The potential of anthocyanins in smart, active, and bioactive eco-friendly polymer-based films: A review

Review of Recent Advances in Intelligent and Antibacterial Packaging for Meat Quality and Safety

Intelligent and antimicrobial packaging technologies are transforming meat preservation by enhancing food safety, enabling real-time quality monitoring, and extending shelf life. This review critically examines advancements in intelligent systems, including radio frequency identification (RFID), gas sensors, time-temperature indicators (TTIs), and colorimetric indicators for continuous freshness assessment. A key focus is natural compound-based chromogenic indicators, which establish visual spoilage detection via distinct color transitions. Concurrently, antimicrobial systems integrating inorganic compounds, organic bioactive agents, and natural antimicrobials effectively inhibit microbial growth. Strategic incorporation of these agents into polymeric matrices enhances meat safety, supported by standardized evaluation protocols for regulatory compliance and quality assurance. Future research should prioritize optimizing sensitivity, cost-efficiency, and sustainability, alongside developing biodegradable materials to balance food safety with reduced environmental impact, advancing sustainable food supply chains.

Two different fabrication method of high-hydrophobic Bi-layer indicators based on sodium alginate-polyvinyl alcohol/chitosan-zein incorporated with alizarin@ZIF-8 for beef freshness visualization

Intelligent films are essential for real-time monitoring of food spoilage. However, the application is often limited by challenges such as hydrophilicity and color instability. In this study, two high hydrophobic bilayer indicators based on sodium alginate-polyvinyl alcohol/chitosan-zein with alizarin grafted onto ZIF-8 carrier (AL@ZIF-8) were fabricated using the casting method and electrospinning, respectively. Molecular docking simulations confirmed the successful grafting of AL@ZIF-8 onto the film substrates. The performance of films was compared and the effectiveness in monitoring freshness indicators was evaluated. The cast film had a precisely controlled thickness due to self-assembly performance, resulting in superior mechanical properties (TS = 10.64 MPa, EB = 43.764 %). In comparison, the nanofiber films demonstrated higher UV-blocking ability (ΔE < 4), faster spoilage response, and greater safety (Cell viability >80 %). Importantly, the nanofiber films exhibited higher sensitivity in monitoring beef freshness, with a color change pattern strongly correlating with spoilage (R2 = 0.8976).

Fast production of highly sensitive nanotextured nonwovens for detection of volatile amines, bacterial growth, and pH monitoring: New tools for real-time food quality monitoring

An efficient manufacturing of colorimetric nonwoven indicators represents a promising alternative to enable applications of such materials in food quality monitoring. The objective of this study is to use the solution blow spinning technique (SBS) to rapidly produce colorimetric nonwoven indicators based on polycaprolactone, incorporating natural or synthetic pH indicators to detect volatile amines, bacterial growth and monitor pH. Produced via the SBS method, these indicators were characterized aiming their physical, mechanical, thermal, and spectroscopic properties, evaluating their efficacy in detecting amines, monitoring bacterial growth, and pH, as well as assessing color stability during storage. The thermal stability and mechanical properties of the nonwovens practically always increased with the incorporation of natural and synthetic indicators. When exposed to volatile amines, the nonwoven indicators, particularly those embedded with bromophenol blue, displayed remarkable color change abilities in the presence of five volatile amines. These smart nonwovens in direct contact with E. coli K-12 or its volatiles in 24 h changed their color perceptible to the naked eye. The nanofiber nonwovens displayed visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10). The smart nonwovens rapidly produced by the solution blow spinning method prove to be a promising tool for real-time monitoring of food freshness.

Smart pH-sensitive indicators based on rice starch/pectin/alginate loading Lambrusco pomace extract and curcumin to track the freshness of pink shrimps

This research is focused on the formulation and testing of green visual pH-sensitive indicators based on natural extracts from Curcuma Longa (CUR) and Lambrusco wine pomace (LAM), an Italian wine variety, incorporated into rice starch/pectin/alginate matrixes for non-destructively detecting shrimps freshness in real-time. The effect of the mixed indicators and their synergic combination on the properties and performances of indicators was investigated. Both the extracts and their combination showed pronounced pH responsiveness. Films were widely characterized in terms of morphological, barrier, spectroscopic, thermal and mechanical properties. The presence of extracts slightly reduced the transparency of the films while the film with both the extracts exhibited the highest Young's modulus (14.17 MPa), lowest moisture content (27.67 %) and a WVP value (0.79 g m m-2 s-1 Pa-1) intermediate between the Lambrusco extract loaded film and the curcumin based one. Moreover, the pH-sensitive systems showed a noticeable antioxidant activity (96 % for LAM/CUR film) and enhanced antibacterial activity toward E. coli and S. aureus compared to pristine films. Besides, the mixed indicator-based film showed high sensitivity to ammonia (68 %) determining an ΔE value easily detectable by the human eye. Finally, the films were applied as cheap visual indicators for monitoring the freshness of packaged fresh shrimps over time stored at T = 4 °C and T = 25 °C through the colourimetric variation induced by pH changes. The TVB-N value, which was correlated to the microbial count for shrimps over time, reached the rejection limit at 33 h for T = 25 °C and 54 h for T = 4 °C. The colour changes were recorded simultaneously and the turning to deeper colours indicated the decomposition of proteins to organic amines and the spoilage of food. Results show that the produced films provide easily detectable colour changes during food spoilage proving that, being fabricated from natural sources, they represent novel and sustainable tools for multi-purpose intelligent food packaging applications.

Starch-pectin smart tag containing purple carrot peel anthocyanins as a potential indicator of analogous meat freshness

Smart films of starch/pectin and purple carrot peel (PCP) containing anthocyanins were developed, characterized, and used as pH-responsive tags to monitor plant-based chicken analogous. This study innovates by incorporating PCP in the film solution both as an extract and as a powder, and the resulting tags were applied to a plant-based food. PCP powder <100-mesh was directly incorporated into the film-forming suspension. For powder >100-mesh, two extracts were tested: an aqueous solution and a 1 % NADES solution added to the film-forming suspension. Quantification of PCP anthocyanins by HPLC showed a higher extraction under acidic conditions (1664 mg C3G equivalents 100 g-1). Films with PCP presented greater light protection. Films with 15 % and 25 % PCP and those with added extract showed better tensile strength (3.0-3.6 MPa), elongation at break (16-20 %) and a water contact angle of 52°. All films responded to pH variations (1 to 14) and ammonia vapor and showed ΔE* values >5. After 3 days, films used as smart tags monitoring chicken analogous presented noticeable color differences for PCPNADES (55 ± 8) and 15%PCP (40 ± 1). PCP showed strong potential as a pigmenting agent in films, especially as an aqueous extract with NADES for use as pH-responsive tags in chicken analogous.

Anthocyanin-rich grape pomace extract encapsulated in protein fibers: Colorimetric profile, in vitro release, thermal resistance, and biological activities

Red wine grape pomace is an important source of bioactive compounds with biological activities of interest. Grape pomace extract can be encapsulated in ultrafine fibers using the electrospinning technique. Encapsulation is used to increase stability and protect the phenolic compounds in the extract. In this study, zein fibers were developed for encapsulation of grape pomace extract (0 %, 5 %, 10 %, and 15 % w/w). The extract was evaluated for colorimetric profile, whereas the ultrafine zein fibers carrying the extract were assessed for morphology, loading capacity, in vitro release profile, thermal and thermogravimetric properties, thermal resistance, hydrophilicity, and antioxidant and antimicrobial activities. The grape pomace extract changed color depending on pH, ranging from pink (pH 1) to yellow (pH 13 and 14). The fibers presented a smooth and uniform structure, with diameters of approximately 450 nm and a loading capacity of up to 82 %. The membranes of ultrafine fibers demonstrated hydrophilic behavior, and the in vitro release profile was dependent on the concentration of the added extract. Furthermore, the fibers were observed thermally protect the encapsulated compounds and maintain their antioxidant and antimicrobial activities. These findings indicate that the produced material has potential applications in the development of active and intelligent packaging for the food industry.

Fabrication of antimicrobial packaging based on polyaminopropyl biguanide incorporated pectin/polyvinyl alcohol films for fruit preservation

Pectin (PEC)/polyvinyl alcohol (PVA), plasticizers, and polyaminopropyl biguanide (Pb) (0.125%-1%) were used to prepare the film solution. The results demonstrated significantly enhanced tensile strength and elongation at break of PEC/PVA/Pb 0.25% film than PEC/PVA film. Scanning electron microscopy was carried out to investigate the continuous and dense structure of the PEC/PVA/ Pb0.25% film. FTIR, XPS, and XRD revealed that Pb addition to the PEC/PVA film matrix changed its physicochemical properties by forming new hydrogen and CN bonds. Moreover, the composite films exhibited strong antimicrobial activity against food-borne microorganisms (E. coli and S. aureus), and post-harvest pathogens (P. italicum and F. proliferatum) in vitro. The composite film effectively inhibited P. italicum growth during citrus experiments, while maintaining nutritional components (vitamin C, total flavonoid, and total polyphenol content). Overall, the antimicrobial composite film presented promising applicability in food packaging.

Fast and sustainable production of smart nanofiber mats by solution blow spinning for food quality monitoring: Potential of polycaprolactone and agri-food residue-derived anthocyanins

The shelf life of perishable foods is estimated through expensive and imprecise analyses that do not account for improper storage. Smart packaging, obtained by agile manufacturing of nanofibers functionalized with natural pigments from agri-food residues, presents promising potential for real-time food quality monitoring. This study employed the solution blow spinning (SBS) technique for the rapid production of smart nanofiber mats based on polycaprolactone (PCL), incorporating extracts of agricultural residues rich in anthocyanins from eggplant (EE) or purple cabbage (CE) for monitoring food quality. The addition of EE or CE to the PCL matrix increased the viscosity of the solution and the diameter of the nanofibers from 156 nm to 261-370 nm. The addition of extracts also improved the mechanical and water-related properties of the nanofibers, although it reduced the thermal stability. Attenuated total reflectance Fourier-transform infrared spectroscopy confirmed the incorporation of anthocyanins into PCL nanofibers. Nanofiber mats incorporated with EE or CE exhibited visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10), and ammonia vapor. Smart nanofibers have demonstrated the ability to monitor fish fillet spoilage through visible color changes (ΔE ≥ 3) during storage. Consequently, smart nanofibers produced by the SBS technique, using PCL and anthocyanins from agro-industrial waste, reveal potential as smart packaging materials for food.

Recent Advances in Purple Sweet Potato Anthocyanins: Extraction, Isolation, Functional Properties and Applications in Biopolymer-Based Smart Packaging

Petroleum-based plastic packaging materials have negative impacts on the environment and food safety. Natural biopolymer-based food packaging materials are the proper substitutes for plastic-based ones, which is because biopolymers are nontoxic, biodegradable and even edible. The incorporation of bioactive and functional substances into a biopolymer-based film matrix can produce novel smart packaging materials. Anthocyanins, one class of natural colorants with potent antioxidant activity and pH-response color-changing ability, are suitable for producing biopolymer-based smart packaging films. The purple sweet potato is a functional food rich in anthocyanins. In the past decade, numerous studies have reported the extraction of anthocyanins from purple sweet potato and the utilization of purple sweet potato anthocyanins (PSPAs) in biopolymer-based smart packaging film production. However, no specific review has summarized the recent advances on biopolymer-based smart packaging films containing PSPAs. Therefore, in this review, we aim to systematically summarize the progress on the extraction, isolation, characterization, purification and functional properties of PSPAs. Moreover, we thoroughly introduce the preparation methods, physical properties, antioxidant and antimicrobial activity, pH sensitivity, stability and applications of biopolymer-based smart packaging films containing PSPAs. Factors affecting the extraction and functional properties of PSPAs as well as the properties of biopolymer-based films containing PSPAs are discussed.

Monitoring fish freshness with pH-sensitive hydrogel films containing quercetin or eucalyptol

This research developed pH-sensitive smart films using carboxymethyl cellulose (CMC) and collagen (COL), combined with either quercetin (QCT) or eucalyptol (EUC), to prevent fish meat spoilage. COL, extracted from isinglass, was confirmed as type I through SDS-PAGE. The films were characterized using FESEM, FTIR, and TGA. The addition of QCT or EUC enhanced antioxidant levels to 60.16% and 70.83%, respectively, up from a baseline of 10.4%. It also increased tensile strength from 3.32 ± 0.22 to 11.8 ± 0.25 and 13.2 ± 0.27 MPa, and enhanced elongation at break from 5 ± 3.1% to 27.7 ± 1.1% and 30.15 ± 2.1%. Fish meat packaged with QCT showed a lower spoilage rate due to the antibacterial and antioxidant effects of EUC and QCT (TVBN = 7.37 ± 0.01), compared to CMC/COL film (TVBN = 10.11 ± 0.02) and non-packaged fish (TVBN = 11.23 ± 0.01). The films exhibit >80% transparency, highlighting their suitability for food packaging. CMC/COL/QCT is preferred for fish packaging because it offers better mechanical properties and lower TVB-N levels.

Intelligent Packaging Systems with Anthocyanin: Influence of Different Polymers and Storage Conditions

With the aim of meeting the growing demand for safe food, intelligent packaging has emerged, which monitors the conditions of the food and informs the consumer about its quality directly at the time of purchase. Among intelligent packaging options, colorimetric indicator films, which change color in response to changes in the food, such as the release of volatile compounds, have been widely studied. Among them, pH indicator films composed of dyes sensitive to small variations in the pH value of the food surface have received greater attention in recent years. Anthocyanins, which are natural pigments, have stood out as one of the most commonly used sources of dyes in the production of these indicator films. In this context, the present review aims to present an updated overview of research employing anthocyanins in indicator films, including their stability under different storage conditions, the influence of different polymers used in their production, and alternative techniques for maintaining stability.

Anthocyanin Profiles in the Tropical Fruits Eugenia jambolana and Inga edulis: A Comparative Study Using Paper Spray Ionization (PSI-MS), Tissue Spray Ionization (TSI-MS), and Direct Infusion (DI-MS)

Paper spray ionization (PSI-MS) and tissue spray ionization (TSI-MS) mass spectrometry are simple and rapid ambient ionization mass spectrometry techniques that offer numerous advantages over conventional analysis methods. This study aims to analyze the efficiency of detecting anthocyanins from Eugenia jambolana fruit peel and Inga edulis seeds using PSI-MS, TSI-MS, and DI-MS (direct infusion). DI-MS exhibited high efficiency, detecting all compounds in abundance, with anthocyanins malvidin 3,5-O-diglucoside (1) and petunidin 3,5-O-diglucoside (2) being the most prevalent. PSI-MS, however, struggled to detect delphinidin 3-O-glucoside and showed lower abundances for compounds 1, 2, 3 (delphinidin 3,5-O-diglucoside), and 4 (petunidin 3-O-glucoside) compared to DI-MS, attributed to the technique's challenges with molecular weight and polarity. TSI-MS was least effective, detecting only compounds 1, 2, and 3 at low intensities. The overall unique compounds identified across techniques were 134, emphasizing the importance of comprehensively employing multiple methods to analyze anthocyanins in these edible plants.

The Use of Novel Colorimetric Films to Monitor the Freshness of Pork, Utilizing Konjac Glucomannan With Curcumin/Alizarin

In this study, different proportions of curcumin (CUR) and alizarin (ALI) were added to konjac glucomannan (KG)/ polyvinyl alcohol (PVA) to prepare an active intelligent packaging film and evaluate its potential to indicate pork freshness. The mixed indicator had a richer color hierarchy in the buffer solution with pH = 2-12. The surface of the KG-2C2A and KG-1C3A films is smoother and has fewer cross-section faults. With the increase of CUR content in the film, the crystal structure becomes more prominent, leading to poor compatibility with KG. The WAC of KG-3C1A and KG-1C3A films was significantly higher than that of the other groups, and they had better hydrophobicity. With the increase of CUR content in the films, the thermal stability of the films was enhanced, and the KG-C films showed the highest thermal stability. Among them, the KG-2A2C and KG-1C3A films showed the most significant color change during pork spoiling and could be used to monitor the freshness of pork. As a pH colorimetric indicator, CUR and ALI-coated KG films might be of great potential in fresh meat monitoring.

Electrospinning-based sensing technologies: Opportunities for food applications

The article explores the science and practice of electrospinning, tracing its history and examining the factors that influence fiber morphology, including the solution composition, processing conditions, and environmental conditions. It offers a thorough examination of electrospinning fundamentals geared toward generating an appropriate platform for creating tailored nanofibers for sensing applications in the food industry. These nanofibers play a critical role in food analysis, sensing, and traceability, and we highlight their effectiveness in identifying pesticide residues, food components, antibiotics, heavy metals, and foodborne pathogens as well as in monitoring the freshness and spoilage of food. The use of electrospinning technology is poised to make sensing platforms more accessible, affordable, and widespread, thereby significantly contributing to the improvement of food quality and safety monitoring practices.

Antimicrobial Polymer Films with Grape Seed and Skin Extracts for Food Packaging

The development of antimicrobial food packaging is a very important and current goal, but it still difficult to implement in practice. Reducing microbial contamination and preserving food quality are very important tasks for food manufacturers as the use of antimicrobial packaging can preserve the health of consumers. On the other hand, the difficulty of degrading packaging materials, leading to environmental pollution, is also an important problem. These problems can be solved by using biodegradable biopolymers and antimicrobial agents in the production of food packaging. Very suitable antimicrobial agents are grape seed and skin extracts as they have high antioxidant and antimicrobial capacity and are obtained from grape pomace, a waste product of winemaking. The present review presents the valuable bioactive compounds contained in grape seeds and skins, the methods used to obtain the extracts, and their antimicrobial and antioxidant properties. Then, the application of grape seed and skin extracts for the production of antimicrobial packaging is reviewed. Emphasis is placed on antimicrobial packaging based on various biopolymers. Special attention is also paid to the application of the extract of grape skins to obtain intelligent indicator packages for the continuous monitoring of the freshness and quality of foods. The focus is mainly placed on the antimicrobial properties of the packaging against different types of microorganisms and their applications for food packaging. The presented data prove the good potential of grape seed and skin extracts to be used as active agents in the preparation of antimicrobial food packaging.

Ammonia-Responsive Colorimetric Film of Phytochemical Formulation (Alizarin) Grafted onto ZIF-8 Carrier with Poly(vinyl alcohol) and Sodium Alginate for Beef Freshness Monitoring

In this study, we devised a photothermally stable phytochemical dye by leveraging alizarin in conjunction with the metal-organic framework ZIF-8 (AL@ZIF-8). The approach involved grafting alizarin into the microporous structure of ZIF-8 through physical adsorption and hydrogen-bonding interactions. AL@ZIF-8 significantly enhanced the photostability and thermostability of alizarin. The nanoparticles demonstrate substantial color changes in various pH environments, showcasing their potential for meat freshness monitoring. Furthermore, we introduced an intelligent film utilizing poly(vinyl alcohol)-sodium alginate-AL@ZIF-8 (PA-SA-ZA) for detecting beef freshness. The sensor exhibited a superior water contact angle (52.34°) compared to the alizarin indicator. The color stability of the film was significantly enhanced under visible and UV light (ΔE < 5). During beef storage, the film displayed significant color fluctuations correlating with TVB-N (R2=0.9067), providing precise early warning signals for assessing beef freshness.

Dietary Sources, Stabilization, Health Benefits, and Industrial Application of Anthocyanins-A Review

Natural phytochemicals are well known to protect against numerous metabolic disorders. Anthocyanins are vacuolar pigments belonging to the parent class of flavonoids. They are well known for their potent antioxidant and gut microbiome-modulating properties, primarily responsible for minimizing the risk of cardiovascular diseases, diabetes, obesity, neurodegenerative diseases, cancer, and several other diseases associated with metabolic syndromes. Berries are the primary source of anthocyanin in the diet. The color and stability of anthocyanins are substantially influenced by external environmental conditions, constraining their applications in foods. Furthermore, the significantly low bioavailability of anthocyanins greatly diminishes the extent of the actual health benefits linked to these bioactive compounds. Multiple strategies have been successfully developed and utilized to enhance the stability and bioavailability of anthocyanins. This review provides a comprehensive view of the recent advancements in chemistry, biosynthesis, dietary sources, stabilization, bioavailability, industrial applications, and health benefits of anthocyanins. Finally, we summarize the prospects and challenges of applications of anthocyanin in foods.

Active cellulose acetate/purple sweet potato anthocyanins@cyclodextrin metal-organic framework/eugenol colorimetric film for pork preservation

As a natural pH-sensing colorant, purple sweet potato anthocyanins (PSPAs) have demonstrated great potential in colorimetric film for freshness monitoring. However, the photothermal instability of PSPAs is still a challengeable issue. Herein, γ-cyclodextrin metal-organic framework (CD-MOF) loaded with PSPAs (PSPAs@CD-MOF, i.e., PM) and eugenol (EUG) were incorporated in cellulose acetate (CA) matrix for developing a smart active colorimetric film of CA/PM/EUG, where PM and EUG were hydrogen-bonded with CA. Attentions were focused on the photothermal colorimetric stability, colorimetric response, and antibacterial activity of the films. The presence of PM and EUG endowed the film outstanding UV-blocking performance and enhanced the barrier against water vapor and oxygen. Target film of CA/PM15/EUG10 had good photothermal colorimetric stability due to the protection of CD-MOF on PSPAs and the color changes with pH-stimuli were sensitive and reversible. In addition to antioxidant activity, CA/PM15/EUG10 had antibacterial activity against Escherichia coli and Staphylococcus aureus. The application trial results indicated that the CA/PM15/EUG10 was valid to indicate pork freshness and extended the shelf-life by 100 % at 25 °C, which has demonstrated a good perspective on smart active packaging for freshness monitoring and shelf-life extension.

Anti-bacterial films developed by incorporating shikonin extracted from radix lithospermi and nano-ZnO into chitosan/polyvinyl alcohol for visual monitoring of shrimp freshness

In recent years, the utilization of smart colorimetric packaging films for monitoring food freshness has garnered significant concentration. However, their limited tensile strength, hydrophobicity, antioxidant, and antibacterial properties have been substantial barriers to widespread adoption. In this study, we harnessed the potential of biodegradable materials, specifically chitosan/polyvinyl alcohol, alongside shikonin extracted from Radix Lithospermi and ZnO nanoparticles, to create a novel colorimetric sensing film. This film boasts an impressive tensile strength of 82.36 ± 2.13 MPa, enhanced hydrophobic characteristics (exemplified by a final contact angle of 99.81°), and outstanding antioxidant and antibacterial properties. It is designed for real-time monitoring of shrimp freshness. Additionally, we verified the effectiveness of this sensing film in detecting shrimp freshness across varying temperature conditions, namely 25 °C and 4 °C was validated through the measurement of total volatile basic nitrogen (TVB-N). Visual inspection unequivocally revealed a transition in color from dark red to purple-light blue and finally to dark bluish providing a clear indication of shrimp spoilage, which demonstrated a strong correlation with the TVB-N content in shrimp measured through standard laboratory procedures. The colorimetric sensing film developed in this study holds great promise for creating smart labels with exceptional antioxidant and antibacterial properties, tailored for visual freshness monitoring of shrimp.

Intelligent and active biodegradable biopolymeric films containing carotenoids

There is growing interest in the use of natural bioactive compounds for the development of new bio-based materials for intelligent and active food packaging applications. Several beneficial effects have been associated with the antioxidant and antimicrobial potentials of carotenoid compounds. In addition, carotenoids are sensitive to pH changes and oxidation reactions, which make them useful bioindicators of food deterioration. This review summarizes the current research on the application of carotenoids as novel intelligent and active biodegradable food packaging materials. Carotenoids recovered from food processing by-products can be used in the development of active food packaging materials due to their antioxidant properties. They help maintain the stability of lipid-rich foods, such as vegetable oils. Additionally, when incorporated into films, carotenoids can monitor food oxidation, providing intelligent functionalities.

Anthocyanin-Loaded Polymers as Promising Nature-Based, Responsive, and Bioactive Materials

Anthocyanins are a specific group of molecules found in nature that have recently received increasing attention due to their interesting biological and colorimetric properties that have been successfully applied in several fields such as food preservation and biomedicine. Consequently, reviews devoted to a general overview of these flavonoids have proliferated in recent years. Meanwhile, the incorporation of anthocyanins into polymeric systems has become an interesting strategy to widen the applicability of these molecules and develop new smart and functional polymers in the above cited areas. However, anthocyanin-based polymers have been scarcely reviewed in the literature. Accordingly, this review aims to be a systematic summary of the most recent approaches for the incorporation of anthocyanins into macro-, micro-, or nanostructured polymers. Moreover, this work describes the fundamentals of the applicability of smart anthocyanin-based polymers and offers an updated review of their most interesting applications as sensors, biological regulators, and active materials.

Material Breakthroughs in Smart Food Monitoring: Intelligent Packaging and On-Site Testing Technologies for Spoilage and Contamination Detection

Despite extensive commercial and regulatory interventions, food spoilage and contamination continue to impose massive ramifications on human health and the global economy. Recognizing that such issues will be significantly eliminated by the accurate and timely monitoring of food quality markers, smart food sensors have garnered significant interest as platforms for both real-time, in-package food monitoring and on-site commercial testing. In both cases, the sensitivity, stability, and efficiency of the developed sensors are largely informed by underlying material design, driving focus toward the creation of advanced materials optimized for such applications. Herein, a comprehensive review of emerging intelligent materials and sensors developed in this space is provided, through the lens of three key food quality markers - biogenic amines, pH, and pathogenic microbes. Each sensing platform is presented with targeted consideration toward the contributions of the underlying metallic or polymeric substrate to the sensing mechanism and detection performance. Further, the real-world applicability of presented works is considered with respect to their capabilities, regulatory adherence, and commercial potential. Finally, a situational assessment of the current state of intelligent food monitoring technologies is provided, discussing material-centric strategies to address their existing limitations, regulatory concerns, and commercial considerations.

Intelligent active films of sodium alginate and konjac glucomannan mixed by Lycium ruthenicum anthocyanins and tea polyphenols for milk preservation and freshness monitoring

To achieve real-time monitoring of food freshness, a pH-responsive film based on sodium alginate-konjac glucomannan loaded with Lycium ruthenicum anthocyanins (LRA) was prepared, with the addition of tea polyphenols (TP) to enhance the stability of LRA. The surface structure of the films was observed by AFM. The results of FTIR and molecular docking simulation showed that LRA and TP were bound to polysaccharide by hydrogen bonds. The mechanical properties, barrier properties, and antioxidant/antibacterial properties of the films were significantly improved and the films showed obvious color response to pH. Notably, the AFM images showed TP and LRA could lead to more severe damage to the bacterial structure. The results of molecular docking simulation suggested that TP and LRA could act on different components of the bacterial cell wall, indicating their synergistic mechanism in antimicrobial activity. Moreover, the stability of LRA was improved due to the interactions of TP and polysaccharides with LRA. The aggregates formed by TP and LRA were clearly observed by AFM. Finally, the film showed excellent preservation and freshness monitoring effect in milk. In conclusion, TP-LRA-SA-KGM intelligent film exhibited excellent performance and represented a promising novel food packaging material with potential applications.

Recent advances in biomacromolecule-based nanocomposite films for intelligent food packaging- A review

In food packaging, biopolymer films are biodegradable films made from biomacromolecule-based natural materials, while biocomposite films are hybrids of two or more materials, with at least one being biodegradable. Bionanocomposites are different than the earlier ones, as they consist of various nanofillers (both natural and inorganic) in combination with biomacromolecule-based biodegradable materials to make good compostable bionanocomposites. In this regard, a new type of material known as bionanocomposite has been recently introduced to improve the properties and performance of biocomposite films. Bionanocomposites are primarily developed for active packaging, but their use in intelligent packaging is also noteworthy. For example, bionanocomposites developed using a hybrid of anthocyanin and carbon dots as intelligent materials have shown their high pH-sensing properties. The natural nanofillers (like nanocellulose, nanochitosan, nanoliposome, cellulose nanocrystals, cellulose nanofibers, etc.) are being employed to promote the sustainability, degradability and safety of bionanocomposites. Overall, this article comprehensively reviews the latest innovations in bionanocomposite films for intelligent food packaging over the past five years. In addition to packaging aspects, the role of nanofillers, the importance of life cycle assessment (LCA) and risk assessment, associated challenges, and future perspectives of bionanocomposite intelligent films are also discussed.

Development of smart packaging halochromic films embedded with anthocyanin pigments; recent advances

Nowadays, innovative biodegradable packaging based on pH-sensitive natural dyes is being developed. These smart systems quickly inform the food quality to the consumer and monitor fresh foods in real-time. Smart packaging protects food against ambiance risks and simultaneously sends information to users for variations and alterations in the packaging settings. Anthocyanin (ACY), among the natural dyes used as indicators serves as water-soluble flavonoid pigments which made reflection in light in the red-blue range and can detect chemical and microbial alterations in foods based on their pH-susceptible conditions; on the other hand, they have considerable antimicrobial and antioxidant functions that result in the longer shelf life of food products. They also have beneficial properties including anti-cancer and anti-inflammatory functions, avoidance of heart diseases, overweight, and diabetes. Hence, this paper deals with the characteristics of smart packaging films based on anthocyanins, as well as their application in various food industries.

The Extraction and Impact of Essential Oils on Bioactive Films and Food Preservation, with Emphasis on Antioxidant and Antibacterial Activities-A Review

Essential oils, consisting of volatile compounds, are derived from various plant parts and possess antibacterial and antioxidant properties. Certain essential oils are utilized for medicinal purposes and can serve as natural preservatives in food products, replacing synthetic ones. This review describes how essential oils can promote the performance of bioactive films and preserve food through their antioxidant and antibacterial properties. Further, this article emphasizes the antibacterial efficacy of essential oil composite films for food preservation and analyzes their manufacturing processes. These films could be an attractive delivery strategy for improving phenolic stability in foods and the shelf-life of consumable food items. Moreover, this article presents an overview of current knowledge of the extraction of essential oils, their effects on bioactive films and food preservation, as well as the benefits and drawbacks of using them to preserve food products.

Development and characterization of pH responsive sodium alginate hydrogel containing metal-phenolic network for anthocyanin delivery

Favorable hydrogels can be used as a material to deliver bioactive molecules and improve the stability of bioactive substances, while their safety needs to be improved. In this study, protocatechuic acid (PCA) and Fe3+ were rapidly self-assembled to form a metal-phenolic network under different pH conditions, and then sodium alginate (SA) was added to prepare the SA/PCA/Fe hydrogel without adding other chemical reagents. The structural characteristic of SA/PCA/Fe hydrogel was characterized by infrared spectroscopy, X-ray diffraction analysis and scanning electron microscopy. The results showed that the structures of SA/PCA/Fe hydrogels prepared at different pH values were significantly different. The texture analysis, water-holding measurement and rheological analysis indicated that the SA/PCA/Fe hydrogel showed higher gel strength, water holding capacity and storage modulus. Thermogravimetric analysis illuminated that the SA/PCA/Fe hydrogel enhanced the thermal stability of free anthocyanins through encapsulating anthocyanins. Moreover, in vitro simulated digestion experiment revealed that SA/PCA/Fe hydrogel could control the release of anthocyanins in the simulated gastrointestinal tract. To sum up, this present study might provide a safer and feasible way for the delivery of bioactive substances.

Development of antioxidant and smart NH3 -sensing packaging film by incorporating bilirubin into κ-carrageenan matrix

BACKGROUND

Active and smart food packaging based on natural polymers and pH-sensitive dyes as indicators has attracted widespread attention. In the present study, an antioxidant and amine-response color indicator film was developed by incorporating bilirubin (BIL) into the κ-carrageenan (Carr) matrix.

RESULTS

It was found that the introduction of BIL had no effect on the crystal/chemical structure, water sensitivity and mechanical performance of the Carr-based films. However, the barrier properties to light and the thermal stability were significantly improved after the addition BIL. The Carr/BIL composite films exhibited excellent 1,1-diphenyl-2-picryl-hydrazyl (i.e. DPPH)/2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (i.e. ABTS) free radical scavenging abilities and color responsiveness to different concentrations of ammonia. The application assay reflected that the Carr/BIL0.0075 film was effective in delaying the oxidative deterioration of shrimp during storage and realizing the color response of its freshness through the change of b* value.

CONCLUSION

Active and smart packaging films were successfully prepared by incorporating different contents of BIL into the Carr matrix. The present study helps to further encourage the design and development of a multi-functional packaging material. © 2023 Society of Chemical Industry.

Development of alginate-based film incorporated with anthocyanins of red cabbage and zinc oxide nanoparticles as freshness indicator for prawns

The objective of this study was to develop pH-sensitive film indicators for intelligent food packaging by incorporating red cabbage anthocyanins (RCA) and zinc oxide nanoparticles (ZnO NPs) into an alginate (Alg) film, aiming to mitigate the risk of foodborne illnesses. The films were fabricated using a solvent-casting method and crosslinked with a calcium chloride (CaCl2) solution. Thorough evaluations of the films' physical, mechanical, and structural properties demonstrated significant improvements in elastic modulus and UV/vis light barrier characteristics, reduced water vapor permeability (WVP), and moisture content attributed to integrating RCA and ZnO NPs. The resulting film displayed discernible color changes when exposed to various pH buffer solutions and ammonia vapor, indicating heightened sensitivity to pH fluctuations due to the presence of ZnO NPs. Visual assessment using prawns as test specimens revealed a color shift from violet (indicating satisfactory condition) to blue-greenish (indicating spoilage), corroborated by colorimetric analysis. Moreover, the Alg/ZnO/RCA film exhibited antioxidant and antibacterial properties, demonstrated biodegradation activity, and showed no toxic effects on RSC96 cells, further underscoring its potential as an effective freshness indicator for food products.

Electrospun zein nanofibers containing anthocyanins extracted from red cabbage (Brassica oleracea L.)

This study aims to fabricate and characterize the zein nanoribbons loaded with different concentrations (2.5, 3, 3.5, 4, and 4.5°wt%) of the anthocyanins extracted from red cabbage through the electrospinning technique. It was demonstrated that an increase in anthocyanin concentration caused an increase in viscosity and electrical conductivity without any significant change in the surface tension of the electrospinning solution. It was shown by scanning electron microscopy that an increase in anthocyanins concentration reduced the porosity of the bead-free ribbons compared with blank zein. The Fourier transform infrared spectroscopy analysis, X-ray diffraction patterns, and differential scanning calorimetry results reflected the presence of significant molecular interactions between zein and anthocyanins. Zein-anthocyanins showed high encapsulation efficiency of close to 100%. As a result, it can conclude that electrospinning is a promising method to encapsulate functional ingredients like anthocyanins.

Innovative Integration of Arrayan (Luma apiculata) Extracts in Chitosan Coating for Fresh Strawberry Preservation

Strawberries are a rich source of vitamins and antioxidants, among other nutrients, but they are highly susceptible to mechanical injuries, dehydration, and microbial spoilage, and thus have a limited post-harvest shelf-life. Bioactive edible coatings have been studied to decrease or prevent these damages. In this study, ethanolic extracts of Arrayan (Luma apiculata), a traditional berry from the south of Chile, were used to enrich a chitosan-based edible film and coat fresh strawberries. A long-term storage (10 °C) study was conducted to determine the strawberries' weight loss, microbial stability, fruit firmness impact, and antioxidant activity. Later, a sensory panel was conducted to determine overall consumer acceptance. Our results show that the bioactive coating inhibited the growth of different pathogenic bacteria and spoilage yeast. In the stored strawberries, the weight loss was significantly lower when the bioactive coating was applied, and the samples' firmness did not change significantly over time. Microbial growth in the treated strawberries was also lower than in the control ones. As expected, the antioxidant activity in the coated strawberries was higher because of the Arrayan extract, which has high antioxidant activity. Regarding sensory qualities, the covered strawberries did not show significant differences from the uncoated samples, with an overall acceptance of 7.64 on a 9-point scale. To our knowledge, this is the first time an edible coating enriched with Arrayan extracts has been reported as able to prevent strawberries' decay and spoilage.

The potential of curcumin-based co-delivery systems for applications in the food industry: Food preservation, freshness monitoring, and functional food

Currently, curcumin-based co-delivery systems are receiving widespread attention. However, a systematic summary of the possibility of curcumin-based co-delivery systems used for the food industry from multiple directions based on the functional characteristics of curcumin is lacking. This review details the different forms of curcumin-based co-delivery systems including the single system of nanoparticle, liposome, double emulsion, and multiple systems composed of different hydrocolloids. The structural composition, stability, encapsulation efficiency, and protective effects of these forms are discussed comprehensively. The functional characteristics of curcumin-based co-delivery systems are summarized, involving biological activity (antimicrobial and antioxidant), pH-responsive discoloration, and bioaccessibility/bioavailability. Correspondingly, potential applications for food preservation, freshness detection, and functional foods are introduced. In the future, more novel co-delivery systems for active ingredients and food matrices should be developed. Besides, the synergistic mechanisms between active ingredients, delivery carrier/active ingredient, and external physical condition/active ingredient should be explored. In conclusion, curcumin-based co-delivery systems have the potential to be widely used in the food industry.

A polylactide based multifunctional hydrophobic film for tracking evaluation and maintaining beef freshness by an electrospinning technique

A nanofiber film was prepared by a facile electrospinning technique using polylactide (PLA), butterfly pea flower extract (BPA) and cinnamaldehyde (CIN). The as-prepared film shows the prominent antioxidative, antibacterial, colorimetric and hydrophobic properties so that the beef freshness can be monitored and maintained up to 6 days at 4 °C simultaneously. Besides, the nanofiber structure endows the film with a fast color responsiveness under acidic-alkaline atmospheres with different concentrations. Moreover, this film exhibits higher tensile strength (9.56 Mpa) than that of the pure PLA electrospinning film (4.40 Mpa). Especially the introduction of the BPA effectively boosts the antimicrobial ability of the CIN. The freshness, sub-freshness and spoilage levels of the beef can be easily testified by observing the color difference change of the film. So the polylactide based multifunctional film as an intelligent packaging has an excellent potential for the sub-freshness detection of meat.

Preparation of pH-Responsive Films from Polyvinyl Alcohol/Agar Containing Cochineal for Monitoring the Freshness of Pork

This study reported the production of pH-responsive films based on 8 wt% polyvinyl alcohol solution/0.2 wt% agar solution incorporated with cochineal-loaded starch particles (CSN) (2, 4, 6 and 8 wt% on agar basis) by a casting process. Results revealed that CSN presented obvious color changes over the pH range of 2-12. FTIR, XRD spectra and SEM micrographs presented that the incorporation of CSN formed new hydrogen bonds with a matrix and a tighter network structure. A certain improvement was observed in the color stability, swelling index and functional properties (antimicrobial and antioxidant activities) but water solubility, water vapor permeability and water contact angle of the pH-responsive films were decreased by the addition of CSN. The release of cochineal was a rate-limiting step following the Korsmeyer-Peppas model. The agar/polyvinyl alcohol film containing 6% CSN (PVA/GG-6) exhibited the best sensitivity for ammonia detection and its limit of detection was 35.4 ppm (part per million) for ammonia. The application trials showed that the PVA/GG-6 film presented different color changes for pork freshness. Hence, these pH-responsive films can be used as potential packaging materials for tracking the freshness of protein-rich fresh food in a non-destructive way.

Cellulose/Salep-based intelligent aerogel with red grape anthocyanins: Preparation, characterization and application in beef packaging

The purpose of this study was to prepare a porous intelligent aerogel for food packaging applications, in particular for monitoring minced beef freshness, using cellulose extracted from grape stalk, Salep as a copolymer, and red grape anthocyanins as a pH-sensitive pigment. Aerogels based on cellulose 1% (w/v) and Salep 1% (w/v) at ratios of 1:3, 3:1, and 1:1 were prepared by lyophilization. Aerogel with high porosity, low density, and higher mean pore size was chosen for preparing intelligent colorimetric aerogel (ICA) with the addition of 0.44 mg/100 mL of anthocyanins. Based on the color parameters, the stability of ICA was satisfactory when exposed to both light and dark conditions, as well as when stored at either 4 or 25 °C. Additionally, X-ray diffraction and thermogravimetric analyses indicated that an amorphous aerogel was formed, with a thermal decomposition temperature of 320 °C. The color of the ICA changed from purple on the first and 3rd days of packaging to blue-gray on the 6th day. As the spoilage process continued, the color of the indicator became dark brown. Taken together, ICA showed a quick response to minced beef spoilage with the ability to differentiate between fresh and spoiled meat during storage at 4 °C.

Betalains as promising natural colorants in smart/active food packaging

Betalains are water-soluble nitrogen pigments with beneficial effects, including antioxidant, antimicrobial, and pH-indicator properties. The development of packaging films incorporated with betalains has received increasing attention because of pH-responsive color-changing properties in the colorimetric indicators and smart packaging films. As such, intelligent and active packaging systems based on biodegradable polymers containing betalains have been recently developed as eco-friendly packaging to enhance the quality and safety of food products. Betalains could generally improve the functional properties of packaging films, such as higher water resistance, tensile strength, elongation at break, and antioxidant and antimicrobial activities. These effects are dependent on betalain composition (about its source and extraction), content, and the kind of biopolymer, film preparation method, food samples, and storage time. This review focused on betalains-rich films as pH- and ammonia-sensitive indicators and their applications as smart packaging to monitor the freshness of protein-rich foods such as shrimp, fish, chicken, and milk.

Alginate/Pectin Film Containing Extracts Isolated from Cranberry Pomace and Grape Seeds for the Preservation of Herring

Alginate/pectin films supplemented with extracts from cranberry pomace (CE) or grape seeds (GE) were developed and applied to herring fillets that were stored for 18 days at 4 °C. Herring coated with films containing GE and CE inhibited the growth of Listeria monocytogenes and Pseudomonas aeruginosa during the storage period, whereas pure alginate/pectin films did not show an antimicrobial effect against the tested pathogens. The application of alginate/pectin films with CE and GE minimised pH changes and inhibited total volatile basic nitrogen (TVN) and the formation of thiobarbituric acid-reactive substances (TBARS) in the herring fillets. The coating of herring fillets with films with CE or GE resulted in three- and six-fold lower histamine formation and one-and-a-half- and two-fold lower cadaverine formation, respectively, when compared to unwrapped herring samples after 18 days of storage. The incorporation of 5% extracts isolated from cranberry pomace or grape seeds into the alginate/pectin film hindered herring spoilage due to the antimicrobial and antioxidant activity of the extracts.

Preparation of an indicator film based on pectin, sodium alginate, and xanthan gum containing blueberry anthocyanin extract and its application in blueberry freshness monitoring

An active pH-sensitive film based on pectin-sodium alginate-xanthan gum composite film (PAX) was prepared, containing blueberry anthocyanin extract (BAEs), to monitor the freshness of blueberries. The effects of different contents of BAEs on the microstructure and physical properties of intelligent polysaccharide films were comprehensively evaluated. It was found that 75-BAEs-PAX film had a solid response to pH value and showed different and easily distinguishable colors at different pH values. In addition, when the freshness of blueberries stored at different temperatures (-1 °C, 4 °C, 10 °C, 15 °C, 25 °C) was monitored, the color of 75-BAEs-PAX film changed from purple to light pink from neutral to acidic environment, which was consistent with the change of pH value of blueberries from fresh to spoilage. The Arrhenius equation verified that the difference between the activation energy of the indicator film and the blueberry quality was less than 25 kJ/mol. Therefore, the 75-BAEs-PAX film can be used as an indicator film for blueberries freshness monitoring. In this study, the freshness of blueberries was monitored by BAEs, and the purpose of using ontology to monitor ontology was achieved. The freshness of blueberries was visualized during storage and transportation, which could effectively reduce the waste of blueberries. In the future, the method of ontology monitoring ontology could be extended to other foods.

Novel ammonia-responsive carboxymethyl cellulose/Co-MOF multifunctional films for real-time visual monitoring of seafood freshness

Nowadays, ammonia-responsive biopolymer-based intelligent active films are of great interest for their huge potential in maintaining and monitoring the freshness of seafood. However, it is still a challenge to create biopolymer-based intelligent active films with favorable color stability, antibacterial and visual freshness indication functions. Herein, cobalt-based metal-organic framework (Co-MOF) nanosheets with ammonia-sensitive and antibacterial functions were successfully synthesized and then embedded into carboxymethyl cellulose (CMC) matrix to develop high performance and multifunctional CMC-based intelligent active films. The influence of Co-MOF addition on the structure, physical and functional characters of CMC film was comprehensively studied. The results showed that the Co-MOF nanofillers were homogeneously embedded within the CMC matrix, bringing about remarkable promotion on tensile strength (from 45.3 to 62.2 MPa), toughness (from 0.7 to 2.3 MJ/m³), water barrier and UV-blocking performance of CMC film. Notably, the obtained CMC/Co-MOF nanocomposite films also presented excellent long-term color stability, antibacterial activity (with the bacteriostatic efficiency of 99.6 % and 99.3 % against Escherichia coli and Staphylococcus aureus), and ammonia-sensitive discoloration performance. Finally, the CMC/Co-MOF nanocomposite films were successfully applied for real-time visual monitoring of shrimp freshness. The above results demonstrate that the CMC/Co-MOF nanocomposite films possess huge potential applications in intelligent active packaging.

Innovative processes in smart packaging. A systematic review

Smart packaging provides one possible solution that could reduce greenhouse gas emissions. In comparison with traditional packaging, which aims to extend the product's useful life and to facilitate transport and marketing, smart packaging allows increased efficiency, for example by ensuring authenticity and traceability from the product's origin, preventing fraud and theft, and improving security. Consequently, it may help to reduce pollution, food losses, and waste associated with the food supply chain. However, some questions must be answered to fully understand the advantages and limitations of its use. What are the most suitable smart packaging technologies for use in agro-industrial subsectors such as meat, dairy, fruits, and vegetables, bakery, and pastry? What are the opportunities from a perspective of life extension, process optimization, traceability, product quality, and safety? What are the future challenges? An up-to-date, systematic review was conducted of literature relevant to the application of indicator technologies, sensors, and data carriers in smart packaging, to answer these questions. © 2022 Society of Chemical Industry.

Research Progress on Absorption, Metabolism, and Biological Activities of Anthocyanins in Berries: A Review

Berries, as the best dietary sources for human health, are rich in anthocyanins, vitamins, fiber, polyphenols, essential amino acids, and other ingredients. Anthocyanins are one of the most important bioactive components in berries. The attractive color of berries is attributed to the fact that berries contain different kinds of anthocyanins. Increasing research activity has indicated that anthocyanins in berries show various biological activities, including protecting vision; antioxidant, anti-inflammatory and anti-tumor qualities; inhibition of lipid peroxidation; anti-cardiovascular disease properties; control of hypoglycemic conditions; and other activities. Hence, berries have high nutritional and medicinal values. The recognized absorption, metabolism, and biological activities of anthocyanins have promoted their research in different directions. Hence, it is necessary to systematically review the research progress and future prospects of anthocyanins to promote a better understanding of anthocyanins. The absorption, metabolism, and biological activities of anthocyanins from berries were reviewed in this paper. The findings of this study provide an important reference for basic research, product development and utilization of berries' anthocyanins in food, cosmetics, and drugs.

Pectin-based color indicator films incorporated with spray-dried Hibiscus extract microparticles

Colorimetric films incorporated with anthocyanins as an indicator for freshness monitoring have aroused growing interest recently. The pH-sensing colorimetric film were developed based on pectin (HM), containing aqueous hibiscus extract microparticles (HAE). HAE microparticles were obtained by spray drying with different wall materials (Inulin -IN, maltodextrin- MD and their combination). The films were obtained on large scale by continuous casting. These films were characterized for physicochemical analysis, morphological structure, thermal and barrier properties, antioxidant activity, and color change at different pH. The addition of HAE microparticles caused relevant changes to HM-based films, such as in mechanical behavior and improved barrier property (11-22% WVTR reduction) depending on the type of wall material used and the concentration added. It was verified with the thermal stability of films, with a slight increase being observed. The color variation of smart films was entirely pH-dependent. Overall, the proposed color indicator films showed unique features and functionalities and could be used as an alternative natural pH indicator in smart packaging systems.

Development of an Indicator Film Based on Cassava Starch-Chitosan Incorporated with Red Dragon Fruit Peel Anthocyanin Extract

The increase in new technology and consumer demand for healthy and safe food has led to the development of smart packaging to help consumers understand food conditions in real time. The incorporation of red dragon fruit peel anthocyanin into cassava starch and chitosan films was used in this study as a color indicator to monitor food conditions. This indicator film was generated using the solvent-casting method. The mechanical, morphological, and physicochemical characterizations of the film were studied, and food freshness monitoring was carried out. The results showed that adding red dragon fruit peel anthocyanin increased up to 94.44% of the antioxidant activity. It also improved its flexibility, indicated by the lowest tensile strength (3.89 ± 0.15 MPa) and Young's modulus (0.14 ± 0.01 MPa) and the highest elongation at break (27.62 ± 0.57%). The indicator film was sensitive to pH, which was indicated by its color change from red to yellow as pH increased. The color of the film also changed when it was used to test the freshness of packaged shrimp at both room and chiller temperatures. According to the results, the indicator film based on cassava starch-chitosan incorporated with red dragon fruit peel anthocyanin showed its potential as a smart packaging material.

Colorimetric Indicators Based on Anthocyanin Polymer Composites: A Review

This review explores the colorimetric indicators based on anthocyanin polymer composites fabricated in the last decade, in order to provide a comprehensive overview of their morphological and compositional characteristics and their efficacy in their various application fields. Notably, the structural properties of the developed materials and the effect on their performance will be thoroughly and critically discussed in order to highlight their important role. Finally, yet importantly, the current challenges and the future perspectives of the use of anthocyanins as components of colorimetric indicator platforms will be highlighted, in order to stimulate the exploration of new anthocyanin sources and the in-depth investigation of all the possibilities that they can offer. This can pave the way for the development of high-end materials and the expansion of their use to new application fields.