Competitive immunoassay for clenbuterol using capillary electrophoresis with laser-induced fluorescence detection

A molecularly imprinted electrochemiluminescence nanoprobe based on complexes consisting of CdTe and multiwall carbon nanotube for sensitive determination of clenbuterol

An electrochemiluminescence (ECL) nanoprobe was fabricated for the determination of clenbuterol (CLB). A molecularly imprinted polymer (MIP) film was coated on the surface of the glassy carbon electrode modified with CdTe-doped multiwall carbon nanotubes. The MIP film with CLB as the template molecule improves the selectivity of the nanoprobe, CdTe is used as ECL signal amplifier, and MWCNT works as the carrier. The ECL intensity is altered by elution and reabsorption of CLB. The possible reaction mechanism and experimental parameters of the nanoprobe are discussed. Under optimized conditions, the quenched ECL intensity and the CLB concentration have a linear relationship in the range 2.3 × 10^-9 to 1.5 × 10^-5 mol·L^-1, and the detection limit is 1.0 × 10^-9 mol·L^-1 (S/N = 3). The nanoprobe was successfully applied to the determination of CLB in pork samples. Graphical abstract Schematic representation of the molecularly imprinted electrochemiluminescence nanoprobe based on complexes consisting of CdTe and multiwall carbon nanotube used to determinate clenbuterol.

Capillary electrophoresis-based immunoassay and aptamer assay: A review

Over the last two decades, the group of techniques called affinity probe CE has been widely used for the detection and the determination of several types of biomolecules with high sensitivity. These techniques combine the low sample consumption and high separation power of CE with the selectivity of the probe to the target molecule. The assays can be defined according to the type of probe used: CE immunoassays, with an antibody as the probe, or aptamer-based CE, with an aptamer as the probe. Immunoassays are generally divided into homogeneous and heterogeneous groups, and homogeneous variant can be further performed in competitive or noncompetitive formats. Interacting partners are free in solution at homogeneous assay, as opposed to heterogeneous analyses, where one of them is immobilized onto a solid support. Highly sensitive fluorescence, chemiluminescence or electrochemical detections were typically used in this type of study. The use of the aptamers as probes has several advantages over antibodies such as shorter generation time, higher thermal stability, lower price, and lower variability. The aptamer-based CE technique was in practice utilized for the determination of proteins in biological fluids and environmentally or clinically important small molecules. Both techniques were also transferred to microchip. This review is focused on theoretical principles of these techniques and a summary of their applications in research.

Development of Polyclonal Antibody against Clenbuterol for Immunoassay Application

Development of an immunoassay for clenbuterol (CLB) detection required an anti-CLB antibody as an important bioreceptor. In this study, we report our work on production and purification of a rabbit-derived polyclonal anti-CLB antibody. The antibody was then purified by nProtein A Sepharose affinity column and the antibody purity was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis. The activities of purified antibody were evaluated based on high antibody titer determined from enzyme-linked immunosorbent assay (ELISA). The sensitivity and selectivity of this antibody was evaluated and exhibits negligible cross-reactivity to antibiotics other than β-agonist families. Evaluation of the antibody as bioreceptor in immunoassay was performed using direct competitive ELISA and exhibited linear calibration plot (R² = 0.9484). The antibody was used to detect the content of CLB in spiked milk samples and the recovery of more than 92% indicating significant performance as bioreceptor for the development of a rapid and simple immunoassay.

Noble metal nanostructures in optical biosensors: Basics, and their introduction to anti-doping detection

Nanotechnology has illustrated significant potentials in biomolecular-sensing applications; particularly its introduction to anti-doping detection is of great importance. Illicit recreational drugs, substances that can be potentially abused, and drugs with dosage limitations according to the prohibited lists announced by the World Antidoping Agency (WADA) are becoming of increasing interest to forensic chemists. In this review, the theoretical principles of optical biosensors based on noble metal nanoparticles, and the transduction mechanism of commonly-applied plasmonic biosensors are covered. We review different classes of recently-developed plasmonic biosensors for analytic determination and quantification of illicit drugs in anti-doping applications. The important classes of illicit drugs include anabolic steroids, opioids, stimulants, and peptide hormones. The main emphasis is on the advantages that noble metal nano-particles bring to optical biosensors for signal enhancement and the development of highly sensitive (label-free) biosensors. In the near future, such optical biosensors may be an invaluable substitute for conventional anti-doping detection methods such as chromatography-based approaches, and may even be commercialized for routine anti-doping tests.

Enhancing a clenbuterol immunosensor based on poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube performance using response surface methodology

A clenbuterol immunosensor was developed with a poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube-modified screen-printed carbon electrode and optimized using response surface methodology.

Clenbuterol Hydrochloride

Clenbuterol (Broncodil and trade) is a direct-acting sympathomimetic agent with mainly beta-adrenergic activity and a selective action on β2 receptors (a β2 agonist). It has properties similar to those of salbutamol. It is used as a bronchodilator in the management of reversible airways obstruction, as in asthma and in certain patients with chronic obstructive pulmonary disease. The uses, applications, and the synthetic pathways of this drug are outlined. Physical characteristics including: ionization constant, solubility, X-ray powder diffraction pattern, thermal methods of analysis, UV spectrum, IR spectrum, mass spectrum are all produced. This profile also includes the monograph of British Pharmacopoeia, together with several reported analytical methods including spectrophotometric, electrochemical, chromatographic, immunochemical methods, and capillary electrophoretic methods. The stability, the pharmacokinetic behavior, and the pharmacology of the drug are also provided.

Clinical applications of capillary electrophoresis based immunoassays

Immunoassays have long been an important set of tools in clinical laboratories for the detection, diagnosis, and treatment of disease. Over the last two decades, there has been growing interest in utilizing CE as a means for conducting immunoassays with clinical samples. The resulting method is known as a CE immunoassay. This approach makes use of the selective and strong binding of antibodies for their targets, as is employed in a traditional immunoassay, and combines this with the speed, efficiency, and small sample requirements of CE. This review discusses the variety of ways in which CE immunoassays have been employed with clinical samples. An overview of the formats and detection modes that have been employed in these applications is first presented. A more detailed discussion is then given on the type of clinical targets and samples that have been measured or studied by using CE immunoassays. Particular attention is given to the use of this method in the fields of endocrinology, pharmaceutical measurements, protein and peptide analysis, immunology, infectious disease detection, and oncology. Representative applications in each of these areas are described, with these examples involving work with both traditional and microanalytical CE systems.

Analytical methods for the detection of clenbuterol

Clenbuterol is therapeutically used for the treatment of pulmonary diseases such as bronchial asthma or for tocolytic reasons. In cattle feeding as well as in sports it is illicitly misused due to its anabolic properties to promote muscle growth. Sample preparation procedures and analytical techniques used for the detection of clenbuterol are manifold and vary with the objectives of the investigation. Methods for its detection in biological specimens, drug preparations, the environment, food and feed products are reported. They are mainly based on immunochemical, chromatographic and mass spectrometric techniques, or on capillary electrophoresis. Sample preparation primarily includes liquid-liquid extraction and solid-phase extraction. Depending on the aim of the method clenbuterol can be determined in single- or multi-analyte methods. In biological and environmental samples concentrations are generally low due to the potency of the drug. Thus, highly sensitive procedures are required for expedient analyses.

Integrated microfluidic immunoassay for the rapid determination of clenbuterol

An integrated microfluidic immunoassay system was established for high throughput analysis of clenbuterol. This system consisted of an integrated microchip and a linear confocal laser induced fluorescence (LIF) scanner. The microchip was composed of three layers: a fluidic channel layer, a PDMS membrane layer and a pneumatic control layer. The multi-layer chip was integrated with 36 pneumatic micro-valves and multiple micro-pumps to realize the flexible reagent delivery, facilitating the automatic assays with less consumption of samples and reduced analysis time. The homemade LIF scanner was able to simultaneously detect multi-channels and provide the potential capability of high throughput assays. The performance of the system was demonstrated by the determination of clenbuterol, one of the most widely used beta-agonists. Under the optimal conditions, the linear range and the limit of detection of clenbuterol were 0 approximately 5.0 ng mL(-1) and 0.088 ng mL(-1), respectively. The recovery rates determined with pig urine samples of 1.0 ng mL(-1) and 2.0 ng mL(-1) were 98.74% and 102.51% (n = 3), respectively. The total detection time was less than 30 min. The system had the potential application for rapid detection of multiple beta-agonists in clinical, pharmaceutical and chemical analyses.

Capillary electrophoresis-based immunoassays: principles and quantitative applications

The use of CE as a tool to conduct immunoassays has been an area of increasing interest over the last decade. This approach combines the efficiency, small sample requirements, and relatively high speed of CE with the selectivity of antibodies as binding agents. This review examines the various assay formats and detection modes that have been reported for these assays, along with some representative applications. Most CE immunoassays in the past have employed homogeneous methods in which the sample and reagents are allowed to react in solution. These homogeneous methods have been conducted as both competitive binding immunoassays and as noncompetitive binding immunoassays. Fluorescent labels are most commonly used for detection in these assays, but enzyme labels have also been utilized for such work. Some additional work has been performed in CE immunoassays with heterogeneous methods in which either antibodies or an analog of the analyte is immobilized to a solid support. These heterogeneous methods can be used for the selective isolation of analytes prior to their separation by CE or to remove a given species from a sample/reagent mixture prior to analysis by CE. These CE immunoassays can be used with a variety of detection modes, such as fluorescence, UV/Vis absorbance, chemiluminescence, electrochemical measurements, MS, and surface plasmon resonance.

Development of a capillary electrophoresis-based immunoassay with laser-induced fluorescence for the detection of carbaryl in rice samples

A capillary electrophoresis-based competitive immunoassay (CEIA) with a laser-induced fluorescence (LIF) detector for the determination of carbaryl was developed. The method was based on the competitive reactions between fluorescently labeled carbaryl tracer (Ag*) and free carbaryl (Ag) with a limited amount of anticarbaryl antibody (Ab), and the relative amounts of each were separated and determined by capillary electrophoresis (CE) with an LIF detector. Using CEIA, equilibrium was reached in 30 min, and the analytical results were obtained within a further 8 min. The linear range and the detection limit for carbaryl were 0.16-50 ng/mL and 0.05 ng/mL, respectively. The sensitivity of this CEIA with an LIF detector was almost 14 times greater than that of ELISA, which used the same immuno-reagents. The method was also applied to the analysis of carbaryl in rice with rapid and simple sample pretreatment. The method is thus proposed as a fast and sensitive assay for the detection of carbaryl.