Controlled release of antibiotic amoxicillin drug using carboxymethyl cellulose-cl-poly(lactic acid-co-itaconic acid) hydrogel

Regulation of Hepatocellular Cholesterol Metabolism By Lactobacillus Paracasei BY2 and Its Embedding Delivery

In this study, five strains of lactic acid bacteria (LAB) with excellent cholesterol-lowering ability were screened from fermented foods. The gastrointestinal stress resistance, intestinal adhesion, and bacteriostasis abilities were evaluated to obtain the best LAB. And then, high-cholesterol HepG2 cell model was further prepared to explore the cholesterol-lowering mechanism of the LAB. Finally, pH-sensitive hydrogel prepared by Millettia speciosa Champ. carboxymethyl cellulose and Millettia speciosa Champ. cellulose was first applied to the microencapsulation of LAB. As a result, Lactobacillus paracasei BY2 (LP-BY2) exhibited higher cholesterol-lowering activity, intestinal adhesion, and bacteriostasis abilities compared with other LAB. Furthermore, it was found that LP-BY2 could reduce the cholesterol level by regulating the expression of key genes that involved in cholesterol synthesis (HMGCR and SREBP-2), uptake (LDLR), and outflow (LXR-α, ABCA1, ABCG5, ABCG8, and CYP7A1) in liver. At the same time, microencapsulation significantly enhanced the survival rate and cholesterol-lowering ability of LP-BY2 after gastrointestinal digestion. This study will provide an available reference for the application of Lactobacillus in prevention and treatment of hypercholesterolemia.

Chitosan coated graphene oxide incorporated sodium alginate hydrogel beads for the controlled release of amoxicillin

Biopolymers are crucial in pharmaceuticals, particularly for controlled drug release. In this study, we loaded the broad-spectrum antibacterial drug amoxicillin into sodium alginate, a well-known biopolymer. Graphene oxide was incorporated into the composite, and the hydrogel beads were coated with chitosan for its mucoadhesive properties. Various composites were formulated by adjusting the weight percentage of graphene oxide (GO). The fabricated beads demonstrated controlled and sustained drug release, with 98 % of the loaded drug molecules released over 24 h at gastric pH. The antibacterial test using the disc diffusion technique confirmed the drug release, exhibiting greater effectiveness against the gram-positive bacterium S. aureus than the gram-negative bacterium E. coli. The drug release data were optimized using zero order, first order, Higuchi, and Korsmeyer-Peppas models. The experimental data were best fit to the Korsmeyer-Peppas model with a relatively higher correlation coefficient value. Biocompatibility was evaluated through a cell viability test using mouse fibroblast cell lines (L929). The MTT viability assay confirmed high levels of cytocompatibility, even at higher concentrations (100 μg/mL), with 98.15 % viable cells. These results highlight the potential of the fabricated beads as an effective amoxicillin drug delivery system with biomedical applications.

Synthesis and characterization of pH-responsive conducting polymer/Na-alginate/gelatin based composite hydrogels for sustained release of amoxicillin drug

Composite hydrogels of Na-Alginate (Na-ALG) and Gelatin (GEL) with conducting polymers (CPs) were synthesised using poly(o-phenylenediamine) (POPD), polyaniline (PANI), poly(1-naphthylamine (PNA) and poly(vinylenedine fluoride) (PVDF). The synthesised hydrogels were characterized using FTIR, scanning electron microscopy (SEM) rheology, swelling ability and in-vitro drug release characteristics. The purpose of this investigation was to determine whether these hydrogels could be used to deliver antibiotics for extended drug release. The composite hydrogels were loaded with antibiotic drug: amoxicillin in three different concentrations and the release was studied at intestinal fluid (pH 7.4) and gastric fluid (pH 1.2). Release kinetics was found to show best fit in zero order models at both pH values and showed prolonged release characteristics. The POPD-Na-ALG/GEL showed highest release at intestinal pH of 7.4, while PVDF-Na-ALG/GEL showed highest release at gastric pH at 1.2.

Hydrogels for Oral Tissue Engineering: Challenges and Opportunities

Oral health is crucial to daily life, yet many people worldwide suffer from oral diseases. With the development of oral tissue engineering, there is a growing demand for dental biomaterials. Addressing oral diseases often requires a two-fold approach: fighting bacterial infections and promoting tissue growth. Hydrogels are promising tissue engineering biomaterials that show great potential for oral tissue regeneration and drug delivery. In this review, we present a classification of hydrogels commonly used in dental research, including natural and synthetic hydrogels. Furthermore, recent applications of these hydrogels in endodontic restorations, periodontal tissues, mandibular and oral soft tissue restorations, and related clinical studies are also discussed, including various antimicrobial and tissue growth promotion strategies used in the dental applications of hydrogels. While hydrogels have been increasingly studied in oral tissue engineering, there are still some challenges that need to be addressed for satisfactory clinical outcomes. This paper summarizes the current issues in the abovementioned application areas and discusses possible future developments.

Temperature-responsive hydrogel prepared from carboxymethyl cellulose-stabilized N-vinylcaprolactam with potential for fertilizer delivery

The growth of plants is highly dependent on sufficient water and suitable fertilizer nutrients, but the soil often loses moisture and the fertilizers are low efficiency. To address this issue, the temperature-responsive hydrogels were developed using the N-vinylcaprolactam (NVCL) dispersed in water through the emulsification of carboxymethyl cellulose (CMC) and acrylamide (AM), and urea was loaded into the hydrogel as a fertilizer. The amount of CMC and monomer have an effect on the structure, mechanical properties, swelling ability, and temperature sensitivity of the hydrogel. Therefore, the maximum swelling ratio of the hydrogel can reach 2056 % with the increasing hydrophilic groups, and the hydrogel exhibits a deswelling behavior as the temperature rises to higher than LCST due to the temperature responsiveness. Moreover, the fertilizer can rapidly release when the temperature is higher than LSCT, and exhibits similar release behavior in water and soil. Thus, the temperature-responsive hydrogel shows a great potential application for the controlled release of water and fertilizer in agriculture and forestry.

Recent advances and perspectives on production of value-added organic acids through metabolic engineering

Organic acids are important consumable materials with a wide range of applications in the food, biopolymer and chemical industries. The global consumer organic acids market is estimated to increase to $36.86 billion by 2026. Conventionally, organic acids are produced from the chemical catalysis process with petrochemicals as raw materials, which posts severe environmental concerns and conflicts with our sustainable development goals. Most of the commonly used organic acids can be produced from various organisms. As a state-of-the-art technology, large-scale fermentative production of important organic acids with genetically-modified microbes has become an alternative to the chemical route to meet the market demand. Despite the fact that bio-based organic acid production from renewable cheap feedstock provides a viable solution, low productivity has impeded their industrial-scale application. With our deeper understanding of strain genetics, physiology and the availability of strain engineering tools, new technologies including synthetic biology, various metabolic engineering strategies, omics-based system biology tools, and high throughput screening methods are gradually established to bridge our knowledge gap. And they were further applied to modify the cellular reaction networks of potential microbial hosts and improve the strain performance, which facilitated the commercialization of consumable organic acids. Here we present the recent advances of metabolic engineering strategies to improve the production of important organic acids including fumaric acid, citric acid, itaconic acid, adipic acid, muconic acid, and we also discuss the current challenges and future perspectives on how we can develop a cost-efficient, green and sustainable process to produce these important chemicals from low-cost feedstocks.

Environmentally friendly hydrogel: A review of classification, preparation and application in agriculture

Superabsorbent hydrogel (SH) is three-dimensional (3D) cross-linked hydrophilic polymer that can absorb and retain large quantities of water or other aqueous solutions. SH is made of water-affinity monomers and is widely used in biomedicine, wastewater treatment, hygiene and slow-release fertilizers (SRFs). This article focused on the preparation methods of SH, superabsorbent hydrogel composite and the application of SH in agriculture. By selecting various synthetic technologies and cross-linking agents, a series of chemical cross-linking or physical networks can be designed and tailored to meet specific applications. In view of the excellent characteristics of water absorption, biodegradability, water retention and slow-release capacity, SH occupies a dominant position in the SRFs market. In this work, the agricultural application of SH in double coated SRFs and nutrients carriers is also discussed. Some mechanisms related to the nutrient release were analyzed by mathematical models. In addition, some agronomic benefits of using superabsorbent hydrogels in improving water absorption, water holding capacity and increasing crop yields were also discussed. Although SH has certain shortcomings, from the perspective of long-term development, it will further show great potential in sustainable agriculture.

Design and Engineering of Natural Cellulose Fiber-Based Biomaterials with Eucalyptus Essential Oil Retention to Replace Non-Biodegradable Delivery Systems

This work aims at the design and engineering of sustainable biomaterials based on natural fibers to replace non-renewable fiber sources in the development of non-woven delivery systems. Cellulose fibers were used as the main support to produce multi-structured materials with the incorporation of microfibrillated cellulose (MFC) as an additive. A 3D carboxymethylcellulose matrix retaining a natural bioactive product, eucalyptus essential oil, (CMC/EO), with controlled release functionalities, was also applied to these materials using bulk and spray coating methodologies. Additionally, using a 3D modeling and simulation strategy, different interest scenarios were predicted to design new formulations with improved functional properties. Overall, the results showed that MFC provided up to 5% improved strength (+48%) at the expense of reduced softness (−10%) and absorbency (−13%) and presented a good potential to be used as an additive to maximize natural eucalyptus fibers content in formulations. The addition of CMC/EO into formulations’ bulk revealed better strength properties (21–28%), while its surface coating improved absorption (23–25%). This indicated that both application methods can be used in structures proposed for different sustainable applications or a more localized therapy, respectively. This optimization methodology consists of a competitive benefit to produce high-quality functionalized biomaterials for added-value applications.

Efficacy of Ambroxol Hydrochloride Combined with Amoxicillin Potassium Clavulanate Combination on Children with Bronchopneumonia and Its Impact on the Level of Inflammatory Factors

Objective. The goal of the present study was to examine the effect of ambroxol hydrochloride combined with amoxicillin potassium clavulanate combination on children with bronchopneumonia and its influence on the level of inflammatory factors. Methods. From January 2018 to June 2019, 100 children with bronchopneumonia admitted to the Pediatric Department of Nanjing Pukou District Hospital of Traditional Chinese Medicine were enrolled as the study subjects. The children were assigned either to an observation group or a control group in a ratio of 1:1 using the random alphabet method. The observation group was treated with ambroxol hydrochloride plus amoxicillin potassium clavulanate combination, and the control group was treated with amoxicillin potassium clavulanate combination. The therapeutic efficiency and serum white blood cells (WBC), C-reactive protein (CRP), interleukin-6 (IL-6), and tumor necrosis factor-a (TNF-α) were compared between the two groups. Results. Regarding the effective rate of treatment, the observation group (94%) was observed to be notably higher as compared to the control group (84%). The levels of WBC, CRP, IL-6, and TNF-α were reported to be significantly lower in the two groups after treatment. The WBC, CRP, IL-6, and TNF-α after treatment in the observation group were lower than those in the control group. The time for clinical symptoms to disappear of fever, cough, asthma, and pulmonary rales was all shorter in the observation group. Conclusion. The findings of the present study demonstrate that ambroxol hydrochloride combined with amoxicillin potassium clavulanate combination might be a reliable approach for the treatment of bronchopneumonia in children. It can synergistically relieve inflammation with high safety profiles.

Arabinoxylan-Carboxymethylcellulose Composite Films for Antibiotic Delivery to Infected Wounds

Modern dressings should provide for local delivery of antibiotics and protect the wound from bacterial infection, dehydration and environmental factors to achieve optimal healing. The local delivery of antibiotics can reduce adverse effects and resistance challenges. In this study, we fabricated film dressings composed of arabinoxylan (AX) from Plantago ovata seed husks and carboxymethylcellulose (CMC) by a solvent cast method for the delivery of the antibiotic amikacin (AMK). To determine the suitability of the prepared AX-CMC composite films as wound dressings and drug delivery materials, their physical, chemical, mechanical, morphological, thermal, pharmaceutical, antimicrobial, cytocompatible, and drug delivery properties were investigated. The results demonstrated that the dressings were suitable for delivering the drug at the wound site in a sustained manner and keeping the environment moist for rapid healing. The AMK-loaded AX-CMC films exhibited controlled release of AMK, excellent antibacterial activity, and cytocompatibility. Thus, the AX-CMC composite films appear to be promising bioactive dressing materials for the prevention of wound infections.

Recent Advances in Biotechnological Itaconic Acid Production, and Application for a Sustainable Approach

Intense research has been conducted to produce environmentally friendly biopolymers obtained from renewable feedstock to substitute fossil-based materials. This is an essential aspect for implementing the circular bioeconomy strategy, expressly declared by the European Commission in 2018 in terms of "repair, reuse, and recycling". Competent carbon-neutral alternatives are renewable biomass waste for chemical element production, with proficient recyclability properties. Itaconic acid (IA) is a valuable platform chemical integrated into the first 12 building block compounds the achievement of which is feasible from renewable biomass or bio-wastes (agricultural, food by-products, or municipal organic waste) in conformity with the US Department of Energy. IA is primarily obtained through fermentation with Aspergillus terreus, but nowadays several microorganisms are genetically engineered to produce this organic acid in high quantities and on different substrates. Given its trifunctional structure, IA allows the synthesis of various novel biopolymers, such as drug carriers, intelligent food packaging, antimicrobial biopolymers, hydrogels in water treatment and analysis, and superabsorbent polymers binding agents. In addition, IA shows antimicrobial, anti-inflammatory, and antitumor activity. Moreover, this biopolymer retains qualities like environmental effectiveness, biocompatibility, and sustainability. This manuscript aims to address the production of IA from renewable sources to create a sustainable circular economy in the future. Moreover, being an essential monomer in polymer synthesis it possesses a continuous provocation in the biopolymer chemistry domain and technologies, as defined in the present review.

Optimization, in vitro release and toxicity evaluation of novel pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum semi-interpenetrating networks

BACKGROUND

In recent era, pH sensitive polymeric carriers that combines the materials engineering and medicine is gaining researcher's attention as they maximizes drug concentration at site of absorption and reduces side effects for e.g. orally administered cetirizine HCl (CTZ HCl) upsets the stomach and furthermore shows high intestinal absorption. Thus, development of pH sensitive hydrogels with sufficient mechanical strength will be good candidate to address this issue.

METHODS

Here, we developed pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum (IA-g-poly(AM)/sterculia gum) semi-interpenetrating network (semi-IPN) by free radical polymerization technique for intestinal delivery of CTZ HCL.

RESULTS

Optimized formulation (I5) with 6% w/w IA showed negligible swelling at pH 1.2, and maximum swelling at pH 7.4. Solid state characterization of optimized formulation showed successful development of semi-IPN structure and incorporation of drug without any noticeable drug-carrier interaction. In vitro release study showed biphasic pH dependent release of CTZ HCl, where initial burst release was observed at acidic pH followed by sustained release at basic pH. Acute oral toxicity and histopathological studies confirmed the non-toxic nature of IA-g-poly(AM)/sterculia gum.

CONCLUSION

Conclusively, developed biocompatible semi-IPN hydrogels with sufficient pH sensitivity and mechanical strength could serve as a potential carrier for intestinal delivery of CTZ HCL to maximize its absorption and reduce side effects.

Natural bio-based monomers for biomedical applications: a review

In recent years, synthetic and semi-synthetic polymer materials have been widely used in various applications. Especially concerning biomedical applications, their biocompatibility, biodegradability, and non-toxicity have increased the interest of researchers to discover and develop new products for the well-being of humanity. Among the synthetic and semi-synthetic materials, the use of natural bio-based monomeric materials presents a possible novel avenue for the development of new biocompatible, biodegradable, and non-toxic products. The purpose of this article is to review the information on the role of natural bio-based monomers in biomedical applications. Increased eco-friendliness, biocompatibility, biodegradability, non-toxicity, and intrinsic biological activity are some of the attributes which make itaconic, succinic, citric, hyaluronic, and glutamic acids suitable potential materials for biomedical applications. Herein, we summarize the most recent advances in the field over the past ten years and specifically highlight new and interesting discoveries in biomedical applications. Natural origin acid-based bio-monomers for biomedical applications.

Cellulose-Based Hydrogels as Sustained Drug-Delivery Systems

Hydrogels, three-dimensional (3D) polymer networks, present unique properties, like biocompatibility, biodegradability, tunable mechanical properties, sensitivity to various stimuli, the capacity to encapsulate different therapeutic agents, and the ability of controlled release of the drugs. All these characteristics make hydrogels important candidates for diverse biomedical applications, one of them being drug delivery. The recent achievements of hydrogels as safe transport systems, with desired therapeutic effects and with minimum side effects, brought outstanding improvements in this area. Moreover, results from the utilization of hydrogels as target therapy strategies obtained in clinical trials are very encouraging for future applications. In this regard, the review summarizes the general concepts related to the types of hydrogel delivery systems, their properties, the main release mechanisms, and the administration pathways at different levels (oral, dermal, ocular, nasal, gastrointestinal tract, vaginal, and cancer therapy). After a general presentation, the review is focused on recent advances in the design, preparation and applications of innovative cellulose-based hydrogels in controlled drug delivery.

Soy Protein-Based Hydrogel under Microwave-Induced Grafting of Acrylic Acid and 4-(4-Hydroxyphenyl)butanoic Acid: A Potential Vehicle for Controlled Drug Delivery in Oral Cavity Bacterial Infections

The objective of this work was to evaluate grafted soy protein isolate (SPI) for pharmaceutical applications. The present work reports the microwave-assisted preparation of soy protein isolate\grafted[acrylic acid-co-4-(4-hydroxyphenyl)butanoic acid] [SPI-g-(AA-co-HPBA)] hydrogel via graft copolymerization using N,N-methylene-bis-acrylamide and potassium persulphate as the cross-linker and initiator, respectively. The chemical and physical properties of the synthesized polymeric hydrogels were analyzed by Fourier transform infrared spectroscopy, liquid chromatography-mass spectrometry (LCMS), nuclear magnetic resonance 1H-NMR, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The SEM, TEM, and XRD analyses have confirmed the formation of hydrogel SPI-g-(AA-co-HPBA) with the network structure having a layered and crystalline surface. The SPI-g-(AA-co-HPBA) hydrogel was investigated for the sustained and controlled drug delivery system for the release of model drug ciprofloxacin at basic pH for its utilization against bacterial infection in oral cavity. The drug release profile for SPI-g-(AA-co-HPBA) hydrogels was studied using LCMS at the ppb level at pH = 7.4. The synthesized hydrogel was found to be noncytotoxic, polycrystalline in nature with a network structure having good porosity, increased thermal stability, and pH-responsive behavior. The hydrogel has potential to be used as the vehicle for controlled drug delivery in oral cavity bacterial infections.

Microwave-Assisted Rapid Synthesis of Reduced Graphene Oxide-Based Gum Tragacanth Hydrogel Nanocomposite for Heavy Metal Ions Adsorption

Reduced graphene oxide (RGO) was synthesized in this research via Tour's method for the use of filler in the hydrogel matrix. The copolymerization of N,N-dimethylacrylamide (DMA) onto the gum tragacanth (GT) was carried out to develop gum tragacanth-cl-N,N-dimethylacrylamide (GT-cl-poly(DMA)) hydrogel using N,N'-methylenebisacrylamide (NMBA) and potassium persulfate (KPS) as cross-linker and initiator correspondingly. The various GT-cl-poly(DMA) hydrogel synthesis parameters were optimized to achieve maximum swelling of GT-cl-poly(DMA) hydrogel. The optimized GT-cl-poly(DMA) hydrogel was then filled with RGO to form reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide (GT-cl-poly(DMA)/RGO) hydrogel composite. The synthesized samples were used for competent adsorption of Hg²⁺ and Cr⁶⁺ ions. Fourier transform infrared, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy were used to characterize the gum tragacanth-cl-N,N-dimethylacrylamide hydrogel and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide hydrogel composite. The experiments of adsorption-desorption cycles for Hg²⁺ and Cr⁶⁺ ions were carried out to perform the reusability of gum tragacanth-cl-N,N-dimethylacrylamide hydrogel and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide hydrogel composite. From these two samples, reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide exhibited high adsorption ability. The Hg²⁺ and Cr⁶⁺ ions adsorption by gum tragacanth-cl-N,N-dimethylacrylamide and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide were best suited for pseudo-second-order kinetics and Langmuir isotherm. The reported maximum Hg²⁺ and Cr⁶⁺ ions adsorption capacities were 666.6 mg g^-1 and 473.9 mg g^-1 respectively.

Preparation of crystalline nanocellulose/hydroxypropyl β cyclodextrin/carboxymethyl cellulose polyelectrolyte complexes and their controlled release of neohesperidin-copper (II) in vitro

A natural hydrogel film was prepared using carboxymethyl cellulose (CMC), cellulose nanocrystals (CNC), and hydroxypropyl β cyclodextrin (HP-β-CD) as reactants and citric acid as the cross-linking agent and used for the controlled release of neohesperidin-copper(II)(NH-Cu (II)). The hydrogel film was characterized by ATR-FTIR, XRD, TGA and DSC. The film showed controlled swelling behavior; the release behavior of NH-Cu(II) from the hydrogel film was also investigated in different solutions including distilled water, various salt solutions including 0.9% NaCl, and solutions having different pH values. Thiazolyl blue tetrazolium bromide assay and relative growth rates were adopted to evaluate the biocompatibility and cytotoxicity of the prepared hydrogel films. The results indicated that the expansion kinetics followed Fickian diffusion and Schott's second-order kinetics model. The hydrogel film exhibited enhanced mechanical properties and improved thermal stability at high temperatures due to the addition of CNC, with the amount of added CNC affecting the swelling ratio, salt sensitivity, and pH sensitivity of the hydrogel film in different solutions. Additionally, the CNC largely improved the loading and encapsulation efficiency of the hydrogel films, with the optimal CNC addition amount being 4% which yielded a loading amount of 753.75 mg/g and an accumulated release rate of 85.08%. The hydrogel film with proven cell compatibility and non-cytotoxicity can potentially be used as a drug delivery and controlled release material.

Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability

Environmental impacts and consumer concerns have necessitated the study of bio-based materials as alternatives to petrochemicals for packaging applications. The purpose of this review is to summarize synthetic and non-synthetic materials feasible for packaging and textile applications, routes of upscaling, (industrial) applications, evaluation of sustainability, and end-of-life options. The outlined bio-based materials include polylactic acid, polyethylene furanoate, polybutylene succinate, and non-synthetically produced polymers such as polyhydrodyalkanoate, cellulose, starch, proteins, lipids, and waxes. Further emphasis is placed on modification techniques (coating and surface modification), biocomposites, multilayers, and additives used to adjust properties especially for barriers to gas and moisture and to tune their biodegradability. Overall, this review provides a holistic view of bio-based packaging material including processing, and an evaluation of the sustainability of and options for recycling. Thus, this review contributes to increasing the knowledge of available sustainable bio-based packaging material and enhancing the transfer of scientific results into applications.

Recent advances in celluloses and their hybrids for stimuli-responsive drug delivery

The limitations of existing drug delivery systems (DDS) such as non-specific bio-distribution and poor selectivity have led to the exploration of a variety of carrier platforms to facilitate highly desirable and efficient drug delivery. Stimuli-responsive DDS are one of the most versatile and innovative approach to steer the compounds to the intended sites by exploiting their responsiveness to a range of various triggers. Preparation of stimuli-responsive DDS using celluloses and their derivatives offer a remarkable advantage over conventional polymer materials. In this review, we highlight on state-of-art progress in developing cellulose/cellulose hybrid stimuli-responsive DDS, which covers the preparation techniques, physicochemical properties, basic principles and, mechanisms of stimuli effect on drug release from various types of cellulose based carriers, through recent innovative investigations. Attention has been paid to endogenous stimuli (pH, temperature, redox gradient and ionic-strength) responsive DDS and exogenous stimuli (light, magnetic field and electric field) responsive DDS, where the cellulose-based materials have been extensively employed. Furthermore, the current challenges and future prospects of these DDS are also discussed at the end.

Development of microcrystalline cellulose based hydrogels for the in vitro delivery of Cephalexin

Three hydrogels namely, microcrystalline cellulose (MCC), microcrystalline cellulose-carboxymethyl cellulose (MCC-CMC) and microcrystalline cellulose-xylan (MCC-xylan) are synthesized using ethylene glycol diglycidyl ether as crosslinker. For the chemical characterization, FT-IR spectroscopy is adopted, whereas gel fraction and swelling ratio are used for the physical characterization of the hydrogels. Coarse morphology of hydrogels is further visualized by microscopic observation. The rheological characterization proves that MCC-CMC gel withstands higher strain to resist permanent deformation than the other two gels. The hydrogels are used for the loading and in vitro release of Cephalexin. The in vitro delivery is carried out in various simulated body fluids such as phosphate buffer saline (PBS), artificial intestinal fluid (AIF) and artificial gastric fluid (AGF). MCC-CMC is observed to deliver Cephalexin individually 15% in AGF, 86% in AIF, 98% in PBS and 98% in consecutive buffers (AGF followed by AIF and PBS).

Switchable Dual-Function and Bioresponsive Materials to Control Bacterial Infections

The colonization of undesired bacteria on the surface of devices used in biomedical and clinical applications has become a persistent problem. Different types of single-function (cell resistance or bactericidal) bioresponsive materials have been developed to cope with this problem. Even though these materials meet the basic requirements of many biomedical and clinical applications, dual-function (cell resistance and biocidal) bioresponsive materials with superior design and function could be better suited for these applications. The past few years have witnessed the emergence of a new class of dual-function materials that can reversibly switch between cell-resistance and biocidal functions in response to external stimuli. These materials are finding increased applications in biomedical devices, tissue engineering, and drug-delivery systems. This review highlights the recent advances in design, structure, and fabrication of dual-function bioresponsive materials and discusses translational challenges and future prospects for research involving these materials.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

PLGA-amoxicillin-loaded layer formed on anodized Ti alloy as a hybrid material for dental implant applications

In this paper, the preparation of a functional hybrid coating loaded with a drug (amoxicillin) on a promising titanium alloy - Ti-15Mo alloy is presented. The titanium alloy surface was anodized in solution with bioactive compounds to obtain a porous oxide layer favorable for MG-63 osteoblast-like cell adhesion. Then, a poly(lactide-co-glycolide) (PLGA) loaded with amoxicillin layer was formed using a dip-coating technique to cover the oxide layer, without filling in all of the pores. The morphology of the surface was evaluated using scanning electron microscopy supported by 3D Roughness Reconstruction software. The surface treatment of the Ti-15Mo alloy surface caused the surface roughness to increase up to 1.71 μm. The anodization process caused the Ti-15Mo alloy surface to become slightly more hydrophilic; however, the formation of the PLGA layer loaded with drug increased the contact angle to 96.5° ± 2.2°, respectively. After 4 weeks of polymer layer degradation, the registered signals on the ¹H NMR spectrum were identical to the signals registered for lactic acid (LAc), which confirms that the polymer layer was degraded within a short period of time. The concentration of drug released into the artificial saliva was investigated using high-performance liquid chromatography (HPLC) up to 12 h of coatings immersion. During the first hour of coating degradation in artificial saliva, and the concentration of the drug (13 μg/ml) was enough to inhibit bacterial growth of S. aureus and S. epidermidis. These results were confirmed by agar plate diffusion method and evaluation of the minimal inhibitory concentration (MIC). The cytocompatibility of the materials was determined using the osteoblast-like cells MG-63, and the viability and cell morphology (live/dead staining) were also evaluated. The results showed that amoxicillin influences the osteoblast-like MG-63 cells' behavior during cell culture, especially for the first few hours. The influence on the type of surface treatment on MG-63 cell behavior during 7 days of culture is discussed in this paper. To the best of our knowledge, this is the first time that a fast-degrading layer with amoxicillin has been deposited on previously anodized Ti surface. The formation of functional coating may find application as a cytocompatible coating to prevent bacterial adhesion on long-term implant surfaces.

AuNPs-PCL nanocomposite accelerated abdominal wound healing through photothermal effect and improving cell adhesion

Accelerating wound healing with modified biomaterial has been an attracting field in both material science and medicine. Enhanced cell adhesion could be acquired by improving surface hydrophilicity, which contributes to accelerating wound healing. Chemical reaction has been used for surface modification, but this study used a simple and nontoxic method to improve the hydrophilicity. Polycaprolactone (PCL) scaffold has been regarded as promising material for wound healing while its surface is hydrophobic. Our study demonstrated enhanced hydrophilicity of PCL with AuNPs coating. AuNPs has good biocompatibility and excellent photothermal effect. The coating of AuNPs not only improved the cell adhesion, but also gave PCL the ability to inhibit the growth of bacteria. Animal study showed that the nanocomposites decreased lymphocytes and neutrophils, increased neovascularization and accelerated the abdominal wound healing, which was attributed to improved hydrophilicity and the antibacterial ability. In conclusion, we demonstrated that the nanocomposite could be used as a potential scaffold for cell adhesion and wound healing, and the role of AuNPs was highlighted as a kind of outstanding supplement.