Storage and digestion stability of encapsulated curcumin in emulsions based on starch granule Pickering stabilization

Unveiling the significance of gastric digestion in gastrointestinal fate of octenylsuccinylated starch-stabilized emulsions

The importance of gastric digestion in starch-based emulsion is often overshadowed compared to intestinal digestion, despite acknowledging the activity of salivary α-amylase in the stomach. This study aimed to address this gap by investigating the digestion of starch-based emulsions through orogastrointestinal digestion experiments. Our observations revealed the crucial role of salivary α-amylase, which hydrolyzed ∼8 %, ∼56 %, and ∼ 28 % of starch in emulsions stabilized by octenylsuccinylated maize starch (OMS-E), gelatinized OMS (GOMS-E), and retrograded OMS (ROMS-E), respectively, during the gastric phase. Consequently, ∼23 % of the oil in GOMS-E underwent lipolysis during this phase, whereas ∼13 and ∼ 6 % of the oil was lipolyzed in OMS-E and ROMS-E, respectively. These phenomena significantly influenced their small intestinal digestion and the bioaccessibility of encapsulated curcumin. Notably, GOMS-E exhibited ∼28 % lower curcumin bioaccessibility than that of curcumin encapsulated in OMS-E or ROMS-E. This difference was attributed to premature gastric digestion and subsequent encapsulant release in the case of GOMS-E. This understanding can be utilized to manipulate the delivery and digestion of starch-based emulsions. Importantly, our findings highlight the necessity of considering gastric amylolysis and lipolysis when investigating the gastrointestinal fate of starch-based emulsions.

Multiple Pickering emulsions stabilized by food-grade particles as innovative delivery systems for bioactive compounds

The most common carrier for encapsulation of bioactive components is still simple emulsion. Recently, bio-based novel emulsion systems such as multiple emulsions (MEs) and Pickering emulsions (PEs) have been introduced as innovative colloidal delivery systems for encapsulation and controlled release of bioactive compounds. Multiple PEs (MPEs), which carries both benefit of MEs and PEs could be fabricated by relatively scalable and simple operations. In comparison with costly synthetic surfactants and inorganic particles which are widely used for stabilization of both MEs and PEs, MPEs stabilized by food-grade particles, while having health-promoting aspects, are able to host the "clean label" and "green label" attributes. Nevertheless, in achieving qualified techno-functional attributes and encapsulation properties, the selection of suitable materials is a crucial step in the construction of such complex systems. Current review takes a cue from both MEs and PEs emulsification techniques to grant a robust background for designing various MPEs. Herein, various fabrication methods of MEs and PEs are described comprehensively in a physical viewpoint in order to find key conception of successful formulation of MPEs. This review also highlights the link between the underlying aspects and exemplified specimens of evidence which grant insights into the rational design of MPEs through food-based ingredients to introduces MPEs as novel colloidal/functional materials. Their utilization for encapsulation of bioactive compounds is discussed as well. In the last part, instability behavior of MPEs under various conditions will be discussed. In sum, this review aims to gain researchers who work with food-based components, basics of innovative design of MPEs.

Fabrication and characterization of chitosan-pectin emulsion-filled hydrogel prepared by cold-set gelation to improve bioaccessibility of lipophilic bioactive compounds

Chitosan-pectin emulsion-filled hydrogel (EFH) was developed to enhance the bioaccessibility of lipophilic bioactive compounds through intestinal delivery. The EFH, incorporating a sodium caseinate-stabilized emulsion, was prepared using cold-set gelation under acidic conditions without crosslinking agents. Increasing the pectin concentration (0.75-1.50%, w/v) improved the mechanical strength and compactness of the EFH. The pH-responsive EFH retained the emulsion at pH 2.0 and released it at pH 7.4. In vitro digestion demonstrated that the EFH remained intact during oral and gastric stages, while the emulsion alone became destabilized. During intestinal digestion, the release of free fatty acids from the EFH decreased from 58.67% to 43.76% as the pectin concentration increased from 0.75% to 1.50%. EFH with 0.75% and 1.00% pectin significantly improved curcumin bioaccessibility compared to the emulsion alone. These findings demonstrate the potential of chitosan-pectin EFH as a novel carrier system for enhancing the bioaccessibility of lipophilic bioactive compounds.

Starch-based particles as stabilizers for Pickering emulsions: modification, characteristics, stabilization, and applications

The potential utilization of starch as a particle-based emulsifier in the preparation of Pickering emulsions is gaining interest within the food industry. Starch is an affordable and abundant functional ingredient, which makes it an excellent candidate for the stabilization of Pickering emulsions. This review article focuses on the formation, stabilization, and properties of Pickering emulsions formulated using starch-based particles and their derivatives. First, methods of isolating and modifying starch-based particles are highlighted. The key parameters governing the properties of starch-stabilized Pickering emulsions are then discussed, including the concentration, size, morphology, charge, and wettability of the starch-based particles, as well as the type and size of the oil droplets. The physicochemical mechanisms underlying the ability of starch-based particles to form and stabilize Pickering emulsions are also discussed. Starch-based Pickering emulsions tend to be more resistant to coalescence than conventional emulsions, which is useful for some food applications. Potential applications of starch-stabilized Pickering emulsions are reviewed, as well as recent studies on their gastrointestinal fate. The information provided may stimulate the utilization of starch-based Pickering emulsions in food and other industries.

High-internal-phase emulsions stabilized by alkali-extracted green tea polysaccharide conjugates for curcumin delivery

Exploring the emulsification capabilities of tea polysaccharide conjugates (TPCs) in high-internal-phase emulsions (HIPEs) would further expand the utilization value of TPCs. This study aimed to prepare 0.1-0.5 wt% alkali-extracted green tea polysaccharide conjugate (gTPC-A)-stabilized HIPEs containing 75-87 wt% medium chain triglycerides (MCTs) to investigate their stability, rheology, microstructure, and loading and protective effects on curcumin. The findings revealed that only 0.1 wt% of gTPC-A could stabilize HIPEs containing 85 wt% oil for 30 days. HIPEs had better storage stability in a weakly acidic environment at pH 5.0-6.0 and at temperatures less than 70 °C. HIPEs could load curcumin and protect it from ultraviolet (UV) radiation and in vitro digestion. The half-life of curcumin loaded in HIPEs was 65 h under UV radiation. The curcumin bioaccessibility of HIPEs (56.29 %) was higher than that in MCT (8.73 %). These results provided a theoretical basis for the extensive use of TPCs.

Food LEGO: Building hollow cage and sheet superstructures from starch

The idea of building large structures from small building blocks has had a long history in the human imagination, from the beautifully intricate shells assembled from silica by unicellular algae to the Egyptian pyramids built from stone. Carrying this idea into the food industry has important implications. Here, we introduce a Pickering emulsion platform for building superstructures like hollow cages and sheets using starch granules as building blocks. In food, these superstructures occupy up to six times more space than their constituent parts, thereby delivering a viscosity greater by an order of magnitude than unstructured starch. To achieve this higher viscosity, they use an alternative superstructure mechanism as opposed to the classic swelling mechanism of individual particles. These super-thickeners may reduce calories, cut production costs, and stretch the global food supply, demonstrating how we can design the future by playing with our food.

Addition of Canna edulis starch and starch nanoparticles to stabilized Pickering emulsions: In vitro digestion and fecal fermentation

Starch nanoparticles (SNPs) were prepared through acid hydrolysis of Canna edulis native starch and modified with octenyl succinic anhydride (OSA) to yield OS-starch and OS-SNPs. These modified particles were used to stabilize curcumin-loaded Pickering emulsions. Effects on gut microbiota during in vitro fecal fermentation were examined. The surface of OS-starch exhibits a porous structure, while OS-SNPs display layered grooves. OSA modification was confirmed by Fourier transform infrared spectroscopy (with peaks at 1728 cm-1 and 1573 cm-1) and proton nuclear magnetic resonance spectra (0.5-2 ppm). The degree of substitution for OS-starch and OS-SNPs is 0.0106 ± 0.0004 and 0.0079 ± 0.0003, respectively. Following modification, the crystallinity decreased from 35.69 ± 0.46 % (native starch) to 30.17 ± 0.70 % (OS-starch), SNPs decreased from 45.87 ± 0.89 % to 43.63 ± 0.64 % (OS-SNPs). Contact angles for OS-starch and OS-SNPs are 77.47 ± 1.78 and 55.57 ± 0.21, respectively. OS-SNPs exhibited superior emulsification properties compared to OS-starch, forming stable Pickering emulsions with pseudoplastic fluid behavior and enhanced curcumin storage protection over 14 days (60.88 ± 4.26 %) with controlled release. Stabilizing Pickering emulsions with OS-starch and OS-SNPs positively affected on gut microbiota and improved the intestinal environment, showing promise for their application in transportation systems and innovative prebiotic food formulations.

Pulsed Electric Field-Assisted Enzymatic and Alcoholic-Alkaline Production of Porous Granular Cold-Water-Soluble Starch: A Carrier with Efficient Zeaxanthin-Loading Capacity

In this study, porous starch was modified using pulsed electric field (PEF) pretreatment and alcoholic-alkaline treatment to prepare porous granular cold-water-soluble starch (P-GCWSS). The soluble porous starch has high adsorption capability and high cold water solubility, allowing effective encapsulation of zeaxanthin and improving zeaxanthin's water solubility, stability, and bioavailability. The physical and chemical properties of GCWSS and complex were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The results showed that the cold water solubility of the pulsed electric field-treated porous granular cold-water-soluble starch (PEF-P-GCWSS) increased by 12.81% compared to granular cold-water-soluble starch (GCWSS). The pulsed electric field treatment also increased the oil absorption of PEF-P-GCWSS was improved by 15.32% compared to porous granular cold-water-soluble starch (P-GCWSS). PEF-P-GCWSS was effective in encapsulating zeaxanthin, which provided a good protection for zeaxanthin. The zeaxanthin-saturated solubility in water of PPG-Z was increased by 56.72% compared with free zeaxanthin. The zeaxanthin embedded in PEF-P-GCWSS was able to be released slowly during gastric digestion and released rapidly during intestinal digestion.

Stability and Digestive Properties of a Dual-Protein Emulsion System Based on Soy Protein Isolate and Whey Protein Isolate

The stability and digestive properties of a dual-protein emulsion consisting of soy protein isolate (SPI) and whey protein isolate (WPI) have been systematically studied. The results showed that the particle size and viscosity of the dual-protein emulsion system decreased continuously with the increase in WPI, and this might be related to the large amount of electric charge on the surface of the emulsion droplets. Dual-protein emulsions with ratios of 3:7 and 5:5 showed the highest emulsion activity, while emulsion stability increased with the increase in WPI. The thicker adsorption layer formed at the interface might have contributed to this phenomenon. After in-vitro-simulated digestion, the emulsion droplet particle size increased substantially due to the weakened electrostatic repulsion on the droplet surface, especially for the intestinal digestion phase. Meanwhile, WPI accelerated the release of free fatty acids in the digestion process, which played a positive role in the nutritional value of the dual-protein emulsion. In accelerated oxidation experiments, WPI also improved the antioxidant properties of the dual-protein emulsion system. This study will provide a new insight and necessary theoretical basis for the preparation of dual-protein emulsions.

Modified porous starches loading curcumin and improving the free radical scavenging ability and release properties of curcumin

Maize porous starch-curcumin microspheres were prepared by encapsulating curcumin into cross-linked porous starch and oxidized porous starch to investigate the effect of modified porous starch in embedding and protecting curcumin. The morphology and physicochemical properties of microspheres were analyzed using scanning electron microscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction, Zeta/DLS, Thermal stability, and antioxidant activity; the release of curcumin was evaluated with a simulated gastric-intestine model. The FT-IR results revealed that curcumin was amorphously encapsulated in the composite and hydrogen bond formation between starch and curcumin was one of the major driving forces for encapsulation. Microspheres increased the initial decomposition temperature of curcumin, which has a protective effect on curcumin. Modification improved the encapsulation efficiency and the scavenging free radical ability of porous starch. The release mechanism of curcumin from microspheres fits first-order and Higuchi models well in gastric and intestinal models, respectively, indicating that encapsulation of curcumin within different porous starches microspheres enables controlled release of curcumin. To recapitulate, two different modified porous starch microspheres improved the drug loading, slow release and free radical scavenging effects of curcumin. Among them, the cross-linked porous starch microspheres had higher encapsulation and slow release ability for curcumin than the oxidized porous starch microspheres. It provides theoretical significance and data basis for the encapsulation of active substances by modified porous starch.

Facile solid-phase synthesis of starch-fatty acid complexes via mechanical activation for stabilizing curcumin-loaded Pickering emulsions

Starch-fatty acid complexes used as emulsifiers have caught great attention because of their renewability and excellent emulsifying property, the development of a simple and efficient synthesis method for the fabrication of starch-fatty acid complexes is still greatly challenging. Herein, the rice starch-fatty acid complexes (NRS-FA) were successfully prepared by mechanical activation method using different long chain fatty acids (myristic acid, palmitic acid, and stearic acid) and native rice starch (NRS) as the raw materials. The results showed that the prepared NRS-FA with a V-shaped crystalline structure exhibited a higher digestion resistance than NRS. Moreover, when the chain length of fatty acids increased from 14 to 18 carbons, the contact angle of the complexes was much closer to 90°, and the average particle size was smaller, deriving the better emulsifying property of NRS-FA18 complexes, which were suitable to be used as an emulsifier to stabilize curcumin-loaded Pickering emulsions. The results of storage stability and in vitro digestion showed that the curcumin retention could reach 79.4 % after 28 days of storage and 80.8 % of curcumin was retained in the system after simulated gastric digestion, showing good encapsulation and delivery performance of prepared Pickering emulsions, which attributed to the enhancement of the coverage of particles at the oil-water interface.

Pickering Emulsions Based in Inorganic Solid Particles: From Product Development to Food Applications

Pickering emulsions (PEs) have attracted attention in different fields, such as food, pharmaceuticals and cosmetics, mainly due to their good physical stability. PEs are a promising strategy to develop functional products since the particles’ oil and water phases can act as carriers of active compounds, providing multiple combinations potentiating synergistic effects. Moreover, they can answer the sustainable and green chemistry issues arising from using conventional emulsifier-based systems. In this context, this review focuses on the applicability of safe inorganic solid particles as emulsion stabilisers, discussing the main stabilisation mechanisms of oil–water interfaces. In particular, it provides evidence for hydroxyapatite (HAp) particles as Pickering stabilisers, discussing the latest advances. The main technologies used to produce PEs are also presented. From an industrial perspective, an effort was made to list new productive technologies at the laboratory scale and discuss their feasibility for scale-up. Finally, the advantages and potential applications of PEs in the food industry are also described. Overall, this review gathers recent developments in the formulation, production and properties of food-grade PEs based on safe inorganic solid particles.

Gastrointestinal pH-Sensitive Pickering Emulsions Stabilized by Zein Nanoparticles Coated with Bioactive Glycyrrhizic Acid for Improving Oral Bioaccessibility of Curcumin

Pickering emulsions have received considerable attention for their stability and functionality. Environmentally responsive Pickering emulsions could be used as vehicles for oral administration. However, challenges still exist, such as nonbiocompatibility of emulsifier and mismatched response behavior in the gastrointestinal environment. In this study, a strategy was proposed that bioactive saponin glycyrrhizic acid (GA) was used as a pH-responsive substance to functionalize zein nanoparticles, and tannic acid (TA) was used as a primer for cross-linking GA and zein nanoparticles. The Pickering emulsions fabricated by zein/TA/GA nanoparticles (ZTGs) exhibited excellent stability at acid conditions while slowly demulsifying at neutral conditions, which can be further used as an intestine-targeted delivery system. Curcumin was encapsulated into ZTG-stabilized Pickering emulsions, and the encapsulation efficiency results suggested that the presence of GA coating remarkably facilitated the encapsulation of curcumin. An in vitro digestion study suggested that ZTGs provided protection for emulsions from pepsin hydrolysis and exhibited higher free fatty acid release as well as higher bioaccessibility of curcumin during simulated intestine digestion. This study provides an effective strategy to prepare pH-responsive Pickering emulsions for improving the oral bioaccessibility of hydrophobic nutraceuticals.

Comparison of properties and application of starch nanoparticles optimized prepared from different crystalline starches

Starch nanoparticles (SNPs) were produced by nanoprecipitation combined with ultrasonication with the use of different starches (corn, potato and sago starch) and used to stabilize Pickering emulsions. The orthogonal experiment was used to optimize preparation conditions of gelatinization pretreatment duration of 30 min, ultrasonic power of 600 W, and ultrasonic time of 40 min. Compared with native starch, the SNPs were spherical in shape and displayed a V-type crystalline structure with low relative crystallinity and higher degree of double-helix. Compared with native starch-Pickering emulsion, the SNP-Pickering emulsion had a smaller droplet size, more uniform distribution, clearer oil/water interface, and higher static stability of droplets. The sago SNP-Pickering emulsion had the great gelatinous structure and emulsion stability. In addition, the SNP-Pickering emulsion had the better loading efficiency and controlled release performance of curcumin. Meanwhile, the bioavailability of curcumin in sago SNP-Pickering emulsion was highest.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

Study of Competitive Displacement of Curcumin on α-zearalenol Binding to Human Serum Albumin Complex Using Fluorescence Spectroscopy

α-zearalenol (α-ZOL) is a mycotoxin with a strong estrogen effect that affects the synthesis and secretion of sex hormones and is transported to target organs through human serum albumin (HSA). Additionally, it has been reported that curcumin can also bind to HSA with high affinity at the same binding site as α-ZOL. Additionally, several studies reported that reducing the bound fraction of α-ZOL contributes to speeding up the elimination rate of α-ZOL to reduce its hazard to organs. Therefore, to explore the influence of a nutrition intervention with curcumin on α-ZOL effects, the competitive displacement of α-ZOL from HSA by curcumin was investigated using spectroscopic techniques, ultrafiltration techniques and HPLC methods. Results show that curcumin and α-ZOL share the same binding site (subdomain IIA) on HSA, and curcumin binds to HSA with a binding constant of 1.12 × 10⁵ M⁻¹, which is higher than that of α-ZOL (3.98 × 10⁴ M⁻¹). Ultrafiltration studies demonstrated that curcumin could displace α-ZOL from HSA to reduce α-ZOL’s binding fraction. Synchronous fluorescence spectroscopy revealed that curcumin could reduce the hydrophobicity of the microenvironment of an HSA–α-ZOL complex. This study is of great significance for applying curcumin and other highly active foodborne components to interfere with the toxicokinetics of α-ZOL and reduce its risk of its exposure.

In Vitro Release of Anthocyanins from Microencapsulated Natal Plum (Carissa macrocarpa) Phenolic Extract in Alginate/Psyllium Mucilage Beads

Natal plum (Carissa macrocarpa) contains anthocyanins, cyanidin 3-O-β-sambubioside (Cy-3-Sa), and cyanidin 3-O-glucoside (Cy-3-G) that possess great bioactive properties. During in vitro gastrointestinal digestion, Cy-3-Sa and Cy-3-G are highly sensitive to pH changes and have low bioaccessibility rates of 7.9% and 22%, respectively. This study aimed to therefore use microencapsulation techniques to improve the bioaccessibility of Cy-3-Sa and Cy-3-G. The crude anthocyanin-rich extract was extracted from freeze-dried Natal plum fruit using ultrasonic-assisted ethanol extraction. The anthocyanin-rich extract was encapsulated using the ionic gelation method. Four distinct carrier agents, namely sodium alginate, pectin, xanthan gum and psyllium mucilage were used to form the wall materials. Encapsulation efficiency was highest for alginate/psyllium mucilage beads (93.67%), while alginate showed the least efficiency (86.80%). Scanning Electron Microscopy revealed a cracked and porous structure for the Natal plum extract and a continuous smooth structure for all the beads. Fourier transform infrared spectroscopy showed peaks at 3300 and 1610 cm⁻¹, confirming the presence of polyphenols and polysaccharides in all beads. Thermal stability was higher for the alginate/psyllium mucilage beads and the observed thermal transitions were due to the bonds formed between the polymers and the polyphenols. Alginate beads combined with xanthan gum, pectin, and psyllium mucilage showed a prolonged release of anthocyanins compared to alginate in vitro alone. The highest anthocyanin bioaccessibility was obtained from alginate/psyllium mucilage beads (85.42 ± 1.03%). The results showed the effectiveness of alginate/psyllium mucilage beads in improving stability and in vitro anthocyanin release.

Are quinoa proteins a promising alternative to be applied in plant-based emulsion gel formulation?

Emulsion gels are structured emulsion systems that behave as soft solid-like materials. Emulsion gels are commonly used in food-product design both as fat replacers and as delivery carriers of bioactive compounds. Different plant-derived proteins like soy, chia, and oat have been used in emulsion gel formulation to substitute fat in meat products and to deliver some vegetable dyes or extracts. Quinoa protein isolates have been scarcely applied in emulsion gel formulation although they seem to be a promising alternative as emulsion stabilizers. Quinoa protein isolates have a high protein content with a well-balanced amino acid profile and show good emulsifying and gelling capabilities. Unlike quinoa starch, quinoa protein isolates do not require any chemical modification before being used. The present article reviews the state of the art in food emulsion gels stabilized with vegetable proteins and highlights the potential uses of quinoa proteins in emulsion gel formulation.

Oxidative stability of Pickering emulsions

•

Oxidative stability of O/W Pickering emulsions depends on their interfacial layer.

•

Solid particles can reduce Pickering emulsion oxidation by creating a thick interface.

•

Manipulating the charge of the interface can control Pickering emulsion oxidation.

•

Adding antioxidants to solid particles can reduce oxidation in Pickering emulsions.

In recent years, Pickering emulsions have been the focus of growing interest because of their possible role as alternatives to conventional emulsions. Some reviews have investigated the physical stability of Pickering emulsions, but the oxidative stability of these emulsions remains largely unexplored. In this review, the oxidation mechanism and factors affecting lipid oxidation rates in Pickering emulsions are discussed. Then, different food-grade solid particles are evaluated for their ability to stabilize Pickering emulsions. Finally, several strategies are reviewed for improving the oxidative stability of Pickering emulsions. These strategies are based on efforts to manipulate the physical and chemical properties of the interfacial layer, increase the concentration of antioxidants at the interfacial layer through incorporating them into solid particles, cause oil droplets to crowd at high packing fractions, trap oil droplets in a gel network and increase the viscosity of the continuous phase.

3-O-Ethyl-L-Ascorbic Acid Doped Enteric-Coated Gelatin Capsules towards the Advanced Oral Curcumin Delivery for Cancers

Among plant-derived polyphenols, curcumin has been recognized as a therapeutically potent nutrient presenting pleiotropic pharmacological effects on various cancers. However, the poor absorption and bioavailability of curcumin limit the use of this excellent naturally occurring polyphenol. 3-O-ethyl-L-ascorbic acid (EA) doped enteric-coated gelatin capsules were studied in the search for advanced oral curcumin delivery. The EA doped enteric-coated gelatin capsules were successfully created based on a developed inner dual enteric coating technique. When placed in four buffer solutions with different pHs (pH 2.0, 5.0, 6.0, and 7.3), the coated gelatin capsules showed delayed-release profiles of curcumin below pH 6.0. In contrast, both pristine and fabricated gelatin capsules showed similar curcumin release profiles at pH 7.3, which is a common pH observed in the lower gastrointestinal tract, especially intestinal regions. In conclusion, these results demonstrated the potential of the EA doped enteric-coated gelatin capsules in developing advanced oral delivery of curcumin targeting intestinal-specific regions.

Pickering emulsion stabilized by composite-modified waxy corn starch particles

The starch-based Pickering stabilizer has attracted more research interest recently, however, its application in food system is limited due to the low digestibility of raw starch particles. In this study, waxy corn starches were modified with octenyl succinic anhydride and then treated by dry heating at 180 °C for 20-60 min. Pickering emulsions stabilized by the composite-modified starch particles were fabricated, the physical stability, rheology property and microstructure of the emulsions were investigated. The results showed that the composite-modified starches maintained granule structure, their gelatinization temperatures and enthalpy significantly reduced after heat treatment (p < 0.05). Compared with native starch, the composite-modified starches had bigger three-phase contact angles and higher in vitro digestibility, while the relative crystallinity decreased from 32.46% to 24.87%. Pickering emulsions stabilized by composite-modified starch particles had long-term stability up to 300 days. The rheology results showed that all emulsions exhibited pseudoplastic behaviors and had higher storage modulus than loss modulus. Moreover, the viscosities decreased when the starch was roasted for 40 and 60 min. The composite-modified starch particles and few starch macromolecules at oil-water interface stabilized the emulsions collectively. These results provide a new strategy for designing an edible Pickering stabilizer.

Stimuli-Responsive Pickering Emulsions Regulated via Polymerization-Induced Self-Assembly Nanoparticles

With the development of reversible deactivated radical polymerization techniques, polymerization-induced self-assembly (PISA) is emerging as a facile method to prepare block copolymer nanoparticles in situ with high concentrations, providing wide potential applications in different fields, including nanomedicine, coatings, nanomanufacture, and Pickering emulsions. Polymeric emulsifiers synthesized by PISA have many advantages comparing with conventional nanoparticle emulsifiers. The morphologies, size, and amphiphilicity can be readily regulated via the synthetic process, post-modification, and external stimuli. By introducing stimulus responsiveness into PISA nanoparticles, Pickering emulsions stabilized with these nanoparticles can be endowed with "smart" behaviors. The emulsions can be regulated in reversible emulsification and demulsification. In this review, the authors focus on recent progress on Pickering emulsions stabilized by PISA nanoparticles with stimuli-responsiveness. The factors affecting the stability of emulsions during emulsification and demulsification are discussed in details. Furthermore, some viewpoints for preparing stimuli-responsive emulsions and their applications in antibacterial agents, diphase reaction platforms, and multi-emulsions are discussed as well. Finally, the future developments and applications of stimuli-responsive Pickering emulsions stabilized by PISA nanoparticles are highlighted.

Encapsulation of a Desmodium intortum Protein Isolate Pickering Emulsion of β-Carotene: Stability, Bioaccesibility and Cytotoxicity

Owing to their excellent characteristics, Pickering emulsions have been widely used in the development and the application of new carriers for embedding and for delivering active compounds. In this study, β-carotene was successfully encapsulated in a Pickering emulsion stabilized using Desmodium intortum protein isolate (DIPI). The results showed that the encapsulation efficiencies of β-carotene in the control group Tween 20 emulsion (TE) and the DIPI Pickering emulsion (DIPIPE) were 46.7 ± 2.5% and 97.3 ± 0.8%, respectively. After storage for 30 days at 25 °C and 37 °C in a dark environment, approximately 79.4% and 72.1% of β-carotene in DIPIPE were retained. Compared with TE, DIPIPE can improve the stability of β-carotene during storage. In vitro digestion experiments showed that the bioaccessibility rate of β-carotene in DIPIPE was less than that in TE. Cytotoxicity experiments showed that DIPI and β-carotene micelles within a specific concentration range exerted no toxic effects on 3T3 cells. These results indicate that DIPIPE can be used as a good food-grade carrier for embedding and transporting active substances to broaden the application of the protein-based Pickering emulsion system in the development of functional foods.

Superiority of Microencapsulated Essential Oils Compared With Common Essential Oils and Antibiotics: Effects on the Intestinal Health and Gut Microbiota of Weaning Piglet

Essential oils (EOs) have long been considered an alternative to antibiotics in the breeding industry. However, they are unstable and often present unpleasant odors, which hampers their application. Microencapsulation can protect the active gradients from oxidation and allow them to diffuse slowly in the gastrointestinal tract. The purpose of this study was to investigate the effect of microencapsulation technology on the biological function of EOs and the possibility of using microencapsulate EOs (MEEOs) as an alternative to antibiotics in weaning piglets. First, we prepared MEEOs and common EOs both containing 2% thymol, 5% carvacrol and 3% cinnamaldehyde (w/w/w). Then, a total of 48 weaning piglets were randomly allotted to six dietary treatments: (1) basal diet; (2) 75 mg/kg chlortetracycline; (3) 100 mg/kg common EOs; (4) 500 mg/kg common EOs; (5) 100 mg/kg MEEOs; and (6) 500 mg/kg MEEO. The trial lasted 28 days. The results showed that piglets in the 100 mg/kg MEEOs group had the lowest diarrhea index during days 15–28 (P < 0.05). In addition, 100 mg/kg MEEOs significantly alleviated intestinal oxidative stress and inflammation (P < 0.05), whereas 500 mg/kg common EOs caused intestinal oxidative stress (P < 0.05) and may lead to intestinal damage through activation of inflammatory cytokine response. MEEOs (100 mg/kg) significantly reduced the ratio of the relative abundance of potential pathogenic and beneficial bacteria in the cecum and colon (P < 0.05), thus contributing to the maintenance of intestinal health. On the other hand, chlortetracycline caused an increase in the ratio of the relative abundance of potential pathogenic and beneficial bacteria in the colon (P < 0.05), which could potentially have adverse effects on the intestine. The addition of a high dose of MEEOs may have adverse effects on the intestine and may lead to diarrhea by increasing the level of colonic acetic acid (P < 0.05). Collectively, the results suggest that microencapsulation technology significantly promotes the positive effect of EOs on the intestinal health of weaning piglets and reduces the adverse effect of EOs, and 100 mg/kg MEEOs are recommended as a health promoter in piglets during the weaning period.

Progress in Colloid Delivery Systems for Protection and Delivery of Phenolic Bioactive Compounds: Two Study Cases—Hydroxytyrosol and Curcumin

Insufficient intake of beneficial food components into the human body is a major issue for many people. Among the strategies proposed to overcome this complication, colloid systems have been proven to offer successful solutions in many cases. The scientific community agrees that the production of colloid delivery systems is a good way to adequately protect and deliver nutritional components. In this review, we present the recent advances on bioactive phenolic compounds delivery mediated by colloid systems. As we are aware that this field is constantly evolving, we have focused our attention on the progress made in recent years in this specific field. To achieve this goal, structural and dynamic aspects of different colloid delivery systems, and the various interactions with two bioactive constituents, are presented and discussed. The choice of the appropriate delivery system for a given molecule depends on whether the drug is incorporated in an aqueous or hydrophobic environment. With this in mind, the aim of this evaluation was focused on two case studies, one representative of hydrophobic phenolic compounds and the other of hydrophilic ones. In particular, hydroxytyrosol was selected as a bioactive phenol with a hydrophilic character, while curcumin was selected as typical representative hydrophobic molecules.

Curcumin, a potent therapeutic nutraceutical and its enhanced delivery and bioaccessibility by pickering emulsions

Curcumin is a biomolecule with functional moieties, which contribute to its anti-inflammatory, anticancer, and antioxidant properties. It has shown several therapeutic effects on treating inflammatory and neurodegenerative diseases and contributes to the reduction of oxidative stress and damage to body tissues. However, its low solubility and fast metabolism limit its absorption in the gastrointestinal (GI) tract and lead to its low bioavailability. Preparation of Pickering emulsions stabilized with mineral or biopolymer-based nanoparticles can be an effective strategy for enhancing the stability of curcumin against degradation, increasing its bioaccessibility in the GI tract, and achieving its controlled release at various locations based on changes in environmental conditions. Various nanoparticles prepared from minerals, proteins, and polysaccharides show potential for stabilizing the curcumin-loaded emulsions, and their wettability can be altered through complexation and formation of hybrid nanoparticles. Stabilization of Pickering emulsions with polysaccharide-based nanoparticles and their complexes can enhance the stability of the curcumin against degradation. Moreover, various protein-based nanoparticles and their conjugated forms with other proteins or polysaccharides can enable the preparation of high internal phase Pickering emulsions (HIPEs) with concomitant higher loading and bioaccessibility of the curcumin molecule. In light of the several therapeutic properties of curcumin, this review article aims to highlight recent studies and the strategies used for the preparation of curcumin Pickering emulsions stabilized by various nanoparticles for enhancing its bioaccessibility during metabolism. These may be useful in pharmaceutical and food industries for drug development and delivery and fortification of food products with this nutraceutical component.

Physicochemical, rheological, and emulsification properties of nonenyl succinic anhydride (NSA) modified quinoa starch

Nonenyl succinic anhydride (NSA) modification could be an alternative to octenyl succinic anhydride (OSA) modification of starch to obtain a range of physicochemical and rheological properties and for emulsification applications. A series of NSA-modified quinoa starches in granular form with different degrees of substitution (DS) (0.0080, 0.0175, 0.0359, and 0.0548) were prepared. The NSA modifications reduced the gelatinization temperatures and frequency dependence of storage modulus (G'), while increasing the peak viscosity, gel hardness, and G'. The NSA-modified quinoa starches with medium DS were the most effective in stabilising Pickering emulsions. The droplet size of Pickering emulsions decreased first with increasing DS before increasing at the highest DS. Modified starch with a DS of 0.0359 had the highest emulsifying capacity. Apart from the commonly used octenyl succinic anhydride (OSA) modification, the NSA-modified starches could be potential candidates as efficient Pickering emulsion stabilizers.

Recent Developments in the Formulation and Use of Polymers and Particles of Plant-based Origin for Emulsion Stabilizations

The main scope of this Review was the recent progress in the use of plant-based polymers and particles for the stabilization of Pickering and non-Pickering emulsion systems. Due to their availability and promising performance, it was discussed how the source, modification, and formulation of cellulose, starch, protein, and lignin-based polymers and particles would impact their emulsion stabilization. Special attention was given toward the material synthesis in two forms of polymeric surfactants and particles and the corresponding formulated emulsions. Also, the effects of particle size, degree of aggregation, wettability, degree of substitution, and electrical charge in stabilizing oil/water systems and micro- and macro-structures of oil droplets were discussed. The wide range of applications using such plant-based stabilizers in different technologies as well as their challenge and future perspectives were described.

Comparison of bioaccessibility of astaxanthin encapsulated in starch-based double emulsion with different structures

In this study, different types of starch-based double emulsion (SDE) structures were developed to improve the bioavailability of astaxanthin (AST). Droplet size, microstructure, zeta potential of the AST-loaded SDEs were measured during in vitro digestion model. Compared with the C-type SDEs prepared with high amylose starch (HAS), the AST-loaded SDEs prepared using native corn starch of 5 wt% (B-type structure) and 7 wt% (A-type structure) presented small mean droplet diameters (MA = 11.18 ± 0.40 μm and 8.23 ± 0.37 μm, respectively) and were more stable after simulated gastric digestion. Furthermore, the lipid digestion products (free fatty acids) were studied after simulated intestinal digestion. Interestingly, the bioaccessibility (57.54 ± 1.88%) of AST-loaded SDEs prepared by HAS was six times higher than that of digested unencapsulated AST. Thus, SDEs were found to be suitable carriers for liposoluble nutrient delivery and bioavailability in foods, beverages, and nutraceuticals.

Pickering emulsifiers based on enzymatically modified quinoa starches: Preparation, microstructures, hydrophilic property and emulsifying property

Quinoa starch was developed as a new kind of Pickering emulsifier by enzymatic modification. The morphological structure, crystalline structure, lamellar structure, fractal structure, particle size distribution, contact angle, emulsion index (EI), and emulsion micromorphology were studied to explore the relationship between structure characteristics, hydrophilic property, and emulsifying properties of enzymatically modified (EM) quinoa starches. With the increasing enzymatic hydrolysis time in the test range of 0-9 h, particle size of EM quinoa starch decreased, and the broken starch and contact angle of EM quinoa starch increased; the EI value of emulsions with EM quinoa starch increased, and the oil droplet size of emulsions with EM quinoa starch decreased. It suggested that both the smallest particle size and the closest extent of the contact angle to 90° derived the best emulsifying property of EM-9. The EM quinoa starch had higher emulsifying capacity at higher oil volume fraction (Φ) (50%) than at lower Φ (20%), proving that the EM starch has potential to be used as Pickering emulsifiers in higher oil products, such as salad dressing.

Metal-Organic Framework-Stabilized High Internal Phase Pickering Emulsions Based on Computer Simulation for Curcumin Encapsulation: Comprehensive Characterization and Stability Mechanism

High internal phase Pickering emulsions (HIPPEs) have taken a center stage in the arena of delivery systems in the food industry because of their high loading capacity and stability. In addition, metal-organic frameworks (MOFs), a type of cutting-edge designable porous scaffolding material, have attracted attention in reticular chemistry, which satisfies fundamental demands for delivery research in the past years. Here, we demonstrate a novel metal-organic framework (MOF)-stabilized HIPPE delivery system for hydrophobic phytochemicals. First, a novel high-biocompatibility and stable MOF particle, UiO-66-NH₂, was selected from atomic simulation screening, which showed proper electronegativity and amphiphilic properties to develop the HIPPE system. Monodispersed UiO-66-NH₂ nanoparticles with the particle size of 161.36 nm were then prepared via solvothermal synthesization. Pickering emulsions with inner phase ratios from 50 to 80% with varied contents of polyethylene glycol (PEG) were prepared by in situ high-pressure homogenization, and their physicochemical properties including crystallography, morphology, and rheology were systematically characterized. Subsequently, curcumin, a model antioxidant, was loaded in the HIPPE system and named cur@UiO-66-NH₂/HIPPE. It exhibited high loading capacity, up to 6.93 ± 0.41%, and encapsulation efficiency (19.76 ± 3.84%). This novel MOF nanoparticle-stabilized HIPPE delivery system could be practically utilized for other bioactive components and antimicrobial agents, which would find applications in food safety and biomedical areas in the future.

Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Pickering emulsions stabilized by micro/nanoparticles have attracted considerable attention owing to their great potential in various applications ranging from cosmetic and food industries to catalysis, tissue engineering and drug delivery. There is a growing demand to design "green" micro/nanoparticles for constructing stable Pickering emulsions. Micro/nanoparticles derived from the naturally occurring polysaccharides including cellulose, chitin, chitosan and starch are capable of assembling at oil/water interfaces and are promising green candidates because of their excellent biodegradability and renewability. The physicochemical properties of the micro/nanoparticles, which are determined by the fabricating approaches and/or post-modification methods, have a significant effect on the characteristics of the final Pickering emulsions and their applications. Herein, recent advances on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles and the construction of functional materials including porous foams, microcapsules and latex particles from these emulsions as templates, are reviewed. In particular, the effects of micro/nanoparticles properties on the characteristics of the Pickering emulsions and their applications are discussed. Furthermore, the obstacles that hinder the practical applications of polysaccharides-based micro/nanoparticles and Pickering emulsions as well as the prospects for the future development, are discussed.