processing, storage, and preparation.

A review on recent advances in LED-based non-thermal technique for food safety: current applications and future trends

Light-emitting diodes (LEDs) is an eco-friendly light source with broad-spectrum antimicrobial activity. Recent studies have extensively been conducted to evaluate its efficacy in microbiological safety and the potential as a preservation method to extend the shelf-life of foods. This review aims to present the latest update of recent studies on the basics (physical, biochemical and mechanical basics) and antimicrobial activity of LEDs, as well as its application in the food industry. The highlight will be focused on the effects of LEDs on different types (bacteria, yeast/molds, viruses) and forms (planktonic cells, biofilms, endospores, fungal toxin) of microorganisms. The antimicrobial activity of LEDs on various food matrices was also evaluated, together with further analysis on the food-related factors that lead to the differences in LEDs efficiency. Besides, the applications of LEDs on the food-related conditions, packaged food, and equipment that could enhance LEDs efficiency were discussed to explore the future trends of LEDs technology in the food industry. Overall, the present review provides important insights for future research and the application of LEDs in the food industry.

Blue Light for Inactivation of Meatborne Pathogens and Maintaining the Freshness of Beef

ABSTRACT

Beef is rich in various nutrients but easily spoils due to bacterial contamination; thus, a bactericidal method is needed to inactivate meatborne pathogens while maintaining the freshness of beef. The present study was conducted to investigate for the first time the bactericidal effect of blue light (BL) at 415 nm against four meatborne pathogens (methicillin-resistant Staphylococcus aureus, Escherichia coli, Salmonella Typhimurium, and Listeria monocytogenes) both in vitro and inoculated onto the surface of fresh beef. The populations of the four pathogens on the nonirradiated control beef did not change significantly (P > 0.05), whereas a dose-dependent inactivation effect was found for BL-treated beef both in vitro and in vivo. On the beef cuts, BL at 109.44 J/cm2 inactivated 90% of inoculated cells of the tested strains (P < 0.05), and this inactivation effect was sustained during 7 days of cold storage. Insignificant changes in lipid oxidation rate, water holding capacity, and cooking loss were found during storage between the control beef and the beef irradiated at 109.44 J/cm2 at the same time. BL had a minor and nonsignificant effect on surface color and free amino acid concentrations. The pH of the treated beef increased more slowly (P < 0.05) than did that of untreated beef. These results suggest that BL could be a novel bactericide and could help maintain the freshness of beef.

HIGHLIGHTS

Application of light emitting diodes (LEDs) for food preservation, post-harvest losses and production of bioactive compounds: a review

Light-emitting diode (LED) technology is a new non-thermal food preservation method that works by converting light energy into heat. LED has potential to revolutionize crop production, protection and preservation. This technology is economical and environmentally friendly. LEDs have been shown to improve the nutritive quality and shelf life of foods, control the ripening of fruits, induce the synthesis of bioactive compounds and antioxidants and reduce the microbial contamination. This technology also has great scope in countries, where safety, hygiene, storage and distribution of foods are serious issues. While comparing this technology with other lighting technologies, LEDs can bring numerous advantages to food supply chain from farm to fork. In case of small growing amenities which exploit only LEDs, energy expenditure has been successfully reduced while producing nutritious food. LEDs can be used to give us better understanding and control over production and preservation of food with relation to spectral composition of light. LEDs also play significant role in food safety by inactivating the food borne pathogens. Therefore, LED lighting is a very effective and promising technology for extending shelf life of agricultural produce by increasing disease resistance and with increased nutritional values.

Graphical abstract

Effects of 405 ± 5-nm LED Illumination on Environmental Stress Tolerance of Salmonella Typhimurium in Sliced Beef

Salmonella Typhimurium is a widely distributed foodborne pathogen and is tolerant of various environmental conditions. It can cause intestinal fever, gastroenteritis and bacteremia. The aim of this research was to explore the effect of illumination with 405 nm light-emitting diodes (LEDs) on the resistance of S. Typhimurium to environmental stress. Beef slices contaminated with S. Typhimurium were illuminated by 405 nm LEDs (18.9 ± 1.4 mW/cm²) for 8 h at 4 °C; controls were incubated in darkness at 7 °C. Then, the illuminated or non-illuminated (control) cells were exposed to thermal stress (50, 55, 60 or 65 °C); oxidative stress (0.01% H₂O₂ [v/v]); acid stress (simulated gastric fluid [SGF] at pH 2 or 3); or bile salts (1%, 2%, or 3% [w/v]). S. Typhimurium treated by 405 nm LED irradiation showed decreased resistance to thermal stress, osmotic pressure, oxidation, SGF and bile salts. The transcription of eight environmental tolerance-related genes were downregulated by the illumination. Our findings suggest the potential of applying 405 nm LED-illumination technology in the control of pathogens in food processing, production and storage, and in decreasing infection and disease related to S. Typhimurium.

Genetic Factors Affect the Survival and Behaviors of Selected Bacteria during Antimicrobial Blue Light Treatment

Antimicrobial resistance is a global, mounting and dynamic issue that poses an immediate threat to human, animal, and environmental health. Among the alternative antimicrobial treatments proposed to reduce the external use of antibiotics is electromagnetic radiation, such as blue light. The prevailing mechanistic model is that blue light can be absorbed by endogenous porphyrins within the bacterial cell, inducing the production of reactive oxygen species, which subsequently inflict oxidative damages upon different cellular components. Nevertheless, it is unclear whether other mechanisms are involved, particularly those that can affect the efficacy of antimicrobial blue light treatments. In this review, we summarize evidence of inherent factors that may confer protection to a selected group of bacteria against blue light-induced oxidative damages or modulate the physiological characteristics of the treated bacteria, such as virulence and motility. These include descriptions of three major photoreceptors in bacteria, chemoreceptors, SOS-dependent DNA repair and non-SOS protective mechanisms. Future directions are also provided to assist with research efforts to increase the efficacy of antimicrobial blue light and to minimize the development of blue light-tolerant phenotypes.

Comparison of measurement methods at determining the target sites injured by antimicrobials in Escherichia coli O157:H7 using metabolic inhibitors

Acquiring an understanding of the mechanisms underlying antimicrobial action is important for overcoming bacterial resistance to antimicrobials. This study evaluated three different methods (antimicrobial fixed broth dilution method, metabolic inhibitors fixed broth dilution method, and metabolic inhibitor fixed agar recovery method) for determining the target site of Escherichia coli O157:H7 by treatments with various antimicrobials (ethanol, ethylenediaminetetraacetic acid, polymyxin B, thymol, acetic acid, and citrus fruit extract). However, the results indicated only weak relationships between MIC values and mechanisms of antimicrobials known to cause damage or injury. In addition, the results of three measurement methods using metabolic inhibitors were not correlated. These results suggest that measurement methods using metabolic inhibitors alone may not be suitable for determining the target site injured by antimicrobials. Therefore, various measurement methods should be compared and analyzed to determine the damage or injury sites targeted by antimicrobials in pathogenic bacteria. Further studies are needed to compare and analyze the various measurement methods for determining the target site injured by antimicrobials in pathogenic bacteria.

Developing an LED preservation technology to minimize strawberry quality deterioration during distribution

This study investigated the effect of LED illumination on the inactivation of Rhizopus stolonifer and Botrytis cinerea on strawberries and physicochemical properties of the strawberries. Twelve days of illumination resulted in an antifungal effect of 3.4 and 1.9 log CFU/g on R. stolonifer and B. cinerea respectively. The illumination caused no significant effect (P ≥ 0.05) on the mass, color and texture of strawberries. Furthermore, total phenolic content, trolox equivalent antioxidant capacity and anthocyanin content of the illuminated strawberries significantly increased (P < 0.05). Vitamin C content of illuminated strawberries was only significantly different (P < 0.05) from the control starting from Day 9. These results show that 405 nm LED illumination can potentially complement temperature and humidity control in preventing mold spoilage and preserving physicochemical quality of strawberries during refrigerated storage.

Emerging trends in the photodynamic inactivation (PDI) applied to the food decontamination

The food and drink manufacturing industry is constantly seeking for alternative sanitation and disinfection systems that may achieve the same antimicrobial efficiency of conventional chemical sanitisers and at the same time be convenient in terms of energy and water savings. A candidate technology for this purpose is the use of light in combination with photosensitisers (PS) to generate a bioactive effect against microbial agents in a process defined as photodynamic inactivation (PDI). This technology can be applied to the food processing of different food matrices to reduce the microbial load of foodborne pathogens such as bacteria, fungi, viruses and protozoa. Also, the PDI can be exploited to increase the shelf-life period of food by inactivation of spoiling microbes. This review analyses new developments in the last five years for PDI systems applied to the food decontamination from foodborne pathogens. The photosensitisation mechanisms and methods are reported to introduce the applied technology against microbial targets in food matrices. Recent blue light emitting diodes (LED) lamp systems for the PDI mediated by endogenous PS are discussed as well PDI technologies with the use of exogenous PS from plant sources such as curcumin and porphyrin-based molecules. The updated overview of the most recent developments in the PDI technology both in wavelengths and employed PS will provide further points of analysis for the advancement of the research on new competitive and effective disinfection systems in the food industry.

Photodynamic inactivation of planktonic Staphylococcus aureus by sodium magnesium chlorophyllin and its effect on the storage quality of lettuce

Photodynamic inactivation (PDI) is a fast and effective non-heat sterilization technology. This study established an efficient blue light-emitting diode (LED) PDI with the photosensitizer sodium magnesium chlorophyllin (SMC) to eradicate Staphylococcus aureus in food. The antibacterial mechanisms were determined by evaluating DNA integrity, protein changes, morphological alteration, and the potency of PDI to eradicate S. aureus on lettuce was evaluated. Results showed that planktonic S. aureus could not be clearly observed on the medium after treatment with 5.0 μmol/L SMC for 10 min (1.14 J/cm2). Bacterial cell DNA and protein were susceptible to SMC-mediated PDI, and cell membranes were found to be disrupted. Moreover, SMC-mediated PDI effectively reduced 8.31 log CFU/mL of S. aureus on lettuce under 6.84 J/cm2 radiant exposure (30 min) with 100 μmol/L SMC, and PDI displayed a potent ability to restrain the weight loss as well as retard the changes of color difference of the lettuce during 7 day storage. The study will enrich our understanding of the inactivation of S. aureus by PDI, allowing for the development of improved strategies to eliminate bacteria in the food industry.

Antimicrobial activity of 405 nm light-emitting diode (LED) in the presence of riboflavin against Listeria monocytogenes on the surface of smoked salmon

This study investigated the antimicrobial activity of 405 nm light-emitting diode (LED) with and without riboflavin against Listeria monocytogenes in phosphate buffered saline (PBS) and on smoked salmon at different storage temperatures and evaluated its impact on food quality. The results show that riboflavin-mediated LED illumination in PBS 25 °C significantly inactivated L. monocytogenes cells by 6.2 log CFU/mL at 19.2 J/cm², while illumination alone reduced 1.9 log CFU/mL of L. monocytogenes populations at 57.6 J/cm². L. monocytogenes populations on illuminated smoked salmon decreased by 1.0-2.2 log CFU/cm² at 1.27-2.76 kJ/cm² at 4, 12, and 25 °C, regardless of the presence of riboflavin. Although illumination with and without riboflavin caused the lipid peroxidation and color change in smoked salmon, this study demonstrates the potential of a 405 nm LED to preserve the smoked salmon products, reducing the risk of listeriosis.

Effects of the curcumin-mediated photodynamic inactivation on the quality of cooked oysters with Vibrio parahaemolyticus during storage at different temperature

Photodynamic inactivation (PDI) is a promising method with multiple targets to inactivate bacteria on food using visible light. Inactivation potency of the curcumin-mediated blue light-emitting diode (LED) PDI against the pathogen Vibrio parahaemolyticus on cooked oysters and its effects on the storage quality were investigated by the microbiological, physical, chemical and histological methods during storage at 4 °C, 10 °C and 25 °C. Results showed that the PDI treatment obviously inhibited the recovery of V. parahaemolyticus on oysters during storage, and the maximal difference attained >1.0 Log₁₀ CFU/g (> 90%) compared to control stored at 10 °C and 25 °C. Meanwhile, it displayed a potent ability (p < 0.05) to restrain the decrease of pH values, reduce the production of total volatile basic nitrogen (TVB-N), suppress the lipids oxidation, as well as retard the changes of color difference of the oysters. In addition, the PDI effectively maintained the integrity and initial attachments of muscle fibers, and hence decreased the loss of water in myofibrillar space and the texture softening of oysters during storage. On this basis, this study facilitates the understanding of the potency of bacterial inactivation and food preservation of PDI, and hence pave the way for its application in food industry.

Antimicrobial Blue Light versus Pathogenic Bacteria: Mechanism, Application in the Food Industry, Hurdle Technologies and Potential Resistance

Blue light primarily exhibits antimicrobial activity through the activation of endogenous photosensitizers, which leads to the formation of reactive oxygen species that attack components of bacterial cells. Current data show that blue light is innocuous on the skin, but may inflict photo-damage to the eyes. Laboratory measurements indicate that antimicrobial blue light has minimal effects on the sensorial and nutritional properties of foods, although future research using human panels is required to ascertain these findings. Food properties also affect the efficacy of antimicrobial blue light, with attenuation or enhancement of the bactericidal activity observed in the presence of absorptive materials (for example, proteins on meats) or photosensitizers (for example, riboflavin in milk), respectively. Blue light can also be coupled with other treatments, such as polyphenols, essential oils and organic acids. While complete resistance to blue light has not been reported, isolated evidence suggests that bacterial tolerance to blue light may occur over time, especially through gene mutations, although at a slower rate than antibiotic resistance. Future studies can aim at characterizing the amount and type of intracellular photosensitizers across bacterial species and at assessing the oxygen-independent mechanism of blue light-for example, the inactivation of spoilage bacteria in vacuum-packed meats.

Applications of Light-Emitting Diodes (LEDs) in Food Processing and Water Treatment

Light-emitting diode (LED) technology is an emerging nonthermal food processing technique that utilizes light energy with wavelengths ranging from 200 to 780 nm. Inactivation of bacteria, viruses, and fungi in water by LED treatment has been studied extensively. LED technology has also shown antimicrobial efficacy in food systems. This review provides an overview of recent studies of LED decontamination of water and food. LEDs produce an antibacterial effect by photodynamic inactivation due to photosensitization of light absorbing compounds in the presence of oxygen and DNA damage; however, such inactivation is dependent on the wavelength of light energy used. Commercial applications of LED treatment include air ventilation systems in office spaces, curing, medical applications, water treatment, and algaculture. As low penetration depth and high-intensity usage can challenge optimal LED treatment, optimization studies are required to select the right light wavelength for the application and to standardize measurements of light energy dosage.

Effects of ultraviolet light and curcumin-mediated photodynamic inactivation on microbiological food safety: A study in meat and fruit

BACKGROUND

About one-third of the food produced in the world is lost or wasted every year. Contamination can cause significant food loss throughout the entire supply chain, including harvesting, processing, storage, and transport to consumers. This study evaluated ultraviolet-C (UV-C) light and curcumin-mediated photodynamic inactivation (PDI) for the decontamination of meat and fruit.

METHODS

The cut pieces of food samples contaminated with E. coli or S. aureus were submitted to photonic treatments. For UV-C, samples were irradiated with UV-C lamps (254 nm) for 0, 1, 2, 3, 4, 5 and 10 min. For PDI, samples were incubated using 40 and 80 μM curcumin and irradiated with 450 nm at 5, 10, and 15 J/cm² of light doses. The microbiological analysis was performed by counting the colony-forming unit (CFU).

RESULTS

UV-C irradiation reduced the number of E. coli in beef by (1.0 ± 0.2) log₁₀ CFU/mL after 5 min of exposure. In chicken and pork, the numbers of E. coli were reduced by (1.6 ± 0.7) log₁₀ CFU/mL and (1.6 ± 0.4) log₁₀ CFU/mL after 4 and 10 min of irradiation, respectively. In apple the reductions were (3.2 ± 0.4) and (3.8 ± 0.2) log₁₀ CFU/mL after 5 and 10 min of UV-C irradiation, respectively. PDI (40 μM, 15 J/cm²) reduced the number of S. aureus by (1.5 ± 0.2), (1.4 ± 0.2) and (0.6 ± 0.4) log₁₀ CFU/mL in beef, chicken, and pork meat samples, respectively. In apple the greatest reduction was (2.0 ± 0.4) log₁₀ CFU/mL using 80 μM and 10 J/cm².

CONCLUSION

UV-C irradiation and PDI had an anti-microbial effect in food and our findings indicated that the greatest effect was achieved in apples. Therefore, these techniques may be useful to reduce E. coli and S. aureus contamination levels on the surface of meats and fruits, being promising for applications in the field of microbiological food safety.

Inactivation of Escherichia Coli and Salmonella Using 365 and 395 nm High Intensity Pulsed Light Emitting Diodes

High intensity pulsed light emitting diode (LED) treatment is a novel approach to inactivate foodborne pathogens. The objective of this study was to evaluate the antibacterial potential of high intensity 365 (UV-A) and 395 nm (NUV-Vis) LED treatments against Escherichia coli and Salmonella enterica at high and low water activity (a_w) conditions, and to understand the influence of different process parameters on their antibacterial efficacy. Bacteria at high (in phosphate buffer saline, PBS) and low a_w (a_w = 0.75) conditions were treated with both the LEDs with specific doses at a fixed distance from the LEDs. The 365 nm LED showed more effectiveness in reducing the dried bacteria compared to 395 nm LED. The dry E. coli showed more resistance to LED treatments compared to Salmonella. The 365 and 395 nm LED treatments with ~658 J/cm² dose resulted in reductions of 0.79 and 1.76 log CFU/g of Salmonella, respectively, on 0.75 a_w pet foods. The LED treatments increased the surface temperature, resulting in water loss in the treated samples. This study showed that the dose, duration of light exposure, bacterial strain, and a_w played a major role in the antibacterial efficacy of the 365 and 395 nm LEDs.

Sono-photodynamic inactivation of Escherichia coli and Staphylococcus aureus in orange juice

Efficiency of blue (462 ± 3 nm) light emitting diode (LED) illumination to inactivate Escherichia coli and Staphylococcus aureus in the presence of exogenous photosensitizer (curcumin) was studied in freshly squeezed orange juice. Further, the combinational effect of ultrasound (US), photosensitizer (PS) and blue light (BL) on inactivation of microbes was evaluated. The effect of process parameters such as concentration of PS, US and volume of the juice on E. coli and S. aureus inactivation was also investigated. The US alone and PS + BL treatments resulted in 3.02 ± 0.52 and 1.06 ± 0.13 log reduction of E. coli; 0.18 ± 0.14 and 2.34 ± 0.13 log reduction of S. aureus, respectively. The combination of PS + US + BL treatment at optimized conditions resulted in 2.35 ± 0.16 log reduction of S. aureus. An additive effect on the inactivation of E. coli (4.26 ± 0.32 log reduction) was observed with PS + US + BL combination treatment. The US treatment showed significant change in cloud value, colour and browning index of orange juice. The combinational non-thermal processes (PS + BL and PS + US + BL) did not have any significant effect on total phenolic content, total flavonoid content, and hesperidin content of the orange juice. However, these processes affected ascorbic acid content and antioxidant activity negatively. Thus, this study indicated that photodynamic inactivation of E. coli and S. aureus using LED-based photosensitization in fruit juices could be a potential method for microbial inactivation. Nevertheless, the effect on quality parameters needs to be considered while optimizing the process.

Antibacterial effect and mechanisms of action of 460-470 nm light-emitting diode against Listeria monocytogenes and Pseudomonas fluorescens on the surface of packaged sliced cheese

The aim of this study was to investigate the antibacterial effect of 460-470 nm light-emitting diode (LED_460-470nm) illumination against pathogens and spoilage bacteria on the surface of agar media and packaged sliced cheese. LED_460-470nm illumination highly inhibited the growth of Listeria monocytogenes and Pseudomonas fluorescens on agar media covered with oriented polypropylene (OPP) film (thickness, 0.03 mm). When sliced cheeses inoculated with L. monocytogenes or P. fluorescens and packaged with OPP film were illuminated by an LED_{460-470 nm} at 4 or 25 °C, reduction levels of L. monocytogenes and P. fluorescens on packaged slice cheese were higher at 4 °C than at 25 °C. There were no significant differences in color between non-illuminated and illuminated sliced cheese after storage for 7 d at 4 °C. LED_{460-470 nm} illumination at 4 °C for 4 d caused cellular injury of L. monocytogenes and P. fluorescens related to RNA, protein, and peptidoglycan metabolism, and a disruption of the cell membrane and loss of cytoplasmic components were observed from TEM results. These results suggest that LED_{460-470 nm} illumination, in combination with refrigeration temperatures, may be applied to extend the shelf-life of packaged slice cheese and minimize the risk of foodborne disease, without causing color deterioration.