Micropatterned cell sheets with defined cell and extracellular matrix orientation exhibit anisotropic mechanical properties

Natural Tissue-Imprinted Biointerface for the Topographical Education of a Biomimetic Cell Sheet

Cell sheet engineering as a cell-based scaffold-free therapy is promising in tissue engineering, allowing precise transforming treatments for various tissue damage. However, the current cutting-edge techniques are still hampered by the difficulty in mimicking the natural tissue organizations and the corresponding physiological functions. In this work, cell-imprinting technology using the natural tissue as a template was proposed to rationally educate the cellular alignment in the cell sheet. Through this technique, we obtained temporary templates with morphological structure complementary to native tissues and then directly transferred the structure on the template to the collagen layer on a photothermally convertible substrate by secondary imprinting replication. The resultant biomimetic interface was used for cell culture and release to obtain a cell sheet with a texture similar to the natural tissue morphology. Different from conventional photolithography, the natural tissue-imprinted biointerface guides the geometry of cell sheets in the way of natural principles instead of stereotyped or overuniform cell organization. Simultaneously, a near-infrared laser (NIR) was used to irradiate the photothermally responsive substrate to obtain complete cell sheets efficiently and nondestructively. The natural tissue-educated myocardium cell sheets exhibited good physiological activity and biomimetic biofunctions, such as mechanical properties and physiological performances. This approach might open an inspiring prospect in regenerative medicine and offer a new approach to realizing the biomimetic tissue construction.

Promoting and Orienting Axon Extension Using Scaffold-Free Dental Pulp Stem Cell Sheets

Current treatments of facial nerve injury result in poor functional outcomes due to slow and inefficient axon regeneration and aberrant reinnervation. To address these clinical challenges, bioactive scaffold-free cell sheets were engineered using neurotrophic dental pulp stem/progenitor cells (DPCs) and their aligned extracellular matrix (ECM). DPCs endogenously supply high levels of neurotrophic factors (NTFs), growth factors capable of stimulating axonal regeneration, and an aligned ECM provides guidance cues to direct axon extension. Human DPCs were grown on a substrate comprising parallel microgrooves, inducing the cells to align and deposit a linearly aligned, collagenous ECM. The resulting cell sheets were robust and could be easily removed from the underlying substrate. DPC sheets produced NTFs at levels previously shown capable of promoting axon regeneration, and, moreover, inducing DPC alignment increased the expression of select NTFs relative to unaligned controls. Furthermore, the aligned DPC sheets were able to stimulate functional neuritogenic effects in neuron-like cells in vitro. Neuronally differentiated neuroblastoma SH-SY5Y cells produced neurites that were significantly more oriented and less branched when cultured on aligned cell sheets relative to unaligned sheets. These data demonstrate that the linearly aligned DPC sheets can biomechanically support axon regeneration and improve axonal guidance which, when applied to a facial nerve injury, will result in more accurate reinnervation. The aligned DPC sheets generated here could be used in combination with commercially available nerve conduits to enhance their bioactivity or be formed into stand-alone scaffold-free nerve conduits capable of facilitating improved facial nerve recovery.

Mechanical Behavior of Biomimetic Oriented Cell Sheets from a Perspective of Living Materials

When compared to random cell organization, cell sheets with well-organized cell orientation are similar to natural tissues exhibiting better mechanical strength. Furthermore, as living materials, the mechanical strength of cell...

Mechanical properties of cell sheets and spheroids: the link between single cells and complex tissues

Cell aggregates, including sheets and spheroids, represent a simple yet powerful model system to study both biochemical and biophysical intercellular interactions. However, it is becoming evident that, although the mechanical properties and behavior of multicellular structures share some similarities with individual cells, yet distinct differences are observed in some principal aspects. The description of mechanical phenomena at the level of multicellular model systems is a necessary step for understanding tissue mechanics and its fundamental principles in health and disease. Both cell sheets and spheroids are used in tissue engineering, and the modulation of mechanical properties of cell constructs is a promising tool for regenerative medicine. Here, we review the data on mechanical characterization of cell sheets and spheroids, focusing both on advances in the measurement techniques and current understanding of the subject. The reviewed material suggest that interplay between the ECM, intercellular junctions, and cellular contractility determines the behavior and mechanical properties of the cell aggregates.

Recent advances in cell sheet technology for bone and cartilage regeneration: from preparation to application

Bone defects caused by trauma, tumour resection, infection and congenital deformities, together with articular cartilage defects and cartilage-subchondral bone complex defects caused by trauma and degenerative diseases, remain great challenges for clinicians. Novel strategies utilising cell sheet technology to enhance bone and cartilage regeneration are being developed. The cell sheet technology has shown great clinical potential in regenerative medicine due to its effective preservation of cell-cell connections and extracellular matrix and its scaffold-free nature. This review will first introduce several widely used cell sheet preparation systems, including traditional approaches and recent improvements, as well as their advantages and shortcomings. Recent advances in utilising cell sheet technology to regenerate bone or cartilage defects and bone-cartilage complex defects will be reviewed. The key challenges and future research directions for the application of cell sheet technology in bone and cartilage regeneration will also be discussed.

Evaluation of Placental Mesenchymal Stem Cell Sheets for Myocardial Repair and Regeneration

IMPACT STATEMENT

This work explores placental tissue as a cell source for fabrication of tissue-engineered surgical patches for myocardial repair of congenital heart defects. This study demonstrates promising findings for the clinically driven evaluation of the cell source as defined by potential cardiac benefit, compatibility, cell source availability, and implant deliverability. It documents methods for the isolation of mesenchymal stem cells from human placental amnion and chorion tissues, characterization of these cells, and eventual cell sheet growth that can be leveraged going forward for patch fabrication. It establishes support to continue pursuing the placenta as a valuable cell source for myocardial repair.

Micropatterned cell sheets as structural building blocks for biomimetic vascular patches

To successfully develop a functional tissue-engineered vascular patch, recapitulating the hierarchical structure of vessel is critical to mimic mechanical properties. Here, we use a cell sheet engineering strategy with micropatterning technique to control structural organization of bovine aortic vascular smooth muscle cell (VSMC) sheets. Actin filament staining and image analysis showed clear cellular alignment of VSMC sheets cultured on patterned substrates. Viability of harvested VSMC sheets was confirmed by Live/Dead^® cell viability assay after 24 and 48 h of transfer. VSMC sheets stacked to generate bilayer VSMC patches exhibited strong inter-layer bonding as shown by lap shear test. Uniaxial tensile testing of monolayer VSMC sheets and bilayer VSMC patches displayed nonlinear, anisotropic stress-stretch response similar to the biomechanical characteristic of a native arterial wall. Collagen content and structure were characterized to determine the effects of patterning and stacking on extracellular matrix of VSMC sheets. Using finite-element modeling to simulate uniaxial tensile testing of bilayer VSMC patches, we found the stress-stretch response of bilayer patterned VSMC patches under uniaxial tension to be predicted using an anisotropic hyperelastic constitutive model. Thus, our cell sheet harvesting system combined with biomechanical modeling is a promising approach to generate building blocks for tissue-engineered vascular patches with structure and mechanical behavior mimicking native tissue.

On the influence of surface patterning on tissue self-assembly and mechanics

Extracellular matrix assembly and composition influence the biological and mechanical functions of tissues. Developing strategies to control the spatial arrangement of cells and matrix is of central importance for tissue engineering-related approaches relying on self-assembling and scaffoldless processes. Literature reports demonstrated that signals patterned on material surfaces are able to control cell positioning and matrix orientation. However, the mechanisms underlying the interactions between material signals and the structure of the de novo synthesized matrix are far from being thoroughly understood. In this work, we investigated the ordering effect provided by nanoscale topographic patterns on the assembly of tissue sheets grown in vitro. We stimulated MC3T3-E1 preosteoblasts to produce and assemble a collagen-rich matrix on substrates displaying patterns with long- or short-range order. Then, we investigated microstructural features and mechanical properties of the tissue in uniaxial tension. Our results demonstrate that patterned material surfaces are able to control the initial organization of cells in close contact to the surface; then cell-generated contractile forces profoundly remodel tissue structure towards mechanically stable spatial patterns. Such a remodelling effect acts both locally, as it affects cell and nuclear shape and globally, by affecting the gross mechanical response of the tissue. Such an aspect of dynamic interplay between cells and the surrounding matrix must be taken into account when designing material platform for the in vitro generation of tissue with specific microstructural assemblies.

Substrate Topography Modulates Cell Aging on a Progeria Cell Model

Aging is characterized by a progressive accumulation of cellular damage, which leads to impaired function. Little is known whether substrates can influence cell aging. This is of utmost importance in the development of medical devices that are in contact with human tissue for long periods of time. To address this question, we have used an accelerated aging cell model derived from Hutchinson-Gilford Progeria Syndrome (HGPS) induced pluripotent stem cells (iPSCs). Our results show that HGPS-iPSC smooth muscle cells (SMCs) have an increased aging profile in substrates with specific micropatterns than in flat ones. This is characterized by an up-regulation in the expression of progerin, β-galactosidase, annexin 3 and 5, and caspase 9. Signs of cell aging are also observed in SMCs without HGPS cultured in substrates with specific microtopographies. It is further showed that specific micropatterned substrates induce cell aging by triggering a DNA damage program likely by the disruption between cyto- and nucleoskeleton.

Circular-shaped microfluidic device to study the effect of shear stress on cellular orientation

Understanding the effects of shear stress on mammalian cells is a crucial factor for understanding a number of biological processes and diseases. Here, we show the development of a circular-shaped microfluidic device for the facile generation of shear stress gradients. With this microfluidic device, the effect of shear stress on orientation of human umbilical vein endothelial cells was studied. This microfluidic device, which enables to control the alignment of human umbilical vein endothelial cells within a microchannel, can be a valuable tool to mimic blood vessels.

Surface Engineering for Mechanical Enhancement of Cell Sheet by Nano-Coatings

Cell sheet technology is becoming increasingly popular in tissue engineering and regenerative medicine, due to integrity into versatile organ and manageable cell and tissue type from the bank, and no needs of large volume organ for transplantation. Cell sheets have still a room to resolve the mechanical resistance under load-bearing occasion, easy translocation into organ, and prompt shape modulation for regular application in vivo. Herein, a layer-by-layer (LbL) assembly of nanometer scaled film coating method was introduced to inter-planar cell sheet for multilayered cell sheet (M1) and a single cell before sheet formation (M2). Nano-films with collagen and alginate increased mechanical property of cell sheets without altering cell functions, viability, and proliferation. The moduli of triple layered cell sheet (M1) and (M2) were critically enhanced to 109% and 104%, compared to uncoated cell sheet (CON) with mono-layer, while modulus of CON with triple-layers were increased to 43%. LbL assembly to cell sheets offers increased modulus allowing cell sheet engineering to become a potential strategy under load-bearing environment.

A Robust Method to Generate Mechanically Anisotropic Vascular Smooth Muscle Cell Sheets for Vascular Tissue Engineering

In arterial tissue engineering, mimicking native structure and mechanical properties is essential because compliance mismatch can lead to graft failure and further disease. With bottom-up tissue engineering approaches, designing tissue components with proper microscale mechanical properties is crucial to achieve the necessary macroscale properties in the final implant. This study develops a thermoresponsive cell culture platform for growing aligned vascular smooth muscle cell (VSMC) sheets by photografting N-isopropylacrylamide (NIPAAm) onto micropatterned poly(dimethysiloxane) (PDMS). The grafting process is experimentally and computationally optimized to produce PNIPAAm-PDMS substrates optimal for VSMC attachment. To allow long-term VSMC sheet culture and increase the rate of VSMC sheet formation, PNIPAAm-PDMS surfaces were further modified with 3-aminopropyltriethoxysilane yielding a robust, thermoresponsive cell culture platform for culturing VSMC sheets. VSMC cell sheets cultured on patterned thermoresponsive substrates exhibit cellular and collagen alignment in the direction of the micropattern. Mechanical characterization of patterned, single-layer VSMC sheets reveals increased stiffness in the aligned direction compared to the perpendicular direction whereas nonpatterned cell sheets exhibit no directional dependence. Structural and mechanical anisotropy of aligned, single-layer VSMC sheets makes this platform an attractive microstructural building block for engineering a vascular graft to match the in vivo mechanical properties of native arterial tissue.

Introducing biomimetic shear and ion gradients to microfluidic spinning improves silk fiber strength

Silkworm silk is an attractive biopolymer for biomedical applications due to its high mechanical strength and biocompatibility; as a result, there is increasing interest in scalable devices to spin silk and recombinant silk so as to improve and customize their properties for diverse biomedical purposes (Vepari and Kaplan 2007 Prog. Polym. Sci. 32 ). While artificial spinning of regenerated silk fibroins adds tunability to properties such as degradation rate and surface functionalization, the resulting fibers do not yet approach the mechanical strength of native silkworm silk. These drawbacks reduce the applicability and attractiveness of artificial silk (Kinahan et al 2011 Biomacromolecules 12 ). Here, we used computational fluid dynamic simulations to incorporate shear in tandem with biomimetic ion gradients by coupling a modular novel glass microfluidic device to our previous co-axial flow device. Fibers spun with this combined apparatus demonstrated a significant increase in mechanical strength compared to fibers spun with the basic apparatus alone, with a three-fold increase in Young's modulus and extensibility and a twelve-fold increase in toughness. These results thus demonstrate the critical importance of ionic milieu and shear stress in spinning strong fibers from solubilized silk fibroin.

Aligned Nanofibrous Cell-Derived Extracellular Matrix for Anisotropic Vascular Graft Construction

There is a large demand for tissue engineered vascular grafts for the application of vascular reconstruction surgery or in vitro drug screening tissue model. The extracellular matrix (ECM) composition along with the structural and mechanical anisotropy of native blood vessels is critical to their functional performance. The objective of this study is to develop a biomimetic vascular graft recapitulating the anisotropic features of native blood vessels by employing nanofibrous aligned fibroblast-derived ECM and human mesenchymal stem cells (hMSCs). The nanotopographic cues of aligned ECM direct the initial cell orientation. The subsequent maturation under circumferential stress generated by a rotating wall vessel (RWV) bioreactor further promotes anisotropic structural and mechanical properties in the graft. The circumferential tensile strength is significantly higher than longitudinal strength in bioreactor samples. Expression of smooth muscle cell specific genes, α-smooth muscle actin and calponin, in hMSCs is greatly enhanced in bioreactor samples without any biochemical stimulation. In addition, employment of premade ECM and RWV bioreactor significantly reduces the graft fabrication time to three weeks. Mimicking the ECM composition, cell phenotype, structural and mechanical anisotropy, the vascular graft presented in this study is promising for vascular reconstruction surgery or in vitro tissue model applications.

In Vitro Study of Directly Bioprinted Perfusable Vasculature Conduits

The ability to create three dimensional (3D) thick tissues is still a major tissue engineering challenge. It requires the development of a suitable vascular supply for an efficient media exchange. An integrated vasculature network is particularly needed when building thick functional tissues and/or organs with high metabolic activities, such as the heart, liver and pancreas. In this work, human umbilical vein smooth muscle cells (HUVSMCs) were encapsulated in sodium alginate and printed in the form of vasculature conduits using a coaxial deposition system. Detailed investigations were performed to understand the dehydration, swelling and degradation characteristics of printed conduits. In addition, because perfusional, permeable and mechanical properties are unique characteristics of natural blood vessels, for printed conduits these properties were also explored in this work. The results show that cells encapsulated in conduits had good proliferation activities and that their viability increased during prolonged in vitro culture. Deposition of smooth muscle matrix and collagen was observed around the peripheral and luminal surface in long-term cultured cellular vascular conduit through histology studies.

Versatile and inexpensive Hall-Effect force sensor for mechanical characterization of soft biological materials

Mismatch of hierarchical structure and mechanical properties between tissue-engineered implants and native tissue may result in signal cues that negatively impact repair and remodeling. With bottom-up tissue engineering approaches, designing tissue components with proper microscale mechanical properties is crucial to achieve necessary macroscale properties in the final implant. However, characterizing microscale mechanical properties is challenging, and current methods do not provide the versatility and sensitivity required to measure these fragile, soft biological materials. Here, we developed a novel, highly sensitive Hall-Effect based force sensor that is capable of measuring mechanical properties of biological materials over wide force ranges (μN to N), allowing its use at all steps in layer-by-layer fabrication of engineered tissues. The force sensor design can be easily customized to measure specific force ranges, while remaining easy to fabricate using inexpensive, commercial materials. Although we used the force sensor to characterize mechanics of single-layer cell sheets and silk fibers, the design can be easily adapted for different applications spanning larger force ranges (>N). This platform is thus a novel, versatile, and practical tool for mechanically characterizing biological and biomimetic materials.

Biointerface by Cell Growth on Graphene Oxide Doped Bacterial Cellulose/Poly(3,4-ethylenedioxythiophene) Nanofibers

Highly biocompatible advanced materials with excellent electroactivity are increasingly meaningful to biointerfaces and the development of biomedicine. Herein, bacterial cellulose/poly(3,4-ethylene dioxythiophene)/graphene oxide (BC/PEDOT/GO) composite nanofibers were synthesized through the in situ interfacial polymerization of PEDOT with the doping of GO. The abundant free carboxyl and hydroxy groups offer the BC/PEDOT/GO film active functional groups for surface modification. We demonstrate the use of this composite nanofiber for the electrical stimulation of PC12 neural cells as this resultant nanofiber scaffold could closely mimic the structure of the native extracellular matrix (ECM) with a promoting cell orientation and differentiation after electrical stimulation of PC12 cells. It is expected that this biocompatible BC/PEDOT/GO material will find potential applications in biological and regenerative medicine.

Hypoxia Created Human Mesenchymal Stem Cell Sheet for Prevascularized 3D Tissue Construction

3D tissue based on human mesenchymal stem cell (hMSC) sheets offers many interesting opportunities for regenerating multiple types of connective tissues. Prevascularizing hMSC sheets with endothelial cells (ECs) will improve 3D tissue performance by supporting cell survival and accelerating integration with host tissue. It is hypothesized that hypoxia cultured hMSC sheets can promote microvessel network formation and preserve stemness of hMSCs. This study investigates the vascularization of hMSC sheets under different oxygen tensions. It is found that the HN condition, in which hMSC sheets formed under physiological hypoxia (2% O2 ) and then cocultured with ECs under normoxia (20% O2 ), enables longer and more branched microvessel network formation. The observation is corroborated by higher levels of angiogenic factors in coculture medium. Additionally, the hypoxic hMSC sheet is more uniform and less defective, which facilitates fabrication of 3D prevascularized tissue construct by layering the prevascularized hMSC sheets and maturing in rotating wall vessel bioreactor. The hMSCs in the 3D construct still maintain multilineage differentiation ability, which indicates the possible application of the 3D construct for various connective tissues regeneration. These results demonstrate that hypoxia created hMSC sheets benefit the microvessel growth and it is feasible to construct 3D prevascularized tissue construct using the prevascularized hMSC sheets.

Cell Sheet-Based Tissue Engineering for Organizing Anisotropic Tissue Constructs Produced Using Microfabricated Thermoresponsive Substrates

In some native tissues, appropriate microstructures, including orientation of the cell/extracellular matrix, provide specific mechanical and biological functions. For example, skeletal muscle is made of oriented myofibers that is responsible for the mechanical function. Native artery and myocardial tissues are organized three-dimensionally by stacking sheet-like tissues of aligned cells. Therefore, to construct any kind of complex tissue, the microstructures of cells such as myotubes, smooth muscle cells, and cardiomyocytes also need to be organized three-dimensionally just as in the native tissues of the body. Cell sheet-based tissue engineering allows the production of scaffold-free engineered tissues through a layer-by-layer construction technique. Recently, using microfabricated thermoresponsive substrates, aligned cells are being harvested as single continuous cell sheets. The cell sheets act as anisotropic tissue units to build three-dimensional tissue constructs with the appropriate anisotropy. This cell sheet-based technology is straightforward and has the potential to engineer a wide variety of complex tissues. In addition, due to the scaffold-free cell-dense environment, the physical and biological cell-cell interactions of these cell sheet constructs exhibit unique cell behaviors. These advantages will provide important clues to enable the production of well-organized tissues that closely mimic the structure and function of native tissues, required for the future of tissue engineering.

Development of glandular models from human nasal progenitor cells

Hyperplasia/hypertrophy of submucosal glands contributes to mucus overproduction in chronic diseases of the upper and lower respiratory tracts, especially in adult and pediatric chronic rhinosinusitis. Mechanisms that lead to glandular hyperplasia/hypertrophy are markedly understudied, reflecting a lack of in vitro model systems wherein airway epithelial progenitor cells differentiate into glandular cells. In this study, we developed and compared several in vitro three-dimensional systems using human nasal epithelial basal cells (HNEBCs) cultured by different methods on two types of extracellular matrices. We demonstrate that HNEBCs cultured on Matrigel (Corning, Tewksbury, MA) form glandular acini-like structures, whereas HNEBCs embedded in a collagen type I matrix form a network of tubules. Fibroblast-conditioned medium increases tubule formation in collagen type I. In contrast, HNEBCs cocultured with fibroblasts self-aggregate into organotypic structures with tubules and acini. These observations provide morphological evidence that HNEBCs are pluripotent and retain the capacity to differentiate into structures resembling specific structural components of submucosal glands depending on the extracellular matrices and culture conditions. The resultant models should prove useful in targeting cross-talk between epithelial cells and fibroblasts to decipher molecular mechanisms and specific signals responsible for the development of glandular hyperplasia/hypertrophy, which in turn may lead to new therapeutic strategies for chronic rhinosinusitis and other inflammatory respiratory diseases characterized by glandular hyperplasia/hypertrophy.

Depth (Z-axis) control of cell morphologies on micropatterned surfaces

In this study, cell responses on micropatterned films that were changing in groove–ridge widths and pattern depth were investigated to compare the degree of size effects from X–Y and Z planes. Poly(caprolactone) films with five different groove–ridge sizes and three pattern depths were prepared by hot embossing technique. In general, the morphologies of osteoblast cell were not changed noticeably by the size changes in groove–ridges with the same depth size. However, cell morphologies were changed significantly when pattern depths were increased from 1.35 to 4.95 µm. Also, the cell morphology change between different groove–ridges was significant when the pattern depth was small (1.35 µm), and these effects were diminished or masked when the pattern depth was increased to 4.95 µm. Linear regression analysis further clarifies that unit size changes in depth may affect cell length and orientation rates 2.4 and 4 times, respectively, in comparison to rates obtained from X–Y planes.

A thermoresponsive, micro-roughened cell culture surface

Surface topography has been shown to play a major role in cell behavior, but has yet to be seriously exploited in the field of cell surface engineering. In the present work, surface roughness has been used in combination with the thermoresponsive polymer polyisopropylacrylamide (PIPAAm) to generate cell sheets with tailored biochemical properties. Micro-roughened polystyrene (PS) with 1.5-5.5 μm features was derivatized with PIPAAm to form a cell culture surface for the growth of human fibroblast cell sheets that exhibit a modified cytoskeleton and extracellular matrix. Fibroblasts cell sheets cultured on the rough surfaces had fewer actin stress fibers and twice the average fibronectin (FN) fibril formation when compared to cell sheets on flat substrates. The cell sheets harvested from the roughened PS were collected after only 2 days of culture and detached from the PIPAAm grafted surface in <1h after cooling the culture system. The simple and rapid method for generating cell sheets with increased FN fibril formation has applications in tissue grafts or wound repair and has demonstrated that the thermoresponsive surface can be used for reliable cell sheet formation.

Engineering myocardial tissue patches with hierarchical structure-function

Complex hierarchical organization is a hallmark of tissues and their subsequent integration into organs. A major challenge in tissue engineering is to generate arrays of cells with defined structural organization that display appropriate functional properties. Given what is known about cellular responses to physiochemical cues from the surrounding environment, we can build tissue structures that mimic these microenvironments and validate these platforms using both experimental and computational approaches. Tissue generation encompasses many methods and tissue types, but here we review layering cell sheets to create scaffold-less myocardial patches. We discuss surgical criteria that can drive the design of myocardial cell sheets and the methods used to fabricate, mechanically condition, and functionally test them. We also focus on how computational and experimental approaches could be integrated to optimize tissue mechanical properties by using measurements of biomechanical properties and tissue anisotropy to create predictive computational models. Tissue anisotropy and dynamic mechanical stimuli affect cell phenotype in terms of protein expression and secretion, which in turn, leads to compositional and structural changes that ultimately impact tissue function. Therefore, a combinatorial approach of design, fabrication, testing, and modeling can be carried out iteratively to optimize engineered tissue function.

Glycated Collagen Decreased Endothelial Cell Fibronectin Alignment in Response to Cyclic Stretch Via Interruption of Actin Alignment

Hyperglycemia is a defining characteristic of diabetes, and uncontrolled blood glucose in diabetes is associated with accelerated cardiovascular disease. Chronic hyperglycemia glycates extracellular matrix (ECM) collagen, which can lead to endothelial cell dysfunction. In healthy conditions, endothelial cells respond to mechanical stimuli such as cyclic stretch (CS) by aligning their actin cytoskeleton. Other cell types, specifically fibroblasts, align their ECM in response to CS. We previously demonstrated that glycated collagen inhibits endothelial cell actin alignment in response to CS. The aim of this study was to determine the effect of glycated collagen on ECM remodeling and protein alignment in response to stretch. Porcine aortic endothelial cells (PAEC) seeded on native or glycated collagen coated elastic substrates were exposed to 10% CS. Cells on native collagen aligned subcellular fibronectin fibers in response to stretch, whereas cells on glycated collagen did not. The loss of fibronectin alignment was due to inhibited actin alignment in response to CS, since fibronectin alignment did not occur in cells on native collagen when actin alignment was inhibited with cytochalasin. Further, while ECM protein content did not change in cells on native or glycated collagen in response to CS, degradation activity decreased in cells on glycated collagen. Matrix metalloproteinase 2 (MMP-2) and membrane-associated type 1 matrix metalloproteinase (MT1-MMP) protein levels decreased, and therefore MMP-2 activity also decreased. These MMP changes may relate to c-Jun N-terminal kinase (Jnk) phosphorylation inhibition with CS, which has previously been linked to focal adhesion kinase (FAK). These data demonstrate the importance of endothelial cell actin tension in remodeling and aligning matrix proteins in response to mechanical stimuli, which is critical to vascular remodeling in health and disease.

Effect of multiwall carbon nanotube reinforcement on coaxially extruded cellular vascular conduits

Due to its abundant source, good biocompatibility, low price and mild crosslinking process, alginate is an ideal selection for tissue engineering applications. In this work, alginate vascular conduits were fabricated through a coaxial extrusion-based system. However, due to the inherent weak mechanical properties of alginate, the vascular conduits are not capable of biomimicking natural vascular system. In this paper, multiwall carbon nanotubes (MWCNT) were used to reinforce vascular conduits. Mechanical, dehydration, swelling and degradation tests were performed to understand influences of MWCNT reinforcement. The unique mechanical properties together with perfusion and diffusional capability are two important factors to mimic the nature. Thus, perfusion experiments were also conducted to explore the MWCNT reinforcement effect. In addition, cell viability and tissue histology were conducted to evaluate the biological performance of conduits both in short and long term for MWCNT reinforcement.

Highly Aligned Nanofibrous Scaffold Derived from Decellularized Human Fibroblasts

Native tissues are endowed with a highly organized nanofibrous extracellular matrix (ECM) that directs cellular distribution and function. The objective of this study is to create a purely natural, uniform, and highly aligned nanofibrous ECM scaffold for potential tissue engineering applications. Synthetic nanogratings (130 nm in depth) were used to direct the growth of human dermal fibroblasts for up to 8 weeks, resulting in a uniform 70 μm-thick fibroblast cell sheet with highly aligned cells and ECM nanofibers. A natural ECM scaffold with uniformly aligned nanofibers of 78 ± 9 nm in diameter was generated after removing the cellular components from the detached fibroblast sheet. The elastic modulus of the scaffold was well maintained after the decellularization process because of the preservation of elastin fibers. Reseeding human mesenchymal stem cells (hMSCs) showed the excellent capacity of the scaffold in directing and supporting cell alignment and proliferation along the underlying fibers. The scaffold's biocompatibility was further examined by an in vitro inflammation assay with seeded macrophages. The aligned ECM scaffold induced a significantly lower immune response compared to its unaligned counterpart, as detected by the pro-inflammatory cytokines secreted from macrophages. The aligned nanofibrous ECM scaffold holds great potential in engineering organized tissues.

Biomechanics and mechanobiology in functional tissue engineering

The field of tissue engineering continues to expand and mature, and several products are now in clinical use, with numerous other preclinical and clinical studies underway. However, specific challenges still remain in the repair or regeneration of tissues that serve a predominantly biomechanical function. Furthermore, it is now clear that mechanobiological interactions between cells and scaffolds can critically influence cell behavior, even in tissues and organs that do not serve an overt biomechanical role. Over the past decade, the field of "functional tissue engineering" has grown as a subfield of tissue engineering to address the challenges and questions on the role of biomechanics and mechanobiology in tissue engineering. Originally posed as a set of principles and guidelines for engineering of load-bearing tissues, functional tissue engineering has grown to encompass several related areas that have proven to have important implications for tissue repair and regeneration. These topics include measurement and modeling of the in vivo biomechanical environment; quantitative analysis of the mechanical properties of native tissues, scaffolds, and repair tissues; development of rationale criteria for the design and assessment of engineered tissues; investigation of the effects biomechanical factors on native and repair tissues, in vivo and in vitro; and development and application of computational models of tissue growth and remodeling. Here we further expand this paradigm and provide examples of the numerous advances in the field over the past decade. Consideration of these principles in the design process will hopefully improve the safety, efficacy, and overall success of engineered tissue replacements.

Nanotopography-guided tissue engineering and regenerative medicine

Human tissues are intricate ensembles of multiple cell types embedded in complex and well-defined structures of the extracellular matrix (ECM). The organization of ECM is frequently hierarchical from nano to macro, with many proteins forming large scale structures with feature sizes up to several hundred microns. Inspired from these natural designs of ECM, nanotopography-guided approaches have been increasingly investigated for the last several decades. Results demonstrate that the nanotopography itself can activate tissue-specific function in vitro as well as promote tissue regeneration in vivo upon transplantation. In this review, we provide an extensive analysis of recent efforts to mimic functional nanostructures in vitro for improved tissue engineering and regeneration of injured and damaged tissues. We first characterize the role of various nanostructures in human tissues with respect to each tissue-specific function. Then, we describe various fabrication methods in terms of patterning principles and material characteristics. Finally, we summarize the applications of nanotopography to various tissues, which are classified into four types depending on their functions: protective, mechano-sensitive, electro-active, and shear stress-sensitive tissues. Some limitations and future challenges are briefly discussed at the end.

Influence of cyclic mechanical stretch and tissue constraints on cellular and collagen alignment in fibroblast-derived cell sheets

Mechanical forces play an important role in shaping the organization of the extracellular matrix (ECM) in developing and mature tissues. The resulting organization gives the tissue its unique functional properties. Understanding how mechanical forces influence the alignment of the ECM is important in tissue engineering, where recapitulating the alignment of the native tissue is essential for appropriate mechanical anisotropy. In this work, a novel method was developed to create and stretch tubular cell sheets by seeding neonatal dermal fibroblasts onto a rotating silicone tube. We show the fibroblasts proliferated to create a confluent monolayer around the tube and a collagenous, isotropic tubular tissue over 4 weeks of static culture. These silicone tubes with overlying tubular tissue constructs were mounted into a cyclic distension bioreactor and subjected to cyclic circumferential stretch at 5% strain, 0.5 Hz for 3 weeks. We found that the tissue subjected to cyclic stretch compacted axially over the silicone tube in comparison to static controls, leading to a circumferentially aligned tissue with higher membrane stiffness and maximum tension. In a subsequent study, the tissue constructs were constrained against axial compaction during cyclic stretching. The resulting alignment of fibroblasts and collagen was perpendicular (axial) to the stretch direction (circumferential). When the cells were devitalized with sodium azide before stretching, similarly constrained tissue did not develop strong axial alignment. This work suggests that both mechanical stretching and mechanical constraints are important in determining tissue organization, and that this organization is dependent on an intact cytoskeleton.

The expanding world of tissue engineering: the building blocks and new applications of tissue engineered constructs

The field of tissue engineering has been growing in the recent years as more products have made it to the market and as new uses for the engineered tissues have emerged, motivating many researchers to engage in this multidisciplinary field of research. Engineered tissues are now not only considered as end products for regenerative medicine, but also have emerged as enabling technologies for other fields of research ranging from drug discovery to biorobotics. This widespread use necessitates a variety of methodologies for production of tissue engineered constructs. In this review, these methods together with their non-clinical applications will be described. First, we will focus on novel materials used in tissue engineering scaffolds; such as recombinant proteins and synthetic, self assembling polypeptides. The recent advances in the modular tissue engineering area will be discussed. Then scaffold-free production methods, based on either cell sheets or cell aggregates will be described. Cell sources used in tissue engineering and new methods that provide improved control over cell behavior such as pathway engineering and biomimetic microenvironments for directing cell differentiation will be discussed. Finally, we will summarize the emerging uses of engineered constructs such as model tissues for drug discovery, cancer research and biorobotics applications.

Mechanical regulation of cellular phenotype: implications for vascular tissue regeneration

Cells sense a myriad of cues from their surrounding microenvironment to regulate their function. In recent years, it has become clear that physical and mechanical cues are as critical as biochemical factors in regulating cellular function. The geometry of the extracellular matrix (ECM), degree of cell spreading, and ECM rigidity all influence the physical connection between cells and their microenvironment and play a major role in regulating proliferation, differentiation, and migration. Leveraging these findings to promote specific cell behaviours will be paramount to realize the full potential of cellular therapies. In this review, I examine our current understanding of how mechanical cues-specifically, geometric control of cell shape and matrix rigidity-are transduced by stem cells to control their stemness, proliferation, and differentiation. The implications of these findings for vascular smooth muscle cell differentiation and cardiovascular tissue engineering will be highlighted.