The combined effects of extrusion and heat-moisture treatment on the physicochemical properties and digestibility of corn starch

Combination of extrusion and bamboo leaf flavonoids modulates in vitro maize starch digestion: Insight into the molecular mechanisms and multi-scale structure

This study investigates the combined effects of extrusion processing and bamboo leaf flavonoids (BLFs) on the digestive properties and multiscale structure of maize starch (MS). Extrusion increased the levels of rapidly digestible starch (RDS) and slowly digestible starch while the content of resistant starch (RS) decreased to 20.19 %. Notably, higher BLF concentrations reversed this trend, increasing RS content to 35.30 %. The four main BLF monomers inhibited α-amylase activity by forming hydrogen bonds and hydrophobic interactions with its active residues. Extrusion disrupted the layered structure of MS, reducing its compactness, while the addition of 2.5 % BLFs led to pore formation on starch surface. The relative crystallinity of the starch decreased by approximately 34.34 % after extrusion. The addition of BLFs increased the single helix structures and improved the relative crystallinity of the nanocrystals with orthorhombic crystal structure. These results provide critical insights into how extrusion combined with BLFs can regulate starch digestibility.

Winemaking by-products fortification of flour formulations based on corn and lentil

Formulations based on a mixture of corn: lentil flours (70:30) (93.75%), salt (1.25%), sugar (5%), 5 or 20% of Hylon® V, were fortified with 5 and 20% of fermented Cabernet Sauvignon grape skin or seed, and unfermented Chardonnay grape seed flours, and evaluated for their functional components. The incorporation of winemaking by-products increased the dietary fibre content. Soluble sugars and arabinoxylans content depended only on corn:lentil flours presence. The total starch content varied between 42 .55 g/100g to 58.41 g/100g and the highest concentrations of resistant starch were determined in formulations with 20% Hylon® V. Total phenols, total flavonoids, and anthocyanins, were higher in all formulations with 20% fermented Cabernet Sauvignon skin or unfermented Chardonnay seed flours, regardless the content of corn:lentil flours. Winemaking by-products represent potential functional and prebiotic novel ingredients for new functional food products.

Synergistic effect of ozone treatment with α-amylase on the modification of microstructure and paste properties of japonica rice starch

The objective was to evaluate the synergistic effect of ozonization and α-amylase on modifying the microstructure and paste properties of starch, using 0.00042 g of ozone/100 g of buffer for various durations. Enzymatic susceptibility was increased, achieving maximum values of 12.73 % with an 11.42 % increase in crystallinity and an average particle size of 10.12 μm for 90 min treated japonica rice starch (JR90). The granules exhibited a polyhedral shape and, with increased intensity of combined treatments, formed clusters and lost their original geometry. Apparent viscosity, rheological, and textural parameters were reduced due to the more efficient action of α-amylase on ozonized starch, as confirmed by the low gelatinization enthalpy value (7.61 J/g). Ozone proved effective in opening starch chains, partially gelatinizing granules, homogenizing the enzymatic medium, and increasing the hydrolysis rate of α-amylase in japonica rice starch.

Effect of Yam Flour Modified with Plasma-Activated Water Combined with Extrusion Treatment on the Quality of Chinese Noodles

Yam noodles were produced by replacing high-gluten wheat flour with yam flour modified with plasma-activated water and twin-screw extrusion (PAW-TSE). The effects of varying amounts of modified yam flour on the color, cooking characteristics, texture, and in vitro digestibility of the noodles were investigated. As the amount of modified yam flour increased, the noodles became darker in color, while the bound water content increased, and the free water content decreased. The modified yam flour also affected the cooking properties, reducing the optimal cooking time, decreasing the water absorption, and increasing the cooking loss. Textural analysis revealed that the addition of modified yam flour improved the texture of raw noodles, enhancing their elasticity and chewiness after cooking, thus providing a better eating experience. Furthermore, the modified yam flour increased the resistant starch content, thereby enhancing the nutritional value of the noodles. These findings provide valuable insights for food manufacturers seeking to develop healthier and more appealing noodle products, potentially leading to greater consumer acceptance and market success.

Insight into the relationship between the starch crystalline structure and textural quality and physicochemical properties of reconstituted rice: Influence of feed moisture content

Reconstituted rice was prepared by extrusion with different feed moistures (30 %, 33 %, 36 %, 39 % and 42 %), and the relationship between the crystalline structure, physicochemical properties, and textual quality of reconstituted rice was studied. The results revealed that, with the feed moisture increased (33 %-36 %), the gelatinization degree reached 97.28 % and the bound water content increased by 23.58 %. The water absorption index and swelling power index reached 8.35 g/g and 9.46 g/g, respectively, and the texture properties were close to those of native rice. Higher extrusion feed moisture (39 %-42 %) increased the setback value (206.00 cP) and breakdown value (721.33 cP) of starch, and the hardness and gumminess of reconstituted rice were also increased (p < 0.05). The starch crystalline structure was disrupted by extrusion and changed to a surface fractal structure, the relative crystallinity decreased from 26.87 % to 6.68 %, and the degree of order decreased from 1.680 to 1.006. Correlation analysis revealed that the crystalline structure of starch and water distribution would affect the textural and hydration properties of reconstituted rice. The results provide theoretical references and data support for improving the edibility and quality of reconstituted rice and enhancing the utilization rate of broken rice.

Effect of guar gum on the physicochemical properties and in vitro digestive characteristics of extruded starches

The present study assessed the impact of guar gum (GG) on the physical and chemical attributes and the in vitro digestibility of maize starch (MS), pea starch (PS), and sweet potato starch (SPS) subjected to extrusion treatment. Starch with 25 % moisture content and combined with GG in a 9:1 ratio was selected for extrusion. Scanning electron microscopy and differential scanning calorimetry reveal that extrusion disrupts the ordered structure of starch and induces aggregation of starch granules, resulting in a more cohesive structure, and GG addition led to the further evolution of this structure into a more intricate and irregular form. Rheological assessments demonstrated a remarkable enhancement in the gelatinization characteristics of starch with GG addition, which led to elevated flow resistance and increased viscosity. On evaluating the in vitro digestive characteristics, we noted that adding GG to starch augmented the levels of slow-digestible starch and resistant starch. Consequently, this resulted in diminished digestibility and a lowered glycemic index. In summary, GG synergistically interacts with starch, forming intricately assimilable components. Moreover, the effects of extrusion vary across different starches, which proves advantageous for SPS and GG amalgamation, thereby enhancing their resistant components. Conversely, extrusion manifests contrasting outcomes for MS and PS.

The properties of the rice resistant starch processing and its application in skimmed yogurt

Extrusion is typically employed to prepare resistant starch (RS). However, the process is complicated. In this study, the effects of twin-screw extrusion on the crystallinity, thermal properties, and functional properties of starch formed in different extrusion zones were investigated. The effects of this process on the rheological properties and microstructure of RS-added skimmed yogurt were also studied. According to the results, the RS content increased from 7.40 % in the raw material to 33.79 % in the extrudate. The A-type crystal structure of the starch was not observed. The dissociation temperature of the extruded starch ranged from 87.76 °C to 100.94 °C. The glycemic index (GI) of skimmed yogurt fortified with 0.4 % RS was 48.7, and the viscosity was also improved. The microstructure exhibited a uniform network of the starch-protein structure. The findings may serve as a theoretical basis for the application of RS in the food industry.

Recent advances in modified starch based biodegradable food packaging: A review

This study reviews the importance of resistant starch (RS) as the polymer of choice for biodegradable food packaging and highlights the RS types and modification methods for developing RS from native starch (NS). NS is used in packaging because of its vast availability, low cost and film forming capacity. However, application of starch is restricted due to its high moisture sensitivity and hydrophilic nature. The modification of NS into RS improves the film forming characteristics and extends the applications of starch into the formulation of packaging. The starch is blended with other bio-based polymers such as guar, konjac glucomannan, carrageenan, chitosan, xanthan gum and gelatin as well as active ingredients such as nanoparticles (NPs), plant extracts and essential oils to develop hybrid biodegradable packaging with reduced water vapor permeability (WVP), low gas transmission, enhanced antimicrobial activity and mechanical properties. Hybrid RS based active packaging is well known for its better film forming properties, crystalline structures, enhanced tensile strength, water resistance and thermal properties. This review concludes that RS, due to its better film forming ability and stability, can be utilized as polymer of choice in the formulation of biodegradable packaging.

Effects of Extrusion Technology on Physicochemical Properties and Microstructure of Rice Starch Added with Soy Protein Isolate and Whey Protein Isolate

In order to improve the retrogradation of rice starch (RS) and the quality of rice products, soy protein isolate (SPI), whey protein isolate (WPI), and rice flour were mixed and further extruded into mixed flour. The physicochemical properties and morphology of starch of extruded rice flour (ERS) and starch of extruded mixtures of SPI, WPI, and rice flour (SPI-WPI-ERS) were analyzed. The distribution of amylopectin chain length, molecular weight, microstructure, crystallinity, short-range ordered structure, pasting properties, and thermodynamic properties of RS, ERS, and SPI-WPI-ERS were measured. The results showed that, compared with rice starch, the proportion of long-chain starch, total starch content, and molecular weight were decreased in ERS and SPI-WPI-ERS, but the proportion of short-chain and amylose content was increased. The short-range order structure was destroyed. The water absorption of ERS and SPI-WPI-ERS was much higher than rice starch at 55 °C, 65 °C, and 75 °C, but lower than that of rice starch at 95 °C. Therefore, the retrogradation characteristics of SPI-WPI-ERS were improved. The setback of rice starch products was reduced and the setback of SPI-WPI-ERS was lower than that of ERS. Overall, the retrogradation of rice starch was delayed by adding exogenous protein and extrusion technology, and the application range of rice flour in staple food products was broadened.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Effect of plasma-activated water on the formation of endogenous wheat starch-lipid complexes during extrusion

The aim of this study was to investigate the effect of plasma-activated water (PAW) during extrusion on the formation of endogenous starch complexes with wheat starch (WS) as a model material. Using PAW during the extrusion process resulted in an increase in amylose content from 27.87 % to 30.07 %. Results from Fourier transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry indicated that the PAW facilitated the formation of endogenous starch-lipid complexes during extrusion. PAW120 (distilled water treated by plasma for 120 s) showed a better promotion effect than PAW60 (distilled water treated by plasma for 60 s). EWS120 (WS extruded using PAW120) exhibited lower peak viscosity and swelling power, but higher solubility, particle size, and resistant starch content compared with EWS0 (WS extruded using distilled water) and EWS60 (WS extruded using PAW60). In a word, the acidic substances in PAW may lead to hydrolysis of starch and generate more amylose, thus improving the amount of endogenous starch-lipid complexes. The present study provides a novel extrusion method to obtain modified starch with higher RS content than common extrusion, which has potential application in the industrial production of functional foods with low glycemic index.

Effect of Konjac Glucomannan on Structure, Physicochemical Properties, and In Vitro Digestibility of Yam Starch during Extrusion

In this study, the effect of konjac glucomannan (KGM, 0-5%) on the structure, physicochemical properties, and in vitro digestibility of extruded yam starch (EYS) was investigated. The EYS became rougher on the surface and the particle size increased as observed using scanning electron microscopy and particle size analysis. X-ray diffraction and Raman results revealed that the relative crystallinity (18.30% to 22.30%) of EYS increased, and the full width at half maxima at 480 cm-1 decreased with increasing KGM content, indicating the increment of long-range and short-range ordered structure. Differential scanning calorimetry and rheological results demonstrated that KGM enhanced thermal stability and the gel strength of EYS due to enhanced interaction between KGM and YS molecules. Additionally, a decrease in the swelling power and viscosity of EYS was observed with increased KGM content. The inclusion of KGM in the EYS increased the resistant starch content from 11.89% to 43.51%. This study provides a dual-modified method using extrusion and KGM for modified YS with high thermal stability, gel strength, and resistance to digestion.

Mechanism of feed moisture levels in extrusion treatment to improve the instant properties of Chinese yam (Dioscorea opposita Thunb.) flour

Extruded yam flour was prepared at different feed moisture to improve its instant properties. The water solubility index (WSI) and water absorption index (WAI) were used to compare the instant properties of yam flour. Their chemical compositions, particle size distribution, crystalline structure, and microscopic forms were also analyzed to assess the effects of feed moisture on the instant properties of yam flour. We found that extrusion significantly improved the instant properties of yam flour, while the WSI value increased from 29.50% to 71.86% and the WAI value decreased from 387.88% to 228.06% with decreased feed moisture. Extrusion led to the degradation of total starch and amylopectin, and the contents of soluble substances increased markedly. Extrusion destroyed the granular and crystalline structures, which were reconstituted as amylose-lipid complexes with a significant decrease in relative crystallinity. Increasing the feed moisture was beneficial to the flow and color retention, while lower feed moisture was more favorable to enhance the instant properties.

Processing of corn-based dog foods through pelleting, baking and extrusion and their effect on apparent total tract digestibility and colonic health of adult dogs

Different food processing parameters may alter starch granule structure and its cooking degree. With lower thermomechanical energy, more resistant starch (RS) is retained in the food, which may benefit gastrointestinal (GI) health. The objective of this study was to determine the effect of food processing on dietary utilization and dog gut health. Experimental diets containing 56% corn as the sole starch source were produced through pelleting, baking, and extrusion and compared to a baked control diet in which the corn was replaced with dextrose. The extruded diet resulted in the highest level (P < 0.05) of in vitro starch cook and lowest RS, while baked was intermediate and pelleted had the lowest starch cook and highest RS. To evaluate the in vivo effects of these treatments, 12 dogs were adapted to foods for 9 d, and feces were collected for 5 d in a replicated 4 × 4 Latin square design. Feces were scored for consistency using an ordinal scale, and parametric data included apparent digestibility (ATTD), parameters indicative of gut health, and the microbial composition, which was centered log-ratio transformed before operational taxonomic unit (OTU) analyses. Fecal scores were analyzed by ordinal logistic regression, and parametric data were analyzed as mixed models. Overall ATTD was greater (P < 0.05) in extruded, followed by baked and pelleted. Dogs fed the control had osmotic diarrhea, whereas dogs fed the other treatments had mostly acceptable fecal scores, with extrusion leading to the best fecal quality. The control also led to high fecal pH and low SCFAs, indicating dysbiosis. All corn foods had similar (P > 0.05) fecal SCFAs and extruded tended (P = 0.055) to promote higher fecal butyrate than baked and pelleted. The microbiome of dogs fed the corn foods had similar α diversity indices, and OTUs at the species and phyla levels were mostly alike and different from the control. In conclusion, the higher levels of in vitro RS did not translate into a better in vivo fermentation profile, and extruded kibble performed best regarding fecal quality, ATTD, and fecal SCFAs.

Understanding the multi-scale structure, physicochemical and digestive properties of extruded yam starch with plasma-activated water

In this study, the synergistic effect of plasma-activated water (PAW) combined with twin-screw extrusion (TSE) on multi-scale structure, physicochemical and digestive properties of yam starch (YS) was studied. PAW-TSE resulted in higher amylose content in YS than TSE alone. Compared with single TSE, the relative crystallinity, short-range ordered degree, and gelatinization enthalpy of YS were increased by PAW-TSE according to the results of X-ray diffraction, Fourier transform infrared, Raman spectroscopy, and differential scanning calorimetry. Furthermore, rapid viscosity and dynamic rheological analysis showed that the peak and breakdown viscosity of PAW-TSE treated YS paste were considerably reduced, and the storage modulus and loss modulus were significantly increased, indicating that the gel strength and thermal stability were improved. In addition, the resistant starch (RS) content of YS treated by PAW-TSE increased from 6.04 % to 21.21 %. Notably, the effect of PAW-TSE on YS enhanced with the preparation time of PAW increased. Finally, correlation analysis indicated that the characteristic indexes of PAW had a significant impact on the long or short-range ordered structure, thermal properties, and in vitro digestibility of YS during extrusion. Therefore, PAW-TSE, as an emerging dual modification technology, will greatly expand the application of extrusion technology.

Microstructural, physicochemical properties and starch digestibility of brown rice flour treated with extrusion and heat moisture

Effects of heat moisture treatment (HMT), extrusion treatment (ET), and the combination treatment (HMT-ET) on microstructural, physicochemical properties, and starch digestibility of brown rice flour (BRF) were investigated. With a rise in resistant starch (RS), melting temperature, and a decrease in swelling capacity (SC), peak viscosity, and apparent amylose content (AAC), the HMT-ET BRF showed a significant lower expected glycemic index (eGI) than HMT and ET. XRD and FTIR results showed ET, HMT-ET caused the transition of starch crystals from amorphous to crystalline region, suggesting the formation of the starch-lipid complex. The analysis of DSC and RVA proved HMT-ET flours induced starch gelatinization and inhibited the starch retrogradation of BRF compared with the other three flours. Correlation analysis suggested that the combined effect of HMT and ET was response for the changes in physicochemical properties and reduction of in vitro starch digestibility. Overall, the BRF after HMT-ET with improved physicochemical properties and starch digestibility could be better utilized as a good substitute for carbohydrate sources.

Effects of Extruded Corn with Different Gelatinization Degrees on Feed Preference, Growth Performance, Nutrient Digestibility, and Fecal Microbiota of Weaning Piglets

Preference and performance trials were conducted to investigate the effects of extruded corn with different degrees of gelatinization on the feed preference, growth performance, nutrient digestibility, and fecal microbiota of weaning piglets. In the preference trial, 144 piglets who were 35 days old were weighed and allotted to six treatments with four replications per treatment. Piglets in each treatment group were allowed to choose two of the following four corn-supplemented diets: conventional corn (NC) or extruded corn with low (LEC; 41.82% gelatinization), medium (MEC; 62.60% gelatinization), or high (HEC; 89.93% gelatinization) degrees of gelatinization for 18 days. The results showed that the piglets preferred diets supplemented with a low degree of gelatinization of extruded corn. In the performance trial, 144 piglets who were 35 days old were weighed and allotted into four treatments with six replications per treatment. Piglets in each treatment were fed one of the four diets for 28 days. The results showed that LEC and MEC decreased the feed:gain ratio at 14-28 days and 0-28 days, respectively, and increased the apparent total tract digestibility (ATTD) of crude protein compared with NC. Meanwhile, LEC increased the total protein and globulin content in the plasma on day 14, and MEC increased the ATTD of ether extract (EE) compared with NC. Extruded corn with low and medium degrees of gelatinization increased the abundance of Bacteroidetes at the phylum level and Lactobacillus, Alloprevotella, Prevotellaceae_UCG-03, and Prevotella_2 at the genus level. The results showed that extruded corn can improve feed preference, increase growth performance and nutrient digestibility, and modify gut microbiota, and the ideal degree of gelatinization is approximately 41.82-62.60%.

A Mini Review of Physicochemical Properties of Starch and Flour by Using Hydrothermal Treatment

Starch and flour from various plants have been widely used for sundry applications, especially in the food and chemical industries. However, native starch and flour have several weaknesses, especially in functional, pasting, and physicochemical properties. The quality of native starch and flour can be improved by a modification process. The type of modification that is safe, easy, and efficient is physical modification using hydrothermal treatment techniques, including heat moisture treatment (HMT) and annealing (ANN). This review discusses the hydrothermal modifications of starch and flour, especially from various tubers and cereals. The discussion is mainly on its effect on five parameters, namely functional properties, morphology, pasting properties, crystallinity, and thermal properties. Modification of HMT and ANN, in general, can improve the functional properties, causing cracking of the granule surface, stable viscosity to heat, increasing crystallinity, and increasing gelatinization temperature. However, some modifications of starch and flour by HMT and ANN had no effect on several parameters or even had the opposite effect. The summary of the various studies reviewed can be a reference for the development of hydrothermal-modified starch and flour applications for various industries.

Phenolic Release during In Vitro Digestion of Cold and Hot Extruded Noodles Supplemented with Starch and Phenolic Extracts

Dietary phenolic compounds must be released from the food matrix in the gastrointestinal tract to play a bioactive role, the release of which is interfered with by food structure. The release of phenolics (unbound and bound) of cold and hot extruded noodles enriched with phenolics (2.0%) during simulated in vitro gastrointestinal digestion was investigated. Bound phenolic content and X-ray diffraction (XRD) analysis were utilized to characterize the intensity and manner of starch-phenolic complexation during the preparation of extruded noodles. Hot extrusion induced the formation of more complexes, especially the V-type inclusion complexes, with a higher proportion of bound phenolics than cold extrusion, contributing to a more controlled release of phenolics along with slower starch digestion. For instance, during simulated small intestinal digestion, less unbound phenolics (59.4%) were released from hot extruded phenolic-enhanced noodles than from the corresponding cold extruded noodles (68.2%). This is similar to the release behavior of bound phenolics, that cold extruded noodles released more bound phenolics (56.5%) than hot extruded noodles (41.9%). For noodles extruded with rutin, the release of unbound rutin from hot extruded noodles and cold extruded noodles was 63.6% and 79.0%, respectively, in the small intestine phase, and bound rutin was released at a much lower amount from the hot extruded noodles (55.8%) than from the cold extruded noodles (89.7%). Hot extrusion may allow more potential bioaccessible phenolics (such as rutin), further improving the development of starchy foods enriched with controlled phenolics.

Effect of Resistant Starch Sources on the Physical Properties of Dough and on the Eating Quality and Glycemic Index of Salted Noodles

The aim of this study was to evaluate the characteristics and eating quality of salted noodles that are incorporated with different formulations of flour. Up to 20% of wheat flour was substituted by composite flours of highly resistant starches, including heat moisture treatment corn starch (HMT-CS), high-amylose corn starch (Hylon VII), and green banana flour (GBF). The physical properties of dough, in conjunction with the eating quality and estimated glycemic index (EGI) of cooked salted noodles, were investigated in this study. The results concluded that the incorporation of GBF, HMT, and Hylon VII not only affected the water absorption and mixing tolerance of the dough, but also the maximum resistance to extension and extensibility in terms of the extensographic properties. Meanwhile, GBF, HMT, and Hylon VII incorporation significantly increased the resistant starch content and decreased the fat content of the noodle samples. The textural profile analyses of cooked salted noodles indicated that hardness, gumminess, chewiness, and shearing force increased; nevertheless, springiness declined with the increase in the proportion of flours from 10 to 20%. The sensory evaluation detected that wheat flour composited with 10% GBF and HMT flours could produce acceptable quality noodles as compared with normal typical control noodles. In the meantime, salted noodles incorporated with GBF, HMT-CS, and Hylon VII flour decreased the estimated glycemic index (EGI) dramatically. The result of this study concluded that incorporation of various sources of resistant starch flour could develop a low-GI noodle with good acceptability that may contribute to gastrointestinal health.

Processing, digestion property and structure characterization of slowly digestible gorgon nut starch

Slowly digestible gorgon nut starch (GN-SDS) was prepared by heating-cooling treatment (HCT), meanwhile its morphological and structural features were characterized in detail by SEM, DSC, XRD and IR detection. The optimized parameters of GN-SDS processing were as following: starch milk (20%) was heated at 100 °C for 20 min, and then cooled under 4 °C for 24 h. Under the optimized parameters, the SDS content increased from 20.49 to 61.74%. GN-SDS showed typical SDS characteristics in in vivo digestion with a low postprandial blood glucose. SEM images suggested that GN-S particles changed from uniform regular polyhedron with smooth surface to irregular gravel-like particles with coarse surface and obvious layered structure inside after HCT. The results of SEM, DSC, XRD and IR determination indicated that HCT changed the granule morphology, interior structure, gelatinization temperature and crystal type (A to B-type) of GN-S, and therefore made it hard to be digested accordingly.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10068-021-01007-6.

Advances in pretreatment of lignocellulosic biomass for bioenergy production: Challenges and perspectives

As a clean and renewable energy, bioenergy is one of the most promising alternatives to fossil fuels. Lignocellulose possesses great potential for bioenergy production, but the recalcitrant and heterogeneous structure limits its application. Pretreatment technology offers an effective solution to fractionate the main components of the lignocellulose and uncover the available cellulose. The obtained feedstock can be applied to bioconversion into energy, e.g., bioethanol, biogas, biohydrogen, etc. Here, the current state of lignocellulose pretreatment technologies was comprehensively reviewed, the advances in bioenergy production from pretreated lignocellulose was described, with particular attention to key challenges involved. Several new strategies for overcoming pretreatment barriers to realize highly efficient lignocellulose bioconversion were highlighted. The insights given in this review will facilitate further development on lignocellulosic bioenergy production, towards addressing the global energy crisis and climate change related to the use of fossil fuels.

Physical modification of starch by heat-moisture treatment and annealing and their applications: A review

Heat-moisture treatment (HMT) and annealing are hydrothermal starch modifications. HMT is performed using high temperature and low moisture content range, whereas annealing uses excess of water, a long period of time, and temperature above the glass transition and below the gelatinization temperature. This review focuses on: research advances; the effect of HMT and annealing on starch structure and most important properties; combined modifications; and HMT-starch and annealed-starch applications. Annealing and HMT can be performed together or combined with other modifications. These combinations contribute to new applications in different areas. The annealed and HMT-starches can be used for pasta, candy, bakery products, films, nanocrystals, and nanoparticles. HMT has been studied on starch digestibility and promising data have been reported, due to increased content of slowly digestible and resistant starches. The starch industry is in constant expansion, and modification processes increase its versatility, adapting it for different purposes in food industries.

Effects of different moisture contents on the structure and properties of corn starch during extrusion

Herein, corn starch samples with different moisture contents (native corn starch, 30, 35, 40, 45, and 50%) were prepared by twin-screw extrusion, and the structural and physical properties were analyzed and correlated. Scanning electron microscopy observed the morphology, attenuated total reflection-Fourier transform infrared spectroscopy investigated the double helix structure, X-ray diffraction analyzed the crystal region, ion chromatography observed the chain length distribution, and rapid viscosity analyzer measured the viscosity of corn starch samples. We found that the corn starch crystallinity, degree of order, and double helix degree decreased with increasing moisture content. The moisture content has a crucial role in the peak viscosity, breakdown, final viscosity, and setback in pasting property experiments. With the increase in moisture content, the longer chain was transformed into a shorter chain, and the dispersion of molecular weight distribution continuously increased. This study provides a theoretical basis for the production of extruded corn starch.

Heating-cooling extrusion cycles as a method to improve the physicochemical properties of extruded corn starch

This work proposed a controlled method to modify the physicochemical properties of corn starch through heating and cooling extrusion (HCE) cycles. It was used native corn starch adjusted to 60% moisture. It was then subjected to 5 HCE cycles at 100 and 125 °C, at 10 rpm. Water absorption index (WAI), water solubility index (WSI), resistant starch (RS), thermal properties, viscosity, FTIR, and X-ray were evaluated. For WAI and WSI, a gradual increase was observed on each HCE cycle. Thermal properties shown that enthalpy decrease with each HCE cycles due to more gelatinization. Viscosity properties shown a thermally stable starch conditions being directly proportional to HCE cycles. The RS increased for each 5 HCE. XRD revealed that HCE cycle changed the starch structure from an orthorhombic structure to V-type crystalline structure. Finally, it was concluded that HCE cycles is a method to produce corn starch with controlled physicochemical properties.

Microparticle prepared by chitosan coating on the extruded mixture of corn starch, resveratrol, and α-amylase controlled the resveratrol release

Microcapsule was developed by chitosan coating on the microparticle which was prepared by smashing the extruded mixture of corn starch, resveratrol, and α-amylase. In the preparation process, the low-temperature extrusion and α-amylase were employed to overcome the disadvantages of low gelatinization, dissolution, and poor hydration of extruded starch. Chitosan-coating retarded starch aging, improved the stability of microcapsules, delayed the release of resveratrol. Considering the bioactive functions of chitosan, microcapsules also obtained the functions of chitosan by chitosan coating. The chitosan coating and α-amylase addition improved the release ratio of resveratrol. CESRA (chitosan solution (2%) coating on the extruded mixture of corn starch, resveratrol, and α-amylase) released 86.8% resveratrol at 25 °C in six days chasing, and 85.3% resveratrol at 37 °C in 48 h chasing. Chitosan coating slightly improved the free radical scavenging activity of ABTS⁺. The particle size variation, SEM, XRD, and FT-IR were also employed to investigate the variation of morphology, crystal structure, and chemical composition.

Extrusion Process as an Alternative to Improve Pulses Products Consumption. A Review

The development of new food products obtained by extrusion processing has increased in recent years. Extrusion is used by the food industry to produce a wide variety of food products, such as ready-to-eat foods (e.g., snacks), among others. Pulses have also gained popularity as novel food ingredients in the formulation of a variety of food and food products, due to their high content of macro and micronutrients, and bioactive compounds that improve the nutritional and functional properties of the final food products. In this review, the impact of extrusion variables on proteins, carbohydrates, vitamins, phenolics and antinutritional compounds in pulses and pulse-based formulations are highlighted. Particularly, the impact of the specific mechanical energy. Also, the preservation, increase and/or reduction in those functional compounds, as a consequence of different extrusion processing conditions, are discussed.

Advances in Valorization of Lignocellulosic Biomass towards Energy Generation

The booming demand for energy across the world, especially for petroleum-based fuels, has led to the search for a long-term solution as a perfect source of sustainable energy. Lignocellulosic biomass resolves this obstacle as it is a readily available, inexpensive, and renewable fuel source that fulfills the criteria of sustainability. Valorization of lignocellulosic biomass and its components into value-added products maximizes the energy output and promotes the approach of lignocellulosic biorefinery. However, disruption of the recalcitrant structure of lignocellulosic biomass (LCB) via pretreatment technologies is costly and power-/heat-consuming. Therefore, devising an effective pretreatment method is a challenge. Likewise, the thermochemical and biological lignocellulosic conversion poses problems of efficiency, operational costs, and energy consumption. The advent of integrated technologies would probably resolve this problem. However, it is yet to be explored how to make it applicable at a commercial scale. This article will concisely review basic concepts of lignocellulosic composition and the routes opted by them to produce bioenergy. Moreover, it will also discuss the pros and cons of the pretreatment and conversion methods of lignocellulosic biomass. This critical analysis will bring to light the solutions for efficient and cost-effective conversion of lignocellulosic biomass that would pave the way for the development of sustainable energy systems.

Modifying Effects of Physical Processes on Starch and Dietary Fiber Content of Foodstuffs

Carbohydrates are one of the most important nutrients in human consumption. The digestible part of carbohydrates has a significant role in maintaining the energy status of the body and the non-digestible parts like dietary fibers have specific nutritional functions. One of the key issues of food processing is how to influence the technological and nutritional properties of carbohydrates to meet modern dietary requirements more effectively, considering particularly the trends in the behavior of people and food-related health issues. Physical processing methods have several advantages compared to the chemical methods, where chemical reagents, such as acids or enzymes, are used for the modification of components. Furthermore, in most cases, these is no need to apply them supplementarily in the technology, only a moderate modification of current technology can result in significant changes in dietary properties. This review summarizes the novel results about the nutritional and technological effects of physical food processing influencing the starch and dietary fiber content of plant-derived foodstuffs.

Dual modification of various starches: Synthesis, properties and applications

The problems associated with native starches (NSs) and single modified starches were stated in order to justify dual modification of various starches. Broadly, there are two types of dual modification, i.e., homogeneous dual modification and heterogeneous dual modification. The combination of two physical modifications, e.g., (extrusion/annealing); two chemical modifications, e.g., (succinylation/cross-linking) and two enzymes modification (α-amylase/pullulanase) falls under the former classification and the latter classification is the combination of two of each of the differently stated modifications, e.g., acetylation/annealing, extrusion/succinylation, and microwave-assisted phosphorylation, etc. The classification, synthesis, properties and applications of dually modified starches were discussed. There is an attempt to elucidate the problems of each of the single modification in order to justify dual modifications. In dual modifications, the order of reactions, the reaction conditions, the medium of reaction, and the botanical sources of the various starches are very important parameters.

Extrusion and nixtamalization conditions influence the magnitude of change in the nutrients and bioactive components of cereals and legumes

Cereal and legume diets make up the bulk of caloric sources for a majority of households in the developing world. They contain macro- and micronutrients as well as phytochemicals embedded as one matrix. Some phytochemicals are antinutritional factors which can bind nutrients thereby hindering their bioavailability. While there are other methods that can be used to enhance nutrient utilization from such foods, we summarize how food processing methods such as extrusion and nixtamalization are employed to break the food matrix and release these nutrients. Both extrusion and nixtamalization can break down complex carbohydrates into simpler, more soluble forms while at the same time inactivating or denaturing protein inhibitors and other antinutritional factors. Such disruptions of complexes within the food matrix are essential for harnessing optimum nutritional and health benefit from these foods. We present mechanistic approaches explaining how these processes enhance nutrient and mineral bioavailability and phytochemical bioactivity while minimizing the undesirable effects of antinutritional factors that coexist in the complex food matrix.

Recent advances in the pretreatment of microalgal and lignocellulosic biomass: A comprehensive review

Microalgal and lignocellulosic biomass is the most sumptuous renewable bioresource raw material existing on earth. Recently, the bioconversion of biomass into biofuels have received significant attention replacing fossil fuels. Pretreatment of biomass is a critical process in the conversion due to the nature and structure of the biomass cell wall that is complex. Although green technologies for biofuel production are advancing, the productivity and yield from these techniques are low. Over the past years, various pretreatment techniques have been developed and successfully employed to improve the technology. This paper presents an in-depth review of the recent advancement of pretreatment methods focusing on microalgal and lignocellulosic biomass. The technological approaches involving physical, chemical, biological and other latest pretreatment methods are reviewed.