Curcumin-Poly(sodium 4-styrenesulfonate) Conjugates as Potent Zika Virus Entry Inhibitors

Curcumin, a natural product with recognized antiviral properties, is limited in its application largely due to its poor solubility. This study presents the synthesis of water-soluble curcumin-poly(sodium 4-styrenesulfonate) (Cur-PSSNan) covalent conjugates. The antiflaviviral activity of conjugates was validated in vitro by using the Zika virus as a model. In the development of these water-soluble curcumin-containing derivatives, we used the macromolecules reported by us to also hamper viral infections. Mechanistic investigations indicated that the conjugates exhibited excellent stability and bioavailability. The curcumin and macromolecules in concerted action interact directly with virus particles and block their attachment to host cells, hampering the infection process.

Reversible rearrangement of the cellular cytoskeleton: A key to the broad-spectrum antiviral activity of novel amphiphilic polymers

The battle against emerging viral infections has been uneven, as there is currently no broad-spectrum drug available to contain the spread of novel pathogens throughout the population. Consequently, the pandemic outbreak that occurred in early 2020 laid bare the almost empty state of the pandemic box. Therefore, the development of novel treatments with broad specificity has become a paramount concern in this post-pandemic era. Here, we propose copolymers of poly (sodium 2-(acrylamido)-2-methyl-1-propanesulfonate) (PAMPS) and poly (sodium 11-(acrylamido)undecanoate (AaU), both block (PAMPS75-b-PAaUn) and random (P(AMPSm-co-AaUn)) that show efficacy against a broad range of alpha and betacoronaviruses. Owing to their intricate architecture, these polymers exhibit a highly distinctive mode of action, modulating nano-mechanical properties of cells and thereby influencing viral replication. Through the employment of confocal and atomic force microscopy techniques, we discerned perturbations in actin and vimentin filaments, which correlated with modification of cellular elasticity and reduction of glycocalyx layer. Intriguingly, this process was reversible upon polymer removal from the cells. To ascertain the applicability of our findings, we assessed the efficacy and underlying mechanism of the inhibitors using fully differentiated human airway epithelial cultures, wherein near-complete abrogation of viral replication was documented. Given their mode of action, these polymers can be classified as biologically active nanomaterials that exploit a highly conserved molecular target-cellular plasticity-proffering the potential for truly broad-spectrum activity while concurrently for drug resistance development is minimal.

Electrical stimulation methods and protocols for the treatment of traumatic brain injury: a critical review of preclinical research

BACKGROUND

Traumatic brain injury (TBI) is a leading cause of disabilities resulting from cognitive and neurological deficits, as well as psychological disorders. Only recently, preclinical research on electrical stimulation methods as a potential treatment of TBI sequelae has gained more traction. However, the underlying mechanisms of the anticipated improvements induced by these methods are still not fully understood. It remains unclear in which stage after TBI they are best applied to optimize the therapeutic outcome, preferably with persisting effects. Studies with animal models address these questions and investigate beneficial long- and short-term changes mediated by these novel modalities.

METHODS

In this review, we present the state-of-the-art in preclinical research on electrical stimulation methods used to treat TBI sequelae. We analyze publications on the most commonly used electrical stimulation methods, namely transcranial magnetic stimulation (TMS), transcranial direct current stimulation (tDCS), deep brain stimulation (DBS) and vagus nerve stimulation (VNS), that aim to treat disabilities caused by TBI. We discuss applied stimulation parameters, such as the amplitude, frequency, and length of stimulation, as well as stimulation time frames, specifically the onset of stimulation, how often stimulation sessions were repeated and the total length of the treatment. These parameters are then analyzed in the context of injury severity, the disability under investigation and the stimulated location, and the resulting therapeutic effects are compared. We provide a comprehensive and critical review and discuss directions for future research. RESULTS AND CONCLUSION: We find that the parameters used in studies on each of these stimulation methods vary widely, making it difficult to draw direct comparisons between stimulation protocols and therapeutic outcome. Persisting beneficial effects and adverse consequences of electrical simulation are rarely investigated, leaving many questions about their suitability for clinical applications. Nevertheless, we conclude that the stimulation methods discussed here show promising results that could be further supported by additional research in this field.

Novel inhibitors of HSV-1 protease effective in vitro and in vivo

Herpes simplex virus type 1 (HSV-1) is a widespread human pathogen known to cause infections of diverse severity, ranging from mild ulceration of mucosal and dermal tissues to life-threatening viral encephalitis. In most cases, standard treatment with acyclovir is sufficient to manage the disease progression. However, the emergence of ACV-resistant strains drives the need for new therapeutics and molecular targets. HSV-1 VP24 is a protease indispensable for the assembly of mature virions and, as such, constitutes an interesting target for the therapy. In this study, we present novel compounds, KI207M and EWDI/39/55BF, that block the activity of VP24 protease and consequently inhibit HSV-1 infection in vitro and in vivo. The inhibitors were shown to prevent the egress of viral capsids from the cell nucleus and suppress the cell-to-cell spread of the infection. They were also proven effective against ACV-resistant HSV-1 strains. Considering their low toxicity and high antiviral potency, the novel VP24 inhibitors could provide an alternative for treating ACV-resistant infections or a drug to be used in combined, highly effective therapy.

Poly(ethylene glycol)-block-poly(sodium 4-styrenesulfonate) Copolymers as Efficient Zika Virus Inhibitors: In Vitro Studies

A series of poly(ethylene glycol)-block-poly(sodium 4-styrenesulfonate) (PEG-b-PSSNa) copolymers were synthesized, and their antiviral activity against Zika virus (ZIKV) was determined. The polymers inhibit ZIKV replication in vitro in mammalian cells at nontoxic concentrations. The mechanistic analysis revealed that the PEG-b-PSSNa copolymers interact directly with viral particles in a zipper-like mechanism, hindering their interaction with the permissive cell. The antiviral activity of the copolymers is well-correlated with the length of the PSSNa block, indicating that the copolymers' ionic blocks are biologically active. The blocks of PEG present in copolymers studied do not hinder that interaction. Considering the practical application of PEG-b-PSSNa and the electrostatic nature of the inhibition, the interaction between the copolymers and human serum albumin (HSA) was evaluated. The formation of PEG-b-PSSNa-HSA complexes in the form of negatively charged nanoparticles well-dispersed in buffer solution was observed. That observation is promising, given the possible practical application of the copolymers.

P10.03.B Insights into the development of tunable brain implants for local chemotherapy

Background

Glioblastomas (GBMs) remain an unmastered medical challenge. Poor delivery and systemic toxicity of many chemotherapeutic agents limit their therapeutic success in GBM treatment. Bioelectronic implants for local chemo drug delivery can optimize drug concentrations at the tumor site, duration of treatment and tumor suppression, while systemic effects remain at an acceptable low level. We present miniature bioelectronic devices for drug delivery able to administer chemotherapeutics via electric control with high spatiotemporal precision.1 The drug delivery is based on the electro migration of drug molecules in an ion selective matrix towards a target of choice. These bioelectronic devices, called chemotherapeutic ion pumps (chemoIPs), can be used for triggered drug release of chemotherapeutics that are usually shielded by the blood brain barrier.

Material and Methods

The performance of chemoIPs is studied in different brain tumor models with increasing complexity (cell culture and different in vivo models). With chemoIPs it is possible to constantly administer drugs with highest precision (delivery rates at pmol*min-1 precision) towards cell culture spheroids, ex ovo-grown tumors and in vivo brain tumors

Results

The treatment efficiency was analyzed via flow cytometry quantifying apoptosis and cell cycle arrest, as well as immune-histochemical analysis for apoptosis. ChemoIP treatment is able to trigger the disintegration of targeted tumor spheroids, and is able to inhibit the tumor growth of ex ovo-grown glioblastomas significantly. Furthermore, the proteomes of neurons and glioblastoma cells were recorded via proteomics, which showed that only GBM cells are harmed by the chemotherapeutic treatment, but not neurons. In parallel, can follow the pharmacokinetics of the chemoIP-mediated drug administration via drug quantification using mass spectrometry and compare it to computer simulations in different tumor models.

Conclusion

The here exemplified electrically-driven drug delivery via chemoIPs is a drug administration method that can serve as basis for further implant development, which has the potential to increase the efficacy of chemotherapy due to highly-targeted and locally-controlled drug delivery.

Self-Organized Nanoparticles of Random and Block Copolymers of Sodium 2-(acrylamido)-2-methyl-1-propanesulfonate and Sodium 11-(acrylamido)undecanoate as Safe and Effective Zika Virus Inhibitors

A series of anionic homopolymers, poly(sodium 2-(acrylamido)-2-methyl-1-propanesulfonate) (PAMPS) and amphiphilic copolymers of AMPS and sodium 11-(acrylamido)undecanoate (AaU), both block (PAMPS₇₅-b-PAaU_n), and random (P(AMPS_m-co-AaU_n)), were synthesized and their antiviral activity against Zika virus (ZIKV) was evaluated. Interestingly, while the homopolymers showed limited antiviral activity, the copolymers are very efficient antivirals. This observation was explained considering that under the conditions relevant to the biological experiments (pH 7.4 PBS buffer) the macromolecules of these copolymers exist as negatively charged (zeta potential about −25 mV) nanoparticles (4–12 nm) due to their self-organization. They inhibit the ZIKV replication cycle by binding to the cell surface and thereby blocking virus attachment to host cells. Considering good solubility in aqueous media, low toxicity, and high selectivity index (SI) of the PAMPS-b-PAaU copolymers, they can be considered promising agents against ZIKV infections.

Addressing the Osteoporosis Problem-Multifunctional Injectable Hybrid Materials for Controlling Local Bone Tissue Remodeling

Novel multifunctional biomimetic injectable hybrid systems were synthesized. The physicochemical as well as biological in vitro and in vivo tests demonstrated that they are promising candidates for bone tissue regeneration. The hybrids are composed of a biopolymeric collagen/chitosan/hyaluronic acid matrix and amine group-functionalized silica particles decorated with apatite to which the alendronate molecules were coordinated. The components of these systems were integrated and stabilized by cross-linking with genipin, a compound of natural origin. They can be precisely injected into the diseased tissue in the form of a viscous sol or a partially cross-linked hydrogel, where they can serve as scaffolds for locally controlled bone tissue regeneration/remodeling by supporting the osteoblast formation/proliferation and maintaining the optimal osteoclast level. These materials lack systemic toxicity. They can be particularly useful for the repair of small osteoporotic bone defects.

Tuning the Surface Properties of Poly(Allylamine Hydrochloride)-Based Multilayer Films

The layer-by-layer (LbL) method of polyelectrolyte multilayer (PEM) fabrication is extremely versatile. It allows using a pair of any oppositely charged polyelectrolytes. Nevertheless, it may be difficult to ascribe a particular physicochemical property of the resulting PEM to a structural or chemical feature of a single component. A solution to this problem is based on the application of a polycation and a polyanion obtained by proper modification of the same parent polymer. Polyelectrolyte multilayers (PEMs) were prepared using the LbL technique from hydrophilic and amphiphilic derivatives of poly(allylamine hydrochloride) (PAH). PAH derivatives were obtained by the substitution of amine groups in PAH with sulfonate, ammonium, and hydrophobic groups. The PEMs were stable in 1 M NaCl and showed three different modes of thickness growth: exponential, mixed exponential-linear, and linear. Their surfaces ranged from very hydrophilic to hydrophobic. Root mean square (RMS) roughness was very variable and depended on the PEM composition, sample environment (dry, wet), and the polymer constituting the topmost layer. Atomic force microscopy (AFM) imaging of the surfaces showed very different morphologies of PEMs, including very smooth, porous, and structured PEMs with micellar aggregates. Thus, by proper choice of PAH derivatives, surfaces with different physicochemical features (growth type, thickness, charge, wettability, roughness, surface morphology) were obtained.

HTCC as a Polymeric Inhibitor of SARS-CoV-2 and MERS-CoV

Among seven coronaviruses that infect humans, three (severe acute respiratory syndrome coronavirus [SARS-CoV], Middle East respiratory syndrome coronavirus [MERS-CoV], and the newly identified severe acute respiratory syndrome coronavirus 2 [SARS-CoV-2]) are associated with a severe, life-threatening respiratory infection and multiorgan failure. We previously proposed that the cationically modified chitosan N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC) is a potent inhibitor of human coronavirus NL63 (HCoV-NL63). Next, we demonstrated the broad-spectrum antiviral activity of the compound, as it inhibited all low-pathogenicity human coronaviruses (HCoV-NL63, HCoV-229E, HCoV-OC43, and HCoV-HKU1). Here, using in vitro and ex vivo models of human airway epithelia, we show that HTCC effectively blocks MERS-CoV and SARS-CoV-2 infection. We also confirmed the mechanism of action for these two viruses, showing that the polymer blocks the virus entry into the host cell by interaction with the S protein.IMPORTANCE The beginning of 2020 brought us information about the novel coronavirus emerging in China. Rapid research resulted in the characterization of the pathogen, which appeared to be a member of the SARS-like cluster, commonly seen in bats. Despite the global and local efforts, the virus escaped the health care measures and rapidly spread in China and later globally, officially causing a pandemic and global crisis in March 2020. At present, different scenarios are being written to contain the virus, but the development of novel anticoronavirals for all highly pathogenic coronaviruses remains the major challenge. Here, we describe the antiviral activity of an HTCC compound, previously developed by us, which may be used as a potential inhibitor of currently circulating highly pathogenic coronaviruses-SARS-CoV-2 and MERS-CoV.

HTCC as a Polymeric Inhibitor of SARS-CoV-2 and MERS-CoV

Among seven coronaviruses that infect humans, three (severe acute respiratory syndrome coronavirus [SARS-CoV], Middle East respiratory syndrome coronavirus [MERS-CoV], and the newly identified severe acute respiratory syndrome coronavirus 2 [SARS-CoV-2]) are associated with a severe, life-threatening respiratory infection and multiorgan failure. We previously proposed that the cationically modified chitosan N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC) is a potent inhibitor of human coronavirus NL63 (HCoV-NL63). Next, we demonstrated the broad-spectrum antiviral activity of the compound, as it inhibited all low-pathogenicity human coronaviruses (HCoV-NL63, HCoV-229E, HCoV-OC43, and HCoV-HKU1). Here, using in vitro and ex vivo models of human airway epithelia, we show that HTCC effectively blocks MERS-CoV and SARS-CoV-2 infection. We also confirmed the mechanism of action for these two viruses, showing that the polymer blocks the virus entry into the host cell by interaction with the S protein.IMPORTANCE The beginning of 2020 brought us information about the novel coronavirus emerging in China. Rapid research resulted in the characterization of the pathogen, which appeared to be a member of the SARS-like cluster, commonly seen in bats. Despite the global and local efforts, the virus escaped the health care measures and rapidly spread in China and later globally, officially causing a pandemic and global crisis in March 2020. At present, different scenarios are being written to contain the virus, but the development of novel anticoronavirals for all highly pathogenic coronaviruses remains the major challenge. Here, we describe the antiviral activity of an HTCC compound, previously developed by us, which may be used as a potential inhibitor of currently circulating highly pathogenic coronaviruses-SARS-CoV-2 and MERS-CoV.

In Vitro Inhibition of Zika Virus Replication with Poly(Sodium 4-Styrenesulfonate)

Zika virus (ZIKV) is an emerging mosquito-borne pathogen associated with microcephaly and other congenital abnormalities in newborns as well as neurologic complications in adults. The explosive transmission of the virus in the last ten years put it in the limelight and improved our understanding of its biology and pathology. Currently, no vaccine or drugs are available to prevent or treat ZIKV infections. Knowing the potential of flaviviruses to broaden their geographic distribution, as observed for the West Nile virus, it is of importance to develop novel antiviral strategies. In this work, we identified poly(sodium 4-styrenesulfonate) (PSSNa) as a new polymeric ZIKV inhibitor. We demonstrated that PSSNa inhibits ZIKV replication in vitro both in animal and human cells, while no cytotoxicity is observed. Our mechanistic studies indicated that PSSNa acts mostly through direct binding to ZIKV particle and blocking its attachment to the host cells.

Stabilization of liposomes with silicone layer improves their elastomechanical properties while not compromising biological features

The liposomes are among the most promising types of drug delivery systems but low stability significantly limits their application. Some approaches proposed to overcome this drawback may affect the liposomes toxicity profile. It is assumed that developed by us and presented here stabilization method involving formation of silicone network within the liposomal bilayer will improve elastomechanical properties of vesicles while not deteriorating their biocompatibility. The silicone-stabilized liposomes were prepared by base-catalyzed polycondensation process of the 1,3,5,7-tetramethylcyclotetrasiloxane (D₄^H) within the liposomal bilayer. The systematic biological in vitro studies of vesicles obtained were carried out. Moreover, the elastomechanical features investigation employing atomic force microscopy (AFM) measurements was performed. These properties of the liposome membrane are of great importance since they define the nanocarriers' stability as well as play a significant role in their cellular uptake via endocytosis. Applying the Derjaguin-Muller-Toporov (DMT) model, the elastic modulus of the silicone-stabilized liposomes was determined and compared to that characteristic for the pristine liposomes. The in vitro biological evaluation of silicone-stabilized liposomes demonstrated that these vesicles are not toxic for blood cells isolated from healthy donors and they do not induce oxidative stress in HepG2 cells. AFM results confirmed the stabilizing effect of silicone and revealed that the silicone network improves the elastomechanical properties of the resulted liposomes. This is the first report demonstrating that the silicone-stabilized liposomes retain biocompatibility of pristine liposomes' while acquire significantly better elastomechanical features.

Acyclovir in the Treatment of Herpes Viruses – A Review

Background:

Herpes Simplex (HSV) viruses are widely spread, highly contagious human pathogens. The statistics indicate that 50-90% of adults worldwide are seropositive for these viruses, mainly HSV-1 and HSV-2. The primary infection results in the appearance of watery blisters (cold sores) on the skin, lips, tongue, buccal mucosa or genitals. The ocular infection is the major cause of corneal blindness in the Western World. Once the HSV virus enters human body, it cannot be completely eradicated because HSV viruses are able to change into their latent form which can survive the treatment. The viron resides in trigeminal ganglia of the host, who becomes vulnerable to the reoccurrence of the disease during the whole lifespan. The neurotropic and neuro-invasive properties of HSV are responsible for neurodegenerative illnesses, such as Alzheimer's disease. Acyclovir and its analogues, being the inhibitors of the viral DNA replication, are the only approved medicines for HSV infection therapies.

Objective:

The current paper presents the up-to-date overview of the important pharmacological features of acyclovir, its analogues and their delivery systems including the mechanism of action, routes of administration, absorption and metabolism, as well as side effects of the therapy.

Conclusion:

Acyclovir remains the gold standard in the treatment of herpes virus infections, mainly due to the emerging of the new delivery systems improving considerably its bioavailability. The analogues of acyclovir, especially their esters, characterized by significantly higher bioavailability and safety, may gradually replace acyclovir in selected applications.

Berberine Hampers Influenza A Replication through Inhibition of MAPK/ERK Pathway

Background: Berberine (BBR) is an isoquinoline alkaloid which exhibits a variety of biological and therapeutic properties, and has been reported by some to block replication of the influenza virus. However, contradictory results have also been presented, and the mechanistic explanation is lacking. Methods: A panel of cell lines (Madin–Darby canine kidney (MDCK), adenocarcinoma human alveolar basal epithelial cells (A549), lung epithelial type I (LET1)) and primary human airway epithelial cells (HAE) susceptible to influenza virus infection were infected with a seasonal influenza A virus in the presence or absence of BBR. Cytotoxicity towards cell lines was measured using XTT assay. The yield of the virus was analyzed using RT-qPCR. To study the molecular mechanism of BBR, confocal microscopy and Western blot analyses of cellular fractions were applied. Results and conclusions: Our results show cell-type-dependent anti-influenza properties of BBR in vitro which suggests that the compound acts on the cell and not the virus. Importantly, BBR hampers influenza replication in primary human airway epithelium 3D cultures that mimic the natural replication site of the virus. Studies show that the influenza A virus upregulates the mitogen-activated protein kinase/extracellular signal-related kinase (MAPK/ERK) pathway and hijacks this pathway for nucleolar export of the viral ribonucleoprotein. Our results suggest that BBR interferes with this process and hampers influenza A replication.

Near-Infrared Photoactive Aza-BODIPY: Thermally Robust and Photostable Photosensitizer and Efficient Electron Donor

We report herein the synthesis of aza-BODIPY substituted with strongly electron-donating p-(diphenylamino)phenyl substituents (p-Ph₂ N-) at 3,5-positions. The presence of p-Ph₂ N- groups lowers the energy of the singlet excited state (E_s ) to 1.48 eV and induces NIR absorption with λ_abs at 789 nm in THF. The compound studied is weakly emissive with the emission band (λ_f ) at 837 nm and with the singlet lifetime (τ_S ) equal to 100 ps. Nanosecond laser photolysis experiments of the aza-BODIPY in question revealed T₁ →T_n absorption spanning from ca. 350-550 nm with the triplet lifetime (τ_T ) equal to 21 μs. By introducing a heavy atom (Br) into the structure of the aza-BODIPY, we managed to turn it into a NIR operating photosensitizer. The photosensitized oxygenation of the model compound-diphenylisobenzofuran (DPBF)-proceedes via Type I and/or Type III mechanism without formation of singlet oxygen (¹ O₂ ). As estimated by CV/DPV measurements, the p-Ph₂ N- substituted aza-BODIPYs studied exhibits oxidation processes at relatively low oxidation potentials (E_ox ¹ ), pointing to the very good electron-donating properties of these molecules. Extremely high photostability and thermal robustness up to approximately 300 °C are observed for the p-Ph₂ N- substituted aza-BODIPYs.

Heparin-Binding Copolymer as a Complete Antidote for Low-Molecular-Weight Heparins in Rats

Bleeding resulting from the application of low-molecular-weight heparins (LMWHs) may be treated with protamine sulfate, but this treatment lacks efficiency; its action against antifactor Xa activity is limited to ∼60%. Moreover, protamine sulfate can cause life-threatening hypersensitivity reactions. We developed diblock heparin-binding copolymer (HBC), which can neutralize the anticoagulant activity of parenteral anticoagulants. In the present study, we explored the safety profile of HBC and its potential to reverse enoxaparin, nadroparin, dalteparin, and tinzaparin in human plasma and at in vivo conditions. HBC-LMWH complexes were characterized using zeta potential, isothermal titration calorimetry, and dynamic light scattering. The rat cardiomyocytes and human endothelial cells were used for the assessment of in vitro toxicity. Male Wistar rats were observed for up to 4 days after HBC administration for clinical evaluation, gross necropsy, and biochemistry and histopathological analysis. Rats were treated with LMWHs alone or followed by short-time intravenous infusion of HBC, and bleeding time and antifactor Xa activity were measured. HBC completely reversed antifactor Xa activity prolonged in vitro by all LMWHs with an optimal weight ratio of 2.5:1. The complexes of HBC-LMWHs were below 5 µm. We observed no effects on the viability of cardiovascular cells treated with HBC at concentrations up to 0.05 mg/ml. Single doses up to 20 mg/kg of HBC were well tolerated by rats. HBC completely reversed the effects of LMWHs on bleeding time and antifactor Xa activity in vivo after 20 minutes and retained ∼80% and ∼60% of reversal activity after 1 and 2 hours, respectively. Well-documented efficacy and safety of HBC both in vitro and in vivo make this polymer a promising candidate for LMWHs reversal. SIGNIFICANCE STATEMENT: Over the last decade, there has been significant progress in developing antidotes for the reversal of anticoagulants. Until now, there has been no effective and safe treatment for patients with severe bleeding under low-molecular-weight heparin therapy. Based on our in vitro and in vivo studies, heparin-binding copolymer seems to be a promising candidate for neutralizing all clinically relevant low-molecular-weight heparins.

Bioactive yet antimicrobial structurally stable collagen/chitosan/lysine functionalized hyaluronic acid - based injectable hydrogels for potential bone tissue engineering applications

Novel, biocompatible, multifunctional, injectable genipin crosslinked collagen/chitosan/lysine-modified hyaluronic acid based hydrogels (ColChHA_mod) were prepared in a facile, one-step procedure. The novelty of the current approach lies in the functionalization of hyaluronic acid (HA) with primary amine groups by lysine attachment, and its further use as a component of the injectable sol. The obtained derivative, HA_mod, could form, upon crosslinking with genipin, covalent bonds with other components of the hydrogel network, resulting in structurally stable, better-defined hydrogels. We have demonstrated that, by adjusting HA_mod content and genipin concentration, hydrogels with tunable physicochemical characteristics (swelling, wettability, tendency for enzymatic degradation) and properties adequate for the potential bone tissue regeneration can be prepared. Storage modulus measurements indicated that HA_mod has positive effect on mechanical characteristics of hydrogels prepared. It was also revealed that the ColChHA_mod-based hydrogels are characterized by a high porosity (85-95%). The in situ rheological measurements confirmed the injectability of the obtained hydrogels. The in vitro cell culture studies showed that the surface of all materials prepared was biocompatible, as they supported proliferation and adhesion of osteoblast-like cells followed by ALP expression. The intrinsic antibacterial activity of the hydrogels against Escherichia coli was also demonstrated in in vitro experiment.

New long-term action insulin formulations obtained using polycations for heparin neutralization

Phenomena that occur between an insulin and four different positively charged polymers (protamine, cationic dextran, chitosan, and poliallylamine derivatives) were studied by dynamic light scattering and fluorescence measurements (using fluorescein-labeled polymers). These processes were compared to the reaction of polycations with heparin that is responsible for the neutralization of anticoagulant activity in blood stream.The nature of polycations interaction with heparin is electrostatic, while the interaction with insulin is more complicated.We observed that the presence of zinc atoms (and its complexing by nitrogen from macromolecules) is critical for insulin suspensions formation and stability. The differences between the nature of these two reactions were revealed. The highly immunogenic action of protamine present in long-acting insulin products makes it reasonable to develop similar systems based on the nonprotein polycations.

Highly Effective and Safe Polymeric Inhibitors of Herpes Simplex Virus in Vitro and in Vivo

A series of poly(ethylene glycol)-block-poly(3-(methacryloylamino)propyl trimethylammonium chloride) (PEG-b-PMAPTAC) water-soluble block copolymers consisting of PEG and PMPTAC were obtained by reversible addition-fragmentation chain-transfer (RAFT) polymerization and demonstrated to function as highly effective herpes simplex virus type 1 (HSV-1) inhibitors as shown by in vitro tests (Vero E6 cells) and in vivo experiments (mouse model). Half-maximal inhibitory concentration (IC₅₀) values were determined by quantitative polymerase chain reaction to be 0.36 ± 0.08 μg/mL for the most effective polymer PEG₄₅-b-PMAPTAC₅₂ and 0.84 ± 1.24 μg/mL for the less effective one, PEG₄₅-b-PMAPTAC₇₄. The study performed on the mouse model showed that the polymers protect mice from lethal infection. The polymers are not toxic to the primary human skin fibroblast cells up to the concentration of 100 μg/mL and to the Vero E6 cells up to 500 μg/mL. No systemic or topical toxicity was observed in vivo, even with mice treated with concentrated formulation (100 mg/mL). The mechanistic studies indicated that polymers interacted with the cell and blocked the formation of the entry/fusion complex. Physicochemical and biological properties of PEG_x-b-PMAPTAC_y make them promising drug candidates.

Cat flu: Broad spectrum polymeric antivirals

Feline herpesvirus type 1 (FHV-1) and feline calicivirus (FCV) are considered as main causes of feline upper respiratory tract disease and the most common clinical manifestations include rhinotracheitis, conjunctivitis, and nasal/facial ulcerations. While the primary infection is relatively mild, secondary infections pose a threat to young or immunocompromised cats and may result in a fatal outcome. In this study, we made an effort to evaluate antiviral potency of poly(sodium 4-styrenesulfonates) (PSSNa) as potent FHV-1 and FCV inhibitors for topical use. Mechanistic studies showed that PSSNa exhibits a different mechanism of action depending on target species. While PSSNa acts directly on FHV-1 particles blocking their interaction with the host's cell and preventing the infection, the antiviral potency against FCV is based on inhibition at late stages of the viral replication cycle. Altogether, PSSNa polymers are promising drug candidates to be used in the treatment and prevention of the viral upper respiratory tract disease (URTD), regardless of the cause.

Genipin crosslinked bioactive collagen/chitosan/hyaluronic acid injectable hydrogels structurally amended via covalent attachment of surface-modified silica particles

Collagen, chitosan and hyaluronic acid based multicomponent injectable and in situ gellating biomimetic hybrid materials for bone tissue engineering applications were prepared in one-step procedure. The bioactive phase in the form of surface-modified silica particles was introduced to the solutions of biopolymers and simultaneously crosslinked with genipin both the biopolymer matrix and dispersed particles at 37 °C. The novel approach presented here involved the use of silica particles which surfaces were priory functionalized with amino groups. That modification makes possible the covalent attachment of silica particles to the polymeric hydrogel network on crosslinking with genipin. That methodology is especially important as it makes possible to obtain the hybrid materials (biopolymer-silica particles) in which the problems related to the potential phase separation of mineral particles, hindering their in vivo application can be eliminated. The hybrids of various compositions were obtained and their physicochemical and biological properties were determined. The in vitro experiments performed under simulated body fluid conditions revealed that the amino-functionalized silica particles covalently attached to the biopolymeric network are still bioactive. Finally, the in vitro cell culture studies shown that the materials developed are biocompatible as they supported MG-63 cells adhesion, proliferation as well as Alkaline phosphatase (ALP) expression.

The antiatherogenic effect of new biocompatible cationically modified polysaccharides: chitosan and pullulan - the comparison study

Pullulan and chitosan are biocompatible polysaccharides obtained from natural sources with many biomedical applications. Cationically modified polymers, such as chitosan and pullulan after covalent attachment of glycidyltrimethylammonium chloride (GTMAC), showed beneficial biological properties. In the present study, it was clearly demonstrated and confirmed that both cationically modified polysaccharides (chitosan-GTMAC and pullulan-GTMAC) have the antiatherosclerotic potential by inhibition of atherosclerotic plaque development and controlling the expression of genes involved in lipid metabolism. It has also been shown that the cationically modified chitosan (HTCC) at a dose of 200 mg/kg b.w./day in male apoE-knockout mice acted as hypolipidaemic agent. It was observed that a statistically significant decrease in low-density lipoprotein (LDL) cholesterol level by 32% occurred under the influence of HTCC at a dose of 200 mg/kg b.w./day after 16 weeks of the experiment compared to the control group of apoE(-/-) mice. Moreover, under the influence of cationically modified chitosan administered orally to female apoE-knockout mice at a dose of 300 mg/kg b.w./day for 18 weeks a statistically significant reduction by 33% in the area of atherosclerotic plaque was observed compared to the control group, i.e., apoE-knockout mice whose diet was not supplemented with the cationically modified polysaccharide. Current in vivo studies connected with cationically modified pullulan showed a statistically significant 22% reduction of the area of atherosclerotic plaque in the apoE(-/-) mice fed with a feed containing Pull-GTMAC at a dose of 500 mg/kg b.w./day for 18 weeks in comparison to the control group of apoE-knockout mice. In the in vitro studies it was also shown that cationically modified chitosan acted therapeutically by reduction of the level of the expression of human 3-hydroxy-3-methylglutaryl-CoA reductase (human HMG-CoAR) after 24 hours of incubation with HepG2 cells. However, cationically modified pullulan did not show this effect in the experiment on HepG2 cell line. On the other hand, Pull-GTMAC caused a statistically significant increase in insulin induced gene 1 (INSIG1) expression and increase in mRNA level of LDL receptor in brown fat tissue of female apoE-knockout mice after oral administration with feed at a dose of 300 mg/kg b.w./day for 18 weeks in comparison to the control group of apoE(-/-) mice, that was crearly demonstrated the effect of cationically modified pullulan on the expression of lipid metabolism genes in in vivo conditions. In the present article we have shown for first time that cationically modified pullulan and chitosan have some similarities in their antiatherogenic action but there are also some minor differences in mechanism of their effect on lipid metabolism.

Comparison of Effects of Anti-thrombin Aptamers HD1 and HD22 on Aggregation of Human Platelets, Thrombin Generation, Fibrin Formation, and Thrombus Formation Under Flow Conditions

HD1 and HD22 are two of the most-studied aptamers binding to thrombin exosite I and exosite, respectively. To complete of their pharmacological profiles, the effects of HD1 and HD22 on thrombin-, ristocetin-, and collagen-induced human platelet aggregation, on thrombin generation and fibrin formation in human plasma, as well as on thrombus formation in human whole blood under flow conditions were assessed. The dissociation constants for HD1 and HD22 complexes with thrombin in simulated plasma ionic buffer were also evaluated. HD1 was more potent than HD22 in terms of inhibiting thrombin-induced platelet aggregation in platelet-rich plasma (PRP; 0.05-3 μM) and in washed platelets (WPs; 0.005-3 μM): approximately 8.31% (±6.99% SD) and 89.53% (±11.38% SD) for HD1 (0.5 μM) and HD22 (0.5 μM), respectively. Neither HD1 nor HD22 (3 μM) did influence platelets aggregation induced by collagen. Both of them inhibited ristocetin-induced aggregation in PRP. Surprisingly, HD1 and HD22 aptamers (3 μM) potentiated ristocetin-induced platelet aggregation in WP. HD1 reduced thrombin generation in a concentration-dependent manner [ETP at 3 μM: 1677.53 ± 55.77 (nM⋅min) vs. control 2271.71 ± 423.66 (nM⋅min)], inhibited fibrin formation (lag time at 3 μM: 33.70 min ± 8.01 min vs. control 7.91 min ± 0.91 min) and reduced thrombus formation under flow conditions [AUC₃₀ at 3 μM: 758.30 ± 344.23 (kPa⋅min) vs. control 1553.84 ± 118.03 (kPa⋅min)]. HD22 (3 μM) also delayed thrombin generation but increased the thrombin peak. HD22 (3 μM) shortened the lag time of fibrin generation (5.40 min ± 0.26 min vs. control 7.58 min ± 1.14 min) but did not modify thrombus formation (3, 15 μM). K _d values for the HD1 complex with thrombin was higher (257.8 ± 15.0 nM) than the K _d for HD22 (97.6 ± 2.2 nM). In conclusion, HD1 but not HD22 represents a potent anti-thrombotic agent, confirming the major role of exosite I in the action of thrombin. HD22 aptamer blocking exosite II displays weaker anti-platelet and anti-coagulant activity, with surprising activating effects on thrombin and fibrin generation most likely induced by HD22-induced allosteric changes in thrombin dynamic structure.

The neutralization of heparan sulfate by heparin-binding copolymer as a potential therapeutic target

Besides regulating ligand–receptor and cell–cell interactions, heparan sulfate (HS) may participate in the development of many diseases, such as cancer, bacterial or viral infections, and their complications, like bleeding or inflammation. In these cases, the neutralization of HS could be a potential therapeutic target. The heparin-binding copolymer (HBC, PEG41-PMAPTAC53) was previously reported by us as a fully synthetic compound for efficient and safe neutralization of heparins and synthetic anticoagulants. In a search for molecular antagonists of HS, we examined the activity of HBC as an HS inhibitor both in vitro and in vivo and characterized HBC/HS complexes. Using a colorimetric Azure A method, isothermal titration calorimetry and dynamic light scattering techniques we found that HBC binds HS by forming complexes below 200 nm with less than 1 : 1 stoichiometry. We confirmed the HBC inhibitory effect in rats by measuring activated partial thromboplastin time, prothrombin time, anti-factor Xa activity, anti-factor IIa activity, and platelet aggregation. HBC reversed the enhancement of all tested parameters caused by HS demonstrating that cationic synthetic block copolymers may have a therapeutic value in various disorders involving overproduction of HS.

The neutralization of heparan sulfate (HS) by a heparin-binding copolymer (HBC) could be a promising treating option for bacterial or viral infections or bleeding related to overproduction of HS in cancer or other diseases.

Molecular Mechanism of Polycation-Induced Pore Formation in Biomembranes

Polycations are an attractive class of macromolecules with promising applications as drug/gene carriers and biocides. The chemical structure and concentration of a polycation determine its interaction with cellular membranes and, hence, are crucial parameters for designing efficient nontoxic polycations. However, the interaction of polycations with biomembranes at the molecular level and the corresponding free-energy landscape is not well understood. In this work, we investigate the molecular mechanism of interaction between a strong polycation substituted with alkyl moieties and zwitterionic membranes via long-time-scale all-atom molecular dynamics simulations and free-energy calculations combined with Langmuir monolayer, atomic force microscopy, and calcein-release experimental measurements. We found that the membrane activity of the polycation and its ability to induce pores in the membranes can be attributed to the polycation-induced changes in the bilayer organization, such as reduced membrane thickness, increased disorder of the acyl chains, reduced packing, and electrostatic field gradients between membrane leaflets. These changes facilitate the penetration of water into the membrane and the formation of aqueous defects/pores. The calculated free-energy profiles indicate that the polycation lowers the nucleation barrier for pore opening and the free energy for pore formation in a concentration-dependent manner. Above the critical coverage of the membrane, the polycation nucleates spontaneous pores in zwitterionic membranes. Our work demonstrates the potential of combining enhanced sampling methods in MD simulations with experiments for a quantitative description of various events in the polycation-membrane interaction cycle, such as strong adsorption on the membrane due to hydrophobic and electrostatic interactions, and pore formation.

Cell proliferation induced by modified cationic dextran

The interaction between oppositely charged membranes and polycations causes cell aggregation, loss of membrane fluidity, and membrane degeneration and may cause an increase of its permeability. Unfortunately, the interaction is the reason why the use of polycations in medicine is severely limited. Therefore, in this paper, we share our observations related to the action of 40-kDa dextran modified using glycidyltrimethylammonium chloride, resulting in increased fibroblast cell proliferation. Using viability and proliferation tests [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide, crystal violet, 3H-thymidine incorporation], we have observed that cationic dextran derivatives exert a positive impact on nonepithelial cell proliferation in vitro. This phenomenon has been noted for human and mouse fibroblasts and several other nonepithelial cell lines. However, the effect seems to be most pronounced for fibroblast cell lines. The presented studies allow to examine the impact of the polymer structure and the methods of its cationic modification on this newly observed phenomenon. The observation is unique because positively charged macromolecules usually exhibit high toxicity in all cell types in vitro.

Molecular Insight into Drug-Loading Capacity of PEG-PLGA Nanoparticles for Itraconazole

Nanoparticles made of amphiphilic block copolymers comprising biodegradable core-forming blocks are very attractive for the preparation of drug-delivery systems with sustained release. Their therapeutic applications are, however, hindered by low values of the drug-loading content (DLC). The compatibility between the drug and the core-forming block of the copolymer is considered the most important factor affecting the DLC value. However, the molecular picture of the hydrophobic drug-copolymer interaction is still not fully recognized. Herein, we examined this complex issue using a range of experimental techniques in combination with atomistic molecular dynamics simulations. We performed an analysis of the interaction between itraconazole, a model hydrophobic drug, and a poly(ethylene glycol)-poly(lactide- co-glycolide) (PEG-PLGA) copolymer, a biodegradable copolymer commonly used for the preparation of drug-delivery systems. Our results clearly show that the limited capacity of the PEG-PLGA nanoparticles for the accumulation of hydrophobic drugs is due to the fact that the drug molecules are located only at the water-polymer interface, whereas the interior of the PLGA core remains empty. These findings can be useful in the rational design and development of amphiphilic copolymer-based drug-delivery systems.

Tuning of elasticity and surface properties of hydrogel cell culture substrates by simple chemical approach

When designing materials for tissue engineering applications various parameters characterizing both materials and tissue have to be taken into account. The characteristics such as chemistry, elasticity, wettability, roughness and morphology of the substrate's surface have significant impact on cell behavior. The paper presents biopolymer (collagen/chitosan) based hydrogel materials with tunable elasticity and surface properties useful for fabrication of substrates for cell culture. Using simple chemical approach involving the change in concentration of crosslinking agent (genipin) and composition of the reaction mixture the hydrogels characterized with various features were obtained. Detailed analysis of morphology, topography, roughness and elasticity of surface performed using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and rheological measurements has shown that the topographical aspects and roughness parameter can be modulated in nanoscale regime (13-47 nm). Substrate's elasticity could be modified in a wide range (0.2-270 kPa). Biological in vitro studies on fibroblasts behavior revealed that the materials prepared provide satisfactory conditions for cell culture, ensuring their high viability, good adhesion and normal morphology. The genipin crosslinked collagen-chitosan hydrogels characterized by denser fiber structure, higher elasticity and lower surface roughness are the most attractive supports for fibroblasts cultivation. The results obtained indicate that the properties of the materials developed can be easily tailored to the needs of the given type of cells.

Visible-Light Photoactive, Highly Efficient Triplet Sensitizers Based on Iodinated Aza-BODIPYs: Synthesis, Photophysics and Redox Properties

A series of novel iodinated NO₂ -substituted aza-BODIPYs have been synthesized and characterized. Highly desirable photophysical and photochemical properties were induced in NO₂ -substituted aza-BODIPYs by iodination of the pyrrole rings. In particular, high values of singlet oxygen quantum yields (Φ_Δ ) ranging from 0.79 to 0.85 were measured. The photooxygenation process proceeds via a Type II mechanism under the experimental conditions applied. The compounds studied exhibited an absorption band within the so-called "therapeutic window", with λ_max located between 645 nm to 672 nm. They were non-fluorescent at room temperature with excited singlet-state lifetimes within the picosecond range as measured by femtosecond transient absorption. Nanosecond laser flash photolysis experiments revealed T₁ →T_n absorption spanning from ca. 400 nm to ca. 500 nm and allowed determination of the triplet-state lifetimes. The estimated triplet lifetimes (τ_T ) in deaerated acetonitrile ranged between 2.74 μs and 3.50 μs. As estimated by CV/DPV measurements, all iodinated aza-BODIPYs studied exhibited one irreversible oxidation and two quasi-reversible reductions processes. Estimation of the E_HOMO gave the value of -6.06 to -6.26 eV while the E_LUMO was found to be located at ca. -4.6 eV. Thermogravimetric (TGA) analysis revealed that iodinated aza-BODIPYs were stable up to approximately 300 °C. All compounds studied exhibit high photostability in toluene solution.

Uptake and bioreactivity of charged chitosan-coated superparamagnetic nanoparticles as promising contrast agents for magnetic resonance imaging

Bioreactivity of superparamagnetic iron oxide nanoparticles (SPION) coated with thin layers of either cationic or anionic chitosan derivatives and serving as contrast agents in magnetic resonance imaging (MRI) was studied in vivo using BALB/c mouse model. Synthesized dual-modal fluorescing SPION were tracked in time using both fluorescent imaging and MRI. Although SPION started to be excreted by kidneys relatively shortly after administration they were uptaken by liver enhancing MRI contrast even up to 7 days. Importantly, chitosan-coated SPION caused only mild activation of acute phase response not affecting biochemical parameters of blood. Liver histology indicated the presence of SPION and modest increase in the number of Kupffer cells. The overall results indicated that SPION coated with ultrathin layers of chitosan ionic derivatives can serve as T₂ contrast agents for diagnosis of liver diseases or imaging of other organs assuming the dose is optimized according to the need.