Biocompatible gemcitabine-based nanomedicine engineered by Flow Focusing for efficient antitumor activity

Venlafaxine-PLGA nanoparticles provide a fast onset of action in an animal model of depression via nose-to-brain

BACKGROUND

Current treatment of depression is hindered by the delayed onset of the action of antidepressant drugs, often resulting in treatment failure. Therefore, new therapeutic solutions are imperative.

METHODOLOGY

Venlafaxine-loaded poly(lactic-co-glycolic acid) nanoparticles were produced by a double emulsion-solvent evaporation method. Cellular safety assessment and internalization assays were carried out in vitro in human olfactory neuroepithelium cells. The antidepressant effect of intranasal (nose-to-brain) nanoparticle administration was assessed in animals submitted to an animal model of depression by behavioral tests, including open-field, sucrose preference test and tail suspension test.

RESULTS

The drug entrapment efficiency (55-65 %), particle size (190-210 nm), polydispersity index (<0.2), and zeta potential (-20 mV) of Venlafaxine-loaded poly(lactic-co-glycolic acid) nanoparticles were determined to be adequate. Nanoparticles did not show cytotoxic effects. Cell viability was more than 90 % for all formulations and concentrations assayed. The results of the quantitative and qualitative cell uptake assays were consistent, showing an evident internalization of the nanoparticles into the cells. Furthermore, venlafaxine-loaded nanoparticles administered for just 7 days were able to reverse the phenotype induced by a depressive-like model, showing a significant antidepressant-like effect compared to those treated with free venlafaxine.

CONCLUSIONS

These findings indicated that intranasal venlafaxine-loaded poly(lactic-coglycolic acid) nanoparticles could become a viable technique for improving venlafaxine brain uptake via nose-to-brain. It could also be a promising nanoplatform for enhancing the treatment of depression.

Gelatin nanocarriers in oncology: A biocompatible strategy for targeted drug delivery

Cancer persists as a formidable global health crisis, with conventional therapies often compromised by systemic toxicity, poor tumor specificity, and therapeutic resistance. Nanotechnology has emerged as a transformative approach, leveraging nanoscale materials to enhance drug bioavailability, enable targeted delivery, and mitigate off-target effects. Among these innovations, gelatin-based nanoparticles (GNPs), derived from collagen and endorsed by the FDA have garnered significant attention as biocompatible, biodegradable nanocarriers uniquely suited for oncology applications. GNPs address critical extracellular barriers such as inefficient tumor penetration, rapid clearance, and nonspecific biodistribution by capitalizing on gelatin's intrinsic advantages: low immunogenicity, tumor microenvironment responsiveness (pH, enzymes, redox gradients), and tunable surface functionalization. This review highlights the versatility of GNPs in overcoming these challenges through advanced strategies like ligand-mediated targeting, combinatorial therapies, and size-transformable systems that enhance tumor accumulation and therapeutic precision. Case studies across lung, breast, skin, liver, colorectal, brain, and head/neck cancers demonstrate GNPs' ability to reduce IC50 values by 2 to 4-fold, achieve >90 % apoptosis in malignant cells, and minimize damage to healthy tissues. Despite the challenges in translating gelatin-based nanocarriers from preclinical studies to clinical applications in cancer therapy, their promising preclinical performance highlights their potential as patient-centric platforms capable of advancing precision oncology. Further their adaptability, multifunctionality, and capacity for stimuli-responsive drug release underscore their potential to improve clinical outcomes, offering a targeted, low-toxicity paradigm for managing diverse malignancies.

From Basic to Breakthroughs: The Journey of Microfluidic Devices in Hydrogel Droplet Generation

Hydrogel particles are essential in biological applications because of their distinctive capacity to retain water and encapsulate active molecules within their three-dimensional structure. Typical particle sizes range from nanometers (10-500 nm) to micrometers (1-500 µm), depending on the specific application and method of preparation. These characteristics render them optimal carriers for the administration of active compounds, facilitating the regulated and prolonged release of pharmaceuticals, including anticancer agents, antibiotics, and therapeutic proteins. Hydrogel particles can exhibit various morphologies, including spherical, rod-shaped, disk-shaped, and core-shell structures. Each shape offers distinct advantages, such as improved circulation time, targeted drug delivery, or enhanced cellular uptake. Additionally, hydrogel particles can be engineered to respond to various stimuli, such as temperature, pH, light, magnetic fields, and biochemical signals. Furthermore, their biocompatibility and capacity to acclimate to many biological conditions make them appropriate for sophisticated applications, including gene treatments, tissue regeneration, and cell therapies. Microfluidics has transformed the creation of hydrogel particles, providing precise control over their dimensions, morphology, and stability. This technique facilitates reproducible and highly efficient production, reducing reagent waste and optimizing drug encapsulation. The integration of microfluidics with hydrogels provides opportunities for the advancement of creative and effective solutions in contemporary medicine.

Microfluidic nanoprecipitation of PEGylated PLGA nanoparticles with rapamycin and performance evaluation

Rapamycin (RAP) is currently being developed as potential antibreast cancer drug. However, its poor solubility completely limits its use. The aim of this study was to develop polyethylene glycol-poly(lactide-co-glycolide) (PEG-PLGA)-based nanoparticles (NPs) to load RAP via microfluidics with an appropriate polyethylene glycol (PEG) content to enhance the bioavailability of RAP. Polydimethylsiloxane (PDMS) chips with a Y-shaped channel were designed to obtain RAP-loaded PEG-PLGA NPs (RAP-PEG-PLGA). The entrapment efficiency (EE) and drug loading (DL) as well as release profile of RAP-PEG-PLGA were evaluated, and their resistance to plasma albumin adsorption of NPs with different PEG contents was evaluated and compared. RAW264.7 and 4T1 cells were used to assess the antiphagocytic and anticancer cells effect of NPs, respectively. RAP-PEG-PLGA of around 124 nm in size were successfully prepared with the EE of 82.0% and DL of 12.3%, and sustained release for around 40 d. A PEG relative content of 10% within the PEG-PLGA molecule was shown superior in resisting protein adsorption. RAP-PEG-PLGA inhibited the growth of breast cancer cells when the concentration was over 10 μg/mL, and the inhibition efficiency was significantly higher than free RAP. Hence, the current RAP-PEG-PLGA could be a potential therapeutic system for breast cancer treatment.

Navigating the future: Microfluidics charting new routes in drug delivery

Microfluidics has emerged as a transformative force in the field of drug delivery, offering innovative avenues to produce a diverse range of nano drug delivery systems. Thanks to its precise manipulation of small fluid volumes and its exceptional command over the physicochemical characteristics of nanoparticles, this technology is notably able to enhance the pharmacokinetics of drugs. It has initiated a revolutionary phase in the domain of drug delivery, presenting a multitude of compelling advantages when it comes to developing nanocarriers tailored for the delivery of poorly soluble medications. These advantages represent a substantial departure from conventional drug delivery methodologies, marking a paradigm shift in pharmaceutical research and development. Furthermore, microfluidic platformsmay be strategically devised to facilitate targeted drug delivery with the objective of enhancing the localized bioavailability of pharmaceutical substances. In this paper, we have comprehensively investigated a range of significant microfluidic techniques used in the production of nanoscale drug delivery systems. This comprehensive review can serve as a valuable reference and offer insightful guidance for the development and optimization of numerous microfluidics-fabricated nanocarriers.

Advanced manufacturing of nanoparticle formulations of drugs and biologics using microfluidics

Numerous innovative nanoparticle formulations of drugs and biologics, named nano-formulations, have been developed in the last two decades. However, methods for their scaled-up production are still lagging, as the amount needed for large animal tests and clinical trials is typically orders of magnitude larger. This manufacturing challenge poses a critical barrier to successfully translating various nano-formulations. This review focuses on how microfluidics technology has become a powerful tool to overcome this challenge by synthesizing various nano-formulations with improved particle properties and product purity in large quantities. This microfluidic-based manufacturing is enabled by microfluidic mixing, which is capable of the precise and continuous control of the synthesis of nano-formulations. We further discuss the specific applications of hydrodynamic flow focusing, a staggered herringbone micromixer, a T-junction mixer, a micro-droplet generator, and a glass capillary on various types of nano-formulations of polymeric, lipid, inorganic, and nanocrystals. Various separation and purification microfluidic methods to enhance the product purity are reviewed, including acoustofluidics, hydrodynamics, and dielectrophoresis. We further discuss the challenges of microfluidics being used by broader research and industrial communities. We also provide future outlooks of its enormous potential as a decentralized approach for manufacturing nano-formulations.

Microfluidics for nano-drug delivery systems: From fundamentals to industrialization

In recent years, owing to the miniaturization of the fluidic environment, microfluidic technology offers unique opportunities for the implementation of nano drug delivery systems (NDDSs) production processes. Compared with traditional methods, microfluidics improves the controllability and uniformity of NDDSs. The fast mixing and laminar flow properties achieved in the microchannels can tune the physicochemical properties of NDDSs, including particle size, distribution and morphology, resulting in narrow particle size distribution and high drug-loading capacity. The success of lipid nanoparticles encapsulated mRNA vaccines against coronavirus disease 2019 by microfluidics also confirmed its feasibility for scaling up the preparation of NDDSs via parallelization or numbering-up. In this review, we provide a comprehensive summary of microfluidics-based NDDSs, including the fundamentals of microfluidics, microfluidic synthesis of NDDSs, and their industrialization. The challenges of microfluidics-based NDDSs in the current status and the prospects for future development are also discussed. We believe that this review will provide good guidance for microfluidics-based NDDSs.

Receptor-targeted nanoparticles modulate cannabinoid anticancer activity through delayed cell internalization

Δ9-tetrahydrocannabinol (Δ9-THC) is known for its antitumor activity and palliative effects. However, its unfavorable physicochemical and biopharmaceutical properties, including low bioavailability, psychotropic side effects and resistance mechanisms associated to dosing make mandatory the development of successful drug delivery systems. In this work, transferring (Tf) surface-modified Δ9-THC-loaded poly(lactide-co-glycolic) nanoparticles (Tf-THC-PLGA NPs) were proposed and evaluated as novel THC-based anticancer therapy. Furthermore, in order to assess the interaction of both the nanocarrier and the loaded drug with cancer cells, a double-fluorescent strategy was applied, including the chemical conjugation of a dye to the nanoparticle polymer along with the encapsulation of either a lipophilic or a hydrophilic dye. Tf-THC PLGA NPs exerted a cell viability decreased down to 17% vs. 88% of plain nanoparticles, while their internalization was significantly slower than plain nanoparticles. Uptake studies in the presence of inhibitors indicated that the nanoparticles were internalized through cholesterol-associated and clathrin-mediated mechanisms. Overall, Tf-modification of PLGA NPs showed to be a highly promising approach for Δ9-THC-based antitumor therapies, potentially maximizing the amount of drug released in a sustained manner at the surface of cells bearing cannabinoid receptors.

Microfluidic formulation of nanoparticles for biomedical applications

Nanomedicine has made significant advances in clinical applications since the late-20th century, in part due to its distinct advantages in biocompatibility, potency, and novel therapeutic applications. Many nanoparticle (NP) therapies have been approved for clinical use, including as imaging agents or as platforms for drug delivery and gene therapy. However, there are remaining challenges that hinder translation, such as non-scalable production methods and the inefficiency of current NP formulations in delivering their cargo to their target. To address challenges with existing formulation methods that have batch-to-batch variability and produce particles with high dispersity, microfluidics-devices that manipulate fluids on a micrometer scale-have demonstrated enormous potential to generate reproducible NP formulations for therapeutic, diagnostic, and preventative applications. Microfluidic-generated NP formulations have been shown to have enhanced properties for biomedical applications by formulating NPs with more controlled physical properties than is possible with bulk techniques-such as size, size distribution, and loading efficiency. In this review, we highlight advances in microfluidic technologies for the formulation of NPs, with an emphasis on lipid-based NPs, polymeric NPs, and inorganic NPs. We provide a summary of microfluidic devices used for NP formulation with their advantages and respective challenges. Additionally, we provide our analysis for future outlooks in the field of NP formulation and microfluidics, with emerging topics of production scale-independent formulations through device parallelization and multi-step reactions within droplets.

Gemcitabine-Loaded Magnetically Responsive Poly(ε-caprolactone) Nanoparticles against Breast Cancer

A reproducible and efficient interfacial polymer disposition method has been used to formulate magnetite/poly(ε-caprolactone) (core/shell) nanoparticles (average size ≈ 125 nm, production performance ≈ 90%). To demonstrate that the iron oxide nuclei were satisfactorily embedded within the polymeric solid matrix, a complete analysis of these nanocomposites by, e.g., electron microscopy visualizations, energy dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, electrophoresis, and contact angle goniometry was conducted. The magnetic responsive behaviour of these nanoparticles was quantitatively characterized by the hysteresis cycle and qualitatively investigated by visualization of the colloid under exposure to a 0.4 T magnet. Gemcitabine entrapment into the polymeric shell reported adequate drug loading values (≈11%), and a biphasic and pH-responsive drug release profile (≈ four-fold faster Gemcitabine release at pH 5.0 compared to pH 7.4). Cytotoxicity studies in MCF-7 human breast cancer cells proved that the half maximal inhibitory concentration of Gem-loaded nanocomposites was ≈ two-fold less than that of the free drug. Therefore, these core/shell nanoparticles could have great possibilities as a magnetically targeted Gemcitabine delivery system for breast cancer treatment.

Antitumor activity of gemcitabine hydrochloride loaded lipid polymer hybrid nanoparticles (LPHNs): In vitro and in vivo

The present study demonstrated the application of gemcitabine hydrochloride (GEM) loaded lipid polymer hybrid nanoparticles (LPHNs) for the enhancement the chemotherapeutic response. GEM, which is an anti-tumor drug, is frequently utilized for the treatment of non-small cell lung cancer, breast cancer and pancreatic cancer. GEM loaded LPHNs were formed and examined for pharmacokinetic profile and in vivo anticancer activity. Modified double emulsion solvent evaporation method was employed in the preparation of the LPHNs. Cytotoxicities of the GEM loaded LPHNs formulation were evaluated on MCF-7 and MDA-MB-231 cells by MTT assays. Pharmacokinetics and in vivo anticancer efficacy studies were conducted following intraperitoneal administration in female Sprague-Dawley rats. In vivo pharmacokinetic studies in rats exhibited the advantage of the GEM loaded LPHNs over commercial product Gemko® and the GEM loaded LPHNs had longer circulation time. The half-life of GEM in LPHNs formulation was notable advanced (4.2 folds) comparing to commercial product of GEM (native). These findings indicated that GEM loaded LPHNs can be used for enhancing antitumor efficacy for breast cancer treatment.

In vivo biodistribution of venlafaxine-PLGA nanoparticles for brain delivery: plain vs. functionalized nanoparticles

Background: Actually, no drugs provide therapeutic benefit to approximately one-third of depressed patients. Depression is predicted to become the first global disease by 2030. So, new therapeutic interventions are imperative.Research design and methods: Venlafaxine-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) were surface functionalized with two ligands against transferrin receptor to enhance access to brain. An in vitro blood-brain barrier model using hCMEC/D3 cell line was developed to evaluate permeability. In vivo biodistribution studies were performed using C57/bl6 mice. Particles were administered intranasal and main organs were analyzed.Results: Particles were obtained as a lyophilized powder easily to re-suspend. Internalization and permeability studies showed the following cell association sequence: TfRp-NPs>Tf-NPs>plain NPs. Permeability studies also showed that encapsulated VLF was not affected by P-gP pump efflux increasing its concentration in the basolateral side after 24 h. In vivo studies showed that 25% of plain NPs reach the brain after 30 min of one intranasal administration while less than 5% of functionalized NPs get the target.Conclusions: Plain NPs showed the highest ability to reach the brain vs. functionalized NPs after 30 min by intranasal administration. We suggest plain NPs probably travel via direct nose-to-brian route whereas functionalized NPs reach the brain by receptor-mediated endocytosis.

Development and characterization of gemcitabine hydrochloride loaded lipid polymer hybrid nanoparticles (LPHNs) using central composite design

Lipid polymer hybrid nanoparticles (LPHNs) combine the characteristics and beneficial properties of both polymeric nanoparticles and liposomes. The objective of this study was to design and optimize gemcitabine hydrochloride loaded LPHNs based on the central composite design approach. PLGA 50:50/PLGA 65:35 mass ratio (w/w), soya phosphatidylcholine (SPC)/polymer mass ratio (%, w/w) and amount of DSPE-PEG were chosen as the investigated independent variables. The LPHNs were prepared with modified double emulsion solvent evaporation method and characterized by testing their particle size, encapsulation efficiency, and cumulative release. The composition of optimal formulation was determined as 1,5 (w/w) PLGA 50:50/PLGA 65:35 mass ratio, 30% (w/w) SPC/polymer mass ratio and 15 mg DSPE-PEG. The results showed that the optimal formulation gemcitabine hydrochloride loaded LPHNs had encapsulation efficiency of 45,2%, particle size of 237 nm and cumulative release of 62,3% at the end of 24 h. The morphology of LPHNs was found to be spherical by transmission electron microscopy (TEM) observation. Stability studies showed that LPHNs were physically stable until 12 months at 4 °C and 9 months at 25 °C/60% RH. The results suggest that the LPHNs can be an effective drug delivery system for hydrophilic active pharmaceutical ingredient.

Using microfluidic platforms to develop CNS-targeted polymeric nanoparticles for HIV therapy

The human immunodeficiency virus (HIV) uses the brain as reservoir, which turns it as a promising target to fight this pathology. Nanoparticles (NPs) of poly(lactic-co-glycolic) acid (PLGA) are potential carriers of anti-HIV drugs to the brain, since most of these antiretrovirals, as efavirenz (EFV), cannot surpass the blood-brain barrier (BBB). Forasmuch as the conventional production methods lack precise control over the final properties of particles, microfluidics emerged as a prospective alternative. This study aimed at developing EFV-loaded PLGA NPs through a conventional and microfluidic method, targeted to the BBB, in order to treat HIV neuropathology. Compared to the conventional method, NPs produced through microfluidics presented reduced size (73 nm versus 133 nm), comparable polydispersity (around 0.090), less negative zeta-potential (-14.1 mV versus -28.0 mV), higher EFV association efficiency (80.7% versus 32.7%) and higher drug loading (10.8% versus 3.2%). The microfluidics-produced NPs also demonstrated a sustained in vitro EFV release (50% released within the first 24 h). NPs functionalization with a transferrin receptor-binding peptide, envisaging BBB targeting, proved to be effective concerning nuclear magnetic resonance analysis (δ = -0.008 ppm; δ = -0.017 ppm). NPs demonstrated to be safe to BBB endothelial and neuron cells (metabolic activity above 70%), as well as non-hemolytic (1-2% of hemolysis, no morphological alterations on erythrocytes). Finally, functionalized nanosystems were able to interact more efficiently with BBB cells, and permeability of EFV associated with NPs through a BBB in vitro model was around 1.3-fold higher than the free drug.

Nanomanufacturing through microfluidic-assisted nanoprecipitation: Advanced analytics and structure-activity relationships

We have employed microfluidics (cross-shaped chip) for the preparation of drug-loaded poly(lactic acid-co-glycolic acid) (PLGA) nanoparticles. The polymer precipitates from an acetone solution upon its controlled laminar mixing (flow focusing) with an aqueous solution of a surfactant, allowing for an operator-independent, up-scalable and reproducible preparative process of nanoformulations. Firstly, using PEGylated surfactants we have compared batch and microfluidic processes, and showed the superior reproducibility of the latter and its strong dependency on the acetone/water ratio (flow rate ratio). We have then focused on the issue of purification from free surfactant, and employed advanced characterization techniques such as flow-through dynamic light scattering as the in-line quality control technique, and field flow fractionation (FFF) with dynamic and static light scattering detection, which allowed the detection of surfactant micelles in mixture with nanoparticles (hardly possible with stand-alone dynamic light scattering). Finally, we have shown that the choice of polymer and surfactant affects the release behaviour of a model drug (paclitaxel), with high molecular weight PLGA (RG756) and low molecular weight surfactant (tocopheryl poly(ethylene glycol) 1000 succinate, TPGS) apparently showing higher burst and accelerated release.

Cellular uptake and anti-tumor activity of gemcitabine conjugated with new amphiphilic cell penetrating peptides

Gemcitabine (Gem) is used as a single agent or in combination with other anticancer agents to treat many types of solid tumors. However, it has many limitations such as a short plasma half-life, dose-limiting toxicities and drug resistance. Cell-penetrating peptides (CPPs) are short peptides which may deliver a large variety of cargo molecules into the cancerous cells. The current study was designed to evaluate the antiproliferative activity of gemcitabine chemically conjugated to CPPs. The peptides were synthesized using solid phase synthesis procedure. The uptake efficiency of CPPs into cells was examined by flow cytometry and fluorescent microscopy. The synthesized peptides were chemically conjugated to Gem and the in vitro cytotoxicity of conjugates was tested by MTT assay on A594 cell line. According to the obtained results, cellular uptake was increased with increasing the concentration of CPPs. On the other hand the coupling of Gem with peptides containing block sequence of arginine (R5W3R4) and some alternating sequences (i.e. [RW]6 and [RW]3) exhibited improved antitumor activity of the drug. The findings in this study support the advantages of using cell-penetrating peptides for improving intracellular delivery of Gem into tumor as well as its activity.

Gemcitabine and Antisense-microRNA Co-encapsulated PLGA-PEG Polymer Nanoparticles for Hepatocellular Carcinoma Therapy

Hepatocellular carcinoma (HCC) is highly prevalent, and the third most common cause of cancer-associated deaths worldwide. HCC tumors respond poorly to chemotherapeutic anticancer agents due to inherent and acquired drug resistance, and low drug permeability. Targeted drug delivery systems with significant improvement in therapeutic efficiency are needed for successful HCC therapy. Here, we report the results of a technique optimized for the synthesis and formulation of antisense-miRNA-21 and gemcitabine (GEM) co-encapsulated PEGylated-PLGA nanoparticles (NPs) and their in vitro therapeutic efficacy in human HCC (Hep3B and HepG2) cells. Water-in-oil-in-water (w/o/w) double emulsion method was used to coload antisense-miRNA-21 and GEM in PEGylated-PLGA-NPs. The cellular uptake of NPs displayed time dependent increase of NPs concentration inside the cells. Cell viability analyses in HCC (Hep3B and HepG2) cells treated with antisense-miRNA-21 and GEM co-encapsulated NPs demonstrated a nanoparticle concentration dependent decrease in cell proliferation, and the maximum therapeutic efficiency was attained in cells treated with nanoparticles co-encapsulated with antisense-miRNA-21 and GEM. Flow cytometry analysis showed that control NPs and antisense-miRNA-21-loaded NPs are not cytotoxic to both HCC cell lines, whereas treatment with free GEM and GEM-loaded NPs resulted in ∼9% and ∼15% apoptosis, respectively. Cell cycle status analysis of both cell lines treated with free GEM or NPs loaded with GEM or antisense-miRNA-21 displayed a significant cell cycle arrest at the S-phase. Cellular pathway analysis indicated that Bcl2 expression was significantly upregulated in GEM treated cells, and as expected, PTEN expression was noticeably upregulated in cells treated with antisense-miRNA-21. In summary, we successfully synthesized PEGylated-PLGA nanoparticles co- encapsulated with antisense-miRNA-21 and GEM. These co-encapsulated nanoparticles revealed increased treatment efficacy in HCC cells, compared to cells treated with either antisense-miRNA-21- or GEM-loaded NPs at equal concentration, indicating that down-regulation of endogenous miRNA-21 function can reduce HCC cell viability and proliferation in response to GEM treatment.

Droplet-microfluidics towards the assembly of advanced building blocks in cell mimicry

Therapeutic cell mimicry is an approach in nanomedicine aiming at substituting for missing or lost cellular functions employing nature-inspired concepts. Pioneered decades ago, only now is this technology empowered with the arsenal of nanotechnological tools and ready to provide radically new solutions such as assembling synthetic organelles and artificial cells. One of these tools is droplet microfluidics (D-μF), which provides the flexibility to generate cargo-loaded particles with tunable size and shape in a fast and reliable manner, an essential requirement in cell mimicry. This minireview aims at outlining the developments in D-μF from the past four years focusing on the assembly of nanoparticles, Janus-shaped and other non-spherical particles as well as their loading with biological payloads.

Nanomedicine strategies to overcome the pathophysiological barriers of pancreatic cancer

Pancreatic ductal adenocarcinoma (PDAC) is one of the leading causes of cancer- related deaths. PDAC remains one of the most difficult-to-treat cancers, owing to its unique pathobiological features: a nearly impenetrable desmoplastic stroma, and hypovascular and hypoperfused tumour vessels render most treatment options largely ineffective. Progress in understanding the pathobiology and signalling pathways involved in disease progression is helping researchers to develop novel ways to fight PDAC, including improved nanotechnology-based drug-delivery platforms that have the potential to overcome the biological barriers of the disease that underlie persistent drug resistance. So-called 'nanomedicine' strategies have the potential to enable targeting of the Hedgehog-signalling pathway, the autophagy pathway, and specific RAS-mutant phenotypes, among other pathological processes of the disease. These novel therapies, alone or in combination with agents designed to disrupt the pathobiological barriers of the disease, could result in superior treatments, with increased efficacy and reduced off-target toxicities compared with the current standard-of-care regimens. By overcoming drug-delivery challenges, advances can be made in the treatment of PDAC, a disease for which limited improvement in overall survival has been achieved over the past several decades. We discuss the approaches to nanomedicine that have been pursued to date and those that are the focus of ongoing research, and outline their potential, as well as the key challenges that must be overcome.

Co-expression of pregnane X receptor and ATP-binding cassette sub-family B member 1 in peripheral blood: A prospective indicator for drug resistance prediction in non-small cell lung cancer

The aim of the present study was to investigate the protein expression profiling of pregnane X receptor (PXR) and ATP-binding cassette sub-family B member 1 (ABCB1; also known as MDR1 or P-gp), present in the peripheral blood mononuclear cells (PBMCs) and cancerous tissues of cases of non-small cell lung cancer (NSCLC). Furthermore, the study aimed to assess the feasibility of predicting drug resistance through the medium of PBMCs. Of the subjects included in the study, 37 were histopathologically diagnosed with NSCLC and 17 were control patients without cancer. ThinPrep liquid-based smears with cytosine were applied in the examination of the PBMCs and proved quite effective in preserving the morphology and surface antigens of the lymphocytes. Measurements of expression levels in the PBMCs and cancerous tissues were obtained by immunohistochemical means. The results showed that, with the exception of the selective PXR expression in the normal lung tissues, the two types of proteins existed extensively throughout the PBMCs, normal tissues and tumors. Among the cancer patients, prior to chemotherapy, a significant rise in ABCB1 expression could be observed in the PBMCs, together with a similar rise in ABCB1 and PXR expression in the tumor specimens. Marked upregulation of the two proteins was detected in the PBMCs following 1 cycle of first-line chemotherapy. ABCB1 expression, correlated with PXR, persisted mostly in the PBMCs and tissue samples. When bound to and activated by ligands, PXR translocates from the cytoplasm to the nucleus of the cells. PXR subsequently binds to its DNA response elements as a heterodimer with the retinoid X receptor. A PXR translocation of moderate or low differentiation was identified in 3 cases of adenocarcinoma, which were co-expressing the two genes in the PBMCs prior to chemotherapy. During follow-up visits, tumor recurrence was observed within 3 months in 5 cases, which were characterized by PXR translocation. These findings indicate that the combined expression of PXR and ABCB1 in PBMCs may be used as a prospective indicator in diagnosis prior to histopathological diagnosis, and therefore may function as a novel biomarker for the prediction of drug resistance.

Can microfluidics address biomanufacturing challenges in drug/gene/cell therapies?

Translation of any inventions into products requires manufacturing. Development of drug/gene/cell delivery systems will eventually face manufacturing challenges, which require the establishment of standardized processes to produce biologically-relevant products of high quality without incurring prohibitive cost. Microfluidicu technologies present many advantages to improve the quality of drug/gene/cell delivery systems. They also offer the benefits of automation. What remains unclear is whether they can meet the scale-up requirement. In this perspective, we discuss the advantages of microfluidic-assisted synthesis of nanoscale drug/gene delivery systems, formation of microscale drug/cell-encapsulated particles, generation of genetically engineered cells and fabrication of macroscale drug/cell-loaded micro-/nano-fibers. We also highlight the scale-up challenges one would face in adopting microfluidic technologies for the manufacturing of these therapeutic delivery systems.

Nanoparticles with Precise Ratiometric Co-Loading and Co-Delivery of Gemcitabine Monophosphate and Cisplatin for Treatment of Bladder Cancer

Combination chemotherapy is a common practice in clinical management of malignancy. Synergistic therapeutic outcome is only achieved when tumor cells are exposed to cells in an optimal ratio. However, due to diverse physicochemical properties of drugs, no free drug cocktails or nanomaterials are capable of co-loading and co-delivering drugs at an optimal ratio. Herein, we develop a novel nano-platform with precise ratiometric co-loading and co-delivery of two hydrophilic drugs for synergistic anti-tumor effects. Based on previous work, we utilize a solvent displacement method to ratiometrically load dioleoyl phosphatidic acid (DOPA)-gemcitabine monophosphate and DOPA coated cisplatin-precipitate nanocores into the same PLGA NP. These cores are designed to have similar hydrophobic surface properties. GMP and cisplatin are engineered into PLGA NP at an optimal synergistic ratio (5:1, mol:mol) with over 70% encapsulation efficiency and were ratiometrically taken up by tumor cells in vitro and in vivo. These PLGA NP exhibit synergistic anti-cancer effects in a stroma-rich bladder tumor model. A single injection of dual drugs in PLGA NP can significantly inhibit tumor growth. This nanomaterial-system solves problems related to ratiometric co-loading and co-delivery of different hydrophilic moieties and provides possibilities for co-loading hydrophilic drugs with hydrophobic drugs for combination therapy.

Nanobody conjugated PLGA nanoparticles for active targeting of African Trypanosomiasis

Targeted delivery of therapeutics is an alternative approach for the selective treatment of infectious diseases. The surface of African trypanosomes, the causative agents of African trypanosomiasis, is covered by a surface coat consisting of a single variant surface glycoprotein, termed VSG. This coat is recycled by endocytosis at a very high speed, making the trypanosome surface an excellent target for the delivery of trypanocidal drugs. Here, we report the design of a drug nanocarrier based on poly ethylen glycol (PEG) covalently attached (PEGylated) to poly(D,L-lactide-co-glycolide acid) (PLGA) to generate PEGylated PLGA nanoparticles. This nanocarrier was coupled to a single domain heavy chain antibody fragment (nanobody) that specifically recognizes the surface of the protozoan pathogen Trypanosoma brucei. Nanoparticles were loaded with pentamidine, the first-line drug for T. b. gambiense acute infection. An in vitro effectiveness assay showed a 7-fold decrease in the half-inhibitory concentration (IC50) of the formulation relative to free drug. Furthermore, in vivo therapy using a murine model of African trypanosomiasis demonstrated that the formulation cured all infected mice at a 10-fold lower dose than the minimal full curative dose of free pentamidine and 60% of mice at a 100-fold lower dose. This nanocarrier has been designed with components approved for use in humans and loaded with a drug that is currently in use to treat the disease. Moreover, this flexible nanobody-based system can be adapted to load any compound, opening a range of new potential therapies with application to other diseases.

Building functional materials for health care and pharmacy from microfluidic principles and Flow Focusing

In this review, we aim at establishing a relationship between the fundamentals of the microfluidics technologies used in the Pharmacy field, and the achievements accomplished by those technologies. We describe the main methods for manufacturing micrometer drops, bubbles, and capsules, as well as the corresponding underlying physical mechanisms. In this regard, the review is intended to show non-specialist readers the dynamical processes which determine the success of microfluidics techniques. Flow focusing (FF) is a droplet-based method widely used to produce different types of fluid entities on a continuous basis by applying an extensional co-flow. We take this technique as an example to illustrate how microfluidics technologies for drug delivery are progressing from a deep understanding of the physics of fluids involved. Specifically, we describe the limitations of FF, and review novel methods which enhance its stability and robustness. In the last part of this paper, we review some of the accomplishments of microfluidics when it comes to drug manufacturing and delivery. Special attention is paid to the production of the microencapsulated form because this fluidic structure gathers the main functionalities sought for in Pharmacy. We also show how FF has been adapted to satisfy an ample variety of pharmaceutical requirements to date.