Optimized extraction method for LC–MS determination of bisphenol A, melamine and di(2-ethylhexyl) phthalate in selected soft drinks, syringes, and milk powder

A novel approach for identifying melamine adulteration in powdered milk with E-nose and AI

Dairy products are exceptionally nutritious and a key component of our diet. They are utilized in a wide range of food industries due to their significance. However, being highly popular and valuable, they are among the most common products subject to adulteration. Melamine is a chemical compound deliberately added to various food products. It is used to artificially increase the apparent protein content in milk, milk powder, pet food, and other foods. In this study, pure milk powder along with 12 different types of adulterated samples (with melamine content of 1, 2, 3, 4, and 5 ppm) in both dry and wet forms was analyzed using an electronic nose equipped with 8 metal oxide sensors to detect adulteration patterns. Principal Component Analysis (PCA), discriminant analysis (DA), and Support Vector Machine (SVM) methods were employed to analyze sensor response patterns and classification. Quantitative Descriptive Analysis (QDA) yielded a precision of 99.5 %, while Multi-Discriminant Analysis (MDA) achieved a precision of 98.5 %. Therefore, it appears that electronic nose technology with metal oxide sensors, along with chemometric methods, can be a truly effective tool for the rapid detection and classification of pure milk powder from adulterated materials.

Recent advancements in the extraction and analysis of phthalate acid esters in food samples

Phthalate acid esters (PAEs) are ubiquitous environmental pollutants present in food samples, necessitating accurate detection for risk assessment and remediation efforts. This review provides an updated overview of the recent progress on the PAEs analysis regarding sample pretreatment techniques and analytical methodologies over the latest decade. Advances in sample preparation include solid-based extraction techniques replacing conventional liquid-liquid extraction, with solid sorbents emerging as promising alternatives due to their minimal solvent consumption and enhanced selectivity. Although techniques like the microextraction methods offer versatility and reduced solvent reliance, there is a need for more efficient and environmentally friendly techniques enabling on-site portable detection. High-resolution mass spectrometry is increasingly utilized for its enhanced sensitivity and reduced contamination risks. However, challenges persist in developing in situ analytical techniques for trace PAEs in complex food samples. Future research should prioritize novel analytical techniques with superior sensitivity and selectivity, addressing current limitations to meet the demand for precise PAEs detection in diverse food matrices.

Assessing dietary bisphenol A exposure among Koreans: comprehensive database construction and analysis using the Korea National Health and Nutrition Examination Survey

Bisphenol A (BPA) exposure primarily occurs through dietary intake. This study aimed to estimate the extent of dietary BPA exposure among Koreans. A thorough literature search was conducted to establish a BPA content database encompassing common foods consumed in Korea, including various food raw materials and processed food products. Dietary exposure levels were estimated by integrating the constructed BPA database with comprehensive nationwide 24 h-dietary recall datasets. The finding revealed that dietary BPA exposure was low for most Koreans, with a mean of 14.5 ng/kg bw/day, but was higher for preschool-age children (over 23 ng). Canned foods accounted for 9-36% of the total dietary exposure of the highest dietary exposure groups; while across all age groups, a considerable amount was derived from canned tuna, contribution of canned fruits and canned coffee (milk-containing) was high for preschool-age children and adults, respectively. Notably, for adults, a substantial proportion also stemmed from beer packaged in cans. While diet contributed over 80% of aggregate exposure for most age groups, preschool-age children experienced 60% exposure through diet due to additional exposure from indoor dust. Even at the high exposure scenario, aggregate BPA exposure levels remained lower than the current tolerable daily intake (TDI) set by the Korean agency (20 μg/kg bw/day). Nevertheless, most Koreans were exposed to BPA levels surpassing the strictest TDI (0.2 ng/kg bw/day) set by the European Food Safety Authority.

Biochar supported Pseudomonas putida based globules for effective removal of Bisphenol A with a practical approach

The widespread and inevitable use of plastic has led to prospective ecological problems through Bisphenol A (BPA), a synthetic chemical in plastic manufacturing. The present study addresses a unique methodology for eliminating BPA using the assistance of Pseudomonas putida. In the present work, biomass was torrefied to generate biochar with highly porous networks that could accommodate the bacterial species for effective colonization and multiplication. The designed biochar-bacterial globules demonstrated the ability to effectively remove BPA (96.88%) at a concentration of up to 2 g/L. The biochar-bacterial globules could effectively adsorb BPA at a low concentration of 20 mg/L. The alteration in pH did not impact the globule's performance, providing additional support for the practical utilization of these globules in polluted water bodies. In addition, the biochar-bacterial globules exhibited superior effectiveness in degradation compared to the standard levels, particularly in saline conditions. The simplicity and effectiveness of the approach make it promising for real-world implementation in addressing ecological problems associated with BPA contamination.

Exposure to endocrine disrupting chemicals from beverage packaging materials and risk assessment for consumers

This study investigated the influence of beverage packaging materials on the presence of endocrine disrupting chemicals (EDCs) in plastic, glass, carton, aluminium, and tin canned non-alcoholic beverages. Results showed that 63 EDCs including perfluoroalkyl and polyfluoroalkyl substances (PFAS), bisphenols, parabens, benzophenone-type UV-filters, biocides, nitrophenols, and alkylphenols, were detected in 144/162 screened products. Detected ∑63EDC concentrations ranged from 1.3 to 19,600 ng/L. EDC concentrations were higher in beverages packaged in metal cans while lower or no levels were detected in glass, plastic, and carton packaged drinks. Bisphenol levels were higher on average in canned beverages compared to glass (p < 0.01) and plastic products (p < 0.05) produced by the same brand and manufacturer. Two structural isomers of bisphenol A (BPA) were identified in 19 beverages, constituting the first detection in foodstuffs. The calculated daily intake of detected EDCs showed that exposure to BPA from per capita beverage consumption of 364 mL/day are up to 2000-fold higher than the newly revised safety guideline for BPA recommended by the EFSA (European Food Safety Authority). Overall, these findings suggest that BPA exposure poses a potential health hazard for individuals who regularly consume non-alcoholic beverages packaged in aluminium or tin cans, particularly young children.

BPA Endocrine Disruptor Detection at the Cutting Edge: FPIA and ELISA Immunoassays

BPA is a chemical commonly used in the production of polymer-based materials that can have detrimental effects on the thyroid gland and impact human reproductive health. Various expensive methods, such as liquid and gas chromatography, have been suggested for detecting BPA. The fluorescence polarization immunoassay (FPIA) is an inexpensive and efficient homogeneous mix-and-read method that allows for high-throughput screening. FPIA offers high specificity and sensitivity and can be carried out in a single phase within a timeframe of 20-30 min. In this study, new tracer molecules were designed that linked the fluorescein fluorophore with and without a spacer to the bisphenol A moiety. To assess the influence of the C6 spacer on the sensitivity of an assay based on the respective antibody, hapten-protein conjugates were synthesized and assessed for performance in an ELISA setup, and this resulted in a highly sensitive assay with a detection limit of 0.05 g/L. The lowest limit of detection was reached by employing the spacer derivate in the FPIA and was 1.0 μg/L, working range from 2 to 155 μg/L. The validation of the methods was conducted using actual samples compared to LC-MS/MS, which served as the reference method. The FPIA and ELISA both demonstrated satisfactory concordance.

Leaching of Phthalates from Medical Supplies and Their Implications for Exposure

In this study, 72 single-use medical products, grouped into four categories, namely, creams/liquids (n = 8), medical devices (n = 46; 15 of 46 labeled "di(2-ethylhexyl)phthalate (DEHP)-free"), first aid products (n = 13), and intravenous (IV) infusion/irrigation fluids (n = 5), were collected from an intensive care unit in a hospital in New York State in 2015 and analyzed for the migration of 10 phthalates in ethanol/water (1:1) mixture for 1 h. The total phthalate concentration (Σphthalates) leached from medical products ranged from 0.04 to 54,600 μg. DEHP was the major phthalate found in 99% of the samples analyzed, with the highest amount leached from respiratory support devices (median: 6560 μg). DEHP was also found at notable concentrations in products labeled as "DEHP-free". Direct exposure to phthalates from the use of medical devices and first aid supplies and dermal intake from the use of creams/lotions were calculated. The highest DEHP exposure dose of 730 μg/kg bw/day was determined from the use of cannula for neonates. This is the first study to document the amount of phthalates leached from various medical supplies and associated exposures.

Magnetite azolla impedimetric nanobiosensor for phthalic acid esters quantification

Phthalic acid esters (PAEs) are a group of organic compounds that show vulnerability effects in different stages of human development. In this work, two sensitive and efficient impedimetric biosensors (IBs) were introduced and their interactions with four PAEs, namely dibutyl phthalate (DBP), dimethyl phthalate (DMP), di(2-ethylhexyl) phthalate (DEHP), and dicyclohexyl phthalate (DCHP), in aqueous solutions with these biosensors were separately investigated via electrochemical impedance spectroscopy (EIS). The surface of a copper electrode was modified by azolla fern dried powder (AZ) and magnetite-modified azolla nanocomposites (MAZ NCs) to form an azolla-based impedimetric biosensor (AZIB) and magnetite azolla nanocomposite-based impedimetric nanobiosensor (MAZIB), respectively. Determinations of PAEs with the designed biosensors were conducted based on their blocking effect on the biosensor surface to ferrous ions oxidation. After each impedimetric measurement, the electrode surface was covered again with the modifier. Nyquist plots were obtained and indicated that the charge-transfer resistance (R_CT) values of the bare electrode, AZIB, and MAZIB without injection of PAEs were 468.8, 438.7, and 285.1 kΩ, respectively. After the separate injection of DBP, DMP, DEHP, and DCHP (3 μg L^-1) on the surface of AZIB and MAZIB, R_CT values were obtained as 563.9, 588.5, 548.7, and 570.1 kΩ for AZIB and 878.2, 1219.2, 754.3, and 814.7 kΩ for MAZIB, respectively. It was observed that the PAE blockers with a smaller structure provided better point-by-point coverage of the surface, which led to a bigger shift in R_CT. The linear relationship between the EIS responses and each PAE concentration was investigated in the range of 0.1-1000 μg L^-1. The limit of detection (LOD) and limit of quantification (LOQ) values were obtained in the ranges of 0.003-0.005 μg L^-1 and 0.010-0.016 μg L^-1 for AZIB and 0.008-0.009 μg L^-1 and 0.027-0.031 μg L^-1 for MAZIB, respectively. The results showed that these biosensors can be used to determine PAEs in real aqueous samples with good relative recoveries ranging from 93.0-97.7% (RSD < 2.58%) for AZIB and 93.3-99.3% (RSD < 2.45%) for MAZIB. The results confirmed that these impedimetric biosensors offer high sensitivity and performance for the determination of trace PAEs in aqueous samples.

The First Evidence on the Occurrence of Bisphenol Analogues in the Aqueous Humor of Patients Undergoing Cataract Surgery

Human exposure to BPs is inevitable mostly due to contaminated food. In this preliminary study, for the first time, the presence of bisphenols (BPs) in aqueous humor (AH) collected from 44 patients undergoing cataract surgery was investigated. The measurements were performed using a sensitive ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC−MS/MS). Chromatographic separation was achieved using a reverse-phase column and a gradient elution mode. Multiple reaction monitoring (MRM) was used. The method was validated for bisphenol A (BPA) and bisphenol F (BPF). The limits of quantification (LOQs) of both investigated analytes were 0.25 ng mL−1. The method was linear in the range of 0.25−20.0 ng mL−1 with correlation coefficients (R2) higher than 0.98. Recovery of analytes was in the range of 99.9 to 104.3% and intra-assay and inter-assay precision expressed by relative standard deviations (RSD%) were less than 5%. BPA was detected in 12 AH samples with mean concentrations of 1.41 ng mL−1. BPF was not detected at all. Furthermore, two structural isomers termed BPA-1, and BPA-2 were identified, for the first time, in 40.9% of the AH samples, with almost twice higher mean concentrations of 2.15 ng mL−1, and 2.25 ng mL−1, respectively. The total content of BPs were higher in patients with coexisting ocular pathologies such as glaucoma, age-related macular degeneration (AMD), and diabetes in comparison to cataracts alone. However, the difference between these groups did not reach statistical significance (p > 0.05). Performed investigations indicate the need for further research on a larger population with the aim of knowing the consequences of BPs’ accumulation in AH for visual function.

Food-Borne Chemical Carcinogens and the Evidence for Human Cancer Risk

Commonly consumed foods and beverages can contain chemicals with reported carcinogenic activity in rodent models. Moreover, exposures to some of these substances have been associated with increased cancer risks in humans. Food-borne carcinogens span a range of chemical classes and can arise from natural or anthropogenic sources, as well as form endogenously. Important considerations include the mechanism(s) of action (MoA), their relevance to human biology, and the level of exposure in diet. The MoAs of carcinogens have been classified as either DNA-reactive (genotoxic), involving covalent reaction with nuclear DNA, or epigenetic, involving molecular and cellular effects other than DNA reactivity. Carcinogens are generally present in food at low levels, resulting in low daily intakes, although there are some exceptions. Carcinogens of the DNA-reactive type produce effects at lower dosages than epigenetic carcinogens. Several food-related DNA-reactive carcinogens, including aflatoxins, aristolochic acid, benzene, benzo[a]pyrene and ethylene oxide, are recognized by the International Agency for Research on Cancer (IARC) as causes of human cancer. Of the epigenetic type, the only carcinogen considered to be associated with increased cancer in humans, although not from low-level food exposure, is dioxin (TCDD). Thus, DNA-reactive carcinogens in food represent a much greater risk than epigenetic carcinogens.

Surface blocking of azolla modified copper electrode for trace determination of phthalic acid esters as the molecular barricades by differential pulse voltammetry: response surface modelling optimized biosensor

In this work, a sensitive and efficient voltammetric biosensor was introduced for differential pulse voltammetric (DPV) determination of dibutyl phthalate, dimethyl phthalate, di(2-ethylhexyl)phthalate and dicyclohexyl phthalate in aqueous solutions.

Selective enrichment-release of trace dibutyl phthalate via molecular-imprinting based photo-controlled switching followed by high-performance liquid chromatography analysis

A novel intelligent photo-controlled molecularly imprinted polymers were synthesized, based on the magnetic core-shell structure, with 4-[(4-methacryloyloxy) phenylazo] benzenesulfonic acid as the functional monomer and ethylene glycol dimethyl acrylate as the cross-linking agent. Subsequently, a series of light-controlled enrichment-release performance showed that it only took about 30 and 10 min to reach the equilibrium photosensitive characteristic peak, respectively. The photo-controlled polymers could intelligently select target molecules, the maximum adsorption capacity for dibutyl phthalate was 3.88 mg/g. However, the adsorption capacity for its structural analogue dicyclohexyl phthalate was only 0.88 mg/g. The Freundlich and Langmuir isothermal equations were discussed for the specific enrichment process. Finally, the photo-controlled molecularly imprinted polymers were successfully applied to the selective detection of dibutyl phthalate, with the recovery rate of 95.4-98.4%. It could be used for the analysis of trace dibutyl phthalate in actual samples.

Evaluation of estrogenic chemicals in capsule and French press coffee using ultra-performance liquid chromatography with tandem mass spectrometry

•

Liquid chromatography with tandem mass spectrometry detected estrogenic chemicals in coffee.

•

The potential risk to health is likely to be low relative to established guidelines.

•

Future studies should evaluate the health risk from chronic coffee consumption.

The objective of this study was to examine exposure to estrogenic chemicals (ECs) via capsule coffee. Twenty-two brands of capsule coffee and 15 brands of French press coffee for comparison were brewed, and their contents of ECs were identified and quantified using ultra-performance liquid chromatography with tandem mass spectrometry. Exposure to ECs in coffee were compared to tolerable daily intake guidelines to assess potential hazard to health. Benzophenone was the most frequently detected EC in capsule coffee (mean concentration ± SD: 20.37 ± 47.07 ng/mL, n = 6), followed by bisphenol A (BPA, 0.31 ± 0.71, n = 4), dibutyl phthalate (1.41 ± 3.58, n = 3), 4-nonylphenol (0.67 ± 1.82, n = 3) and bisphenol F (BPF, 0.49 ± 1.54, n = 2). BPA and BPF were each detected in 3 French press coffee samples (0.29 ± 0.58 and 0.85 ± 1.75 ng/mL, respectively). Two French press coffee brands purchased as ground coffee rather than whole bean were positive for ECs (BPA in one and BPF in both). Hazard indexes were below 1.0 for each EC for both coffee types. These results indicate that there is EC contamination in capsule and French press coffee, but the quantities of ECs are low relative to established safety guidelines.

A simple magnetic solid-phase extraction method based on magnetite/graphene oxide nanocomposite for pre-concentration and determination of melamine by high-performance liquid chromatography

In this study, a clean and simple magnetic solid-phase extraction (MSPE) procedure using magnetite/graphene oxide nanocomposite as an adsorbent was developed for melamine separation and preconcentration from water and dairy products. After synthesis and characterization of the adsorbent, adsorption isotherms and kinetic studies of the adsorption were carried out. The analyte quantification was performed by reversed phase high-performance liquid chromatography after elution of the preconcentrated analytes from the adsorbent surface. Several factors affecting the extraction/preconcentration procedure such as pH, adsorbent amount, extraction time, sample volume, type, and volume of eluent were investigated. The optimizing of some important parameters was assessed by employing a response surface method. The constructed calibration curve in the optimized conditions is linear in the working range of 0.10-100 μg L^-1 with a correlation coefficient of 0.9999. The detection limit, limit of quantification, and enrichment factor are 0.03 μg L^-1, 0.10 μg L^-1, and 500, respectively. The melamine relative recoveries from different real samples are between 97.20 and 103.10% with relative standard deviations of 1.07-4.98%.

A Method Validation for Simultaneous Determination of Phthalates and Bisphenol A Released from Plastic Water Containers

Phthalates (or phthalate esters, PAEs) and bisphenol A (BPA) are widely used in various industries, particularly in the fields of cosmetics and packaging, and they increase the malleability and workability of materials. As a result of their use, some international health organizations have begun to study them. In this study, the authors developed a methodology for the simultaneous determination of dimethyl phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DiBP); dibutyl phthalate (DBP), bis(2-ethylhexyl) phthalate (DEHP); di-n-octyl-phthalate (DnOP) and bisphenol A (BPA) from drinking and non-potable waters. The extraction of PAEs and BPA was performed using a solvent-based dispersive liquid–liquid microextraction (SB-DLLME) method. The analytical determination was performed using a gas chromatography–ion trap mass spectrometry (GC-IT/MS) analysis. The entire procedure was validated as recoveries were studied according to the volume and the extraction solvent used, pH, and ionic strength. Dynamic linearity ranges and linear equations of all the compounds were experimentally determined as well as the limit of detection (LOD) (1–8 ng mL−1) and the limit of quantification (LOQ) (5–14 ng mL−1), reproducibility, and sensitivity. The method was applied to 15 water samples (mineral water and tap water) for determining PAEs and BPA released from the plastic container. After the release simulation, four PAEs (i.e., DiBP, DBP, DHEP, and DnOP) were determined at very low concentrations (below 1.2 ng mL−1) in two water samples from (sport) bottles.

Facile detection of melamine by a FAM-aptamer-G-quadruplex construct

The development of a novel method for melamine detection that uses a FAM-aptamer-G-quadruplex construct due to the efficient quenching ability of an aptamer-linked G-quadruplex is reported herein. The construct, which is labeled with the fluorescent dye 6-carboxyfluorescein (FAM), consists of two parts: a melamine-binding aptamer and a G-rich sequence that can form a G-quadruplex structure. Because of the specific recognition of melamine by the T-rich aptamer, this aptamer folds into a hairpin structure in the presence of melamine, which draws the G-quadruplex closer to the FAM fluorophore, leading to the quenching of the fluorescence of FAM. Thus, a highly sensitive and selective fluorescence strategy for assaying melamine was established. Under optimal conditions, the fluorescence quenching is proportional to the concentration of melamine within the range 10-90 nM, and the method has a detection limit of 6.32 nM. Further application of the method to plastic cup samples suggested that it permitted recoveries of between 97.15% ± 1.02 and 101.92% ± 2.07. The detected amounts of melamine spiked into the plastic cup samples and the corresponding amounts measured by HPLC were in good accordance, indicating that this fluorescent method is reliable and practical. Owing to its high sensitivity, excellent selectivity, and convenient procedure, this strategy represents a promising alternative method of melamine screening. Graphical abstract.

Preparation and characterization of molecularly imprinted solid-phase extraction column coupled with high-performance liquid chromatography for selective determination of melamine

We synthesized a selective molecularly imprinted solid-phase extraction (MIP-SPE) column and established an extraction and enrichment method using this MIP-SPE column. By coupling with HPLC, we developed a new method to detect trace amounts of melamine in eggs. The MIP-SPE column was synthesized by in situ thermal-initiated polymerization using melamine as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker and azodiisobutyronitrile as the initiator. HPLC was used to evaluate the identification and enrichment capability of the MIP-SPE column and for the measurement of melamine in the sample. The melamine concentration exhibited an excellent linear relationship in the range of 0.1-25.0 µg ml-1 (r = 0.9983). The identification capability of the MIP-SPE column was apparently superior to that of the non-imprinted polymer solid-phase extraction column; an average enrichment factor of 46.8-fold (RSD = 3.5%) was obtained for 0.4 µg ml-1 melamine by the MIP-SPE column. When the MIP-SPE HPLC method was applied to the detection of melamine in eggs, an average recovery rate of 93.5-102.0% (RSD = 3.6-4.9%) and a limit of detection of 0.05 µg kg-1 were obtained. This method is simple, fast and cost-effective; thus, it can greatly simplify the pre-treatment of complex samples and can be used in the detection of residual melamine in eggs and other products.

In Situ Determination of Bisphenol A in Beverage Using a Molybdenum Selenide/Reduced Graphene Oxide Nanoparticle Composite Modified Glassy Carbon Electrode

Due to the endocrine disturbing effects of bisphenol A (BPA) on organisms, rapid detection has become one of the most important techniques for monitoring its levels in the aqueous solutions associated with plastics and human beings. In this paper, a glassy carbon electrode (GCE) modified with molybdenum selenide/reduced graphene oxide (MoSe₂/rGO) was fabricated for in situ determination of bisphenol A in several beverages. The surface area of the electrode dramatically increases due to the existence of ultra-thin nanosheets in a flower-like structure of MoSe₂. Adding phosphotungstic acid in the electrolyte can significantly enhance the repeatability (RSD = 0.4%) and reproducibility (RSD = 2.2%) of the electrode. Under the optimized condition (pH = 6.5), the linear range of BPA was from 0.1 μM⁻100 μM and the detection limit was 0.015 μM (S/N = 3). When using the as-prepared electrode for analyzing BPA in beverage samples without any pretreatments, the recoveries ranged from 98⁻107%, and the concentrations were from below the detection limit to 1.7 μM, indicating its potential prospect for routine analysis of BPA.

Facts about phthalate toxicity in humans and their occurrence in alcoholic beverages

Phthalates are esters of phthalic acid and aliphatic alcohol added to plastic to improve its softness, flexibility, and extensibility. They easily migrate from plastic products into the environment because of their physical and chemical properties. This review summarises their characteristics, distribution in the environment, monitoring, use, toxic effects on human health, regulatory limits in different matrices and products, and tolerable daily intake. The studies we have reviewed suggest that phthalates have a potential to affect reproduction and development in humans. Due to the inconsistent data, further studies are needed and, in the meantime, precautionary policies must be implemented. Here we draw attention to the methods of determining phthalate levels in alcoholic beverages and reported levels in plum spirits produced in Croatia. Legally produced and moderately consumed plum spirits do not seem to increase the risk of phthalate toxicity for human health. We conclude with recommendations for the effective monitoring of phthalate exposure in humans and for the implementation of alternative materials in alcohol production.

Assessing the concentration of phthalate esters (PAEs) and bisphenol A (BPA) and the genotoxic potential of treated wastewater (final effluent) in Saudi Arabia

Plasticizers such as phthalate esters (PAEs) and bisphenol A (BPA) are highly persistent organic pollutants that tend to bio-accumulate in humans through the soil-plant-animal food chain. Some studies have reported the potential carcinogenic and teratogenic effects in addition to their estrogenic activities. Water resources are scarce in Saudi Arabia, and several wastewater treatment plants (WTPs) have been constructed for agricultural and industrial use. This study was designed to: (1) measure the concentrations of BPA and six PAEs, dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), bis (2-ethylhexyl) phthalate (DEHP) and dioctyl phthalate (DOP), in secondary- and tertiary-treated wastewater collected from five WTPs in three Saudi cities for four to five weeks and (2) test their potential genotoxicity. Three genotoxicological parameters were used: % tail DNA (%T), tail moment (TM) and percentage micronuclei (%MN). Both DBP and DEHP were detected in all treated wastewater samples. DMP, DEP, BBP, DOP, and BPA were found in 83.3, 84.2, 79, 73.7 and 97.4% of the samples, respectively. The levels of DMP (p<0.001), DOP (p<0.001) and BPA (p=0.001) were higher in tertiary- treated wastewater than secondary-treated wastewater, perhaps due to the influence of the molecular weight and polarity of the chemicals. Both weekly sampling frequency and WTP locations significantly affected the variability in our data. Treated wastewater from Wadi Al-Araj was able to induce DNA damage (%T and TM) in human lymphoblastoid TK6 cells that was statistically higher than wastewater from all other WTPs and in untreated TK6 cells (negative control). %MN in samples from both Wadi Al-Araj and Manfouah did not differ statistically but was significantly higher than in the untreated TK6 cells. This study also showed that the samples of tertiary-treated wastewater had a higher genotoxicological potential to induce DNA damage than the samples of secondary-treated wastewater. BPA and some PAEs in the treated wastewater might have the potential to induce genetic damage, despite their low levels. Genotoxicity, however, may also have been due to the presence of other contaminants. Our preliminary findings should be of concern to Saudi agriculture because long-term irrigation with treated wastewater could lead to the accumulation of PAEs and BPA in the soil and ultimately reach the human and animal food chain. WTPs need to remove pollutants more efficiently. Until then, a cautious use of treated wastewater for irrigation is recommended to avoid serious health impacts on local populations.

In vitro and in silico assessment of the structure-dependent binding of bisphenol analogues to glucocorticoid receptor

Widespread use of bisphenol A (BPA) and other bisphenol analogues has attracted increasing attention for their potential adverse effects. As environmental endocrine-disrupting compounds (EDCs), bisphenols (BPs) may activate a variety of nuclear receptors, including glucocorticoid receptor (GR). In this work, the binding of 11 BPs to GR was investigated by fluorescence polarization (FP) assay in combination with molecular dynamics simulations. The human glucocorticoid receptor was prepared as a soluble recombinant protein. A fluorescein-labeled dexamethasone derivative (Dex-fl) was employed as tracer. Competitive displacement of Dex-fl from GR by BPs showed that the binding affinities of bisphenol analogues were largely dependent on their characteristic functional groups. In order to further understand the relationship between BPs structures and their GR-mediated activities, molecular docking was utilized to explore the binding modes at the atomic level. The results confirmed that structural variations of bisphenol analogues contributed to different interactions of BPs with GR, potentially causing distinct toxic effects. Comparison of the calculated binding energies vs. experimental binding affinities yielded a good correlation (R ² = 0.8266), which might be helpful for the design of environmentally benign materials with reduced toxicities. In addition, the established FP assay based on GR exhibited the potential to offer an alternative to traditional methods for the detection of bisphenols.

Colorimetric determination of melamine in milk using unmodified silver nanoparticles

Melamine is nitrogen rich chemical compound used as an adulterant in dairy products by unscrupulous people to increase the apparent protein content. This incident prompted the researchers to develop simple methods for easy detection of melamine in food samples. In the present paper, we report a simple and sensitive colorimetric method for detection of melamine in milk based on silver nanoparticles. This method relies upon the principle that melamine causes the aggregation of silver nanoparticles, resulting in abrupt color change from yellow to red under optimized conditions. The concentration of melamine in adulterated sample can be quantitated by monitoring the absorption spectra of silver nanoparticles using ultraviolet-visible (UV-Vis) spectrometer. The present colorimetric method which utilizes silver nanoparticles of 35 nm can reliably detect melamine down to a concentration of 0.04 mg l(-1).

Determination of free and total phthalates in commercial whole milk products in different packaging materials by gas chromatography-mass spectrometry

We developed a method for extraction and determination of free and total phthalate esters in commercial whole milk products. The free phthalates in milk samples were extracted with ethyl acetate after general pretreatment procedures including protein precipitation, centrifugation, and filtration. The bound phthalates in samples were first desorbed with the aid of ultrasound irradiation before extraction of total phthalates. The separation and determination of phthalates in extracts was performed by gas chromatography coupled with mass spectrometric detection. The detection limits were in the range of 0.09 to 0.36ng/g and the average recovery between 79.1 and 110.3%. The developed methods were applied to extract and determine phthalates in commercial whole milk products with different packaging materials, including plastic, glass, and metal. All samples contained several phthalates, including diethyl, diisobutyl, and bis(2-ethylhexyl) phthalates at concentrations between 2.60 and 156.4ng/g. The identified phthalates occurred in both free and bound forms. The amounts of phthalates in milk samples packaged in glass and metal containers were much lower than those in plastic containers. Plastic packaging materials are a possible source of phthalate contamination in commercial whole milk products, and a considerable portion of bleached phthalates from packaging can be adsorbed on proteins and other solid components of milk.

Reliable quantification of phthalates in environmental matrices (air, water, sludge, sediment and soil): a review

Because of their widespread application, phthalates or phthalic acid esters (PAEs) are ubiquitous in the environment. Their presence has attracted considerable attention due to their potential impacts on ecosystem functioning and on public health, so their quantification has become a necessity. Various extraction procedures as well as gas/liquid chromatography and mass spectrometry detection techniques are found as suitable for reliable detection of such compounds. However, PAEs are ubiquitous in the laboratory environment including ambient air, reagents, sampling equipment, and various analytical devices, that induces difficult analysis of real samples with a low PAE background. Therefore, accurate PAE analysis in environmental matrices is a challenging task. This paper reviews the extensive literature data on the techniques for PAE quantification in natural media. Sampling, sample extraction/pretreatment and detection for quantifying PAEs in different environmental matrices (air, water, sludge, sediment and soil) have been reviewed and compared. The concept of "green analytical chemistry" for PAE determination is also discussed. Moreover useful information about the material preparation and the procedures of quality control and quality assurance are presented to overcome the problem of sample contamination and these encountered due to matrix effects in order to avoid overestimating PAE concentrations in the environment.

The association of socio-demographic status, lifestyle factors and dietary patterns with total urinary phthalates in Australian men

OBJECTIVE

To investigate the associations between socio-demographic status, lifestyle factors, dietary patterns and urinary total phthalate concentration in a cohort of South Australian men.

METHOD

We randomly selected 1527 males aged 39 to 84 from wave two of the Men Androgen Inflammation Lifestyle Environment and Stress (MAILES) study. Total phthalate concentration was examined in fasting morning urine samples. Socio-demographic and lifestyle factors were assessed by questionnaire. Food intake was assessed by food frequency questionnaire (FFQ). Dietary patterns were constructed using factor analysis.

RESULTS

Total phthalates were detected in 99.6% of the urine samples. The overall geometric mean (95% CI) of total phthalate concentration was 112.4 (107.5-117.5) ng/mL. The least square geometric means (LSGMs) of total phthalate concentration were significantly higher among people who were obese (127.8 ng/mL), consuming less than two serves fruit per day (125.7 ng/mL) and drinking more than one can (375mL) of carbonated soft drink per day (131.9 ng/mL). Two dietary patterns were identified: a prudent dietary pattern and a western dietary pattern. Both the western dietary pattern (p = 0.002) and multiple lifestyle risk factors including smoking, obesity, insufficient physical activity and the highest quartile of the western dietary pattern (p<0.001), were positively associated with total phthalate levels. There was no significant relationship between total phthalate concentration and socio-demographic status.

CONCLUSION

Phthalate exposure is ubiquitous and positively associated with lifestyle risk factors in urban dwelling Australian men.

Hydrophilic solid-phase extraction of melamine with ampholine-modified hybrid organic-inorganic silica material

In this work, an ampholine-functionalized hybrid organic-inorganic silica sorbent was successfully used to extract melamine from a milk formula sample by a hydrophilic interaction solid-phase extraction protocol. Primary factors affecting the extraction efficiency of the material such as extraction solvent, elution solvent, sample loading volume, and elution volume have been thoroughly optimized. Under the optimized hydrophilic solid-phase extraction conditions, the recoveries of melamine spiked in milk formula samples ranged from 86.2 to 101.8% with relative standard deviations of 4.1-9.4% (n = 3). The limit of detection (S/N = 3) was 0.32 μg/g. The adsorption capacity toward melamine was 30 μg of melamine per grams of sorbent. Due to its simplicity, rapidity and cost effectiveness, the newly developed hydrophilic solid-phase extraction method should provide a promising tool for daily monitoring of doped melamine in milk formula.

Simultaneous determination of seven phthalic acid esters in beverages using ultrasound and vortex-assisted dispersive liquid-liquid microextraction followed by high-performance liquid chromatography

A sensitive, rapid, and simple high-performance liquid chromatography with UV detection method was developed for the simultaneous determination of seven phthalic acid esters (dimethyl phthalate, dipropyl phthalate, di-n-butyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate, di-(2-ethylhexyl) phthalate, and di-n-octyl phthalate) in several kinds of beverage samples. Ultrasound and vortex-assisted dispersive liquid-liquid microextraction method was used. The separation was performed using an Intersil ODS-3 column (C18 , 250 × 4.6 mm, 5.0 μm) and a gradient elution with a mobile phase consisting of MeOH/ACN (50:50) and 0.2 M KH2 PO4 buffer. Analytes were detected by a UV detector at 230 nm. The developed method was validated in terms of linearity, limit of detection, limit of quantification, repeatability, accuracy, and recovery. Calibration equations and correlation coefficients (> 0.99) were calculated by least squares method with weighting factor. The limit of detection and quantification were in the range of 0.019-0.208 and 0.072-0.483 μg/L. The repeatability and intermediate precision were determined in terms of relative standard deviation to be within 0.03-3.93 and 0.02-4.74%, respectively. The accuracy was found to be in the range of -14.55 to 15.57% in terms of relative error. Seventeen different beverage samples in plastic bottles were successfully analyzed, and ten of them were found to be contaminated by different phthalic acid esters.