Unintended human ingestion of nanoplastics and small microplastics through drinking water, beverages, and food sources

Uncovering layer by layer the risk of nanoplastics to the environment and human health

Nanoplastics (NPs), defined as plastic particles with dimensions less than 100 nm, have emerged as a persistent environmental contaminant with potential risk to both environment and human health. Nanoplastics might translocate across biological barriers and accumulate in vital organs, leading to inflammatory responses, oxidative stress, and genotoxicity, already reported in several organisms. Disruptions to cellular functions, hormonal balance, and immune responses were also linked to NPs exposure in in vitro assays. Further, NPs have been found to adsorb other pollutants, such as persistent organic pollutants (POPs), and leach additives potentially amplifying their advere impacts, increasing the threat to organisms greater than NPs alone. However, NPs toxic effects remain largely unexplored, requiring further research to elucidate potential risks to human health, especially their accumulation, degradation, migration, interactions with the biological systems and long-term consequences of chronic exposure to these compounds. This review provides an overview of the current state-of-art regarding NPs interactions with environmental pollutants and with biological mechanisms and toxicity within cells.

Identification and occurrence of microplastics in drinking water bottles and milk packaging consumed by humans daily

Microplastic (MP) pollution has become a growing concern due to its potential environmental and health impacts. The present study aimed to investigate the presence of MPs in specific brands of drinking water bottle and milk packets. To identify the MPs, researchers employed microscopic techniques, FTIR spectroscopy, and FESEM with EDS. The types of polymers were determined by comparing the obtained values with reference standards. The study also assessed the potential daily microplastic exposure from drinking water and milk consumption. MPs were detected in the samples in three different shapes: filaments, fibers, and fragments. Four types of polymers were identified: polypropylene (PP), polyamide (PA), polysulfone (PSU), and polyethersulfone (PES). The colors observed included violet, blue, green, red, and black. In the analyzed drinking water samples, a total of 13 MPs sized 1-3 mm and 7 MPs sized 3-6 mm were found. In the milk samples, there were 2 MPs sized 4-5 mm and 4 MPs sized 2-3 mm. The results of the study indicate that MPs are present in the examined drinking water and milk, which are directly consumed by humans. This suggests that microplastic pollution may occur during the manufacturing or packaging processes of these products. The study recommends implementing measures to reduce microplastic contamination at the beginning of the production process for drinking water and milk.

What Gastroenterologists Should Know About Microplastics and Nanoplastics

Global production and widespread use of plastics are increasing dramatically. With current limited recycling and recovery options, microplastics and nanoplastics (MNPs) persist in the natural environment. Due to their ubiquity, human exposure to MNPs is inevitable. In addition to their inherent toxic effects, MNPs can adsorb harmful contaminants and act as vectors for microorganisms, compounding toxicological effects. After entering the body, bioaccumulation occurs in several tissues and organs, including the liver and the gastrointestinal (GI) tract. Proposed clinical effects of MNP absorption include endocrine disruption, alteration of the GI microbiome, and promotion of chronic inflammatory conditions. MNPs can also influence energy metabolism, activate inflammatory pathways, and increase oxidative stress leading to apoptosis. The GI tract is a major site of bioaccumulation for the MNPs in animals and humans. In this editorial, the current understanding of how MNPs are processed is discussed. Discussion on MNP effects on internal microflora, and their proposed role in developing inflammatory bowel diseases, MNP toxicokinetics, and their significance in health and disease are also reviewed. There is a need to understand the impact of MNP exposure on gut health and gut microbiota and identify current research gaps.

Polyethylene microplastics affect behavioural, oxidative stress, and molecular responses in the Drosophila model

The escalating presence of microplastic pollution poses a significant environmental threat, with far-reaching implications for both ecosystems and human health. This study investigated the toxicological impact of polyethylene microplastics (PE MPs) using Drosophila melanogaster, fruit flies, as a model organism. Drosophila were exposed to PE MPs orally at concentrations of 1 mg ml-1 and 10 mg ml-1 agar food. The study assessed behavioural parameters and biochemical markers including reactive oxygen species (ROS), superoxide dismutase (SOD), and glutathione-S-transferase (GST) activity. The expression levels of key genes (Hsp70Bc, rpr, and p53) were also analysed using the RT-qPCR technique. Results indicated a significant decline in climbing activity among adult flies and crawling behaviour in larvae, indicating potential disruption of motor function. Biochemical analysis revealed elevated ROS levels, indicative of oxidative stress, in both larval and fly stages. Moreover, the antioxidant defence system exhibited decreased SOD activity and a concentration-dependent increase in GST activity indicating the functioning of a quick xenobiotic clearance mechanism. Gene expression analysis demonstrated upregulation of rpr, p53, and Hsp70Bc genes, suggesting activation of cell death pathways and stress response mechanisms. Overall, these findings underline the adverse effects of PE MPs on Drosophila, including behavioural impairment, oxidative stress, and activation of stress response pathways.

First identification of microplastics in human uterine fibroids and myometrium

Microplastics (MPs) pollution has received widespread attention in recent years as the use of plastics continues to increase. However, currently no studies have reported the finding of MPs in human uterine fibroids (UFs) and myometrium tissues. In this study, UFs tissues (n = 48) and myometrium tissues (n = 40) from 48 patients and myometrium tissues (n = 8) from healthy population were collected. Following digestion of the samples by 10% KOH and 30% H2O2, MPs were analyzed qualitatively and quantitatively using Raman spectroscopy. The 16 UFs and myometrium tissue samples contained an average of 1.5 ± 1.17 MP particles per gram of tissue. Notably, the abundance of MPs in the UFs tissues (2.13 ± 1.17 particles per gram) was higher than in the myometrium tissues (0.88 ± 0.78 particles per gram). In the same cohort of individuals with UFs, the quantities of MPs detected in the affected UFs tissue (2.63 ± 1.77 particles per gram) exceeded those detected in healthy tissue (1.08 ± 0.93 particles per gram), particularly in elderly patients. A correlation was observed between elevated MP levels and frequent consumption of takeout meals and bottled water among patients, indicating that MP ingestion through food sources might have contributed to the increased abundance and variety of MPs within UFs. Furthermore, UFs increased in size with higher concentrations of MPs, which may have been related to elevated levels of MPs-induced hormones. This study provides new insights into the assessment of the relationship between exposure to MPs and human disease risk.

Unscrambling why plastics aren't detectable in chicken eggs

Several food groups have been reported to contain varying concentrations of plastics. This study was designed to quantitatively investigate for the first time in Australia the presence of plastics in store-bought chicken eggs. Three commonly consumed brands of free-range, free-range organic, barn-laid and backyard (home-laid) chicken egg samples were analyzed for seven common polymers (i.e., polypropylene, polyethylene, polyvinyl chloride, polyethylene terephthalate, polystyrene, poly-(methylmethacrylate) and polycarbonate). Samples were extracted by enzyme digestion and pressurized liquid extraction, followed by quantitative analysis through double-shot microfurnace pyrolysis coupled to gas chromatography-mass spectrometry. No plastics were detected at concentrations > limit of detection (LOD) (from 0.04 μg/g for PS to 0.22 μg/g for PVC) in the egg samples analyzed, regardless of brand and category, suggesting limited exposure of Australians to plastics from consuming eggs This study provides valuable baseline data and underscores the importance of continued monitoring to ensure the safety and integrity of food supplies in the face of rising environmental plastic pollution.

Effects of Polyvinyl Chloride Microplastics on the Reproductive System, Intestinal Structure, and Microflora in Male and Female Mice

The pervasive use of plastics in numerous industrial sectors has resulted in the circulation of microplastics across diverse ecosystems and food chains, giving rise to mounting concerns regarding their potential adverse impacts on biological systems and the environment. The objective of this experiment was to investigate the distinct effects of microplastic-polyvinyl chloride (PVC) exposure on the reproductive system, intestinal tissue structure, and intestinal microbial flora of both male and female mice. A total of 24 4-week-old Kunming mice were randomly assigned to one of four groups: male control group (CM), female control group (CF), male PVC test group (PVCM), and female PVC test group (PVCF) (n = 6). The findings revealed that in terms of the reproductive system, the PVCM group exhibited an impaired testicular structure with an irregular arrangement and a significant reduction in spermatogonia, spermatocytes, and spermatozoa within the seminiferous tubules (p < 0.01). The PVCF group exhibited a notable decrease in ovarian follicles (p < 0.01), accompanied by a reduction in uterus volume, fallopian tube volume, and muscle layer thickness, all of which also decreased significantly (p < 0.01). In comparison to the control groups, exposure to PVC resulted in a reduction in the width and height of the intestinal villi, accompanied by an increase in crypt depth. This led to a significant alteration in the ratio of villus height to crypt depth (V/C) (p < 0.01). Moreover, a reduction in microbial species diversity was observed within both the PVCM and PVCF groups; additionally, it was accompanied by contrasting changes in relative abundance and functional gene profiles among the major intestinal flora constituents. In summary, the findings indicate that PVC induces damage to both male and female mice reproductive and digestive systems, further exhibiting notable sex-dependent effects on mouse intestinal microflora composition, which correlates significantly with its impact on reproductive organs.

Degradation of Polymer Materials in the Environment and Its Impact on the Health of Experimental Animals: A Review

The extensive use of polymeric materials has resulted in significant environmental pollution, prompting the need for a deeper understanding of their degradation processes and impacts. This review provides a comprehensive analysis of the degradation of polymeric materials in the environment and their impact on the health of experimental animals. It identifies common polymers, delineates their degradation pathways, and describes the resulting products under different environmental conditions. The review covers physical, chemical, and biological degradation mechanisms, highlighting the complex interplay of factors influencing these processes. Furthermore, it examines the health implications of degradation products, using experimental animals as proxies for assessing potential risks to human health. By synthesizing current research, the review focuses on studies related to small organisms (primarily rodents and invertebrates, supplemented by fish and mollusks) to explore the effects of polymer materials on living organisms and underscores the urgency of developing and implementing effective polymer waste management strategies. These strategies are crucial for mitigating the adverse environmental and health impacts of polymer degradation, thus promoting a more sustainable interaction between human activities and the natural environment.

Detection of microplastics in human tissues and organs: A scoping review

Background

Research on microplastics has largely focused on the environment and marine organisms until recently. A growing body of evidence has detected microplastics in human organs and tissues, with their exact entry routes being unclear and their potential health effects remain unknown. This scoping review aimed to characterise microplastics in human tissues and organs, examine their entry routes and addressing gaps in research analytical techniques.

Methods

Eligibility criteria included English language full text articles, in-vivo human studies only, and searching the databases using pre-defined terms. We based our analysis and reporting on the PRISMA guideline and examined the quality of evidence using the risk of bias assessment tool.

Results

Of 3616 articles screened, 223 evaluated and 26 were eventually included in this review. Nine were high risk for bias, three were unclear risk and the rest low risk for bias. Microplastics were detected in 8/12 human organ systems including cardiovascular, digestive, endocrine, integumentary, lymphatic, respiratory, reproductive and urinary. Microplastics were also observed in other human biological samples such as breastmilk, meconium, semen, stool, sputum and urine. Microplastics can be characterised based on shape, colours, and polymer type. Potential entry routes into human included atmospheric inhalation and ingestion through food and water. The extraction techniques for analysis of microplastics in human tissues vary significantly, each offering distinct advantages and limitations.

Conclusions

Microplastics are commonly detected in human tissues and organs, with distinct characteristics and entry routes, and variable analytical techniques exist.

Impact of polyethylene nanoplastics on human intestinal cells

Polyethylene (PE) is one of the most widely used plastics in the world. Its degradation leads to the production of small particles including microplastics and nanoplastics (NPs). Plastic particles' presence poses a health risk. The aim of this work was to investigate the toxicity of two model surfactant-free PE NPs prepared by polymerization of ethylene from cationic and anionic water-soluble initiators on human cell lines Caco-2 and HT29-MTX. After physicochemical characterization, their acute and subacute toxicity profile, including cytotoxicity, oxidative stress, and genotoxicity, was evaluated on both cell lines. Results showed a size increase of PE NPs in culture medium. Zeta potential values close to -10 mV were no longer dependent on the initiator charge after adsorption of serum components in culture medium. However, the cellular toxicity of the cationic and anionic PE NPs was very different. A time-and-concentration dependent cytotoxic, oxidative, and genotoxic effects on Caco-2 cells were only observed for PE NPs prepared with cationic initiators. No toxicity was observed on HT29-MTX, likely due to the protective mucus layer. Genotoxicity correlated with oxidative stress of some PE NPs on Caco-2 cells was observed from a concentration of 0.1 mg.mL-1 after 48-h exposure.

Nanoplastic Sample Cleanup by Micro-Electromembrane Extraction across Free Liquid Membranes

Sample preparation techniques enabling the separation and cleanup of nanoplastics removing other components present in complex sample matrices are scarce. Herein, micro-electromembrane extraction (μ-EME) has been explored for this purpose based on the extraction of nanoplastic particles across a free liquid membrane (FLM). The extraction unit is based on a perfluoroalkoxy tube sequentially filled with the acceptor solution (20 μL 5 mM phosphate buffer, pH 10.7), FLM (10 μL 1-pentanol), and donor solution (20 μL sample/standard solution). Sulfonated polystyrene beads (200 nm particle size) were selected as a model mimicking negatively charged nanoplastics. At 700 V, nanoplastics transferred from the donor solution into the FLM before moving across the FLM into the acceptor solution. Quantitative nanoplastic measurements after μ-EME were performed by injecting the acceptor solution into a capillary electrophoresis system with diode array detection. μ-EME allowed the rapid nanoplastic sample cleanup, requiring an extraction time of just 90 s and obtaining a nanoplastic transfer yield through the FLM of 60% with RSD values below 9%. The μ-EME technique enabled the efficient sample matrix cleanup of nanoplastics spiked in different tea matrices. Nanoplastic transfer yield through the FLM for black tea and flavored tea matrices were 56% and 47%, respectively, with complete sample matrix removal of UV-absorbing compounds.

Seasonal variation, spatial distribution and risk assessment of microplastics in surface waters of Periyar River, Kerala, India

Microplastics, an emerging contaminant, are widespread in oceans around the world, and rivers are the key conveyors of these pollutants into the oceans. There exists a dearth of available data pertaining to seasonal fluctuation, spatial distribution and risk assessment of microplastics in rivers extending from upper reaches to the lower reaches. The collection of such data is of utmost importance for the purpose of formulating beneficial management strategies for riverine microplastics. In order to bridge this research gap, an investigation was made in the Periyar River in Kerala, India, which is exposed to anthropogenic stress and is at risk of microplastic pollution. A total of eighteen sites (six sites each from downstream, midstream and upstream) along the 244 km of the river were investigated across three seasons in a year. The study revealed a discernible pattern in the spatial distribution of microplastic concentrations, wherein there was a rise in abundance from the upstream to midstream and then a sudden increase of abundance along the downstream regions towards the lower reaches. The highest mean microplastic abundance of 124.95 items/L was obtained during the monsoon season followed by post-monsoon season i.e. 123.21 items/L and pre-monsoon i.e. 120.50 items/L. The predominant forms of microplastics were found to be fibres, fragments and filaments. Most prevalent polymer types acquired were polyethylene (PE) and polypropylene (PP). Pollution hazard index (PHI) and pollution load index (PLI) were also evaluated to assess the water quality of this river. The findings of this study conclude that the Periyar River is polluted with microplastics throughout its course and offer significant insights into the detection of microplastic origins in river systems and lend support to the implementation of potential measures aimed at mitigating their impact.

Environmental concentrations of microplastic-induced gut microbiota and metabolite disruption in silkworm, Bombyx mori

Microplastics (MPs) existing extensively in various ecosystems can be ingested by marine organisms and enter the food chain, resulting the health risks from the presence of MPs in aquatic and terrestrial ecosystems. In the present study, an ideal model for Lepidoptera, the silkworm, Bombyx mori, was exposed to environmental concentrations (0.125 μg, 0.25 μg or 0.5 μg/diet) of MPs for 5 days, and the global changes in gut microbes and metabolites were subsequently examined via 16S rDNA sequencing and GC‒MS-based metabolomics. The results showed that MPs exposure did not seriously threaten survival but may regulate signaling pathways involved in development and cocoon production. MPs exposure induced gut microbiota perturbation according to the indices of α-diversity and β-diversity, and the functional prediction of the altered microbiome and associated metabolites demonstrated the potential roles of the altered microbiome following MPs exposure in the metabolic and physiological states of silkworm. The metabolites markedly altered following MPs exposure may play vital biological roles in energy metabolism, lipid metabolism, xenobiotic detoxification and the immune system by directly or indirectly affecting the physiological state of silkworms. These findings contribute to assessing the health risks of MPs exposure in model insects and provide novel insight into the toxicity mechanism of MPs.

Nanoplastics and Neurodegeneration in ALS

Plastic production, which exceeds one million tons per year, is of global concern. The constituent low-density polymers enable spread over large distances and micro/nano particles (MNPLs) induce organ toxicity via digestion, inhalation, and skin contact. Particles have been documented in all human tissues including breast milk. MNPLs, especially weathered particles, can breach the blood-brain barrier, inducing neurotoxicity. This has been documented in non-human species, and in human-induced pluripotent stem cell lines. Within the brain, MNPLs initiate an inflammatory response with pro-inflammatory cytokine production, oxidative stress with generation of reactive oxygen species, and mitochondrial dysfunction. Glutamate and GABA neurotransmitter dysfunction also ensues with alteration of excitatory/inhibitory balance in favor of reduced inhibition and resultant neuro-excitation. Inflammation and cortical hyperexcitability are key abnormalities involved in the pathogenic cascade of amyotrophic lateral sclerosis (ALS) and are intricately related to the mislocalization and aggregation of TDP-43, a hallmark of ALS. Water and many foods contain MNPLs and in humans, ingestion is the main form of exposure. Digestion of plastics within the gut can alter their properties, rendering them more toxic, and they cause gut microbiome dysbiosis and a dysfunctional gut-brain axis. This is recognized as a trigger and/or aggravating factor for ALS. ALS is associated with a long (years or decades) preclinical period and neonates and infants are exposed to MNPLs through breast milk, milk substitutes, and toys. This endangers a time of intense neurogenesis and establishment of neuronal circuitry, setting the stage for development of neurodegeneration in later life. MNPL neurotoxicity should be considered as a yet unrecognized risk factor for ALS and related diseases.

Microplastics in drinking water: A review on methods, occurrence, sources, and potential risks assessment

Microplastics in drinking water captured widespread attention following reports of widespread detection around the world. Concerns have been raised about the potential adverse effects of microplastics in drinking water on human health. Given the widespread interest in this research topic, there is an urgent need to compile existing data and assess current knowledge. This paper provides a systematic review of studies on microplastics in drinking water, their evidence, key findings, knowledge gaps, and research needs. The data collected show that microplastics are widespread in drinking water, with large variations in reported concentrations. Standardized methodologies of sampling and analysis are urgently needed. There were more fibrous and fragmented microplastics, with the majority being <10 μm in size and composed of polyester, polyethylene, polypropylene, and polystyrene. Little attention has been paid to the color of microplastics. More research is needed to understand the occurrence and transfer of microplastics throughout the water supply chain and the treatment efficiency of drinking water treatment plants (DWTPs). Methods capable of analyzing microplastics <10 μm and nanoplastics are urgently needed. Potential ecological assessment models for microplastics currently in use need to be improved to take into account the complexity and specificity of microplastics.

Analysing micro- and nanoplastics with cutting-edge infrared spectroscopy techniques: a critical review

The escalating prominence of micro- and nanoplastics (MNPs) as emerging anthropogenic pollutants has sparked widespread scientific and public interest. These minuscule particles pervade the global environment, permeating drinking water and food sources, prompting concerns regarding their environmental impacts and potential risks to human health. In recent years, the field of MNP research has witnessed the development and application of cutting-edge infrared (IR) spectroscopic instruments. This review focuses on the recent application of advanced IR spectroscopic techniques and relevant instrumentation to analyse MNPs. A comprehensive literature search was conducted, encompassing articles published within the past three years. The findings revealed that Fourier transform infrared (FTIR) spectroscopy stands as the most used technique, with focal plane array FTIR (FPA-FTIR) representing the cutting edge in FTIR spectroscopy. The second most popular technique is quantum cascade laser infrared (QCL-IR) spectroscopy, which has facilitated rapid analysis of plastic particles. Following closely is optical photothermal infrared (O-PTIR) spectroscopy, which can furnish submicron spatial resolution. Subsequently, there is atomic force microscopy-based infrared (AFM-IR) spectroscopy, which has made it feasible to analyse MNPs at the nanoscale level. The most advanced IR instruments identified in articles covered in this review were compared. Comparison metrics encompass substrates/filters, data quality, spatial resolution, data acquisition speed, data processing and cost. The limitations of these IR instruments were identified, and recommendations to address these limitations were proposed. The findings of this review offer valuable guidance to MNP researchers in selecting suitable instrumentation for their research experiments, thereby facilitating advancements in research aimed at enhancing our understanding of the environmental and human health risks associated with MNPs.

Exposure to different surface-modified polystyrene nanoparticles caused anxiety, depression, and social deficit in mice via damaging mitochondria in neurons

Nanoplastics (NPs) are unavoidable hazardous materials that result from the human production and use of plastics. While there is evidence that NPs can bioaccumulate in the brain, no enough research regarding the pathways by which NPs reach the brain was conducted, and it is also urgently needed to evaluate the health threat to the nervous system. Here, we observed accumulation of polystyrene nanoplastics (PS-NPs) with different surface modifications (PS, PS-COOH, and PS-NH2) in mouse brains. Further studies showed that PS-NPs disrupted the tight junctions between endothelial cells and transport into endothelial cells via the endocytosis and macropinocytosis pathways. Additionally, NPs exposure induced a series of alternations in behavioral tests, including anxiety- and depression-like changes and impaired social interaction performance. Further results identified that NPs could be internalized into neurons and localized in the mitochondria, bringing about mitochondrial dysfunction and a concurrent decline of ATP production, which might be associated with abnormal animal behaviors. The findings provide novel insights into the neurotoxicity of NPs and provide a basis for the formulation of policy on plastic production and usage by relevant government agencies.

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Regulatory Science Perspective on the Analysis of Microplastics and Nanoplastics in Human Food

Microplastics are increasingly reported, not only in the environment but also in a wide range of food commodities. While studies on microplastics in food abound, the current state of science is limited in its application to regulatory risk assessment by a continued lack of standardized definitions, reference materials, sample collection and preparation procedures, fit-for purpose analytical methods for real-world and environmentally relevant plastic mixtures, and appropriate quality controls. This is particularly the case for nanoplastics. These methodological challenges hinder robust, quantitative exposure assessments of microplastic and nanoplastic mixtures from food consumption. Furthermore, limited toxicological studies on whether microplastics and nanoplastics adversely impact human health are also impeded by methodology challenges. Food safety regulatory agencies must consider both the exposure and the risk of contaminants of emerging concern to ascertain potential harm. Foundational to this effort is access to and application of analytical methods with the capability to quantify and characterize micro- and nanoscale sized polymers in complex food matrices. However, the early stages of method development and application of early stage methods to study the distribution and potential health effects of microplastics and nanoplastics in food have largely been done without consideration of the stringent requirements of methods to inform regulatory activities. We provide regulatory science perspectives on the state of knowledge regarding the occurrence of microplastics and nanoplastics in food and present our general approach for developing, validating, and implementing analytical methods for regulatory purposes.

Unraveling the micro- and nanoplastic predicament: A human-centric insight

Micro- and nanoplastics are vast anthropogenic pollutants in our direct surroundings with a robust environmental stability and a potential for a long-lasting and increasing global circulation. This has raised concerns among the public and policy makers for human health upon exposure to these particles. The micro- and nanoplastic burden on humans is currently under debate, along with criticism on the experimental approaches used in hazard assessment. The present review presents an overview of the human-relevant aspects associated with the current micro-and nanoplastic burden. We focus on environmental circulation and the estimation of exposure quantities to humans, along with a state-of-the-art overview of particle accumulation in over 15 human organs and other specimen. Additionally, data regarding particle characteristics used in toxicity testing was extracted from 91 studies and discussed considering their environmental and human relevance.

A comprehensive review on the source, ingestion route, attachment and toxicity of microplastics/nanoplastics in human systems

Microplastics (MPs)/nanoplastics (NPs) are widely found in the natural environment, including soil, water and the atmosphere, which are essential for human survival. In the recent years, there has been a growing concern about the potential impact of MPs/NPs on human health. Due to the increasing interest in this research and the limited number of studies related to the health effects of MPs/NPs on humans, it is necessary to conduct a systematic assessment and review of their potentially toxic effects on human organs and tissues. Humans can be exposed to microplastics through ingestion, inhalation and dermal contact, however, ingestion and inhalation are considered as the primary routes. The ingested MPs/NPs mainly consist of plastic particles with a particle size ranging from 0.1 to 1 μm, that distribute across various tissues and organs within the body, which in turn have a certain impact on the nine major systems of the human body, especially the digestive system and respiratory system, which are closely related to the intake pathway of MPs/NPs. The harmful effects caused by MPs/NPs primarily occur through potential toxic mechanisms such as induction of oxidative stress, generation of inflammatory responses, alteration of lipid metabolism or energy metabolism or expression of related functional factors. This review can help people to systematically understand the hazards of MPs/NPs and related toxicity mechanisms from the level of nine biological systems. It allows MPs/NPs pollution to be emphasized, and it is also hoped that research on their toxic effects will be strengthened in the future.

An evaluation on microplastic accumulations in Turkish soils under different land uses

Microplastic (MP) pollution is now widely reported in soil ecosystems. However, the level of this pollution in soil ecosystems has not been sufficiently elucidated. Moreover, there is little understanding of how land use conditions affect the occurrence and distribution of MPs in soils. Therefore, this study examined 55 soil samples (44 agricultural and 11 urban) from the Mediterranean, Aegean, and Marmara regions of Türkiye, representing both agricultural and urban land uses. The samples were analyzed for MP distribution characteristics, such as abundance, shape, size, color, and type. Different types of MPs were detected in the soil samples, and their averages in agricultural and urban soils were 192.7 ± 14.2 and 127.3 ± 21.6 particles kg-1, respectively. MP abundance in the soil exhibited variations between different land uses, with agricultural areas showing higher levels compared to urban areas. In agricultural soils, MPs were predominantly blue-colored (44.6 %), in the form of fibers (74.9 %), smaller than 1000 μm (66.1 %), and primarily constituted polyethylene (90.8 %). In urban areas, MPs were also blue-colored (54.7 %), had a fiber shape (64.2 %), smaller than 1000 μm (70.6 %), and mostly belonged to the polyethylene category (78.5 %). A significant difference in MP concentrations was observed between agricultural and urban areas, reflecting the influence of distinct land uses on MP levels. Moreover, Principal Component Analysis (PCA) revealed that soil properties, including pH, electrical conductivity, organic matter, aggregate stability, average weight diameter, sand, clay, and silt, emerged as the primary determinants influencing the abundance and size of MPs within the soil. These findings contribute valuable insights into the origins of soil MPs and the intricate connections between MPs and varying soil characteristics across diverse land use categories.

Influence of polyethylene terephthalate (PET) microplastic on selected active substances in the intramural neurons of the porcine duodenum

BACKGROUND

Currently, society and industry generate huge amounts of plastics worldwide. The ubiquity of microplastics is obvious, but its impact on the animal and human organism remains not fully understood. The digestive tract is one of the first barriers between pathogens and xenobiotics and a living organism. Its proper functioning is extremely important in order to maintain homeostasis. The aim of this study was to determine the effect of microplastic on enteric nervous system and histological structure of swine duodenum. The experiment was carried out on 15 sexually immature gilts, approximately 8 weeks old. The animals were randomly divided into 3 study groups (n = 5/group). The control group received empty gelatin capsules once a day for 28 days, the first research group received daily gelatin capsules with polyethylene terephthalate (PET) particles as a mixture of particles of various sizes (maximum particle size 300 µm) at a dose of 0.1 g/animal/day. The second study group received a dose ten times higher-1 g/animal/day.

RESULTS

A dose of 1 g/day/animal causes more changes in the enteric nervous system and in the histological structure of duodenum. Statistically significant differences in the expression of cocaine and amphetamine regulated transcript, galanin, neuronal nitric oxide synthase, substance P, vesicular acetylcholine transporter and vasoactive intestinal peptide between control and high dose group was noted. The histopathological changes were more frequently observed in the pigs receiving higher dose of PET.

CONCLUSION

Based on this study it may be assumed, that oral intake of microplastic might have potential negative influence on digestive tract, but it is dose-dependent.

Interaction and mechanistic studies of thiram and common microplastics in food and associated changes in hazard

Microplastics (MPs), an emerging pollutant in the environment and food, may adsorb other contaminants such as pesticide due to particles' properties. The adsorption behavior and their hazardous changes of four common types of MPs to thiram was investigated. The adsorption kinetics and isotherm models were fitted well using the pseudo-second-order model and the Langmuir model respectively, indicating forces such as van der Waals forces dominate, and the maximum adsorption capacity at pH values of 6-7 also indicates that electrostatic forces play a smaller role. The adsorption thermodynamic studies showed that the adsorption was a spontaneous and exothermic process. The decrease in the adsorption capacity as the concentration of MPs increases and more adsorption by aged MPs demonstrate that the adsorption process is related to the sites on the surface of MPs. Due to the influence of ionic strength, the adsorption capacity of MPs for thiram increases significantly when the adsorption process takes place in solutions with salinity or in orange and apple juices. The bioavailability of thiram adsorbed by PVC and PET increased significantly. This study highlights the strong role of MPs in food as carriers of pesticide residues in food systems and that the combined hazard should also be of concern.

Oral exposure to polyethylene microplastics induces inflammatory and metabolic changes and promotes fibrosis in mouse liver

Accumulating evidence shows widespread contamination of water sources and food with microplastics. Although the liver is one of the main sites of bioaccumulation within the human body, it is still unclear whether microplastics produce damaging effects. In particular, the hepatic consequences of ingesting polyethylene (PE) microplastics in mammals are unknown. In this study, female mice were fed with food contaminated with 36 and 116 µm diameter PE microbeads at a dosage of 100 µg/g of food for 6 and 9 weeks. Mice were exposed to each type of microbead, or co-exposed to the 2 types of microbeads. Mouse liver showed altered levels of genes involved in uptake, synthesis, and β-oxidation of fatty acids. Ingestion of PE microbeads disturbed the detoxification response, promoted oxidative imbalance, increased inflammatory foci and cytokine expression, and enhanced proliferation in liver. Since relative expression of the hepatic stellate cell marker Pdgfa and collagen deposition were increased following PE exposure, we assessed the effect of PE ingestion in a mouse model of CCl4-induced fibrosis and showed that PE dietary exposure exacerbated liver fibrogenesis. These findings provide the first demonstration of the adverse hepatic effects of PE ingestion in mammals and highlight the need for further health risk assessment in humans.

Hydrophobicity-driven self-assembly of nanoplastics and silver nanoparticles for the detection of polystyrene microspheres using surface enhanced Raman spectroscopy

Microplastics (MPs) and Nanoplastics (NPs) accumulated in the environment have been identified as a major global issue due to their potential harm to wildlife. Current research in the detection of MPs is well established. However, the detection of NPs remains challenging. The aim of this paper is to investigate the detection of polystyrene (PS) NPs on a super-hydrophobic substrate using surface-enhanced Raman spectroscopy (SERS) technology after high-speed centrifugation of PS NPs and AgNPs. The hydrophobic substrate reduces the contact area of droplet, concentrating PS NPs and AgNPs on a small spot, which eliminates the random distribution of nano particles. The condensed PS NPs and AgNPs improve the SERS intensity, reproductivity and detection sensitivity. The results show that SERS measurement on a hydrophobic substrate could significantly improve the detection sensitivity of PS NPs, with the detection limits of PS NPs as low as 0.5 mg/L (500 nm PS NPs) and 1 mg/L (100 nm PS NPs). The study provides an effective and rapid method for the detection of NPs at trace concentration, demonstrating more possibility for the future detection of trace NPs in the aquatic environment.

Impact of a real food matrix and in vitro digestion on properties and acute toxicity of polystyrene microparticles

Although it is proved that humans ingest microplastics via food, and microplastics were found in human tissues, blood and feces, there needs to be more data on the properties and health-related effects of plastic particles that interact with food and undergo digestion. This study aimed to examine the impact of a real food matrix, milk, on the behavior and gastrointestinal fate of polystyrene microparticles (PSMP). In the presence of the food matrix, the net negative ζ-potential values of PSMP (diameter size of 1.823 μm) decreased significantly due to the formation of the corona, mostly consisting of α and β-casein fragments. Protein corona profiles and morphologies of particles incubated with whole and skim milk were found to be similar, and the protein profiles were completely altered after in vitro digestion simulation. In vitro and in vivo toxicity studies showed that neither bare PSMP nor food-interacted PSMP pose acute toxicity on the Caco-2 cell line and zebrafish embryos under the chosen experimental conditions. In summary, these results may contribute to a better understanding of changes that microplastics undergo in foods. Further studies on repeated exposure or chronic toxicity are needed to fully reveal the effect of food matrix on microplastic toxicity.

Microplastics exposure and immunologic response

OBJECTIVE

To assess the impact of microplastics (MPs) on human health.

DATA SOURCE

The authors conducted a non-systematic review of articles published in English, Portuguese, French, and Spanish in the last decade in the following databases: PubMed, Google Scholar, EMBASE, and SciELO. The keywords used were: microplastics OR nanoplastics OR marine litter OR toxicology OR additives AND human health OR children OR adults.

DATA SUMMARY

MPs are a group of emerging contaminants that have attracted scientific interest and societal attention in the last decade due to their ubiquitous detection in all environments. Humans can primarily be exposed to MPs and nanoplastics via oral and inhalation routes, but dermal contact cannot be overlooked, especially in young children. The possible toxic effects of plastic particles are due to their potential toxicity, often combined with that of leachable additives and adsorbed contaminants.

CONCLUSIONS

Unless the plastic value chain is transformed over the next two decades, the risks to species, marine ecosystems, climate, health, economy, and communities will be unmanageable. However, along with these risks are the unique opportunities to help transition to a more sustainable world.

The detrimental effects of micro-and nano-plastics on digestive system: An overview of oxidative stress-related adverse outcome pathway

With the massive manufacture and use of plastics, plastic pollution-related environmental impacts have raised great concern in recent years. As byproducts of plastic fragmentation and degradation, microplastics (MPs) and nanoplastics (NPs) have been identified as novel pollutants that posed a threat to the ecosystem and humans. Since MPs/NPs could be transported via the food chain and retained in the water, the digestive system should be one of the major targets of MPs/NPs-related toxicity. Although considerable evidence has supported the digestive toxicity of MPs/NPs, the proposed mechanisms remained ambiguous due to the variety of study types, models, and endpoints. This review provided a mechanism-based perspective on MPs/NPs-induced digestive effects by adopting the adverse outcome pathway framework as a promising tool. The overproduction of reactive oxygen species was identified as the molecular initiating event in MPs/NPs-mediated injury to the digestive system. A series of detrimental effects including oxidative stress, apoptosis, inflammation, dysbiosis, and metabolic disorders were summarized as key events. Finally, the occurrence of these effects eventually led to an adverse outcome, suggesting a possible increase in the incidence of digestive morbidity and mortality.

Occurrence and size distribution study of microplastics in household water from different cities in continental Spain and the Canary Islands

The purpose of this study was to investigate the occurrence of microplastics (MPs) in drinking water in Spain by comparing tap water from different locations using common sampling and identification procedures. We sampled tap water from 24 points in 8 different locations from continental Spain and the Canary Islands by means of 25 μm opening size steel filters coupled to household connections. All particles were measured and spectroscopically characterized including not only MPs but also particles consisting of natural materials with evidence of industrial processing, such as dyed natural fibres, referred insofar as artificial particles (APs). The average concentration of MPs was 12.5 ± 4.9 MPs/m³ and that of anthropogenic particles 32.2 ± 12.5 APs/m³. The main synthetic polymers detected were polyamide, polyester, and polypropylene, with lower counts of other polymers including the biopolymer poly(lactic acid). Particle size and mass distributions were parameterized by means of power law distributions, which allowed performing estimations of the concentration of smaller particles provided the same scaling parameter of the power law applies. The calculated total mass concentration of the identified MPs was 45.5 ng/L. The observed size distribution of MPs allowed an estimation for the concentration of nanoplastics (< 1 µm) well below the ng/L range; higher concentrations are not consistent with scale invariant fractal fragmentation. Our findings showed that MPs in the drinking water sampled in this work do not represent a significant way of exposure to MPs and would probably pose a negligible risk for human health.

Complementary Analysis for Undetectable Microplastics from Contact Lenses to Aquatic Environments via Fourier Transform Infrared Spectroscopy

Although microplastics (MPs) are intrinsically toxic and function as vectors for organic micropollutants, their discharge from wastewater treatment plant effluents and human activity remains unknown owing to the limitations of detection and treatment technologies. It is imperative to quantify MPs from human activities involving the consumption of various plastic products. This study warns that contact lenses can generate MPs and nanoplastics (NPs) after being discharged into aquatic environments. Identification via micro-Fourier transform infrared spectroscopy revealed that the fragmented particles (from a few tens to a few hundred micrometres) could not be detected as poly(2-hydroxyl methacrylate), the component of contact lenses, owing to changes in its chemical properties. After the degradation process, the median size of the contact lens particles decreased from 313 to 85 µm. Approximately 300,600 g of contact lens waste is discharged into sewage systems daily in the United States of America (USA), where 45 million people wear contact lenses and throw away one-fifth of them every day. Contact lens waste (1 g) has the potential to release 5653.3-17,773.3 particles of MPs. This implies that the currently reported MP amounts in the environmental matrix exclude significant amounts of MPs and NPs from discharged contact lenses. The identification method should be examined, and a registration of the disposal process should be established.

Microplastics in European sea salts - An example of exposure through consumer choice and of interstudy methodological discrepancies

Microplastics are contaminants of emerging concern, not least due to their global presence in marine surface waters. Unsurprisingly, microplastics have been reported in salts harvested from numerous locations. We extracted microplastics from 13 European sea salts through 30% H₂O₂ digestion and filtration over 5-µm filters. Filters were visually inspected at magnifications to x100. A subsample of potential microplastics was subjected to Raman spectroscopy. Particle mass was estimated, and human dose exposure calculated. After blank corrections, median concentrations were 466 ± 152 microplastics kg^-1 ranging from 74 to 1155 items kg^-1. Traditionally harvested salts contained fewer microplastics than most industrially harvested ones (t-test, p < 0.01). Approximately 14 µg of microplastics (< 12 particles) may be absorbed by the human body annually, of which a quarter may derive from a consumer choosing sea salt. We reviewed existing studies, showing that targeting different particle sizes and incomplete filtrations hinder interstudy comparison, indicating the importance of method harmonisation for future studies. Excess salt consumption is detrimental to human health; the hazardousness of ingesting microplastics on the other hand has yet to be shown. A portion of microplastics may enter sea salts through production processes rather than source materials.

Distribution characteristics of microplastics in soil of Loess Plateau in northwest China and their relationship with land use type

The widespread distribution of microplastics (MPs) in soil has aroused great concern. The land use type can affect the distribution characteristics of MPs, whereas the abundance of MPs in the Loess Plateau region and the influence of different land use types on it are unclear. This study checked into the distribution of MPs in the Loess Plateau region, studied the abundance of MPs in woodland, construction land, grassland and cultivated land, and analyzed the distribution characteristics of their shape, size, and color. The abundance of MPs in the Loess Plateau region reached 2982.34 items/kg, dominated by black, small size and fragment MPs. The order of average abundance of MPs was: cultivated land (3535 items/kg) > construction land (2809 items/kg) > woodland (2781 items/kg) > grassland (2658 items/kg). Fragment MPs were predominant in woodland, construction land and cultivated land, but film and fiber MPs were predominant in grassland. MPs in cultivated land and construction land mainly sourced from human activities, MPs in woodland and grassland were more likely to come from atmospheric deposition. Human activities and sunlight exposure can cause MPs to break down, while trees in woodland block rays of light, slowing MPs breakage to some extent. And the polymer type of MPs was mostly PE and the main ones were black. This study may provide important data for follow-up research on MPs in terrestrial ecosystems.

Microplastics in large marine animals stranded in the Republic of Korea

Microplastics (MPs) are found in every ocean and are frequently ingested by marine animals. This study analyzed MPs in the stomachs and intestines of 12 large marine animals comprising one fin whale (Balaenoptera physalus), seven finless porpoises (Neophocaena asiaeorientalis), two loggerhead turtles (Caretta caretta), one Indo-Pacific bottlenose dolphin (Tursiops aduncus), and one common dolphin (Delphinus delphis) that were stranded off the Republic of Korea between 2019 and 2021. MPs were detected with a mean abundance of 3.42 ± 3.2 items/g and were predominantly of transparent-white, fragment-shaped polypropylene smaller than 200 μm. The abundance of MPs found did not correlate with the biological information (maturity, body length) of the finless porpoises and there were no significant differences in the abundance of MPs between the stomachs and intestines. These results cannot accurately assess the impact of MPs on large marine animals, so further studies are necessary to understand how MPs can potentially affect them.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Microplastic pollution and human risk assessment in Turkish bottled natural and mineral waters

Microplastics (MPs), which arise from the deterioration of larger plastics that are frequently used in daily life and are smaller than 5 mm in size, are found in many environments and can pose a serious threat to human health. Humans ingest these microplastics unintendedly through drinking water. Although plastic pollution has been extensively investigated in a variety of water sources, research on MP contamination in bottled waters is scarce. Hence, in this study, the presence and distribution of MPs were investigated in 150 samples of bottled natural and mineral water brands in Türkiye. Using FTIR stereoscopy and stereomicroscope analysis, MPs were detected in 43 out of the 50 (86%) of these brands. Among the four types of polymers detected, the most abundant type was polyethylene (33%), polypropylene (31%), polyethylene terephthalate (25%), and polyamid (11%). In comparison to natural waters, mineral waters had larger average-sized particles (63.98 ± 4.06 vs. 104.83 ± 14.28 µm) and higher MP concentrations (4.6 ± 0.5 vs. 12.6 ± 1.6 particles/L). Although the most dominant shape was found as fiber in natural waters, fragments were more prevalent in mineral waters. The estimated daily intakes (EDI) for adults and children were expected to be 0.019 and 0.42 MP/kg/bw/day, respectively, in natural waters while EDI were 0.009 and 0.04 MP/kg/bw/day, respectively, in mineral waters. The results of the study suggest that the EDI and annual intake (EAI) are negligible when compared to other studies. The baseline data on MP contamination of bottled water provided in the present study may be significant and useful for researchers to have a better understanding of microplastic contamination exposure.

Recent insights into uptake, toxicity, and molecular targets of microplastics and nanoplastics relevant to human health impacts

Microplastics and nanoplastics (M-NPLs) are ubiquitous environmentally, chemically, or mechanically degraded plastic particles. Humans are exposed to M-NPLs of various sizes and types through inhalation of contaminated air, ingestion of contaminated water and food, and other routes. It is estimated that Americans ingest tens of thousands to millions of M-NPLs particles yearly, depending on socioeconomic status, age, and gender. M-NPLs have spurred interest in toxicology because of their abundance, ubiquitous nature, and ability to penetrate bodily and cellular barriers, producing toxicological effects in cells, tissues, organs, and organ systems. The present review paper highlights: (1) The current knowledge in understanding the detrimental effects of M-NPLs in mouse models and human cell lines, (2) cellular organelle localization of M-NPLs, and the underlying uptake mechanisms focusing on endocytosis, (3) the possible pathways involved in M-NPLs toxicity, particularly reactive oxygen species, nuclear factor-erythroid factor 2-related factor 2 (NRF2), Wnt/β-Catenin, Nuclear Factor Kappa B (NF-kB)-regulated inflammation, apoptosis, and autophagy signaling. We also highlight the potential role of M-NPLs in increasing the incubation time, spread, and transport of the COVID-19 virus. Finally, we discuss the future prospects in this field.

Adsorptive behavior of micro(nano)plastics through biochar: Co-existence, consequences, and challenges in contaminated ecosystems

The abundance of micro(nano)plastics in natural ecosystems is a crucial global challenge, as these small-sized plastic particles originate from land-based and marine-based activities and are widely present in marine, freshwater, and terrestrial ecosystems. Micro(nano)plastics can significantly be reduced through various methods, such as biological, chemical, and physical techniques. Biochar is a low-cost adsorbent and is considered an efficient material and its application is ecologically effective carbon-negative for remediation of organic and inorganic pollutants. Therefore, this review critically discusses the fate and transport of micro(nano)plastics and their interactions with different biochar in aqueous and column porous media. This review outlines the implications of biochar with the co-existence of micro(nano)plastics in efforts to understand their coupled effects on soil physicochemical properties, microbial communities, and plant growth, along with the removal of heavy metals and other toxic contaminants. In batch experiments, biochar synthesized from various biomasses such as corn straw, hardwood, pine and spruce bark, corncob, and Prosopis juliflora had shown high level of removal efficiency (>90 %) for microplastic adsorption under varying environmental conditions viz., pH, temperature, ionic strength, particle size, and dose due to chemical bonding and electrostatic attractions. Increased temperature of the aqueous solutions encouraged higher adsorption, while higher pH and dissolved organic matter and nutrients may show decreased adsorption capacities for micro(nano)plastics using biochar. Compared to other available physical, chemical, and biological methods, biochar-amended sand filters in column experiments have been very efficient in removing micro(nano)plastics. In saturated column porous media, various microplastics could be inhibited using biochar due to decreased electrostatic repulsion, steric hindrance, and competitive sorption due to humic acid, ionic strength, and cations. Finally, this review provides in-depth insights on further investigations and recommendations for overall micro(nano)plastics removal using biochar-based materials.

[Microplastic and dermatological care]

BACKGROUND

Synthetic polymers (plastics) from fossil resources are produced in large quantities and reach the environment as microplastics due to improper disposal and via various entry routes. This may lead to implications on flora, fauna, and humans.

OBJECTIVES

This article aims to provide a concise overview for dermatologists about this complex topic and how it relates to daily medical practice.

MATERIALS AND METHODS

We performed a selective literature review regarding microplastics and sustainability in dermatology in liaison with the collaborative research center on microplastics at the University of Bayreuth.

RESULTS

Primary and secondary microplastics are released into the environment on a large scale and accumulate in aquatic and terrestrial ecosystems. This may lead to their disruption and bears potential to create ecological niches for human pathogenic species. Humans and animals inhale and ingest microplastics, and the health consequences have not been sufficiently investigated. This is mainly because microplastics are not a homogenous group of substances, and potential effects depend on various properties (e.g., type of polymer, size, shape, additivation, surface charge). Dermatological care is resource intensive and contributes in various ways to this matter.

CONCLUSION

Plastics are currently indispensable in many fields. Nevertheless, physicians have the responsibility to prevent negative consequences for the health of society (precautionary principle). Extensive efforts are thus necessary for better sustainability; this includes medical care.

Facile nanoplastics formation from macro and microplastics in aqueous media

The immense production of plastic polymers combined with their discordancy with nature has led to vast plastic waste contamination across the geosphere, from the oceans to freshwater reservoirs, wetlands, remote snowpacks, sediments, air and multiple other environments. These environmental pollutants include microplastics (MP), typically defined as small and fragmented plastics less than 5 mm in size, and nanoplastics (NP), particles smaller than a micrometer. The formation of micro and nanoplastics in aqueous media to date has been largely attributed to fragmentation of plastics by natural (i.e., abrasion, photolysis, biotic) or industrial processes. We present a novel method to create small microplastics (≲ 5 μm) and nanoplastics in water from a wide variety of plastic materials using a small volume of a solubilizer liquid, such as n-dodecane, in combination with vigorous mixing. When the suspensions or solutions are subjected to ultrasonic mixing, the particle sizes decrease. Small micro- and nanoparticles were made from commercial, real world and waste (aged) polyethylene, polystyrene, polycarbonate and polyethylene terephthalate, in addition to other plastic materials and were analyzed using dark field microscopy, Raman spectroscopy and particle size measurements. The presented method provides a new and simple way to create specific size distributions of micro- and nanoparticles, which will enable expanded research on these plastic particles in water, especially those made from real world and aged plastics. The ease of NP and small MP formation upon initial mixing simulates real world environments, thereby providing further insight into the behavior of plastics in natural settings.

Effects of land use and landscape on the occurrence and distribution of microplastics in soil, China

Microplastic pollution in the soil environment has gathered widespread attention. However, little is known about the effects of land use and landscape patterns on the occurrence and distribution of microplastics in the soil. Herein, the microplastic pollution in different land uses (facility farmland, traditional farmland, orchard, grassland, and woodland) in Yuanmou County, Yunnan Province was investigated. The results showed that the abundance of microplastic ranged from 50.000 to 3450.0 items·kg^-1, with an average abundance of 595.00 ± 740.00 items·kg^-1 and a median of 375.00 items·kg^-1. Microplastics were found to primarily be green-coloured (28.4 %), fragment (72.7 %) in shape, <1 mm (75.7 %) in size, and composed of polypropylene (51.4 %). There were significant differences in the abundance and characteristics of the microplastics between different land use types. Microplastic abundance in facility farmlands, traditional farmlands, and orchard lands was significantly higher than that of grasslands and woodlands (p < 0.05). The main shape of the microplastics in facility farmlands, traditional farmlands, and orchards was fragments and it was fibers in grasslands and woodlands. The median particle size of microplastics in facility farmlands (539.50 μm) and traditional farmlands (574.00 μm), was smaller than those in the orchard (737.60 μm), grasslands (697.60 μm), and woodlands (1239.4 μm). Discrepancies among different land uses may be due to various reasons, such as different pollution sources and the weathering degree of microplastics. The results of the redundancy analysis showed that the microplastic abundance was negatively correlated with the largest patch index. It also showed that microplastic pollution was closely related to human activities. This study provides an important basis for further research on microplastic ecosystem risks that are associated with land use and provides a data basis for formulating effective prevention and control strategies and measures to mitigate soil microplastic pollution.

Removal of nanoplastics in water treatment processes: A review

Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.

Revealing Trace Nanoplastics in Food Packages─An Electrochemical Approach Facilitated by Synergistic Attraction of Electrostatics and Hydrophobicity

Most food packages are made of plastics, nanoplastics released from which can be directly ingested and induce serious damage to organisms. Therefore, it is urgent to develop an effective and convenient method for nanoplastic determinations in food packages. In this work, we present a sandwich-based electrochemical strategy for nanoplastic determination. Positively charged Au nanoparticles were coated onto a Au electrode to selectively capture negatively charged nanoplastics in an aqueous environment. Subsequently, the nanoplastics were recognized by the signal molecule ferrocene via the hydrophobic interaction and determined by differential pulse voltammetry. Our sandwich-type detection depends on both electronegativity and hydrophobicity of nanoplastics, which make the method applicable for the assays of packages made of widely commercialized polystyrene (PS), polypropylene (PP), polyethylene (PE), and polyamide (PA). The method displays different sensitivities to above four nanoplastics but the same dynamic range from 1 to 100 μg·L^-1. Based on it, the nanoplastics released from several typical food packages were assayed. Teabags were revealed with significant nanoplastic release, while instant noodle boxes, paper cups, and take-out boxes release slightly. The good recoveries in nanoplastic-spiked samples confirm the accuracy and applicability of this method. This work provides a sensitive, low-cost, and simple method without complicated instruments and pretreatment, which is of great significance for the determination of nanoplastics released from food packages.

Modifications of microplastics in urban environmental management systems: A review

Microplastics (MPs) are a worldwide environmental pollution issue. Besides the natural environmental stresses, various treatments in urban environmental management systems induce modifications on MPs, further affecting their environmental behavior. Investigating these modifications and inherent mechanisms is crucial for assessing the environmental impact and risk of MPs. In this review, up-to-date knowledge regarding the modifications of MPs in urban environmental management systems was summarized. Variations of morphology, chemical composition, hydrophilicity and specific surface area of MPs were generalized. The aging and degradation of MPs during drinking water treatment, wastewater treatment, sewage sludge treatment and solid waste treatment were investigated. A high abundance of MPs occurred in sewage sludge and aging solid waste, while digestion and composting contributed to significant decomposition and reduction of MPs. These treatments have become converters for MPs before entering the environment. Several novel technologies for MPs removal were listed; However, no appropriate methods can be put into actual application by now, except the membrane separation. The corresponding effects of degradation on the behaviors of MPs, including adsorption, sinking and contaminant leakage, were discussed. Finally, three priorities for research were proposed. This critical review provides viewpoints and references for risk evaluation of MPs after treatments in urban environmental management systems.

Fabrication of Nylon-6 and Nylon-11 Nanoplastics and Evaluation in Mammalian Cells

Microplastics (MPs) and nanoplastics (NPs) exist in certain environments, beverages, and food products. However, the ultimate risk and consequences of MPs and NPs on human health remain largely unknown. Studies involving the biological effects of small-scale plastics have predominantly used commercially available polystyrene beads, which cannot represent the breadth of globally dominant plastics. Nylon is a commodity plastic that is used across various industry sectors with substantial global production. Here, a series of well-characterized nylon-11 and nylon-6 NPs were successfully fabricated with size distributions of approximately 100 nm and 500 nm, respectively. The facile fabrication steps enabled the incorporation of fluorescent tracers in these NPs to aid the intracellular tracking of particles. RAW 264.7 macrophages were exposed to nylon NPs in a dose-dependent manner and cytotoxic concentrations and cellular uptake were determined. These well-characterized nylon NPs support future steps to assess how the composition and physicochemical properties may affect complex biological systems and ultimately human health.

Micro(nano)plastics pollution and human health: How plastics can induce carcinogenesis to humans?

Microplastics (MPs) and nanoplastics (NPs) are key indicators of the plasticine era, widely spread across different ecosystems. MPs and NPs become global stressors due to their inherent physicochemical characteristics and potential impact on ecosystems and humans. MPs and NPs have been exposed to humans via various pathways, such as tap water, bottled water, seafood, beverages, milk, fish, salts, fruits, and vegetables. This paper highlights MPs and NPs pathways to the food chains and how these plastic particles can cause risks to human health. MPs have been evident in vivo and vitro and have been at health risks, such as respiratory, immune, reproductive, and digestive systems. The present work emphasizes how various MPs and NPs, and associated toxic chemicals, such as polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), impact human health. Polystyrene (PS) and polyvinyl chloride (PVC) are common MPs and NPs, reported in human implants via ingestion, inhalation, and dermal exposure, which can cause carcinogenesis, according to Agency for Toxic Substances and Disease Registry (ATSDR) reports. Inhalation, ingestion, and dermal exposure-response cause genotoxicity, cell division and viability, cytotoxicity, oxidative stress induction, metabolism disruption, DNA damage, inflammation, and immunological responses in humans. Lastly, this review work concluded with current knowledge on potential risks to human health and knowledge gaps with recommendations for further investigation in this field.