Crystal violet dye removal using crosslinked grafted xanthan gum

Eco-friendly, magnetic NiFe₂O₄@sodium alginate-g-poly(3-aminophenol) nanocatalyst for synthesizing bioactive polyhydroquinolines with antioxidant, antibacterial, and anticancer properties

A nickel ferrite@sodium alginate-grafted-poly(3-aminophenol)@MXene (NiFe₂O₄@Na-Alg-g-P3AP@MXene) nanocomposite has been developed through three critical steps: (1) synthesizing NiFe₂O₄ nanoparticles via co-precipitation, (2) preparing Ti₃C₂ MXene by selective etching of aluminum from Ti₃AlC₂, and (3) integrating MXene and nickel ferrite into the nanocomposite via in situ polymerization. The catalyst was comprehensively characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). The NiFe₂O₄@Na-Alg-g-P3AP@MXene nanocomposite exhibited outstanding catalytic performance in synthesizing novel polyhydroquinolines (PHQs). These derivatives were obtained in excellent yields (85-95 %) using alkylene-bridged bis-aldehydes, 4-formylphenyl 4-methylbenzenesulfonate, and 3-aryl-pyrazole-4-carbaldehyde under optimized conditions, with remarkably short reaction times (40-90 min). The synthesized PHQ derivatives demonstrated potent antioxidant activity (85.3-98.3 % inhibition) and broad-spectrum antibacterial efficacy against Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Salmonella enteritidis. Furthermore, the nanocomposite catalyst displayed exceptional stability and reusability, retaining >90 % efficiency over five consecutive catalytic cycles. Notably, the polyhydroquinolines also exhibited prominent anticancer activity against MCF-7 breast cancer cells.

Immobilization of Trametes versicolor laccase on LDH/alginate composite beads for improved textile dyes decolorization

Laccase is an oxido-reductase known for its applications in biomass valorization (lignin depolymerization), in fine chemicals (building-blocks synthesis) or in environment (wastewater treatment). It works with molecular oxygen and produces water as its only by-product. However, its practical use remains limited due to the low stability and poor reusability of free laccase. To overcome these challenges, laccase from Trametes versicolor was immobilized onto layered double hydroxide and alginate composite beads by a glutaraldehyde cross-linker to create an easily separable and stable enzyme. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD) and energy-dispersive X-ray spectroscopy (EDX) were used to characterize the as-synthesized composite beads (laccase@MgFe(LDH)/alginate). The activity of the immobilized laccase was measured with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) model substrate. Here, the optimal conditions of laccase immobilization were explored and the effects of various conditions of immobilization, pH, storage stability and thermal resistance of the (laccase@MgFe(LDH)/alginate) were also studied. The results revealed that the optimal conditions for laccase immobilization were a concentration of glutaraldehyde of 2.5 %, an amount of laccase (0.5 U/mg) of 2 mg/mL, and an immobilization time of 6 h. The stability of (laccase@MgFe(LDH)/alginate) was >70 % of its initial activity, even after 10 cycles. The study of dye decolorization showed up to 74 % of methylene blue (MB) and 69 % of Crystal violet (CV) degradation, suggesting the use of immobilized laccase on MgFe(LDH)/alginate composite beads as a promising and environmentally friendly tool for the degradation of environmental pollutants, in particular for the removal of textile dyes from wastewater.

Recent developments in conductive polysaccharide adsorbent formulations for environmental remediation: A review

Environmental remediation is crucial for human life and ecosystems, involving the cleanup of contaminated water to protect health and restore ecological balance. However, rapid industrialization and population growth have worsened pollution, particularly in water bodies, making effective wastewater treatment a key challenge in ensuring clean drinking water, and the adsorption of toxic gases for air treatment are the main strategies for environmental remediation. Among the various treatment methods, adsorption stands out for its high selectivity, low energy and chemical use, ease of operation, and cost-effectiveness. To date, innovative, highly efficient, non-toxic, engineered adsorbent materials have received potential interest from scientific and governmental communities. Conducting polymer-modified polysaccharide formulations are crucial in wastewater treatment due to their high surface area, adsorption efficiency, excellent stability, and eco-friendly, biodegradable properties. This review offers an extensive overview of recent progress in synthesizing conducting polymer-modified polysaccharide formulations (hydrogels, aerogels, nanofibers, and nanocomposites) for capturing toxic heavy metal ions, organic dyes, pharmaceuticals, phenols as well as adsorbing different toxic gases using various adsorption mechanisms. It also emphasizes the integration of different nanofillers, including carbon-based materials, Mxenes, nanoclay, metal/metal oxides, and hybrid nanomaterials, into conductive polysaccharide chains to improve their physicochemical properties and adsorption efficiency. The reported data showed that these engineered adsorbent materials based on conductive polysaccharide formulations have immense potential for wastewater treatment applications, offering more effective and sustainable solutions.

The efficient chitosan-polythiophene-graphene oxide bionanocomposite with enhanced antibacterial activity, dye adsorption ability, mechanical and thermal properties

Water pollution is the most serious environmental issues due to toxic impurity such as dye and pathogenic microorganisms. The main goal of the present study is to produce a novel ternary chitosan-polythiophene-graphene oxide (CS-PTh-GO) bionanocomposites using the intercalation of GO into CS through solution mixing process followed by the in-situ polymerization of thiophene for removal of dye and killing microorganisms from an aqueous solution. The fabricated CS-PTh-GOs were characteristically examined via FTIR, XRD, SEM, TEM, TGA, tensile analysis and subsequently applied for adsorption of cationic dyes such as methylene blue (MB) in the dark or under light and killing the growth of Gram-positive and Gram-negative microorganisms. The data revealed that presence of PTh-GO enhanced the surface roughness, tensile strength, thermal stability, adsorption characteristics and antibacterial activity. The CS-PTh-GO showed 97% dye removal of MB in 50 min. Ultimately, the CS-PTh-GO bionanocomposites analysis against the growth of Staphylococcus aureus, and Escherichia coli manifesting a minimum inhibitory concentration (MIC) of 5 µg/mL, respectively. Thus, the CS-PTh-GO bionanocomposite has the potential to use as an efficient adaptable antimicrobial and dye absorbent of organic dyes in industrial wastewater.

Biofabrication of zinc oxide nanoparticles using Moringa oleifera, characterization and statistical optimization for their application in crystal violet adsorption

Crystal violet (Cry) is an essential textile dye belonging to the triphenylmethane group, that is widely used in the textile industry. It is also applied for paper printing and Gram staining. Previously, it was significant as a topical antiseptic due to its antibacterial, antifungal, and anthelmintic properties. Despite its various applications, crystal violet has been recognized as a biohazard dye due to its toxic and carcinogenic properties. It persists in the environment with long-lasting effects and has detrimental impacts. In this research, water extract from Moringa oleifera leaves is employed as environmentally friendly methods to synthesize zinc oxide nanoparticles (Mo/ZnO-NPs), and characterized by TEM, EDX, FT-IR, and Zeta potential. Mo/ZnO-NPs exhibit a Zeta potential of - 21.9 mV, and X-ray diffraction (XRD) analysis confirms their crystallographic structure. The size of the biogenic Mo/ZnO-NPs ranges from 5.52 to 41.59 nm. This study was designed to estimate and maximize the ability of Mo/ZnO-NPs to remove crystal violet using Central Composite Design (CCD), considering pH (ranging from 3 to 11), incubation time (ranging from 30 to 150), nanoparticles concentrations (ranging from 0.2 to 1.8 mg/mL), and crystal violet concentrations (ranging from 25 to 125 ppm). The maximum percentage value of removal of crystal violet by Mo/ZnO-NPs was 97.26 with optimal conditions of pH 9, incubation time 120 min, Mo/ZnO-NPs 1.4 mg/mL, and crystal violet concentration of 50 ppm. The best-predicted conditions that caused the highest removal of crystal violet (97.8%) were determined using the desirability function as pH 10, incubation time of 140 min, Mo/ZnO-NPs concentrations of 1.3 mg/mL, and a concentration of crystal violet of 80 ppm. Under these optimal conditions, the maximum experimental crystal violet removal% by Mo/ZnO-NPs was (98.7%) was verified. Mo/ZnO-NPs synthesized by Moringa oleifera can be a promising candidate for the adsorption of crystal violet.

Exploration of supramolecular solvent-based microextraction for crystal violet detecting in water samples

This approach highlights the advantages of supramolecular solvents in a new microextraction model. The distinct properties and behavior of this supramolecular solvent provide enhanced extraction capabilities for detecting crystal violet (CV) in water samples. The methodical experimentation was executed to optimize the critical process parameters, providing maximum efficiency of crystal violet extraction at optimal conditions with pH set at 2.7, 186 μL of extraction solvent, extraction time of 3.5 min, and a salt amount of 3.1 % w/v, yielding the best results. Analytical data from extraction experiments under these optimal conditions demonstrated a high extraction percentage. The extraction model exhibited a linear response within the range of 10-800 ng mL-1 of crystal violet, with a detection limit of 2 ng mL-1. This model enables the measurement of CV in water samples with recovery rates exceeding 97 %, offering a straightforward and accessible approach for analysis.

Starch-based self-assembled three-dimensional network nanostructure materials for sustainable cascade adsorption

Toward the development of a sustainable utilization strategy for adsorption materials, a starch-based adsorbent starch-chitosan-tannic acid (St-CTS-TA) with a three-dimensional (3D) structure was fabricated in water via electrostatic and hydrogen bonding reactions between St, CTS, and TA without using toxic reducing agents or special instruments. St-CTS-TA demonstrated a high specific surface area of 37 m2/g as well as a mesoporous/macroporous distribution ranging from 30 to 80 nm, which enhanced the mass transfer of adsorbate and the exposure of catechol groups in TA. The Langmuir isotherm adsorption model revealed that the highest adsorption capacities of St-CTS-TA for Fe3+ and Co2+ were 1678.2 and 944.8 mg/g, respectively. Surprisingly, the specific surface area of St-CTS-TA increased from 37 to 87 and 42 m2/g after Fe3+ and Co2+ adsorption, respectively, and the resulting St-CTS-TA-Fe and St-CTS-TA-Co could continuously adsorb basic fuchsin (BF) and rhodamine B (RhB). The adsorption capacities of St-CTS-TA-Fe and St-CTS-TA-Co for BF/RhB were found to be 1854.79/401.19 mg/g and 2229.77/537.49 mg/g, respectively, based on the Langmuir isotherm adsorption model.

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

Ordered Mesoporous Carbon as Adsorbent for the Removal of a Triphenylmethane Dye from Its Aqueous Solutions

A nanostructured material, ordered mesoporous carbon (OMC), was synthesised in metal- and halide-free form and its use for the sequestration of crystal violet, a hazardous triphenylmethane dye, is reported for the first time. The OMC material is characterised using scanning transmission electron microscopy with energy-dispersive spectroscopy for chemical analysis, by Fourier-transform infrared spectroscopy, and by nitrogen gas physisorption. The ideal conditions for the uptake of crystal violet dye were determined in batch experiments covering the standard parameters: pH, concentration, contact time, and adsorbent dosage. Experimental data are validated by applying Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherms. The thermodynamic parameters, ΔH°, ΔG°, and ΔS°, are calculated and it has been found that the adsorption process is spontaneous and endothermic with increasing disorder. An in-depth analysis of the kinetics of the adsorption process, order of the reaction and corresponding values of the rate constants was performed. The adsorption of crystal violet over OMC has been found to follow pseudo-second-order kinetics through a film diffusion process at all temperatures studied. Continuous flow column operations were performed using fixed bed adsorption. Parameters including percentage saturation of the OMC bed are evaluated. The exhausted column was regenerated through a desorption process and column efficiency was determined.

Deep Cleaning of Crystal Violet and Methylene Blue Dyes from Aqueous Solution by Dextran-Based Cryogel Adsorbents

Polysaccharides have recently attracted growing attention as adsorbents for various pollutants, since they can be extracted from a variety of renewable sources at low cost. An interesting hydrophilic and biodegradable polysaccharide is dextran (Dx), which is well-known for its applications in the food industry and in medicine. To extend the application range of this biopolymer, in this study, we investigated the removal of crystal violet (CV) and methylene blue (MB) dyes from an aqueous solution by Dx-based cryogels using the batch technique. The cryogel adsorbents, consisting of cross-linked Dx embedding a polyphenolic (PF) extract of spruce bark, were prepared by the freeze-thawing approach. It was shown that the incorporation of PF into the Dx-based matrix induced a decrease in porosity, pore sizes and swelling ratio values. Moreover, the average pore sizes of the DxPF cryogels loaded with dyes further decreased from 42.30 ± 7.96 μm to 23.68 ± 2.69 μm, indicating a strong interaction between the functional groups of the cryogel matrix and those of the dye molecules. The sorption performances of the DxPF adsorbents were evaluated in comparison to those of the Dx cryogels and of the PF extract. The experimental sorption capacities of the DxPF cryogel adsorbents were higher in comparison to those of the Dx cryogels and the PF extract. The DxPF cryogels, particularly those with the highest PF contents (sample DxPF2), demonstrated sorption capacities of 1.2779 ± 0.0703 mmol·g-1, for CV, and 0.3238 ± 0.0121 mmol·g-1, for MB. The sorption mechanisms were analyzed using mathematical models, including Langmuir, Freundlich, Sips and Dubinin-Radushkevich isotherms, and kinetic models, like pseudo-first-order (PFO), pseudo-second-order (PSO), Elovich and intra-particle diffusion (IPD). The sorption process was best described by the Sips isotherm and PSO kinetic models, indicating chemisorption as the dominant mechanism. This study outlines the importance of developing advanced renewable materials for environmental applications.

Constructing the synergistic effects of chitosan and ionic liquid on SPEEK polymer for efficient adsorption of crystal violet dye

In the study, a novel chitosan biopolymer and 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid (IL)-incorporated sulfonated poly (ether ether ketone) (SPEEK) composite (Ch-IL@SPEEK) was prepared for adsorption of cationic crystal violet (CV) dye. The proposed composite was well characterized by several techniques. CV adsorption performance was examined via batch studies by varying various variables involving adsorbent dosage, contact time pH and temperature. The isotherm results were demonstrated the adsorption characters of the processes were Langmuirian. The maximum adsorption capacity was determined as 77.66 mg g-1 for the composite which was significantly higher than SPEEK (qmax = 45.36 mg g-1). The determined equilibrium time of the operated system was 360 min and the kinetic model was assessed as Elovich. At low pHs the protonated surface groups repelled the positively charged CV and the adsorption rate increased with increasing pH. The process is spontaneous and favorable as it proceeds via endothermic interactions. Furthermore, even at the end of 5 successful adsorption cycles, 77.86 % CV removal was obtained. Remarkable efficiencies were also achieved in the removal performance of different organic pollutants. Based on the reported results, Ch-IL@SPEEK composite were exhibited as an impressive adsorbent material for adsorption processes.

Review on emerging trends and challenges in the modification of xanthan gum for various applications

This review explores the realm of structural modifications and broad spectrum of their potential applications, with a special focus on the synthesis of xanthan gum derivatives through graft copolymerization methods. It delves into the creation of these derivatives by attaching functional groups (-OH and -COOH) to xanthan gum, utilizing a variety of initiators for grafting, and examining their diverse applications, especially in the areas of food packaging, pharmaceuticals, wastewater treatment, and antimicrobial activities. Xanthan gum is a biocompatible, biodegradable, less toxic, bioactive, and cost-effective natural polymer derived from Xanthomonas species. The native properties of xanthan gum can be improved by cross-linking, grafting, curing, blending, and various modification techniques. Grafted xanthan gum has excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing ability. Owing to its remarkable properties, such as biocompatibility and its ability to form gels resembling the extracellular matrix of tissues, modified xanthan gum finds extensive utility across biomedicine, engineering, and the food industry. Furthermore, the review also covers various modified derivatives of xanthan gum that exhibit excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing abilities. These applications could serve as important resources for a wide range of industries in future product development.

Novel high-efficient adsorbent based on modified gelatin/montmorillonite nanocomposite for removal of malachite green dye

Shortage of drinking water has gained potential interest over the last few decades. Discharged industrial effluent, including various toxic pollutants, to water surfaces is one of the most serious environmental issues. The adsorption technique has become a widely studied method for the removal of toxic pollutants, specifically synthetic dyes, from wastewater due to its cost-effectiveness, high selectivity, and ease of operation. In this study, a novel gelatin-crosslinked-poly(acrylamide-co-itaconic acid)/montmorillonite (MMT) nanoclay nanocomposites-based adsorbent has been prepared for removing malachite green (MG) dye from an aqueous solution. Modified gelatin nanocomposites were synthesized using a free-radical polymerization technique in the presence and absence of MMT. Various analytical instrumentation: including FTIR, FESEM, XRD, and TEM techniques were used to elucidate the chemical structure and surface morphology of the prepared samples. Using a batch adsorption experiment, Langmuir isotherm model showed that the prepared modified gelatin nanocomposite had a maximum adsorption capacity of 950.5 mg/g using 350 mg/L of MG dye at pH 9 within 45 min. Furthermore, the regeneration study showed good recyclability for the obtained nanocomposite through four consecutive reusable cycles. Therefore, the fabricated gelatin nanocomposite is an attractive adsorbent for MG dye elimination from aqueous solutions.

Advances in gum-based hydrogels and their environmental applications

Gum-based hydrogels (GBHs) have been widely employed in diverse water purification processes due to their environmental properties, and high absorption capacity. More desired properties of GBHs such as biodegradability, biocompatibility, material cost, simplicity of manufacture, and wide range of uses have converted them into promising materials in water treatment processes. In this review, we explored the application of GBHs to remove pollutants from contaminated waters. Water resources are constantly being contaminated by a variety of harmful effluents such as heavy metals, dyes, and other dangerous substances. A practical way to remove chemical waste from water as a vital component is surface adsorption. Currently, hydrogels, three-dimensional polymeric networks, are quite popular for adsorption. They have more extensive uses in several industries, including biomedicine, water purification, agriculture, sanitary products, and biosensors. This review will help the researcher to understand the research gaps and drawbacks in this field, which will lead to further developments in the future.

Ice-Templated and Cross-Linked Xanthan-Based Hydrogels: Towards Tailor-Made Properties

The use of polysaccharides with good film-forming properties in food packaging systems is a promising area of research. Xanthan gum (XG), an extracellular polysaccharide, has many industrial uses, including as a common food additive (E415). It is an effective thickening agent, emulsifier, and stabilizer that prevents ingredients from separating. Nevertheless, XG-based polymer films have some disadvantages, such as poor mechanical properties and high hydrophilic features, which reduce their stability when exposed to moisture and create difficulties in processing and handling. Thus, the objective of this work was to stabilize a XG matrix by cross-linking it with glycerol diglycidyl ether, 1,4-butanediol diglycidyl ether, or epichlorohydrin below the freezing point of the reaction mixture. Cryogelation is an ecological, friendly, and versatile method of preparing biomaterials with improved physicochemical properties. Using this technique, XG-based cryogels were successfully prepared in the form of microspheres, monoliths, and films. The XG-based cryogels were characterized by FTIR, SEM, AFM, swelling kinetics, and compressive tests. A heterogeneous morphology with interconnected pores, with an average pore size depending on both the nature of the cross-linker and the cross-linking ratio, was found. The use of a larger amount of cross-linker led to both a much more compact structure of the pore walls and to a significant decrease in the average pore size. The uniaxial compression tests indicated that the XG-based cryogels cross-linked with 1,4-butanediol diglycidyl ether exhibited the best elasticity, sustaining maximum deformations of 97.67%, 90.10%, and 81.80%, respectively.

A review on remediation of dye adulterated system by ecologically innocuous "biopolymers/natural gums-based composites"

The mitigation of wastewater exploiting biopolymers/natural gums-based composites is an appealing research theme in today's scenario. The following review presents a comprehensive description of the polysaccharides derived from biopolymers (chitosan, collagen, cellulose, starch, pectin, lignin, and alginate) and natural gums (guar, gellan, carrageenan, karaya, moringa oliefera, tragacanth, and xanthan gum). These biopolymers/natural gums-based composites depicted excellent surface functionality, non-toxicity, economic and environmental viability, which corroborated them as potential candidates in the decontamination process. The presence of -OH, -COOH, and -NH functional groups in their backbone rendered them tailorable for modification/functionalization, and anchor an array of pollutants via electrostatic interaction, hydrogen bonding, and Van der Waals forces. Further, due to these functional moieties, these bio-based composites revealed an excellent adsorption capacity than conventional adsorbents. This review provides an overview of the classification of biopolymers/natural gums based on their origin, different ways of their modification, and the remediation of dye-contaminated aqueous environments employing diverse bio-based adsorbents. The isotherm, kinetic modelling along with thermodynamics of the adsorption process is discussed. Additionally, the reusable efficacy of these bio-adsorbents is reviewed.

Adsorption of Pb (II) and Cu (II) by magnetic beads loaded with xanthan gum

Green and environmentally friendly and efficient separation adsorbents have attracted much attention in the treatment of heavy metal ions wastewater. In this study, xanthan gum (XG) was supported by fly ash magnetic beads (FAMB) to prepare adsorbent XG@FAMB. The effects of XG@FAMB dosage, pH value of the solution, adsorption time, and initial Pb (II) and Cu (II) concentration on its adsorption performance for Pb (II) and Cu (II) were investigated. The results show that under the conditions of pH 6, dosage of XG@FAMB 4.0 g/L, adsorption time 120 min, and initial concentration 60 mg/L, the maximum adsorption capacity of XG@FAMB for Pb (II) and Cu (II) was 14.93 mg/g and 14.88 mg/g, respectively. The adsorption process of Pb (II) and Cu (II) by XG@FAMB could be better described by the quasi-second-order kinetic model and Langmuir isothermal adsorption model, that is, the adsorption process is monolayer adsorption controlled by chemical action. The adsorption mechanism is that Pb (II) and Cu (II) coordinate with oxygen-containing functional groups hydroxyl and carboxyl on XG@FAMB surface, accompanied by electrostatic adsorption. XG@FAMB has the advantages of environmental protection of XG and easy solid-liquid separation of FAMB, and has a good removal effect on Pb (II) and Cu (II).

Green and Superior Adsorbents Derived from Natural Plant Gums for Removal of Contaminants: A Review

The ubiquitous presence of contaminants in water poses a major threat to the safety of ecosystems and human health, and so more materials or technologies are urgently needed to eliminate pollutants. Polymer materials have shown significant advantages over most other adsorption materials in the decontamination of wastewater by virtue of their relatively high adsorption capacity and fast adsorption rate. In recent years, "green development" has become the focus of global attention, and the environmental friendliness of materials themselves has been concerned. Therefore, natural polymers-derived materials are favored in the purification of wastewater due to their unique advantages of being renewable, low cost and environmentally friendly. Among them, natural plant gums show great potential in the synthesis of environmentally friendly polymer adsorption materials due to their rich sources, diverse structures and properties, as well as their renewable, non-toxic and biocompatible advantages. Natural plant gums can be easily modified by facile derivatization or a graft polymerization reaction to enhance the inherent properties or introduce new functions, thus obtaining new adsorption materials for the efficient purification of wastewater. This paper summarized the research progress on the fabrication of various gums-based adsorbents and their application in the decontamination of different types of pollutants. The general synthesis mechanism of gums-based adsorbents, and the adsorption mechanism of the adsorbent for different types of pollutants were also discussed. This paper was aimed at providing a reference for the design and development of more cost-effective and environmentally friendly water purification materials.

Effective adsorption of crystal violet onto aromatic polyimides: Kinetics and isotherm studies

The motive of this work is to synthesis aromatic polyimides by a two-step poly condensation process and the prepared aromatic polyamides (APIs) is been used as an effective functionalized adsorbent for the removal of carcinogenic crystal violet (CV) from aqueous medium. The adsorption efficiency of the APIs was enhanced by incorporation different functional moieties (varying aromatic dianhydrides with -O-, -(CF₃)₂-, -(CH₃)₂-) in the polymer structure. The initial and final concentration of CV was measured using UV-Vis spectrometer. The adsorption process was optimized by varying the parameters such as the effect of solution pH, contact time, initial dye concentration, and adsorbent dosage. Kinetics and isotherms of the adsorption system were appraised using data obtained from effect of contact time and initial dye concentration with corresponding empirical modelling techniques respectively. The evaluated results of the adsorption kinetic studies confirmed that the adsorption of API onto CV is followed a pseudo-second-order kinetic model. The adsorption behaviour and their interactions between APIs and CV are well established. The experimental results of this research output could be confirmed that APIs is a very effective adsorbent for the removal of cationic dye from aqueous.

The Antibacterial Action of Safranin and Gentian Violet

BACKGROUND

The increasing resistance of many bacterial pathogens against antibiotic measures urgently requires new or repurposing therapeutic strategies. Gentian violet is a triarylmethane dye used as a histological stain and for Gram's method of classifying bacteria. It also exerts an antimicrobial effect against certain pathogens, especially dermatological infections. Safranin is the most popular counterstain used in medical laboratories due to its low cost and safe laboratory usage. However, few studies have been conducted on the antimicrobial activity of safranin.

OBJECTIVE

With the growing prevalence of multidrug-resistant bacteria, this study aimed to evaluate the antibacterial efficacy of gentian violet and safranin against multidrug-resistant Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa).

METHODS

All tested bacteria were multidrug-resistant (MDR) bacteria isolated from skin infections (abscesses and wounds). Using gentian violet and safranin, antibacterial effects were studied using the well-diffusion method against 20 samples of clinically isolated bacteria, 10 diagnosed as S. aureus, and 10 as P. aeruginosa. Bacteria were diagnosed using the VITEK 2 automated system (bioMérieux, Marcy-l'Étoile, France). Iodine served as the control agent, since both Gram-positive and Gram-negative bacteria are sensitive to it.

RESULTS

Gentian violet dye has been shown to be 100% sensitive to both Gram-positive and Gram-negative bacterial isolates. Although safranin also had high sensitivity (100%) to S. aureus isolates, its sensitivity to P. aeruginosa was only 20%. Staphylococcus aureus was more resistant to iodine (40% sensitivity) compared to P. aeruginosa, which was 100% sensitive to iodine.

CONCLUSIONS

Gentian violet and safranin are low-cost and better tolerated topical agents that have potential for use in dermatological applications. Gentian violet had good antibacterial activity against both Gram-positive and Gram-negative bacteria, making it useful for treating bacterial skin pathogens such as S. aureus and P. aeruginosa especially for MDR bacteria. While safranin has good efficacy against Gram-positive bacteria (S. aureus), its effect against Gram-negative bacteria (e.g. P. aeruginosa) is poor.

Use of xanthan gum for whole cell immobilization and its impact in bioremediation - a review

Xanthan gum is one of the exo-polysaccharides produced by bacteria and is characterized by unique non-Newtonian properties. Its structure and conformation strongly depend on the fermentation conditions and such factors as temperature and ions concentration. The properties of the xanthan gum were appreciated in the controlled drug delivery but in the crosslinked form. Due to its ability to enhance the survival rate of immobilized bacteria, the potential of a crosslinked form is promising. Unfortunately, xanthan gum crosslinking procedures often require toxic substances or harsh environmental conditions, which cannot be used in the entrapment of living cells. In this study, we summarised a crosslinking method that could potentially be modified to reduce its toxicity to living cells. Moreover, this review also includes using xanthan gum in bioremediation studies and possible utilization methods to avoid carrier accumulation in the environment.

Sequestration of crystal violet dye from wastewater using low-cost coconut husk as a potential adsorbent

The current study explores the effectiveness of coconut husk for crystal violet dye sequestration employing a batch experimental setup. Characterization of adsorbent was carried out via FTIR, and SEM techniques and results confirmed the involvement of -OMe, -COC- and hydroxyl functional groups in dye uptake, and the rough, porous nature of adsorbent and after adsorption dye molecules colonized these holes resulting in dye exclusion. Effects of various adsorption parameters such as pH, adsorbent dose, contact time, initial dye concentration, and temperature of solution were studied. Crystal violet adsorption on coconut husk was highly pH-dependent, with maximum removal occurring at basic pH. Maximum removal of dye, i.e., 81%, takes place at optimized conditions. Kinetic data was analyzed by pseudo-first, pseudo-second order and an intra-particle diffusion model. Results showed that the pseudo-second order kinetic model best described adsorption of crystal violet onto coconut husk. Langmuir, Freundlich, and D-R adsorption isotherms were also used to test their appropriateness to experimental data and the Freundlich isotherm fits best to data. Thermodynamic parameters showed that the current process was spontaneous, endothermic in nature with continuous decrease in entropy. Established practice is 79% applicable to tap water and in acidic medium nearly 80% of adsorbent was recovered, confirming the effectiveness and appropriateness of coconut husk for crystal violet dye exclusion from wastewater.

Removal of crystal violet from water by poly acrylonitrile-co-sodium methallyl sulfonate (AN69) and poly acrylic acid (PAA) synthetic membranes

The current investigation is focused on the removal of crystal violet (CV) from water by adsorption process (bach method). To achieve this purpose, specific membranes were prepared from poly acrylonitrile-co-sodium methallyl sulfonate (AN69) and poly acrylic acid (PAA) blends. The adsorption of CV onto AN69/PAA membranes was studied under various conditions: membrane composition, pH, contact time, initial concentration and temperature. To understand the effect of membrane morphology on adsorption process, scanning electronic microscopy (SEM) was employed to determine the features of section and membrane’s surface. From isotherm results, it was found that: the maximum adsorption capacity Q m was 1250 mg g−1, the Langmuir separation factor R L was lying between 0.33 and 0.76, the Freundlich intensity was higher than Unit (n = 1.25) and the adsorption process follows preferentially the Langmuir model (correlation constant R 2 = 0.99). The mechanism of adsorption is perfectly fitted by pseudo second order. The obtained results tend to confirm that the removal of dye molecules is due to the establishment of strong electrostatic interactions between cationic dye molecules and anionic membrane groups. The high adsorption capacity (1250 mg g−1) for the small dye molecules may open wide opportunities to apply these membranes in the removal of various hazardous pollutants commonly present in water.

Green antimicrobial adsorbent containing grafted xanthan gum/SiO2 nanocomposites for malachite green dye

Recently, removal of synthetic dyes, especially cationic dye of malachite green (MG), and inhibition of the growth of pathogenic microorganism from drinking water have gained much interest due to their high toxic potency for aquatic biosystems. Herein, a new dye adsorbent with outstanding antibacterial activity was fabricated based on xanthan gum (XG) and SiO₂ nanoparticles through ultrasonication followed by the crosslinking polymerization with vinyl imidazole monomer. The nano adsorbents were characterized with various techniques such as FTIR, XRD, SEM, EDX, and TEM. The nanocomposites were applied as a filter for discarding MG dye and killing the growth of bacterial strains such as E.coli and S.aureus which are considered as the common impurities for drinking water. The data revealed that a maximum adsorption capacity was recorded as 99.5% (Q_max = 588.2 mg/g) at optimum conditions including 10 mg nanocomposite, 10 mL of MG dye (450 ppm), pH = 7, the temperature of 30 °C, and the adsorption time was adjusted within 6 h. The process of dye adsorption was applied to the common isotherm models of Langmuir, Temkin, and Freundlich, and the findings showed that the adsorption behavior was well fitted with the Langmuir one (R² = 0.9983). Moreover, different adsorption kinetic models such as pseudo-first order, pseudo-second order, and intra-particle diffusion were studied for understanding the mechanism of MG adsorption onto nanocomposite surface. It was found that both intraparticle diffusion and pseudo-first-order have participated evenly in the adsorption mechanism of MG dye. Ultimately, the as-prepared nanocomposites were tested against the growth of S. aureus, and E.coli manifesting a superior inhibition diameter as 23.5 ± 0.50, and 25.33 ± 0.47 mm against E.coli, and S. aureus, respectively. Therefore, our new XG-g-PVI/SiO₂ adsorbent is a very promising adsorbent for the fast and efficient capture of dyes from aqueous solutions.

Zwitterionic polymer modified xanthan gum with collagen II-binding capability for lubrication improvement and ROS scavenging

High friction of damaged cartilage requires long-acting lubricated additive, which can also effectively scavenge reactive oxidative species (ROS) produced by mechanically stimulated chondrocytes. In this study, xanthan gum (XG) was grafted by poly (sulfobetaine methacrylate) (PSBMA) (the [XG]/[SBMA] molar ratio is 1:5 or 1:10), forming nanoparticles and then conjugated with collagen II-binding peptide, finally obtaining CBPXGSB1/5 or CBPXGSB1/10. Therein, the CBPXGSB1/5 was chosen as optimal lubricated additive. The results show that hydrated effect of PSBMA side chains endows CBPXGSB1/5 with favorable lubrication property (COF is 0.063). Furthermore, the CBPXGSB1/5 combining lubrication property and specific binding capability together may achieve the long-acting lubrication for injured cartilage in medical field. The CBPXGSB1/5 also possesses antioxidation verified by DPPH assay and exhibits synergistically enhanced ROS (OH, O₂^- and H₂O₂) scavenging. Besides, cytotoxicity experiment demonstrates that CBPXGSB1/5 has good biocompatibility. Therefore, multifunctional CBPXGSB1/5 developed here may have promising application potential in osteoarthritis treatment.

Development of a Novel Adsorbent Prepared from Dredging Sediment for Effective Removal of Dye in Aqueous Solutions

This study proposed a novel and low-cost adsorbent prepared from dredging sediment (DSD) for effective removal of dye in aqueous solutions. The adsorption efficiency and behavior of the DSD adsorbent toward the crystal violet (CV), a cationic dye, were investigated via batch experiments. The results showed that DSD samples contain mainly clay minerals (illite and kaolinite) and other mineral phases. In addition, DSD is a mesoporous material (Vmesopore = 94.4%), and it exhibits a relatively high surface area (~39.1 m2/g). Adsorption experiments showed that the solution’s pH slightly affects the adsorption process, and a pH of 11 gave a maximum capacity of 27.2 mg/g. The kinetic data of CV dye adsorption is well described by the pseudo–second-order and the Avrami models. The Langmuir and Liu isotherm models provide the best fit for the adsorption equilibrium data. The monolayer adsorption capacity of Langmuir reached 183.6, 198.0, and 243.6 mg/g at 293, 308, and 323 K, respectively. It was also found that the adsorption process was spontaneous (−ΔG°), exothermic (−∆H°), and increased the randomness (+∆S°) during the adsorption operation. The primary mechanisms in CV dye adsorption were ion exchange and pore filling, whereas electrostatic attraction was a minor contribution. In addition, three steps involving intraparticle diffusion occur at the same time to control the adsorption process. The results of this study highlight the excellent efficiency of DSD material as an ecofriendly sorbent for toxic dyes from water media.

Bathurst Burr (Xanthium spinosum) Powder-A New Natural Effective Adsorbent for Crystal Violet Dye Removal from Synthetic Wastewaters

A new natural adsorbent material, Bathurst burr powder, was used to remove crystal violet dye from synthetic wastewaters. Particle size distribution and SEM and FTIR analyses were performed to characterize it. The effect of the operational adsorption process parameters (pH, ionic strength, initial dye concentration, adsorbent dose, contact time, temperature) onto the adsorption process was evaluated in a batch system. Equilibrium, kinetic, and thermodynamic studies were performed in order to understand the adsorption process. Taguchi method and ANOVA test were used to optimize the dye adsorption conditions and to establish the percentage contribution of each factor, respectively. The accuracy of the Taguchi prediction method was analyzed by correlating the predicted dye removal efficiency with the experimentally determined one. The particle size distribution analysis showed that 82.15% of the adsorbent particles have an average size below 0.5 mm. The adsorption process followed the Langmuir isotherm and pseudo-second order kinetic model. Maximum adsorption capacity value (164.10 mg·g⁻¹) was higher compared to many similar adsorbents. The process was endothermic, spontaneous, and favorably involving a physisorption mechanism. The Taguchi method showed that the most influential controllable factor was pH (65% contribution in adsorption efficiency) and the data analysis indicates a very good accuracy of the experimental design (R² = 0.994). The obtained results demonstrated that Bathurst burr powder can be used as a cheap and efficient adsorbent for crystal violet dye removal from aqueous solution.

Adsorption Behavior of Crystal Violet and Congo Red Dyes on Heat-Treated Brazilian Palygorskite: Kinetic, Isothermal and Thermodynamic Studies

The effect of heat treatment on the adsorptive capacity of a Brazilian palygorskite to remove the dyes crystal violet (CV) and congo red (CR) was investigated. The natural palygorskite was calcined at different temperatures (300, 500 and 700 °C) for 4 h. Changes in the palygorskite structure were evaluated using X-ray diffraction, X-ray fluorescence, thermogravimetric and differential thermal analysis, N₂ adsorption/desorption and Fourier transform infrared spectroscopy. The adsorption efficiency of CV and CR was investigated through the effect of initial concentration, contact time, temperature, pH and dosage of adsorbent. The calcination increased the adsorption capacity of palygorskite, and the greatest adsorption capacity of CV and CR dyes occurred in the sample calcined at 700 °C (Pal-700T). The natural and calcined samples at 300 and 500 °C followed the Freundlich isothermal model, while the Pal-700T followed the Langmuir isothermal model. Adsorption kinetics results were well described by the Elovich model. Pal-700T showed better adsorption performance at basic pH, with removal greater than 98%, for both dyes. Pal-700T proved to be a great candidate for removing cationic and anionic dyes present in water.

A review of the enzymatic, physical, and chemical modification techniques of xanthan gum

Xanthan gum (XG), a bacterial polysaccharide has numerous valuable characteristics in the food, biomedical, pharmaceuticals, and agriculture sector. However, XG has also its particular limitations such as its vulnerability to microbial contamination, inadequate mechanical and thermal stability, unusable viscosity, and poor water solubility. Therefore, XG's structure and conformation need to be modified enzymatically, chemically, or physically to improve its optimistic features and decrease the formation of crystals, increase antioxidant ability, and radical scavenging activity. We have found out different means to modify XG and elaborate the importance and significance of the modified structure of XG. In this review, different enzymes are reviewed for XG degradation, which modifies their structure from different points (main chain or side chain). This article also reviews various physical methods (ultrasound, shear, pressure, sonication, annealing, and heat treatments) based on prevailing publications to alter XG conformation and produce low molecular weight (LMW) and less viscous end-product. Moreover, some chemical means are also discussed that result in modified XG through crosslinking, grafting, acetylation, pyruvation, as well as by applying different chemical agents. Overall, the current progress on XG degradation is very auspicious to develop a new molecule with considerable uses, in various industries with future assessments.

Adsorption Behavior of Acid-Treated Brazilian Palygorskite for Cationic and Anionic Dyes Removal from the Water

The effect of acid treatment on the adsorptive capacity of a Brazilian palygorskite to remove the crystal violet (CV) and congo red (CR) dyes was investigated. The raw palygorskite was acid-treated by different HCl solutions (2, 4, and 6 mol/L). The modifications on the palygorskite structure were investigated using X-ray diffraction, X-ray fluorescence, Fourier-transform infrared spectroscopy, N2 adsorption/desorption, and thermogravimetric and differential thermal analysis. The efficiency of CV and CR adsorption was investigated, and the effect of the initial concentration, contact time, pH, and adsorbent amount was analyzed. The results revealed that CV adsorption in the acid-treated palygorskite was higher than that of the raw material. A Langmuir isotherm model was observed for the adsorption behavior of CV, while a Freundlich isotherm model was verified for the CR adsorption. A pseudo-second-order model was observed for the adsorption kinetics of both dyes. The higher CV adsorption capacity was observed at basic pH, higher than 97%, and the higher CR removal was observed at acidic pH, higher than 50%. The adsorption parameters of enthalpy (ΔH), entropy (ΔS), and Gibbs energy (ΔG) were evaluated. The adsorption process of the CV and CR dyes on the raw and acid-treated Brazilian palygorskite was predominantly endothermic and occurred spontaneously. The studied raw palygorskite has a mild-adsorption capacity to remove anionic dyes, while acid-treated samples effectively remove cationic dyes.

Hexametaphosphate cross-linked chitosan beads for the eco-efficient removal of organic dyes: Tackling water quality

There is an increasing trend of developing various low-cost grafted natural amino polysaccharides for the biosorptive removal of noxious dye effluents like Malachite green (MG) and anionic Reactive Red-195 (RR-195) dyes from aqueous solution. Chemically cross-linked chitosan microsphere (CTS-HMP), a promising non-toxic biosorbent possessing high charge density and thermal stability was prepared by using hexametaphosphate as ionic cross-linker. Batch biosorption experiments were carried out under different temperatures (298, 308 and 318 K), pH (2.0-10.0), initial concentrations (25-250 mg L^-1), adsorbent dosage (0.01-0.1 g) and contact times (0-180 min) to understand the optimum experimental conditions and simultaneously evaluate the adsorption isotherms and kinetics of CTS-HMP. Biosorption equilibrium was established in 120 and 60 min for MG and RR-195 removal process. The pseudo-equilibrium process was best described by the pseudo-second-order kinetic (R² ≥ 0.98), Freundlich and Temkin isotherm model (R² ≥ 0.90). The removal rate of MG and RR-195 gradually increased (69.40 and 148 mg g^-1) at 250 mg L^-1 of initial concentration till 100 and 50 min of contact period in a single contaminant system, though the removal efficiency of acid dye was ~2 times higher compared to basic dye under optimum conditions (p < 0.05; t-test). Thermodynamic parameters indicated exothermic (MG) and endothermic (RR-195) nature of spontaneous dye removal. The activation energy of sorption (E_a) was <50 kJ mol^-1 which highlighted the importance of physical adsorption process. Therefore, the obtained results clearly validate the sustainable utilization of CTS-HMP as a promising functionalized chitosan microparticles/agent for removing dye effluents from the contaminated aqueous phase.

Magnetite doped metal–organic framework nanocomposites: an efficient adsorbent for removal of bisphenol-A pollutant

The removal of bisphenol-A (BPA) from the aqueous environment is a vital issue for public health due to its toxic effect.