Cu(II)-carboxymethyl chitosan-silane schiff base complex grafted on nano silica: Structural evolution, antibacterial performance and dye degradation ability

Degradable mesoporous organosilicon nanoparticles coated with chitosan-Cu2+ complexes with dual stimulus-response for efficient prochloraz delivery

Accurate pesticide application enhances efficiency, reduces usage and minimizes environmental risks. This study employed amino-functionalized degradable mesoporous organosilicon nanoparticles (DMON-N) as a carrier, with chitosan (CS) acting as a capping agent. Chemical cross-linking of CS with Cu2+ through chelation promotes the formation of Cu2+-CS complexes. A pH/redox dual-responsive prochloraz (PRO) delivery system (Cu-CS@PRO-DMON, CCPD) was constructed and evaluated for its potential application in controlling rice sheath blight. The successful preparation of CCPD was confirmed through a series of physicochemical characterizations. The findings demonstrated that CCPD exhibited a high PRO loading capacity (29.09 %) and that PRO could be released from CCPD for an extended duration (up to 144 h) under the influence of acidity and glutathione promotion. Furthermore, CCPD demonstrated excellent wettability (measured contact angle: 63.52 ± 0.42°), adhesion (23.83 ± 2.59 mg/cm2) and resistance to rainfall washout on rice leaves. CCPD demonstrated superior antimicrobial efficacy to prochloraz technical (PRO TC) material and prochloraz emulsion in water (PRO EW). The biosafety assessment revealed that CCPD exhibited minimal acute toxicity to zebrafish, no discernible toxicological effects on human bronchial epithelial cells and no notable impact on rice.

Critical assessment of recent advancements in chitosan-functionalized iron and geopolymer-based adsorbents for the selective removal of arsenic from water

Inorganic arsenic (As), a known carcinogen and major contaminant in drinking water, affects over 140 million people globally, with levels exceeding the World Health Organization's (WHO) guidelines of 10 μg L-1. Developing innovative technologies for effluent handling and decontaminating polluted water is critical. This paper summarizes the fundamental characteristics of chitosan-embedded composites for As adsorption from water. The primary challenge in selectively removing As ions is the presence of phosphate, which is chemically similar to As(V). This study evaluates and summarizes innovative As adsorbents based on chitosan and its composite modifications, focusing on factors influencing their adsorption affinity. The kinetics, isotherms, column models, and thermodynamic aspects of the sorption processes were also explored. Finally, the adsorption process and implications of functionalized chitosan for wastewater treatment were analyzed. There have been minimal developments in water disinfection using metal-biopolymer composites for environmental purposes. This field of study offers numerous research opportunities to expand the use of biopolymer composites as detoxifying materials and to gain deeper insights into the foundations of biopolymer composite adsorbents, which merit further investigation to enhance adsorbent stability.

Chitosan-based Schiff bases: Promising materials for biomedical and industrial applications

There is plenty of scope for modifying chitosan, an only polycationic natural polysaccharide, owing to its reactive functional groups, namely hydroxyl and amino groups. Although innumerable numbers of chitosan derivatives have been synthesized by modifying these groups and reported elsewhere, in this review article, an attempt has been exclusively made to demonstrate the syntheses of various chitosan-based Schiff bases (CSBs) simply by allowing the reactions of reactive amino groups of chitosan with different aldehydes/ketones of interest. Due to their very peculiar and unique characteristics, such as biodegradability, biocompatibility, metal-binding capability, etc., they are found to be very useful for diversified applications. Thus, we have also attempted to showcase their very specific biomedical fields, including tissue engineering, drug delivery, and wound healing, to name a few. In addition, we have also discussed the utilization of CSBs for industrial applications such as wastewater treatment, catalysis, corrosion inhibition, sensors, etc.

Synthesis of chitosan succinate-g-amine functionalized mesoporous silica: Inorganic-organic nanohybrid for antibacterial assessment, antioxidant activity and pH-controlled drug delivery

An innovative and proficient inorganic-organic nanohybrid was synthesized by using amine modified MCM-41 as an inorganic precursor combined with organic moiety, a derivative of chitosan i.e. chitosan succinate through amide bond. These nanohybrids can be used in diverse applications due to potential combination of desired properties of inorganic and organic components. The nanohybrid was characterized by FTIR, TGA, small angle powder XRD, zeta potential, particle size distribution, BET, proton NMR and ¹³C NMR techniques to confirm its formation. The synthesized hybrid was loaded with curcumin drug to check its potential application for controlled drug release, showing 80 % drug release in acidic medium (i.e. pH -5.0), while physiological pH -7.4 shows only 25 % release. The encapsulation efficiency of nanohybrid is 87.24 %. The results of antibacterial performances are demonstrated in terms of ZOI (zone of inhibition) which depicts that hybrid material shows better ZOI in gram negative (E. coli) than for gram positive (B. subtilis) bacteria. Nanohybrid was also tested for the antioxidant activity by using two different methods (DPPH and ABTS) radical scavenging methods. The ability of nano-hybrid to scavenge DPPH radicals was found 65 %, and ability to scavenge ABTS radicals was 62.47 %.

A New Calcium(II)-Based Substitute for Enrofloxacin with Improved Medicinal Potential

Enrofloxacin (EFX) reacting with Ca(II) afforded a new complex, [Ca(EFX)₂(H₂O)₄] (EFX-Ca), which was structurally characterized both in solid and solution chemistry. E. coli and S. typhi were tested to be the most sensitive strains for EFX-Ca. The LD₅₀ value of EFX-Ca in mice was 7736 mg/kg, implying the coordination of EFX to Ca(II) effectively reduced its acute toxicity. EFX-Ca also decreased the plasma-binding rate and enhanced the drug distribution in rats along with longer elimination half-life. EFX-Ca also showed similar low in vivo acute toxicity and higher anti-inflammation induced by H₂O₂ or CuSO₄ in zebrafish, with reactive oxygen species (ROS)-related elimination. The therapeutic effects of EFX-Ca on two types (AA and 817) of E. coli-infected broilers were also better than those of EFX, with cure rates of 78% and 88%, respectively. EFX-Ca showed promise as a bio-safe metal-based veterinary drug with good efficacy and lower toxicity.

Synthesis, Biological and In Silico Studies of a Tripodal Schiff Base Derived from 2,4,6-Triamino-1,3,5-triazine and Its Trinuclear Dy(III), Er(III), and Gd(III) Salen Capped Complexes

A tripodal Schiff base ligand, 2,4,6-Tris(4-carboxybenzimino)-1,3,5-triazine (MT) and its trinuclear Dy(III), Er(III), and Gd(III) complexes were synthesized. These were characterized using UV-visible, IR, ¹H, and ¹³C NMR spectroscopies, elemental analysis, and molar conductivity measurements. The spectral studies indicate that the ligand is hexadentate and coordinates to the Ln(III) ions through the oxygen atoms of the carboxylic group. The trinuclear complexes were characterized as being bridged by carboxylate anions to the Dy(III), Er(III), and Gd(III) salen centers and displaying a coordination number of six. Biological studies revealed that MT is more active against the test micro-organisms relative to the trinuclear complexes. Acute toxicity studies revealed that MT is safe and has a wide range of effective doses (ED₅₀). In vivo antimalarial studies indicate that MT could serve as an effective antimalarial agent since it has parasitemia inhibition of 84.02% at 50 mg/kg and 65.81% at 25 mg/kg, close to the value (87.22%) of the standard drug—Artesunate. Molecular docking simulation studies on the compounds against SARS-CoV-2 (6Y84) and E. coli DNA gyrase (5MMN) revealed effective binding interactions through multiple bonding modes. The binding energy calculated for Er(III)MT-6Y84 and Er(III)MT-5MMN complexes showed active molecules with the ability to inhibit SARS-CoV-2 and E. coli DNA gyrase.

Novel Core-Sheath Cu/Cu2O-ZnO-Fe3O4 Nanocomposites with High-Efficiency Chlorine-Resistant Bacteria Sterilization and Trichloroacetic Acid Degradation Performance

In order to solve two issues of chlorine-resistant bacteria (CRB) and disinfection byproducts (DBPs) in tap water after the chlorine-containing treatment process, an innovative core-sheath nanostructured Cu/Cu₂O-ZnO-Fe₃O₄ was designed and synthesized. The fabrication mechanism of the materials was then systematically analyzed to determine the component and valence state. The properties of CRB inactivation together with trichloroacetic acid (TCAA) photodegradation by Cu/Cu₂O-ZnO-Fe₃O₄ were investigated in detail. It was found that Cu/Cu₂O-ZnO-Fe₃O₄ displayed excellent antibacterial activity with a relatively low cytotoxicity concentration due to its synergism of nanowire structure, ion release, and reactive oxygen species generation. Furthermore, the Cu/Cu₂O-ZnO-Fe₃O₄ nanocomposite also exhibited outstanding photocatalytic degradation activity on TCAA under simulated sunlight irradiation, which was verified to be dominated by the surface reaction through kinetic analysis. More interestingly, the cell growth rate of Cu/Cu₂O-ZnO-Fe₃O₄ was determined to be 50% and 10% higher than those of Cu/Cu₂O and Cu/Cu₂O-ZnO after 10 h incubation, respectively, manifesting a weaker cytotoxicity. Therefore, the designed Cu/Cu₂O-ZnO-Fe₃O₄ could be a promising agent for tap water treatment.

Preparation, and physicochemical and biological evaluation of chitosan-Arthrospira platensis polysaccharide active films for food packaging

Active films from chitosan incorporated with Arthrospira platensis polysaccharide (APP) of various ratios (0.0%, 0.5%, and 1.0%, w/v) were developed by solution casting. The effect of APP on the structural, physicochemical, mechanical, antimicrobial, and antioxidant properties of the chitosan-APP films (CA-film) was investigated. Fourier transform infrared spectra (FTIR) confirmed successful incorporation of chitosan and APP. The compact structure of the films was observed clearly in scanning electron microscopy (SEM) and atomic force microscopy (AFM) images. X-ray diffraction (XRD) patterns suggest the semi-crystalline structure was increased upon addition of APP. The composite films showed an improved water resistance and vapor barrier properties, and reduced by at least 27.4% and 32.1% in swelling degree (S_d ) and water vapor permeability (WVP) compared with chitosan film (C-film), respectively. However, the transparency decreased slightly, which may be due to the shrinkage of the spacing of the polymer interchain. The composite films also displayed enhanced the mechanical properties. The antimicrobial activity of the CA-film showed an increase of at least of 0.41-fold in inhibition zone diameter for E. coli. At a concentration of 1.2 mg/mL, the antioxidant activity of CA-film was enhanced by more than threefold compared with C-film. Therefore, CA-films have good potential as sources of active packaging material for the food industry.

Biologically active Co (II), Cu (II), Zn (II) centered water soluble novel isoniazid grafted O-carboxymethyl chitosan Schiff base ligand metal complexes: Synthesis, spectral characterisation and DNA nuclease activity

In this study, the new N, N, O tridentate donor water soluble isoniazid based biopolymer Schiff base ligand and their Co (II), Cu (II), Zn (II) metal complexes were prepared. The compounds were designed for potential biological application such as antibacterial, antifungal, anti-inflammatory, total antioxidant, antidiabetic and DNA binding studies. The synthesized compounds were illuminated in different light sources of various spectra were used to explore the functional groups of Biopolymer derivatives. Thermal degradation, thermal stability and percentage of mass loss for the prepared compounds were investigated through thermo gravimetric and differential thermal (TGA-DTA) analyses. Crystalline structure of synthesized biopolymer derivatives were explored by X-ray diffraction (XRD) studies, the crystallinity of chitosan is gradually decreased after the Schiff base and complex formation. Surface morphology and structures of the prepared compounds were examined using SEM analysis. The magnetic moment and magnetism of the metal complexes were studied using Vibrating-sample magnetometer (VSM). Antidiabetic studies of Biopolymer Schiff base and metal complexes were carried out by α-amylose inhibitory method. DNA nuclease activities of synthesized metal complexes were investigated by Ultra-Violet (UV) and viscometry methods. The Cu (II) complexes showed better DNA binding results than Co (II) and Zn (II) complexes.

Polyvinylpyrrolidone-Aminopropyl-SBA-15 schiff Base hybrid for efficient removal of divalent heavy metal cations from wastewater

The mesoporous silica-polymer hybrid was prepared as an adsorbent for divalent heavy metals (Pb(II), Ni(II), and Cu (II)) from rice husk and polyvinylpyrrolidone (PVP) through three successive steps. The first is the preparation of the mesoporous silica (SBA-15), the second is grafting 3-aminopropyltrimethoxysilane on SBA-15, and the following step is the formation of Schiff base (PVP-SBA-15) between amine end-capped silica and PVP moieties. The materials were characterized by different techniques, including FTIR, low and wide-angle XRD, N₂-adsorption, and HR-TEM. The NH₂-SBA-15 displayed a moderate affinity toward heavy element ions under study. Grafting of PVP moieties introduces a high affinity toward heavy metal ions, and the adsorption is a well-fitted Langmuir adsorption model. A series of experiment adsorption equilibrium reported with SBA-15, NH₂-SBA-15, and PVP-SBA-15, which showed an adsorption capacity of 128 mg/g (Cu (II)), 175 mg/g (Pb (II)) and 72 mg/g for Ni(II). Kinetic studies have shown that the best way to describe the adsorption process of heavy metals is pseudo-first-order. The value of ΔG°, ΔH°, and ΔS° demonstrated that the adsorption of heavy metals on the PVP-SBA-15 was endothermic in nature and spontaneous. These results exhibited that PVP-SBA-15 material has considerable competence in eliminating heavy metals from wastewater.

Diverse Pathway to Obtain Antibacterial and Antifungal Agents Based on Silica Particles Functionalized by Amino and Phenyl Groups with Cu(II) Ion Complexes

Production of environmentally friendly multitasking materials is among the urgent challenges of chemistry and ecotechnology. The current research paper describes the synthesis of amino-/silica and amino-/phenyl-/silica particles using a one-pot sol-gel technique. CHNS analysis and titration demonstrated a high content of functional groups, while scanning electron microscopy revealed their spherical form and ∼200 nm in size. X-ray photoelectron spectroscopy data testified that hydrophobic groups reduced the number of water molecules and protonated amino groups on the surface, increasing the portion of free amino groups. The complexation with Cu(II) cations was used to analyze the sorption capacity and reactivity of the aminopropyl groups and to enhance the antimicrobial action of the samples. Antibacterial activities of suspensions of aminosilica particles and their derivative forms containing adsorbed copper(II) ions were assayed against Gram-positive (Staphylococcus aureus ATCC 25923) and Gram-negative bacteria (Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853). Meanwhile, antifungal activity was tested against fungi (Candida albicans UCM Y-690). According to zeta potential measurements, its value could be depended on the suspension concentration, and it was demonstrated that the positively charged suspension had higher antibacterial efficiency. SiO₂/-C₆H₅/-NH₂ + Cu(II) sample's water suspension (1%) showed complete growth inhibition of the bacterial culture on the solid medium. The antimicrobial activity could be due to occurrence of multiple and nonspecific interactions between the particle surfaces and the surface layers of bacteria or fungi.

Cu(II)-Hydrazide Coordination Compound Supported on Silica Gel as an Efficient and Recyclable Heterogeneous Catalyst for Green Click Synthesis of β-Hydroxy-1,2,3-triazoles in Water

A hydrazone ligand, (E)-6-(2-((2-hydroxynaphthalen-1-yl)methylene)hydrazinyl)nicotinohydrazide (H₂L), was synthesized and characterized by spectroscopic methods. The reaction of H₂L with CuCl₂·2H₂O in methanol gave Cu(II) coordination compound, [Cu(HL')(Cl)]·CH₃OH (1), which was characterized by elemental analysis and spectroscopic methods (Fourier transform infrared (FT-IR) and UV-vis). The structure of 1 was also determined by single-crystal X-ray analysis. Structural studies confirmed the formation of esteric group during the synthesis of 1. Compound 1 was immobilized on 3-aminopropyltriethoxysilane (APTS)-functionalized silica gel through the amidification reaction and the obtained heterogeneous coordination compound was utilized as a catalyst for the three-component azide-epoxide-alkyne cycloaddition reaction in water as a green solvent. The structural properties of the heterogeneous catalyst were characterized by a combination of FT-IR, UV-vis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS) analyses. The effect of the amount of catalyst and temperature on the cycloaddition reaction was studied, and the obtained 1,2,3-triazoles were characterized by spectroscopic studies and single-crystal X-ray analysis. The catalytic investigations revealed that this catalytic system has high activity in the synthesis of β-hydroxy-1,2,3-triazoles. It was also found that the aromatic and aliphatic substituents on the alkyne and epoxide together with the reaction temperature have considerable effects on the activity and regioselectivity of this catalytic system.

Synthesis and characterisation of novel Cu(ii)-anchored biopolymer complexes as reusable materials for the photocatalytic degradation of methylene blue

This study focused on the synthesis, photocatalytic degradation of organic dyes and biological activity of novel N, N, O-donor tridentate water soluble 4-hydroxy benzohydrazide-grafted biopolymer Schiff base Cu(ii) complexes. The eco-friendly catalysts were designed for potential application in the degradation of organic dyes. The photocatalytic degradation of methylene blue was investigated with various irradiation times (30, 60, 90 and 120 min), catalytic dosages (5, 10, 15 and 20 mg) and pH (3, 7 and 12). The as-prepared compounds were characterised via various techniques including FT-IR and FT-NMR spectroscopy; TGA-DTA, XRD, SEM-EDAX; ESR and UV-vis spectroscopy; photoluminescence, magnetic moment, and conductivity measurements; and elemental and thermal analysis. The crystallinity of the Schiff base ligands, chitosan, and their Cu(ii) complexes was analysed via X-ray diffraction (XRD) studies. The XRD patterns revealed that the polymer chitosan was more crystalline than the Schiff base ligands and their complexes. The surface morphological analysis by scanning electron microscopy (SEM) revealed that the Cu(ii) complexes were amorphous in nature compared to chitosan and the ligands. The anti-inflammatory and anti-diabetic studies of the biopolymer Cu(ii) complexes were performed using the albumin denaturation technique and McCue and Shetty method, respectively. The as-synthesized 4-hydroxy benzohydrazide-grafted O-carboxymethyl chitosan Schiff base ligands and their Cu(ii) complexes showed a good anti-inflammatory and antidiabetic effect. The photocatalytic activity proved that the aryl-substituted complex was more efficient than the aliphatic-substituted complex.

Porous chitosan by crosslinking with tricarboxylic acid and tuneable release

Chitosan hydrogels crosslinked with 1,3,5-benzene tricarboxylic acid (BTC) are readily prepared at room temperature by adding aqueous chitosan solution dropwise into BTC-ethanol solution. Highly interconnected porous chitosan materials are subsequently prepared by freeze-drying the chitosan hydrogels. These chitosan materials show porous structures with smaller pores than conventionally prepared chitosan hydrogels via crosslinking with NaOH, genipin or sodium triphosphate. This method of forming chitosan hydrogels with BTC provides the advantage of facile encapsulation of both hydrophobic and hydrophilic compounds, as demonstrated with the model dyes (Oil Red O and Rhodamine B). The release of the hydrophilic dye from the chitosan hydrogels is demonstrated and can be tuned by BTC/chitosan concentrations and the hydrogel drying methods. However, the release of encapsulated hydrophobic dye is negligible.

Organic Solvent-Free Olefins and Alcohols (ep)oxidation Using Recoverable Catalysts Based on [PM12O40]3- (M = Mo or W) Ionically Grafted on Amino Functionalized Silica Nanobeads

Catalyzed organic solvent-free (ep)oxidation were achieved using H3PM12O40 (M = Mo or W) complexes ionically grafted on APTES-functionalized nano-silica beads obtained from straightforward method (APTES = aminopropyltriethoxysilane). Those catalysts have been extensively analyzed through morphological studies (Dynamic Light Scattering (DLS), TEM) and several spectroscopic qualitative (IR, multinuclear solid-state NMR) and quantitative (1H and 31P solution NMR) methods. Interesting catalytic results were obtained for the epoxidation of cyclooctene, cyclohexene, limonene and oxidation of cyclohexanol with a lower [POM]/olefin ratio. The catalysts were found to be recyclable and reused during three runs with similar catalytic performances.

Rat sciatic nerve regeneration across a 10-mm defect bridged by a chitin/CM-chitosan artificial nerve graft

Chitosan as a natural bioactive biopolymer has been commonly employed in guidance conduit for repairing peripheral nerve injury, due to its excellent properties of low toxicity, antibacterial properties, high biocompatibility and biodegradability. In this study, chitin and CM-chitosan were prepared from pharmaceutical grade chitosan. Moreover, a novel composite chitosan-based nerve graft comprising microporous chitin-based conduit and internal CM-chitosan fiber was constructed and applied to bridge sciatic nerve across a 10-mm defect in SD rats. The chitin/CM-chitosan artificial nerve graft could promote the proliferation of rat Schwann cells (RSC96) with good cell biocompatibility. After implantation, the artificial nerve graft showed slow degradation. No apparent toxicity was observed, and tissue inflammation was very slight after implantation, indicating favorable bio-safety of the nerve graft. Furthermore, the chitin/CM-chitosan artificial nerve graft could effectively promote restoration of damaged neurons with similar effect compared to the autograft. In conclusion, the composite biodegradable chitin/CM-chitosan nerve grafts possessed favorable biocompatibility and good potential in repairing peripheral nervous injury.

Effects on the Mechanical Properties of Nacre-Like Bio-Hybrid Membranes with Inter-Penetrating Petal Structure Based on Magadiite

Rigid biological systems are increasingly becoming a source of inspiration for the fabrication of the advanced functional materials due to their diverse hierarchical structures and remarkable engineering properties. As a bionic biomaterial with a clear layered structure, excellent mechanical properties, and interesting rainbow colors, nacre has become one of the most attractive models for novel artificial materials design. In this research paper, the tough and strong nacre-like bio-hybrid membranes with an interpenetrating petals structure were fabricated from chitosan (CS) and magadiite (MAG) clay nanosheets through the gel-casting self-assembling method. The analyses from X-ray diffraction (XRD), scanning electron microscope (SEM), and observations of water droplets on membranes indicated that the nacre-like hybrid membranes had a layered compact structure. Fourier transforms infrared spectroscopy (FTIR) analyses suggested that the CS molecular chains formed chemical bonds and hydrogen bonds with MAG layers. The inter-penetrating petal layered structure had a good effect on the mechanical properties of a nacre-like bio-hybrid membranes and the tensile strength of the hybrid membranes could reach at 78.6 MPa. However, the transmission analyses of the results showed that the hybrid membranes still had a certain visible light transmittance. Finally, the hybrid membranes possessed an intriguing efficient fire-shielding property during exposure to the flame of alcohol burner. Consequently, the great biocompatibility and excellent mechanical properties of the bio-hybrid membranes with the special interpenetrating petals structure provides a great opportunity for these composites to be widely applied in biomaterial research.