Layer by layer application of chitosan and carboxymethyl cellulose coatings delays ripening of mango fruit by suppressing cell wall polysaccharides disassembly

Konjac glucomannan/ carboxylated cellulose nanofiber-based edible coating with tannic acid maintains quality and prolongs shelf-life of mango fruit

Polysaccharide films containing antimicrobial agents have good prospects for application in the fruit industry. However, poor film-forming properties of polysaccharides remain a major challenge. In this work, the konjac glucomannan (KGM) was modified by cross-linking with carboxylated cellulose nanofibers (CNF) to form a composite coating film, and tannic acid (TA) was provided as an active ingredient to improve the antibacterial effect. The optimal formula was: CNF/KGM (w:w) 3.05:10, TA content was 0.40 %, and glycerol content was 0.57 %. KGM/CNF/TA film had good compatibility and a compact structure. The thermal stability and water contact angle of the composite film were higher than those of KGM. Furthermore, the KGM/CNF/TA film reduced the black spot incidence, maintained fruit firmness, decreased ethylene release and respiration rate, increased the antioxidant enzyme activities, and extended the shelf-life of mango. Thus, KGM/CNF/TA is expected to expand polysaccharide/ polymer composite application in the fruit industry.

Postharvest melatonin application attenuates browning, delays softening, and maintains the antioxidant potential of jackfruit bulbs

Although the impact of postharvest melatonin (MLT) application in extending the storage life of horticultural produce has been widely studied, its effect in jackfruit remains unknown. This investigation evaluates the influence of MLT dip application (0, 0.05, 0.1, and 0.2 mM) on browning, softening and oxidative stress in cold-stored jackfruit bulbs over a period of 20d. All MLT treatments reduced browning index and oxidative stress, while activities of browning-related enzymes were comparatively lower in the 0.1 mM MLT treatment. Treatment with 0.2 mM MLT maintained elevated levels of antioxidants as compared to control. Higher bulb firmness, total pectin and cellulose content with considerably lower activities of cell wall degrading enzymes were observed in all MLT treatments. In conclusion, MLT (0.1 and 0.2 mM) is an effective treatment for mitigating postharvest browning and oxidative stress in addition to delaying fruit softening and maintaining the antioxidant potential of cold-stored jackfruit bulbs.

Global insights and advances in edible coatings or films toward quality maintenance and reduced postharvest losses of fruit and vegetables: An updated review

Transitioning to safe, nonthermal, and edible strategies for maintaining fruit and vegetable (F&V) quality, reducing postharvest losses (up to 55% annually), and ensuring food security requires extensive research and innovation in postharvest technologies. This review aims to provide an updated understanding of edible coatings or films (ECF), focusing on their role in reducing F&V postharvest losses, based on data from the last 40 years retrieved from the Web of Science database. The global ECF research network is represented by publication trends, majorly researched F&V, key research areas, influential and emerging authors, and global research ranking. The role of ECF in preserving F&V quality has been assessed by examining critical quality parameters, including weight loss, total soluble solids, titratable acidity, ripening, softening, sensory and organoleptic characteristics, browning, chilling injury, and microbial safety. Furthermore, recent advancements in ECF formulations, including nanoscale ingredients and application methodologies, have been critically discussed. Sources, categorization, application strategies, mode of action, functional properties, sustainable development goals (SDGs), challenges, safety, legislations, and future perspectives in ECF research have also been discussed. The key findings indicate that China (20.34%) and the USA (9.94%) are the leading countries in ECF research. Studies have demonstrated ECF's potential in reducing F&V postharvest losses by maintaining quality parameters through advanced nanoscale compositions and methodologies. Notably, ECF research supports multiple SDG targets, including SDGs 2, 3, 8, 9, 12, 13, and 15. Future ECF research should explore 3D-printed coatings, nonflavor-altering components, and potential crosslinking agents to enhance F&V quality and reduce postharvest losses.

Chitosan nanoparticles and neem essential oil functionalized pullulan/gum arabic active edible biocomposites for fresh-cut guava preservation

The study demonstrates the preparation of active edible biocomposites using Pullulan (PUL) and Gum Arabic (GA), functionalized with Chitosan Nanoparticles (NCS) and Neem Essential Oil (NEO). These biocomposites addressed the issues of high hydrophilicity and poor barrier properties in packaging. The effects of varying NCS concentrations (1 %, 2 %, and 3 %) on various film properties were studied, while keeping PUL, GA, and NEO concentrations constant. The biocomposite containing NEO and 3 % NCS (PUL/GA/NCS3/NEO), significantly improved surface properties, transforming it from hydrophilic (water contact angle 55.49 ± 2.31°) to hydrophobic (115.01 ± 1.86°). Additionally, tensile strength increased by ∼12.77 MPa, elongation at break by ∼6.26 %, thermal stability (Toffset) by ∼22.49 °C, and water vapour barrier by ∼45.95 %, alongside enhanced UV-shielding, antimicrobial and antioxidant properties. The EDX analysis confirmed the biocomposite safety, with 55.7 % carbon (C), 3.6 % nitrogen (N), and 40.8 % oxygen (O). Moreover, in vitro biocompatibility tests on Human Embryonic Kidney (HEK-293) cells indicated non-cytotoxicity, with 86.82 ± 2.28 % viability after 72 h. Furthermore, the practical application of PUL/GA/NCS3/NEO solution was tested as an edible coating material for fresh-cut guava preservation. The coated guava better maintained storage quality parameters in terms of colour, weight loss, firmness, microbiological shelf-life and antioxidant activity, under both ambient and refrigerated conditions.

Improvement of Storage Quality of Broccoli Using a Cold-Shock Precooling Way and the Related Molecular Mechanisms

This research was performed to ascertain the impact of cold shock precooling and the underlying mechanism on broccoli storage quality. After being harvested and placed at 0 ± 2 °C, the broccoli was sealed in polyethylene bags and stored at 4 ± 2 °C. Cold-shock precooling showed superior qualities in terms of higher hardness, titratable acidity, moisture content, soluble protein, and chlorophyll, as well as more abundant volatile compounds, better sensory quality, antioxidant capacity, and decreased weight loss in comparison to without cold shock. The regulation of important metabolic enzymes such as peroxidase, catalase, pheophytinase, and magnesium-dechelatase was credited with these beneficial effects. It was found that a 90 min duration of cold shock was the ideal treatment. Results showed that cold shock precooling was a useful, economical, and environmentally responsible way to reduce postharvest loss and postpone broccoli senescence during storage.

Formulations based on pullulan and a derivative as coating material for the food sector

Carboxymethylated derivatives of pullulan (PU) were synthesized and evaluated as coating for the postharvest preservation of blueberries. Carboxymethylpullulan was obtained by etherification reaction with the substitution degrees of 0.52, 0.34, and 0.26 for CMP1, CMP2, and CMP3 respectively. Infrared spectroscopy and nuclear magnetic resonance results showed characteristic signals of the carbonyl group belonging to the carboxymethyl group. Thermal analysis showed that CMP1, CMP2, and CMP3 derivatives presented thermal stability values of 209.91 C, 214.73 C, and 225.52 °C, respectively, and were lower with respect to PU with Td of 238.84 °C. Furthermore, an increase in the glass transition temperature due to carboxymethylation was determined. The chemical modification decreased the contact angle with respect to PU (71.34°) with values for CMP1, CMP2, and CMP3 of 39.89°, 53.72° and 60.61°, respectively. The carboxymethylation also increased the water vapor permeability and mechanical properties of the films. In addition, it was found that the CMP molecules affected the optical properties. The application of CMP-based coatings reduced the mass loss and ripening rate of blueberries compared to native pullulan, therefore, packaging from CMP molecules could be used as a coating capable of delaying ripening and extending the shelf life of fruits.

Application of hydroxypropyl methylcellulose to improve the wettability of chitosan coating and its preservation performance on tangerine fruits

Hydroxypropyl methylcellulose (HPMC) was employed as an intermediate layer to enhance interfacial interaction between chitosan (CS) coating and tangerine fruits, thereby improving the preservation effect. Owing to the low surface tension of tangerine fruit (26.04 mN/m), CS coating solutions showed poor wetting properties on fruit peels (contact angle > 100°). However, by applying a 1.0 % (w/v) HPMC coating on fruits, the contact angle of CS solutions with concentrations of 0.5 %, 1.0 %, and 1.5 % (w/v) decreased to 47.0°, 47.4°, and 48.5°, respectively, whereas the spreading coefficient increased to -16.0 mN/m, -17.6 mN/m and -19.8 mN/m, respectively. Subsequently, the effects of the coatings on fruit quality were investigated. The results demonstrated the promising performance of HPMC-CS two-layer coating in inhibiting fruit respiration, reducing decay rate, and maintaining nutrient content. Notably, HPMC-1.5%CS coating not only reduced the decay rate of tangerine fruit by 45 % and 31 %, in comparison to the uncoated group (CK) and pure CS coating respectively, but also maintained a high content of ascorbic acid. Therefore, this study confirmed that the use of amphiphilic polymers for improving the surface properties of fruits can effectively facilitate the wetting of hydrophilic coatings on fruits, and significantly improve the fresh-keeping performance of edible coatings.

Revolutionizing tropical fruits preservation: Emerging edible coating technologies

Tropical fruits, predominantly cultivated in Southeast Asia, are esteemed for their nutritional richness, distinctive taste, aroma, and visual appeal when consumed fresh. However, postharvest challenges have led to substantial global wastage, nearly 50 %. The advent of edible biopolymeric nanoparticles presents a novel solution to preserve the fruits' overall freshness. These nanoparticles, being edible, readily available, biodegradable, antimicrobial, antioxidant, Generally Recognized As Safe (GRAS), and non-toxic, are commonly prepared via ionic gelation owing to the method's physical crosslinking, simplicity, and affordability. The resulting biopolymeric nanoparticles, with or without additives, can be employed in basic formulations or as composite blends with other materials. This study aims to review the capabilities of biopolymeric nanoparticles in enhancing the physical and sensory aspects of tropical fruits, inhibiting microbial growth, and prolonging shelf life. Material selection for formulation is crucial, considering coating materials, the fruit's epidermal properties, internal and external factors. A variety of application techniques are covered such as spraying, and layer-by-layer among others, including their advantages, and disadvantages. Finally, the study addresses safety measures, legislation, current challenges, and industrial perspectives concerning fruit edible coating films.