Physicochemical properties and oil/water interfacial adsorption behavior of cod proteins as affected by high-pressure homogenization

The impact of fish oil oxidation on interfacial properties and system stability of cod protein

In aquatic food multiphase interface systems, proteins and lipids coexist concurrently. Among them, lipids, particularly fish oil rich in polyunsaturated fatty acids, are susceptible to oxidation, resulting in oxidized products exhibiting similar interfacial activity as amphiphilic proteins. However, the interaction between oxidized fish oil products and proteins within the interface system remains unclear. As a result, this study is focused on investigating the effects of varying levels of oxidation in fish oil on the interfacial behavior of cod protein (CP), as well as on the stability, microstructure, and rheological properties of CP-fish oil emulsions. The findings revealed a significant decrease in interfacial tension (lower than 5 mN/m) at the oil-water interface after only 24 h of fish oil oxidation. Moreover, fish oil oxidation negatively influenced the behavior of cod protein at the interface, primarily manifested in the inhibition of infiltration, and rearrangement processes. Additionally, the oxidation of fish oil was found to significantly affect the centrifugal stability of the emulsion, resulting in a decrease in particle size, an increase in the absolute value of zeta potential, and improved rheological stability. The exploration of the interaction mechanism between fish oil oxidation and interface protein can offer scientific guidance for addressing the issue of uncontrollable product quality caused by fish oil oxidation in aquatic food process.

Effect of chickpea protein modified with combined heating and high-pressure homogenization on enhancing the gelation of reduced phosphate myofibrillar protein

The effects of chickpea protein (CP) modified by heating and/or high-pressure homogenization (HPH) on the gelling properties of myofibrillar protein under reduced phosphate conditions (5 mM sodium triphosphate, STPP) were investigated. The results showed that heating and HPH dual-modified CP could decrease the cooking loss by 29.57 %, elevate the water holding capacity by 17.08 %, and increase the gel strength by 126.88 %, which conferred myofibrillar protein with gelation performance comparable with, or even surpassing, that of the high-phosphate (10 mM STPP) control. This gelation behavior improvement could be attributed to enhanced myosin tail-tail interactions, decreased myosin thermal stability, elevated trans-gauche-trans disulfide conformation, strengthened hydrophobic interactions and hydrogen bonding, the uncoiling of α-helical structures, the formation of well-networked myofibrillar protein gel, and the disulfide linkages between the myosin heavy chain, actin, and CP subunits. Therefore, the dual-modified CP could be a promising phosphate alternative to develop healthier meat products.

Modification of hempseed protein isolate using a novel two-stage method applying high-pressure homogenization coupled with high-intensity ultrasound

Hempseed protein isolate (HPI), a novel plant protein, possesses advantages as an alternative food protein from a nutritional and sustainable perspective. This study investigated HPI modification by examining the effects of high-pressure homogenization combined with high-intensity ultrasound (HPH + HIU) on the physicochemical and functionality of HPI. Firstly, the optimal homogenization pressure (180 MPa) was selected based on the solubility and particle size of HPI. Then, the effect of ultrasonic treatment time (2, 5, and 10 min) was studied at the optimal homogenization pressure. The results showed increased solubility of HPI after all treatments. Particularly, the HPH + HIU2min treatment had a synergistic effect that maximumly increased the solubility of HPI from 6.88 % to 22.89 % at neutral pH. This treatment significantly decreased the HPI's particle size, β-sheet and total sulfhydryl contents while maximizing the random coil level, intrinsic fluorescence intensity and surface hydrophobicity compared to the single HPH or HIU2min treatments. The protein structure was modified and unfolded, enhancing the water-protein and oil-protein interactions, as reflected in the increase in water and oil absorption, foaming and emulsifying properties. However, extending the ultrasonic time to 5 min for the HPH + HIU treatment increased protein particle size and weakened the functional properties of HPI. Further prolonging the ultrasonic time to 10 min partially loosened the protein aggregates and restored the functional properties of HPI to some extent. The findings indicate a promising application of HPH + HIU as an efficient way for HPI modification to facilitate its broader application in the food industry.

pH-induced interface protein structure changes to adjust the stability of tilapia protein isolate emulsion prepared by high-pressure homogenization

The pH is a crucial external factor affecting the structure and emulsification characteristics of proteins. The current study aimed to reveal the correlation between the secondary structure changes and tilapia protein isolate (TPI) emulsion stability under different pH (3.0-10.0) prepared by high-pressure homogenization. The results showed that TPI with significantly increased solubility and emulsifying properties when the pH keep away from the isoelectric point (pH 5.0). Meanwhile, TPI emulsions presented significantly enhanced stability (with decreased particle size, increased zeta potential, creaming index close to 0, and uniform dispersion of droplets) at pH 3.0 and 10.0. Interface-adsorbed protein mainly consists of a myosin-heavy chain and actin, and the secondary structure was significantly influenced by pH and high-pressure homogenization. The α-helix will be transformed into β-sheet and β-turn when pH is closer to pH 5.0. However, the high-pressure homogenization induced α-helix conversion to β-sheet. The correlation analysis revealed that emulsion stability is positively correlated with α-helix and negatively correlated with β-sheet. This work provides a deep insight into the correlation between secondary structure changes and the stability of TPI emulsion as affected by pH to offer an alternative way to enhance TPI emulsion stability.

Soy protein particles as stabilizers of heat-stable O/W emulsions with 20% protein content

In response to the increasing demand for nutritionally rich foods, consumer preference for protein-enriched beverages has grown. However, heat-induced protein aggregation and gelation significantly hinders the production of high-protein drinks. In this study, oil-in-water (O/W) emulsions with exceptional thermal stability were formulated using modified soy protein particles (MSPs). These MSPs effectively resisted gel formation, even at a protein concentration of up to 20% (w/v). In contrast, emulsions prepared with untreated soy proteins (SPs) experienced pronounced gelation under identical conditions. The compact structure of MSPs, in comparison to SPs, imparted resistance to heat-induced denaturation and aggregation. Additionally, the emulsion displayed heightened heat processing insensitivity, due to the enhanced hydrophobicity of MSPs and their rapid adsorption at the oil-water interface, resulting in a denser, more elastic, and resilient interfacial film. These findings provide practical insights for the formulation of protein-rich milk alternatives, meeting the evolving market demands.

Study on stabilized mechanism of high internal phase Pickering emulsions based on commercial yeast proteins: Modulating the characteristics of Pickering particle via sonication

The primary significance of this work is that the commercial yeast proteins particles were successfully used to characterize the high internal phase Pickering emulsions (HIPPEs). The different sonication time (0,3,7,11,15 min) was used to modulate the structure and interface characteristics of yeast proteins (YPs) that as Pickering particles. Immediately afterward, the influence of YPs particles prepared at different sonication time on the rheological behavior and coalescence mechanism of HIPPEs was investigated. The results indicate that the YPs sonicated for 7 min exhibited a more relaxed molecular structures and conformation, the smallest particle size, the highest H0 and optimal amphiphilicity (the three-phase contact (θ) was 88.91°). The transition from extended to compact conformations of YPs occurred when the sonication time exceeded 7 min, resulting in an augmentation of size of YPs particles, a reduction in surface hydrophobicity (H0), and an elevation in hydrophilicity. The HIPPEs stabilized by YPs particles sonicated for 7 min exhibited the highest adsorption interface protein percentage and a more homogeneous three-dimensional (3D) protein network, resulting in the smallest droplet size and the highest storage (G'). The HIPPEs sample that stabilized by YPs particles sonicated for 15 min showed the lowest adsorption protein percentage. This caused a reduction in the thickness of its interface protein layer and an enlargement in the droplet diameter (D [3,2]). It was prone to droplet coalescence according to the equation used to evaluate the coalescence probability of droplets (Eq (2)). And the non-adsorbed YPs particles form larger aggregation structures in the continuous phase and act as "structural agents" in 3D protein network. Therefore, mechanistically, the interface protein layer formed by YPs particles sonicated 7 min contributed more to HIPPEs stability. Whereas the "structural agents" contributed more to HIPPEs stability when the sonication time exceeded 7 min. The present results shed important new light on the application of commercial YPs in the functional food fields, acting as an available and effective alternative protein.

Multi-scale ultrasound induced composite coacervates of whey protein and pullulan polysaccharide on emulsion forming and stabilizing mechanisms

A non-destructive technique known as multi-scale ultrasound (MSU) was employed to modify the emulsion consisting of glycosylated bovine whey protein (WP) and pullulan (Pu). To assess the effect on the structural and emulsifying properties of the WP-Pu, the formulated emulsion, was treated with divergent MSU at (single: 20 kHz, 40 kHz, and 60 kHz; dual: 20-40 kHz, 40-60 kHz, and 20-60 kHz; and tri: 20-40-60 kHz) frequency for a duration of 30 min. The tri-frequency, treated emulsion showed improved emulsifying stability compared to the control and MSU-treated single, and dual-frequency samples, as indicated by the particle size, structural morphology, and adsorbed protein. The molecular docking and numerous spectral analysis provided evidence that WP can undergo successful phenolation. This modified form of WP then interacts with Pu through various forces, including H-bonding and other mechanisms, resulting in the formation of a composite emulsion. The rheological properties revealed that both the control emulsion and the MSU-treated emulsion exhibited non-Newtonian pseudoplastic flow behavior. This behavior is characterized by shear thinning, where the viscosity decreases with increasing shear rate. The shear rates tested ranged from 1 to 300 1/s, additionally, the degree of crystallinity increased from 18.2° to 19.4°. Overall, the tri-frequency effect was most pronounced compared to single and dual-frequency. Ultrasonication, an emerging non-thermal technology, proves to be an efficient approach for the formulation of WP-Pu composites. These composites have significant potential for use in drug delivery systems and functional foods.

Leveraging new opportunities and advances in high-pressure homogenization to design non-dairy foods

High-pressure homogenization (HPH) and ultrahigh-pressure homogenization (UHPH) are emerging food processing techniques for stabilizing emulsions and food components under the pressure range from 60 to 400 MPa. Apart from this, they also support increasing nutritional profile, food preservation, and functionality enhancement. Even though the food undergoes the shortest processing operation, the treatment leads to modification of physical, chemical, and techno-functional properties, in addition to the formation of micro-sized particles. This study focuses on recent advances in using HPH/UHPH on plant-based milk sources such as soybeans, almonds, hazelnuts, and peanuts. Overall, this systematic review provides an in-depth analysis of the principles of HPH/UHPH, the mechanism of action, and their applications in other nondairy areas such as fruits and vegetables, meat, fish, and marine species. This work also deciphers the role of HPH/UHPH in modifying food components, their functional quality enhancement, and their provision of oxidative resistance to many foods. HPH is not only perceived as a technique for size reduction and homogenization; however, it does various functions like microbial inactivation, improvement of rheologies like texture and consistency, decreasing of lipid oxidation, and making positive modifications to proteins such as changes to the secondary structure and tertiary structure thereby enhancing the emulsifying properties, hydrophobicity of proteins, and other associated functional properties in many nondairy sources at pressures of 100-300 MPa. Thus, HPH is an emerging technique with a high throughput and commercialization value in food industries.

Microfluidization of soybean protein isolate-tannic acid complex stabilized emulsions: Characterization of emulsion properties, stability and in vitro digestion properties

Emulsion stability and sustained-release can be improved with a non-covalent complexing of a soybean protein isolate (SPI) with -tannic acid (TA) and dynamic high-pressure microfluidization (DHPM). The microstructure, physicochemical properties, and interfacial properties were investigated. The properties of the DHPM-treated emulsions were improved significantly, with the 120 MPa DHPM-treated SPI-TA emulsion (SPI-TA 120) having the best microstructure. The highest interface protein content, viscosity and viscoelasticity at 120 MPa of pressure facilitated the stability of the emulsion. The oxidation kinetics of emulsions was established. It was demonstrated that the oxidation stability of SPI-TA 120 was higher than SPI and SPI-TA emulsions without DHPM treatment. In addition, DHPM-treated SPI-TA emulsions showed the most positive effect on the slow release of curcumin compared to the control group. The formation of non-covalent protein complexes with polyphenols and DHPM treatment effectively increases the stability of emulsions.

Effects of limited enzymatic hydrolysis and polysaccharide addition on the physicochemical properties of emulsions stabilized with duck myofibrillar protein under low-salt conditions

This study aimed to investigate the role of hydrolysis and guar gum (GG) participation on the emulsification of the duck myofibrillar protein (MP) and the related stability of oil-in-water emulsion in low-salt condition. Emulsions were prepared using one of each or both treatments, and that prepared with trypsin hydrolysis and GG (T-GG) exhibited the highest stability. FTIR analysis confirmed the hydrogen bond interactions between the system components. T-GG treatment improved emulsion properties and decreased oil droplet size. Moreover, CLSM indicated that aggregation of T-GG oil droplets was prevented. Physical stability was assessed such as Turbiscan stability index, creaming index, and rheological properties. The adsorbed percentage for T-GG was the lowest. However, interfacial tension, droplet size, stability, and peroxide value analyses indicated that a denser interfacial membrane structure is formed with T-GG. Thus, T-GG treatment could be applied in the food industry, such as in nutrient delivery systems and fat mimetics.

A novel strategy for improving the stability of myofibrillar protein emulsions at low ionic strength using high-intensity ultrasound combined with non-enzymatic glycation

Poor emulsification of myofibrillar proteins (MPs) limits the production of meat protein emulsion-type products, and it is related to the myosin self-assembles in low-salt settings. The effect of high-intensity ultrasound (HIU) pretreatment combined with non-enzymatic glycation on MP-stabilized emulsions in low-salt settings was investigated in this study, and the potential mechanism was revealed. The results indicated that, compared to using either HIU or glycation treatment alone, HIU pretreatment in combination with glycation significantly improves the physical stability of emulsions while increasing the distribution uniformity and reducing the droplet particle size from 18.05 μm to 2.54 μm (P < 0.05). Correspondingly, the emulsion prepared using this approach exhibited a relatively high absolute zeta potential (-23.58 mV) and a high interfacial protein content (38.78 %) (P < 0.05), promoting molecular rearrangement and forming a continuous and stable interfacial layer. HIU pretreatment combined with glycation could offer reinforced electrostatic repulsion and steric hindrance to depolymerize self-assembled filamentous polymers, thus enhancing the stability of droplets. Additionally, the thermal sensitivity of the glycated MPs pretreated by HIU was remarkably reduced, thus improving the thermal stability of the corresponding emulsions.

The Emulsifying Properties, In Vitro Digestion Characteristics and Storage Stability of High-Pressure-Homogenization-Modified Dual-Protein-Based Emulsions

The droplet size, zeta potential, interface protein adsorption rate, physical stability and microrheological properties of high-pressure-homogenization (HPH)-modified, dual-protein-based whey-soy (whey protein isolate-soy protein isolate) emulsions containing different oil phase concentrations (5%, 10% and 15%; w/w) were compared in this paper. The in vitro digestion characteristics and storage stability of the dual-protein emulsions before and after HPH treatment were also explored. The results show that with an increase in the oil phase concentration, the droplet size and interface protein adsorption rate of the untreated dual-protein emulsions increased, while the absolute value of the zeta potential decreased. When the oil phase concentration was 10% (w/w), HPH treatment could significantly reduce the droplet size of the dual-protein emulsion, increase the interface protein adsorption rate, and improve the elasticity of the emulsion. Compared with other oil phase concentrations, the physical stability of the dual-protein emulsion containing a 10% (w/w) oil phase concentration was the best, so the in vitro digestion characteristics and storage stability of the emulsions were studied. Compared with the control group, the droplet size of the HPH-modified dual-protein emulsion was significantly reduced after gastrointestinal digestion, and the in vitro digestibility and release of free amino groups both significantly increased. The storage stability results show that the HPH-modified dual-protein emulsion showed good stability under different storage methods, and the storage stability of the steam-sterilized dual-protein emulsion stored at room temperature was the best. These results provide a theoretical basis for the development of new nutritional and healthy dual-protein liquid products.

The Effect of High Pressure Homogenization on the Structure of Dual-Protein and Its Emulsion Functional Properties

It has been proven that high-pressure homogenization (HPH) could improve the functional properties of proteins by modifying their structure. This study researched the effect of HPH on the structural and functional properties of whey-soy dual-protein (Soy Protein Isolation-Whey Protein Isolation, SPI-WPI). Different protein solution samples were treated with HPH at 30, 60, 90, 120 and 150 MPa, and the structure changed under different pressures was analyzed by measuring particle size, zeta potential, Fourier infrared spectrum (FTIR), fluorescence spectrum and scanning electron microscope (SEM). The results showed that HPH significantly reduced the particle size of SPI-WPI, changed the secondary and tertiary structures and improved the hydrophobic interaction between molecules. In addition, HPH significantly improved the solubility and emulsification of all proteins, and the improvement effect on SPI-WPI was significantly better than SPI and WPI. It was found that SPI-WPI treated with 60 MPa had the best physicochemical properties. Secondly, we researched the effect of HPH by 60 MPa on the emulsion properties of SPI-WPI. In this study, the SPI-WPI had the lowest surface tension compared to a single protein after HPH treatment. The emulsion droplet size was obviously decreased, and the elastic properties and physical stability of SPI-WPI emulsion were significantly enhanced. In conclusion, this study will provide a theoretical basis for the application of HPH in modifying the structure of dual-protein to improve its development and utilization in liquid specialty food.

Effects of high-pressure homogenization on the physicochemical, foaming, and emulsifying properties of chickpea protein

In order to expand the utilization of chickpeas in various food products, this study investigated the effects of different homogenization pressures (0-150 MPa) and cycles (1-3) on the physicochemical, and functional properties of chickpea protein. After high-pressure homogenization (HPH) treatment, hydrophobic groups and sulfhydryl groups of chickpea protein was exposed which increased its surface hydrophobicity and decreased its total sulfhydryl content. SDS-PAGE analysis showed that the molecular weight of modified chickpea protein remained unchanged. The particle size and turbidity of chickpea protein significantly decreased with an increase in homogenization pressure and cycles. Furthermore, the solubility, foaming, and emulsifying properties of chickpea protein were all enhanced by HPH treatment. In addition, the emulsions prepared by modified chickpea protein showed better stability capacity due to its smaller particle size and higher zeta potential. Therefore, HPH might be an effective technique to improve the functional properties of chickpea protein.

Effects of Heat Treatment on the Structural and Functional Properties of Phaseolus vulgaris L. Protein

The paper presents the effect of heat treatment at 80 °C at different times (3, 5, 7, and 9 min) on the structural and functional properties of Phaseolus vulgaris L. protein (PVP, bean protein powder). Surface and structure properties of PVP after heat treatment were analyzed using a Fourier transform infrared spectrometer (FTIR), a fluorescence spectrophotometer, a visible light spectrophotometer, a laser particle size analyzer, and other equipment. The secondary structure and surface hydrophobicity (H0) of PVP changed significantly after heat treatment: the β-sheet content decreased from 25.32 ± 0.09% to 24.66 ± 0.09%, the random coil content increased from 23.91 ± 0.11% to 25.68 ± 0.08%, and the H0 rose by 28.96-64.99%. In addition, the functional properties of PVP after heat treatment were analyzed. After heat treatment, the emulsifying activity index (EAI) of PVP increased from 78.52 ± 2.01 m2/g to 98.21 ± 1.33 m2/g, the foaming ability (FA) improved from 87.31 ± 2.56% to 95.82 ± 2.96%, and the foam stability (FS) rose from 53.23 ± 1.72% to 58.71 ± 2.18%. Finally, the degree of hydrolysis (DH) of PVP after gastrointestinal simulated digestion in vitro was detected by the Ortho-Phthal (OPA) method. Heat treatment enhanced the DH of PVP from 62.34 ± 0.31% to 73.64 ± 0.53%. It was confirmed that heat treatment changed the structural properties of PVP and improved its foamability, emulsification, and digestibility. It provides ideas for improving PVP's potential and producing new foods with rich nutrition, multiple functions, and easy absorption.

Thoroughly review the recent progresses in improving O/W interfacial properties of proteins through various strategies

Along with the future food market developing world widely, the personalized nutrition and rational function food design are found to be urgently attracted. Oil in a water (O/W) emulsion system has an excellent ability to maintain nutraceuticals and thus plays a promising role in producing future functional foods. Understanding the interfacial related mechanisms involved are essential for improving the quality of food products. Protein can effectively reduce interfacial tension and stable immiscible phases. The interfacial properties of proteins directly affect the emulsion qualities, which have gradually become a prospective topic. This review will first briefly discuss the interfacial-related fundamental factors of proteins. Next, the paper thoroughly overviewed current physical and chemical strategies tailored to improving the interfacial and emulsion properties of proteins. To be summarized, a higher flexibility could allow protein to be more easily unfolded and adsorbed onto the interface but could also possibly form a softer interfacial film. Several physical strategies, such as thermal, ultrasound and especially high-pressure homogenization are well applied to improve the interfacial properties. The interfacial behavior is also altered by various green chemical strategies, such as pH adjustment, covalent modification, and low molecular weight (LMW) surfactant addition. These strategies upgraded emulsion properties by increasing adsorption load, accelerating diffusion and adsorption rate, associated with lowering interfacial tension, and promoting interfacial protein interactions. Future researches targeted at elucidating interfacial-bulk protein interactions, unraveling interfacial behavior through in silico tools, exploring connection between interfacial-industrial processing properties, and clarifying the interfacial-sensory-digestive relationships of O/W emulsions is needed to develop emulsion applications.

Current Research on the Extraction, Functional Properties, Interaction with Polyphenols, and Application Evaluation in Delivery Systems of Aquatic-Based Proteins

Globally, aquatic processing industries pay great attention to the production of aquatic proteins for the fulfillment of the nutritive requirements of human beings. Aquatic protein can replace terrestrial animal protein due to its high protein content, complete amino acids, unique flavor, high quality and nutritional value, and requirements of religious preferences. Due to the superior functional properties, an aquatic protein based delivery system has been proposed as a novel candidate for improving the absorption and bioavailability of bioactive substances, which might have potential applications in the food industry. This review outlines the extraction techniques for and functional properties of aquatic proteins, summarizes the potential modification technologies for interaction with polyphenols, and focuses on the application of aquatic-derived protein in delivery systems as well as their interaction with the gastrointestinal tract (GIT). The extraction techniques for aquatic proteins include water, salt, alkali/acid, enzyme, organic solvent, and ultrasound-assisted extraction. The quality and functionality of the aquatic proteins could be improved after modification with polyphenols via covalent or noncovalent interactions. Furthermore, some aquatic protein based delivery systems, such as emulsions, gels, films, and microcapsules, have been reported to enhance the absorption and bioavailability of bioactive substances by in vitro GIT, cell, and in vivo animal models. By promoting comprehensive understanding, this review is expected to provide a real-time reference for developing functional foods and potential food delivery systems based on aquatic-derived proteins.

Optimization of Pea Protein Isolate-Stabilized Oil-in-Water Ultra-Nanoemulsions by Response Surface Methodology and the Effect of Electrolytes on Optimized Nanoemulsions

Nanoemulsions are optically transparent and offer good stability, bioavailability, and control over the targeted delivery and release of lipophilic active components. In this study, pea protein isolate (PPI)-stabilized O/W nanoemulsions were evaluated using response surface methodology to obtain optimized ultra-nanoemulsions of Sauter mean diameter (D3,2) < 100 nm using a high-pressure homogenizer (HPH). Furthermore, the effect of food matrix electrolytes, i.e., the pH and ionic strength, on the emulsion (prepared at optimized conditions) was investigated. The results revealed that the droplet size distribution of emulsions was mainly influenced by the PPI concentration and the interaction of oil concentration and HPH pressure. Moreover, a non-significant increase in droplet size was observed when the nanoemulsions (having an initial D3,2 < 100 nm) were stored at 4 °C for 7 days. Based on the current experimental design, nanoemulsions with a droplet size < 100 nm can effectively be prepared with a high PPI concentration (6.35%), with less oil (1.95%), and at high HPH pressure (46.82 MPa). Such emulsions were capable of maintaining a droplet size below 100 nm even at ionic conditions of up to 400 mM NaCl and at acidic pH.

Effects of Glucose and Homogenization Treatment on the Quality of Liquid Whole Eggs

To investigate the effect of glucose on the protein structure, physicochemical and processing properties of liquid whole eggs (LWE) under homogenization, different concentrations of glucose (0.01, 0.02, 0.04, 0.08 g/mL) were added into LWE, followed by homogenizing at different pressures (5, 10, 20, 40 MPa), respectively. It was shown that the particle size and turbidity of LWE increased with the increase in glucose concentration while decreasing with the increase in homogenization pressure. The protein unfolding was increased at a low concentration of glucose combined with homogenization, indicating a 40.33 ± 5.57% and 165.72 ± 33.57% increase in the fluorescence intensity and surface hydrophobicity under the condition of 0.02 g/mL glucose at 20 MPa, respectively. Moreover, the remarkable increments in foaming capacity, emulsifying capacity, and gel hardness of 47.57 ± 5.1%, 66.79 ± 9.55%, and 52.11 ± 9.83% were recorded under the condition of 0.02 g/mL glucose at 20 MPa, 0.04 g/mL glucose at 20 MPa, and 0.02 g/mL glucose at 40 MPa, respectively. Reasonably, glucose could improve the processing properties of LWE under homogenization, and 0.02 g/mL-0.04 g/mL and 20-40 MPa were the optimal glucose concentration and homogenization pressure. This study could contribute to the production of high-performance and stable quality of LWE.

Comparison of the interfacial properties of native and refolded myofibrillar proteins subjected to pH-shifting

The emulsion abilities of pale, soft, exudative (PSE)-like chicken breast protein are unsatisfied, which are urgently needed to be ameliorated. This study evaluated the improvement of pH-shifting (11.0-, 11.5- and 12.0-7.0) on emulsion properties of the PSE-like chicken breast myofibrillar proteins (MPs) and the underlined structure-driven interfacial mechanism. It was found pH-shifting promoted the exposure of buried hydrophobic groups and free sulfhydryl groups, and changed secondary structures. Emulsions stabilized by refolded MPs exhibited more uniform and dispersed distributions with more adsorbed proteins at the interface. Electrophorogram showed both disulfide and non-disulfide covalent bonds were involved during interfacial protein-protein interaction. The results from circular dichroism and front-surface fluorescence spectroscopy revealed interfacial MPs were exposed to a more hydrophobic environment and increased β-sheets enhanced their molecular interactions. In addition, interfacial proteins after pH-shifting was less likely to be replaced by Tween 20.

Comparative Study on the Characterization of Myofibrillar Proteins from Tilapia, Golden Pompano and Skipjack Tuna

In this study, the physicochemical properties, functional properties and N-glycoproteome of tilapia myofibrillar protein (TMP), golden pompano myofibrillar protein (GPMP) and skipjack tuna myofibrillar protein (STMP) were assessed. The microstructures and protein compositions of the three MPs were similar. TMP and GPMP had higher solubility, sulfhydryl content and endogenous fluorescence intensity, lower surface hydrophobicity and β-sheet contents than STMP. The results showed that the protein structures of TMP and GPMP were more folded and stable. Due to its low solubility and high surface hydrophobicity, STMP had low emulsifying activity and high foaming activity. By N-glycoproteomics analysis, 23, 85 and 22 glycoproteins that contained 28, 129 and 35 N-glycosylation sites, were identified in TMP, GPMP and STMP, respectively. GPMP had more N-glycoproteins and N-glycosylation sites than STMP, which was possibly the reason for GPMP’s higher solubility and EAI. These results provide useful information for the effective utilization of various fish products.

Effects of ultrasound on the structural and emulsifying properties and interfacial properties of oxidized soybean protein aggregates

Oxidative attack leads to the oxidative aggregation and structural and functional feature weakening of soybean protein. We aimed to investigate the impact of ultrasonic treatment (UT) with different intensities on the structure, emulsifying features and interfacial features of oxidized soybean protein aggregates (OSPI). The results showed that oxidative treatment could disrupt the native soy protein (SPI) structure by promoting the formation of oxidized aggregates with β1-sheet structures through hydrophobic interactions. These changes led to a decrease in the solubility, emulsification ability and interfacial activity of soybean protein. After low-power ultrasound (100 W, 200 W) treatment, the relative contents of β1-sheets, β2-sheets, random coils, and disulfide bonds of the OSPI increased while the surface hydrophobicity, absolute ζ-potential value and free sulfhydryl content decreased. Moreover, protein aggregates with larger particle sizes and poor solubility were formed. The emulsions prepared using the OSPI showed bridging flocculation and decreased protein adsorption and interfacial tension. After applying medium-power ultrasound (300 W, 400 W, and 500 W) treatments, the OSPI solubility increased and particle size decreased. The α-helix and β-turn contents, surface hydrophobicity and absolute ζ-potential value increased, the structure unfolded, and the disulfide bond content decreased. These changes improved the emulsification activity and emulsion state of the OSPI and increased the protein adsorption capacity and interfacial tension of the emulsion. However, after a high-power ultrasound (600 W) treatment, the OSPI showed a tendency to reaggregate, which had a certain negative effect on the emulsification activity and interfacial activity. The results showed that UT at an appropriate power could depolymerize OSPI and improve the emulsification and interfacial activity of soybean protein.

Effect of high-intensity ultrasonic treatment on the emulsion of hemp seed oil stabilized with hemp seed protein

In this study, hemp seed oil (HSO) emulsions stabilized with hemp seed protein (HPI) were prepared and treated with high intensity ultrasonic (HIU). The effects of different treatment powers (0, 150, 300, 450, 600 W) on the properties, microstructure and stability of emulsions were investigated. HIU-treated emulsions showed improved emulsifying activity index and emulsifying stability index, reduced particle size, and increased absolute values of ζ-potential, with the extreme points of these indices occurring at a treatment power of 450 W. Here, the emulsion showed the best dispersion and the smallest particle size in fluorescence microscopy observation, with the highest adsorbed protein content (30.12%), and the highest tetrahydrocannabinol (THC) retention rate (87.64%). The best thermal and oxidative stability of the emulsions were obtained under HIU treatment with a power of 450 W. The D₄₃ and the peroxide values (POV) values after 30 d storage were the smallest at 985.74 ± 64.89 nm and 4.6 μmol/L, respectively. Therefore, 450 W was optimal HIU power to effectively improve the properties of HPI-stabilized HSO emulsion and promote the application of HSO and its derivatives in food processing production.

Comparison of oil-in-water emulsions prepared by ultrasound, high-pressure homogenization and high-speed homogenization

This study was designed to compare the properties of myofibrillar protein (MP) stabilized soybean oil-in-water emulsions fabricated by ultrasound-assisted emulsification (UAE), high-pressure homogenization (HPH) and high-speed homogenization (HSH). The emulsion properties, droplet characteristics, interfacial proteins, protein exposure extent, microrheological properties, multiple light scattering results, and 7 d storage stabilities of the three emulsions were specifically investigated. Our results indicate that UAE and HPH were better emulsification methods than HSH to obtain high-quality emulsions with higher emulsifying activity index (UAE 20.73 m²·g^-1, HPH 11.76 m²·g^-1 and HSH 6.80 m²·g^-1), whiteness (UAE 81.05, HPH 80.67 and HSH 74.09), viscosity coefficient (UAE 0.44 Pa·sⁿ, HPH 0.49 Pa·sⁿ and HSH 0.22 Pa·sⁿ), macroscopic viscosity index (UAE 2.31 nm^-2·s, HPH 0.38 nm^-2·s and HSH 0.34 nm^-2·s), and storage stability, especially for the UAE. Furthermore, UAE was a more efficient emulsification method than HPH to prepare the fine MP-soybean oil emulsion. The protein-coated oil droplets were observed in the three emulsions. The emulsion droplet size of the UAE-fabricated emulsion was the lowest (0.15 μm) while the interfacial protein concentration (93.37%) and the protein exposure extent were the highest among the three emulsions. During the 7 d storage, no separation was observed for the UAE-fabricated emulsion, while the emulsions fabricated by HPH and HSH were separated after storage for 5 d and 2 h. Therefore, this work suggests that UAE could be a better method than HPH and HSH to fabricate MP-soybean oil emulsion.

Effect of high-intensity ultrasound on the physicochemical properties, microstructure, and stability of soy protein isolate-pectin emulsion

In this study, an emulsion stabilized by soy protein isolate (SPI)-pectin (PC) complexes was prepared to investigate the effects of high-intensity ultrasound (HIU) treatment (150-600 W) on the physicochemical properties, microstructure, and stability of emulsions. The results found that the emulsion treated at 450 W showed the best emulsion stability index (ESI) (25.18 ± 1.24 min), the lowest particle size (559.82 ± 3.17 nm), the largest ζ-potential absolute value (16.39 ± 0.18 mV), and the highest adsorbed protein content (27.31%). Confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) revealed that the emulsion aggregation was significantly improved by ultrasound treatment, and the average roughness value (Rq) was the smallest (10.3 nm) at 450 W. Additionally, HIU treatment reduced the interfacial tension and apparent viscosity of the emulsion. Thermal stability was best when the emulsion was treated at 450 W, D43 was minimal (907.95 ± 31.72 nm), and emulsion separation also improved. Consequently, the creaming index (CI) was significantly decreased compared to the untreated sample, indicating that the storage stability of the emulsion was enhanced.

Effect of high pressure homogenization on aggregation, conformation, and interfacial properties of bighead carp myofibrillar protein

Fish myofibrillar protein is underutilized due to the formation of insoluble aggregates in low salt media. High pressure homogenization (HPH) at 20, 40, and 60 MPa for four passes was applied on bighead carp myofibrillar protein in order to modify its structure and interfacial properties. Changes in aggregation, conformation, solubility, emulsifying and foaming properties of myofibrillar protein were investigated. The aggregates of myofibrillar protein were obviously disrupted by HPH treatment. The size of myofibrillar protein aggregates became smaller and more uniform as the treating pressure increased, accompanied by notable decreases of cross-sectional height and Rq value in AFM image. Furthermore, the conformation of HPH-treated myofibrillar protein was unfolded into a flexible and open structure. α-helix and β-sheet were converted into β-turn and random coil. Surface hydrophobicity and zeta potential were strengthened, along with the exposure of sulfhydryl groups onto molecule surface. On the other hand, solubility, emulsifying activity index (EAI) and foaming capacity (FC) of HPH-treated myofibrillar protein were markedly enhanced with the increasing pressure. Especially after HPH treatment at 60 MPa, myofibrillar protein was almost dissolved in low salt media (solubility 91.86%) with 4.92 fold for EAI and 3.52 fold for FC. But there was little variation in emulsifying and foaming stabilities. These results suggested that HPH treatment has interesting potential to induce the dissociation and unfolding of myofibrillar protein in low salt media, therefore improving its interfacial properties. PRACTICAL APPLICATION: Carp myofibrillar protein was treated by high pressure homogenization (HPH). Aggregates of myofibrillar protein were disrupted into smaller size form. Conformation of myofibrillar protein was unfolded into open and loose structure. Emulsifying and foaming capacities of myofibrillar protein were improved. HPH treatment modified the structure and interfacial properties of myofibrillar protein.

High-intensity ultrasound improves the physical stability of myofibrillar protein emulsion at low ionic strength by destroying and suppressing myosin molecular assembly

The specific molecular behavior of myofibrillar proteins (MPs) in low-salt media limits the development of muscle protein-based emulsions. This study aimed to evaluate the potential of high-intensity ultrasound (HIU; 150, 300, 450, and 600 W) to improve the physical stability of MP emulsion at low ionic strength and decipher the underlying mechanism. According to the physical stability analysis, HIU pretreatment, especially at 450 W power, significantly improved the physical stability of MP emulsions, as evidenced by the reduced particle size, enhanced inter-droplet interactions, and increased uniformity of the droplet size distribution (p < 0.05). The results of interfacial protein composition, Fourier transform infrared spectroscopy analysis, and microscopic morphology observation of the aqueous MP suspension suggested that HIU induced the depolymerization of filamentous myosin polymers and inhibited the subsequent self-assembly behavior. These effects may facilitate protein adsorption and molecular rearrangement at the oil-water interface, forming a complete interfacial layer and, thus, droplet stabilization. Confocal laser scanning microscopy observations further confirmed these results. In conclusion, these findings provide direct evidence for the role of HIU in improving the physical stability of MP emulsions at low ionic strength.

Effect of Interfacial Ionic Layers on the Food-Grade O/W Emulsion Physical Stability and Astaxanthin Retention during Spray-Drying

The utilization of astaxanthin in food processing is considered to be narrow because of its substandard solubility in aqueous matrices and the instability of chemical compounds during the processing of food and the instability of chemical compounds during the processing of food. The investigation sought to evaluate multilayer emulsions stabilized by ionic interfacial layers of lupin protein isolate (LPI), ι-carrageenan (CA), and chitosan (CHI) on the physical stability of the emulsion as well as the retention of astaxanthin during the spray drying process. Primary emulsion (Pr-E) was prepared by adding LPI on oil droplet surfaces containing astaxanthin. The homogenization pressure and cycles to obtain the Pr-E were investigated. The secondary emulsion (Se-E) and tertiary emulsion (Te-E) were elaborated by mixing CA/Pr-E and CHI/Se-E, respectively. Emulsion stability was assessed under different environmental stresses (pH and NaCl). Astaxanthin retention of emulsions was determined immediately after finishing the spray-drying process. The results showed that Pr-E was stabilized with 1.0% (w/v) of LPI at 50 MPa and three cycles. Se-E and Te-E were obtained with CA/Pr-E and Se-E/CHI of 70/30 and 50/50% (w/w), respectively. The Se-E was the most stable compared to the Pr-E and Te-E when subjected to different pHs; nevertheless, once the NaCl concentration rose, no variations in the ζ-potential of all emulsions studied or destabilization were observed. The Se-E and Te-E derived provided higher astaxanthin retention (>95%) during the spray-drying process compared to Pr-E (around 88%). The results indicated that these astaxanthin multilayer emulsions show considerable potential as a functional ingredient in food products.