Does cholesterol preferentially pack in lipid domains with saturated sphingomyelin over phosphatidylcholine? A comprehensive monolayer study combined with grazing incidence X-ray diffraction and Brewster angle microscopy experiments

Oxidation of lipid membrane cholesterol by cholesterol oxidase and its effects on raft model membrane structure

The effects of a peripheral protein - cholesterol oxidase (3β-hydroxysteroid oxidase, ChOx) on the characteristics of model lipid membranes composed of cholesterol, cholesterol:sphingomyelin (1:1), and the raft model composed of DOPC:Chol:SM (1:1:1) were investigated using two membrane model systems: the flat monolayer prepared by the Langmuir technique and the curved model consisting of liposome of the same lipids. The planar monolayers and liposomes were employed to follow membrane cholesterol oxidation to cholestenone catalyzed by ChOx and changes in the lipid membrane structure accompanying this reaction. Changes in the structure of liposomes in the presence of the enzyme were reflected in the changes of hydrodynamic diameter and fluorescence microscopy images, while changes of surface properties of planar membranes were evaluated by grazing incidence X-ray diffraction (GIXD) and Brewster angle microscopy. UV-Vis absorbance measurements confirmed the activity of the enzyme in the tested systems. A better understanding of the interactions between the enzyme and the cell membrane may help in finding alternative ways to decrease excessive cholesterol levels than the common approach of treating hypercholesterolemia with statins, which are not free from undesirable side effects, repeatedly reported in the literature and observed by the patients.

Study of the correlation between the structure of selected triester of phosphatidylcholine and their impact on physicochemical properties of model mammalian membranes

Cationic lipids are synthetic compounds of amphiphilic character used in Drug Delivery Systems (DDS), especially in gene therapy, as the carriers of genetic material. As it is known, the main limitation of the application of cationic lipids in DDS is their high cytotoxicity after in vivo administration and low bioactivity. This is probably related to not fully known the relationship between the lipid structure and its activity as well as the mechanism of lipofection or drug delivery. Therefore, in this work we determined the impact of a selected group of cationic lipids - triesters of phosphatidylcholine (Et-PCs) - differing in their hydrophobic structure on model mammalian membranes. In the research, as model systems, Langmuir monolayers and liposomes were applied. It was shown that the incorporation of Et-PCs into model mammalian membranes weakens interactions between lipids, causing the increase of fluidity, disordering degree and permeability of membrane. The destabilization of the membrane in this way can facilitate the entry of drugs, carried inside cationic liposomes, into the pathological cell. Moreover, the studies prove that the structure of the hydrophobic part of cationic lipids also affects the properties of lipid membranes.

Statin Action Targets Lipid Rafts of Cell Membranes: GIXD/PM-IRRAS Investigation of Langmuir Monolayers

Lipid rafts are condensed regions of cell membranes rich in cholesterol and sphingomyelin, which constitute the target for anticholesterolemic drugs - statins. In this work, we use for the first time a combined grazing-incidence X-ray diffraction (GIXD)/polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS)/Brewster angle microscopy (BAM) approach to show the statin effect on model lipid rafts and its components assembled in Langmuir monolayers at the air-water interface. Two representatives of these drugs, fluvastatin (FLU) and cerivastatin (CER), of different hydrophobicity were chosen, while cholesterol (Chol) and sphingomyelin (SM), and their 1:1 mixture were selected to form condensed monolayers of lipid rafts. The effect of statins on the single components of lipid rafts indicated that both the hydrophobicity of the drugs and the organization of the layer determined the drug-lipid interaction. For cholesterol monolayers, only the most hydrophobic CER was effectively changing the film structure, while for the less organized sphingomyelin, the biggest effect was observed for FLU. This drug affected both the polar headgroup region as shown by PM-IRRAS results and the 2D crystalline structure of the SM monolayer as evidenced by GIXD. Measurements performed for Chol/SM 1:1 models proved also that the statin effect depends on the presence of Chol-SM complexes. In this case, the less hydrophobic FLU was not able to penetrate the binary layer at all, while exposure to the hydrophobic CER resulted in the phase separation and formation of ordered assemblies. The changes in the membrane properties were visualized by BAM images and GIXD patterns and confirmed by thermodynamic parameters of hysteresis in the Langmuir monolayer compression-decompression experiments.

Persistent organic pollutants in model fungal membranes. Effects on the activity of phospholipases

Soils are the final sink for multiple organic pollutants emitted to the environment. Some of these chemicals which are toxic, recalcitrant and can bioaccumulate in living organism and biomagnify in trophic chains are classified persistent organic pollutants (POP). Vast areas of arable land have been polluted by POPs and the only economically possible means of decontamination is bioremediation, that is the utilization of POP-degrading microbes. Especially useful can be non-ligninolytic fungi, as their fast-growing mycelia can reach POP molecules strongly bond to soil minerals or humus fraction inaccessible to bacteria. The mobilized POP molecules are incorporated into the fungal plasma membrane where their degradation begins. The presence of POP molecules in the membranes can change their physical properties and trigger toxic effects to the cell. To avoid these phenomena fungi can quickly remodel the phospholipid composition of their membrane with employing different phospholipases and acyltransferases. However, if the presence of POP downregulates the phospholipases, toxic effects and the final death of microbial cells are highly probable. In our studies we applied multicomponent Langmuir monolayers with their composition mimicking fungal plasma membranes and studied their interactions with two different microbial phospholipases: phospholipase C (α-toxin) and phospholipase A1 (Lecitase ultra). The model membranes were doped with selected POPs that are frequently found in contaminated soils. It turned out that most of the employed POPs do not downregulate considerably the activity of phospholipases, which is a good prognostics for the application of non-ligninolytic fungi in bioremediation.

Influence of lipophilicity of anthracyclines on the interactions with cholesterol in the model cell membranes - Langmuir monolayer and SEIRAS studies

The interactions of anthracyclines with biological membranes strongly depend on the drug lipophilicity, which might also determine the specific affinity to cholesterol molecules. Therefore, in this work we show the studies concerning the effect of two selected anthracyclines, daunorubicin (DNR) and idarubicin (IDA) on simple models of healthy (DMPC:Chol 7:3) and cancer cells membranes with increased level of cholesterol (DMPC:Chol 3:7) as well as pure cholesterol monolayers prepared at the air-water interface and supported on gold surface. It has been shown that more lipophilic IDA is able to penetrate cholesterol monolayers more effectively than DNR due to the formation of IDA-cholesterol arrangements at the interface, as proved by the thermodynamic analysis of compression-expansion cycles. The increased interactions of IDA were also confirmed by the time measurements of pre-compressed monolayers exposed to drug solutions as well as grazing incidence X-ray diffraction studies demonstrating differences in the 2D organization of cholesterol monolayers. Langmuir studies of mixed DMPC:Chol membranes revealed the reorganization of molecules in the cancer cell models at the air-water interface at higher surface pressures due to the removal of DNR, while increased affinity of IDA towards cholesterol allowed this drug to penetrate the layer more efficiently without its removal. The SEIRAS spectra obtained for supported DMPC:Chol bilayers proved that IDA locates both in the ester group and in the acyl chain region of the bilayer, while DNR does not penetrate the membranes as deeply as IDA. The increased penetration of the mixed phospholipid layers by idarubicin might be attributed to the higher lipophilicity caused by the lack of methoxy group and resulting in a specific affinity towards cholesterol.

Interactions of fungal phospholipase Lecitase ultra with phospholipid Langmuir monolayers - Search for substrate specificity and structural factors affecting the activity of the enzyme

Inoculation of selected microbial species into the soils is one of the most effective means of bioremediation of soils polluted by persistent organic pollutants as well as of biocontrol of plant pests. However, this procedure turns out frequently to be ineffective due to the membrane-destructive enzymes secreted to the soil by the autochthonous microorganisms. Especial role play here phospholipases and among them phospholipase A1 (PLA1), Therefore, to explain the interactions of microbial membranes and PLA1 at molecular level and to find the correlation between the composition of the membrane and its resistance to PLA1 action we applied phospholipid Langmuir monolayers as model microbial membranes. As a representative soil extracellular PLA1 we applied Lecitase ultra which is a commercially available hybrid enzyme of PLA1 activity. With the application of specific sn1-ether-sn2-ester phospholipids we proved that Lecitase ultra has solely PLA1 activity; thus, can be applied as an effective model of soil PLA1s. Our studies proved that this enzyme has vast substrate specificity and can hydrolyze structural phospholipids regardless the structure of their polar headgroup. It turned out that the hydrolysis rate was controlled by the condensation of the model membranes. These built of the phospholipids with long saturated fatty acid chains were especially resistant to the action of this enzyme, whereas these formed by the 1-saturated-2-unsaturated-sn-glycero-3-phospholipids were readily degraded. Regarding the polar headgroup we proposed the following row of substrate preference of Lecitase ultra: phosphatidylglycerols > phosphatidylcholines > phosphatidylethanolamines > cardiolipins.

Drug-loading capacity of polylactide-based micro- and nanoparticles - Experimental and molecular modeling study

Micro- and nanostructures prepared from biodegradable homopolymers and amphiphilic block copolymers (AmBCs) have found application as drug-delivery systems (DDSs). The ability to accumulate a drug is a very important parameter characterizing a given DDS. This work focuses on the impact of DDS size, the packing of polymer chains in the DDS, and drug - polymer matrix compatibility on the hydrophobic drug - loading capacity (DLC) of nano/microcarriers prepared from a biodegradable polymer or its copolymer. Using experimental measurements in combination with atomistic molecular dynamics simulations, an analysis of curcumin encapsulation in microspheres (MSs) from polylactide (PLA) homopolymer and nanoparticles (NPs) from PLA-block-poly(2-methacryloyloxyethylphosphorylcholine) AmBC was performed. The results show that curcumin has good affinity for the PLA matrix due to its hydrophobic nature. However, the DLC value is limited by the fact that curcumin only accumulates in the peripheral part of these structures. Such uneven drug distribution in the PLA matrix results from the non-homogeneous density of MSs (non-uniform packing of the polymer chains in the coil). The results also indicate that the MSs can retain a greater amount of hydrophobic drug compared to the NPs, which is associated with the formation of drug aggregates inside the PLA microparticles.

The role of exosome lipids in central nervous system diseases

Central nervous system (CNS) diseases are common diseases that threaten human health. The CNS is highly enriched in lipids, which play important roles in maintaining normal physiological functions of the nervous system. Moreover, many CNS diseases are closely associated with abnormal lipid metabolism. Exosomes are a subtype of extracellular vesicles (EVs) secreted from multivesicular bodies (MVBs) . Through novel forms of intercellular communication, exosomes secreted by brain cells can mediate inter-neuronal signaling and play important roles in the pathogenesis of CNS diseases. Lipids are essential components of exosomes, with cholesterol and sphingolipid as representative constituents of its bilayer membrane. In the CNS, lipids are closely related to the formation and function of exosomes. Their dysregulation causes abnormalities in exosomes, which may, in turn, lead to dysfunctions in inter-neuronal communication and promote diseases. Therefore, the role of lipids in the treatment of neurological diseases through exosomes has received increasing attention. The aim of this review is to discuss the relationship between lipids and exosomes and their roles in CNS diseases.

Interactions of anticancer drugs doxorubicin and idarubicin with lipid monolayers: New insight into the composition, structure and morphology

We quantify directly here for the first time the extents of interactions of two different anthracycline drugs with pure and mixed lipid monolayers with respect to the surface pressure and elucidate differences in the resulting interaction mechanisms. The work concerns interactions of doxorubicin (DOx) and idarubicin (IDA) with monolayers of the zwitterionic DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) and negatively charged DMPS (1,2-dimyristoyl-sn-glycero-3-phospho-L-serine (sodium salt)) as well as a 7:3 mixture of the two lipids. These drugs are used in current cancer treatments, while the lipid systems were chosen as phosphocholines are the major lipid component of healthy cell membranes, and phosphoserines are the major lipid component that is externalized into the outer leaflet of cancerous cell membranes. It is shown that DOx interacts with DMPS monolayers to a greater extent than with DMPC monolayers by lower limits of a factor of 5 at a surface pressure of 10 mN/m and a factor of 12 at 30 mN/m. With increasing surface pressure, the small amount of drug (~0.3 µmol/m²) bound to DMPC monolayers is excluded from the interface, yet its interaction with DMPS monolayers is enhanced until there is even more drug (~3.2 µmol/m²) than lipid (~2.6 µmol/m²) at the interface. Direct evidence is presented for all systems studied that upon surface area compression lipid is reproducibly expelled from the monolayer, which we infer to be in the form of drug-lipid aggregates, yet the nature of adsorption of material back to the monolayer upon expansion is system-dependent. At 30 mN/m, most relevant to human physiology, the interactions of DOx and IDA are starkly different. For DOx, there is a conformational change in the interfacial layer driven by aggregation, resulting in the formation of lateral domains that have extended layers of drug. For the more lipophilic IDA, there is penetration of the drug into the hydrophobic acyl chain region of the monolayer and no indication of lateral segregation. In addition to the Langmuir technique, these advances were made as a result of direct measurements of the interfacial composition, structure and morphology using two different implementations of neutron reflectometry and Brewster angle microscopy. The results provide new insight into key processes that determine the uptake of drugs such as limited drug penetration through cell membranes by passive diffusion as well as activation of drug removal mechanisms related to multidrug resistance.

Perfluorohexyloctane (F6H8) as a delivery agent for cyclosporine A in dry eye syndrome therapy - Langmuir monolayer study complemented with infrared nanospectroscopy

One of the key challenges in dry eye syndrome therapy is to find a suitable carrier for immunosuppressant drug - cyclosporine A (CsA) - delivery to the eye. To investigate this issue, herein we present a methodology based on the combined analysis in macro- (Langmuir monolayers), micro- (Brewster angle microscopy) and nanoscale (atomic force microscopy and infrared nano-spectroscopy). The applied approach proves that CsA affects the phospholipid part of the tear film lipid layer by loosening molecular packing. This effect can be reversed by the addition of perfluorohexyloctane (F₆H₈). We have highlighted that F₆H₈ increases the availability of CsA and therefore is appropriate carrier for CsA topical delivery to the eye in the dry eye syndrome. In addition, the applied herein procedure provides a simple, low-cost laboratory tool for preliminary studies involving membrane active pharmaceuticals, preceding in vivo tests.

Condensation of Model Lipid Films by Cholesterol: Specific Ion Effects

The condensing effect and the ability of cholesterol (CHOL) to induce ordering in lipid films is a question of relevance in biological membranes such as the milk fat globule membrane (MFGM) in which the amount of CHOL influences the phase separation and mechanical resistance to rupture of coexisting phases relevant to emulsified food systems. Here, we study the effect of different salts (NaCl, CaCl2, MgCl2, LaCl3) on monolayers made of a model mixture of lipids (DPPC:DPPS 4:1) and CHOL. To this end, we apply Langmuir Film Balance to report a combined analysis of surface pressure-area (π-A) and surface potential-area (ΔV–A) isotherms along with Micro-Brewster Angle Microscopy (Micro-BAM) images of the monolayers in the presence of the different electrolytes. We show that the condensation of lipid by CHOL depends strongly on the nature of the ions by altering the shape and features of the π-A isotherms. ΔV–A isotherms provide further detail on the ion specific interactions with CHOL. Our results show that the condensation of lipids in the presence of CHOL depends on the combined action of ions and CHOL, which can alter the physical state of the monolayer.

The influence of terpinen-4-ol and eucalyptol - The essential oil components - on fungi and plant sterol monolayers

Antifungal and herbicidal activity of terpenes, being the components of the essential oils, is directly related to the incorporation of these compounds into cellular membranes. Thus, the differences in the lipid composition of various pathogenic membranes may be the factor determining the activity of these molecules. One of the class of lipids, which form the membrane environment are sterols. The aim of this work was to compare the effect of two terpenes: terpinen-4-ol and eucalyptol on the monolayers formed by ergosterol and β - sitosterol, which are the components of fungi and plant membranes, respectively. The modifications in the sterol monolayer properties were investigated in the surface pressure-area measurements and penetration studies as well as in a micrometer scale (Brewster angle microscopy experiments) and in nanoscale (GIXD technique). It was evidenced that although at higher surface pressure the terpene molecules are in part removed from the interface, they are able to substantially modify the condensation, morphology and molecular organization of the sterol film. It was also found that the incorporation of terpenes into sterol films is comparable for both sterols, however, β - sitosterol monolayers properties are affected more strongly than ergosterol films. Finally, the analysis of the results of the studies performed on model membrane systems and the results of antimicrobial studies reported in literature, enabled us to suggest that the activity of terpenes depends on the membrane composition and that the sterol concentration may be important from the point of view of antifungal effect of terpinen-4-ol and eucalyptol.

Molecular Insight into Drug-Loading Capacity of PEG-PLGA Nanoparticles for Itraconazole

Nanoparticles made of amphiphilic block copolymers comprising biodegradable core-forming blocks are very attractive for the preparation of drug-delivery systems with sustained release. Their therapeutic applications are, however, hindered by low values of the drug-loading content (DLC). The compatibility between the drug and the core-forming block of the copolymer is considered the most important factor affecting the DLC value. However, the molecular picture of the hydrophobic drug-copolymer interaction is still not fully recognized. Herein, we examined this complex issue using a range of experimental techniques in combination with atomistic molecular dynamics simulations. We performed an analysis of the interaction between itraconazole, a model hydrophobic drug, and a poly(ethylene glycol)-poly(lactide- co-glycolide) (PEG-PLGA) copolymer, a biodegradable copolymer commonly used for the preparation of drug-delivery systems. Our results clearly show that the limited capacity of the PEG-PLGA nanoparticles for the accumulation of hydrophobic drugs is due to the fact that the drug molecules are located only at the water-polymer interface, whereas the interior of the PLGA core remains empty. These findings can be useful in the rational design and development of amphiphilic copolymer-based drug-delivery systems.

Applications of Brewster angle microscopy from biological materials to biological systems

Brewster angle microscopy (BAM) is a powerful technique that allows for real-time visualization of Langmuir monolayers. The lateral organization of these films can be investigated, including phase separation and the formation of domains, which may be of different sizes and shapes depending on the properties of the monolayer. Different molecules or small changes within a molecule such as the molecule's length or presence of a double bond can alter the monolayer's lateral organization that is usually undetected using surface pressure-area isotherms. The effect of such changes can be clearly observed using BAM in real-time, under full hydration, which is an experimental advantage in many cases. While previous BAM reviews focused more on selected compounds or compared the impact of structural variations on the lateral domain formation, this review provided a broader overview of BAM application using biological materials and systems including the visualization of amphiphilic molecules, proteins, drugs, extracts, DNA, and nanoparticles at the air-water interface.

How to gather useful and valuable information from protein binding measurements using Langmuir lipid monolayers

This review presents data on the influence of various experimental parameters on the binding of proteins onto Langmuir lipid monolayers. The users of the Langmuir methodology are often unaware of the importance of choosing appropriate experimental conditions to validate the data acquired with this method. The protein Retinitis pigmentosa 2 (RP2) has been used throughout this review to illustrate the influence of these experimental parameters on the data gathered with Langmuir monolayers. The methods detailed in this review include the determination of protein binding parameters from the measurement of adsorption isotherms, infrared spectra of the protein in solution and in monolayers, ellipsometric isotherms and fluorescence micrographs.

Properties of Langmuir and solid supported lipid films with sphingomyelin

Biological cell membranes play a crucial role in various biological processes and their functionality to some extent is determined by the hydrophilic/hydrophobic balance. A significant progress in understanding the membrane structure was the discovery of laterally segregated lipid domains, called the lipid rafts. These raft domains are of ordered lamellar liquid-crystalline phase, while rest of the membrane exists in a relatively disordered lamellar liquid-crystalline phase. Moreover, the chemical constitution of the lipid rafts consists of a higher content (up to 50%) of cholesterol (Chol) and sphingomyelin (SM). Sphingomyelin also plays a significant role in the red cells of blood and nerves, in some diseases, as a precursor to ceramides, and other sphingolipid metabolites. In this paper properties of Langmuir and solid supported mixed lipid films of DPPC/SM, DOPC/SM, and Chol/SM are described. Special attention has been paid to wetting properties (hydrophobic/hydrophilic balance) of these films transferred onto a hydrophilic glass surface. To our knowledge such results have not yet been published in the literature. The properties were determined via contact angle measurements and then calculation of the films' apparent surface free energy. The films' wettability and their apparent surface free energy strongly depend on their composition. The energy is affected by both the structure of hydrocarbon chains of glycerophospholipids (DPPC and DOPC) and their interactions with SM. Properties of mixed Chol/SM monolayer depend also on the film stoichiometry. At a low Chol content (XChol=0.25) the interactions between SM and Chol are strong and hence the formation of binary complex is possible. This is accompanied by a decrease in the film surface free energy in comparison to that of pure SM monolayer, contrary to a higher Chol content where the monolayer energy increases. This suggests that cholesterol is excluded from the membrane thus increasing the film hydrophilicity. These results are consistent with the literature data and somehow confirm the hypothesis of lipid raft formation. The roughness of the investigated monolayer surfaces was also determined using optical profilometry. The roughness parameters of the DPPC, SM, and mixed DPPC/SM generally correlate with the changes of their apparent surface free energy, i.e. with the decreasing roughness the apparent surface free energy also decreases. However, this is not the case for mixed DOPC/SM monolayers. Although the roughness increases with SM content the apparent surface free energy decreases. Therefore some other factors, like the presence of unsaturated bonds in the DOPC molecule, influence the film phase state and the energy too. More experiments are needed to explain this hypothesis.