Facile preparation of Ni/Al2O3 catalytic formulations with the aid of cyclodextrin complexes: Towards highly active and robust catalysts for the direct amination of alcohols

Reversal Effect of Phosphorus on Catalytic Performances of Supported Nickel Catalysts in Reductive Amination of 1,6-Hexanediol

The reductive amination of 1,6-hexanediol with ammonia is one of the most promising green routes for synthesis of 1,6-hexanediamine. Herein, we developed a phosphorous modified Ni catalyst of Ni-P/Al2O3. It presented satisfactory improved selectivity to 1,6-hexanediamine in the reductive amination of 1,6-hexanediol compared to the Ni/Al2O3 catalyst. The phosphorous tended to interact with Al2O3 to form AlPOx species, induced Ni nanoparticle to be flatter, and the decrease of strong acid sites, the new-formed Ni-AlPOx-Al2O3 interface and the flatter Ni nanoparticle were the key to switch the dominating product from hexamethyleneimine to 1,6-hexanediamine. This work develops an efficient catalyst for production of 1,6-hexanediamine from the reductive amination of 1,6-hexanediol, and provides a point of view about designing selective non-noble metal catalysts for producing primary diamines via reductive amination of diols.

Precursor-Driven Catalytic Performances of Al2O3-Supported Earth-Abundant Ni Catalysts in the Hydrogenation of Levulinic Acid and Hydroxymethylfurfural into Added-Value Chemicals

It has been shown that the nature of the metal precursor and the thermal effects during calcination determine the physicochemical properties of the catalysts and their catalytic activity in the levulinic acid (LA) and 5-hydroxymethylfurfural (HMF) hydrogenation reactions. The endothermic effect during calcination of the inorganic nickel precursor promoted higher metal dispersion and stronger interaction with the alumina surface. In contrast, the exothermic effects during the calcination of organic nickel precursors resulted in smaller metal dispersion and lower interaction with the support surface. A clear relationship was found between the size of the metal crystallites and the yield of LA hydrogenation reaction. The smaller crystallites were more active in the LA hydrogenation reaction. In turn, the size of the metal particles and their nature of interaction with the surface of the alumina influence the hydrogenation pathways of the HMF.

Metal-organic framework-derived CoNx nanoparticles on N-doped carbon for selective N-alkylation of aniline

N-alkylation of anilines by alcohols can be used as an efficient strategy to synthesise a wide range of secondary amines. In this respect, a hydrogen borrowing methodology has been explored using precious metal-based catalysts. However, the utilisation of cheap and readily available transition metal based catalysts is required for large-scale applications. In this work, we have reported metal-organic framework-derived CoNx@NC catalysts for the selective N-alkylation of anilines with different types of alcohols. The Co-N coordination in CoNx@NC was found to be extremely important to improve the conversion efficiency and yield of the product. As a result, CoNx@NC produced 99% yield of the desired amines, which is far better than that of Co@C (yield = 65%). In addition, CoNx@NC showed remarkable recyclability for six cycles with a minimum drop in the yield of the desired product.

Hydrogen Borrowing: towards Aliphatic Tertiary Amines from Lignin Model Compounds Using a Supported Copper Catalyst

Upcoming biorefineries, such as lignin-first provide renewable aromatics containing unique aliphatic alcohols. In this context, a Cu-ZrO₂ catalyzed hydrogen borrowing approach was established to yield tertiary amine from the lignin model monomer 3-(3,4-dimethoxyphenyl)-1-propanol and the actual lignin-derived monomers, (3-(4-hydroxyphenyl)-1-propanol and dihydroconiferyl alcohol), with dimethylamine. Various industrial metal catalysts were evaluated, resulting in nearly quantitative mass balances for most catalysts. Identified intermediates, side and reaction products were placed into a corresponding reaction network, supported by kinetic evolution experiments. Cu-ZrO₂ was selected as most suitable catalyst combining high alcohol conversion with respectable aliphatic tertiary amine selectivity. Low pressure H₂ was key for high catalyst activity and tertiary amine selectivity, mainly by hindering undesired reactant dimethylamine disproportionation and alcohol amidation. Besides dimethylamine model, diverse secondary amine reactants were tested with moderate to high tertiary amine yields. As most active catalytic site, highly dispersed Cu species in strong contact with ZrO₂ is suggested. ToF-SIMS, N₂ O chemisorption, TGA and XPS of spent Cu-ZrO₂ revealed that imperfect amine product desorption and declining surface Cu lowered the catalytic activity upon catalyst reuse, while thermal reduction readily restored the initial activity and selectivity demonstrating catalyst reuse.

Reusable Co-nanoparticles for general and selective N-alkylation of amines and ammonia with alcohols

A general cobalt-catalyzed N-alkylation of amines with alcohols by borrowing hydrogen methodology to prepare different kinds of amines is reported. The optimal catalyst for this transformation is prepared by pyrolysis of a specific templated material, which is generated in situ by mixing cobalt salts, nitrogen ligands and colloidal silica, and subsequent removal of silica. Applying this novel Co-nanoparticle-based material, >100 primary, secondary, and tertiary amines including N-methylamines and selected drug molecules were conveniently prepared starting from inexpensive and easily accessible alcohols and amines or ammonia.

First Steps to Rationalize Host-Guest Interaction between α-, β-, and γ-Cyclodextrin and Divalent First-Row Transition and Post-transition Metals (Subgroups VIIB, VIIIB, and IIB)

Cyclodextrins (CDs) are cyclic oligosaccharides mainly composed of six, seven, and eight glucose units, so-called α-, β-, and γ-CDs, respectively. They own a very particular molecular structure exhibiting hydrophilic features thanks to primary and secondary rims and delimiting a hydrophobic internal cavity. The latter can encapsulate organic compounds, but the former can form supramolecular complexes by hydrogen-bonding or electrostatic interactions. CDs have been used in catalytic processes to increase mass transfer in aqueous-organic two-phase systems or to prepare catalysts. In the last case, interaction between CDs and metal salts was considered to be a key point in obtaining highly active catalysts. Up to now, no work was reported on the investigation of factors affecting the binding of metal to CD. In the study herein, we present the favorable combination of electrospray ionization coupled to mass spectrometry [ESI-MS(/MS)] and density functional theory molecular modeling [B3LYP/Def2-SV(P)] to delineate some determinants governing the coordination of first-row divalent transition metals (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Fe²⁺) and one post-transition metal (Zn²⁺) with α-, β-, and γ-CDs. A large set of features concerning the metal itself (ionic radius, electron configuration, and spin state) as well as the complexes formed (the most stable conformer, relative abundance in MS, CE₅₀ value in MS/MS, binding energy, effective coordination number, average bond lengths, binding site localization, bond dissociation energies, and natural bond orbital distribution) were screened. Taking into account all of these properties, various selectivity rankings have been delineated, portraying differential association/dissociation behaviors. Nonetheless, unique 3D topologies for each CD-metal complex were emphasized. The combination of these approaches brings a stone for building a compendium of molecular features to serve as a suitable descriptor or predictor for a better first round rationalization of catalytic activities.

Reductive amination of bio-based 2-hydroxytetrahydropyran to 5-Amino-1-pentanol over nano-Ni–Al2O3 catalysts

5-Amino-1-pentanol was efficiently synthesized by reductive amination of bio-based 2-hydroxytetrahydropyran with a high yield over stable nano-Ni–Al₂O₃ catalysts.

Oxidant free conversion of alcohols to nitriles over Ni-based catalysts

Ni-Based catalysts converting various primary alcohols to nitriles in high yields under oxidant-free, low temperature conditions.

Nanoceria-promoted low Pd–Ni catalyst for the synthesis of secondary amines from aliphatic alcohols and ammonia

Pd–Ni catalysts supported over nanoceria with very low Ni and Pd loading (<0.5 wt%) showed high activity and selectivity for the direct amination of 1-octanol with ammonia towards dioctylamine with 80% yield.

Catalytic amino acid production from biomass-derived intermediates

Today, amino acids are primarily manufactured via microbial cultivation processes, which are costly, are time consuming, and require extensive separations processes. As an alternative, chemocatalytic approaches to produce amino acids from renewable feedstocks such as bio-based sugars could offer a rapid and potentially more efficient means of amino acid synthesis, but efforts to date have been limited by the development of facile chemistry and associated catalyst materials to selectively produce α-amino acids. In this work, various α-amino acids, including alanine, leucine, aspartic acid, and phenylalanine, were obtained from both biomass-derived α-hydroxyl acids and glucose. The route bridges plant-based biomass and proteinogenic α-amino acids, offering a chemical approach that is potentially superior to microbial cultivation processes.

Amino acids are the building blocks for protein biosynthesis and find use in myriad industrial applications including in food for humans, in animal feed, and as precursors for bio-based plastics, among others. However, the development of efficient chemical methods to convert abundant and renewable feedstocks into amino acids has been largely unsuccessful to date. To that end, here we report a heterogeneous catalyst that directly transforms lignocellulosic biomass-derived α-hydroxyl acids into α-amino acids, including alanine, leucine, valine, aspartic acid, and phenylalanine in high yields. The reaction follows a dehydrogenation-reductive amination pathway, with dehydrogenation as the rate-determining step. Ruthenium nanoparticles supported on carbon nanotubes (Ru/CNT) exhibit exceptional efficiency compared with catalysts based on other metals, due to the unique, reversible enhancement effect of NH₃ on Ru in dehydrogenation. Based on the catalytic system, a two-step chemical process was designed to convert glucose into alanine in 43% yield, comparable with the well-established microbial cultivation process, and therefore, the present strategy enables a route for the production of amino acids from renewable feedstocks. Moreover, a conceptual process design employing membrane distillation to facilitate product purification is proposed and validated. Overall, this study offers a rapid and potentially more efficient chemical method to produce amino acids from woody biomass components.

Recent progress in improving the stability of copper-based catalysts for hydrogenation of carbon–oxygen bonds

Five different strategies to enhance the stability of Cu-based catalysts for hydrogenation of C–O bonds are summarized in this review.

Ru and Ag promoted Co/Al2O3 catalysts for the gas-phase amination of aliphatic alcohols with ammonia

The present paper describes the synthesis of primary amines from long-chain aliphatic alcohols and ammonia using alumina-supported noble metal doped cobalt formulations with moderate cobalt loading (5 wt%).