Photoreforming of ethylene glycol over Rh/TiO2 and Rh/GaN:ZnO

Photocatalytic Conversion of Polyester-Derived Alcohol into Value-Added Chemicals by Engineering Atomically Dispersed Pd Catalyst

Photoreforming presents a promising strategy for upcycling waste polyester-derived alcohol into valuable chemicals. However, it remains a great challenge due to its low performance and unsatisfactory selectivity toward high-value C2 products. Here, we report the highly efficient and selective conversion of ethylene glycol (EG, a monomer of polyethylene terephthalate (PET)) to glycolaldehyde using atomically dispersed Pd species supported on TiO2 catalyst. A glycolaldehyde production rate of 5072 μmol gcat -1 h-1 with a selectivity of 90.0 % and long-term durability can be achieved. Experimental and theoretical results show that Pd single atoms can enhance the photocatalytic activity by enriching the photogenerated holes, which are the dominant species for the selective oxidation of EG to glycolaldehyde. More importantly, the adsorption of EG molecules on the catalysts is significantly promoted, which is subsequently transformed into RO⋅ radicals, a crucial intermediate in producing glycolaldehyde. Additionally, Pd single atoms on TiO2 enable the reduction of the glycolaldehyde desorption barrier, thereby facilitating high selectivity and inhibiting further oxidation to C1 products. This work provides new insights into the photocatalytic conversion of polyester wastes by atomic engineering.

Photocatalytic Synthesis of Glycine from Methanol and Nitrate

Photocatalytic utilization of methanol and nitrate as carbon and nitrogen sources for the direct synthesis of amino acids could provide a sustainable way for the valorization of green "liquid sunlight" and nitrate waste. In this study, we develop an efficient photochemical method to synthesize glycine directly from methanol and nitrate, which cascades the C-C coupling to form glycol, nitrate reduction to NH3, and finally C-N coupling to generate glycine. Interestingly, the involved photocatalytic tandem reactions show a synergistic effect, in which the presence of nitrate is the dominant factor to enable the overall reaction and reach high synthetic efficiency. Ba2+-TiO2 nanoparticles are confirmed as a feasible and efficient catalyst system for the photosynthesis of glycine with a remarkable glycine photosynthesis rate of 870 μmol gcat -1 h-1 under optimal conditions. This work establishes a novel catalytic system for amino acid synthesis from methanol and nitrate under mild conditions. These results also allow us to further suppose the formation pathways of amino acids on the primitive earth, as an extension to proposals based on the Miller-Urey experiments.

Selective Oxidation of Polyesters via PdCu-TiO2 Photocatalysts in Flow

Catalytic upcycling of plastic wastes offers a sustainable circular economy. Selective conversion of the most widely used polyester, polyethylene terephthalate (PET), under ambient conditions is practically attractive because of low energy consumption and carbon footprint. Here, we report selective, aerobic conversion of PET in a flow reactor using TiO2 photocatalyst modified with atomic Pd and metallic PdCu (Pd1Cu0.4-TiO2) under ambient conditions. We demonstrate that atomically synergistic Pd1Cu0.4-TiO2 exhibits a formate evolution of 4707 μmol g-1 h-1 with a selectivity of 92.3% together with trace COx released. Importantly, we show that this corresponds to 10-103 times greater activity than reported photocatalytic systems. We confirm that synergy between atomic Pd and metallic PdCu boosts directional charge transfer and oxygen-induced C-C cleavage and inhibits product decomposition. We conclude that photocatalytic waste plastic-to-chemical conversion is sustainable via targeted engineering of atomically synergistic catalysts and reaction systems.

From Plastic Waste to Green Hydrogen and Valuable Chemicals Using Sunlight and Water

Over 79 % of 6.3 billion tonnes of plastics produced from 1950 to 2015 have been disposed in landfills or found their way to the oceans, where they will reside for up to hundreds of years before being decomposed bringing upon significant dangers to our health and ecosystems. Plastic photoreforming offers an appealing alternative by using solar energy and water to transform plastic waste into value-added chemical commodities, while simultaneously producing green hydrogen via the hydrogen evolution reaction. This review aims to provide an overview of the underlying principles of emerging plastic photoreforming technologies, highlight the challenges associated with experimental protocols and performance assessments, discuss recent global breakthroughs on the photoreforming of plastics, and propose perspectives for future research. A critical assessment of current plastic photoreforming studies shows a lack of standardised conditions, hindering comparison amongst photocatalyst performance. Guidelines to establish a more accurate evaluation of materials and systems are proposed, with the aim to facilitate the translation of promising fundamental discovery in photocatalysts design.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

Towards carbon neutrality: Sustainable recycling and upcycling strategies and mechanisms for polyethylene terephthalate via biotic/abiotic pathways

Polyethylene terephthalate (PET), one of the most ubiquitous engineering plastics, presents both environmental challenges and opportunities for carbon neutrality and a circular economy. This review comprehensively addressed the latest developments in biotic and abiotic approaches for PET recycling/upcycling. Biotically, microbial depolymerization of PET, along with the biosynthesis of reclaimed monomers [terephthalic acid (TPA), ethylene glycol (EG)] to value-added products, presents an alternative for managing PET waste and enables CO2 reduction. Abiotically, thermal treatments (i.e., hydrolysis, glycolysis, methanolysis, etc.) and photo/electrocatalysis, enabled by catalysis advances, can depolymerize or convert PET/PET monomers in a more flexible, simple, fast, and controllable manner. Tandem abiotic/biotic catalysis offers great potential for PET upcycling to generate commodity chemicals and alternative materials, ideally at lower energy inputs, greenhouse gas emissions, and costs, compared to virgin polymer fabrication. Remarkably, over 25 types of upgraded PET products (e.g., adipic acid, muconic acid, catechol, vanillin, and glycolic acid, etc.) have been identified, underscoring the potential of PET upcycling in diverse applications. Efforts can be made to develop chemo-catalytic depolymerization of PET, improve microbial depolymerization of PET (e.g., hydrolysis efficiency, enzymatic activity, thermal and pH level stability, etc.), as well as identify new microorganisms or hydrolases capable of degrading PET through computational and machine learning algorithms. Consequently, this review provides a roadmap for advancing PET recycling and upcycling technologies, which hold the potential to shape the future of PET waste management and contribute to the preservation of our ecosystems.

Photocatalytic Production of Ethanolamines and Ethylenediamines from Bio-Polyols over a Cu/TiO2 Catalyst

Valorization of biomass-derived polyols into high-value-added ethanolamines and ethylenediamines is highly attractive. Herein, we report a one-step photocatalytic protocol to convert bio-polyols into a 60 % yield of ethanolamines and ethylenediamines over a multifunctional Cu/TiO2 catalyst. This catalyst enables a tandem process of photocatalytic polyol C-C bond cleavage and reductive amination in one pot at room temperature, and also allows the selective conversion of various bio-polyols and amines. Mechanistic studies revealed that photogenerated holes in TiO2 promote the retro-aldol C-C bond cleavage or oxidative dehydrogenation of polyols, and photogenerated electrons accumulate on small-sized Cu clusters, which facilitate the reductive amination via hydrogen transfer and prevent the H2 generation. This strategy provides new opportunities for the development of non-noble metal photocatalysts and methods of biomass conversion under mild conditions.

Concentration-Dependent Photocatalytic Upcycling of Poly(ethylene terephthalate) Plastic Waste

Photocatalytic plastic waste upcycling into value-added feedstock is a promising way to mitigate the environmental issues caused by the nondegradable nature of plastic waste. Here, we developed a MoS2/g-C3N4 photocatalyst that can efficiently upcycle poly(ethylene terephthalate) (PET) into valuable organic chemicals. Interestingly, the conversion mechanism is concentration-dependent. For instance, at a low ethylene glycol (EG) concentration (7.96 mM), acetate is the main product. Unexpectedly, the conversion of PET water bottle hydrolysate with only 7.96 mM ethylene glycol (EG) can produce a 4 times higher amount of acetate (704.59 nmol) than the conversion of 300 mM EG (174.50 nmol), while at a higher EG concentration (300 mM), formate is the dominant product. Herein, a 40 times higher EG concentration (300 mM compared to 7.96 mM) would produce only ∼3 times more formate (179 nmol compared to 51.86 nmol). In addition, under natural sunlight conditions, comparable amounts of liquid and gaseous products are produced when commercial PET plastics are employed. Overall, the photocatalytic PET conversion process is quite efficient under a low concentration of EG in PET hydrolysate, indicating the enormous potential of this photocatalysis strategy for real plastics upcycling.

An electron-deficient MOF as an efficient electron-transfer catalyst for selective oxidative carbon-carbon coupling of 2,6-di-tert-butylphenol

Naphthalene diimides (NDIs), a type of electron-deficient dye molecule with high quadrupole moment and excellent redox activity, have been utilized in various fields, such as energy transfer, chemical sensing, anion transport, and photo-/electrochromic materials. In this study, an electron-deficient metal-organic framework with one-dimensional channels, Eu₂(BBNDI)₃(DMF)₂ (MOF 1) (H₂BBNDI = N,N'-bis(3-benzoic acid)naphthalene diimide), was successfully constructed based on the naphthalene diimide derivative. Because of the generation of NDI radicals by electron transfer between components, this material exhibits fast-responsive reversible photochromic properties. Moreover, it shows high efficiency and selective oxidation of 2,6-di-tert-butylphenol to its quinone derivative, aldehyde, and dimeric or trimeric phenol derivative by controlling the reaction conditions.

H2 Photoproduction Efficiency: Implications of the Reaction Mechanism as a Function of the Methanol/Water Mixture

The influence of the reaction pathway of the sacrificial molecule oxidation to generate hydrogen is here investigated for lean and rich methanol reaction mixtures. Pt-TiO2 powders promoted or not with tin sulfide were used as catalysts. With the help of in situ infrared experiments under reaction conditions, methanol evolution was shown to take place by hole-related oxidation steps, with alkoxy and carbon-centered species as key radical species. The study analyzed quantitatively the fate and chemical use of the photons absorbed by the solids with the help of the quantum efficiency and the useful fraction of photons observables. Within this framework, the role of the sulfide component to promote photoactivity is interpreted, braiding chemical and photonic information.

Hydrogen Production During Ethylene Glycol Photoreactions Over Ag-Pd/TiO2 at Different Partial Pressures of Oxygen

The reaction of ethylene glycol has been studied over Ag-Pd/TiO₂ (anatase) under photo-irradiation while monitoring the reaction products (in the gas and liquid phases) as a function of time and at different partial pressures of molecular oxygen. The catalyst contained metal particles with a mean size of about 1 nm, most likely in the form of alloy (TEM, STEM, and XPS). The complex reaction network involves hydrogen abstraction, C-C bond dissociation, de-carbonylation and water gas shift ultimately yielding hydrogen and CO₂. The two main competing reactions were found to be, photo reforming and photo-oxidation. Based on our previous study, Ag presence improves the reaction rate for hydrogen production, most likely via decreasing the adsorption energy of CO when compared to pure Pd. At high ethylene glycol concentrations, the rate of hydrogen produced decreased by a factor of two while changing O₂ partial pressure from 0.001 to 0.2 atm. The rate was however very sensitive to oxygen partial pressures at low ethylene glycol concentrations, decreasing by about 50 times with increasing oxygen pressures to 1 atm. The order of reaction with respect to O₂ changed from near zero at high oxygen partial pressure to ½ at low partial pressure (in 0.008-0.2 atm. range). Liquid phase analysis indicated that the main reaction product was formaldehyde, where its concentration was found to be higher than that of H₂ and CO₂. The mass balance approached near unity only upon the incorporation of formaldehyde and after a prolonged reaction time. This suggests that the photo-reforming reaction was not complete even at prolonged time, most likely due to kinetic limitations.

Introducing catalysis in photocatalysis: What can be understood from surface science studies of alcohol photoreforming on TiO2

Mechanisms in heterogeneous photocatalysis have traditionally been interpreted by the band-structure model and analogously to electrochemistry. This has led to the establishment of 'band-engineering' as a leading principle for the discovery of more efficient photocatalysts. In such a picture, mainly thermodynamic aspects are taken into account, while kinetics are often ignored. This holds in particular for chemical kinetics, which are, other than those for charge carrier dynamics, often not at all considered for the interpretation of the catalysts' photocatalytic performance. However, while being usually neglected in photocatalyis, they are a traditional and powerful tool in thermal catalysis and are still applied with great success in this field. While surface science studies made substantial contributes to thermal catalysis, analogous studies in heterogeneous photocatalysis still play only a minor role. In this review, the authors show that the photo-physics of defined materials in well-defined environments can be correlated with photochemical events on a surface, highlighting the importance of well-characterized semiconductors for the interpretation of mechanisms in heterogeneous photochemistry. The work focuses on contributions from surface science, which were obtained for the model system of a titania single crystal and alcohol photo-reforming. It is demonstrated that only surface science studies have so far enabled the elucidation of molecularly precise reaction mechanisms, the determination of reaction intermediates and assignment of reactive sites. As the identification of these properties remain major prerequisites for a breakthrough in photocatalysis research, the work also discusses the implications of the findings for applied systems. In general, the results from surface science demonstrate that photocatalytic systems shall also be approached by a perspective originating from heterogeneous catalysis rather than solely from an electrochemical point of view.

The Role of Surface Texture on the Photocatalytic H2 Production on TiO2

It has been often reported that an efficient and green photocatalytic dissociation of water under irradiated semiconductors likely represents the most important goal for modern chemistry. Despite decades of intensive work on this topic, the efficiency of the water photolytic process under irradiated semiconductors is far from reaching significant photocatalytic efficiency. The use of a sacrificial agent as hole scavenger dramatically increases the hydrogen production rate and might represent the classic “kill two birds with one stone”: on the one hand, the production of hydrogen, then usable as energy carrier, on the other, the treatment of water for the abatement of pollutants used as sacrificial agents. Among metal oxides, TiO2 has a central role due to its versatility and inexpensiveness that allows an extended applicability in several scientific and technological fields. In this review we focus on the hydrogen production on irradiated TiO2 and its fundamental and environmental implications.

Synthesis and Characterization of Rh/B⁻TNTs as a Recyclable Catalyst for Hydroformylation of Olefin Containing ⁻CN Functional Group

The TiO₂-based nanotubes (TNTs, B⁻TNTs) of different surface acidities and their supported Rh catalysts were designed and synthesized. The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), tempera⁻ture⁻programmed desorption of ammonia (NH₃⁻TPD), atomic emission spectrometer (ICP), and Brunauer⁻Emmett⁻Tellerv (BET) surface-area analyzers. Images of SEM and TEM showed that the boron-decorated TiO₂ nanotubes (B⁻TNTs) had a perfect multiwalled tubular structure; their length was up to hundreds of nanometers and inner diameter was about 7 nm. The results of NH₃-TPD analyses showed that B⁻TNTs had a stronger acid site compared with TNTs. For Rh/TNTs and Rh/B⁻TNTs, Rh nanoparticles highly dispersed on B⁻TNTs were about 2.79 nm in average diameter and much smaller than those on TNTs, which were about 4.94 nm. The catalytic performances of catalysts for the hydroformylation of 2-methyl-3-butennitrile (2M3BN) were also evaluated, and results showed that the existence of B in Rh/B⁻TNTs had a great influence on the catalytic performance of the catalysts. The Rh/B⁻TNTs displayed higher catalytic activity, selectivity for aldehydes, and stability than the Rh/TNTs.