Recent insights into microalgae-assisted microbial fuel cells for generating sustainable bioelectricity

Recent Applications, Challenges, and Future Prospects of Microbial Fuel Cells: A Review

Microbial fuel cell (MFC), a clean and promising technology that has the potential to tackle both environmental degradation and the global energy crisis, receives tremendous attention from researchers over recent years. The performance of each system component, including the membrane and electrode utilized in MFCs, has a great effect on the efficiency of converting chemical energy found in organic waste to power generation through bacterial metabolism. The MFCs have diverse applications that are growing day by day in developed countries. This review discusses recently available various potential applications including wastewater treatment, biohydrogen production, hazardous waste removal, generation of bioelectricity, robotics, biosensors, etc. There are still several challenges (e.g., system complexity, economic, commercialization, and other operational factors) for large-scale practical applications, particularly for relatively low power output and delayed start-up time, which is also reported in this review article. Moreover, the operational factors (e.g., electrode materials, proton exchange system, substrate, electron transfer mechanism, pH, temperature, external resistance, and shear stress and feed rate) that affect the performance of MFCs, are discussed in detail. To resolve these issues, optimizations of various parameters are also presented. In the previously published studies, this paper indicates that MFCs have demonstrated power densities ranging from 2.44 to 3.31 W m- 2, with Coulombic efficiencies reaching up to 55.6% under optimized conditions. It is also reported that MFCs have achieved the removal efficiency of chemical oxygen demand (COD), total organic carbon (TOC), and antibiotics up to 93.7%, 70%, and 98%, respectively. Finally, this paper highlights the future perspective of MFCs for full-scale applications.

Unleashing the power of microalgae: a pioneering path to sustainability and achieving the sustainable development goals

This study explores the remarkable potential of algae in addressing global sustainability challenges. Microalgae, in particular, emerge as sustainability champions. Their applications span an impressive array of industries and processes, including food and feed production, biofuels, cosmetics, pharmaceuticals, and environmental remediation. This versatility positions algae as key players in achieving over 50% of UN Sustainable Development Goals (SDGs) simultaneously, addressing issues such as climate action, clean water and sanitation, affordable and clean energy, and zero hunger. From sequestering carbon, purifying wastewater, and producing clean energy to combating malnutrition, algae demonstrates unparalleled potential. Their ability to flourish in extreme conditions and their rapid growth rates further enhance their appeal for large-scale cultivation. As research advances, innovative applications continue to emerge, such as algae-based bioplastics and dye-sensitized solar cells, promising novel solutions to pressing global issues. This study illuminates how harnessing the power of algae can drive us towards a more resilient, sustainable world. By leveraging algae's multifaceted capabilities, we can tackle climate change, resource scarcity, and economic development concurrently. The research highlights the critical role of algae in promoting circular economy principles and achieving a harmonious balance between human needs and environmental preservation, paving the way for a greener, more sustainable future.

Performance, mechanism regulation and resource recycling of bacteria-algae symbiosis system for wastewater treatment: A review

The bacteria-algae synergistic wastewater treatment process not only efficiently eliminates nutrients and absorbs heavy metals, but also utilizes photosynthesis to convert light energy into chemical energy, generating valuable bioresource. The study systematically explores the formation, algal species, and regulatory strategies of the bacterial-algal symbiosis system. It provides a detailed analysis of various interaction mechanisms, with a particular focus on nutrient exchange, signal transduction, and gene transfer. Additionally, the efficacy of the system in removing nitrogen, phosphorus, and heavy metals, as well as its role in CO2 reduction and bioresource recycling, is thoroughly elaborated. Potential future research of bacteria-algae cell factory producing bioenergy production, feed or fertilizers are summarized. This paper clearly presents effective strategies for efficiently removing pollutants, reducing carbon emissions, and promoting resource recycling in the field of wastewater treatment. It also provides recommendations for further research on utilizing microbial-algal symbiotic systems to remove novel pollutants from wastewater and extract value-added products from the resulting biomass.

Effects of dietary supplementation with benthic diatom Amphora coffeaeformis on blood biochemistry, steroid hormone levels and seed production efficiency of Nile tilapia Oreochromis niloticus broodstock

Aquafeed additive quality and quantity remain pivotal factors that constrain the sustainability and progress of aquaculture feed development. This study investigates the impact of incorporating the benthic diatom Amphora coffeaeformis into the diet of Nile tilapia (Oreochromis niloticus) broodstock, on the blood biochemistry, steroid hormone (SH) levels and seed production efficiency. Broodstock females displaying mature ovary indications were initially combined with males at a ratio of three females to one male. A total of 384 adult Nile tilapia (288 females and 96 males) were used, with 32 fish (24 females and eight males) assigned to each of 12 concrete tanks (8 m³; 2 m × 4 m × 1 m), with three replicate tanks for each dietary treatment, throughout a 14-day spawning cycle until egg harvest. Fish were fed one of four different dietary treatments: AM0% (control diet), and AM2%, AM4% and AM6% enriched with the diatom A. coffeaeformis at levels of 20, 40 and 60 g/kg of diet respectively. At the trial's conclusion, total protein, albumin, triglyceride and creatinine), SHs (follicle-stimulating hormone, luteinizing hormone, free testosterone, total testosterone, progesterone and prolactin) and seeds production efficiency of Nile tilapia improved significantly (p < 0.05) in alignment with the increment of A. coffeaeformis supplementation. The findings propose that including A. coffeaeformis at levels ranging from 4% to 6% could be effectively employed as a feed additive during the Nile tilapia broodstock's spawning season.

Bioelectrochemical technologies for soil and sediment remediation: Recent advances and future perspectives

Soil and sediment serve as the ultimate repositories of pollutants, presenting a significant environmental concern on a global scale. However, there is no effective measure due to the low mobility, high resistance and high cost of contaminated soil or sediment. The bioelectrochemical systems (BESs) combine microbial and electrochemical technology to achieve efficient and rapid degradation of pollutants by enriching electroactive microbial membranes with electrodes. Specifically, BESs offer an ideal solution for in-situ remediation, eliminating the secondary pollution and high energy consumption issues associated with traditional technologies. However, in soil or sediment bioelectrochemical systems (SBESs), further summarization and improvement are required to address the influencing factors during the process of pollutant remediation, given the fragility of complex geographical and natural environments. This paper provides a comprehensive overview and analysis of the removal mechanisms of organic pollutants, heavy metals and emerging contaminants within contaminated soil or sediment, elucidating the influential factors and strategies aimed at enhancing pollutant removal processes within SBESs. The current emerging problems and limitations of microbial electrochemical remediation technology are summarized, and it is suggested that future development should focus on microorganisms, reactors and practical applications.

Arthrospira platensis nanoparticles dietary supplementation improves growth performance, steroid hormone balance, and reproductive productivity of Nile tilapia (Oreochromis niloticus) broodstock

This study evaluates the impact of dietary supplementation of the blue-green alga Arthrospira platensis NIOF17/003 nanoparticles (AN) on the growth performance, whole-body biochemical compositions, blood biochemistry, steroid hormonal, and fry production efficiency of Nile tilapia (Oreochromis niloticus) broodstock, during the spawning season. After a 21-day preparation period to equip the females and ensure that their ovaries were filled with eggs, mating between the mature females and males took place in a 3:1 ratio during a 14-day spawning cycle. A total of 384 tilapia broodstock 288 females and 96 males with an initial body weight of 450.53±0.75, were divided into four groups; AN0: a basal diet as a control group with no supplementation of Arthrospira platensis, and the other three groups (AN2, AN4, and AN6) were diets supplemented with nanoparticles of A. platensis at levels of 2, 4, and 6 g kg─1 diet, respectively. The results found that fish-fed group AN6 showed the highest significant differences in weight gain (WG), final weight (FW), feed conversion ratio (FCR), protein efficiency ratio (PER), and feed efficiency ratio (FER). Females fed the AN6 diet showed the highest significant fat content. Compared to the AN0 group, fish fed on the supplemented diets showed significant improvement (p < 0.05) in triglyceride, glucose, and aspartate aminotransferase (AST). A gradual increase in AN inclusion level resulted in a gradual increase in the concentrations of luteinizing hormone (LH), and follicle-stimulating hormone (FSH), testosterone, progesterone, and prolactin. The rates (%) of increase in fry production for females fed supplemented diets were 10.5, 18.6, and 32.2% for AN2, AN4, and AN6, respectively, compared to the control group. This work concluded that the inclusion levels of 6 g kg─1 of A. platensis nanoparticles in the diet of Nile tilapia broodstock significantly improved the growth performances, steroid hormone concentrations, and increased the fry production efficiency by 32.2%, respectively. These findings revealed that A. platensis nanoparticles resulted in a significantly enhanced female' reproductive productivity of Nile tilapia broodstock.

Microalgae-bacteria nexus for environmental remediation and renewable energy resources: Advances, mechanisms and biotechnological applications

Microalgae and bacteria, known for their resilience, rapid growth, and proximate ecological partnerships, play fundamental roles in environmental and biotechnological advancements. This comprehensive review explores the synergistic interactions between microalgae and bacteria as an innovative approach to address some of the most pressing environmental issues and the demands of clean and renewable freshwater and energy sources. Studies indicated that microalgae-bacteria consortia can considerably enhance the output of biotechnological applications; for instance, various reports showed during wastewater treatment the COD removal efficiency increased by 40%-90.5 % due to microalgae-bacteria consortia, suggesting its great potential amenability in biotechnology. This review critically synthesizes research works on the microalgae and bacteria nexus applied in the advancements of renewable energy generation, with a special focus on biohydrogen, reclamation of wastewater and desalination processes. The mechanisms of underlying interactions, the environmental factors influencing consortia performance, and the challenges and benefits of employing these bio-complexes over traditional methods are also discussed in detail. This paper also evaluates the biotechnological applications of these microorganism consortia for the augmentation of biomass production and the synthesis of valuable biochemicals. Furthermore, the review sheds light on the integration of microalgae-bacteria systems in microbial fuel cells for concurrent energy production, waste treatment, and resource recovery. This review postulates microalgae-bacteria consortia as a sustainable and efficient solution for clean water and energy, providing insights into future research directions and the potential for industrial-scale applications.

Efficiency of the fatty acids extracted from the microalga Parachlorella kessleri in wound-healing

Wound healing is a physiological process that results in the reconstruction and restoration of granulation tissue, followed by scar formation. We explored the impact of fatty acids in the form of oils on wound healing since they are part of membrane phospholipids and participate in the inflammatory response. This work investigated the efficiency of fatty acids extracted from microalga Parachlorella kessleri in treating excisional wounds and burns and evaluated their antioxidant activity. The rationale behind this investigation lies in the integral role fatty acids play in membrane phospholipids and their involvement in the inflammatory response. Among different nitrogen sources, glycine showed the highest biomass and lipid productivity (0.08 g L-1 d-1 and 58.37 μgml-1 day-1, respectively). Based on the percentage of polyunsaturated fatty acids that increased by 50.38 % in the Glycine culture of P. kessleri, both total antioxidant capacity and DPPH radical scavenging activity were higher in the Glycine culture than control culture. In 30 anaesthetized male mice divided into 6 groups, using either a burn or an excision, two identical paravertebral full-thickness skin lesions were created. Either oils of P. kessleri (extracted from control and glycine culture) ointments or the vehicle (placebo cream) were applied twice daily to the excisional wounds of mice, while mebo cream was used for burn wounds as well as P. kessleri oil. P. kessleri oils (control or glycine culture) showed a significant effect on the reduction of excisional wounds and burns. Histopathological analysis showed that angiogenesis, collagen fiber formation, and epidermis creation were some of the healing indicators that improved. The key elements for this healing property are omega -3 fatty acids, and both P. kessleri oils extracted from control and glycine culture have significant wound-healing effects. Oil of glycine culture of P. kessleri, however, displayed superior results in this regard.

Microalgae-material hybrid for enhanced photosynthetic energy conversion: a promising path towards carbon neutrality

Photosynthetic energy conversion for high-energy chemicals generation is one of the most viable solutions in the quest for sustainable energy towards carbon neutrality. Microalgae are fascinating photosynthetic organisms, which can directly convert solar energy into chemical energy and electrical energy. However, microalgal photosynthetic energy has not yet been applied on a large scale due to the limitation of their own characteristics. Researchers have been inspired to couple microalgae with synthetic materials via biomimetic assembly and the resulting microalgae-material hybrids have become more robust and even perform new functions. In the past decade, great progress has been made in microalgae-material hybrids, such as photosynthetic carbon dioxide fixation, photosynthetic hydrogen production, photoelectrochemical energy conversion and even biochemical energy conversion for biomedical therapy. The microalgae-material hybrid offers opportunities to promote artificially enhanced photosynthesis research and synchronously inspires investigation of biotic-abiotic interface manipulation. This review summarizes current construction methods of microalgae-material hybrids and highlights their implication in energy and health. Moreover, we discuss the current problems and future challenges for microalgae-material hybrids and the outlook for their development and applications. This review will provide inspiration for the rational design of the microalgae-based semi-natural biohybrid and further promote the disciplinary fusion of material science and biological science.

Evaluating application of photosynthetic microbial fuel cell to exhibit efficient carbon sequestration with concomitant value-added product recovery from wastewater: A review

The emission of CO2 from industrial (24%) and different anthropogenic activities, like transportation (27%), electricity production (25%), and agriculture (11%), can lead to global warming, which in the long term can trigger substantial climate changes. In this regard, CO2 sequestration and wastewater treatment in tandem with bioenergy production through photosynthetic microbial fuel cell (PMFC) is an economical and sustainable intervention to address the problem of global warming and elevating energy demands. Therefore, this review focuses on the application of different PMFC as a bio-refinery approach to produce biofuels and power generation accompanied with the holistic treatment of wastewater. Moreover, CO2 bio-fixation and electron transfer mechanism of different photosynthetic microbiota, and factors affecting the performance of PMFC with technical feasibility and drawbacks are also elucidated in this review. Also, low-cost approaches such as utilization of bio-membrane like coconut shell, microbial growth enhancement by extracellular cell signalling mechanisms, and exploitation of genetically engineered strain towards the commercialization of PMFC are highlighted. Thus, the present review intends to guide the budding researchers in developing more cost-effective and sustainable PMFCs, which could lead towards the commercialization of this inventive technology.

Emerging Applications of Chlorella sp. and Spirulina (Arthrospira) sp

Chlorella sp. and Spirulina (Arthrospira) sp. account for over 90% of the global microalgal biomass production and represent one of the most promising aquiculture bioeconomy systems. These microorganisms have been widely recognized for their nutritional and therapeutic properties; therefore, a significant growth of their market is expected, especially in the nutraceutical, food, and beverage segments. However, recent advancements in biotechnology and environmental science have led to the emergence of new applications for these microorganisms. This paper aims to explore these innovative applications, while shedding light on their roles in sustainable development, health, and industry. From this state-of-the art review, it was possible to give an in-depth outlook on the environmental sustainability of Chlorella sp. and Spirulina (Arthrospira) sp. For instance, there have been a variety of studies reported on the use of these two microorganisms for wastewater treatment and biofuel production, contributing to climate change mitigation efforts. Moreover, in the health sector, the richness of these microalgae in photosynthetic pigments and bioactive compounds, along with their oxygen-releasing capacity, are being harnessed in the development of new drugs, wound-healing dressings, photosensitizers for photodynamic therapy, tissue engineering, and anticancer treatments. Furthermore, in the industrial sector, Chlorella sp. and Spirulina (Arthrospira) sp. are being used in the production of biopolymers, fuel cells, and photovoltaic technologies. These innovative applications might bring different outlets for microalgae valorization, enhancing their potential, since the microalgae sector presents issues such as the high production costs. Thus, further research is highly needed to fully explore their benefits and potential applications in various sectors.

Life in biophotovoltaics systems

As the most suitable potential clean energy power generation technology, biophotovoltaics (BPV) not only inherits the advantages of traditional photovoltaics, such as safety, reliability and no noise, but also solves the disadvantages of high pollution and high energy consumption in the manufacturing process, providing new functions of self-repair and natural degradation. The basic idea of BPV is to collect light energy and generate electric energy by using photosynthetic autotrophs or their parts, and the core is how these biological materials can quickly and low-loss transfer electrons to the anode through mediators after absorbing light energy and generating electrons. In this mini-review, we summarized the biological materials widely used in BPV at present, mainly cyanobacteria, green algae, biological combinations (using multiple microorganisms in the same BPV system) and isolated products (purified thylakoids, chloroplasts, photosystem I, photosystem II), introduced how researchers overcome the shortcomings of low photocurrent output of BPV, pointed out the limitations that affected the development of BPV' biological materials, and put forward reasonable assumptions accordingly.

A biotechnological roadmap for decarbonization systems combined into bioenergy production: Prelude of environmental life-cycle assessment

Decarbonization has become a critical issue in recent years due to rising energy demands and diminishing oil resources. Decarbonization systems based on biotechnology have proven to be a cost-effective and environmentally benign technique of lowering carbon emissions. Bioenergy generation is an environmentally friendly technique for mitigating climate change in the energy industry, and it is predicted to play an important role in lowering global carbon emissions. This review essentially provides a new perspective on the unique biotechnological approaches and strategies based decarbonization pathways. Furthermore, the application of genetically engineered microbes in CO₂ biomitigation and energy generation is particularly emphasized. The production of biohydrogen and biomethane via anaerobic digestion techniques has been highlighted in the perspective. In this review, role of microorganisms in bioconversion of CO₂ into different types of bioproducts such as biochemical, biopolymers, biosolvents and biosurfactant was summarized. The current analysis, which includes an in-depth discussion of a biotechnology-based roadmap for the bioeconomy, provides a clear picture of sustainability, forthcoming challenges, and perspectives.

Chemotactic movement and zeta potential dominate Chlamydomonas microsphaera attachment and biocathode development

Microalgal cell attaching and biofilm formation are critical in the application of microalgal biocathode, which severs as one of the hopeful candidates to an original cathode in bioelectrochemical systems. Many efforts have been put in biofilm formation and bioelectrochemical systems for years, but the predominant factors shaping microalgal biocathode formation are sketchy. We launched a pair of researches to investigate microalgal attachment and biofilm formation in the presence/absence of applied voltages using Chlamydomonas microsphaera as a model unicellular motile microalga. In this study, we presented how microalga attached and biofilm formed on a carbon felt surface without applied voltages and try to manifest the most important aspects in this process. Results showed that while nutrient sources did not directly regulate cell attachment onto the carbon felt, limited initial nutrient concentration nevertheless promoted cell attachment. Specifically, nutrient availability did not influence the early stage (20-60 min) of microalgal cell attachment but did significantly impact cell attachment during later stages (240-720 min). Further analysis revealed that nutrient availability-mediated chemotactic movements and zeta potential are crucial to facilitate the initial attachment and subsequent biofilm formation of C. microsphaera onto the surfaces, serving as an important factor controlling microalgal surface attachment. Our results demonstrate that nutrient availability is a dominant factor controlling microalgal surface attachment and subsequent biofilm formation processes. This study provides a mechanistic understanding of microalgal surface attachment and biofilm formation processes on carbon felts surfaces in the absence of applied voltages.

A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels

The feasibility of microalgal biomass as one of the most promising and renewable sources for the production of biofuels is being studied extensively. Microalgal biomass can be cultivated under photoautotrophic, heterotrophic, photoheterotrophic, and mixotrophic cultivation conditions. Photoautotrophic cultivation is the most common way of microalgal biomass production. Under mixotrophic cultivation, microalgae can utilize both organic carbon and CO2 simultaneously. Mixotrophic cultivation depicts higher biomass productivity as compared to photoautotrophic cultivation. It is evident from the literature that mixotrophic cultivation yields higher quantities of polyunsaturated fatty acids as compared to that photoautotrophic cultivation. In this context, for economical biomass production, the organic carbon of industrial wastewaters can be valorized for the mixotrophic cultivation of microalgae. Following the way, contaminants' load of wastewaters can be reduced while concomitantly producing highly productive microalgal biomass. This review focuses on different aspects covering the sustainable cultivation of different microalgal species in different types of wastewaters.

Commercial Seaweed Liquid Extract as Strawberry Biostimulants and Bioethanol Production

Seaweeds are increasingly intriguing as a sustainable source of bioactive compounds. They have applications in agriculture, fuels, feed, and food products. To become a cost-competitive product with zero waste, a biorefinery approach is applied, where several products are valorized at the same time. True-Algae-Max (TAM®) has been investigated for its ability to improve the yield and nutritional facts of a strawberry plant. Three concentrations of TAM (0, 50, and 100%) were examined by foliar spray in 2017 with 50% NPK chemical fertilizer. Results indicated that growth, yield, chlorophyll, and potassium content were significantly improved by TAM treatments. TAM50 % resulted in maximum root length, leaf area, plant fresh weight, fruit weight, and yield with an increase ranging from 10 to 110% compared to control. Compared to the NPK control, strawberries grown with TAM50% improved total soluble solids (TSS) from 7.58 to 10.12% and anthocyanin from 23.08 to 29.42 mg CGE 100 g-1. Noteworthily, this reduced total sugar, and total phenolics were boosted by TAM applications, while non-reducing sugar was reduced compared to control. On the other hand, whole seaweed biomass and TAM residuals were used for bioethanol production by acid scarification. The maximum bioethanol yield was observed in residual biomass (0.34 g g-1 dw), while the whole seaweed biomass showed only 0.20 g g-1 dw. These results proved the biorefinery concept of using seaweed extract as a biostimulator and bioethanol production.

Data-driven analysis on immobilized microalgae system: New upgrading trends for microalgal wastewater treatment

Microalgal immobilization is receiving increasing attention as one of the most viable alternatives for upgrading conventional wastewater treatment. However, an in-depth discussion of the state-of-the-art and limitations of available technologies is currently lacking. More importantly, the reason for the hesitant development of immobilized microalgae for wastewater treatment remains unclear, which hinders its practical application. Thus, comprehensively understanding and evaluating details on immobilized microalgae is urgently needed, especially for the current advances of immobilization of microalgae in wastewater treatment over the last few decades. In this review, scientometric approach is used to explore research hotspots and visualize emerging trends. Data-driven analysis is used to scientifically and methodically determine hotspots in the current research on immobilized microalgal wastewater treatment, along with that the implicit inner connection underlying the frequent co-occurring terms was explored in depth. Four hotspots focusing on immobilized microalgae for wastewater treatment were identified, mainly demonstrating: (1) main factors including light, temperature and immobilization methods would majorly affect the treatment performance of immobilized microalgae; (2) immobilized microalgae membrane bioreactor, immobilized microalgae-based microbial fuel cell and immobilized microalgae-based bed reactor are three dominant treatment systems; (3) immobilized microalgae have a higher robustness and tolerance for treating various types of wastewater; and (4) a complete sustainable circle from wastewater treatment to resource conversion via the immobilized microalgae can be achieved. Finally, several new directions and new perspectives that expose the necessity for fulfilling further research and fundamental gaps are pointed out. Taken together, this review provides helpful information to facilitate the development of innovative and feasible immobilized microalgal technologies thus increasing their viability and sustainability.

Advanced insights on removal of antibiotics by microalgae-bacteria consortia: A state-of-the-art review and emerging prospects

Antibiotics abuse has triggered a growing environmental problem, posing a major threat to both ecosystem and human health. Unfortunately, there are still several shortcomings to current antibiotics removal technologies. Microalgae-bacteria consortia have been shown to be a promising antibiotics treatment technology owing to advantages of high antibiotics removal efficiency, low operational cost, and carbon emission reduction. This review aims to introduce the removal mechanisms, influencing factors, and future research perspectives for using microalgae-bacteria consortia to remove antibiotics. The interaction mechanisms between microalgae and bacteria are comprehensively revealed, and their exclusive advantages have been summarized in a "Trilogy" strategy, including "reinforced physical contact", "upgraded substance utilization along with antibiotics degradation", and "robust biological regulation". What's more, the relationship between different interaction mechanisms is emphatically analyzed. The important influencing factors, including concentration and classes of antibiotics, environmental conditions, and operational parameters, of antibiotics removal were also assessed. Three innovative treatment systems (microalgae-bacteria fuel cells (MBFCs), microalgae-bacteria membrane photobioreactors (MB-MPBRs), and microalgae-bacteria granular sludge (MBGS)) along with three advanced techniques (metabolic engineering, machine learning, and molecular docking and dynamics) are then introduced. In addition, concrete implementing schemes of the above advanced techniques are also provided. Finally, the current challenges and future research directions in using microalgae-bacteria consortia to remove antibiotics have been summarized. Overall, this review addresses the current state of microalgae-bacteria consortia for antibiotics treatment and provides corresponding recommendations for enhancing antibiotics removal efficiency.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Green Power Generation by Microbial Fuel Cells Using Pharmaceutical Wastewater as Substrate and Electroactive Biofilms (Bacteria/Biocarbon)

In this work, electroactive biofilms of Bacillus subtilis (B. subtilis) or Escherichia coli (E. coli) were supported on functionalized biocarbon (AB7-F), which was synthesized from waste leather and was used as catalysts to develop bioanodes for microbial fuel cells (MFCs). This way, bioanodes were fabricated and further evaluated in a three-electrode cell using pharmaceutical wastewater (PWW) as substrate. The electrochemical measurements showed a higher performance of the bioanode based on AB7-f+ B. subtilis to oxidize organic matter from PWW. The polarization curves in the dual-chamber MFC showed that AB7-f+ B. subtilis bioanode can generate an open circuit voltage of 602 mV and a power density of 77 mW m−2. During long-term tests of the MFC, a variation in performance was observed, with a maximum of 96.3 mW m−2 on day 7. Such variation was attributed to the development of more stable biofilm as well as consumption of some compounds metabolized by bacteria grown on the bioanode. The results showed that AB7-f+ B. subtilis can be used as bioanode for MFCs with PWW as substrate removing around 45% of the chemical oxygen demand (COD).

Critical Review on Nanomaterials for Enhancing Bioconversion and Bioremediation of Agricultural Wastes and Wastewater

Anaerobic digestion (AD), microalgae cultivation, and microbial fuel cells (MFCs) are the major biological processes to convert organic solid wastes and wastewater in the agricultural industry into biofuels, biopower, various biochemical and fertilizer products, and meanwhile, recycle water. Various nanomaterials including nano zero valent irons (nZVIs), metal oxide nanoparticles (NPs), carbon-based and multicompound nanomaterials have been studied to improve the economics and environmental sustainability of those biological processes by increasing their conversion efficiency and the quality of products, and minimizing the negative impacts of hazardous materials in the wastes. This review article presented the structures, functionalities and applications of various nanomaterials that have been studied to improve the performance of AD, microalgae cultivation, and MFCs for recycling and valorizing agricultural solid wastes and wastewater. The review also discussed the methods that have been studied to improve the performance of those nanomaterials for their applications in those biological processes.

Exploring indigenous freshwater chlorophytes in integrated biophotovoltaic system for simultaneous wastewater treatment, heavy metal biosorption, CO2 biofixation and biodiesel generation

The study explored the combined photosynthetic activities of two green microalgal species, Tetradesmus obliquus and Tetradesmus reginae, on an integrated biophotovoltaic (BPV) platform for simultaneous wastewater treatment, toxic metal biosorption, carbon biofixation, bioelectricity generation and biodiesel production. The experimental setup comprised of a dual-chambered BPV with copper anode surrounded by T. obliquus in BG11 media, and copper cathode with T. reginae in municipal wastewater separated by Nafion 117 membrane. The study reported a maximum power density of 0.344 Wm^-2 at a cell potential of 0.415 V with external resistance of 1000 Ω and 0.3268 V maximum open-circuit voltage. The wastewater electrical conductivity and pH increased from 583 ± 22 to 2035 ± 29.31 mS/cm and 7.403 ± 0.174 to 8.263 ± 0.055 respectively, signifying increased photosynthetic and electrochemical activities. Residual nitrogen, phosphorus, chemical oxygen demand, arsenic, cadmium, chromium and lead removal efficiencies by T. reginae were 100%, 80.68%, 71.91%, 47.6%, 88.82%, 71.24% and 92.96%, respectively. T. reginae accumulated maximum biomass of 0.605 ± 0.033 g/L with a CO₂ biosequestration rate of 0.166 ± 0.010 gCO₂/L/day and 42.40 ± 1.166% lipid content. Methyl palmitate, methyl undecanoate and 13-octadecenoic acid with relative abundances of 37.24%, 24.80% and 12.02%, respectively were confirmed.

Electrical generation and methane emission from an anoxic riverine sediment slurry treated by a two-chamber microbial fuel cell

A two-chamber slurry microbial fuel cell (SMFC) was constructed using black-odorous river sediments as substrate for the anode. We tested addition of potassium ferricyanide (K₃[Fe(CN)₆]) or sodium chloride (NaCl) to the cathode chamber (0, 50, 100, 150, and 200 mM) and aeration of the cathode chamber (0, 2, 4, 6, and 8 h per day) to assess their response on electrical generation, internal resistance, and methane emission over a 600-h period. When the aeration time in the cathode chamber was 6 h and K₃[Fe(CN)₆] or NaCl concentrations were 200 mM, the highest power densities were 6.00, 6.45, and 6.64 mW·m^-2, respectively. With increasing K₃[Fe(CN)₆] or NaCl concentration in the cathode chamber, methane emission progressively decreased (mean ± SD: 181.6 ± 10.9 → 75.5 ± 9.8 mg/m³·h and 428.0 ± 28.5 → 157.0 ± 35.7 mg/m³·h), respectively, but was higher than the reference having no cathode/anode electrodes (~ 30 mg/m³·h). Cathode aeration (0 → 8 h/day) demonstrated a reduction in methane emission from the anode chamber for only the 6-h treatment (mean: 349.6 ± 37.4 versus 299.4 ± 34.7 mg/m³·h for 6 h/day treatment); methane emission from the reference was much lower (85.3 ± 26.1 mg/m³·h). Our results demonstrate that adding an electron acceptor (K₃[Fe(CN)₆]), electrolyte solution (NaCl), and aeration to the cathode chamber can appreciably improve electrical generation efficiency from the MFC. Notably, electrical generation stimulates methane emission, but methane emission decreases at higher power densities.

A review on the current status and post-pandemic prospects of third-generation biofuels

The rapid increase in fossil fuel depletion, environmental degradations, and industrialization have encouraged the need and production of sustainable fuel alternatives. This has led to the increase in interest in biofuels, especially third-generation biofuels produced from microalgae since they do not compete with food and land supplies. However, the global share for these biofuels has been inadequate recently, especially due to the ongoing global pandemic. Therefore, this paper offers a review of the state-of-the-art study of the production field of third-generation biofuel from microalgae. The current review aims to focus on the different aspects of algal biofuel production that requires further attention to produce it at a large scale. It was found that several strategies during the life cycle of algal biofuel production can significantly increase its quality and yield while reducing cost, energy, and other related attributes. This paper also focuses on the challenges for large-scale production of third-generation biofuels pre and post COVID-19 to better understand the barriers. The high cost of this fuel’s production and sale tends to be the major reason behind the lack of large-scale production, hence, inadequacy to meet the global need. Third-generation biofuel has so much to offer including many integrated applications and advanced uses in the future fuel industry. Therefore, it is important to cope with the ongoing circumstances and emphasize the future of algal biofuel as a sustainable source.

Sustainable bioelectricity generation using Cladophora sp. as a biocathode in membrane-less microbial fuel cell

In this study, the Cladophora sp. is used to provide oxygen to the cathode of the photosynthetic biocathode membrane-less microbial fuel cell (PB-MLMFC). Non-aerated (NA-MLMFC) and mechanically-aerated (MA-MLMFC) MLMFCs are operated under similar operating conditions to evaluate the performance of PB-MLMFC with the presence of Cladophora sp. The PB-MLMFC exhibits the highest dissolved oxygen (DO) concentration, which results in a more efficient oxygen reduction reaction and a significant improvement in the electricity generation performance. The maximum power density of PB-MLMFC is 619.1 mW m^-2, which is the highest power density known to be reported for algal cathode MFCs in the literature. The electrochemical analysis shows that theCladophora sp.reduces the charge (R_ct) and mass transfer (R_mt) resistances of the PB-MLMFC, and improves the bioelectrochemical activity of the anode microorganisms. The study reveals that Cladophora sp. provides a cost-effective and renewable approach for practical applications of MLMFCs.

Impact of light on microalgal photosynthetic microbial fuel cells and removal of pollutants by nanoadsorbent biopolymers: Updates, challenges and innovations

Photosynthetic microbial fuel cells (PMFCs) with microalgae have huge potential for treating wastewater while simultaneously converting light energy into electrical energy. The efficiency of such cells directly depends on algal growth, which depends on light intensity. Higher light intensity results in increased potential as well as enhancement in generation of biomass rich in biopolymers. Such biopolymers are produced either by microbes at anode and algae at cathode or vice versa. The biopolymers recovered from these biological sources can be added in wastewater alone or in combination with nanomaterials to act as nanoadsorbents. These nanoadsorbents further increase the efficiency of PMFC by removing the pollutants like metals and dyes. In this review firstly the effect of different light intensities on the growth of microalgae, importance of diatoms in a PMFC and their impact on PMFCs efficiencies have been narrated. Secondly recovery of biopolymers from different biological sources and their role in removal of metals, dyes along with their impact on circular bioeconomy have been discussed. Thereafter bottlenecks and future perspectives in this field of research have been narrated.

From Waste to Watts: Updates on Key Applications of Microbial Fuel Cells in Wastewater Treatment and Energy Production

Due to fossil fuel depletion and the rapid growth of industry, it is critical to develop environmentally friendly and long-term alternative energy technologies. Microbial fuel cells (MFCs) are a powerful platform for extracting energy from various sources and converting it to electricity. As no intermediate steps are required to harness the electricity from the organic substrate’s stored chemical energy, MFC technology offers a sustainable alternative source of energy production. The generation of electricity from the organic substances contained in waste using MFC technology could provide a cost-effective solution to the issue of environmental pollution and energy shortages in the near future. Thus, technical advancements in bioelectricity production from wastewater are becoming commercially viable. Due to practical limitations, and although promising prospects have been reported in recent investigations, MFCs are incapable of upscaling and of high-energy production. In this review paper, intensive research has been conducted on MFCs’ applications in the treatment of wastewater. Several types of waste have been extensively studied, including municipal or domestic waste, industrial waste, brewery wastewater, and urine waste. Furthermore, the applications of MFCs in the removal of nutrients (nitrogen and sulphates) and precious metals from wastewater were also intensively reviewed. As a result, the efficacy of various MFCs in achieving sustainable power generation from wastewater has been critically addressed in this study.

Management of Cattle Dung and Novel Bioelectricity Generation Using Microbial Fuel Cells: An Ingenious Experimental Approach

Microbial fuel cells (MFCs) are the rising modern equipment for the generation of bioelectricity from organic matters. In this study, MFCs in two formats are assembled and concurrently operated for a 30-day period in a batch mode manner. Natural biowaste cattle dung slurry with mediators is used as a substrate persistently for the enhancement of electron transfer rate and additionally for the augmentation of required electrical parameters. Under similar conditions, the MFC setups are experimented with a variety of anode-cathode material combinations, namely carbon-carbon, copper-carbon, and zinc-carbon. The performance of these MFCs during the testing period is evaluated independently and compared by plotting polarization data generated by them. It is revealed that maximum current and power densities are achieved from all these MFCs and the best attained values are 1858 mA/m2 and 1465 mW/m2, respectively, for the novel single-chamber zinc-carbon electrode MFC. The corresponding findings present that the MFC with zinc-carbon electrodes has the better power density than other MFCs. Being conductive and higher standard potential metal electrodes have improved the capability to act in place of carbon family electrodes for MFC-based power applications. Although the MFC power generation is low, but modifications in configurations, electrodes, microbe-rich biowaste, mediators, and power management may enhance the power output to a significant level for commercialization of this technology. The unique feature of this research is to explore the pertinent use of conductive metal electrodes to enhance the power generation capability of MFCs through biowaste as an alternative power source for small applications. The novelty of this research is presented through usage of conductive metal electrodes for the performance analysis of MFCs.

Influence of Nutrient Manipulation on Growth and Biochemical Constituent in Anabaena variabilis and Nostoc muscorum to Enhance Biodiesel Production

The present study aims to improve biomass and biochemical constituents, especially lipid production of Anabaena variabilis and Nostoc muscorum by formulating an optimal growth condition using various concentrations of nutrients (NO3−, PO43− and CO32−) for biodiesel production. The supplementation of the three nutrients by +50% showed the maximum dry weight and biomass productivity, while the macromolecule contents were varied. The depletion of N-NO3− by 50% N-NO3− showed the maximum lipid yield (146.67 mg L−1) in A. variabilis and the maximum carbohydrate contents (285.33 mg L−1) in N. muscorum with an increase of 35% and 30% over control of the synthetic medium, respectively. However, variation in P-PO43− and C-CO32− showed insignificant improving results for all biochemical compositions in both cyanobacteria. A. variabilis was the superior species for lipid and protein accumulation; however, N. muscorum showed the maximum carbohydrate content. Accordingly, A. variabilis was selected for biodiesel production. In A. variabilis, −50% N-NO3− resulted in 35% higher lipid productivity compared to the control. Furthermore, the fatty acid profile and biodiesel quality-related parameters have improved under this condition. This study has revealed the strategies to improve A. variabilis lipid productivity for biodiesel production for small-scale in vitro application in terms of fuel quality under low nitrate levels.

Carbon Nanotube/Pt Cathode Nanocomposite Electrode in Microbial Fuel Cells for Wastewater Treatment and Bioenergy Production

In this paper, we reported the fabrication, characterization, and application of carbon nanotube (CNT)-platinum nanocomposite as a novel generation of cathode catalyst in microbial fuel cells (MFCs) for sustainable energy production and wastewater treatment. The efficiency of the carbon nanocomposites was compared by platinum (Pt), which is the most effective and common cathode catalyst. This nanocomposite is utilized to benefit from the catalytic properties of CNTs and reduce the amount of required Pt, as it is an expensive catalyst. The CNT/Pt nanocomposites were synthesized via a chemical reduction technique and the electrodes were characterized by field emission scanning electron microscopy, electronic dispersive X-Ray analysis, and transmission electron microscopy. The nanocomposites were applied as cathode catalysts in the MFC to obtain polarization curve and coulombic efficiency (CE) results. The catalytic properties of electrodes were tested by linear sweep voltammetry. The CNT/Pt at the concentration of 0.3 mg/cm2 had the highest performance in terms of CE (47.16%), internal resistance (551 Ω), COD removal (88.9%), and power generation (143 mW/m2). In contrast, for the electrode with 0.5 mg/L of Pt catalyst, CE, internal resistance, COD removal, and power generation were 19%, 810 Ω, 96%, and 84.1 mW/m2, respectively. So, it has been found that carbon nanocomposite cathode electrodes had better performance for sustainable clean energy production and COD removal by MFC.

Flocculation of Chlorella vulgaris with alum and pH adjustment

Microalgae, a group of photosynthetic microorganisms, are a promising feedstock for biodiesel production, but their biomass retrieval is a challenging task. Flocculation is a feasible method for dewatering and harvesting microalgae biomass. In the current study, the effect of alum flocculation on Chlorella vulgaris biomass retrieval has been studied. Alum structural changes with pH were led to a full factorial design to address the effect of this chemical structure changes at different pH values. It is observed that the best flocculation efficiency could be achieved in the natural pH value of C. vulgaris growth medium (8.2) with less than 0.5 g/L flocculant addition, which would lead to the flocculation efficiency of more than 90%. An ensemble architecture of neural networks successfully employed for flocculation modeling.

The Potential of a New Commercial Seaweed Extract in Stimulating Morpho-Agronomic and Bioactive Properties of Eruca vesicaria (L.) Cav

This study aimed to understand the effect of commercial seaweed extract as a biofertilizer, named True-Algae-Max (TAM®), on the yield, nutritional, antioxidant, and cytotoxic activity of Eruca vesicaria. Three concentrations of TAM® (5, 10, and 15%) were studied by foliar spray over the two cultivation years (2016 and 2017) without any chemical fertilizer, along with a control consisting of synthetic nitrogen, phosphorus and potassium (NPK) fertilizers. The yield and composition of E. vesicaria were significantly improved in all treatments, particularly at 10% concentration of TAM®, which resulted in maximum yield (1.99 kg m−2) and significant amounts of chlorophyll, carotenoids, phenolic compounds, flavonoids and total nutrients. Compared to the NPK control, E. vesicaria grown with 10% of TAM® improved total antioxidant activity from 41.80 to 49.36 mg g−1 and cytotoxicity from 25.30 to 60.40% with an IC50 value 85.7 µg mL−1 against the hepatocellular carcinoma cell line (HepG2). These findings indicate that seaweed extract can generally be used as a safe potential multifunctional biofertilizer in the agricultural field. The use of seaweed as a biofertilizer could potentially help mitigate the adverse effects of main nutrient deficiencies, diminishing the use of chemical fertilizers.