Investigation on the relationship between lipid composition and structure in model membranes composed of extracted natural phospholipids

HYPOTHESIS

Unravelling the structural diversity of cellular membranes is a paramount challenge in life sciences. In particular, lipid composition affects the membrane collective behaviour, and its interactions with other biological molecules.

EXPERIMENTS

Here, the relationship between membrane composition and resultant structural features was investigated by surface pressure-area isotherms, Brewster angle microscopy and neutron reflectometry on in vitro membrane models of the mammalian plasma and endoplasmic-reticulum-Golgi intermediate compartment membranes in the form of Langmuir monolayers. Natural extracted yeast lipids were used because, unlike synthetic lipids, the acyl chain saturation pattern of yeast and mammalian lipids are similar.

FINDINGS

The structure of the model membranes, orthogonal to the plane of the membrane, as well as their lateral packing, were found to depend strongly on their specific composition, with cholesterol having a major influence on the in-plane morphology, yielding a coexistence of liquid-order and liquid-disorder phases.

A biophysical study of tear film lipid layer model membranes

The tear film lipid layer (TFLL), the final layer of the human tear film is responsible for surface tension reduction while blinking, water evaporation retardation and maintaining the stability of the tear film. The study of the composition-structure-function relationship of TFLL is paramount, as a compromised structure of TFLL leads to the emergence of dry eye disease (DED) which is one the most prevalent ophthalmic surface diseases of the modern world, associated with chronic pain and reduced visual capability. In this model membrane study, a systematic approach is used to study the biophysical properties of TFLL model membranes as a function of composition. Three mixed-lipid model membranes are studied along with their individual components comprising cholesteryl oleate (CO), glyceryl trioleate (GT), L-α-phosphatidylcholine (egg PC) and a free fatty acid mixture. The models become progressively more complex from binary to quaternary mixtures, allowing the role of each individual lipid to be derived. Langmuir balance, Brewster Angle Microscopy (BAM) and Profile Analysis Tensiometer (PAT) are used to study the surface activity and compression-expansion cycles, morphology, and rheological behaviour of the model membranes, respectively. Evidence of multilayering is observed with inclusion of CO and a reversible collapse is associated with the GT phase transition. An initially more coherent film is observed due to the addition of polar PC. Notably, these individual behaviours are retained in the mixed films and suggest a possible role for each physiological component of TFLL.

Cholesterol enhances the negative impact of vaping additives on lung surfactant model systems

Aims: Vaping has given rise to e-cigarette or vaping product use-associated lung injury. Model lung surfactant films were used to assess the impact of vape additives (vitamin E, vitamin E acetate, tetrahydrocannabinol, cannabidiol). This work builds upon our previous findings, by incorporating cholesterol, to understand the interplay between the additives and the sterol in surfactant function. Materials & methods: Compression-expansion cycles of lipid monofilm at the air-water interface and Brewster angle microscopy allowed elucidating the effects of vape additives. Results & conclusion: Vape additives at 5 mol% inhibited proper lipid packing and reduced film stability. Cholesterol enhanced the additive effects, resulting in significantly destabilized films and altered domains. The observed impact could signify dysfunctional lung surfactant and impaired lung function.

Impact of Pollutant Ozone on the Biophysical Properties of Tear Film Lipid Layer Model Membranes

Ozone exposure from environmental smog has been implicated as a risk factor for developing dry eye disease (DED). The tear film lipid layer (TFLL), which is the outermost layer of the tear film and responsible for surface tension reduction while blinking, is in direct contact with the environment and serves as the first line of defense against external aggressors such as environmental pollution. The impact of exposure to ozone on the biophysical properties of three TFLL model membranes was investigated. These model membranes include a binary mixture of cholesteryl oleate (CO) and L-α-phosphatidylcholine (egg PC), a ternary mixture of CO, glyceryl trioleate (GT) and PC, as well as a quaternary mixture of CO, GT, a mixture of free fatty acids palmitic acid and stearic acid (FFAs) and PC. Biophysical impacts were evaluated as changes to the surface activity, respreadability, morphology and viscoelastic properties of the films. Expansion to higher molecular areas was observed in all the TFLL model membrane films which is attributable to the accommodation of the cleaved chains in the film. Significant morphological changes were observed, namely fluidization and the disruption of the phase transition behaviour of GT, and multilayer formation of CO. This fluidization reduces the hysteresis loops for the model membranes. On the other hand, the viscoelastic properties of the films exhibited differential impacts from ozone exposure as a function of composition. These findings are correlated to chemical changes to the lipids determined using ESI-MS.

Unravelling the orientation of the inositol-biphosphate ring and its dependence on phosphatidylinositol 4,5-bisphosphate cluster formation in model membranes

HYPOTHESIS

Inositol phospholipids are well known to form clusters in the cytoplasmic leaflet of the plasma membrane that are responsible for the interaction and recruitment of proteins involved in key biological processes like endocytosis, ion channel activation and secondary messenger production. Although their phosphorylated inositol ring headgroup plays an important role in protein binding, its orientation with respect to the plane of the membrane and its lateral packing density has not been previously described experimentally.

EXPERIMENTS

Here, we study phosphatidylinositol 4,5-bisphosphate (PIP2) planar model membranes in the form of Langmuir monolayers by surface pressure-area isotherms, Brewster angle microscopy and neutron reflectometry to elucidate the relation between lateral (in-plane) and perpendicular (out-of-plane) molecular organization of PIP2.

FINDINGS

Different surface areas were explored through monolayer compression, allowing us to correlate the formation of transient PIP2 clusters with the change in orientation of the inositol-biphosphate headgroup, which was experimentally determined by neutron reflectometry.

Persistent organic pollutants in model fungal membranes. Effects on the activity of phospholipases

Soils are the final sink for multiple organic pollutants emitted to the environment. Some of these chemicals which are toxic, recalcitrant and can bioaccumulate in living organism and biomagnify in trophic chains are classified persistent organic pollutants (POP). Vast areas of arable land have been polluted by POPs and the only economically possible means of decontamination is bioremediation, that is the utilization of POP-degrading microbes. Especially useful can be non-ligninolytic fungi, as their fast-growing mycelia can reach POP molecules strongly bond to soil minerals or humus fraction inaccessible to bacteria. The mobilized POP molecules are incorporated into the fungal plasma membrane where their degradation begins. The presence of POP molecules in the membranes can change their physical properties and trigger toxic effects to the cell. To avoid these phenomena fungi can quickly remodel the phospholipid composition of their membrane with employing different phospholipases and acyltransferases. However, if the presence of POP downregulates the phospholipases, toxic effects and the final death of microbial cells are highly probable. In our studies we applied multicomponent Langmuir monolayers with their composition mimicking fungal plasma membranes and studied their interactions with two different microbial phospholipases: phospholipase C (α-toxin) and phospholipase A1 (Lecitase ultra). The model membranes were doped with selected POPs that are frequently found in contaminated soils. It turned out that most of the employed POPs do not downregulate considerably the activity of phospholipases, which is a good prognostics for the application of non-ligninolytic fungi in bioremediation.

Incorporation of dehydrodieugenol, a neolignan isolated from Nectandra leucantha (Lauraceae), in lipid Langmuir monolayers as biomembrane models

Dehydrodieugenol, a neolignan isolated from the Brazilian plant Nectandra leucantha (Lauraceae) with reported antiprotozoal and anticancer activity, was incorporated in Langmuir monolayers of selected lipids as cell membrane models, aiming to comprehend its action mechanism at the molecular level. The interaction of this compound with the lipids dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylethanolamine (DPPE), dipalmitoylphosphatidylserine (DPPS), and dipalmitoylphosphatidylglycerol (DPPG) was inferred through tensiometry, infrared spectroscopy, and Brewster angle microscopy. The interactions had different effects depending on the chemical nature of the lipid polar head, with expansion for DPPC monolayers, condensation for DPPE, and expansion (at low surface pressures) followed by the overlap of the isotherms (at high surface pressure values) for DPPS and DPPG. Effects caused by dehydrodieugenol in the negatively charged lipids were distinctive, which was also reflected in the hysteresis assays, surface potential-area isotherms, and rheological measurements. Infrared spectroscopy indicated that the drug interaction with the monolayer affects not only the polar groups, but also the acyl lipid chains for all lipids. These results pointed to the fact that the interaction of the drug with lipid monolayers at the air-water interface is modulated by the lipid composition, mainly considering the polar head of the lipids, as well as the hydrophobicity of the lipids and the drug. As negatively charged lipids pointed to distinctive interaction, we believe this can be related to the antiprotozoal and anticancer properties of the compound.

The effect of chitosan/TiO2/hyaluronic acid subphase on the behaviour of 1,2-dioleoyl-sn-glycero-3-phosphocholine membrane

The main aim of the study was to determine the effect of two polysaccharides: chitosan (Ch) and hyaluronic acid (HA), and/or titanium dioxide (TiO₂) on the structure and behaviour of the 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) membrane. To achieve this goal the surface pressure as a function of the area per molecule (π-A) isotherm for the phospholipid monolayer was recorded. The shape of the π-A isotherms and compression-decompression cycles, as well as the compression modulus values, were analysed in terms of biocompatibility. Besides, morphology and thickness of the phospholipid layers obtained by means of Brewster angle microscope at different π, were determined. The obtained results show that both polysaccharides Ch, HA, as well inorganic TiO₂ affect slightly the structure of the DOPC monolayer but do not disrupt it. Their presence brings no typical arrangements of both the polar heads and tails of DOPC molecules at the interface.

Membrane composition and successful bioaugmentation. Studies of the interactions of model thylakoid and plasma cyanobacterial and bacterial membranes with fungal membrane-lytic enzyme Lecitase ultra

Cyanobacterial/bacterial consortia are frequently inoculated to soils to increase the soil fertility and to accelerate the biodegradation of organic pollutants. Moreover, such consortia can also be successfully applied in landfills especially for the biodegradation of plastic wastes. However, the bioaugmentation techniques turn out frequently inefficient due to the competition of the indigenous microorganisms attacking directly these inoculated or secreting to their surroundings cell wall and membrane-lytic enzymes. It can be hypothesized that the resistance of the microbial membrane to the enzymatic degradation is correlated with its lipid composition. To verify this hypothesis glycolipid and phospholipid Langmuir monolayers were applied as models of thylakoid and plasma cyanobacterial and bacterial membranes. Hybrid fungal enzyme Lecitase ultra joining the activity of lipase and phospholipase A1 was applied as the model of fungal membrane-lytic enzyme. It turned out that anionic thylakoid lipids sulfoquinovosyldiacylglycerol and phosphatidylglycerols were the main targets of Lecitase ultra in the model multicomponent thylakoid membranes. The resistance of the model plasma bacterial membranes to enzymatic degradation depended significantly to their composition. The resistance increased generally when the unsaturated lipids were exchanged to their saturated counterparts. However, most resistant turned out the membranes composed of unsaturated phosphatidylamine and saturated anionic phospholipids.

Surface mechanical behavior of water-spread poly(styrene)-poly(ethylene glycol) (PS-PEG) micelles at the air-water interface: Effect of micelle size and polymer end/linking group chemistry

HYPOTHESIS

The surface mechanical properties of poly(styrene)-poly(ethylene glycol) (PS-PEG) micelles are influenced by the PEG corona structure. Changes in micelle aggregation number as well as changes in the PEG end group and linking group chemistry of the PS-PEG block copolymer are expected to alter PEG corona characteristics and therefore affect surface mechanical properties of the resulting micelle film.

EXPERIMENTS

Different sized micelles comprised of PS-PEG block copolymer chains were formulated by equilibrating micelles in different ratios of acetone/water mixtures and subsequently removing acetone using dialysis. Additionally, micelles of a similar size and PS-PEG molecular weight but slightly different chemistry were formulated. The micelles were characterized using dynamic light scattering (DLS), transmission electron microscopy (TEM), ¹H NMR, surface pressure-area isotherms and Brewster angle microscopy (BAM).

FINDINGS

The reduction in micelle aggregation number results in the subsequent monolayer having higher compressibility moduli and bending stiffnesses and collapsing at lower surface pressures. Micelle hydrophobicity was shown to improve readsorption of micelles to interface after collapse. Analysis of Brewster angle microscopy images of out-of-plane wrinkle structures which formed upon monolayer collapse indicates the presence of continuous 1 nm thick PEG layer which allows micelle monolayers to bend under high compression.

What can we learn about amphiphile-membrane interaction from model lipid membranes?

Surface-active amphiphiles find applications in a wide range of areas of industry such as agrochemicals, personal care, and pharmaceuticals. In many of these applications, interaction with cell membranes is a key factor for achieving their purpose. How do amphiphiles interact with lipid membranes? What are their bases for membrane specificity? Which biophysical properties of membranes are susceptible to modulation by amphiphilic membrane-effectors? What aspects of this interaction are important for performing their function? In our work on membrane biophysics over the years, questions like these have arisen and we now share some of our findings and discuss them in this review. This topic was approached focusing on the membrane properties and their alterations rather than on the amphiphile structure requirements for their interaction. Here, we do not aim to provide a comprehensive list of the modes of action of amphiphiles of biological interest but to help in understanding them.

The Influence of Polysaccharides/TiO2 on the Model Membranes of Dipalmitoylphosphatidylglycerol and Bacterial Lipids

The aim of the study was to determine the bactericidal properties of popular medical, pharmaceutical, and cosmetic ingredients, namely chitosan (Ch), hyaluronic acid (HA), and titanium dioxide (TiO₂). The characteristics presented in this paper are based on the Langmuir monolayer studies of the model biological membranes formed on subphases with these compounds or their mixtures. To prepare the Langmuir film, 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DPPG) phospholipid, which is the component of most bacterial membranes, as well as biological material-lipids isolated from bacteria Escherichia coli and Staphylococcus aureus were used. The analysis of the surface pressure-mean molecular area (π-A) isotherms, compression modulus as a function of surface pressure, C_S^-1 = f(π), relative surface pressure as a function of time, π/π₀ = f(t), hysteresis loops, as well as structure visualized using a Brewster angle microscope (BAM) shows clearly that Ch, HA, and TiO₂ have antibacterial properties. Ch and TiO₂ mostly affect S. aureus monolayer structure during compression. They can enhance the permeability of biological membranes leading to the bacteria cell death. In turn, HA has a greater impact on the thickness of E. coli film.

Compression-induced Phase Transition in Adsorbed Monolayers of Alkylgalactosides at the Air/Water Interface

Compression-induced formation of condensed-phase domains in adsorbed monolayers of alkylgalactosides (AGs) at the air/water interface was observed. When an aqueous solution of AGs was poured into a Langmuir trough, the AG molecules were spontaneously adsorbed from the solution at the air/water interface to form the adsorbed or Gibbs monolayer in an expanded, liquid-like phase at equilibrium. The monolayer was subsequently laterally compressed by the barriers of the trough, while simultaneously observing the system using a Brewster angle microscope (BAM). The surface pressure-film area isotherm upon compression showed a kink at a surface pressure (π_kink) comparable to or several mN・m^-1 higher than the surface pressure at the critical micelle concentration (π_CMC), followed by a plateau region. BAM observations revealed that condensed-phase domains were formed in the homogeneous expanded phase at the plateau. Hence, the plateau corresponds to a first-order phase transition from the expanded phase to the condensed phase. As expected, the compressed adsorbed monolayer was in a metastable state because the surface pressure decreased with time, and the condensed-phase domains disappeared when compression was discontinued. The transient formation of a quasi-stable condensed phase may originate from the combined effect of the lower solubility of AG molecules in water, moderately strong attractive intermolecular interactions between AG molecules at the air/water interface, and high-rate compression.

Interactions of fungal phospholipase Lecitase ultra with phospholipid Langmuir monolayers - Search for substrate specificity and structural factors affecting the activity of the enzyme

Inoculation of selected microbial species into the soils is one of the most effective means of bioremediation of soils polluted by persistent organic pollutants as well as of biocontrol of plant pests. However, this procedure turns out frequently to be ineffective due to the membrane-destructive enzymes secreted to the soil by the autochthonous microorganisms. Especial role play here phospholipases and among them phospholipase A1 (PLA1), Therefore, to explain the interactions of microbial membranes and PLA1 at molecular level and to find the correlation between the composition of the membrane and its resistance to PLA1 action we applied phospholipid Langmuir monolayers as model microbial membranes. As a representative soil extracellular PLA1 we applied Lecitase ultra which is a commercially available hybrid enzyme of PLA1 activity. With the application of specific sn1-ether-sn2-ester phospholipids we proved that Lecitase ultra has solely PLA1 activity; thus, can be applied as an effective model of soil PLA1s. Our studies proved that this enzyme has vast substrate specificity and can hydrolyze structural phospholipids regardless the structure of their polar headgroup. It turned out that the hydrolysis rate was controlled by the condensation of the model membranes. These built of the phospholipids with long saturated fatty acid chains were especially resistant to the action of this enzyme, whereas these formed by the 1-saturated-2-unsaturated-sn-glycero-3-phospholipids were readily degraded. Regarding the polar headgroup we proposed the following row of substrate preference of Lecitase ultra: phosphatidylglycerols > phosphatidylcholines > phosphatidylethanolamines > cardiolipins.

Interactions between Phosphatidylcholine and Kaempferol or Myristicin: Langmuir Monolayers and Microelectrophoretic Studies

Flavonoid compounds are known for their antibacterial, anti-inflammatory, and anticancer properties. Therefore, they can influence membrane properties that interest us, modifying both their structure and functions. We used kaempferol (K) and myricetin (M) as representatives of this group. We investigated the influence of the abovementioned compounds on model cell membranes' properties (i.e., Langmuir monolayers and liposomes). The basic research methods used in these studies were the Langmuir method with Brewster angle microscopy and microelectrophoresis. The π-A isotherms were registered for the pure components and mixtures of these compounds with phosphatidylcholine (PC) in appropriate volume ratios. Using mathematical equations, we established that kaempferol, myricetin, and the lipids formed complexes at 1:1 ratios. We derived the parameters characterizing the formed complexes, i.e., the surfaces occupied by the complexes and the stability constants of the formed complexes. Using the microelectrophoretic method, we determined the dependence of the lipid membranes' surface charge density as a function of the pH (in the range of 2 to 10) of the electrolyte solution. The presented results indicate that the PC membrane's modification with kaempferol or myricetin affected changes in the surface charge density and isoelectric point values.

Simultaneous action of microbial phospholipase C and lipase on model bacterial membranes - Modeling the processes crucial for bioaugmentation

Bioaugmentation is a promising method of the remediation of soils polluted by persistent organic pollutants (POP). Unfortunately, it happens frequently that the microorganisms inoculated into the soil die out due to the presence of enzymes secreted by autochthonous microorganisms. Especially destructive are here phospholipases C (PLC) and lipases which destruct the microorganism's cellular membrane. The composition of bacterial membranes differs between species, so it is highly possible that depending on the membrane constitution some bacteria are more resistant to PLCs and lipases than other. To shed light on these problems we applied phospholipid Langmuir monolayers as model microbial membranes and studied their interactions with α-toxin (model bacterial PLC) and the lipase isolated from soil fungus Candida rugosa. Membrane phospholipids differing in their headgroup (phosphatidylcholines, phosphatidylethanolamines, phosphatidylglycerols and cardiolipins) and in their tail structure were applied. The monolayers were characterized by the Langmuir technique, visualized by Brewster angle microscopy, and the packing mode of the phospholipid molecules was verified by the application of the diffraction of synchrotron radiation. We also studied the mutual miscibility of diacylglycerols and the native phospholipids as their interaction is crucial for the understanding of the PLC and lipase activity. It turned out that all the investigated phospholipid classes can be hydrolyzed by PLC; however, they differ profoundly in the hydrolysis degree. Depending on the effects of the initial PLC action and the mutual organization of the diacylglycerol and phospholipid molecules the lipase can ruin the model membranes or can be completely neutral to them.

On the role of surrounding regions in the fusion peptide in dengue virus infection

Dengue virus infection depends on its fusion with the host membrane, where the binding occurs through interaction between proteins on the virus cell surface and specific viral receptors on target membranes. This process is mediated by the fusion peptide located between residues 98 and 112 (DRGWGNGCGLFGKGG) that forms a loop in domain II of dengue E glycoprotein. In this study, we evaluated the role of fusion peptide surrounding regions (88-97 and 113-123) of the Dengue 2 subtype on its interaction with the membrane and fusion activity. These sequences are important to stabilize the fusion peptide loop and increase fusion activity. Three peptides, besides the fusion peptide, were synthesized by SPPS using the Fmoc chemical approach. The first contains the fusion peptide and the C-terminal region of the loop (sequence 98-123); another contains the N-terminal region (88-112) and the larger peptide contains both regions (88-123). The peptides were able to interact with a model membrane. Differences in morphology of the monolayer promoted by the peptides were assessed by Brewster Angle Microscopy (BAM). Our data indicated that the C-terminal region of fusion peptide loop is more efficient in promoting fusion and interacting with the membrane than the N-terminal sequence, which is responsible for the electrostatic initial interaction. We propose a 2-step mechanism for the interaction of the dengue virus fusion peptide with the host membrane, where the N-terminal sequence docks electrostatically on the headgroups and then the C-terminal interacts via hydrophobic forces in the acyl chains.

Interactions of l-arginine with Langmuir monolayers of common phospholipids at the air-water interface

The interactions of l-arginine (l-arg) with Langmuir monolayers of three most common phospholipids, which are sodium salt of dipalmitoylphosphatidylglycerol (DPPG), dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine (DPPE), have been investigated at the air-water interface. The surface pressure-area (π-A) isotherms of these monolayers have been measured with a film balance and monolayer morphology has been observed by a Brewster angle microscopy (BAM). The DPPG monolayers on pure water do not show any phase transition but show irregular shaped condensed phases formed just after evaporation of the solvent at 20 °C. However, this monolayer on l-arg solution subphase indicates a first-order phase transition from liquid expanded to liquid condensed (LE-LC) phases and forms LC domains at the same temperature. With an increase in the l-arg concentration in the subphase up to 5.0 × 10^-4 M, the π-A shows an overall increasingly greater expansion in the molecular area. All of the π-A isotherms recorded on ≥5.0 × 10^-4 M l-arg solution subphases almost coincide with each other. These changes in the phase behavior have been explained by the fact that l-arg having guanidinium cationic group undergoes strong hydrogen bonding interaction with the anionic phosphatidylglycerol (PG-) head group. The bonding between two molecules is further strengthened by electrostatic attraction between cationic l-arg and anionic PG- ions. The BAM observation of the monolayer morphology supports this explanation. On the other hand, a very negligible interaction has been observed between l-arg and DPPC or DPPE monolayers. The π-A isotherms in the presence of l-arg for both the amphiphiles show a very little expansion only in the LE phase region, but coincide in the so called solid phase region. The monolayer morphology of both the monolayers also supports these results. This little effect of expansion in the LE region may be explained by the ion-pair formation between cationic l-arg and anionic head groups in the monolayers at lower pressures. However, due to compression at high pressure, the l-arg molecules are squeezed out from the amphiphile head groups.

Study of the Mechanism of the Antimicrobial Activity of Novel Water Soluble Ammonium Quaternary Benzanthrone on Model Membranes

The increasing resistance of many pathogens to most of the common antimicrobials requires the development of new substances with more effective antimicrobial properties. In the present work, we investigated the mechanism of the antimicrobial activity of novel water soluble ammonium quaternary benzanthrone (Compound B) on model membranes, composed of dipalmitoylphosphatidylcholine, 1-palmitoyl-2-oleoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, 1-palmitoyl-2-oleoylphosphatidylglycerol, and dipalmitoylphosphatidylethanolamine (DPPE). The lipids were chosen to represent a model of a bacterial membrane. The changes in surface pressure of the model membranes, before and after the addition of Compound B, were studied by the Langmuir's monolayer method, and the compressional modulus for each monolayer was determined. In addition, the surface morphology of the lipid monolayers before and after injection of Compound B was monitored by Brewster Angle Microscopy. The results showed that Compound B penetrated all the monolayers studied. The most noticeable effects were found with the negatively charged phosphatidylglycerols and with DPPE leading to the conclusion that the electrostatic interactions between the compound and the lipid head groups and the possible formation of hydrogen bonds between the amino group of the ethanolamine and the keto groups in the structure of Compound B are of great importance. In addition, the penetration ability of the benzoquinone with all phospholipids studied was stable even at higher values of the surface pressure, i.e. thicker monolayers, due to the hydrophobic interaction, which plays also an important role for the antimicrobial activity of Compound B.

Effect of Mineral-Oil Addition on Film Stability of Polar Lipid Constituents Derived from Meibum

We studied the effects of mineral oil (MO) on the properties and structure of a spread monolayer of polar lipid constituents in meibum, by performing cyclic lateral compression-expansion experiments using a Langmuir trough. A meibum sample without nonpolar lipids (meibumΔnonpolar-lipid) was prepared by removing the nonpolar lipids from biological meibum extruded from rabbit eyelids and spread on a water surface for measuring the cyclic surface pressure (π)-film area (A) isotherms with in situ observation of the film morphology using a Brewster angle microscope. The meibumΔnonpolar-lipid formed a homogeneous fluid monolayer and underwent collapse upon compression. The π-A isotherm shifted to a smaller area upon repeating the compression-expansion cycles. These observations contrasted those obtained for meibum previously, which may have resulted from the absence of nonpolar lipids. The recovery of the film stability against the lateral compression-expansion cycles was analyzed by adding MO as a nonpolar compound to the film system. A spread film of 1:1 mixture (by weight) could recover the high reversibility of the π-A isotherms during the repeated compression and expansion processes.

Interaction of chitosan derivatives with cell membrane models in a biologically relevant medium

HYPOTHESIS

The interaction of chitosan, a natural biopolymer with various biomedical applications, with lipid Langmuir films has been widely investigated as a simple model for cell membranes. However, to ensure polymer solubility, up to now only acidic subphases with pH significantly below biological fluids have been used. To increase the biological significance of these investigations, here we evaluated the effects of two chitosan derivatives (low molecular weight - CH, and positively charged - CH-P40) on phospholipid films (either zwitterionic DPPC or anionic DPPG) using phosphate buffered saline solutions (PBS) as a subphase.

EXPERIMENTS

Surface pressure - area (π-A) isotherms were used to evaluate the expansion and changes in film elasticity, while Sum-Frequency Generation (SFG) vibrational spectroscopy provided information about the chain conformation of lipids.

FINDINGS

It was found that chitosans caused a small expansion of the DPPC film by its insertion within the monolayer. In contrast, they distinctly expanded DPPG monolayers by both chitosan insertion within the lipid monolayer and by interacting with the anionic head group. Therefore, PBS buffer can be used as a subphase for more biologically relevant studies of chitosan interactions with Langmuir films, shedding light on why chitosan is antibacterial but not toxic to mammals, as the interaction mechanism depends on lipid headgroup charge.

Differential impact of synthetic antitumor lipid drugs on the membrane organization of phosphatidic acid and diacylglycerol monolayers

Anti-tumour lipids are synthetic analogues of lysophosphatidylcholine. These drugs are both cytotoxic and cytostatic, and more interestingly, exert these effects preferentially in tumour cells. While the exact mechanism of action isn't fully elucidated, these drugs appear to preferentially partition into rigid lipid domains in cell membranes. Upon insertion, the compounds alter membrane domain organization, disrupt normal signal transduction, and cause cell death. Recently, it has been reported that these drugs induce accumulation of diacylglycerol in yeast cells which in turn sensitizes cells to the drugs. Conversely, phosphatidic acid accumulation appears to protect cells against the drugs. In the current work, the aim was to compare the biophysical effects of the drugs edelfosine, miltefosine and perifosine on monolayers of dimyristoyl phosphatidic acid, dimyristoyl glycerol and an equimolar mixture, to understand how these lipids modulate the mode of action. Surface pressure - area isotherms, compression moduli and Brewster angle microscopy were used to compare drug effects on lipid packing, monolayer compressibility and lateral domain organization of these films. Results suggest that edelfosine and miltefosine have stabilizing effects on all of the monolayers, while perifosine destabilizes dimyristoyl glycerol and the equimolar mixture. Additionally, all three drugs change the morphology of the domains observed. Based on these results the stabilization of diacylgylcerol by edelfosine and miltefosine may contribute to the mode of action as diacylglycerol is a known disruptor of bilayers. Perifosine however does not stabilize diacylglycerol, and therefore cell death may occur through a more direct inhibition of specific signal transduction. These results suggest that perifosine may illicit cytotoxicity through a different mechanism compared to the other antitumor lipid drugs.

Rapid biophysical analyses of gastric aspirates from risk newborns for lung maturity assessment after corticosteroid therapy

BACKGROUND

One of the main causes for the higher mortality among risk newborn children (including preterm infants) is neonatal respiratory distress syndrome (NRDS), which develops as a result of primary deficiency or secondary inactivation of alveolar surfactant (AS). Therefore, fast and early diagnostics of risk newborns lung maturity is crucial for their prompt therapy.

MATERIALS AND METHODS

Gastric aspirates (GA) were collected from 77 infants divided into three groups: a control of 38 healthy full-term infants; 16 prematurely newborns with NRDS, and 23 prematurely born infants after in vitro fertilization and corticosteroid therapy (CST). Surface parameters: equilibrium (γeq), maximal (γmax) and minimal (γmin) surface tension, and the shape of hysteresis curves of GA monolayers were measured by axisymmetric drop shape analysis (ADSA) of a pending drop. In addition, the morphology of GA monolayers was studied by Brewster angle microscopy (BAM).

RESULTS

Our results showed that only γmin values were reliable and were significantly lower in full-term infants, as compared to the risk neonates. The results obtained were proved by the shape of hysteresis curves of GA surface active films. BAM images of GA monolayers from NRDS group showed impaired surface morphology due to the surfactant insufficiency, as compared to the control group. Corticosteroid therapy improved both GA surface characteristics and monolayer morphology.

CONCLUSIONS

GAs analyses by ADSA and BAM are fast and informative approaches for lung maturity assessment. In addition, the corticosteroid therapy applied improved all GAs surface parameters due to AS maturation.

The impact of toxic bisphenols on model human erythrocyte membranes

Bisphenols are the environmental pollution of a highly harmful, but different in their magnitude, influence on the living organisms. Among various aspects of the toxicity of these compounds their effect on the red blood cells is intensively investigated. The aim of this work was to compare the effect of bisphenol A (BPA), bisphenol S (BPS) and bisphenol F (BPF) on model erythrocyte membranes and to get insight into the origin of the differences in the harmful effect of these substances on cells. Thus, the influence of bisphenols on multicomponent Langmuir films imitating the outer leaflet of erythrocyte membrane was thoroughly analyzed. An important step of the experiments were the studies on the effect of bisphenols on the films composed from particular erythrocyte membrane lipids. It was confirmed that both BPA and BPF affect model lipid systems more strongly than BPS, by changing their condensation, ordering, stability and morphology. However, the most essential conclusion was that BPA acts on the erythrocyte lipids more selectively than BPS and BPF and the influence exerted by this molecule is more strongly determined by the membrane composition. It was also suggested that cholesterol may act as the molecule of a decisive role from the point of view of the magnitude of the incorporation and the effect of BPA and BPF on membrane. Thus, the level of bisphenols toxicity to erythrocytes may depend on the concentration of cholesterol in their membranes.

Interfacial Behavior of Oligo(Ethylene Glycol) Dendrons Spread Alone and in Combination with a Phospholipid as Langmuir Monolayers at the Air/Water Interface

Dendrons consisting of two phosphonate functions and three oligo(ethylene glycol) (OEG) chains grafted on a central phenoxyethylcarbamoylphenoxy group were synthesized and investigated as Langmuir monolayers at the surface of water. The OEG chain in the para position was grafted with a t-Bu end-group, a hydrocarbon chain, or a partially fluorinated chain. These dendrons are models of structurally related OEG dendrons that were found to significantly improve the stability of aqueous dispersions of iron oxide nanoparticles when grafted on their surface. Compression isotherms showed that all OEG dendrons formed liquid-expanded Langmuir monolayers at large molecular areas. Further compression led to a transition ascribed to the solubilization of the OEG chains in the aqueous phase. Brewster angle microscopy (BAM) provided evidence that the dendrons fitted with hydrocarbon chains formed liquid-expanded monolayers throughout compression, whilst those fitted with fluorinated end-groups formed crystalline-like domains, even at large molecular areas. Dimyristoylphosphatidylcholine and dendron molecules were partially miscible in monolayers. The deviations to ideality were larger for the dendrons fitted with a fluorocarbon end-group chain than for those fitted with a hydrocarbon chain. Brewster angle microscopy and atomic force microscopy supported the view that the dendrons were ejected from the phospholipid monolayer during the OEG conformational transition and formed crystalline domains on the surface of the monolayer.

Interactions of cholesterol and 7‑ketocholesterol with unsaturated fatty acids of different unsaturation degree - The monolayer study

Unsaturated fatty acids (UFAs) are known to lower the level of sterols in blood, which accounts for their cardioprotective effect. To understand the molecular basis of this effect, Langmuir monolayer studies have been performed. A series of UFAs differing in the length of the fatty acid chain and the number of double bonds (oleic acid, OA; linoleic acid, LA; stearidonic acid, SDA; eicosanoic acid, EA) were mixed with cholesterol and its more toxic oxidized derivative, 7‑ketocholesterol (7-KC), abundantly present in atheroma plaques. Strong attractive UFA-sterol interactions were attributed to the formation of "surface complexes", in which sterol molecules are bound, thereby reducing the amount of free sterol molecules. It has been found that strength of interactions increases with the degree of unsaturation of the acyl chain in UFA molecule. The most attractive interactions correspond to mixtures with SDA containing 70 mol% of 7-KC and 50 mol% of cholesterol. In both cases, the formation of high stability complexes of, respectively, 2:1 and 1:1 sterol/SDA stoichiometry has been proposed. Other complexes of lower stability and 1:2 stoichiometry were postulated for chol (or 7-KC)/LA systems. The complexes of the lowest stability correspond to chol (or 7-KC) mixtures with OA and EA of 1:1 stoichiometry. In all the cases, the interactions of 7-KC with UFAs are more energetically favorable versus cholesterol. The elongation of the hydrophobic chain of UFAs decreased the interactions with the studied sterols. The obtained results can be related to different conformations of the fatty acids chains.

The influence of terpinen-4-ol and eucalyptol - The essential oil components - on fungi and plant sterol monolayers

Antifungal and herbicidal activity of terpenes, being the components of the essential oils, is directly related to the incorporation of these compounds into cellular membranes. Thus, the differences in the lipid composition of various pathogenic membranes may be the factor determining the activity of these molecules. One of the class of lipids, which form the membrane environment are sterols. The aim of this work was to compare the effect of two terpenes: terpinen-4-ol and eucalyptol on the monolayers formed by ergosterol and β - sitosterol, which are the components of fungi and plant membranes, respectively. The modifications in the sterol monolayer properties were investigated in the surface pressure-area measurements and penetration studies as well as in a micrometer scale (Brewster angle microscopy experiments) and in nanoscale (GIXD technique). It was evidenced that although at higher surface pressure the terpene molecules are in part removed from the interface, they are able to substantially modify the condensation, morphology and molecular organization of the sterol film. It was also found that the incorporation of terpenes into sterol films is comparable for both sterols, however, β - sitosterol monolayers properties are affected more strongly than ergosterol films. Finally, the analysis of the results of the studies performed on model membrane systems and the results of antimicrobial studies reported in literature, enabled us to suggest that the activity of terpenes depends on the membrane composition and that the sterol concentration may be important from the point of view of antifungal effect of terpinen-4-ol and eucalyptol.

Psychosine remodels model lipid membranes at neutral pH

β-Galactosylsphingosine or psychosine (PSY) is a single chain sphingolipid with a cationic group, which is degraded in the lysosome lumen by β-galactosylceramidase during sphingolipid biosynthesis. A deficiency of this enzyme activity results in Krabbe's disease and PSY accumulation. This favors its escape to extralysosomal spaces, with its pH changing from acidic to neutral. We studied the interaction of PSY with model lipid membranes in neutral conditions, using phospholipid vesicles and monolayers as classical model systems, as well as a complex lipid mixture that mimics the lipid composition of myelin. At pH 7.4, when PSY is mainly neutral, it showed high surface activity, self-organizing into large structures, probably lamellar in nature, with a CMC of 38 ± 3 μM. When integrated into phospholipid membranes, PSY showed preferential partition into disordered phases, shifting phase equilibrium. The presence of PSY reduces the compactness of the membrane, making it more easily compressible. It also induces lipid domain disruption in vesicles composed of the main myelin lipids. The surface electrostatics of lipid membranes was altered by PSY in a complex manner. A shift to positive zeta potential values evidenced its presence in the vesicles. Furthermore, the increase of surface potential and surface water structuring observed may be a consequence of its location at the interface of the positively charged layer. As Krabbe's disease is a demyelinating process, PSY alteration of the membrane phase state, lateral lipid distribution and surface electrostatics appears important to the understanding of myelin destabilization at the supramolecular level.

Mesoscopic characterization of amphiphilic monoglycerol monolayers

The introduction of the highly-sensitive imaging technique Brewster angle microscopy (BAM) has given rise to new knowledges about the mesoscopic topology and ordering of condensed phase domains formed in the two-phase coexistence region of Langmuir monolayers. Besides fatty acids, monoalkanoylglycerols are the most studied amphiphiles at the air-water interface. In this review, the mesoscopic characterization of amphiphilic monoglycerol monolayers is surveyed to demonstrate the striking effect of the position of the glycerol backbone at which the polar head group is substituted. Systematic mesoscopic studies of amphiphilic monoglycerol monolayers offer an outstanding possibility to highlight the dramatic effect of chemical structure variations at the position of the glycerol backbone and the substituted polar groups on the basis of the mesoscopic characterization. Small changes in the polarity by slight variation in the head group structure can dramatic affect shape and organization of the condensed phase domains. According to the importance of the 1-substituted monoglycerols, the effect of the chemical structure of the substituted polar group is highlighted with 4 selected examples. Further main topics discussed are chiral discrimination, kinetics of non-equilibrium structures, electrostatic interactions and a new geometric concept for explaining the topology of condensed phase domains.

Properties of Artificial Phospholipid Membranes Containing Lauryl Gallate or Cholesterol

Lauryl gallate (LG) is an antioxidant agent. However, it exhibits poor solubility in water. Its interactions with the membrane result in structure evolution thus affecting the membrane functionality. In this paper the Brewster angle microscope coupled with the Langmuir trough was applied to determine the morphology, phase behaviour, thickness and miscibility of ternary Langmuir monolayers with equal mole fractions of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC); 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and an increasing mole fraction of LG. The results were discussed as regards analogous systems where cholesterol (Chol) was the third component. Moreover, the phosphatidylcholine–lauryl gallate (PC–LG) interactions were monitored by the attenuated total reflectance Fourier transform infrared spectroscopy and time-of-flight secondary ion mass spectrometry. Besides lipid composition, the addition of LG was found to be a significant factor to modulate the model membrane properties. The LG molecules adjust themselves to the PC monolayer structure. The hydrophobic fragment is dipped into the membrane interior while the hydroxyl groups of phenolic gallate moiety associate with the polar groups of PC mainly through hydrogen bonding inducing the compacting effect. LG is found to be deeply submerged within DOPC, closer to the double bonds, and its insertion practically does not affect the DPPC/DOPC membrane fluidity. This is crucial for getting more profound insight into the role of LG in stabilizing the non-raft domains, mostly exposed to oxidation in which LG can co-localize and serve its antioxidant function.

Structure-Dependent Interfacial Properties of Chaplin F from Streptomyces coelicolor

Chaplin F (Chp F) is a secreted surface-active peptide involved in the aerial growth of Streptomyces. While Chp E demonstrates a pH-responsive surface activity, the relationship between Chp F structure, function and the effect of solution pH is unknown. Chp F peptides were found to self-assemble into amyloid fibrils at acidic pH (3.0 or the isoelectric point (pI) of 4.2), with ~99% of peptides converted into insoluble fibrils. In contrast, Chp F formed short assemblies containing a mixture of random coil and β-sheet structure at a basic pH of 10.0, where only 40% of the peptides converted to fibrils. The cysteine residues in Chp F did not appear to play a role in fibril assembly. The interfacial properties of Chp F at the air/water interface were altered by the structures adopted at different pH, with Chp F molecules forming a higher surface-active film at pH 10.0 with a lower area per molecule compared to Chp F fibrils at pH 3.0. These data show that the pH responsiveness of Chp F surface activity is the reverse of that observed for Chp E, which could prove useful in potential applications where surface activity is desired over a wide range of solution pH.

The many faces (and phases) of ceramide and sphingomyelin II - binary mixtures

A rather widespread idea on the functional importance of sphingolipids in cell membranes refers to the occurrence of ordered domains enriched in sphingomyelin and ceramide that are largely assumed to exist irrespective of the type of N-acyl chain in the sphingolipid. Ceramides and sphingomyelins are the simplest kind of two-chained sphingolipids and show a variety of species, depending on the fatty acyl chain length, hydroxylation, and unsaturation. Abundant evidences have shown that variations of the N-acyl chain length in ceramides and sphingomyelins markedly affect their phase state, interfacial elasticity, surface topography, electrostatics, and miscibility, and that even the usually conceived "condensed" sphingolipids and many of their mixtures may exhibit liquid-like expanded states. Their lateral miscibility properties are subtlety regulated by those chemical differences. Even between ceramides with different acyl chain length, their partial miscibility is responsible for a rich two-dimensional structural variety that impacts on the membrane properties at the mesoscale level. In this review, we will discuss the miscibility properties of ceramide, sphingomyelin, and glycosphingolipids that differ in their N-acyl or oligosaccharide chains. This work is a second part that accompanies a previous overview of the properties of membranes formed by pure ceramides or sphingomyelins, which is also included in this Special Issue.

The many faces (and phases) of ceramide and sphingomyelin I - single lipids

Ceramides, the simplest kind of two-chained sphingolipids, contain a single hydroxyl group in position 1 of the sphingoid base. Sphingomyelins further contain a phosphocholine group at the OH of position 1 of ceramide. Ceramides and sphingomyelins show a variety of species depending on the fatty acyl chain length, hydroxylation, and unsaturation. Because of the relatively high transition temperature of sphingomyelin compared to lecithin and, particularly, of ceramides with 16:0-18:0 saturated chains, a widespread idea on their functional importance refers to formation of rather solid domains enriched in sphingomyelin and ceramide. Frequently, and especially in the cell biology field, these are generally (and erroneously) assumed to occur irrespective on the type of N-acyl chain in these lipids. This is because most studies indicating such condensed ordered domains employed sphingolipids with acyl chains with 16 carbons while scarce attention has been focused on the influence of the N-acyl chain on their surface properties. However, abundant evidence has shown that variations of the N-acyl chain length in ceramides and sphingomyelins markedly affect their phase state, interfacial elasticity, surface topography, electrostatics and miscibility and that, even the usually conceived "condensed" sphingolipids and many of their mixtures, may exhibit liquid-like expanded states. This review is a summarized overview of our work and of related others on some facts regarding membranes composed of single molecular species of ceramide and sphingomyelin. A second part is dedicated to discuss the miscibility properties between species of sphingolipids that differ in N-acyl and oligosaccharide chains.

Interfacial properties of avian stratum corneum monolayers investigated by Brewster angle microscopy and vibrational sum frequency generation

The outermost layer of skin, the stratum corneum (SC), contains a complex mixture of lipids, which controls the rate of cutaneous water loss (CWL) in reptiles, mammals, and birds. However, the molecular structure of SC lipids and how molecular configurations influence CWL is poorly understood. Here, the organization and structure of SC lipids extracted from birds were investigated by means of Langmuir films. Properties of lipids from the SC of arid and semi-arid adapted larks, known to have a low CWL, were compared with lipids extracted from the SC of mesic lark species with higher CWL to gain insight into how structure impacts CWL. Film properties were probed with surface pressure-area isotherms, Brewster angle microscopy (BAM), and vibrational sum frequency generation (VSFG). Results indicate organization and ordering of SC lipids in the arid-adapted hoopoe lark was vastly different from all other species, forming a miscible, rigid monolayer, whereas monolayers from semi-arid and mesic species were immiscible and disordered. Probing of interfacial water structure reveals that film morphology determines organization of water molecules near the monolayer; monolayers with a porous morphology had an increased population of water molecules that are weakly hydrogen-bonded. In general, CWL appears related to the miscibility and ordering of lipid components within the SC, as well as the ability of these lipids to interact with water molecules. From a broader perspective, CWL in larks appears linked to both the SC lipid composition and the aridity of the species' environment.

The insertion of Polybia-MP1 peptide into phospholipid monolayers is regulated by its anionic nature and phase state

Polybia-MP1 or simply MP1 (IDWKKLLDAAKQIL-NH₂) is a peptide with broad-spectrum bactericidal activity and a strong inhibitory effect against cancer cells. The aim of this work was to evaluate the effect of biophysical properties such as membrane texture and film thickness on MP1 interaction with neutral and anionic lipid membranes. For this purpose, we first explored the peptide's surface behavior. MP1 showed high surface activity, adsorbing onto bare air/aqueous interfaces up to higher surface pressures than the collapse pressure of MP1 Langmuir films. The MP1-lipid membrane interaction was studied using Langmuir phosphatidylcholine and phosphatidylserine (PS) monolayers as model membrane systems. PS was chosen since this negatively charged lipid was found predominantly on the outer leaflet of tumor cells, and it enhances MP1 activity for PS-containing membranes to a greater extent than for other negatively charged lipids. MP1 incorporated into anionic PS monolayers, which show a liquid-expanded (LE) phase or LE-liquid-condensed (LC) phase coexistence, up to lipid-packing densities higher than those of cell membranes. The mixed lipid/MP1 films were explored by Brewster angle microscopy and atomic force microscopy. MP1 partitioned preferentially into the LE phase state of PS films, and were thus excluded from the coexisting LC phase. This interaction had strong electrostatic bases: in pure water, the lipid-peptide interaction was strong enough to induce formation of reversible lipid-peptide 3D structures associated with the interface. MP1 incorporation into the LE phase was accompanied by a shift of the phase transition pressure to higher values and a thinning of the lipid film. These results showed a clear correlation between peptide penetration capacity and the presence or induction of the thin LE phase. This capacity to regulate membrane physical properties may be of relevance in the binding, incorporation and membrane selectivity of this promising antitumor peptide.

Applications of Brewster angle microscopy from biological materials to biological systems

Brewster angle microscopy (BAM) is a powerful technique that allows for real-time visualization of Langmuir monolayers. The lateral organization of these films can be investigated, including phase separation and the formation of domains, which may be of different sizes and shapes depending on the properties of the monolayer. Different molecules or small changes within a molecule such as the molecule's length or presence of a double bond can alter the monolayer's lateral organization that is usually undetected using surface pressure-area isotherms. The effect of such changes can be clearly observed using BAM in real-time, under full hydration, which is an experimental advantage in many cases. While previous BAM reviews focused more on selected compounds or compared the impact of structural variations on the lateral domain formation, this review provided a broader overview of BAM application using biological materials and systems including the visualization of amphiphilic molecules, proteins, drugs, extracts, DNA, and nanoparticles at the air-water interface.

The effect of repeated lateral compression and expansions mimicking blinking on selected tear film polar lipid monofilms

The tear film lipid layer is formed on the anterior surface of the eye, functioning as a barrier to excess evaporation and foreign particles, while also providing stability to the tear film. The lipid layer is organized into a polar lipid layer consisting of phospholipids, ceramides, and free fatty acids that act as a surfactant to a non-polar multilayer of wax and cholesterol esters. Due to shear forces from eye movement and the compression and expansion of blinking, the tear lipids are under constant stress. However, tear film is able to resist immediate rupture and remains intact over multiple blinks. This work aimed to better understand the lateral organization of selected tear film polar lipids. The polar lipid biomimetic studied here consisted of dipalmitoyl phosphatidylcholine (DPPC), dipalmitoyl phosphatidylethanolamine (DPPE), palmitoyl glucosylceramide (PGC), and palmitoyl sphingomyelin (PSM). Surface pressure-area isocycles mimicked blinking and films were visualized by Brewster angle microscopy (BAM). All lipid systems formed relatively reversible films as indicated by limited hysteresis. However, pure DPPC and PSM films experienced greater changes in lipid packing upon compression and expansion compared to pure PGC and DPPE. This suggests that the driving force behind maintaining the lateral organization of the polar lipids from tear film may be the hydrogen bonding propensities of the head groups. Additionally, isocycles of films containing DPPC, DPPE, and PGC mixtures exhibited evidence for reversible multilayer formation or folding. This was supported by 3D analysis of structures that formed during compression but reintegrated back into the bulk lipid film during expansion near the in vitro tear film surface pressure of the open eye. Therefore, the polar lipids of tear film may be directly involved in preventing film rupture during a blink.

Enzymatic Degradation of Oligo(ε-caprolactone)s End-Capped with Phenylboronic Acid Derivatives at the Air-Water Interface

The influence of terminal functionalization of oligo(ε-caprolactone)s (OCL) with phenylboronic acid pinacol ester or phenylboronic acid on the enzymatic degradation behavior at the air-water interface is investigated by the Langmuir monolayer degradation technique. While the unsubstituted OCL immediately degrades after injection of the enzyme lipase from Pseudomonas cepacia, enzyme molecules are incorporated into the films based on end-capped OCL before degradation. This incorporation of enzymes does not inhibit or suppress the film degradation, but retards it significantly. A specific binding of lipase to the polymer monolayer allows studying the enzymatic activity of bound proteins and the influence on the degradation process. The functionalization of a macromolecule with phenyl boronic acid groups is an approach to investigate their interactions with diol-containing biomolecules like sugars and to monitor their specified impact on the enzymatic degradation behavior at the air-water interface.

Interactions of lauryl gallate with phospholipid components of biological membranes

The effect of different amounts of lauryl gallate (LG) on properties of the model membranes of phosphatidylcholines (PC), differing in the presence of double bonds in the hydrocarbon chains, and phosphatidylglycerol (PG) was described in terms of phase behaviour of mixtures, interactions between both components, monolayers stability and their organization. The Langmuir monolayer technique was used to monitor the surface thermodynamics (i.e. the excess area and excess Gibbs energy of mixing) on the basis of surface pressure-area per molecule (π-A) isotherms. Simultaneously, morphology of the studied monolayers was visualized by the Brewster angle microscopy (BAM). This allowed evaluating the kind and magnitude of interactions which influence on the phase behaviour and structural properties of the monolayers. The obtained results can be helpful to reveal the mechanism of phospholipid antioxidant protection and important pharmacological (antimicrobial) role of lauryl gallate for production of effective therapeutic substances.

Biophysical characterization of monofilm model systems composed of selected tear film phospholipids

The tear film protects the eye from foreign particles and pathogens, prevents excess evaporation, provides lubrication, and maintains a high quality optical surface necessary for vision. The anterior layer of tear film consists of polar and non-polar lipid layers. The polar lipids form a monolayer on the aqueous subphase, acting as surfactants for the non-polar lipid multilayer. A tear film polar lipid biomimetic consisting of dipalmitoyl phosphatidylcholine (DPPC), dipalmitoyl phosphatidylethanolamine (DPPE), palmitoyl glucosylceramide (PGC), and palmitoyl sphingomyelin (PSM) was characterized using Langmuir monolayers and Brewster angle microscopy (BAM). Lipid combinations formed very stable monolayers, especially those containing DPPC or PSM. Surface experiments and elasticity analyses revealed that PGC resulted in more condensed and rigid mixed monolayers. DPPE provided resistance to large changes in lipid ordering over a wide surface pressure range. Ternary mixtures containing DPPE and PGC with either DPPC or PSM experienced the greatest lipid ordering within the natural tear film surface pressure range suggesting that these lipids are important to maintain tear film integrity during the inter-blink period. Finally, BAM images revealed unique structures within monolayers of DPPC, DPPE, and PGC at the natural tear film surface pressure. 3D analysis of these domains suggested either the formation of multilayers or outward protrusions at surface pressures far below the point of irreversible collapse as seen on the isotherm. This entails that the polar lipids of tear film may be capable of multilayer formation or outward folding as a mechanism to prevent rupture of the tear film during a blink.

Direct observation by using Brewster angle microscopy of the diacetylene polimerization in mixed Langmuir film

Mixed Langmuir monolayers of 10,12-Pentacosadiynoic acid (DA) and amphiphilic hemicyanine (HSP) have been fabricated at the air-water interface. The mixed monolayer has been proved to be completely homogeneous. The DA molecules are arranged in a single monolayer within the mixed Langmuir monolayer, as opposed to the typical trilayer architecture for the pure DA film. Brewster angle microscopy has been used to reveal the mesoscopic structure of the mixed Langmuir monolayer. Flower shape domains with internal anisotropy due the ordered alignment of hemicyanine groups have been observed. Given the absorption features of the hemicyanine groups at the wavelength used in the BAM experiments, the enhancement of reflection provoked by the absorption process leads to the observed anisotropy. The ordering of such groups is promoted by their strong self-aggregation tendency. Under UV irradiation at the air-water interface, polydiacetylene (PDA) has been fabricated. In spite a significant increase in the domains reflectivity has been observed owing to the modification in the mentioned enhanced reflection, the texture of the domains remains equal. The PDA polymer chain therefore grows in the same direction in which the HSP molecules are aligned. This study is expected to enrich the understanding and design of fabrication of PDA at interfaces.

Influence of platelet-activating factor, lyso-platelet-activating factor and edelfosine on Langmuir monolayers imitating plasma membranes of cell lines differing in susceptibility to anti-cancer treatment: the effect of plasmalogen level

Three structurally related but differing in biological activities single-chained ether phospholipids (PAF (platelet-activating factor) and lyso-PAF) and an anti-cancer drug (edelfosine (ED)) were investigated in Langmuir monolayers imitating natural membranes. The aim of the undertaken experiments was to study the influence of these lipids on monolayers mimicking plasma membranes of cell lines differing in susceptibility to the anti-cancer activity of ED, i.e. promyelocytic leukaemia cells (HL-60) and promyeloblastic leukaemia cells (K-562). As these cells differ essentially in the cholesterol/phospholipid ratio and plasmalogen concentration in the membrane, we have carried out systematic investigations in artificial systems of various compositions. The results for model leukaemia cell membrane were compared with data acquired for systems imitating normal leucocytes. Our results show that the level of plasmalogens significantly modulates the influence of the single-chained phospholipids on the investigated systems. The experiments confirmed also that the interactions of ether lipids with a model membrane of HL-60 cells (in biological tests sensitive to ED) have opposite character when compared with K-562, being resistant to ED. Moreover, the values of the parameters characterizing monolayers serving as membrane models (strength of interactions, monolayers fluidity and morphology) proved both sensitivity of these cells to ED and lack of their susceptibility towards PAF. Interestingly, it has been found that lyso-PAF, which is usually described as an inactive precursor of PAF, displays a stronger effect on HL-60 model membranes than ED.

Use of 1H NMR STD, waterLOGSY, and Langmuir monolayer techniques for characterization of drug-zein protein complexes

Zein is a protein based natural biopolymer containing a large amount of nonpolar amino acids, which has shown the ability to form aggregates and entrap solutes, such as drugs and amino acids to form stable protein-drug complexes. In this work, π-A isotherm, NMR, and Dynamic light scattering were used to detect the formation of protein aggregates and the affinity between zein and two different drugs: tetracycline and indomethacin. An effective interaction of zein and the two drugs was evidenced by means of liquid NMR reinforced by means of changes in the surface pressure by π-A isotherm. The effective interactions zein/drugs under air/water interface were evidenced as a change in the surface pressure of the π-A isotherm of zein in the presence of drug solutions. The presence of tetracycline in the subphase decreased the area occupied by the monolayer at the expanded region until pressures of 12 mN/m were the areas became similar, but indomethacin produces an increment of the area in both expanded and collapsed region. The feasible methodology employed, focused in the functionality of the protein-drug interaction, can be very promising in the drug delivery field.

Morphological Transformations in Solid Domains of Alkanes on Surfactant Solutions

Alkanes on surfactant solutions can form three distinct phases at the air-solution interface, a liquid phase (L), a solid monolayer phase (S1), and a hybrid bilayer phase (S2). Phase coexistence between any two, or all three, of these phases has been observed by Brewster angle microscopy of tetradecane, hexadecane, and their mixtures on solutions of tetradecyltrimethylammonium bromide. The morphologies of the domains depend on the competition between line tension and electrostatic interactions, which are essentially different depending on the pair of phases in contact. Domains of S1 in the L phase are long and thin; however, long, thin domains of L in an S1 phase are not stable but break up into a string of small circular domains. The bilayer S2 domains are always circular, owing to the dominance of line tension on the morphology.

The Langmuir-Blodgett technique as a tool for homeotropic alignment of fluorinated liquid crystals mixed with arachidic acid

Some fluoro-substituted liquid crystals mixed with arachidic acid in monolayers formed at air-liquid (Langmuir films) and air-solid substrate (Langmuir-Blodgett films) interfaces were investigated. Molecular organization in Langmuir films was determined on the basis of the analysis of the shape of the surface pressure-mean molecular area isotherm and observations made by means of a Brewster angle microscope. It was found that in the compression process the liquid crystal molecules are pushed out towards the top of the first monolayer being in direct contact with the subphase. Langmuir films were transferred onto the quartz substrates at various surface pressures and mono- and multilayered Langmuir-Blodgett films were obtained. The films were characterized using electronic absorption measurements. The conditions for obtaining the homeotropic orientation of the liquid crystal molecules were determined.