Over 14% Efficiency Folding-Flexible ITO-free Organic Solar Cells Enabled by Eco-friendly Acid-Processed Electrodes

Advances in Stretchable Organic Photovoltaics: Flexible Transparent Electrodes and Deformable Active Layer Design

Stretchable organic photovoltaics (OPVs) have attracted significant attention as promising power sources for wearable electronic systems owing to their superior robustness under repetitive tensile strains and their good compatibility. However, reconciling a high power-conversion efficiency and a reasonable flexibility is a tremendous challenge. In addition, the development of stretchable OPVs must be accelerated to satisfy the increasing requirements of niche markets for mechanical robustness. Stretchable OPV devices can be classified as either structurally or intrinsically stretchable. This work reviews recent advances in stretchable OPVs, including the design of mechanically robust transparent electrodes, photovoltaic materials, and devices. Initially, an overview of the characteristics and recent research progress in the areas of structurally and intrinsically stretchable OPVs is provided. Subsequently, research into flexible and stretchable transparent electrodes that directly affect the performances of stretchable OPVs is summarized and analyzed. Overall, this review aims to provide an in-depth understanding of the intrinsic properties of highly efficient and deformable active materials, while also emphasizing advanced strategies for simultaneously improving the photovoltaic performance and mechanical flexibility of the active layer, including material design, multi-component settings, and structural optimization.

Mechanically Stable Flexible Organic Photovoltaics with Silver Nanomesh for Indoor Applications

Enhanced device performance of flexible organic solar cells (FOSCs) was achieved according to the development of organic solar cells (OSCs). OSCs are promising candidates as energy sources for low-power supply systems such as the Internet of Things (IoT) under indoor lighting environments. To apply FOSCs to flexible or wearable applications, they must be mechanically stable. In this study, we fabricated FOSCs with silver nanomesh (AgNM) as the bottom transparent conductive electrode (TCE). Instead of indium tin oxide (ITO), AgNMs were prepared using three pitches of 25, 50, and 100 μm with a square pattern, using a poly(ethylene terephthalate) (PET) substrate. Notably, the device using AgNMs with a pitch of 25 μm exhibited a power conversion efficiency (PCE) of 14.93% under 1 sun illumination and 17.91% under 1000 lux of light-emitting diode (LED) light conditions. Flexible devices using AgNMs maintained over 92% of their initial PCE under 1 sun illumination (PCE decreased to 12.98 from 14.04%) and over 92% when tested under 1000 lux of LED light illumination (PCE decreased to 16.57 from 17.91%) after 1000 instances of bending. These results demonstrate the advantages of using AgNMs as an alternative TCE under both 1 sun and indoor lightning environments and are promising candidates for flexible applications.

Nanostructured Conductive Polypyrrole for Antibacterial Components in Flexible Wearable Devices

The power generated by flexible wearable devices (FWDs) is normally insufficient to eradicate bacteria, and many conventional antibacterial strategies are also not suitable for flexible and wearable applications because of the strict mechanical and electrical requirements. Here, polypyrrole (PPy), a conductive polymer with a high mass density, is used to form a nanostructured surface on FWDs for antibacterial purposes. The conductive films with PPy nanorods (PNRs) are found to sterilize 98.2 ± 1.6% of Staphylococcus aureus and 99.6 ± 0.2% of Escherichia coli upon mild electrification (1 V). Bacteria killing stems from membrane stress produced by the PNRs and membrane depolarization caused by electrical neutralization. Additionally, the PNR films exhibit excellent biosafety and electrical stability. The results represent pioneering work in fabricating antibacterial components for FWDs by comprehensively taking into consideration the required conductivity, mechanical properties, and biosafety.

Hydrogen bonding-induced high-performance stretchable organic semiconductors: a Review

Semiconductors are widely used in electron devices. With the development of wearable soft-electron devices, conventional inorganic semiconductors are unable to meet the demand because of their high rigidity and high cost. Thus, scientists construct organic semiconductors with high charge mobility, low cost, eco-friendly, stretchable, etc. Due to the excellent performance of stretchable organic semiconductors, they can be widely used as wearable soft-electron devices, such as stretchable organic field-effect transistors (OFETs), organic solar cells (OSCs), etc. Contains flexible display devices and flexible power sources, which are of great interest for applications of future electron devices. However, there are still some challenges that need to be solved. Commonly, enhancing the stretchability may cause the degradation of charge mobility, because of the destruction of the conjugated system. Currently, scientists find that hydrogen bonding can enhance the stretchability of organic semiconductors with high charge mobility. Thus in this review, based on the structure and design strategies of hydrogen bonding, various hydrogen bonding induced stretchable organic semiconductors are introduced. In addition, the applications of the hydrogen bonding induced stretchable organic semiconductors are reviewed. Finally, the stretchable organic semiconductors design concept and potential evolution trends are discussed. The final goal is to outline a theoretical scaffold for the design of high-performance wearable soft-electron devices, which can also further advance the development of stretchable organic semiconductors for applications.

Material Design and Device Fabrication Strategies for Stretchable Organic Solar Cells

Recent advances in the power conversion efficiency (PCE) of organic solar cells (OSCs) have greatly enhanced their commercial viability. Considering the technical standards (e.g., mechanical robustness) required for wearable electronics, which are promising application platforms for OSCs, the development of fully stretchable OSCs (f-SOSCs) should be accelerated. Here, a comprehensive overview of f-SOSCs, which are aimed to reliably operate under various forms of mechanical stress, including bending and multidirectional stretching, is provided. First, the mechanical requirements of f-SOSCs, in terms of tensile and cohesion/adhesion properties, are summarized along with the experimental methods to evaluate those properties. Second, essential studies to make each layer of f-SOSCs stretchable and efficient are discussed, emphasizing strategies to simultaneously enhance the photovoltaic and mechanical properties of the active layer, ranging from material design to fabrication control. Key improvements to the other components/layers (i.e., substrate, electrodes, and interlayers) are also covered. Lastly, considering that f-SOSC research is in its infancy, the current challenges and future prospects are explored.

Mechanically and Ultraviolet Light Stable Ultrathin Organic Solar Cell via Semi-Embedding Silver Nanowires in a Hydrogen Bonds-Based Polyimide

Ultrathin organic solar cells (OSCs) with both high power conversion efficiency (PCE) and operational stability are of great significance for the industrial applications but still challenging. Here, we synthesized a polyimide (PI) substrate for high-performance and stable ultrathin OSCs, which was physically crosslinked via strong hydrogen bonds (denoted as HB-PI) to enhance the mechanical, thermal, solvent-resistant, and UV filtering properties (with a cut-off wavelength of 376 nm). An ultrathin flexible transparent composite electrode (FTCE, ∼7 μm) was fabricated via semi-embedding AgNWs in the HB-PI substrate. The FTCE possesses excellent optoelectronic property, smooth surface, and high mechanical stability simultaneously. Based on this FTCE, an ultrathin OSC was constructed with a PCE of 13.52% (average of 13.22%). Moreover, the ultrathin OSC showed outstanding mechanical stability (PCE decreased by less than 4% after 1000 bending cycles at a small bending radius of 0.5 mm) and superior UV light stability (no evident PCE degradation after irradiation under UV light for 10 h). This work will provide a new avenue for fabricating high-performance and stable ultrathin OSCs. This article is protected by copyright. All rights reserved.

Basic Amino Acids Modulated Neutral-pH PEDOT:PSS for Stable Blue Perovskite Light-Emitting Diodes

State-of-the-art external quantum efficiencies (EQEs) have exceeded 20% for near-infrared, red, and green perovskite light-emitting diodes (PeLEDs) so far. Nevertheless, the cutting-edge blue counterparts demonstrate an inferior device performance, which impedes the commercialization and industrialization of PeLEDs in ultrahigh-definition displays. As the most popular hole transport layer, poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) bears the acidic and hygroscopic drawbacks, which deteriorates the device efficiency and long-term stability of blue PeLEDs. In this work, the basic amino acids with zwitterionic characteristics are proposed to modulate the pH of PEDOT:PSS, which are arginine, lysine, and histidine. It is found that they play a triple function to the blue perovskite films: modulating the acidity of PEDOT:PSS, controlling the crystalline process, and passivating the defects at the PEDOT:PSS/perovskite interface. As a result, the utilization of neutral PEDOT:PSS leads to a significant enhancement in stability and photoluminescence quantum yield. Eventually, the pure-blue PeLEDs achieve a record EQE of 5.6% with the emission peak at 467 nm. This research proves that the interfacial engineering of hole transport layers is a reliable strategy to enhance the device efficiency and operation stability of blue PeLEDs.

Domain size control in all-polymer solar cells

In all polymer solar cells (all-PSCs), the domain size is critical for device performance. In highly crystalline polymer blends, however, precisely adjusting the domain size remains a significant challenge because of the simultaneous crystallization of both components. Herein, a strategy that promotes acceptor and donor to crystallize separately was proposed. Take PBDB-T/N2200 blends for instance; the solution state and confined crystallization were combined, which induced the crystallization of N2200, and PBDB-T occurred during the film-forming process and at thermal annealing stage. This separated crystallization process lowers the driving force of phase separation without affecting the degree of crystallinity of the blends. Thus, an interpenetrating network with high crystallinity and proper domain size was obtained, which boosted the power conversion efficiency to 7.59%. Importantly, the relation between pre-aggregation and domain size was established, which may be a guide to precisely adjust the active layer’s domain size in all-PSCs.

•

This strategy decreases domain size without sacrificing crystallinity

•

A phase diagram about solution state and domain size was proposed

Ultrathin Flexible Transparent Composite Electrode via Semi-embedding Silver Nanowires in a Colorless Polyimide for High-Performance Ultraflexible Organic Solar Cells

Ultraflexible organic solar cells (OSCs) with both high power conversion efficiency (PCE) and good mechanical robustness are still challenging, in which flexible transparent composite electrodes (FTCEs, substrate-cum-electrodes) play critical roles. Here, an ultrathin FTCE (∼9 μm) via semi-embedding a silver nanowire electrode in a colorless polyimide (CPI) substrate was developed, which simultaneously possessed outstanding performance such as low square resistance (R_sq ∼ 12.7 Ω sq^-1), high optical transmittance (T₅₅₀ ∼ 86.3%), smooth surface (root-mean-square ∼ 0.32 nm), and excellent thermal, mechanical, and solution producing stability. Prior to the FTCE fabrication, four CPI samples with the number-average molecular weight ranging from 35.9 to 177.5 kDa were prepared and their optical, mechanical, and thermal properties were studied in detail. Moreover, the effect of the molecular weight on the minimum thickness that can withstand the following solution production of ultraflexible OSCs was investigated, which revealed that the molecular weight of CPI here should be above 81.4 kDa. Based on the FTCE, an ultraflexible OSC with a high PCE value of 14.37% and outstanding mechanical robustness was constructed, in which the PCE could still maintain above 96% of its initial value after 1000 bending cycles at a bending radius of 0.5 mm.

Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is one of the most prospering transparent conductive materials for flexible optoelectronic devices, which arises from its nonpareil features of low-cost solution processability, tunable conductivity, high transparency, and superior mechanical flexibility. However, acidity and hygroscopicity of PSS chains cause a decrease in conductivity, substrate corrosion, and device degradation. This work proposes a facile and effective direct doping strategy of sodium 3-methylsalicylate to enhance the conductivity, alleviate the acidity, and improve the stability of PEDOT:PSS electrodes, simultaneously. Owing to the formation of weaker acid and PSS-Na, PSS chains are disentangled from the coiled PEDOT:PSS complexes, leading to the phase separation of PEDOT:PSS and the formation of fibril-like PEDOT domains. Eventually, the sodium 3-methylsalicylate-modified PEDOT:PSS electrode is employed in flexible organic light-emitting diodes with an outstanding external quantum efficiency of up to 25%. The improved performance is attributed to the more matched work function and the as-formed interfacial dipole. The sodium 3-methylsalicylate-modified PEDOT:PSS electrode with high conductivity and transmittance, superior stability in the air as well as good mechanical flexibility has the potential to be the most promising transparent conductive material for flexible optoelectronic device applications.

Organoboron molecules and polymers for organic solar cell applications

Organic solar cells (OSCs) are emerging as a new photovoltaic technology with the great advantages of low cost, light-weight, flexibility and semi-transparency. They are promising for portable energy-conversion products and building-integrated photovoltaics. Organoboron chemistry offers an important toolbox to design novel organic/polymer optoelectronic materials and to tune their optoelectronic properties for OSC applications. At present, organoboron small molecules and polymers have become an important class of organic photovoltaic materials. Power conversion efficiencies (PCEs) of 16% and 14% have been realized with organoboron polymer electron donors and electron acceptors, respectively. In this review, we summarize the research progress in various kinds of organoboron photovoltaic materials for OSC applications, including organoboron small molecular electron donors, organoboron small molecular electron acceptors, organoboron polymer electron donors and organoboron polymer electron acceptors. This review also discusses how to tune their opto-electronic properties and active layer morphology for enhancing OSC device performance. We also offer our insight into the opportunities and challenges in improving the OSC device performance of organoboron photovoltaic materials.

All-polymer indoor photovoltaic modules

Indoor photovoltaic (IPV) with power output over 100 μW is promising to power the numerous sensor nodes in the Internet of Things (IoT) ecosystem. All polymer photovoltaic has the advantages of excellent thermal stability and superior mechanical properties. In this work, we fabricate the first all-polymer indoor photovoltaic module with the active area of 10 cm2. The module uses polymer donor CD1 and new polymer acceptor PBN-21 with medium optical band gap of 1.9 eV as the active layer. It is processed with eco-friendly solvent tetrahydrofuran and the morphology can be improved by blade coating at 55°C. Under light emitting diode illumination at 1000 lux, the module exhibits a power conversion efficiency of 12.04% and a power output of 367.2 μW. The sufficient power output, high efficiency, excellent stability, and eco-friendly processing indicate that all-polymer indoor photovoltaic is a promising approach to achieve the self-powered of sensor nodes in the IoT ecosystem.

Mechanical Robust Flexible Single-Component Organic Solar Cells

Owing to the advantages of being lightweight and compatible with surfaces with different deformations, flexible organic solar cells (OSCs) have broad scopes of applications, including wearable electronics and portable devices. Most flexible OSCs focus on the two-component bulk-heterojunction (BHJ) photo-active layers, but they usually suffer from degradation problems both in efficiency and mechanical durability derived from the limited phase stability under mechanical and thermal stress. Whereas, single-component organic solar cells (SCOSCs) based on the double-cable conjugated polymer are supposed to possess excellent mechanical robustness and long-term stability. Here, the first flexible SCOSCs based on a double-cable polymer are fabricated on a transparent silver nanowires (AgNWs) electrode on a plastic foil. Impressively, the obtained flexible SCOSCs exhibited a power conversion efficiency (PCE) of 7.21%. The flexible SCOSCs are further demonstrated to possess superior mechanical robustness (>95% retention after 1000 bending cycles) and storage stability (>97% retention after 430 h in nitrogen atmosphere) compared to several BHJ-type flexible OSCs. The pseudo-free-standing tensile test and morphology investigation are conducted to reveal the distinction in mechanical durability of the single-component polymer film and the BHJ-type films. Besides, ultraflexible SCOSCs are also fabricated, indicating the application prospect and superiority in flexible devices and wearable electronic products.