Optimisation and characterisation of bioadhesive controlled release tetracycline microspheres

A probe of new molecularly imprinted solid-phase extraction coupled with HPLC-DAD and atomic absorption spectrophotometry for quantification of tetracycline HCl, metronidazole and bismuth subcitrate in combination with their official impurities: Application in dosage form and human plasma

The integration of molecular imprinting technique with chromatographic one has a great impact on the assay's selectivity and sensitivity. Herein, a molecularly imprinted solid-phase extraction associated with high performance liquid chromatography (MISPE-HPLC) was employed for simultaneous determination of the co-formulated drugs; tetracycline hydrochloride (TET) and metronidazole (MET), in plasma and in their anti-H-pylori drug for the first time. Two sorts of molecularly imprinted polymers (MIPs) were fabricated using TET and MET as the template molecules, while ethylene glycol dimethacrylate and methacrylic acid were used as a cross-linker and a monomer, respectively. The synthesized MIPs were identified using different techniques. The adsorption-desorption capability of each template was investigated towards its corresponding MIP. The extraction conditions of MISPE was optimized with respect to TET/MIP and MET/MIP sorbent. Bismuth subcitrate (BSC), the third co-formulated drug was analyzed in spiked human plasma using an atomic absorption spectrometric (AAS) method. The performance of the developed methods was assured as per ICH guidelines for analyzing the studied drugs in their pharmaceutical dosage form along with two of their official impurities. In addition, bioanalytical method validation was conducted where linearity was achieved at 2.0-40.0 μg mL-1, 2.0-40.0 μg mL-1 and 5.0-80.0 μg mL-1 for TET, MET and BSC, respectively.

Molecular imprinted polymer-based potentiometric approach for the assay of the co-formulated tetracycline HCl, metronidazole and bismuth subcitrate in capsules and spiked human plasma

BACKGROUND

An anti-H-pylori co-formulated mixture of tetracycline HCl (TET), metronidazole (MET), and bismuth subcitrate (BSC) is recently available. Only two chromatographic and spectrophotometric methods are reported for determining those drugs simultaneously where the effect of impurities that could be present as well as the biological fluids matrix influence do not be taken into consideration. There is a need to develop an easy-to-use potentiometric technique for analysis of TET, MET, and BSC in their co-formulated capsules, in presence of some official impurities and in spiked human plasma.

RESULTS

Three carbon paste electrodes (CPEs) were fabricated for this purpose. Being a solid contact ion-selective electrode, CPE suffers from the creation of a water layer affecting its stability and reproducibility. Besides, it has a common problem in differentiation between two drugs carrying the same charge (positively charged TET and MET). Water layer formation was prevented through inserting polyaniline nanoparticles (≈10.0 nm diameter) between solid contact and ion-sensing membrane in the three proposed sensors. TET and MET interference was overcome by synthesizing a corresponding molecular imprinted polymer (MIP) for each drug. The synthesized MIPs were inserted in equivalent sensing membranes and characterized using several techniques. The suggested MIPs have a noticeable enhanced sensitivity in potentiometric determination. The obtained LODs were 5.88 × 10-8, 5.19 × 10-7, and 1.73 × 10-6 M for TET, MET and BSC proposed CPEs, respectively, with corresponding slopes of 57.37, 56.20, and -57.40 mV decade-1.

SIGNIFICANCE

The proposed potentiometric method makes the detection of the three cited drugs simple, fast, and feasible. This approach is the first for determining three drugs potentiometrically in one combined formulation. The obtained results were compared favorably with previously reported potentiometric methods.

Anticancer activity of thymoquinone against breast cancer cells: Mechanisms of action and delivery approaches

The rising incidence of breast cancer has been a significant source of concern in the medical community. Regarding the adverse effects and consequences of current treatments, cancers' health, and socio-economical aspects have become more complicated, leaving research aimed at improved or new treatments on top priority. Medicinal herbs contain multitarget compounds that can control cancer development and advancement. Owing to Nigella Sativa's elements, it can treat many disorders. Thymoquinone (TQ) is a natural chemical derived from the black seeds of Nigella sativa Linn proved to have anti-cancer and anti-inflammatory properties. TQ interferes in a broad spectrum of tumorigenic procedures and inhibits carcinogenesis, malignant development, invasion, migration, and angiogenesis owing to its multitargeting ability. It effectively facilitates miR-34a up-regulation, regulates the p53-dependent pathway, and suppresses Rac1 expression. TQ promotes apoptosis and controls the expression of pro- and anti-apoptotic genes. It has also been shown to diminish the phosphorylation of NF-B and IKK and decrease the metastasis and ERK1/2 and PI3K activity. We discuss TQ's cytotoxic effects for breast cancer treatment with a deep look at the relevant stimulatory or inhibitory signaling pathways. This review discusses the various forms of polymeric and non-polymeric nanocarriers (NC) and the encapsulation of TQ for increasing oral bioavailability and enhanced in vitro and in vivo efficacy of TQ-combined treatment with different chemotherapeutic agents against various breast cancer cell lines. This study can be useful to a broad scientific community, comprising pharmaceutical and biological scientists, as well as clinical investigators.

Dental delivery systems of antimicrobial drugs using chitosan, alginate, dextran, cellulose and other polysaccharides: A review

Dental caries, periodontal disease, and endodontic disease are major public health concerns worldwide due to their impact on individuals' quality of life. The present problem of dental disorders is the removal of the infection caused by numerous microbes, particularly, bacteria (both aerobes and anaerobes). The most effective method for treating and managing dental diseases appears to be the use of antibiotics or other antimicrobials, which are incorporated in some drug delivery systems. However, due to their insufficient bioavailability, poor availability for gastrointestinal absorption, and pharmacokinetics after administration via the oral route, many pharmaceutical medicines or natural bioactive substances have limited efficacy. During past few decades, a range of polysaccharide-based systems have been widely investigated for dental dug delivery. The polysaccharide-based carrier materials made of chitosan, alginate, dextran, cellulose and other polysaccharides have recently been spotlighted on the recent advancements in preventing, treating and managing dental diseases. The objective of the current review article is to present a brief comprehensive overview of the recent advancements in polysaccharide-based dental drug delivery systems for the delivery of different antimicrobial drugs.

Developed meloxicam loaded microparticles for colon targeted delivery: Statistical optimization, physicochemical characterization, and in-vivo toxicity study

The study aimed to fabricate and evaluate Meloxicam (MLX) loaded Hydroxypropyl Methylcellulose (HPMC) microparticles for colon targeting because MLX is a potent analgesic used in the treatment of pain and inflammation associated with colorectal cancer (CRC). Nevertheless, its efficiency is limited by poor solubility and gastrointestinal tracts (GIT) associated side effects. Seventeen formulations of MLX loaded HPMC microparticles were fabricated by the oil-in-oil (O/O)/ emulsion solvent evaporation (ESE) technique. A 3-factor, 3-level Box Behnken (BBD) statistical design was used to estimate the combined effects of the independent variables on the dependent variables (responses), such as the percent yield (R1), the entrapment efficiency (EE) (R2), mean particle size (R3) and in vitro percentage of cumulative drug release (R4). For physicochemical characterization FTIR, XRD, DSC, and SEM analyses were performed. Biocompatibility and non-toxicity were confirmed by in-vivo acute oral toxicity determination. The percentage yield and EE were 65.75-90.71%, and 70.62-88.37%, respectively. However, the mean particle size was 62.89-284.55 μm, and the in vitro cumulative drug release percentage was 74.25-92.64% for 24 hours. FTIR analysis showed that the composition of the particles was completely compatible, while XRD analysis confirmed the crystalline nature of the pure drug and its transition into an amorphous state after formulation. DSC analysis revealed the thermal stability of the formulations. The SEM analysis showed dense spherical particles. The toxicity study in albino rabbits showed no toxicity and was found biocompatible. The histopathological evaluation showed no signs of altered patterns. Results of this study highlighted a standard colonic drug delivery system with the ability to improve patient adherence and reduce GIT drug-associated side effects in CRC treatment.

DoE approach for development of localized controlled release microspheres of Vancomycin for treatment of septic arthritis

Background

Septic arthritis is a worse condition of RA that is associated with significant morbidity and mortality. Septic arthritis develops due to direct introduction or invasion of pathogens. The objective of the present study was to formulate Vancomycin hydrochloride-loaded microspheres (VMS) based on Box–Behnken design (BBD) and evaluate its efficacy against septic arthritis. The intraarticular administration of optimized Vancomycin hydrochloride-loaded microspheres (OVMS) can reduce dose size, dosing frequency and systemic exposure with local targeted delivery.

Results

OVMS was further characterized for its drug–polymer compatibility using differential scanning calorimetry and Fourier transmission infrared spectroscopy. In vitro antibacterial activity was determined using the cup–plate method and in vivo anti-arthritic efficacy was evaluated by gross examination of septic arthritis. DSC and FTIR studies exhibited no interaction or incompatibilities between the drug and polymer. SEM images revealed that OVMS were spherical. It followed the first-order release rate according to Fick's law. The micromeritic properties indicated good flow property of OVMS. The zone of inhibition by OVMS was 1.5 cm against S. aureus. In vivo antibacterial study revealed that OVMS was significant in reducing septic arthritis and bacterial load, i.e., 110.1 CFU/ml in comparison with the control group (850 CFU/ml).

Conclusions

Thus, OVMS may be used as an effective formulation for the treatment of septic arthritis as compared to marketed IV vancomycin injection after clinical studies.

Controlled Delivery of Pan-PAD-Inhibitor Cl-Amidine Using Poly(3-Hydroxybutyrate) Microspheres

This study deals with the process of optimization and synthesis of Poly(3-hydroxybutyrate) microspheres with encapsulated Cl-amidine. Cl-amidine is an inhibitor of peptidylarginine deiminases (PADs), a group of calcium-dependent enzymes, which play critical roles in a number of pathologies, including autoimmune and neurodegenerative diseases, as well as cancer. While Cl-amidine application has been assessed in a number of in vitro and in vivo models; methods of controlled release delivery remain to be investigated. P(3HB) microspheres have proven to be an effective delivery system for several compounds applied in antimicrobial, wound healing, cancer, and cardiovascular and regenerative disease models. In the current study, P(3HB) microspheres with encapsulated Cl-amidine were produced in a size ranging from ~4–5 µm and characterized for surface morphology, porosity, hydrophobicity and protein adsorption, in comparison with empty P(3HB) microspheres. Cl-amidine encapsulation in P(3HB) microspheres was optimized, and these were found to be less hydrophobic, compared with the empty microspheres, and subsequently adsorbed a lower amount of protein on their surface. The release kinetics of Cl-amidine from the microspheres were assessed in vitro and expressed as a function of encapsulation efficiency. There was a burst release of ~50% Cl-amidine in the first 24 h and a zero order release from that point up to 16 days, at which time point ~93% of the drug had been released. As Cl-amidine has been associated with anti-cancer effects, the Cl-amidine encapsulated microspheres were assessed for the inhibition of vascular endothelial growth factor (VEGF) expression in the mammalian breast cancer cell line SK-BR-3, including in the presence of the anti-proliferative drug rapamycin. The cytotoxicity of the combinatorial effect of rapamycin with Cl-amidine encapsulated P(3HB) microspheres was found to be 3.5% more effective within a 24 h period. The cells treated with Cl-amidine encapsulated microspheres alone, were found to have 36.5% reduction in VEGF expression when compared with untreated SK-BR-3 cells. This indicates that controlled release of Cl-amidine from P(3HB) microspheres may be effective in anti-cancer treatment, including in synergy with chemotherapeutic agents. Using controlled drug-delivery of Cl-amidine encapsulated in Poly(3-hydroxybutyrate) microspheres may be a promising novel strategy for application in PAD-associated pathologies.

Polysaccharide-Based Micro- and Nanosized Drug Delivery Systems for Potential Application in the Pediatric Dentistry

The intensive development of micro- and nanotechnologies in recent years has offered a wide horizon of new possibilities for drug delivery in dentistry. The use of polymeric drug carriers turned out to be a very successful technique for formulating micro- and nanoparticles with controlled or targeted drug release in the oral cavity. Such innovative strategies have the potential to provide an improved therapeutic approach to prevention and treatment of various oral diseases not only for adults, but also in the pediatric dental practice. Due to their biocompatibility, biotolerance and biodegradability, naturally occurring polysaccharides like chitosan, alginate, pectin, dextran, starch, etc., are among the most preferred materials for preparation of micro- and nano-devices for drug delivery, offering simple particle-forming characteristics and easily tunable properties of the formulated structures. Their low immunogenicity and low toxicity provide an advantage over most synthetic polymers for the development of pediatric formulations. This review is focused on micro- and nanoscale polysaccharide biomaterials as dental drug carriers, with an emphasis on their potential application in pediatric dentistry.

Applications of Biopolymers for Drugs and Probiotics Delivery

Research regarding the use of biopolymers has been of great interest to scientists, the medical community, and the industry especially in recent years. Initially used for food applications, the special properties extended their use to the pharmaceutical and medical industries. The practical applications of natural drug encapsulation materials have emerged as a result of the benefits of the use of biopolymers as edible coatings and films in the food industry. This review highlights the use of polysaccharides in the pharmaceutical industries and as encapsulation materials for controlled drug delivery systems including probiotics, focusing on their development, various applications, and benefits. The paper provides evidence in support of research studying the use of biopolymers in the development of new drug delivery systems, explores the challenges and limitations in integrating polymer-derived materials with product delivery optimization, and examines the host biological/metabolic parameters that can be used in the development of new applications.

Polymer-Based Carriers in Dental Local Healing-Review and Future Challenges

Polymers in drug formulation technology and the engineering of biomaterials for the treatment of oral diseases constitute a group of excipients that often possess additional properties in addition to their primary function, i.e., biological activity, sensitivity to stimuli, mucoadhesive properties, improved penetration of the active pharmaceutical ingredient (API) across biological barriers, and effects on wound healing or gingival and bone tissue regeneration. Through the use of multifunctional polymers, it has become possible to design carriers and materials tailored to the specific conditions and site of application, to deliver the active substance directly to the affected tissue, including intra-periodontal pocket delivery, and to release the active substance in a timed manner, allowing for the improvement of the form of application and further development of therapeutic strategies. The scope of this review is polymeric drug carriers and materials developed from selected multifunctional groups of natural, semi-synthetic, and synthetic polymers for topical therapeutic applications. Moreover, the characteristics of the topical application and the needs for the properties of carriers for topical administration of an active substance in the treatment of oral diseases are presented to more understand the difficulties associated with the design of optimal active substance carriers and materials for the treatment of lesions located in the oral cavity.

Alginate: From Food Industry to Biomedical Applications and Management of Metabolic Disorders

Initially used extensively as an additive and ingredient in the food industry, alginate has become an important compound for a wide range of industries and applications, such as the medical, pharmaceutical and cosmetics sectors. In the food industry, alginate has been used to coat fruits and vegetables, as a microbial and viral protection product, and as a gelling, thickening, stabilizing or emulsifying agent. Its biocompatibility, biodegradability, nontoxicity and the possibility of it being used in quantum satis doses prompted scientists to explore new properties for alginate usage. Thus, the use of alginate has been expanded so as to be directed towards the pharmaceutical and biomedical industries, where studies have shown that it can be used successfully as biomaterial for wound, hydrogel, and aerogel dressings, among others. Furthermore, the ability to encapsulate natural substances has led to the possibility of using alginate as a drug coating and drug delivery agent, including the encapsulation of probiotics. This is important considering the fact that, until recently, encapsulation and coating agents used in the pharmaceutical industry were limited to the use of lactose, a potentially allergenic agent or gelatin. Obtained at a relatively low cost from marine brown algae, this hydrocolloid can also be used as a potential tool in the management of diabetes, not only as an insulin delivery agent but also due to its ability to improve insulin resistance, attenuate chronic inflammation and decrease oxidative stress. In addition, alginate has been recognized as a potential weight loss treatment, as alginate supplementation has been used as an adjunct treatment to energy restriction, to enhance satiety and improve weight loss in obese individuals. Thus, alginate holds the promise of an effective product used in the food industry as well as in the management of metabolic disorders such as diabetes and obesity. This review highlights recent research advances on the characteristics of alginate and brings to the forefront the beneficial aspects of using alginate, from the food industry to the biomedical field.

A review on polysaccharides from Artemisia sphaerocephala Krasch seeds, their extraction, modification, structure, and applications

Artemisia sphaerocephala Krasch (ASK) is an important member of Compositae (Asteraceae) family. Its seeds have been widely used as traditional medicine and to improve the quality of food. Water soluble and water insoluble polysaccharides are found in the seeds of this plant. Research has been conducted on the extraction of polysaccharides, their modification and determination of their structure. To date different techniques for extraction purposes have been applied which are reviewed here. Antioxidant, antidiabetic, anti-obesogenic, antitumor, and immunomodulatory activities have been explored using in vivo and in vitro methods. Moreover, these polysaccharides have been used as packaging material and as a sensing component for monitoring the freshness of packaged food. Some experimental results have shown that the quality of foods is also improved by using them as a food additive. We have also indicated some of the potential areas that are needed to be explored.

A review on structure, extraction, and biological activities of polysaccharides isolated from Cyclocarya paliurus (Batalin) Iljinskaja

Cyclocarya paliurus is essential and only living specie of the genus Cyclocarya Iljinskaja. The leaves of this plant have been extensively used as food in the form of tea and green vegetable. Many compounds have been isolated from this plant, and their useful aspects explored, including the polysaccharides. Studies conducted on leaves show that different methods of extraction have been used, as well as a combination of different techniques that have been applied to isolate polysaccharides from the leaves. Their structure has been elucidated because the activity of polysaccharides mainly depends upon their composition. It has been reported that different activities exhibited by the isolated crude, purified as well as modified polysaccharides include, anticancer, anti-inflammatory, antioxidant, antimicrobial, anti-hyperlipidemic and anti-diabetic activities. In some studies, a comparison of crude extract, as well as purified polysaccharide, has been performed. In this review, we have summarized all the available literature available on the methods of extraction, structure, and biological activities of polysaccharides from the leaves of C. paliurus and indicated the potential research areas that should be focused on future studies. We believe that this review will provide an up to date knowledge regarding polysaccharides of C. paliurus for the researchers.

Nanocarriers: more than tour de force for thymoquinone

Introduction: Thymoquinone (TQ), 2-isopropyl-5-methylbenzo-1, 4-quinone, the main active constituent of Nigella sativa (NS) plant, has been proven to be of great therapeutic aid in various in vitro and in vivo conditions. Despite the promising therapeutic activities of TQ, this molecule is not yet in the clinical trials, restricted by its poor biopharmaceutical properties including photo-instability.Area covered: This review compiles the different types of polymeric and lipidic nanocarriers (NCs), encapsulating TQ for their improved oral bioavailability, and augmented in vitro and in vivo efficacy, evidenced on various pathologies. Furthermore, we provide a comprehensive overview of TQ in relation to its encapsulation approaches advancing the delivery and improving the efficacy of TQ.Expert opinion: TQ was first identified in the essential oil of Nigella sativa L. black seed. TQ has not been used in formulations because it is a highly hydrophobic drug having poor aqueous solubility. To deal with the poor physicochemical problems associated with TQ, various NCs encapsulating TQ have been tried in the past. Nevertheless, these NCs could be impending in bringing forth this potential molecule to clinical reality. This will also be beneficial for a large research community including pharmaceutical & biological sciences and translational researchers.

Development of an emulgel for the treatment of rosacea using quality by design approach

Objective: The aim of this study was to develop an emulgel for the treatment of rosacea, applying quality by design (QbD).Methods: An emulgel designed to release the active pharmaceutical ingredients (APIs), metronidazole and niacinamide, via an emollient formulation that favors residence time and attenuates facial redness would be an excellent vehicle to develop to treat rosacea. It was decided to design first a vehicle presenting the attributes established in the quality target product profile, and then, after selecting the best formulation, to load the APIs in it to optimize the final emulgel. A design of experiments was introduced to study the effect of formulation variables on quality attributes (adhesion, phase separation by mechanical stress and viscosity) of the emulgels. Response surface methodology and desirability functions were applied for data analysis. After optimization, the final emulgel was further characterized by assay and in vitro release of APIs, attenuation of facial redness, and compared to commercially available metronidazole products regarding API release.Results: The final emulgel gradually released both APIs, reaching approximately 88% within the first 4 h, and their profiles were well described by the Higuchi model. Only a light attenuation effect to conceal facial redness was achieved.Conclusions: A metronidazole and niacinamide emulgel, also providing cosmetic assistance, was developed using QbD. The emulgel releases metronidazole faster than the creams, but more gradually than the commercially available gel, providing a realistic time frame of drug delivery in accordance with the expected time of residence of the adhesive emulgel over the affected facial area.

Gastrodia elata Blume Polysaccharides: A Review of Their Acquisition, Analysis, Modification, and Pharmacological Activities

Gastrodia elata Blume (G. elata) is a valuable Traditional Chinese Medicine (TCM) with a wide range of clinical applications. G. elata polysaccharides, as one of the main active ingredients of G. elata, have interesting extraction, purification, qualitative analysis, quantitative analysis, derivatization, and pharmacological activity aspects, yet a review of G. elata polysaccharides has not yet been published. Based on this, this article summarizes the progress of G. elata polysaccharides in terms of the above aspects to provide a basis for their further research and development.

New Approach in Ulcer Prevention and Wound Healing Treatment using Doxycycline and Amoxicillin/LDH Nanocomposites

Doxycycline (DOX) and amoxicillin (AMOX) are important Broad-spectrum antibiotics used in treating multiple human and animal diseases. For the sake of exploring novel medical applications, both antibiotics were loaded into magnesium aluminium layer double hydroxide (Mg-Al)/LDH nanocomposite through the co-precipitation method. The synthesized materials were characterized by XRD, FT-IR, particle size analysis, FESEM and HRTEM. Acute toxicological studies were conducted using median lethal dose LD50, where a total number of 98 rats (200-150 gm) of both sexes were used. An experimental wound was aseptically incised on the anterior-dorsal side of each rat, while 98% of pure medical ethanol was used for ulcer induction. Acute toxicity, wound closure rate, healing percentages, ulcer index, protective rate and histopathological studies were investigated. Antibiotic Nanocomposites has significantly prevented ulcer formation and improved wound healing process to take shorter time than that of the typical processes, when compared with that of same drugs in microscale systems or commercial standard drugs. These results were confirmed by the histopathological findings. By converting it into the Nanoform, which is extremely important, especially with commonly used antibiotics, novel pharmacological properties were acquired from the antibiotics. The safe uses of DOX/LDH and AMOX/LDH Nanocomposites in this study were approved for biomedical applications.

Potential of chitosan-based carrier for periodontal drug delivery

Periodontal diseases are chronic infectious diseases and are a major oral health burden. With the progress in the understanding of etiology, epidemiology and pathogenesis of periodontal diseases coupled with the understanding of the polymicrobial synergy in the dysbiotic oral microbial flora, several new therapeutic targets have been identified. The strategies to curb bacterial growth and production of factors that gradually destroy the tissue surrounding and supporting the teeth have been the cornerstone for inhibiting periodontitis. Systemic administration of antibiotics for the treatment of periodontitis have shown several drawbacks including: inadequate antibiotic concentration at the site of the periodontal pocket, a rapid decline of the plasma antibiotic concentration to sub-therapeutic levels, the development of microbial resistance due to sub-therapeutic drug levels and peak-plasma antibiotic concentrations which may be associated with various side effects. These obvious disadvantages have evoked an interest in the development of localized drug delivery systems that can provide an effective concentration of antibiotic at the periodontal site for the duration of the treatment with minimal side effects. A targeted sustained release device which could be inserted in the periodontal pocket and prolong the therapeutic levels at the site of action at a much lower dose is the need of the hour. Chitosan, a deacetylated derivative of chitin has attracted considerable attention owing to its special properties including antimicrobial efficacy, biodegradability, biocompatibility and non-toxicity. It also has the propensity to act as hydrating agent and display tissue healing and osteoinducting effect. The aim of this review is to shine a spotlight on the chitosan based devices developed for drug delivery application in the effective treatment of various periodontal disorders. The chitosan based carriers like fibers, films, sponge, microparticles, nanoparticles, gels that have been designed for sustained release of drug into the periodontal pocket are highlighted.

Preparation and evaluation of tilmicosin microspheres and lung-targeting studies in rabbits

Tilmicosin (TMS) is a macrolide used extensively for pulmonary infections in clinical veterinary medicine. However, TMS has frequent administration and short elimination half-life. Therefore, tilmicosin-gelatine microspheres (TMS-GMS) were prepared by an emulsion-chemical cross-linking technique as a sustained-release formulation to extend drug half-life. The particle size distribution, in-vitro sustained-release properties, stability, and physical characteristics, as well as pharmacokinetic (PK) characteristics, were evaluated in rabbits. TMS-GMS were spherical in shape and had a mean diameter of 11.34±1.20μm; 95.65% of the microspheres varied in size from 5.0 to 25.0μm. Light and thermal stability tests indicated no significant changes in all observed indices. Importantly, compared to crude TMS, slower release of TMS from TMS-GMS was noted in drug release studies (in vitro). Pharmacokinetic (PK) characteristics were examined in the lung, liver, heart, kidney and muscle tissue of rabbits following IM injection of TMS-GMS or TMS-injection at a dose of 10mg/kg. The elimination half-life of TMS-GMS (59.21±0.21h) was longer than that of TMS-injection (38.56±0.13h) in the lung. The ratio of peak concentration (C_e) of TMS-GMS to TMS-injection was 2.19 (>1) in the lung, demonstrating the selectivity of TMS-GMS to target the lung compared to that of other tissues (C_e<1). Interestingly, the uptake value of TMS from TMS-GMS was 8.48 times higher in the lung than that for the TMS-injection, and was slightly higher than in the liver (1.85), heart (1.72), kidney (2.44) and muscle (2.79) tissues. TMS-GMS is a sustained-release formulation of TMS with potential to be used in veterinary clinical applications; possible benefits include lung-targeting and prolonged elimination half-life.

Study on microwave assisted extraction of chrysophanol and its intervention in biofilm formation of Streptococcus suis

A microwave assisted extraction technology was used to extract chrysophanol from rhubarb. The present study will focus on the optimum extraction conditions of chrysophanol and discuss the inhibitory effect of chrysophanol on the biofilm formation of Streptococcus suis (S. suis). A Box–Behnken design based on single-factor experiments was applied to optimize the microwave assisted extraction process and to study the factors' relationships with each other. The results showed that a microwave temperature of 56 °C, ethanol concentration of 70%, microwave power of 540 W and liquid to raw material ratio of 55 mL g⁻¹ were the optimal conditions for the microwave method. The yield of chrysophanol was 2.54 ± 0.07% under the optimal conditions, which was in agreement with the predicted value (2.64%). Then, the chemical structure of the extracted chrysophanol was identified by LC-MS. In addition, in vitro experiments showed that chrysophanol has an inhibitory effect on S. suis (minimum inhibitory concentration was 1.98 μg mL⁻¹) and was shown to significantly inhibit the capability of S. suis to form a biofilm using crystal violet staining. Finally, scanning electron microscopy analysis showed that the three-dimensional structure of the biofilm deposited by the S. suis community was destroyed by chrysophanol.

A microwave assisted extraction technology was used to extract chrysophanol from rhubarb.

Inhibitory effects of Lepidium sativum polysaccharide extracts on TNF-α production in Escherichia coli-stimulated mouse

The present study was designed to study the quantitative effects of extraction time, temperature and solvent to sample ratio on the yield of Lepidium sativum polysaccharides (LSP) using a Box-Behnken design. The activities of the optimized LSP extract were then tested in an in vivo experimental system of Escherichia coli (E. coli)-induced endotoxin shock. The optimal polysaccharide extraction conditions were established by the equation of regression and evaluation of the response surface contour plots: extraction time 5.2 h; temperature 95 °C and ratio of water to raw material 31.89 mL/g. Subsequently, an in vivo endotoxin shock was induced in mice with a single E. coli i.p. injection. Septic mice showed a substantial raise in the levels of tumor necrosis factor alpha (TNF-α) in plasma, whereas mice treated with LSP after E. coli injection showed considerable lower plasma levels of TNF-α (P < 0.05). These results suggest that LSP have beneficial effects when administered to mice with endotoxin shock by diminishing the pro-inflammatory response. The systemic activity of LSP indicated that the extract has a significant inhibitory effect against E. coli-induced inflammation by reducing the circulating levels of TNF-α. Further studies are warranted to explore the clinical implications of such observations.

Multiparticulate based thermosensitive intra-pocket forming implants for better treatment of bacterial infections in periodontitis

Considering alarming projections in the prevalence of periodontitis, following study was undertaken to develop chitosan-vanillin crosslinked microspheres loaded in-situ gel (MLIG) implants containing ornidazole and doxycycline hyclate for the treatment of pocket infections. Firstly, microspheres were formulated and optimized using response surface methodology for particle size <50 μm, entrapment efficiency >80%, in-vitro drug release (T_80%) >7 days and acceptable mucoadhesion. Further, MLIG were optimized for gelation temperature of 34-37 °C and viscosity <1000 cps respectively. FTIR, DSC and XRD graphs disclosed compatibility and alterations in crystallinity of drugs. In-vitro dissolution study demonstrated non-Fickian type of drug release mechanism for twelve days. Stability studies ascertained MLIG implants were sterilizable and stable for about 11.29 months on refrigeration. The formulations exhibited significant (p < 0.001) antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Enterococcus faecalis, and were found biocompatible and biodegradable during preclinical studies. Ligature-induced periodontal rat model, corroborated significant growth (p < 0.05) of gingival tissue after two weeks. Clinical trials revealed, intra-pocket administration of MLIG along with SRP provided significant reduction in clinical parameters as compared to SRP alone. Conclusively, antimicrobials incorporated thermosensitive, biodegradable, mucoadhesive and syringeable MLIG implants appeared as better option for the treatment of periodontitis.

Design, optimization and characterizations of chitosan fortified calcium alginate microspheres for the controlled delivery of dual drugs

Periodontal disease is chronic, highly prevalent infectious disease that requires prolonged and controlled delivery of antimicrobial agents into pockets. To achieve this objective, dual antimicrobials encapsulated chitosan fortified calcium alginate (CS-Ca-SA) microspheres were formulated by application of Plackett-Burman factorial design. The microspheres were optimized for particle size (PS), entrapment efficiency (EE) and drug release. The optimized microspheres presented average PS of 74-461 µm and EE of 62.45-86.20% with controlled drug delivery for 120 hours. FTIR disclosed successful complexation between SA and CS. DSC and XRD studies showed changes in the crystallinity of drugs in microspheres. Shape factor and SEM demonstrated spherical to pear-shaped microspheres. Release exponent >0.43 and high diffusion coefficients revealed non-Fickian-based diffusion-limited drug release. CS-Ca-SA microspheres exhibited surface pH of 6.5 ± 0.5, moderate swelling, less erosion and improved mucoadhesion over Ca-SA microspheres. Also, significant antimicrobial activity against Escherichia coli and Staphylococcus aureus and cytocompatibility with L929 cell lines were observed. Further, microspheres exhibited long-term stability on refrigeration. The outcomes of study supported the potential of dual polymer and dual drug-based biodegradable, stable, non-toxic, mucoadhesive, controlled and prolonged drug release microspheres as more patient compliant by administration into periodontal pockets for the management of periodontal disease.

Development of Eudragit RS 100 Microparticles Loaded with Ropinirole: Optimization and In Vitro Evaluation Studies

The current study aimed to develop novel pH independent microparticles loaded with ropinirole (ROP) for sustained drug release. Eudragit RS 100 was used as release retardant and microparticles were fabricated by oil-in-oil emulsion solvent evaporation method. A three-factor three-level Box-Behnken design using Design-Expert software was employed to optimize formulation variables. Ropinirole loaded microparticles were evaluated with respect to morphology, particle size, encapsulation efficiency, and in vitro release profile. Optical microscopy and SEM micrographs indicated spherical shape with smooth surface and well-defined boundary. The particle size was in the range of 98.86 to 236.29 μm, being significantly increased with increasing polymer concentration. Higher polymer load also increased the thickness of internal polymer network, which led to reduced drug loss and higher entrapment efficiency (89%). The cumulative in vitro release was found to be in the range of 54.96 to 99.36% during the release studies (12 h) following zero order release kinetics and non-Fickian diffusion pattern. The developed microparticles have the potential to sustain the release of ropinirole, which may lead to a reduction in its adverse effects and improved management of Parkinson's disease.

Preparation and evaluation of cefquinome-loaded gelatin microspheres and the pharmacokinetics in pigs

Cefquinome (CEF) is widely used for veterinary clinical applications because of its broad spectrum and high efficiency. However, frequent administrations are required due to its short elimination half-life. In this study, cefquinome sulfate gelatin microspheres (CEF-GMS) were prepared as a sustained-release formulation using emulsion chemical cross-linking technique. Physical properties, stability, sustained-release property in vitro, and pharmacokinetics in pigs were assessed. The morphology of CEF-GMS showed a good sphericity with porous structure on the surface, and the mean diameter was 8.80 ± 0.78 μm, with 90.60 ± 3.98% of the total in the range of 5-20 μm. There were no significant changes of all estimated indexes in the stability tests. In vitro drug release study showed that the release of CEF from CEF-GMS was much slower than that from crude CEF in a release medium. Pharmacokinetic characteristics were evaluated following intramuscular administration of CEF-GMS or Cefquinome sulfate injection (CEF-Inj) in pigs at a dosage of 4 mg CEF/kg body weight. The plasma drug concentration-time data of CEF-GMS and CEF-Inj were both best fitted by two-compartment models with first-order absorption, and the elimination half-life of CEF-GMS was almost 10 times that of CEF-Inj. Overall, CEF-GMS might be used as a sustained-release formulation of CEF for veterinary clinical applications.

Polysaccharides from Traditional Chinese Medicines: Extraction, Purification, Modification, and Biological Activity

Traditional Chinese Medicine (TCM) has been used to treat diseases in China for thousands of years. TCM compositions are complex, using as their various sources plants, animals, fungi, and minerals. Polysaccharides are one of the active and important ingredients of TCMs. Polysaccharides from TCMs exhibit a wide range of biological activities in terms of immunity- modifying, antiviral, anti-inflammatory, anti-oxidative, and anti-tumor properties. With their widespread biological activities, polysaccharides consistently attract scientist's interests, and the studies often concentrate on the extraction, purification, and biological activity of TCM polysaccharides. Currently, numerous studies have shown that the modification of polysaccharides can heighten or change the biological activities, which is a new angle of polysaccharide research. This review highlights the current knowledge of TCM polysaccharides, including their extraction, purification, modification, and biological activity, which will hopefully provide profound insights facilitating further research and development.

Thiolated alginate-based multiple layer mucoadhesive films of metformin forintra-pocket local delivery: in vitro characterization and clinical assessment

INTRODUCTION

Periodontal disease broadly defines group of conditions in which the supportive structure of the tooth (periodontium) is destroyed. Recent studies suggested that the anti-diabetic drug metformin hydrochloride (MF) has an osteogenic effect and is beneficial for the management of periodontitis.

OBJECTIVE

Development of strong mucoadhesive multiple layer film loading small dose of MF for intra-pocket application.

METHODOLOGY

Multiple layer film was developed by double casting followed by compression method. Either 6% carboxy methyl cellulose sodium (CMC) or sodium alginate (ALG) constituted the inner drug (0.6%) loaded layer. Thiolated sodium alginate (TSA; 2 or 4%) constituted the outer drug free layers to enhance mucoadhesion and achieve controlled drug release. Optimized formulation was assessed clinically on 20 subjects.

RESULTS

Films were uniform, thin and hard enough for easy insertion into periodontal pockets. Based on water uptake and in vitro drug release, CMC based film with 4% TSA as an outer layer was the optimized formulation with enhanced mucoadhesion and controlled drug release (83.73% over 12 h). SEM showed the effective fabrication of the triple layer film in which connective lines between the layers could be observed. FTIR examination suggests possibility of hydrogen bonding between the -NH groups of metformin and -OH groups of CMC. DSC revealed the presence of MF mainly in the amorphous form. Clinical results indicated improvement of all clinical parameters six months post treatment.

CONCLUSION

The results suggested that local application of the mucoadhesive multiple layer films loaded with metformin hydrochloride was able to manage moderate chronic periodontitis.

In vitro/in vivo evaluation of HPMC/alginate based extended-release matrix tablets of cefpodoxime proxetil

The purpose of this research was to assessment of antimicrobial activity and in vitro/in vivo evaluation of cefpodoxime proxetil extended-release (ER) tablet for once daily administration. The tablets were prepared using combination of biodegradable polysaccharides including hydroxypropyl methylcellulose and sodium alginate as matrix material to achieve pH-independent ER release. The tablets were found within the permissible limits for various physicochemical parameters. The in vitro drug release showed that the drug was released over a period of 24h in a sustained release manner. The drug release followed Higuchi kinetics as these plots showed the highest linearity (R(2)=0.9833), but a close relationship was also observed with zero-order kinetics (R(2)=0.9088) and the drug release mechanism was found to be of anomalous or non-Fickian type. Further, in vitro drug release was assessed by antimicrobial assay and it revealed that drug release through 24h periods was above the MIC. In vivo investigation in rabbits showed ER pharmacokinetic profile of cefpodoxime from the matrix tablets. A good correlation of drug absorption in vivo and drug release in vitro (R(2)=0.9785) was observed. These results suggested that the investigated CFP matrix tablets have a potential for extended-release dosage forms.

Optimal Extraction of Gallic Acid fromSuaeda glaucaBge. Leaves and Enhanced Efficiency by Ionic Liquids

The ultrasound-assisted extraction (UAE) was initially applied to extract gallic acid fromSuaeda glaucaBge. using 70% ethanol as extraction solvent. Temperature, liquid-solid ratio, and extraction time were optimized by response surface methodology (RSM), obtaining maximum levels of gallic acid (6.30 mg·g−1) at 51°C, 19.52 mL·g−1, and 42.68 min, respectively. The obtained model was statistically significant (p<0.0001). The verification experiments at the optimum conditions yielded gallic acid for 6.21 mg·g−1. Subsequently, under optimal conditions, four ionic liquids were used to extract gallic acid fromSuaeda glaucaBge. The results indicated that the presence of 1-hexyl-3-methylimidazolium chloride allowed increasing the EE of gallic acid up to 8.90 mg·g−1. This might be interpreted in terms of the molecular interaction between ionic liquid and gallic acid. The use of ionic liquids involves a stronger gallic acid extraction capacity than conventional organic volatile solvents. A promising alternative process is proposed for the extraction of gallic acid ofSuaeda glaucaBge.

Extraction Optimization, Characterization and Bioactivities of a Major Polysaccharide from Sargassum thunbergii

Sargassum thunbergii is a kind of natural edible algae. STP (S. thunbergii polysaccharides) was considered as the main bioactive compounds in S. thunbergii. To obtain the optimal processing conditions for maximum total sugar yield, single factor investigation and response surface methodology (RSM) were employed. The optimal processing conditions were as follows: liquid to solid ratio 120 mL/g, extraction time 210 min, extraction temperature 97°C. The experimental yield 7.53% under optimized conditions was closely agreed with the predicted yield 7.85% of the model. The major polysaccharide fraction from S. thunbergii (named STP-II) was purified by DEAE-Sepharose CL-6B column chromatography. High-performance size-exclusion chromatography (HPSEC), gas chromatography (GC) and high-performance liquid chromatography (HPLC) were used to identify its characterizations, and in vitro antioxidant assays and cytotoxicity assays were used to research its bioactivities. The purified fraction STP-II (63.75%) was a single peak in HPSEC with Sugar KS-804 column, had a molecular weight of 550KD, and comprised mainly of fucose, xylose, galactose, glucose and glucuronic acid. STP-II had higher scavenging activities on hydroxyl radical (76.72% at 0.7 mg/mL) and superoxide radical (95.17% at 2 mg/mL) than Vitamin C (Vc). STP-II also exhibited the capability of anti-proliferation in Caco-2 cells. STP-II possessed good antioxidant and inhibitory activity against human colon cancer Caco-2 cells in vitro and could be explored as novel natural functional food.

Tetracycline-Containing MCM-41 Mesoporous Silica Nanoparticles for the Treatment of Escherichia coli

Tetracycline (TC) is a well-known broad spectrum antibiotic, which is effective against many Gram positive and Gram negative bacteria. Controlled release nanoparticle formulations of TC have been reported, and could be beneficial for application in the treatment of periodontitis and dental bone infections. Furthermore, TC-controlled transcriptional regulation systems (Tet-on and Tet-off) are useful for controlling transgene expression in vitro and in vivo for biomedical research purposes; controlled TC release systems could be useful here, as well. Mesoporous silica nanomaterials (MSNs) are widely studied for drug delivery applications; Mobile crystalline material 41 (MCM-41), a type of MSN, has a mesoporous structure with pores forming channels in a hexagonal fashion. We prepared 41 ± 4 and 406 ± 55 nm MCM-41 mesoporous silica nanoparticles with loaded TC for controlled drug release; TC content in the TC-MCM-41 nanoparticles was 18.7% and 17.7% w/w, respectively. Release of TC from TC-MCM-41 nanoparticles was then measured in phosphate-buffered saline (PBS), pH 7.2, at 37 °C over a period of 5 h. Most antibiotic was released from both over this observation period; however, the majority of TC was released over the first hour. Efficacy of the TC-MCM-41 nanoparticles was then shown to be superior to free TC against Escherichia coli (E. coli) in culture over a 24 h period, while blank nanoparticles had no effect.

Optimization, in vitro cytotoxicity and penetration capability of deformable nanovesicles of paclitaxel for dermal chemotherapy in Kaposi sarcoma

Although much research has been published on ways to overcome the low oral bioavailability of paclitaxel, exploration of novel drug delivery systems that can target paclitaxel deep in to the dermal areas in AIDS-related Kaposi sarcoma (KS) have not yet been reported. Our aim was to develop deformable nanovesicles of paclitaxel capable of being used in dermal chemotherapy, especially deep into the dermal areas of AIDS related KS. Deformable nanovesicular formulations (TS1-TS15) composed of soya lecithin and span80 were prepared by the rotary evaporation sonication method within the constraints of our Box-Behnken design. The formulations were subjected to vesicle characterization and ex vivo permeation. The optimized vesicular suspension was formulated as a gel and assessed for in vitro cytotoxicity and penetration characteristics by confocal laser scanning microscopy (CLSM). TS9 with vesicle size characteristics of 185.76 ± 2.15 nm, zeta potential of -23.2 mV, deformability index = 138.02 and cumulative drug permeation of 89.80 ± 1.84% was identified as the optimized formulation. TEM revealed spherical vesicles with firm boundaries that were stable at 4 °C. TS9 was developed as carbopol 934P gel (TG) and compared with the control gel (CG) made with the pure drug (paclitaxel). TG showed significantly higher (p < 0.05) in vitro drug permeation and flux compared to the CG. In vitro cytotoxicity study on KSY-1 cell lines revealed higher IC50 (≤17) for TS against IC50 ≤19 for TG. CLSM confirmed the penetrating potential of transfersomes via TG to the dermal layers of skin, the proposed target site. Conclusively, deformable nonovesicles of paclitaxel appear as a feasible alternative to the conventional formulations of paclitaxel in the management of AIDS-related KS.

Controlled release of dutasteride from biodegradable microspheres: in vitro and in vivo studies

The aim of the present work was to study the in vitro/in vivo characteristics of dutasteride loaded biodegradable microspheres designed for sustained release of dutasteride over four weeks. An O/W emulsion-solvent evaporation method was used to incorporate dutasteride, which is of interest in the treatment of benign prostatic hyperplasia (BPH), into poly(lactide-co-glycolide) (PLGA). A response surface method (RSM) with central composite design (CCD) was employed to optimize the formulation variables. A prolonged in vitro drug release profile was observed, with a complete release of the entrapped drug within 28 days. The pharmacokinetics study showed sustained plasma drug concentration-time profile of dutasteride loaded microspheres after subcutaneous injection into rats. The in vitro drug release in rats correlated well with the in vivo pharmacokinetics profile. The pharmacodynamics evaluated by determination of the BPH inhibition in the rat models also showed a prolonged pharmacological response. These results suggest the potential use of dutasteride loaded biodegradable microspheres for the management of BPH over long periods.

Nanoengineered drug delivery systems for enhancing antibiotic therapy

Formulation scientists are recognizing nanoengineered drug delivery systems as an effective strategy to overcome limitations associated with antibiotic drug therapy. Antibiotics encapsulated into nanodelivery systems will contribute to improved management of patients with various infectious diseases and to overcoming the serious global burden of antibiotic resistance. An extensive review of several antibiotic-loaded nanocarriers that have been formulated to target drugs to infectious sites, achieve controlled drug release profiles, and address formulation challenges, such as low-drug entrapment efficiencies, poor solubility and stability is presented in this paper. The physicochemical properties and the in vitro/in vivo performances of various antibiotic-loaded delivery systems, such as polymeric nanoparticles, micelles, dendrimers, liposomes, solid lipid nanoparticles, lipid-polymer hybrid nanoparticles, nanohybirds, nanofibers/scaffolds, nanosheets, nanoplexes, and nanotubes/horn/rods and nanoemulsions, are highlighted and evaluated. Future studies that will be essential to optimize formulation and commercialization of these antibiotic-loaded nanosystems are also identified. The review presented emphasizes the significant formulation progress achieved and potential that novel nanoengineered antibiotic drug delivery systems have for enhancing the treatment of patients with a range of infections.