Phytoremediation of methylene blue using duckweed (Lemna minor)

Harnessing native bacterial consortium to boost duckweed biomass and chromium removal from batik industry effluents

Batik industry is one of the largest contributors to chromium hexavalent (Cr(VI)) pollution due to the dying and pigmenting process. Remediation agents such as duckweed and bacteria have been commonly used to treat wastewater (WW)-containing Cr(VI). This study utilized native bacterial consortium from the batik WW environment to enhance duckweed growth and Cr(VI) removal. Among the formulated consortia, consortium G4 showed the highest growth promotion on duckweed in WW by 1.3 to 2-fold, while other consortia showed a contrasting result. Additionally, duckweed chromium uptake in WW reached 74 % after 12 days when applied with G4. Consortium G4 features two plant growth-promoting bacteria, Enterobacter mori TALD 1.2 and Enterobacter cloacae TALA 5, along with two chromium-reducing bacteria, Lysinibacillus fusiformis TALA 1.1 and Bacillus thuringiensis TA1. Several combinations of the G4 members were also tested for chromium reduction activity in an NB medium containing 100 mg L-1 Cr(VI). The original G4 combination showed the fastest Cr(VI) removal, achieving an 81.93 % Cr(VI) reduction within 48 h and a 99 % reduction within 105 h. Interestingly, combining only the chromium-reducing bacteria TALA 1.1 and TA 1 significantly reduced chromium reduction activity and bacterial growth, possibly due to carbon source competition. Thus, the complete members of consortium G4 enhance cross-feeding, with each species playing a vital role in improving interspecies interactions and aiding in chromium reduction. This study underscores the importance of designing a specific and compatible consortium to collaborate with duckweed, offering insights into environmental management practices for other contaminated sites.

Bioremediation technologies for remediation of dyes from wastewater

The colored dyes are extensively applied in diverse industrial setups such as textiles, paper, leather, and cosmetics. The unutilized dyes are released in the waste and pose a serious menace to the environment, ecological balance, and human health. Because of their chemical nature, they are extremely resistant to common methods of treatment and often persist in the aquatic environment. A sustainable and eco-friendly approach for treating dye-contaminated wastewater is "bioremediation." This manuscript aims to discuss the exclusive role of diversified microorganisms and plants, immobilized microbial cells/enzymes, microbial consortia, nanomaterials, and combination approaches in the bioremediation of dyes. It also provides a comprehensive understanding of different bio-remedial technologies used to remove dyes from wastewater. In addition, the underlying mechanisms affecting the efficacy of bio-remedial technologies, the latest breakthroughs, challenges, and potential solutions in scaling up, and prospects in this area are also explored. We also detail the noteworthiness of genetic engineering in different bioremediation technologies to solve the issues associated with dye contamination in wastewater and its removal from the environment.

Physiological and biomolecular interventions in the bio-decolorization of Methylene blue dye by Salvinia molesta D. Mitch

Methylene blue, a cationic dye as a pollutant is discharged from industrial effluent into aquatic bodies. The dye is biomagnified through the food chain and is detrimental to the sustainability of aquatic flora. Despite of number of physico-chemical techniques of dye removal, the use of aquatic flora for bio-adsorption is encouraged. Thus, we used Salvinia molesta D. Mitch in bio-reduction of methylene blue on concentrations of 0, 10, 20, and 30 mg L-1 through 5 days with biosorption kinetics. The dye removal was concentration-dependent, maximized at 2 days with 30 mg L-1 which altered the relative growth rate (44%) of plants. Biosorption recorded 71% capacity at optimum pH (8.0), 24 h reducing major bond energies of amide, hydroxyl groups, etc. Bioaccumulation of dye changed potassium content (446%) under maximum dye concentration modifying tissues for dye sequestration. Reactive oxygen species were altered on dye reduction by oxidase (33%) with redox homeostasis by enzymes. Plants altered the metabolism with over accumulation of polyamines (51%), abscisic acids (448%), and phosphoenolpyruvate carboxylase (83%) on dye reduction. Thus, this study is rationalized with a sustainable approach where aquatic ecosystems can be decontaminated from dye toxicity with the exercise of bioresources like Salvinia molesta D. Mitch as herein.

Effect of the number of Cyperus rotundus and medium height on the performance of batch-constructed wetland in treating aquaculture effluent

Increasing aquaculture cultivation produces large quantities of wastewater. If not handled properly, it can have negative impacts on the environment. Constructed wetlands (CWs) are one of the phytoremediation methods that can be applied to treat aquaculture effluent. This research was aimed at determining the performance of Cyperus rotundus in removing COD, BOD, TSS, turbidity, ammonia, nitrate, nitrite, and phosphate from the batch CW system. Treatment was carried out for 30 days with variations in the number of plants (10, 15, and 20) and variations in media height (10, 12, and 14 cm). The result showed that aquaculture effluent contains high levels of organic compounds and nutrients, and C. rotundus can grow and thrive in 100% of aquaculture effluent. Besides that, the use of C. rotundus in CWs with the effect of numbers of plants and media height showed performance of COD, BOD, TSS, turbidity, ammonia, nitrate, nitrite, and phosphate with 70, 79, 90, 96, 64, 82, 92, and 48% of removal efficacy, respectively. There was no negative impact observed on C. rotundus growth after exposure to aquaculture effluent, as indicated by the increase in wet weight, dry weight, and growth rate when compared to the control. Thus, adding aquaculture effluent to CWs planted with C. rotundus supports the growth and development of plants while also performing phytoremediation.

Recent Strategies for the Remediation of Textile Dyes from Wastewater: A Systematic Review

The presence of dye in wastewater causes substantial threats to the environment, and has negative impacts not only on human health but also on the health of other organisms that are part of the ecosystem. Because of the increase in textile manufacturing, the inhabitants of the area, along with other species, are subjected to the potentially hazardous consequences of wastewater discharge from textile and industrial manufacturing. Different types of dyes emanating from textile wastewater have adverse effects on the aquatic environment. Various methods including physical, chemical, and biological strategies are applied in order to reduce the amount of dye pollution in the environment. The development of economical, ecologically acceptable, and efficient strategies for treating dye-containing wastewater is necessary. It has been shown that microbial communities have significant potential for the remediation of hazardous dyes in an environmentally friendly manner. In order to improve the efficacy of dye remediation, numerous cutting-edge strategies, including those based on nanotechnology, microbial biosorbents, bioreactor technology, microbial fuel cells, and genetic engineering, have been utilized. This article addresses the latest developments in physical, chemical, eco-friendly biological and advanced strategies for the efficient mitigation of dye pollution in the environment, along with the related challenges.

Encapsulation of Pseudomonas aeruginosa strain KBN12 decolourizes and bioremediates brilliant blue dye mediated toxicity in mung bean (Vigna radiata L.)

AIM

The aim of this study was to explore the decolourization and bioremediation ability of non-encapsulated and encapsulated Pseudomonas aeruginosa (strain KBN 12) against the azo dye brilliant blue (BB).

METHODS AND RESULTS

Six efficient BB dye-decolourizing bacteria were isolated from textile dye effluent. The most efficient free cells of P. aeruginosa KBN 12 along with the optimized conditions such as carbon source (maltose: 5 g L-1), and nitrogen source (ammonium chloride: 4 g L-1) at pH 6 at 37°C decolourized 72.69% of BB dye aerobically after 9 days of incubation under static conditions. Encapsulated (calcium alginate) P. aeruginosa KBN 12 decolourized 87.67% of BB dye aerobically after 9 days of incubation under the same optimized conditions. Fourier-transform infrared spectroscopy (FTIR) and gas chromatography (GC) analysis of the chemical structure of BB dye after decolourization found changes in functional and chemical groups. Phytotoxicity and soil respiration enzyme assays revealed that the decolourized dye or dye products were less toxic than the pure BB dye.

CONCLUSION

The encapsulation of P. aeruginosa KBN 12 proved to be an effective method for BB dye decolourization or remediation.

Gamma irradiation effect on photocatalytic properties of Cu and Sr ions codoped PbS

Gamma-irradiation effects on photocatalytic action of PbS nanocrystallites codoped with Cu and Sr ions were performed for organic dye degradation. The physical and chemical characterizations of these nanocrystallites were examined employing X-ray diffraction, Raman, and field emission electron microscopic analysis. The optical bandgaps of gamma-irradiated PbS with co-dopants have shifted from 1.95 eV (pristine PbS) to 2.45 eV in the visible spectrum. Under direct sunlight, the photocatalytic action of these compounds against methylene blue (MB) was investigated. Observations indicated that gamma-irradiated Pb_(0.98)Cu_0.01Sr_0.01S nanocrystallite sample exhibits a higher photocatalytic degradation activity of 74.02% in 160 min and stability of 69.4% after three cycles, suggesting that gamma irradiation could potentially influence organic MB degradation. This is due to combined action of high-energy gamma irradiation (at an optimzed dose), which causes sulphur vacancies, and defects created by dopant ions, which alter the crystal structure by inducing strain in the crystal lattice, hence altering the crystallinity of PbS.

Application of Salvinia sps. in remediation of reactive mixed azo dyes and Cr (VI) - Its pathway elucidation

The emerging industrialization has resulted in the rapid growth of textile industries across the globe. The presence of xenobiotic pollutants in textile wastewater threatens the ecosystem. Applying different microbes (bacteria, fungi & algae) has paved the way for phytoremediation - the eco-friendly, cost-effective method. The present study focuses on the phytoremediation of reactive dyes - Reactive red, Reactive Brown & Reactive Black and Cr (VI) in synthetic textile wastewater using Salvinia sps. The mixed azo dyes of each 100 mg/L showed decolourization of 75 ± 0.5% and 82 ± 0.5% of removal of 20 mg/L of Cr (VI) after eight days of incubation in a phytoreactor setup. Chlorophyll analysis revealed the gradual decrease in the photosynthetic pigments during the remediation. The degraded metabolites were analyzed using FT-IR and showed the presence of aromatic amines on day zero, which were converted to aliphatic amines on day four. The GC-MS analysis revealed the disruption of -NN- bond, rupture of -CN- bond, scission of -N-N-bond, and loss of -SO₃H from the Reactive Black dye leading to the formation of an intermediate p-Hydroxy phenylhydrazinyl. The rupture of Reactive red dye resulted in the formation of p-Hydrazinyl toluene sulphonic acid, Naphthyl amine -3,6-disulphonic acid and 8-Hydroxy Naphthyl amine -3,6-disulphonic acid. Decarboxylation, desulphonation, deoxygenation and deamination of Reactive Brown dye showed the presence of different metabolites and metabolic pathways were proposed for the reactive azo dyes which were phytoremediated.

Potential of Lemna minor and Eichhornia crassipes for the phytoremediation of water contaminated with Nickel (II)

Phytoextraction of Nickel (II) in water by two types of aquatic macrophytes (Lemna minor and Eichhornia crassipes) was investigated using synthetic aqueous solutions of NiSO₄ at concentrations of 0.5, 1.5 and 2.5 mg/L. The toxic effects of nickel salt in plants were evaluated through the presence of necrosis and chlorosis. The bioconcentration factor, Nickel (II) removal efficiency and kinetics of removal were also calculated. Results of this study show bioconcentration factors higher than 1000, which categorize L. minor and E. crassipes as hyperaccumulators. Besides, L. minor presented a removal percentage higher than 68%, compared to E. crassipes that did not exceed 50% in any of the three concentrations studied. However, E. crassipes showed better resistance to the effects of nickel and obtained a greater removal capacity during the phytoremediation process that lasted for 10 days. In contrast, L. minor suffered necrosis and chlorosis in a concentration-dependent way. Consequently, both macrophytes are sustainable alternatives for nickel removal from contaminated water.

Electrochemical Degradation of Methylene Blue by a Flexible Graphite Electrode: Techno-Economic Evaluation

In this study, electrochemical removal of methylene blue (MB) from water using commercially available and low-cost flexible graphite was investigated. The operating conditions such as initial dye concentration, initial solution pH, electrolyte dose, electrical potential, and operating time were investigated. The Box-Behnken experimental design (BBD) was used to optimize the system's performance with the minimum number of tests possible, as well as to examine the independent variables' impact on the removal efficiency, energy consumption, operating cost, and effluent MB concentration. The electrical potential and electrolyte dosage both improved the MB removal efficiency, since increased electrical potential facilitated production of oxidizing agents and increase in electrolyte dosage translated into an increase in electrical current transfer. As expected, MB removal efficiency increased with longer operational periods. The combined effects of operating time-electrical potential and electrical potential-electrolyte concentration improved the MB removal efficiency. The maximum removal efficiency (99.9%) and lowest operating cost (0.012 $/m³) were obtained for initial pH 4, initial MB concentration 26.5 mg/L, electrolyte concentration 0.6 g/L, electrical potential 3 V, and operating time 30 min. The reaction kinetics was maximum for pH 5, and as the pH increased the reaction rates decreased. Consequent techno-economic assessment showed that electrochemical removal of MB using low-cost and versatile flexible graphite had a competitive advantage.

Application of duckweed (Lemna sp.) and water fern (Azolla sp.) in the removal of pharmaceutical residues in water: State of art focus on antibiotics

In recent decades, antibiotic residues in the environment have increased, affecting components of biological communities, from bacteria to plants and animals. Different methods have been used to remove these compounds, including phytoremediation with floating aquatic species such as duckweed and aquatic fern, with positive results. This study analyses information about the removal efficiency of drugs, with a focus on antibiotics, using Lemna and Azolla, which will allow a better understanding of phytoremediation processes from the perspective of plant physiology. The physiological processes of macrophytes in an environment with this type of pollutant and the phytotoxic effects on plants at high concentrations are also analysed. The metabolization of toxic compounds occurs in three phases: phase I begins with the absorption of antibiotics and the secretion of reactive oxygen species (ROS); in phase II, the effects of ROS are neutralized and minimized by conjugation with enzymes such as glutathione transferase or metabolites such as glutathione; and phase III culminates with the storage of the assimilated compounds in the vacuoles, apoplast and cell wall. In this way, plants contribute to the removal of toxic compounds. In summary, there is sufficient scientific evidence on the efficiency of the elimination of pharmaceutical compounds by these floating macrophytes at the laboratory scale, which indicates that their application under real conditions can have good results.

Enhanced photocatalytic potential of TiO2 nanoparticles in coupled CdTiO2 and ZnCdTiO2 nanocomposites

Photodegradation of organic pollutants is the most suitable and cheaper technique to counter decontamination issues. Among the metal-based nanoparticles, TiO₂ is considered to be the most effective heterogeneous photocatalyst for the photodegradation of organic pollutants. However, the large band gap and the high electron-hole pair recombination rate limit its practical applications. Herein, an approach was introduced to minimize the mentioned limitations by preparing CdTiO₂ and ZnCdTiO₂ nanocomposites by co-precipitation method. The as-synthesized TiO₂, CdTiO₂, and ZnCdTiO₂ were characterized by scanning electron microscopy, transmission electron microscopy (TEM), energy dispersive X-ray, X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and UV-visible spectrophotometry. Morphological analysis revealed that TiO₂ are mostly agglomerated with different shapes and sizes and the nanocomposites are mostly in dispersed form. The components of the nanocomposites are strongly intercalated in the ternary nanocomposite as confirmed from TEM analysis. XRD analysis confirmed the anatase TiO₂ while the UV-visible analysis showed the shifting toward higher wavelength. The band gap energy of TiO₂ (2.65) decreased to 2.6 and 2.56 eV for CdTiO₂ and ZnCdTiO₂, respectively. BET analysis has shown a 47.2 m²/g surface area for the ternary ZnCdTiO₂ nanocomposite. The photodegradation results revealed that TiO₂, CdTiO₂, and ZnCdTiO₂ degraded about 74%, 86%, and 97.61% methylene blue dye, respectively, within 2 h. Maximum photodegradation is achieved in the basic medium and the ternary ZnCdTiO₂ nanocomposite degraded 98% dye at pH 10.

Modeling and optimization of biodegradation of methylene blue by Staphylococcus aureus through a statistical optimization process: a sustainable approach for waste management

Bacterial species for metabolizing dye molecules were isolated from textile wastewater. The best microbial species for such an application was selected amongst the isolated bacterial populations by conducting methylene blue (MB) batch degradation studies with the bacterial strains. The most suitable bacterial species was Staphylococcus aureus (S. aureus). Process parameters were optimized using Full Factorial Design (FFD) and under the optimum conditions (pH of 5, temperature of 35 °C, 150 ppm, and time of 8 h). Response Surface Methodology (RSM) modeling technique was applied to model the process and their performance and predictive capabilities of the response (removal efficiency) was also examined. When tested with 20 ppm dye using batch reactors, the maximum COD and color removal efficiencies, were found to be 88% and 98%, respectively. Our results showed that Staphylococcus aureus had a high decolorization capacity. UV-Visible and Fourier-transform infrared (FTIR) spectroscopy analysis confirmed the biodegradation of MB. Using phytotoxicity and mutagenicity endpoints, toxicological studies of MB before and after biodegradation were studied. Toxicity assay signaled that biodegradation led to the detoxification of MB dye.

Comparative performance of Scirpus grossus for phytotreating mixed dye wastewater in batch and continuous pilot subsurface constructed wetland systems

Dye is one of the pollutants found in water bodies because of the increased growth of the textile industry. In this study, Scirpus grossus was planted inside a constructed wetland to treat mixed dye (methylene blue and methyl orange)-containing wastewater under batch and continuous modes. The plants were exposed to various concentrations (0, 50, 75, and 100 mg/L) of mixed dye for 72 days (with hydraulic retention time of 7 days for the continuous system). Biological oxygen demand, chemical oxygen demand, total organic carbon, pH, temperature, ionic content, and plant growth parameters were measured. Results showed that S. grossus can withstand all the tested dye concentrations until the end of the treatment period. Color removal efficiencies of 86, 84, and 75% were obtained in batch mode, whereas 90%, 85%, and 79% were obtained in continuous mode for 50, 75, and 100 mg/L dye concentrations, respectively. Fourier-transform infrared analysis confirmed the transformation of dye compounds after treatment and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis showed that most of the intermediate compounds were not absorbed into plants but adsorbed onto the surface of the root structure.

A feasibility study for the treatment of 1,2-dichloroethane-contaminated groundwater using reedbed system and assessment of its natural attenuation

A reedbed system planted with Phragmites australis was implemented to treat chlorinated hydrocarbon-contaminated groundwater in an industrial plant area. Reedbed commissioning was conducted from July 2016 to November 2016 to treat contaminated groundwater via a pump-and-treat mechanism. Combination of horizontal and vertical reedbed systems was applied to treat 1,2-dichloroethane (1,2 DCA) under four parallel installations. The 2-acre horizontal and vertical reedbed systems were designed to treat approximately 305 m³/day of pumped groundwater. Initial concentration of 1,2 DCA was observed at 0.362 mg/L to 4320 mg/L, and the reedbed system successfully reduced the concentration up to 67.9%. The average outlet concentration was measured to be 2.08 mg/L, which was lower than the site-specific target level of 156 mg/L. Natural attenuation analysis was conducted using first-order decay kinetics, showing an average natural attenuation rate of 0.00372/year. Natural attenuation of 1,2 DCA was observed in shallow monitoring wells, which was indicated by the reduction trend of 1,2 DCA concentration, thereby confirming that the reedbed system worked well to remove 1.2 DCA from contaminated groundwater at the shallow profile.

Integrated emergent-floating planted reactor for textile effluent: Removal potential, optimization of operational conditions and potential forthcoming waste management strategy

Native emergent and floating plants; local reed grass (Phragmites karka) and water hyacinth (Eichhornia crassipes), respectively, were used to treat textile wastewater using an integrated emergent-floating planted reactor (IEFPR) system at hydraulic retention times (HRTs) of 8, 14, and 19 days. Real textile effluent having characteristics of 1686.3 ADMI for colour, 535 mg/L for total suspended solid (TSS), 647.7 mg/L for chemical oxygen demand (COD) and 124 mg/L for biochemical oxygen demand (BOD) was used throughout this study. The IEFPR system experienced maximum removal of colour (94.8%, HRT 14 days, day 3), TSS (92.7%, HRT 19 days, day 7), and COD (96.6%, HRT 8 days, day 5) at different HRT and exposure time. The process conditions (HRT and exposure time) were optimized for maximum colour, TSS and COD removal from textile effluent by employing response surface methodology (RSM). The optimization has resulted 100% removal of colour, 87% removal of TSS and 100% removal of COD at HRT of 8 days and exposure time of 5 days, with 0.984 desirability. The integrated plant-assisted treatment system showed reliable performance in treating textile wastewater at optimum operational conditions to improve effluent quality before disposal into water bodies or being recycled into the process. The potential of phytoremediator (produced plant biomass) to be utilized as resources for bioenergy or to be converted into value added products (adsorbent or biochar) provides an alternative to management strategy for better environmental sustainability.

DNA dyes: toxicity, remediation strategies and alternatives

Release of untreated effluent from processing or manufacturing industries and other commercial premises into water bodies is a major threat to environment and human health. In this regard, the effluent generated from laboratories and other research facilities is of great concern. Among other harmful chemicals, the effluent is rich in toxic organic dyes, which get exposed to the environment and pose serious health risk. The dyes used in nucleic acid analysis specially the DNA dyes are known for their teratogenicity and mutagenic potential, which mainly depends upon the organism and circumstances under which it is exposed. Among animals and humans, exposure to theses dyes may lead to irritation in mouth, eyes and respiratory tract and many other possible effects which are yet to be explored. To overcome these problems, dyes present in the effluents from laboratories must be degraded to non-toxic forms. Various strategies have been proposed and investigated for degradation and remediation of contaminated laboratory effluent. As a modern and cost-effective technique, biodegradation using microbes and plants is potentially eco-friendly and sustainable technique for detoxifying these dyes. In this article, we have discussed and reviewed the structure, properties and toxicity profile of prominent nucleic acid dyes, along with the strategies of remediation of laboratory effluents contaminated with these dyes. In addition, we have also discussed the feasibility and limitations of these remediation strategies and identified research gaps that can help researchers to explore more effective solutions to manage this area of great concern. We have also reviewed various less toxic alternatives of these common as safer options of these dyes.

Lead (Pb) removal from contaminated water using constructed wetland planted with Scirpus grossus: Optimization using response surface methodology (RSM) and assessment of rhizobacterial addition

Lead (Pb) is one of the toxic heavy metals that pollute the environment as a result of industrial activities. This study aims to optimize Pb removal from water by using horizontal free surface flow constructed wetland (HFSFCW) planted with Scirpus grossus. Optimization was conducted using response surface methodology (RSM) under Box-Behnken design with the operational parameters of initial Pb concentration, retention time, and aeration. Optimization results showed that 37 mg/L of initial Pb concentration, 32 days of retention time, and no aeration were the optimum conditions for Pb removal by using the systems. Validation test was run under two different conditions, namely, non-bioaugmented and bioaugmented with rhizobacteria (Bacillus cereus, B. pumilus, B. subtilis, Brevibacillus choshinensis, and Rhodococcus rhodochrous). Results of the validation test showed that Pb removal in water achieved 99.99% efficiency with 0.2% error from the RSM prediction, while the adsorption of Pb by plants reached 5160.18 mg/kg with 10.6% error from the RSM prediction. The bioaugmentation of the five rhizobacterial species showed a slight improvement in Pb removal from water and Pb adsorption by plants. However, no significant improvement was achieved (p < 0.05). Overall results suggested that operating the HFSFCW under optimum conditions with no bioaugmentation might be a feasible choice for the treatment of Pb-contaminated water.

Construction and implementation of floating wetpark as effective constructed wetland for industrial textile wastewater treatment

Fimbristylis dichotoma, Ipomoea aquatica, Pluchea tomentosa and their co-plantation (consortium FIP) autonomously degrade Orange 3R. Consortium FIP showed 84% removal of Orange 3R within 48 h, which is a higher dye elimination rate than individual plant systems. Oxidoreductase enzymes like tyrosinase (76%), varatryal alcohol oxidase (85%), lignin peroxidase (150%), riboflavin reductase (151%), laccase (171%), NADH-DCIP reductase (11%) and azo reductase (241%) were expressed in consortia FIP during Orange 3R degradation. UV-vis spectroscopy, enzyme activities, HPTLC, FTIR and GC-MS confirmed mineralization of Orange 3R into its metabolites. Microscopic investigation of root tissue revealed the harsh effect of dye on root tissues. Toxicity assessment on the HepG2 cell line demonstrated the toxic nature of Orange 3R, which gets reduced after phyto-treatment with consortia FIP. Floating wetpark of consortia FIP was found more efficient for the treatment of industrial textile waste and accomplished 87%, 86%, 75%, 49% and 46% removal of COD, BOD, color, TSS and TDS of effluent.

What compound inside biocoagulants/bioflocculants is contributing the most to the coagulation and flocculation processes?

Biocoagulants and bioflocculants are alternative items that can be used to substitute the utilization of common-chemical coagulants and flocculants. Biocoagulants/bioflocculants can be extracted from animals, microorganisms, and plants. Moreover, biocoagulants/bioflocculants have specific characteristics that contribute to the coagulation and flocculation processes. The active compounds inside biocoagulants/bioflocculants vary and correspond to the specific working mechanisms, including charge neutralization, sweep coagulation, adsorption, bridging, and patch flocculation. This review paper summarizes the characteristics of biocoagulants/bioflocculants from different sources and its performance in treating various pollutants. Furthermore, this paper discusses the most contributing compounds and functional groups of biocoagulants/bioflocculants that can be related to their working mechanisms. Several functional groups and compounds in biocoagulants/bioflocculants are highlighted in this review article, as well as the correlation between the highlighted groups/compounds to the aforementioned coagulation-flocculation mechanisms. In addition, current knowledge gaps in the study of biocoagulants/bioflocculants and future approaches that may serve as research directions are also emphasized. This review article is expected to shed information on the characteristics of biocoagulants/bioflocculants, which may then become a focus in the optimization to obtain higher performance in future application of coagulation-flocculation processes.

Preliminary Studies of Methylene Blue Remotion from Aqueous Solutions by Ocimum basilicum

The continuous expansion in the textile industry results in high loads of coloured wastewaters that heavily pollute the limited freshwater sources. Therefore, a wide array of treatment methods has been used to remediate water/wastewater from dyes. One common practice is the use of plants to degrade, absorb, metabolise, and detoxify different types of pollutants, including dyes. This study employs sweet basil (Ocimum basilicum) as a phytoremediation model herb to remove different concentrations (5–25 mg/L) of methylene blue (MB) dye from synthetic water, taking into account the effects of the MB dye concentration (5–25 mg/L) and contact time (up to 10 days). The results showed that the ability of Ocimum basilicum to absorb MB dye decreased with the increase of the MB dye concentration and increased with the increase of the contact time. The best removal of the MB dye was 93% when the concentration of the MB dye was 25 mg/L and the contact time was 10 days. Additionally, it was noticed that the relative growth rate (RGR) of the herbs was adversely influenced by increasing MB dye concentrations and that the best RGR value was 2.2 g/day when the MB dye concentration was 5 mg/L.

Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

The unavailability of clean drinking water is one of the significant health issues in modern times. Industrial dyes are one of the dominant chemicals that make water unfit for drinking. Among these dyes, methylene blue (MB) is toxic, carcinogenic, and non-biodegradable and can cause a severe threat to human health and environmental safety. It is usually released in natural water sources, which becomes a health threat to human beings and living organisms. Hence, there is a need to develop an environmentally friendly, efficient technology for removing MB from wastewater. Photodegradation is an advanced oxidation process widely used for MB removal. It has the advantages of complete mineralization of dye into simple and nontoxic species with the potential to decrease the processing cost. This review provides a tutorial basis for the readers working in the dye degradation research area. We not only covered the basic principles of the process but also provided a wide range of previously published work on advanced photocatalytic systems (single-component and multi-component photocatalysts). Our study has focused on critical parameters that can affect the photodegradation rate of MB, such as photocatalyst type and loading, irradiation reaction time, pH of reaction media, initial concentration of dye, radical scavengers and oxidising agents. The photodegradation mechanism, reaction pathways, intermediate products, and final products of MB are also summarized. An overview of the future perspectives to utilize MB at an industrial scale is also provided. This paper identifies strategies for the development of effective MB photodegradation systems.

Macrophytes as wastewater treatment agents: Nutrient uptake and potential of produced biomass utilization toward circular economy initiatives

Macrophytes have been widely used as agents in wastewater treatment. The involvement of plants in wastewater treatment cannot be separated from wetland utilization. As one of the green technologies in wastewater treatment plants, wetland exhibits a great performance, especially in removing nutrients from wastewater before the final discharge. It involves the use of plants and consequently produces plant biomasses as treatment byproducts. The produced plant biomasses can be utilized or converted into several valuable compounds, but related information is still limited and scattered. This review summarizes wastewater's nutrient content (macro and micronutrient) that can support plant growth and the performance of constructed wetland (CW) in performing nutrient uptake by using macrophytes as treatment agents. This paper further discusses the potential of the utilization of the produced plant biomasses as bioenergy production materials, including bioethanol, biohydrogen, biogas, and biodiesel. This paper also highlights the conversion of plant biomasses into animal feed, biochar, adsorbent, and fertilizer, which may support clean production and circular economy efforts. The presented review aims to emphasize and explore the utilization of plant biomasses and their conversion into valuable products, which may solve problems related to plant biomass handling during the adoption of CW in wastewater treatment plants.

Tolerance and decolorization potential of duckweed (Lemna gibba) to C.I. Basic Green 4

With growing human culture and industrialization, many pollutants are being introduced into aquatic ecosystems. In recent years, dyes have become a major water pollutant used in the manufacture of paints and other production purposes. In this research, the potential of duckweed (Lemna gibba) plant was investigated spectrophotometrically as an obvious bioagent for the biological decolorization of the organic dye C.I. Basic Green 4 (Malachite Green, BG4). Photosynthetic efficiency analysis showed that the photosynthetic apparatus of L. gibba is very tolerant to BG4. Significant induction of reactive oxygen species (ROS) scavenging enzymes was observed after 24h of biodecolorization process in L. gibba treated with 15 and 30 mg/l BG4. The experimental results showed that L. gibba has a strong ability to extract BG4 from contaminated water and the best results were obtained at 25–30°C and pH 8.0. We conclude that duckweed L. gibba can be used as a potent decolorization organism for BG4.

Response and capability of Scirpus mucronatus (L.) in phytotreating petrol-contaminated soil

The greenhouse phytotoxicity experiment was conducted to analyse and assess the capability of Scirpus mucronatus (L.) in tolerating and removing petrol in contaminated soil. This research was conducted for 72 days by using 5, 10 and 30 g/kg petrol as soil contaminants. Results showed that the system planted with S. mucronatus (L.) had high potential to treat the 10 g/kg petrol-contaminated soil and had an average Total Petroleum Hydrocarbon (TPH) removal of 82.1%. At 5 and 30 g/kg petrol, the planted system removed 74.9% and 75.8% TPH, respectively. The petrol (10 g/kg) affected the plant growth positively, which was indicated by the increase in dry and wet weights throughout the research period. The removal of the TPH in the system was performed because of the interaction of plants and rhizobacteria. SEM showed that a high concentration of petrol (30 g/kg) affected the plant tissue negatively, as indicated by the altered structures of the root and stem cells. EDX results also confirmed that petrol was absorbed by the plant, as shown by the increased carbon content in the plant's root and stem after the treatment.

Duckweeds: their utilization, metabolites and cultivation

Duckweeds are floating plants of the family Lemnaceae, comprising 5 genera and 36 species. They typically live in ponds or lakes and are found worldwide, except the polar regions. There are two duckweed subfamilies-namely Lemnoidea and Wolffioideae, with 15 and 21 species, respectively. Additionally, they have characteristic reproduction methods. Several metabolites have also been reported in various duckweeds. Duckweeds have a wide range of adaptive capabilities and are particularly suitable for experiments requiring high productivity because of their speedy growth and reproduction rates. Duckweeds have been studied for their use as food/feed resources and pharmaceuticals, as well as for phytoremediation and industrial applications. Because there are numerous duckweed species, culture conditions should be optimized for industrial applications. Here, we review and summarize studies on duckweed species and their utilization, metabolites, and cultivation methods to support the extended application of duckweeds in future.

Decolorization and phytotoxicity reduction of reactive blue 40 dye in real textile wastewater by active consortium: Anaerobic/aerobic algal-bacterial-probiotic bioreactor

The textile dyeing and printing industries has led to extensive environmental pollution and severely threatens ecosystems. The best microbial species for such application was selected among the isolated bacterial populations by conducting CI Reactive Blue 40 (CI RB 40) batch degradation studies with the bacterial-algal-probiotic strains. In this study, three suitable species (Pseudomonas putida, Chlorella and Lactobacillus plantarum) were applied to degrade and detoxify CI RB 40, a reactive diazo dye in Real Textile Wastewater, used in textile dyeing industry worldwide. Process parameters were optimized using Response Surface Methodology and under the optimum conditions (e.g., inoculum size of 10%), temperature of 35 °C, 150 ppm, and time of 6 days). The maximum COD and color removal efficiencies, when tested with 1000 ppm of dye using batch reactors were found to be 89% and 99%, respectively. Our results showed also that bacteria had a high decolorization capacity. The regression analysis revealed a good match of the experimental data to the second-order polynomial with a high coefficient of determination (R²). UV-Visible and FTIR spectroscopy analysis confirmed the biodegradation of CI RB 40. Finally, toxicity of CIRB 40 before and after biodegradation was studied and the detoxification of CIRB 40 dye solution after biodegradation process was confirmed.

Dual function of Lemna minor and Azolla pinnata as phytoremediator for Palm Oil Mill Effluent and as feedstock

In this study, two native duckweeds (Lemna minor and Azolla pinnata) were cultivated in Palm Oil Mill Effluent (POME) to extract nutrients from the effluent. Five grams of A. pinnata and 2 g of L. minor were transferred to 2 L POME (Initial concentrations: 198 mg/L COD, 4.3 mg/L nitrates, pH 9.53, 4 mg/L phosphate, 2.98 mg/L ammonia) with four different dilutions (2.5%, 5%, 10%, 15%) under greenhouse conditions. Samples of POME were taken every two days up to 10 days. Growth parameter, phosphate, ammonia, nitrates, pH, and COD were monitored within 10 days to select the most suitable growth medium for both plants. Results showed that 2.5% POME dilution had positive effect on L. minor growth and A. pinnata (wet weight increased by 8.7 g and 9.8 g, respectively), with all plants able to survive until the final day of exposure. The highest removal of ammonia was accomplished in 5% POME dilution by A. pinnata (98%) and L. minor (95.5%). The maximum phosphate removal was obtained in 10% POME dilution with 93.3% removal by A. pinnata and 86.7% by L. minor. Significant COD removal in 15% POME was obtained by L. minor (78%) and A. pinnata (66%). Both plants responded positively to the phytoremediation process, especially for A. pinnata which showed significant decreases in all parameters. The nutrient extraction by both plants from POME showed a positive effect on growth parameter, which has further promising potential to be used as animal feedstock.

Exposure of Lemna minor L. to gentian violet or Congo red is associated with changes in the biosynthesis pathway of biogenic amines

In the literature, there is a lack of data on the effect of gentian violet (GV) and congo red (CR) dyes on the biosynthesis pathway of biogenic amines (BAs) in Lemna minor L. (common duckweed). This plant species is an important link in the food chain. Both dyes inhibited growth, biomass yield and the biosynthesis of chlorophyll a in common duckweed. The predicted toxic units demonstrated that GV had a more toxic effect on the growth rate and biomass yield of common duckweed than CR. Decarboxylase activity in the biosynthesis of BAs in common duckweed is also a useful indicator for evaluating the toxicity of both dyes. Gentian violet also exerted more phytotoxic effects on the analyzed biochemical features of common duckweed because it changed the putrescine (Put) biosynthesis pathway, increased tyramine content 1.6 fold, inhibited the activity of S-adenosylmethionine decarboxylase by 40% and the activity of ornithine decarboxylase (ODC) by 80%. Tyrosine decarboxylase (TDC) was most active in plants exposed to the highest concentration of GV. Similarly to control plants, in common duckweed exposed to CR, Put was synthesized from ornithine; however, spermidine content was 86% higher, Put content was 51% lower, and ODC activity was 86% lower.

Bioaugmentation of Vibrio alginolyticus in phytoremediation of aluminium-contaminated soil using Scirpus grossus and Thypa angustifolia

This research analyses the performance of bacteria-assisted phytoremediation of aluminium (Al)-contaminated soil using native Indonesian plants namely, Scirpus grossus and Thypa angustifolia. A range finding test (RFT) was carried out for 14 days to obtain the tolerable Al concentration for both plants. A total of 2% and 5% (v/v) of Vibrio alginolyticus were bioaugmented during the 28-day phytoremediation test to enhance the overall Al removal. Result of the RFT showed that both plants can tolerate up to 500 mg/kg Al concentration. The addition of V. alginolyticus to the reactors resulted in a significant increment of Al removal from the contaminated soil (p < 0.05). Such addition of V. alginolyticus increased the Al removal by up to 14.0% compared with that without-bacteria addition. The highest Al removal was obtained for S. grossus with 5% V. alginolyticus with an efficiency of 35.1% from 500 mg/kg initial concertation. T. angustifolia with 500 mg/kg initial concentration showed the highest removal of 26.2% by the addition of 5% V. alginolyticus. The increase of Al removal by the bioaugmentation of V. alginolyticus was due to the interaction in the plant's rhizosphere. Exudates of both plants provided a good environment for bacteria to live in the root area. Meanwhile, the bacteria increased the bioavailability of Al to be further extracted by plants. Certain mechanisms, such as rhizostabilisation, phytostimulation and phytoextraction, were considered to be the main processes that occurred during the treatment. S. grossus and T. angustifolia displayed promising ability to act as Al hyperaccumulators with bioaccumulation factor values up to 5.308 and 3.068, respectively. Development of the design of the ex-situ soil phytoremediation reactors is suggested as a future research direction because it can significantly enhance the current obtained finding.