Efficient Hydrogen Peroxide Generation Utilizing Photocatalytic Oxygen Reduction at a Triphase Interface

A Review on Photocatalytic Hydrogen Peroxide Production from Oxygen: Material Design, Mechanisms, and Applications

Hydrogen peroxide (H2O2) finds extensive applications in various industries, particularly in the environmental field. The photocatalytic production of H2O2 through the oxygen reduction reaction (ORR) or the water oxidation reaction (WOR) offers a promising approach. However, several challenges hinder effective on-site production, such as the rapid electron-hole pair recombination, inefficient visible light utilization, and limited selectivity in H2O2 formation. Thus, developing efficient photocatalysts to overcome these challenges is crucial. This review comprehensively outlines the development of photocatalysts and their modification techniques. It also summarizes and compares the H2O2 yield and apparent quantum yield among various photocatalysts with and without the use of organic sacrificial reagents. Density functional theory (DFT) calculations propose the band structure of photocatalysts and the mechanisms underlying oxygen reduction to H2O2. Finally, this review explores the potential environmental applications of photocatalytically produced H2O2. This review guides the design and optimization of photocatalysts, facilitating the continued advancement and application of photocatalysts in environmental contexts.

Advanced strategies for controlling three-phase boundaries in photocatalysis

This review delves into the latest advancements in controlling three-phase boundaries (TPBs) in photocatalytic systems, with a focus on photo(electro)catalytic processes for nitrogen reduction, oxygen reduction, and water reduction. We critically analyze various strategies and advanced materials designed to enhance TPB performance, evaluating their impact on catalytic efficiency and identifying gaps in the existing literature. By examining sophisticated triphasic systems that integrate superwetting materials, we emphasize their essential role in improving light absorption, charge separation, and mass transfer. Key challenges in TPB optimization are discussed, and future research directions are proposed to advance photocatalytic technologies for sustainable energy applications. This review highlights the crucial importance of TPBs in photo(electro)catalysis, aiming to inspire further innovation for more efficient and scalable solutions.

Photocatalytic Generation of H2O2 Via a Hydrogen-Abstraction Pathway by Bi2.15WO6 under Visible Light

Photocatalytic technology is a popular research area for converting solar energy into environmentally friendly chemicals and is considered the greenest approach for producing H2O2. However, the corresponding reactive oxygen species (ROS) and pathway involved in the photocatalytic generation of H2O2 by the Bi2.15WO6-glucose system are still not clear. Quenching experiments have established that neither •OH nor h+ contribute to the formation of H2O2, and show that the formed surface superoxo (≡Bi-OO•) and peroxo (≡Bi-OOH) species are the predominant ROS in H2O2 generation. In addition, various characterizations indicate the enhanced electron-transfer on the surface of Bi2.15WO6 with increasing contents of glucose via the ligand-to-metal charge transfer pathway, confirming H-transfer from glucose to ≡Bi-OO• or ≡Bi-OOH. The increased production of H2O2 with decreasing bond dissociation energy (BDEO-H) values of various phenolic compounds again supports the H-transfer mechanism from phenolic compounds to ≡Bi-OO• and then to ≡Bi-OOH. DFT calculations further reveal that on the Bi2.15WO6 surface, oxygen is sequentially reduced to ≡Bi-OO• and ≡Bi-OOH, while H-transfer from H2O or glucose to ≡Bi-OO• and ≡Bi-OOH, resulting in the production of H2O2. The lower energy barrier of H-transfer from adsorbed glucose (0.636 eV) than that from H2O (1.157 eV) indicates that H-transfer is more favorable from adsorbed glucose. This work gives new insight into the photocatalytic generation of H2O2 by Bi2.15WO6 in the presence of glucose/phenolic compounds via the H-abstraction pathway.

Antimicrobial and Antifouling Effects of Petal-Like Nanostructure by Evaporation-Induced Self-Assembly for Personal Protective Equipment

Although the personal protective equipment (PPE) used by healthcare workers (HCWs) effectively blocks hazardous substances and pathogens, it does not fully rule out the possibility of infection, as pathogens surviving on the fabric surface pose a substantial risk of cross-infection through unintended means. Therefore, PPE materials that exhibit effective biocidal activity while minimizing contamination by viscous body fluids (e.g., blood and saliva) and pathogen-laden droplets are highly sought. In this study, petal-like nanostructures (PNSs) are synthesized through the vertical rearrangement of colloidal lamellar bilayers via evaporation-induced self-assembly of octadecylamine, silica-alumina sol, and diverse photosensitizer. The developed method is compatible with various fabrics and imparts visible-light-activated antimicrobial and superhydrophobic-based antifouling activities. PNS-coated fabrics could provide a high level of protection and effectively block pathogen transmission as exemplified by their ability to roll off viscous body fluids reducing bacterial droplet adhesion and to inactivate various microorganisms. The combination of antifouling and photobiocidal activities results in the complete inactivation of sprayed pathogen-laden droplets within 30 min. Thus, this study paves the way for effective contagious disease management and the protection of HCWs in general medical environments, inspiring further research on the fabrication of materials that integrate multiple useful functionalities.

Microdroplet assisted hollow ZnCdS@PDA nanocages' synergistic confinement effect for promoting photocatalytic H2O2 production

Solar-driven photocatalytic H2O2 production is greatly impeded by the slow mass transfer and rapid recombination of photogenerated charge carriers for multiphase reactions. Polydopamine (PDA)-coated hollow ZnCdS (ZnCdS@PDA) octahedral cages with sulfur vacancies were constructed as micro-reactors to provide a delimited micro-environment for highly efficient paired H2O2 production through water oxidation coupled with oxygen reduction. At neutral pH, hollow ZnCdS@PDA cages exhibited a high H2O2 production yield of 45.5 mM g-1 h-1 without the assistance of sacrificial agents in bulk solution, which can be attributed to the distinguished space constraint in hollow nanocages and a surprisingly adjusted band structure. Compared to the bulk water system, H2O and O2 inside the hollow nanocage can form an ideal system for boosting such nanoconfined H2O or O2 molecules' adsorption/enrichment on the interior of the ZnCdS active sites. More importantly, the photocatalytic yield of H2O2 generation (H2O2 concentrations of 190-65.6 mM g-1 h-1) obtained in the abundant gas-liquid interface of microdroplets is dramatically higher than that obtained in an aqueous bulk environment under visible light conditions without using sacrificial agents. This enhancement can be attributed to the synergistic effect of the hollow ZnCdS@PDA nanocage reactor and the microdroplet confinement photocatalysis reaction. Particularly, the improved/confined enhancement of O2 availability and enhanced charge separation, along with high catalytic durability are the main reasons leading to significant H2O2 production due to an ultrahigh interfacial electric field and an extremely large specific surface area in microdroplets. In addition to producing a highly concentrated liquid of hydrogen peroxide during the microdroplet photoreaction, we also obtained white solid hydrogen peroxide powder with strong oxidizing properties reducing costs and increasing safety in storage and transportation. This study highlights that nano-liquid catalysis (using microdroplets) provides a very efficient pathway for accelerating semiconductor photocatalysis limited by gas diffusion in a liquid.

Photocatalytic H2 O2 Generation Reaction with a Benchmark Rate at Air-Liquid-Solid Joint Interfaces

The rapid charge recombination, low selectivity for two-electron oxygen reduction reaction (ORR), and limited O2 diffusion rate hinder the practical applications of photocatalytic H2 O2 generation. Herein, a triphase photocatalytic system in which the H2 O2 generation occurs at the air-liquid-solid joint interfaces is developed, using polymeric carbon nitride (PCN). The introduction of pyrrole units and cyano group into PCN can promote the activation of oxygen molecules and facilitate the spatial separation of HOMO and LUMO orbits, hence improving the charge carrier separation efficiency and enhancing the formation of H2 O2 . Importantly, the gas-liquid-solid triphase interface system allows for the rapid transport of oxygen from the air to the reaction interface, overcoming the low solubility and slow diffusion of oxygen in the water in conventional liquid reaction systems. The triphase system shows a benchmark H2 O2 generation rate over PCN-based materials in pure water (2063.21 µmol g-1 h-1 ), which is an approximate tenfold enhancement as compared to powder photocatalyst (215.44 µmol g-1 h-1 ). Simulation and electrochemical tests reveal that the rapid oxygen diffusion rate of triphase interface can promote charge separation and provide more O2 to generate H2 O2 . This work provides a promising strategy for constructing an efficient and sustainable H2 O2 production system.

Triple-Phase Photocatalytic H2O2 Production on a Janus Fiber Membrane with Asymmetric Hydrophobicity

Photocatalytic O2 reduction is an intriguing approach to producing H2O2, but its efficiency is often hindered by the limited solubility and mass transfer of O2 in the aqueous phase. Here, we design and fabricate a two-layered (2L) Janus fiber membrane photocatalyst with asymmetric hydrophobicity for efficient photocatalytic H2O2 production. The top layer of the membrane consists of superhydrophobic polytetrafluoroethylene (PTFE) fibers with a dispersed modified carbon nitride (mCN) photocatalyst. Amphiphilic Nafion (Naf) ionomer is sprayed onto this layer to modulate the microenvironment and achieve moderate hydrophobicity. In contrast, the bottom layer consists of bare PTFE fibers with high hydrophobicity. The elaborate structural configuration and asymmetric hydrophobicity feature of the optimized membrane photocatalyst (designated as 2L-mCN/F-Naf; F, PTFE) allow most mCN to be exposed with gas-liquid-solid triple-phase interfaces and enable rapid mass transfer of gaseous O2 within the hierarchical membrane, thus increasing the local O2 concentration near the mCN photocatalyst. As a result, the optimized 2L-mCN/F-Naf membrane photocatalyst shows remarkable photocatalytic H2O2 production activity, achieving a rate of 5.38 mmol g-1 h-1 under visible light irradiation.

Synergy of Bulk Defects and Surface Defects on TiO2 for Highly Efficient Photocatalytic Production of H2O2

Artificial photosynthesis of H2O2 by TiO2-based semiconductors is a promising approach for H2O2 production. However, the efficiency of pristine TiO2 is still limited by rapid charge separation and low O2 adsorption capacity. Here, we found that the synergy between bulk and surface defects on TiO2 could overcome this demanding bottleneck. The introduced bulk defects act as hole acceptors to induce directional hole transfer, efficiently boosting electron-hole separation. Furthermore, the adsorption of O2 is strengthened by the introduced surface defects. Consequently, this synergy of bulk and surface defects on TiO2 significantly improves the photocatalytic performance, with a H2O2 production rate of 4560 μmol h-1 g-1, outperforming most reported TiO2-based photocatalysts. This work not only provides a new insight into the mechanism of surface/bulk defects in photocatalysis but also highlights that surface/bulk regulation holds great promise for achiveing efficient photocatalytic conversion.

Synthesis of efficient light harvesting Cr, N Co-doped TiO2 nanoparticles for enhanced visible light photocatalytic degradation of xanthene dyes; eosin yellow and rose bengal

To solve the problem of water pollution, using environment friendly and cost effective method in short time is the need of hour. In this work, chromium (Cr) and nitrogen (N) co-doped TiO2 nanoparticles were synthesized and were used for the photocatalytic degradation of dyes under visible light. The synergistic effect of metal and non-metal co-dopants added would result in appropriate reduction of band gap {from 3.2 eV of TiO2 to 2.67 eV}, decrease in recombination rate of charge carriers by trapping electrons and holes, and in better light harvesting capacity. Nanoparticles were synthesized by sol-gel method and characterized using ultraviolet-visible (UV-VIS) spectroscopy, fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), zeta potential, X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, field emission scanning electron microscopy (FE-SEM), and RAMAN spectroscopy. Eosin yellow (EY) and rose bengal (RB) were subjected to photocatalytic degradation under solar light to check the photocatalytic activity of the synthesized nanoparticles. Effects of dye concentration, the concentration of nanoparticles, time, and pH were investigated to optimize the parameters. The results obtained were remarkable for 20 ppm EY solution took 10 min using 1 gL-1 NPs at pH 3 and 10 ppm RB solution took 5 min using 0.75 gL-1 NPs at pH 5.78 (original pH) for complete degradation. Kinetics studies were also performed and both dyes followed pseudo-second-order kinetics with R2 values 0.99312 and 0.99712 for EY and RB, respectively. The study of degraded products was conducted using high-performance liquid chromatography (HPLC) hyphenated with electron spray ionization mass spectroscopy (ESI-MS) (LC-MS) and possible degradation pathways were made for both dyes. A reusability test was also performed showing the efficiency of the particles was up to 88% after 3 cycles of use. These notable results can be attributed to the efficient removal of organic pollutants using the proposed dopants in this study.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Photocatalytic and Electrocatalytic Generation of Hydrogen Peroxide: Principles, Catalyst Design and Performance

Hydrogen peroxide (H2O2) is a high-demand organic chemical reagent and has been widely used in various modern industrial applications. Currently, the prominent method for the preparation of H2O2 is the anthraquinone oxidation. Unfortunately, it is not conducive to economic and sustainable development since it is a complex process and involves unfriendly environment and potential hazards. In this context, numerous approaches have been developed to synthesize H2O2. Among them, photo/electro-catalytic ones are considered as two of the most promising manners for on-site synthesis of H2O2. These alternatives are sustainable in that only water or O2 is required. Namely, water oxidation (WOR) or oxygen reduction (ORR) reactions can be further coupled with clean and sustainable energy. For photo/electro-catalytic reactions for H2O2 generation, the design of the catalysts is extremely important and has been extensively conducted with an aim to obtain ultimate catalytic performance. This article overviews the basic principles of WOR and ORR, followed by the summary of recent progresses and achievements on the design and performance of various photo/electro-catalysts for H2O2 generation. The related mechanisms for these approaches are highlighted from theoretical and experimental aspects. Scientific challenges and opportunities of engineering photo/electro-catalysts for H2O2 generation are also outlined and discussed.

Significantly Accelerated Hydroxyl Radical Generation by Fe(III)-Oxalate Photochemistry in Aerosol Droplets

Fe(III)-oxalate complexes are ubiquitous in atmospheric environments, which can release reactive oxygen species (ROS) such as H₂O₂, O^•2-, and OH^• under light irradiation. Although Fe(III)-oxalate photochemistry has been investigated extensively, the understanding of its involvement in authentic atmospheric environments such as aerosol droplets is far from enough, since the current available knowledge has mainly been obtained in bulk-phase studies. Here, we find that the production of OH^• by Fe(III)-oxalate in aerosol microdroplets is about 10-fold greater than that of its bulk-phase counterpart. In addition, in the presence of Fe(III)-oxalate complexes, the rate of photo-oxidation from SO₂ to sulfate in microdroplets was about 19-fold faster than that in the bulk phase. The availability of efficient reactants and mass transfer due to droplet effects made dominant contributions to the accelerated OH^• and SO₄^2- formation. This work highlights the necessary consideration of droplet effects in atmospheric laboratory studies and model simulations.

Solid-liquid-gas reaction accelerated by gas molecule tunnelling-like effect

Solid-liquid-gas reactions are ubiquitous and are encountered in both nature and industrial processes^1-4. A comprehensive description of gas transport in liquid and following reactions at the solid-liquid-gas interface, which is substantial in regard to achieving enhanced triple-phase reactions, remains unavailable. Here, we report a real-time observation of the accelerated etching of gold nanorods with oxygen nanobubbles in aqueous hydrobromic acid using liquid-cell transmission electron microscopy. Our observations reveal that when an oxygen nanobubble is close to a nanorod below the critical distance (~1 nm), the local etching rate is significantly enhanced by over one order of magnitude. Molecular dynamics simulation results show that the strong attractive van der Waals interaction between the gold nanorod and oxygen molecules facilitates the transport of oxygen through the thin liquid layer to the gold surface and thus plays a crucial role in increasing the etching rate. This result sheds light on the rational design of solid-liquid-gas reactions for enhanced activities.

Interfacial wettability and mass transfer characterizations for gas-liquid-solid triple-phase catalysis

Heterogeneous catalysis is inseparable from interfacial mass transfer and chemical reaction processes determined by the structure and microenvironment. Different from high-temperature thermochemical processes, photo- and electrocatalysis operated at mild conditions often involve both gas and liquid phases, making it important but challenging to characterize the reaction process typically occurring at the gas-liquid-solid interface. Herein, we review the scope, feasibility, and limitation of ten types of currently available technologies used to characterize interfacial wettability and mass transfer properties of various triple-phase catalytic reactions. The review summarizes techniques from macroscopic contact angle measurement to microscopic environment electron microscopy for investigating the wettability-controlled structure of triple-phase interfaces. Experimental and computational methods in revealing the interfacial mass transfer process have also been systematically discussed, followed by a perspective on the opportunities and challenges of advanced characterization methods to help understand the fundamental reaction mechanism of triple-phase catalysis.

Three-phase interface photocatalysis for the enhanced degradation and antibacterial property

Semiconductor photocatalysis, as a means of utilizing stranded renewable solar resources, is now emerging as a viable and promising approach for increasingly severe water pollution. In this work, a high-performance photocatalytic system has been fabricated by immobilizing spiky TiO₂/Au nanohybrids on one side of hydrophobic nanoPE substrate (PE-TiO₂/Au) that forces the enabling of air-liquid-solid triphase photocatalytic interface. Such a triphase system allows efficient oxygen access to the photocatalyst surface, which is feasible for charge separation and reactive oxygen species (ROS) production. Two modes of triphase systems with different gas flow paths were constructed, in which PE-TiO₂/Au was floating on the aqueous solution surface (exposed mode) or immersing in aqueous phase (immersed mode). It is worth mentioning that the exposed PE-TiO₂/Au enables a more efficient oxygen supply, thus leading to a 5.5-fold and 1.8-fold higher reaction kinetics as compared to normal liquid-solid diphase system and immersed PE-TiO₂/Au. Meanwhile, PE-TiO₂/Au also exerts bactericidal effect under visible light irradiation, which effectively inactivates S.aureus (>99.9%) in a lean period of 30 min. The qualities of high lethality rate and short reaction time are endowed to PE-TiO₂/Au due to the co-effect of unique triphase interface microenvironment and elaborate heterojunction of spiky TiO₂/Au nanohybrids. In this paper, we have revealed for the first time that the antibacterial efficiency can be effectively improved by increasing the oxygen supply with the construction of three-phase interface, which represents a promising option in designing highly efficient photocatalytic systems for sewage purification applications.

The Solvent Effect on H2 O2 Generation at Room Temperature Ionic Liquid|Water Interface

H₂ O₂ is a versatile chemical and can be generated by the oxygen reduction reaction (ORR) in proton donor solution in molecular solvents or room temperature ionic liquids (IL). We investigated this reaction at interfaces formed by eleven hydrophobic ILs and acidic aqueous solution as a proton source with decamethylferrocene (DMFc) as an electron donor. H₂ O₂ is generated in colorimetrically detectable amounts in biphasic systems formed by alkyl imidazolium hexafluorophosphate or tetraalkylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. H₂ O₂ fluxes were estimated close to liquid|liquid interface by scanning electrochemical microscopy (SECM). Contrary to the interfaces formed by hydrophobic electrolyte solution in a molecular solvent, H₂ O₂ generation is followed by cation expulsion to the aqueous phase. Weak correlation between the H₂ O₂ flux and the difference between DMFc/DMFc⁺ redox potential and 2 electron ORR standard potential indicates kinetic control of the reaction.

Super-spreading on superamphiphilic micro-organized nanochannel anodic aluminum oxide surfaces for heat dissipation

Nature-inspired superamphiphilic surfaces have drawn tremendous attention owing to its extreme liquid-loving behaviors. Herein, a micro-organized nano-channel (Mo-Na) superamphiphilic anodic aluminum oxide (AAO) surface with long-lasting superamphiphilic property is prepared by a facile one-step anodization method with controllable temperature change. Analysis of dynamic wetting behaviors on superamphiphilic Mo-Na AAO surfaces for various liquids reveals that the spreading factor is in negative correlation with the surface tension and liquid polarity. Detailed observation of the three-phase contact line shows a micro-scale capillary film on superamphiphilic Mo-Na AAO surfaces, which results from the horizontal component of the capillary force. Taking advantage of the superamphiphilic property, water droplets can spread completely on these Mo-Na AAO surfaces within a short time, which can be applied for efficient heat dissipation. Moreover, the unique AAO surface with Mo-Na structures also offers an effective template for future efforts in AAO-based composite devices.

Intensification of Heterogeneous Photocatalytic Reactions Without Efficiency Losses: The Importance of Surface Catalysis

Advances in LED and photoreactor technology have brought semiconductor photocatalysis to the verge of feasibility of industrial application for the synthesis of value-added chemicals. However, the often observed efficiency losses under intensified illumination conditions still present a great challenge. This perspective discusses the origin of these efficiency losses and what needs to be done to prevent or counteract it and pave the way for efficient, intensified heterogeneous photocatalytic processes. The role of surface catalysis is particularly highlighted as one of the rate-limiting steps.

Graphic Abstract

Carbon-based materials for photo- and electrocatalytic synthesis of hydrogen peroxide

The high demand for hydrogen peroxide (H₂O₂) has been dominantly supplied by the anthraquinone process for various applications globally, including chemical synthesis and wastewater treatment. However, the centralized manufacturing and intensive energy input and waste output are significant challenges associated with this process. Accordingly, the on-site production of H₂O₂via electro- and photocatalytic water oxidation and oxygen reduction partially is greener and easier to handle and has recently emerged with extensive research aiming to seek active, selective and stable catalysts. Herein, we review the current status and future perspectives in this field focused on carbon-based catalysts and their hybrids, since they are relatively inexpensive, bio-friendly and flexible for structural modulation. We present state-of-the-art progress, typical strategies for catalyst engineering towards selective and active H₂O₂ production, discussion on electro- and photochemical mechanisms and H₂O₂ formation through both reductive and oxidative reaction pathways, and conclude with the key challenges to be overcome. We expect promising developments would be inspired in the near future towards practical decentralized H₂O₂ production and its direct use.

Improving Artificial Photosynthesis over Carbon Nitride by Gas-Liquid-Solid Interface Management for Full Light-Induced CO2 Reduction to C1 and C2 Fuels and O2

The activity and selectivity of simple photocatalysts for CO2 reduction remain limited by the insufficient photophysics of the catalysts, as well as the low solubility and slow mass transport of gas molecules in/through aqueous solution. In this study, these limitations are overcome by constructing a triphasic photocatalytic system, in which polymeric carbon nitride (CN) is immobilized onto a hydrophobic substrate, and the photocatalytic reduction reaction occurs at a gas-liquid-solid (CO2 -water-catalyst) triple interface. CN anchored onto the surface of a hydrophobic substrate exhibits an approximately 7.2-fold enhancement in total CO2 conversion, with a rate of 415.50 μmol m-2  h-1 under simulated solar light irradiation. This value corresponds to an overall photosynthetic efficiency for full water-CO2 conversion of 0.33 %, which is very close to biological systems. A remarkable enhancement of direct C2 hydrocarbon production and a high CO2 conversion selectivity of 97.7 % are observed. Going from water oxidation to phosphate oxidation, the quantum yield is increased to 1.28 %.

Enhanced catalytic reaction at an air-liquid-solid triphase interface

Gaseous reactant involved heterogeneous catalysis is critical to the development of clean energy, environmental management, health monitoring, and chemical synthesis. However, in traditional heterogeneous catalysis with liquid–solid diphase reaction interfaces, the low solubility and slow transport of gaseous reactants strongly restrict the reaction efficiency. In this minireview, we summarize recent advances in tackling these drawbacks by designing catalytic systems with an air–liquid–solid triphase joint interface. At the triphase interface, abundant gaseous reactants can directly transport from the air phase to the reaction centre to overcome the limitations of low solubility and slow transport of the dissolved gas in liquid–solid diphase reaction systems. By constructing a triphase interface, the efficiency and/or selectivity of photocatalytic reactions, enzymatic reactions, and (photo)electrochemical reactions with consumption of gaseous reactants oxygen, carbon dioxide, and nitrogen are significantly improved.

Gaseous reactant involved liquid–solid diphase interface reactions can be significantly enhanced using rationally designed and constructed air–liquid–solid triphase systems.