Edible high internal phase Pickering emulsion with double-emulsion morphology

(E,E)-2,4-decadienal improved the stability of gelatin emulsion manufactured by low-energy stirring emulsification

The study investigated the impact of varying concentrations of (E,E)-2,4-decadienal (DDE; 0, 9, 27, 54, and 81 μg/mL) on the stability of gelatin emulsions prepared via a low-energy stirring emulsification method, which relies solely on simple mechanical stirring. As the concentration of DDE increased, the emulsifying activity index, emulsion stability index, and viscosity of emulsions first increased significantly (P < 0.05) and then decreased significantly (P < 0.05), indicating that the emulsion stability first improved and then decreased. The highest emulsion stability was observed at a DDE concentration of 27 μg/mL, as evidenced by the highest adsorbed protein content (84.78 %) and the maximum absolute zeta potential value (14.46 mV). These findings suggested that DDE, in combination with low-energy stirring emulsification, improved the stability of gelatin emulsions. The results of protein structure indicated that DDE enhanced the depolymerization of gelatin by disrupting hydrophobic interactions within gelatin aggregates, leading to the exposure of hydrophobic groups on the protein surface. This exposure enhanced the adsorption of gelatin at the oil-water interface, thereby improving the emulsion stability through increased steric hindrance at the interface. Furthermore, DDE reduced the surface tension of soybean oil, contributing to further stabilization of the interface.

Insights into the co-loading capacity of Pickering W/O/W systems for different types of soy protein isolated-pectin particles: Affected by biopolymer complexation sequence

This study developed a Pickering water-in-oil-in-water (W/O/W) emulsion (PWE) for co-delivering vitamins C and E using soy protein isolate (SPI) and pectin (PEC) particles as emulsifiers. Two particle types were synthesized via distinct nucleation mechanisms: (1) heat-treated SPI-PEC complexes formed at pH 4.0 and (2) SPI-PEC complexes formed through pH regulation followed by heating. Type 2 particles exhibited smaller sizes, more regular spherical structures, and stronger intermolecular interactions than type 1. Higher PEC concentrations further enhanced particle compactness. Additionally, type 2 particles demonstrated superior interfacial protein adsorption, forming stable and elastic interfacial membranes in the PWE. As a result, PWEs stabilized with type 2 particles achieved controlled release and high bioaccessibility of vitamins C (90.18 %) and E (85.24 %). These findings provide insights into the development of heat-induced biopolymer particles as effective PWE stabilizers.

Interfacial Dynamics and Environmental Responsiveness of Double Emulsions Stabilized by Zein Particles and Surfactant Using Microfluidic Techniques

Elucidating the stability dynamics of double emulsions is essential for advancing their sustainable applications in the food industry. This study utilizes microfluidic techniques to investigate the interactions between interfacial components, Tween 80 (Tw80) and zein particles (ZPs), in double emulsions. Our results indicate that the type and concentration of stabilizing agents are critical to emulsion stability with environmental factors further influencing this balance. Specifically, emulsions stabilized by Tw80 primarily exhibited instability through the expulsion of internal droplets (Pe). In contrast, emulsions with ZP concentrations below 0.5% experienced instability due to the coalescence of oil droplets (Po), while those with ZPs concentrations above 0.5% showed instability through Pe, attributed to decreased interfacial relaxation and elasticity. Environmental factors, such as pH, NaCl, and alginate, significantly modulated this stability. Interfacial rheological analyses demonstrated a strong correlation between the emulsion stability and the viscoelastic properties of interfacial films. Lissajous plots revealed that alginate enhanced the elasticity of interface films formed by Tw80 and ZPs, thereby improving the emulsion stability. Additionally, environmental modifications, such as NaCl introduction or pH adjustments, weakened the Tw80 interface strength but accelerated ZP adsorption, ultimately increasing deformation resistance and reducing Pe. This study underscores the potential of microfluidic technologies in advancing colloid and interface science, providing a foundation for the innovative design and precise manipulation of double emulsions.

Physical Cross-Linking of Cellulose Nanofibrils with Zein Particles as an Eco-Friendly Detergent

Pickering particles can self-assemble to form a rigid barrier film at the oil-water interface, effectively inhibiting droplet aggregation and stabilizing the emulsion. This essay explores the potential of Zein/TOCNF (TEMPO-oxidized cellulose nanofiber) complex aqueous dispersion as an environmentally friendly, nontoxic, versatile, and inexpensive cleaning agent based on the Pickering effect. The Zein/TOCNF complex exhibited an improvement in its surface hydrophobicity compared to that of pure TOCNF, so that it could be used as Pickering emulsion stabilizers. The Zein/TOCNF complex has better washing ability than the washing powder for the removal of the dirt from the cotton cloth, the glass, the stainless steel, the ceramic, and the plastic sheet. In addition, residual amounts of Zein/TOCNF complexes on the fabric were insignificant. Moreover, research results have shown that Zein/TOCNF complexes are feasible as a secure, cost-effective, and sustainable alternative to commercial washing cleaners.

Formation of self-assembled fibril aggregates of trypsin-controllably hydrolyzed soy protein and its regulation on stability of high internal phase Pickering emulsions

The mechanisms of trypsin hydrolysis time on the structure of soy protein hydrolysate fibril aggregates (SPHFAs) and the stability of SPHFAs-high internal phase Pickering emulsions (HIPPEs) were investigated. SPHFAs were prepared using soy protein hydrolysate (SPH) with different trypsin hydrolysis time (0 min-120 min) to stabilize SPHFAs-HIPPEs. The results showed that moderate trypsin hydrolysis (30 min, hydrolysis degree of 2.31 %) induced SPH unfolding and increased the surface hydrophobicity of SPH, thereby promoting the formation of flexible SPHFAs with maximal thioflavin T intensity and ζ-potential. Moreover, moderate trypsin hydrolysis improved the viscoelasticity of SPHFAs-HIPPEs, and SPHFAs-HIPPEs remained stable after storage at 25 °C for 80 d and heating at 100 °C for 1 h. Excessive trypsin hydrolysis (> 30 min) decreased the stability of SPHFAs-HIPPEs. In conclusion, moderate trypsin hydrolysis promoted the formation of flexible SPHFAs with high surface charge by inducing SPH unfolding, thereby promoting the stability of SPHFAs-HIPPEs.

Chitosan-zein-icariin complexes modulate double emulsion phase transitions to potentiate absorption efficiency

This study developed a chitosan-zein-icariin ternary complex through reversed-phase precipitation to stabilize double emulsions using one-step emulsification method. Results indicated that icariin and chitosan-zein formed spherical microstructures via the rearrangement of hydrogen bonding networks and hydrophobic interactions. All complexes exhibited pale-yellow color and demonstrated single and uniform size distribution. The thermal stability and interfacial contact angle of the complexes significantly decreased with the incorporation of icariin. The prepared double emulsion microstructures displayed multi-chambered configurations due to polarity differences, solidifying during cold storage as a result of phase shifts in coconut oil, which led to an increased storage modulus. While the double emulsion microstructure showed enhanced storage stability, droplet size increased markedly when subjected to NaCl and temperature variations. Following in-vitro digestion, the double emulsion microstructure disintegrated; average particle size decreased, resulting in the release of icariin from the ternary complex during intestinal phases, thereby enhancing bioaccessibility. Furthermore, it was observed that icariin within the ternary complex influenced absorption efficacy based on its concentration levels, as evidenced by Caco-2 cell studies, though this effect was greater than that observed for the zein-icariin binary complex. The results of this study provide a theoretical foundation for efficient delivery systems involving hydrophobic multivariate complexes.

From theoretical aspects to practical food Pickering emulsions: Formation, stabilization, and complexities linked to the use of colloidal food particles

We noticed that in literature, the term Pickering emulsion (PE) is used as soon as ingredients contain particles, and in this review, we ask ourselves if that is done rightfully so. The basic behavior taking place in particle-stabilized emulsions leads to the conclusion that the desorption energy of particles is generally high making particles highly suited to physically stabilize emulsions. Exceptions are particles with extreme contact angles or systems with very low interfacial tension. Particles used in food and biobased applications are soft, can deform when adsorbed, and most probably have molecules extending into both phases thus increasing desorption energy. Besides, surface-active components will be present either in the ingredients or generated by the emulsification process used, which will reduce the energy of desorption, either by reduced interfacial tension, or changes in the contact angle. In this paper, we describe the relative relevance of these aspects, and how to distinguish them in practice. Practical food emulsions may derive part of their stability from the presence of particles, but most likely have mixed interfaces, and are thus not PEs. Especially when small particles are used to stabilize (sub)micrometer droplets, emulsions may become unstable upon receiving a heat treatment. Stability can be enhanced by connecting the particles or creating network that spans the product, albeit this goes beyond classical Pickering stabilization. Through the architecture of PEs, special functionalities can be created, such as reduction of lipid oxidation, and controlled release features.

Water-in-oil-in-water (W/O/W) emulsions with antioxidant and bacteriostatic capabilities: A preliminary exploration of food preservation films

The development of stable water-in-oil-in-water (W/O/W) emulsions for edible preservation coatings and films, utilizing their properties, deserves scientific attention. In this study, oregano essential oil and D‑sodium erythorbate were simultaneously loaded into W/O/W emulsions, and the homogenization conditions of the W/O/W emulsions were optimized. The structure and interactions of gum Arabic (GA) and whey protein isolate (WPI) as the outer phase were analyzed. Stable W1/O/W2 emulsions with excellent antimicrobial and antioxidant activities could be produced under the conditions of GA: WPI at 1:1 and W2: W1/O at 5:5. The diphenyl-1-picrylhydrazyl radical (DPPH) and 2,2'-azinobis-(3-ethylbenzenthiazoline-6-sulphonic acid) (ABTS) radical scavenging rates were 86.35 % and 89.35 %, and the inhibition zone diameters for S. aureus and E. coli were 14.03 ± 0.42 mm and 14.17 ± 0.70 mm, respectively. Finally, the W1/O/W2 emulsions were successfully applied to prepare chitosan-based films. This study has the potential to promote the application of W/O/W emulsions in food preservation, emphasizing the need for advancements for real-world adaptability.

Pickering emulsions stabilized by prolamin-based proteins as innovative carriers of bioactive compounds

Pickering emulsions (PEs) can be used as efficient carriers for encapsulation and controlled release of different bioactive compounds. Recent research has revealed the potential of prolamins in development of nanoparticle- and emulsion-based carriers which can improve the stability and bioavailability of bioactive compounds. Prolamin-based particles have been effectively used as stabilizers of various PEs including single PEs, high internal phase PEs, multiple PEs, novel triphasic PEs, and PE gels due to their tunable self-assembly behaviors. Prolamin particles can be fabricated via different techniques including anti-solvent precipitation, dissolution followed by pH adjustment, heating, and ion induced aggregation. Particles fabricated from prolamins alone or in combination with other hydrocolloids or polyphenols have also been used for stabilization of different PEs which were shown to be effective carriers for food bioactives, providing improved stability and functionality. This article covers the recent advances in various PEs stabilized by prolamin particles as innovative carriers for bioactive ingredients. Strategies applied for fabrication of prolamin particles and prolamin-based carriers are discussed. Emerging techno-functional applications of prolamin-based PEs and possible challenges are also highlighted.

High internal phase double emulsions stabilized by modified pea protein-alginate complexes: Application for co-encapsulation of riboflavin and β-carotene

The application of many hydrophilic and hydrophobic nutraceuticals is limited by their poor solubility, chemical stability, and/or bioaccessibility. In this study, a novel Pickering high internal phase double emulsion co-stabilized by modified pea protein isolate (PPI) and sodium alginate (SA) was developed for the co-encapsulation of model hydrophilic (riboflavin) and hydrophobic (β-carotene) nutraceuticals. Initially, the effect of emulsifier type in the external water phase on emulsion formation and stability was examined, including commercial PPI (C-PPI), C-PPI-SA complex, homogenized and ultrasonicated PPI (HU-PPI), and HU-PPI-SA complex. The encapsulation and protective effects of these double emulsions on hydrophilic riboflavin and hydrophobic β-carotene were then evaluated. The results demonstrated that the thermal and storage stabilities of the double emulsion formulated from HU-PPI-SA were high, which was attributed to the formation of a thick biopolymer coating around the oil droplets, as well as thickening of the aqueous phase. Encapsulation significantly improved the photostability of the two nutraceuticals. The double emulsion formulated from HU-PPI-SA significantly improved the in vitro bioaccessibility of β-carotene, which was mainly attributed to inhibition of its chemical degradation under simulated acidic gastric conditions. The novel delivery system may therefore be used for the development of functional foods containing multiple nutraceuticals.

Multiple Pickering emulsions stabilized by food-grade particles as innovative delivery systems for bioactive compounds

The most common carrier for encapsulation of bioactive components is still simple emulsion. Recently, bio-based novel emulsion systems such as multiple emulsions (MEs) and Pickering emulsions (PEs) have been introduced as innovative colloidal delivery systems for encapsulation and controlled release of bioactive compounds. Multiple PEs (MPEs), which carries both benefit of MEs and PEs could be fabricated by relatively scalable and simple operations. In comparison with costly synthetic surfactants and inorganic particles which are widely used for stabilization of both MEs and PEs, MPEs stabilized by food-grade particles, while having health-promoting aspects, are able to host the "clean label" and "green label" attributes. Nevertheless, in achieving qualified techno-functional attributes and encapsulation properties, the selection of suitable materials is a crucial step in the construction of such complex systems. Current review takes a cue from both MEs and PEs emulsification techniques to grant a robust background for designing various MPEs. Herein, various fabrication methods of MEs and PEs are described comprehensively in a physical viewpoint in order to find key conception of successful formulation of MPEs. This review also highlights the link between the underlying aspects and exemplified specimens of evidence which grant insights into the rational design of MPEs through food-based ingredients to introduces MPEs as novel colloidal/functional materials. Their utilization for encapsulation of bioactive compounds is discussed as well. In the last part, instability behavior of MPEs under various conditions will be discussed. In sum, this review aims to gain researchers who work with food-based components, basics of innovative design of MPEs.

Pea protein/carboxymethyl cellulose complexes prepared using a pH cycle strategy as stabilizers of high internal phase emulsions for 3D printing

The development of food-grade high internal phase emulsions (HIPEs) for 3D printing and the replacement of animal fats have attracted considerable attention. In this study, in order to improve the rheological properties and stability of pea protein to prepare HIPE, pea protein/carboxymethyl cellulose (pH-PP/CMC) was prepared and subjected to pH cycle treatment to produce HIPEs. The results showed that pH cycle treatment and CMC significantly reduced the droplet size of HIPEs (from 143.33 to 12.10 μm). At higher CMC concentrations, the interfacial tension of the PP solution decreased from 12.84 to 11.71 mN/m without pH cycle treatment and to 10.79 mN/m with pH cycle treatment. The HIPEs with higher CMC concentrations subjected to pH cycle treatment showed shear thinning behavior and higher viscoelasticity and recovered their solid-like properties after being subjected to 50 % strain, indicating that they could be used for 3D printing. The 3D printing results showed that the pH-PP/CMC HIPE with 0.3 % CMC had the finest structure. Our work provides new insights into developing food-grade HIPEs and facilitating their use in 3D printing inks as nutrient delivery systems and animal fat substitutes.

Proteinaceous Microsphere-Based Water-in-Oil Pickering Emulsions for Preservation of Chlorella Cells

Microalgae are highly regarded as ideal materials for the creation of liquid biofuels and have substantial potential for growth and utilization. However, traditional storage and culture methods for microalgae are plagued by challenges such as uncontrolled growth, bacterial contamination, and self-shading among algae. These issues severely impede the photosynthetic process and the efficient extraction of biomass energy. This study tackles these problems by utilizing magnetic hydrophobic protein particles to stabilize water-in-oil Pickering emulsions. This allows for the micro-compartment storage and magnetic transfer of algae. Additionally, the successful encapsulation of Chlorella cells in high-internal-phase water-in-oil Pickering emulsions effectively mitigates the settling problem of Chlorella cells in the liquid phase, thereby enabling the potential use of Pickering emulsions for the confined cultivation of microalgae.

Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

Temperature-Responsive Pickering Double Emulsions Stabilized by Binary Microgels

Microgels are excellent emulsifiers that can self-assemble to reduce interfacial tension and form a steric barrier at an oil-water interface. Herein, we report a two-step emulsification approach to prepare oil-in-water-in-oil (O/W/O) Pickering double emulsions through the dispersion of microgels in two immiscible phases. The stabilization mechanism depends on the uneven distribution and adsorption of hydrophilic water-swollen microgels and hydrophobic octanol-swollen microgels on either outer water droplets or inner oil droplets. Our results reveal that binary microgels outperformed single microgels in terms of interfacial tension reduction and emulsion stabilization. Notably, the binary microgel-stabilized Pickering double emulsions show excellent temperature responsiveness owing to the intrinsic thermal sensitivity of microgels. Consequently, the selective and rapid release of encapsulated substances in different phases can be achieved through the adjustment of the ambient temperature.

Biofunctionalization of natural extracts, trends in biological activity and kinetic release

The health benefits provided by plant matrices is due to the presence of certain compounds that, in studies carried out in vitro and in vivo, have shown to have biological activity in certain conditions, not only as a natural treatment against various conditions, but also for the quality of preventing chronic diseases, these compounds, already identified and studied, they can increase their biological function by undergoing structural chemical modifications or by being incorporated into polymer matrices that allow, in the first instance, to protect said compound and increase its bioaccessibility, as well as to preserve or increase the biological effects. Although the stabilization of compounds is an important aspect, it is also the study of the kinetic parameters of the system that contains them, since, due to these studies, the potential application to these systems can be designated. In this review we will address some of the work focused on obtaining compounds with biological activity from plant sources, the functionalization of extracts through double emulsions and nanoemulsions, as well as their toxicity and finally the pharmacokinetic aspects of entrapment systems.

Biopolymer-based pickering high internal phase emulsions: Intrinsic composition of matrix components, fundamental characteristics and perspective

Pickering HIPEs have received tremendous attention in recent years due to their superior stability and unique solid-like and rheological properties. Biopolymer-based colloidal particles derived from proteins, polysaccharides and polyphenols have been demonstrated to be safety stabilizers for the construction of Pickering HIPEs, which can meet the demands of consumers for "all-natural" products and provide "clean-label" foods. Furthermore, the functionality of these biopolymers can be further extended by forming composite, conjugated and multi-component colloidal particles, which can be used to modulate the properties of the interfacial layer, thereby adjusting the performance and stability of Pickering HIPEs. In this review, the factors affecting the interfacial behavior and adsorption characteristics of colloidal particles are discussed. The intrinsic composition of matrix components and fundamental characteristics of Pickering HIPEs are emphatically summarized, and the emerging applications of Pickering HIPEs in the food industry are reviewed. Inspired by these findings, future perspectives concerning this field are also put forward, including (1) the exploration of the interactions between biopolymers used to produce Pickering HIPEs and target food ingredients, and the influence of the added biopolymers on the flavor and mouthfeel of the products, (2) the investigation of the digestion properties of Pickering HIPEs under oral administration, and (3) the fabrication of stimulus-responsive or transparent Pickering HIPEs. This review will give a reference for exploring more natural biopolymers for Pickering HIPEs application development.

Recent Advances in Pickering Double Emulsions and Potential Applications in Functional Foods: A Perspective Paper

Double emulsions are complex emulsion systems with a wide range of applications across different fields, such as pharmaceutics, food and beverage, materials sciences, personal care, and dietary supplements. Conventionally, surfactants are required for the stabilization of double emulsions. However, due to the emerging need for more robust emulsion systems and the growing trends for biocompatible and biodegradable materials, Pickering double emulsions have attracted increasing interest. In comparison to double emulsions stabilized solely by surfactants, Pickering double emulsions possess enhanced stability due to the irreversible adsorption of colloidal particles at the oil/water interface, while adopting desired environmental-friendly properties. Such advantages have made Pickering double emulsions rigid templates for the preparation of various hierarchical structures and as potential encapsulation systems for the delivery of bioactive compounds. This article aims to provide an evaluation of the recent advances in Pickering double emulsions, with a special focus on the colloidal particles employed and the corresponding stabilization strategies. Emphasis is then devoted to the applications of Pickering double emulsions, from encapsulation and co-encapsulation of a wide range of active compounds to templates for the fabrication of hierarchical structures. The tailorable properties and the proposed applications of such hierarchical structures are also discussed. It is hoped that this perspective paper will serve as a useful reference on Pickering double emulsions and will provide insights toward future studies in the fabrication and applications of Pickering double emulsions.

Protein-Based High Internal Phase Pickering Emulsions: A Review of Their Fabrication, Composition and Future Perspectives in the Food Industry

Protein-based high internal phase Pickering emulsions (HIPEs) are emulsions using protein particles as a stabilizer in which the volume fraction of the dispersed phase exceeds 74%. Stabilizers are irreversibly adsorbed at the interface of the oil phase and water phase to maintain the droplet structure. Protein-based HIPEs have shown great potential for a variety of fields, including foods, due to the wide range of materials, simple preparation, and good biocompatibility. This review introduces the preparation routes of protein-based HIPEs and summarizes and classifies the preparation methods of protein stabilizers according to their formation mechanism. Further outlined are the types and properties of protein stabilizers used in the present studies, the composition of the oil phase, the encapsulating substances, and the properties of the constituted protein-based HIPEs. Finally, future development of protein-based HIPEs was explored, such as the development of protein-based stabilizers, the improvement of emulsification technology, and the quality control of stabilizers and protein-based HIPEs.

W/o/w multiple emulsions: A novel trend in functional ice cream preparations?

•

The possible applications of w/o/w multiple emulsions (MEs) in ice creams are described.

•

W/o/w MEs enable the encapsulation of sensitive compounds.

•

Fat content is reduced using w/o/w MEs without losing the creaminess of the final products.

•

Ice cream is a very suitable matrix for application of Pickering emulsions.

Ice cream is a popular product worldwide. Unfortunatelly, it contains a significant amount of fat. In this review, promising strategies for the use of w/o/w multiple emulsion structures in creams are assessed. W/o/w multiple emulsions (MEs) enable reduction the fat without losing the creamy taste and mouthfeel and also encapsulation of sensitive compounds. The encouraging application and formation of MEs in ice cream mixtures is supported by the use of natural food ingredients, such as fiber, which helps to stabilize the whole system and improves nutritional value. The future trends may be focused on the target stabilizations using Pickering paticles (PPs). The possible advantages, manufacture, evaluation methods, and predicted future prospects of MEs in ice creams are discussed.

Pickering Emulsions Stabilized by Binary Mixtures of Colloidal Particles: Synergies between Contrasting Properties

Pickering emulsions that are stabilized by colloidal particles have attracted substantial research attention because of their potential applications in various industries. Previously, single colloidal particles have usually been used to fabricate Pickering emulsions and to investigate the stabilization mechanism. However, surface modification of the colloidal stabilizer is normally required to adjust the particle wettability, which often involves chemical modification, the adsorption of a surfactant or polymer, and the addition of an electrolyte. Such a modification is expensive, time-consuming, and thus only partially effective. In this Perspective, we describe an alternative approach that uses binary mixtures of particles as stabilizers and could be an effective solution to the above-described problems with Pickering emulsions. We introduce various types of Pickering emulsions stabilized by binary mixtures of particles with different functional groups, opposite charges, or opposite wettabilities (i.e., they are hydrophilic or hydrophobic). Examples of stabilizing mechanisms are discussed, showing that compared with emulsions stabilized by single colloidal particles, emulsions stabilized by binary mixtures of particles are generated via simpler particle-pretreatment processes and have higher stability and customizable properties and thus can enable the exploration of the next generation of Pickering emulsions.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Fabrication and Characterization of W/O/W Emulgels by Sipunculus nudus Salt-Soluble Proteins: Co-Encapsulation of Vitamin C and β-Carotene

W/O/W emulsions can be used to encapsulate both hydrophobic and hydrophilic bioactive as nutritional products. However, studies on protein stabilized gel-like W/O/W emulsions have rarely been reported, compared to the liquid state multiple emulsions. The purpose of this study was to investigate the effect of different oil–water ratios on the stability of W/O/W emulgels fabricated with salt-soluble proteins (SSPs) of Sipunculus nudus. The physical stability, structural characteristics, rheological properties, and encapsulation stability of vitamin C and β-carotene of double emulgels were investigated. The addition of W/O primary emulsion was determined to be 10% after the characterization of the morphology of double emulsion. The results of microstructure and rheological properties showed that the stability of W/O/W emulgels increased with the increasing concentration of SSPs. Additionally, the encapsulation efficiency of vitamin C and β-carotene were more than 87%, and 99%, respectively, and still could maintain around 50% retention of the antioxidant capacity after storage for 28 days at 4 °C. The aforementioned findings demonstrate that stable W/O/W emulgels are a viable option for active ingredients with an improvement in shelf stability and protection of functional activity.

Encapsulated Microstructures of Beneficial Functional Lipids and Their Applications in Foods and Biomedicines

Beneficial functional lipids are essential nutrients for the growth and development of humans and animals, which nevertheless possess poor chemical stability because of heat/light-sensitivity. Various encapsulation technologies have been developed to protect these nutrients against adverse factors. Different microstructures are exhibited through different encapsulation methods, which influence the encapsulation efficiency and release behavior at the same time. This review summarizes the effects of preparation methods and process parameters on the microstructures of capsules at first. The mechanisms of the different microstructures on encapsulation efficiency and controlled release behavior of core materials are analyzed. Next, a comprehensive overview on the beneficial functional lipids capsules in the latest food and biomedicine applications are provided as well as the matching relationship between the microstructures of the capsules and applications are discussed. Finally, the remaining challenges and future possible directions that have potential interest are outlined. The purpose of this review is to convey the construction of beneficial functional lipids capsules and the function mechanism, a critical analysis on its current status and challenges, and opinions on its future development. This review is believed to promote communication among the food, pharmacy, agronomy, engineering, and nutrition industries.

"Foam Marble" Stabilized with One Type of Polymer Particle

There has been increasing interest in colloidal particles adsorbed at the air-water interface, which lead to stabilization of aqueous foams and liquid marbles. The wettability of the particles at the interface is known to play an important role in determining the type of air/water dispersed system. Foams are preferably formed using relatively hydrophilic particles, and liquid marbles tend to be formed using relatively hydrophobic particles. In this study, submicrometer-sized polystyrene particles carrying poly(N,N-diethylaminoethyl methacrylate) hairs (PDEA-PS particles), which are synthesized by dispersion polymerization, are demonstrated to work as a particulate stabilizer for both aqueous foams and liquid marbles. A key point for the hydrophilic PDEA-PS particles to stabilize both aqueous foams and liquid marbles, which have been generally stabilized with hydrophilic and hydrophobic particles, respectively, is the wetting mode of the particles with respect to water. The flocculates of PDEA-PS particles adsorb to the air-water interface from the aqueous phase to stabilize foam in a Wenzel mode, and the dried PDEA-PS particles adsorb to the interface as aggregates from the air phase to stabilize liquid marbles in a metastable Cassie-Baxter mode. On the basis of the difference in the wetting mode, stabilization of an air-in-water-in-air multiple gas-liquid dispersed system, named "foam marble", is realized. After the evaporation of water from the foam marble, a porous sphere is successfully obtained with pore sizes of a few tens of micrometers (reflecting the bubble sizes) and a few tens of nanometers (reflecting the gap sizes among the PDEA-PS particles).

The Potential Application of Pickering Multiple Emulsions in Food

Emulsions stabilized by adsorbed particles—Pickering particles (PPs) instead of surfactants and emulsifiers are called Pickering emulsions. Here, we review the possible uses of Pickering multiple emulsions (PMEs) in the food industry. Food-grade PMEs are very complex systems with high potential for application in food technology. They can be prepared by traditional two-step emulsification processes but also using complex techniques, e.g., microfluidic devices. Compared to those stabilized with an emulsifier, PMEs provide more benefits such as lower susceptibility to coalescence, possible encapsulation of functional compounds in PMEs or even PPs with controlled release, etc. Additionally, the PPs can be made from food-grade by-products. Naturally, w/o/w emulsions in the Pickering form can also provide benefits such as fat reduction by partial replacement of fat phase with internal water phase and encapsulation of sensitive compounds in the internal water phase. A possible advanced type of PMEs may be stabilized by Janus particles, which can change their physicochemical properties and control properties of the whole emulsion systems. These emulsions have big potential as biosensors. In this paper, recent advances in the application of PPs in food emulsions are highlighted with emphasis on the potential application in food-grade PMEs.

Chitosan/zein films incorporated with essential oil nanoparticles and nanoemulsions: Similarities and differences

The purpose of this study was to prepare chitosan/zein (CS/Zein) edible films reinforced with Mosla chinensis essential oils (EOs) nanoemulsions (NEs) and nanoparticles (NPs) in order to compare their properties. NEs and NPs containing EOs could be used to fabricate films with functional properties, and the films were prepared using a casting method. The influence of EO concentration and mixing methods on the physical, mechanical, and functional properties of the films was investigated. The results indicated that the films formulated with EO NEs generated favorable fundamental and functional characteristics with excellent mechanical properties, moisture barrier capacity, and significant antioxidant and antibacterial activity. In addition, the use of NEs-based films improved the release of bioactive compounds, and the mechanism of EO release was found to follow a first order model. In summary, EO NEs were more effective in preserving the fundamental and functional properties of CS/Zein nanocomposite edible films than NP-based films. These differences may reflect different forms and methods of dispersing EOs in NEs and NPs. This study demonstrated that NEs reinforced films could be used to enhance the effectiveness of EOs in food products and develop new strategies for their delivery and application.

Development and characterization of medium and high internal phase novel multiple Pickering emulsions stabilized by hordein nanoparticles

Medium and high internal phase W₁/O/W₂ multiple Pickering emulsions (MPEs) were fabricated by physically-modified hordein nanoparticles. A triphasic system was developed at dispersed phase volume fraction (Φ) of 0.5 with an overrun value of ∼40%. No overrun was detected in high internal phase MPEs (Φ 0.8). Optical and confocal laser scanning microscopy confirmed the formation of MPEs. Monomodal droplet size distribution with a mean diameter of 32.90 and 21.48 μm was observed for MPEs at Φ 0.5 and Φ 0.8, respectively. Static multiple light scattering confirmed that creaming was the main mechanism behind the instability of MPEs. Both MPEs revealed pseudo-plastic behavior and predominant storage modulus (G') over the applied frequency range. The encapsulation efficiency of vitamin B₁₂ in MPEs was 98.3% and remained relatively constant during 28 d. These results suggested the excellent potential of hordein nanoparticles as appropriate candidate for designing multi-structural colloidal systems using plant proteins.

Preparation of zein-lecithin-EGCG complex nanoparticles stabilized peppermint oil emulsions: Physicochemical properties, stability and intelligent sensory analysis

Peppermint oil emulsions were prepared by using zein-lecithin-EGCG (Z-L/E) complex nanoparticles as emulsifiers. The preparation conditions of emulsions were optimized via measuring the particle size, surface tension and stability of emulsions, and peppermint oil of 3% (particle size = 375 nm, polydispersity index (PDI) = 0.45), the zein:lecithin ratio of 4:1 (w/w) (particle size = 396 nm), and the zein:EGCG ratio of 10:1 (w/w) (surface tension = 47.32 N/m) was the optimal condition. The rapid stability analysis showed that the instability mechanism of emulsions was ascribed to creaming and stratification, and the stability mechanism of emulsions was explored, indicating that the complex nanoparticles adsorbed on the surface of oil droplets to give Pickering emulsions. Electronic tongue experiments showed that the Z-E/L_4:1 stabilized emulsion was distinguished from the other three samples due to its good stability. The electronic nose experiment could distinguish the emulsions with different droplet sizes.

Construction of high internal phase Pickering emulsions stabilized by bamboo fungus protein gels with the effect of pH

This study is a contribution to explore natural protein sources as high internal phase Pickering emulsions (HIPPEs) stabilizers and to achieve full utilization of biological resources. Bamboo fungus proteins were obtained by alkaline extraction and subsequently transformed into protein gels by enzymatic cross-linking method. 1% (w/v) of bamboo protein gel particles (BGPs) were used to stabilize high HIPPEs (φ = 80%) using a one-step homogenization method. At pH 3, 9 and 11, BGPs could produce stable, gel-like oil/water HIPPEs with excellent storage stability. In contrast, at pH 5 and 7, stable HIPPEs could not be formed, which might be attributed to the variation of contact angle and electrostatic repulsion of BGPs. Structure analysis indicated that HIPPEs with gel-like structures were mainly stabilized by physical barriers and electrostatic repulsion. The present study is expected to provide new insight on comprehensive utilization of fungi sources.

High Internal-Phase Pickering Emulsions Stabilized by Xanthan Gum/Lysozyme Nanoparticles: Rheological and Microstructural Perspective

Food-grade high internal-phase Pickering emulsions (HIPPEs) stabilized by solid or colloidal particles with different advantages have attracted extensive attention nowadays. However, looking for new appropriate particle stabilizers is the common practice for HIPPEs preparation. It is crucial to find a new strategy for the development of functional HIPPEs with controllable properties. In this study, a high concentration of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) was used for the preparation of HIPPEs for the first time. Visual observations, creaming index (CI), microstructure, and rheology tests were carried out to investigate the potential of XG/Ly NPs as HIPPEs stabilizers. Results indicated that XG/Ly NPs could stabilize oil droplets in the concentration range of 0.5-4% (w/v). The HIPPEs with a minimal particle concentration of 1% exhibited remarkable physical stability. Rheological measurements showed that a high stability of solid-like HIPPEs was successfully obtained with a higher concentration of XG/Ly NPs. Overall, the HIPPEs stabilized by different concentrations of XG/Ly NPs exhibited excellent rheological and structural properties, which might provide a feasible strategy for the development of functional emulsion systems with controllable structures.

Recent Innovations in Emulsion Science and Technology for Food Applications

Emulsion technology has been used for decades in the food industry to create a diverse range of products, including homogenized milk, creams, dips, dressings, sauces, desserts, and toppings. Recently, however, there have been important advances in emulsion science that are leading to new approaches to improving food quality and functionality. This article provides an overview of a number of these advanced emulsion technologies, including Pickering emulsions, high internal phase emulsions (HIPEs), nanoemulsions, and multiple emulsions. Pickering emulsions are stabilized by particle-based emulsifiers, which may be synthetic or natural, rather than conventional molecular emulsifiers. HIPEs are emulsions where the concentration of the disperse phase exceeds the close packing limit (usually >74%), which leads to novel textural properties and high resistance to gravitational separation. Nanoemulsions contain very small droplets (typically d < 200 nm), which leads to useful functional attributes, such as high optical clarity, resistance to gravitational separation and aggregation, rapid digestion, and high bioavailability. Multiple emulsions contain droplets that have smaller immiscible droplets inside them, which can be used for reduced-calorie, encapsulation, and delivery purposes. This new generation of advanced emulsions may lead to food and beverage products with improved quality, health, and sustainability.

Translocation Dynamics of High-Internal Phase Double Emulsions in Narrow Channels

We numerically study the translocation dynamics of double emulsion drops with multiple close-packed inner droplets within constrictions. Such liquid architectures, which we refer to as HIPdEs (high-internal phase double emulsions), consist of a ternary fluid, in which monodisperse droplets are encapsulated within a larger drop in turn immersed in a bulk fluid. Extensive two-dimensional lattice Boltzmann simulations show that if the area fraction of the internal drops is close to the packing fraction limit of hard spheres and the height of the channel is much smaller than the typical size of the emulsion, the crossing yields permanent shape deformations persistent over long periods of time. Morphological changes and rheological response are quantitatively assessed in terms of the structure of the velocity field, circularity of the emulsion, and rate of energy dissipated by viscous forces. Our results may be used to improve the design of soft mesoscale porous materials, which employ HIPdEs as templates for tissue engineering applications.

Current Progress in the Utilization of Soy-Based Emulsifiers in Food Applications-A Review

Soy-based emulsifiers are currently extensively studied and applied in the food industry. They are employed for food emulsion stabilization due to their ability to absorb at the oil–water interface. In this review, the emulsifying properties and the destabilization mechanisms of food emulsions were briefly introduced. Herein, the effect of the modification process on the emulsifying characteristics of soy protein and the formation of soy protein–polysaccharides for improved stability of emulsions were discussed. Furthermore, the relationship between the structural and emulsifying properties of soy polysaccharides and soy lecithin and their combined effect on the protein stabilized emulsion were reviewed. Due to the unique emulsifying properties, soy-based emulsifiers have found several applications in bioactive and nutrient delivery, fat replacer, and plant-based creamer in the food industry. Finally, the future trends of the research on soy-based emulsifiers were proposed.