Surface and anti-fouling properties of a polyampholyte hydrogel grafted onto a polyethersulfone membrane

Metallo-Polyampholyte Hydrogel Based on a Y-Shaped Amphoteric Monomer with Robust Antibacterial and Antifouling Performance

A Y-shaped metallo-amphoteric monomer with cobaltocenium as the cation and sulfonyl as the anion was synthesized and used to prepare the corresponding metallo-polyampholyte hydrogel (PAH). The cobaltocenium in the amphoteric system and its Y-shape may introduce tunable supramolecular interactions, providing regulation of hydration properties and biomedical performance. Such metallo-PAH showed a higher water swelling ratio and comparable mechanical performance in comparison with its organic counterpart, polysulfobetaine methacrylate hydrogel (SBMA-PAH). Moreover, the metallo-PAH showed a good inhibitory effect against Gram-negative bacteria, Gram-positive bacteria, as well as corresponding drug-resistant bacteria. Interestingly, it was found that the metallo-PAH achieved as high as 95% antifouling property against different proteins in both short-term (2 h) and long-term (24 h) tests, which is much better than that of the SBMA-PAH (<50%). It is believed that the concept of "metallo-polyampholyte" may expand the field of classical polyampholytes and related materials, thus opening up a new avenue to design powerful antifouling materials.

Preparation of Nonfouling Zwitterionic Coatings by Plasma-Enhanced Chemical Vapor Deposition under Ambient Pressure

Nonspecific protein adsorption significantly impacts the performance of biomedical devices in both hemocompatibility and tissue compatibility. Polyzwitterionic coatings are a promising solution. However, conventional zwitterionic coatings always have to rely on sophisticated wet chemistry methods, leading to low controllability and high cost. In this work, zwitterionic coatings were prepared by nitrogen plasma-enhanced chemical vapor deposition (PECVD) of precursors for 90 s under ambient pressure followed by hydrolysis. The results showed that the PECVD-coated thermoplastic polyurethane (TPU), Tecoflex, effectively resists nonspecific protein adsorption, platelet adhesion, and bacterial adhesion without changing the mechanic properties of TPU. This approach simplified the zwitterionic coating process with highly controllability, showing a promising potential for the surface modification of biomedical devices.

Hydrophobic fouling-resistant electrospun nanofiber membranes from poly(vinylidene fluoride)/polyampholyte blends

This study reports the fabrication of non-woven fibrous membranes from electrospinning blended solutions of PVDF with polyampholytes in N,N-dimethylformamide and methanol. Polyampholytes are macromolecules that have both positive and negative charged units in different side groups attached to the backbone. In this study, we used a random polyampholyte amphiphilic copolymer (r-PAC) synthesized by co-polymerizing a hydrophobic monomer in addition to the positive and negative charged monomer units, to reduce the fouling propensity of PVDF electrospun membranes while preserving its inherent hydrophobicity. Blends of PVDF/r-PAC were electrospun across the full range of compositions from 0/100 to 100/0. Scanning electron microscopic analysis showed formation of beaded fibers with average fibril diameters from 0.09-0.18 μm. The variation in the fiber diameters is caused by the change in surface charge density, dynamic viscosity of the solution, and the instability of the Taylor cone. Bead formation was observed in the mats electrospun from less viscous solutions. Wide angle X-ray scattering showed that electrospun fibers of PVDF crystallized into the electro-active β and γ crystal phases, whereas polyampholytes were amorphous. Thermogravimetry showed that the PVDF/r-PAC blends have a multi-step thermal degradation mechanism while PVDF homopolymer showed single-step thermal degradation. Sessile drop contact angle measurements confirmed that fibers possess high hydrophobicity and super-oleophilicity. Adsorptive fouling experiments with a fluorescently labeled protein confirmed that the fiber mats obtained from the PVDF/r-PAC blends resist protein adsorption, exhibiting highly enhanced fouling resistance compared to the fibers obtained from homopolymer PVDF.

Amphiphilic Polyelectrolyte Complexes for Fouling-Resistant and Easily Tunable Membranes

Commercial membranes today are manufactured from a handful of membrane materials. While these systems are well-optimized, their capabilities remain constrained by limited chemistries and manufacturing methods available. As a result, membranes cannot address many relevant separations where precise selectivity is needed, especially with complex feeds. This constraint requires the development of novel membrane materials that offer customizable features to provide specific selectivity and durability requirements for each application, enabled by incorporating different functional chemistries into confined nanopores in a scalable process. This study introduces a new class of membrane materials, amphiphilic polyelectrolyte complexes (APECs), comprised of a blend two distinct amphiphilic polyelectrolytes of opposite charge that self-assemble to form a polymer selective layer. When coated on a porous support from a mixture in a nonaqueous solvent, APECs self-assemble to create ionic nanodomains acting as water-conducting nanochannels, enveloped within hydrophobic nanodomains, ensuring structural integrity of the layer in water. Notably, this approach allows precise control over selectivity without compromising pore size, permeability, or fouling resistance. For example, using only one pair of amphiphilic copolymers, sodium sulfate rejections can be varied from >95% to <10% with no change in effective pore size and fouling resistance. Given the wide range of amphiphilic polyelectrolytes (i.e., combinations of different hydrophobic, anionic, and cationic monomers), APECs can create membranes with many diverse chemistries and selectivities. Resultant membranes can potentially address precision separations in many applications, from wastewater treatment to chemical and biological manufacturing.

Pseudo-bottle-brush decorated thin-film composite desalination membranes with ultrahigh mineral scale resistance

High water recovery is crucial to inland desalination but is impeded by mineral scaling of the membrane. This work presents a two-step modification approach for grafting high-density zwitterionic pseudo-bottle-brushes to polyamide reverse osmosis membranes to prevent scaling during high-recovery desalination of brackish water. Increasing brush density, induced by increasing reaction time, correlated with reduced scaling. High-density grafting eliminated gypsum scaling and almost completely prevented silica scaling during desalination of synthetic brackish water at a recovery ratio of 80%. Moreover, scaling was effectively mitigated during long-term desalination of real brackish water at a recovery ratio of 90% without pretreatment or antiscalants. Molecular dynamics simulations reveal the critical dependence of the membrane's silica antiscaling ability on the degree to which the coating screens the membrane surface from readily forming silica aggregates. This finding highlights the importance of maximizing grafting density for optimal performance and advanced antiscaling properties to allow high-recovery desalination of complex salt solutions.

Advances in Membrane Separation for Biomaterial Dewatering

Biomaterials often contain large quantities of water (50-98%), and with the current transition to a more biobased economy, drying these materials will become increasingly important. Contrary to the standard, thermodynamically inefficient chemical and thermal drying methods, dewatering by membrane separation will provide a sustainable and efficient alternative. However, biomaterials can easily foul membrane surfaces, which is detrimental to the performance of current membrane separations. Improving the antifouling properties of such membranes is a key challenge. Other recent research has been dedicated to enhancing the permeate flux and selectivity. In this review, we present a comprehensive overview of the design requirements for and recent advances in dewatering of biomaterials using membranes. These recent developments offer a viable solution to the challenges of fouling and suboptimal performances. We focus on two emerging development strategies, which are the use of electric-field-assisted dewatering and surface functionalizations, in particular with hydrogels. Our overview concludes with a critical mention of the remaining challenges and possible research directions within these subfields.

New Insights on Biological Activities, Chemical Compositions, and Classifications of Marine Actinomycetes Antifouling Agents

Biofouling is the assemblage of undesirable biological materials and macro-organisms (barnacles, mussels, etc.) on submerged surfaces, which has unfavorable impacts on the economy and maritime environments. Recently, research efforts have focused on isolating natural, eco-friendly antifouling agents to counteract the toxicities of synthetic antifouling agents. Marine actinomycetes produce a multitude of active metabolites, some of which acquire antifouling properties. These antifouling compounds have chemical structures that fall under the terpenoids, polyketides, furanones, and alkaloids chemical groups. These compounds demonstrate eminent antimicrobial vigor associated with antiquorum sensing and antibiofilm potentialities against both Gram-positive and -negative bacteria. They have also constrained larval settlements and the acetylcholinesterase enzyme, suggesting a strong anti-macrofouling activity. Despite their promising in vitro and in vivo biological activities, scaled-up production of natural antifouling agents retrieved from marine actinomycetes remains inapplicable and challenging. This might be attributed to their relatively low yield, the unreliability of in vitro tests, and the need for optimization before scaled-up manufacturing. This review will focus on some of the most recent marine actinomycete-derived antifouling agents, featuring their biological activities and chemical varieties after providing a quick overview of the disadvantages of fouling and commercially available synthetic antifouling agents. It will also offer different prospects of optimizations and analysis to scale up their industrial manufacturing for potential usage as antifouling coatings and antimicrobial and therapeutic agents.

Amphiphilic Polyampholytes for Fouling-Resistant and Easily Tunable Membranes

The versatility of membranes is limited by the narrow range of material chemistries on the market, which cannot address many relevant separations. Expanding their use requires new membrane materials that can be tuned to address separations by providing the desired selectivity and robustness. Self-assembly is a versatile and scalable approach to create tunable membranes with a narrow pore size distribution. This study reports the first examples of a new class of membrane materials that derives state-of-the-art permeability, selectivity, and fouling resistance from the self-assembly of random polyampholyte amphiphilic copolymers. These membranes feature a network of ionic nanodomains that serve as nanochannels for water permeation, framed by hydrophobic nanodomains that preserve their structural integrity. This copolymer design approach enables precise selectivity control. For example, sodium sulfate rejections can be tuned from 5% to 93% with no significant change in the pore size or fouling resistance. Membranes developed here have potential applications in wastewater treatment and chemical separations.

Microporous Polyethersulfone Membranes Grafted with Zwitterionic Polymer Brushes Showing Microfiltration Permeance and Ultrafiltration Bacteriophage Removal

Virus removal from water using microfiltration (MF) membranes is of great interest but remains challenging owing to the membranes' mean pore sizes typically being significantly larger than most viruses. We present microporous membranes grafted with polyzwitterionic brushes (N-dimethylammonium betaine) that combine bacteriophage removal in the range of ultrafiltration (UF) membranes with the permeance of MF membranes. Brush structures were grafted in two steps: free-radical polymerization followed by atom transfer radical polymerization (ATRP). Attenuated total reflection Fourier transform infrared (ATR-FTIR) and X-ray photoelectron (XPS) verified that grafting occurred at both sides of the membranes and that the grafting increased with increasing the zwitterion monomer concentration. The log reduction values (LRVs) of the pristine membrane increased from less than 0.5 LRV for T4 (∼100 nm) and NT1 (∼50 nm) bacteriophages to up to 4.5 LRV for the T4 and 3.1 LRV for the NT1 for the brush-grafted membranes with a permeance of about 1000 LMH/bar. The high permeance was attributed to a high-water fraction in the ultra-hydrophilic brush structure. The high measured LRVs of the brush-grafted membranes were attributed to enhanced bacteriophages exclusion from the membrane surface and entrapment of the ones that penetrated the pores due to the membranes' smaller mean pore-size and cross-section porosity than those of the pristine membrane, as seen by scanning electron microscopy (SEM) and measured using liquid-liquid porometry. Micro X-ray fluorescence (μ-XRF) spectrometry and nanoscale secondary ion mass spectrometry showed that 100 nm Si-coated gold nanospheres accumulated on the surface of the pristine membrane but not on the brush-coated membrane and that the nanospheres that penetrated the membranes were entrapped in the brush-grafted membrane but passed the pristine one. These results corroborate the LRVs obtained during filtration experiments and support the inference that the increased removal was due to a combined exclusion mechanism and entrapment. Overall, these microporous brush-grafted membranes show potential for use in advanced water treatment.

Recent Advancements in the Recovery and Reuse of Organic Solvents Using Novel Nanomaterial-Based Membranes for Renewable Energy Applications

The energy crisis in the world is increasing rapidly owing to the shortage of fossil fuel reserves. Climate change and an increase in global warming necessitates a change in focus from petroleum-based fuels to renewable fuels such as biofuels. The remodeling of existing separation processes using various nanomaterials is of a growing interest to industrial separation methods. Recently, the design of membrane technologies has been the most focused research area concerning fermentation broth to enhance performance efficiency, while recovering those byproducts to be used as value added fuels. Specifically, the use of novel nano material membranes, which brings about a selective permeation of the byproducts, such as organic solvent, from the fermentation broth, positively affects the fermentation kinetics by eliminating the issue of product inhibition. In this review, which and how membrane-based technologies using novel materials can improve the separation performance of organic solvents is considered. In particular, technical approaches suggested in previous studies are discussed with the goal of emphasizing benefits and problems faced in order to direct research towards an optimized membrane separation performance for renewable fuel production on a commercial scale.

Thermo-Responsive Hydrophilic Support for Polyamide Thin-Film Composite Membranes with Competitive Nanofiltration Performance

Poly(N-isopropylacrylamide) (PNIPAAm) was introduced into a polyethylene terephthalate (PET) nonwoven fabric to develop novel support for polyamide (PA) thin-film composite (TFC) membranes without using a microporous support layer. First, temperature-responsive PNIPAAm hydrogel was prepared by reactive pore-filling to adjust the pore size of non-woven fabric, creating hydrophilic support. The developed PET-based support was then used to fabricate PA TFC membranes via interfacial polymerization. SEM–EDX and AFM results confirmed the successful fabrication of hydrogel-integrated non-woven fabric and PA TFC membranes. The newly developed PA TFC membrane demonstrated an average water permeability of 1 L/m² h bar, and an NaCl rejection of 47.0% at a low operating pressure of 1 bar. The thermo-responsive property of the prepared membrane was studied by measuring the water contact angle (WCA) below and above the lower critical solution temperature (LCST) of the PNIPAAm hydrogel. Results proved the thermo-responsive behavior of the prepared hydrogel-filled PET-supported PA TFC membrane and the ability to tune the membrane flux by changing the operating temperature was confirmed. Overall, this study provides a novel method to fabricate TFC membranes and helps to better understand the influence of the support layer on the separation performance of TFC membranes.

Biofilm Formation and Biofouling Development on Different Ultrafiltration Membranes by Natural Anaerobes from an Anaerobic Membrane Bioreactor

Biofouling in anaerobic membrane bioreactors (AnMBRs) has not been studied widely. Moreover, the effect of membrane surface properties on biofilm formation beyond initial deposition is controversial. We investigated biofouling with polyvinyldifluoride, polyacrylonitrile, and zwitterion-modified polyethersulfone ultrafiltration membranes having different properties during 72 h filtration using natural anaerobes isolated from AnMBR and analyzed biofilm characteristics by physicochemical and molecular techniques. A decrease in membrane performance was positively correlated with biofilm formation on polyvinyldifluoride and polyacrylonitrile membranes, and as expected, physical cleaning effectively mitigated biofilm on hydrophilic and low-roughness membranes. Surprisingly, while the biofilm on the hydrophilic and low-surface roughness zwitterion-modified membrane was significantly impaired, the impact on transmembrane pressure was the highest. This was ascribed to the formation of a soft compressible thin biofilm with high hydraulic resistance, and internal clogging and pore blocking due to high pore-size distribution. Anaerobe community analysis demonstrated some selection between the bulk and biofilm anaerobes and differences in the relative abundance of the dominant anaerobes among the membranes. However, correlation analyses revealed that all membrane properties studied affected microbial communities' composition, highlighting the system's complexity. Overall, our findings indicate that the membrane properties can affect biofilm formation and the anaerobic microbial population but not necessarily alleviate biofouling.

Highly Tough, Stretchable and Self-Healing Polyampholyte Elastomers with Dual Adhesiveness

A new type of polyampholyte with unique viscoelastic properties can be easily synthesized by the copolymerization of butyl acrylate with dimethylaminoethyl methacrylate and acid acrylate in one pot. The elastic modulus of the as-prepared polyampholyte can be easily tuned by adjusting the ratio between the butyl acrylate and ionic monomers. The polyampholyte synthesized by a low proportion of ionic monomer showed low tensile strength and high stretchability, resulting in good conformal compliance with the biological tissues and potent energy dissipation. Due to the existence of high-intensity reversible ionic bonds in the polymer matrix, excellent self-recovery and self-healing properties were achieved on the as-prepared polyampholytes. By combining the high Coulombic interaction and interfacial energy dissipation, tough adhesiveness was obtained for the polyampholyte on various substrates. This new type of polyampholyte may have important applications in adhesives, packaging and tissue engineering.

Zwitterionic hydrogel modified reduced graphene oxide/ZnO nanocomposite blended membrane with high antifouling and antibiofouling performances

Membrane fouling and biofouling are major challenges in the application of membrane technology for wastewater treatment. The synthesis of antifouling and antibiofouling dual functionality membranes is a promising approach to tackling these problems. In this work, we fabricated a high-efficiency dual functionality polyethersulfone (PES) ultrafiltration membrane by blending an antibacterial reduced graphene oxide-ZnO nanocomposite into a PES matrix (rGO/ZnO-PES) followed by surface grafting of a low-fouling polyampholyte hydrogel (rGO/ZnO-z-PES). The antibacterial activity of the blended membrane was optimized by changing the nanocomposite fraction in the PES dope solution. Surface characterizations (SEM-EDS, XPS, ATR-FTIR, contact angle, and Zeta potential) confirmed the successful grafting of the zwitterionic hydrogel on the rGO/ZnO-PES membrane surface. Contact killing assays revealed that the polyampholyte hydrogel grafting did not affect the high antibacterial activity of the rGO/ZnO-PES membrane. Dynamic filtration experiments demonstrated the very high antifouling and antibiofouling of the rGO/ZnO-z-PES membrane, and significantly higher than those of the rGO/ZnO-PES and pristine PES membranes. The measured concentration of zinc ions in the permeate was low. Overall, our results demonstrate that the rGO/ZnO-z-PES membrane has excellent antifouling and antibiofouling performance and is stable and safe, and therefore very promising for wastewater treatment.

Hemodialysis biocompatibility mathematical models to predict the inflammatory biomarkers released in dialysis patients based on hemodialysis membrane characteristics and clinical practices

Chronic kidney disease affects millions of people around the globe and many patients rely on hemodialysis (HD) to survive. HD is associated with undesired life-threatening side effects that are linked to membrane biocompatibility and clinical operating conditions. The present study develops a mathematical model to predict the inflammatory biomarkers released in HD patients based on membrane morphology, chemistry, and interaction affinity. Based on the morphological characteristics of two clinical-grade HD membrane modules (CTA and PAES-PVP) commonly used in Canadian hospitals, a molecular docking study, and the release of inflammatory cytokines during HD and in vitro incubation experiments, we develop five sets of equations that describe the concentration of eight biomarkers (serpin/antithrombin-III, properdin, C5a, 1L-1α, 1L-1β, C5b-9, IL6, vWF). The equations developed are functions of membrane properties (pore size, roughness, chemical composition, affinity to fibrinogen, and surface charge) and HD operating conditions (blood flow rate, Qb, and treatment time, t). We expand our model based on available clinical data and increase its range of applicability in terms of flow rate and treatment time. We also modify the original equations to expand their range of applicability in terms of membrane materials, allowing the prediction and validation of the inflammatory response of several clinical and synthesized membrane materials. Our affinity-based model solely relies on theoretical values of molecular docking, which can significantly reduce the experimental load related to the development of more biocompatible materials. Our model predictions agree with experimental clinical data and can guide the development of novel materials and support evidence-based membrane synthesis of HD membranes, reducing the need for trial-and-error approaches.

Facile Fabrication of Multi-Hydrogen Bond Self-Assembly Poly(MAAc-co-MAAm) Hydrogel Modified PVDF Ultrafiltration Membrane to Enhance Anti-Fouling Property

In this work, a facile preparation method was proposed to reduce natural organics fouling of hydrophobic membrane via UV grafting polymerization with methacrylic acid (MAAc) and methyl acrylamide (MAAm) as hydrophilic monomers, followed by multihydrogen bond self-assembly. The resulting poly(vinylidene fluoride)-membranes were characterized with respect to monomer ratio, chemical structure and morphology, surface potential, and water contact angle, as well as water flux and organic foulants ultrafiltration property. The results indicated that the optimal membrane modified with a poly(MAAc-co-MAAm) polymer gel layer derived from a 1:1 monomer ratio exhibited superior hydrophilicity and excellent gel layer stability, even after ultrasonic treatment or soaking in acid or alkaline aqueous solution. The initial water contact angle of modified membranes was only 36.6° ± 2.9, and dropped to 0° within 13 s. Moreover, flux recovery rates (FRR) of modified membranes tested by bovine serum albumin (BSA), humic acid (HA), and sodium alginate (SA) solution, respectively, were all above 90% after one-cycle filtration (2 h), significantly higher than that of the pure membrane (70–76%). The total fouling rates (R_t) of the pure membrane for three foulants were as high as 47.8–56.2%, while the R_t values for modified membranes were less than 30.8%. Where R_t of BSA dynamic filtration was merely 10.7%. The membrane designed through grafting a thin-layer hydrophilic hydrogel possessed a robust antifouling property and stability, which offers new insights for applications in pure water treatment or protein purification.

Functional hydrogels for diabetic wound management

Diabetic wounds often have a slow healing process and become easily infected owing to hyperglycemia in wound beds. Once planktonic bacterial cells develop into biofilms, the diabetic wound becomes more resistant to treatment. Although it remains challenging to accelerate healing in a diabetic wound due to complex pathology, including bacterial infection, high reactive oxygen species, chronic inflammation, and impaired angiogenesis, the development of multifunctional hydrogels is a promising strategy. Multiple functions, including antibacterial, pro-angiogenesis, and overall pro-healing, are high priorities. Here, design strategies, mechanisms of action, performance, and application of functional hydrogels are systematically discussed. The unique properties of hydrogels, including bactericidal and wound healing promotive effects, are reviewed. Considering the clinical need, stimuli-responsive and multifunctional hydrogels that can accelerate diabetic wound healing are likely to form an important part of future diabetic wound management.

Mussel-inspired surface functionalization of polyamide microfiltration membrane with zwitterionic silver nanoparticles for efficient anti-biofouling water disinfection

Mature microfiltration (MF) membrane is a low-cost, effective, and promising technology to provide affordable purified water for people living in developing countries. However, the lack of disinfection ability and inherent membrane fouling problems have seriously restricted the large-scale application of conventional MF treatment system in producing safe drinking water. In this work, zwitterionic silver nanoparticles (AgNPs) with surface modification of poly(carboxybetaine acrylate-co-dopamine methacryamide) (PCBDA) copolymers were robustly immobilized onto commercial polyamide MF membrane via mussel-inspired chemistry for water disinfection. The designed microfiltration membrane, named as PCBDA@AgNPs-MF, exhibited integrated properties of high and stable payload of AgNPs, broad-spectrum anti-adhesive and antimicrobial activities, and easy removal of inactivated microbial cells from membrane surface. Ascribing to the synergetic effect of anti-adhesive and antimicrobial features brought by zwitterionic PCBDA@AgNPs, the biofilms growth on polyamide membrane surface was significantly inhibited, which showed potential access to achieve long-term biofouling resistance and maintain water flux for conventional MF membrane. As water disinfection device, these attributes enabled PCBDA@AgNPs-MF to effectively disinfect the model and natural bacteria-contaminated water.

Concentration Polarization Enabled Reactive Coating of Nanofiltration Membranes with Zwitterionic Hydrogel

In this study, the bottleneck challenge of membrane fouling is addressed via establishing a scalable concentration polarization (CP) enabled and surface-selective hydrogel coating using zwitterionic cross-linkable macromolecules as building blocks. First, a novel methacrylate-based copolymer with sulfobetain and methacrylate side groups was prepared in a simple three-step synthesis. Polymer gelation initiated by a redox initiator system (ammonium persulfate and tetramethylethylenediamine) for radical cross-linking was studied in bulk in order to identify minimum ("critical") concentrations to obtain a hydrogel. In situ reactive coating of a polyamide nanofiltration membrane was achieved via filtration of a mixture of the reactive compounds, utilizing CP to meet critical gelation conditions solely within the boundary layer. Because the feasibility was studied and demonstrated in dead-end filtration mode, the variable extent of CP was estimated in the frame of the film model, with an iterative calculation using experimental data as input. This allowed to discuss the influence of parameters such as solution composition or filtration rate on the actual polymer concentration and resulting hydrogel formation at the membrane surface. The zwitterionic hydrogel-coated membranes exhibited lower surface charge and higher flux during protein filtration, both compared to pristine membranes. Salt rejection was found to remain unchanged. Results further reveal that the hydrogel coating thickness and consequently the reduction in membrane permeance due to the coating can be tuned by variation of filtration time and polymer feed concentration, illustrating the novel modification method's promising potential for scale-up to real applications.

A review on surface modification methods of poly(arylsulfone) membranes for biomedical applications

Considerable methods have so far been used for the surface modification of biomedical membranes. Several reviews and articles have been published on the improvements achieved in the field of poly(arylsulfone) membranes subjected to various surface modification methods and used in biomedical applications. This review concentrates on the surface modification, biological applications and future perspective of the poly(arylsulfone) biomedical membranes. Different surface modification procedures employed for the poly(arylsulfone) membranes have been classified, studied and compared. Diverse surface modification techniques include surface coating, chemical modification and immobilization/cross-linking, grafting, surface zwitterionicalization, mussel-inspired coating and layer-by-layer assembly. Furthermore, we review the recent research studies performed on the surface modification of the poly(arylsulfone) biomedical membranes. Meanwhile, the properties of biomedical membranes are also discussed in each section. At last, the future perspective and challenges of the strategies utilized for the surface modification of poly(arylsulfone) biomedical membranes are presented.

Stimuli-Responsive Zwitterionic Core-Shell Microgels for Antifouling Surface Coatings

Fouling on filtration membranes is induced by the nonspecific interactions between the membrane surface and the foulants, and effectively hinders their efficient use in various applications. Here, we established a facile method for the coating of membrane surface with a dual stimuli-responsive antifouling microgel system enriched with a high polyzwitterion content. Different poly(sulfobetaine) (PSB) zwitterionic polymers with defined molecular weights and narrow dispersities were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and integrated onto poly(N-vinylcaprolactam) (PVCL) microgels via a controlled dosage of a cross-linker, adapting a precipitation polymerization technique to obtain a core-shell microstructure. Increasing the PSB macro-RAFT concentration resulted in a shift of both upper critical solution temperature and lower critical solution temperature toward higher temperatures. Cryogenic transmission electron microscopy at different temperatures suggested the formation of a core-shell morphology with a PVCL-rich core and a PSB-rich shell. On the other hand, the significant variations of different characteristic proton signals and reversible phase transitions of the microgel constituents were confirmed by temperature-dependent ¹H NMR studies. Utilizing a quartz crystal microbalance with dissipation monitoring, we have been able to observe and quantitatively describe the antipolyelectrolyte behavior of the zwitterionic microgels. The oscillation frequency of the sensor proved to change reversibly according to the variations of the NaCl concentration, showing, in fact, the effect of the interaction between the salt and the opposite charges present in the microgel deposited on the sensor. Poly(ethersulfone) membranes, chosen as the model surface, when functionalized with zwitterionic microgel coatings, displayed protein-repelling property, stimulated by different transition temperatures, and showed even better performances at increasing NaCl concentration. These kinds of stimuli-responsive zwitterionic microgel can act as temperature-triggered drug delivery systems and as potential coating materials to prevent bioadhesion and biofouling as well.

Development and investigation of novel antifouling cellulose acetate ultrafiltration membrane based on dopamine modification

In this contribution, a novel cellulose acetate modified with dopamine (CA-DA) membrane material was designed and prepared by a two-step route consist of chlorination and further substitution reactions. The chemical structure of the prepared CA-DA material was determined by FTIR and ¹H NMR, respectively. The CA-DA ultrafiltration membrane was subsequently fabricated by the scalable phase inversion process. Compared with cellulose acetate membrane as the control sample, the introduction of dopamine improved the porosity, pore size and hydrophilicity of the CA-DA membrane, which was helpful to the water permeability (181.2 L/m²h) without obviously affecting the protein rejection (93.5%). According to the static protein adsorption and dynamic cycle ultrafiltration experiments, the CA-DA membrane displayed persistent antifouling performance, which was verified by flux recovery ratio, flux decline ratio and filtration resistance. Moreover, the water flux recovery ratio of the CA-DA membrane was retained at 97.3% after three-cycles of BSA solution filtration, which was much higher than that of the reference CA membrane. This new approach provided a long life and excellent ultrafiltration performance for polymer-based membranes, which has potential application prospects in the field of separation process.

Molecular insight into the interfacial chemical functionalities regulating heterogeneous calcium-arsenate nucleation

Heterogeneous nucleation induced by natural organic matter (NOM) can lower the energy barrier for calcium arsenate (Ca-As) precipitation, which aids in immobilizing arsenate (As^Ⅴ). However, it remains unclear how certain chemical functionalities of NOM affect Ca-As nucleation at the molecular scale. By analyzing changes in the local supersaturation and/or interfacial energy, the present work investigates the Ca-As heterogeneous nucleation kinetics and mechanisms on functional-group-modified model surfaces. Mica surfaces modified by functional groups of amine (NH₂), hydroxyl (OH), or carboxyl (COOH) through self-assembled monolayers were used to investigate how chemical functionalities affect the Ca-As heterogeneous nucleation, in which the distributions of formation kinetics and size (as measured by the change in particle height) of nucleated Ca-As particles were measured by using in situ atomic force microscopy. In a parallel analysis, a quartz-crystal microbalance with dissipation was used to detect the buildup of Ca²⁺ and/or HAsO₄^2- ions at the solid-fluid interface. PeakForce quantitative nanomechanical mapping and dynamic force spectroscopy using functional-group-modified tips made it possible to calculate the binding energies holding functional groups to Ca-As particles. Nucleated Ca-As particles were characterized by using Raman spectroscopy and high-resolution transmission electron microscopy. The results indicate that the height of amorphous Ca-As particles formed on a modified mica surface may be ranked in descending order as NH₂ > OH > bare mica > COOH, as determined by the buildup of Ca²⁺ and HAsO₄^2- ions at the solid-fluid interface and the decrease of interfacial energy due to the functional groups. These nanoscale observations and molecular-scale determinations improve our understanding of the roles played by chemical functionalities on NOM in immobilizing dissolved As through heterogeneous nucleation in soil and water.

Enhancement of the Fouling Resistance of Zwitterion Coated Ceramic Membranes

Ceramic membranes suffer from rapid permeability loss during filtration of organic matter due to their fouling propensity. To address this problem, iron oxide ultrafiltration membranes were coated with poly(sulfobetaine methacrylate) (polySBMA), a superhydrophilic zwitterionic polymer. The ceramic-organic hybrid membrane was characterized by scanning electron microscopy (SEM) and optical profilometry (OP). Membranes with and without polySBMA coating were subjected to fouling with bovine serum albumin solution. Hydraulic cleaning was significantly more effective for the coated membrane than for the non-coated one, as 56%, 66%, and 100% of the fouling was removed for the first, second, and third filtration cycle, respectively. Therefore, we can highlight the improved cleaning due to an increased fouling reversibility. Although some loss of polymer during operation was detected, it did not affect the improved behavior of the tested membranes.

Study on Heat Transfer Performance and Anti-Fouling Mechanism of Ternary Ni-W-P Coating

Since the formation of fouling reduces heat transfer efficiency and causes energy loss, anti-fouling is desirable and may be achieved by coating. In this work, a nickel-tungsten-phosphorus (Ni-W-P) coating was prepared on the mild steel (1015) substrate using electroless plating by varying sodium tungstate concentration to improve its anti-fouling property. Surface morphology, microstructure, fouling behavior, and heat transfer performance of coatings were further reported. Also, the reaction path, transition state, and energy gradient change of calcite, aragonite, and vaterite were also calculated. During the deposition process, as the W and P elements were solids dissolved in the Ni crystal cell, the content of Ni element was obviously higher than that of the other two elements. Globular morphology was evenly covered on the surface. Consequently, the thermal conductivity of ternary Ni-W-P coating decreases from 8.48 W/m·K to 8.19 W/m·K with the increase of W content. Additionally, it goes up to 8.93 W/m·K with the increase of heat source temperature 343 K. Oxidation products are always accompanied by deposits of calcite-phase CaCO3 fouling. Due to the low surface energy of Ni-W-P coating, Ca2+ and [CO3]2− are prone to cross the transition state with a low energy barrier of 0.10 eV, resulting in the more formation of aragonite-phase CaCO3 fouling on ternary Ni-W-P coating. Nevertheless, because of the interaction of high surface energy and oxidation products on the bare matrix or Ni-W-P coating with superior W content, free Ca2+ and [CO3]2− can be easy to nucleate into calcite. As time goes on, the heat transfer efficiency of material with Ni-W-P coating is superior to the bare surface.

Graphene Oxide-Functionalized Membranes: The Importance of Nanosheet Surface Exposure for Biofouling Resistance

Surface functionalization using two-dimensional (2D) graphene oxide (GO) materials is a promising technique to enhance the biofouling resistance of membranes used in water purification and reuse. However, the role of GO exposure, which is crucial for the contact-mediated toxicity mechanism, has not been well evaluated or elucidated in previous studies. Herein, we employ bioinspired polydopamine chemistry to fabricate GO-functionalized membranes through two strategies: coating and blending. The two types of GO-functionalized membranes displayed comparable roughness, hydrophilicity, water permeability, and solute retention properties but different degrees of GO nanosheet exposure on the membrane surface. When in contact with the model bacterium, Escherichia coli, the GO-coated membrane exhibited enhanced biofouling resistance compared to that of the GO-blended membrane, as evidenced by lower viable cells in static adsorption experiments, and lower water flux decline and higher flux recovery in dynamic biofouling experiments. Moreover, the development of biofilm on the GO-coated membrane was also inhibited to a greater extent than on the GO-blended membrane. Taken together, our findings indicate the paramount importance of GO exposure on the membrane surface in conferring antibacterial activity and biofouling resistance, which should be considered in the future design of antibiofouling membranes using 2D nanomaterials.

Radical polymerization as a versatile tool for surface grafting of thin hydrogel films

The surface of solid substrates is the main part that interacts with the environment.

Zwitterionically modified alginates mitigate cellular overgrowth for cell encapsulation

Foreign body reaction (FBR) to implanted biomaterials and medical devices is common and can compromise the function of implants or cause complications. For example, in cell encapsulation, cellular overgrowth (CO) and fibrosis around the cellular constructs can reduce the mass transfer of oxygen, nutrients and metabolic wastes, undermining cell function and leading to transplant failure. Therefore, materials that mitigate FBR or CO will have broad applications in biomedicine. Here we report a group of zwitterionic, sulfobetaine (SB) and carboxybetaine (CB) modifications of alginates that reproducibly mitigate the CO of implanted alginate microcapsules in mice, dogs and pigs. Using the modified alginates (SB-alginates), we also demonstrate improved outcome of islet encapsulation in a chemically-induced diabetic mouse model. These zwitterion-modified alginates may contribute to the development of cell encapsulation therapies for type 1 diabetes and other hormone-deficient diseases.

Dual Thermo- and pH-Responsive Behavior of Double Zwitterionic Graft Copolymers for Suppression of Protein Aggregation and Protein Release

Graft copolymers consisting of two different zwitterionic blocks were synthesized via reversible addition fragmentation chain transfer polymerization. These polymers showed dual properties of thermo- and pH-responsiveness in an aqueous solution. Ultraviolet-visible spectroscopy and dynamic light scattering were employed to study the phase behavior under varying temperatures and pH values. Unlike the phase transition temperatures of other graft copolymers containing nonionic blocks, the phase transition temperature of these polymers was easily tuned by changing the polymer concentration. Owing to the biocompatible and stimuli-responsive nature of the polymers, this system was shown to effectively release proteins (lysozyme) while simultaneously protecting them against denaturation. The positively charged lysozyme was shown to bind with the negatively charged polymer at the physiological pH (pH 7.4). However, it was subsequently released at pH 3, at which the polymer exhibits a positive charge. Protein aggregation studies using a residual enzymatic activity assay, circular dichroism, and a Thioflavin T assay revealed that the secondary structure of the lysozyme was retained even after harsh thermal treatment. The addition of these polymers helped the lysozyme retain its enzymatic activity and suppressed its fibrillation. Both polymers showed excellent protein protection properties, with the negatively charged polymer exhibiting slightly superior protein protection properties to those of the neutral polymer. To the best of the authors' knowledge, this is the first study to develop a graft copolymer system consisting of two different zwitterionic blocks that shows dual thermo- and pH-responsive properties. The presence of the polyampholyte structure enables these polymers to act as protein release agents, while simultaneously protecting the proteins from severe stress.

Understanding the Antifouling Mechanism of Zwitterionic Monomer-Grafted Polyvinylidene Difluoride Membranes: A Comparative Experimental and Molecular Dynamics Simulation Study

The antifouling process of the membrane is very vital for the highly efficient treatment of industrial wastewater, especially high salinity wastewater containing oil and other pollutants. In the present work, the dynamical antifouling mechanism is explored via molecular dynamics simulations, while the corresponding experiments about surface properties of the zwitterionic monomer-grafted polyvinylidene difluoride membrane are designed to verify the simulated mechanism. Water can form a stable hydration layer at the grafted membrane surface, where all the simulated radial distribution function of water/membrane, hydrogen bond number, water diffusivity, and experimental oil contact angles are stable. However, the water flux across the membrane will increase first and then decrease as the grafting ratio increases, which not only depends on the reduced pore size of the zwitterionic monomer-grafted membrane but also results from water diffusion. Furthermore, the dynamical fouling processes of pollutants (taking sodium alginate as an example) on the grafted membrane in water and brine solution are investigated, where both the high grafting ratio and electrolyte CaCl₂ can enhance the fouling energy barrier of the pollutant. The results show that both the enhanced hydrophilic property and the electrostatic repulsion can affect the antifouling capability of the grafted membrane. Finally, the ternary synergistic antifouling mechanisms among the zwitterionic membrane, electrolyte, and pollutant sodium alginates are discussed, which could be helpful for the rational design and preparation of new and highly efficient zwitterionic antifouling membranes.

Interaction Forces on Polyampholytic Hydrogel Gradient Surfaces

Rational design and informed development of nontoxic antifouling coatings requires a thorough understanding of the interactions between surfaces and fouling species. With more complex antifouling materials, such as composites or zwitterionic polymers, there follows also a need for better characterization of the materials as such. To further the understanding of the antifouling properties of charge-balanced polymers, we explore the properties of layered polyelectrolytes and their interactions with charged surfaces. These polymers were prepared via self-initiated photografting and photopolymerization (SIPGP); on top of a uniform bottom layer of anionic poly(methacrylic acid) (PMAA), a cationic poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) thickness gradient was formed. Infrared microscopy and imaging spectroscopic ellipsometry were used to characterize chemical composition and swelling of the combined layer. Direct force measurements by colloidal probe atomic force microscopy were performed to investigate the forces between the polymer gradients and charged probes. The swelling of PMAA and PDMAEMA are very different, with steric and electrostatic forces varying in a nontrivial manner along the gradient. The gradients can be tuned to form a protein-resistant charge-neutral region, and we demonstrate that this region, where both electrostatic and steric forces are small, is highly compressed and the origin of the protein resistance of this region is most likely an effect of strong hydration of charged residues at the surface, rather than swelling or bulk hydration of the polymer. In the highly swollen regions far from charge-neutrality, steric forces dominate the interactions between the probe and the polymer. In these regions, the SIPGP polymer has qualitative similarities with brushes, but we were unable to quantitatively describe the polymer as a brush, supporting previous data suggesting that these polymers are cross-linked.

Synergy on Surfaces: Anti-Biofouling Interfaces Using Surface-Attached Antimicrobial Peptides PGLa and Magainin-2

The synergistic effect of antimicrobial compounds is an important phenomenon that can increase the potency of treatment and might be useful against the formation of biofilms on surfaces. A strong inhibition of microbial viability on surfaces can potentially delay the development of biofilms on treated surfaces, thereby enhancing the performance of water-purification technologies and medical devices, for example, to prevent hospital-acquired infections. However, the synergistic effects of surface-immobilized antimicrobial peptides (AMPs) have not yet been reported. Here, we demonstrate the synergistic antimicrobial effects of the AMPs PGLa and magainin-2 on modified reverse-osmosis (RO) membranes. These AMPs are known to act synergistically in the free state, but their antimicrobial synergistic effects have not yet been reported in a surface-immobilized state. The AMPs were functionalized with alkyne linkers and covalently attached to RO membranes modified with azides, using a click chemistry reaction. The resulting RO membranes showed reduced contact angles, indicating increased wettability. X-ray photoelectron spectroscopy confirmed the presence of the two peptides on the membranes via changes in the amounts of carbon, oxygen, and sulfur, which led to an increased S/C ratio, probably because of the sulfur present in the methionine residue of the peptides. The synergistic activity was measured with the free peptides in solution and covalently bound on RO membrane surfaces by observing increased leakage of 5(6)-carboxyfluorescein from large unilamellar vesicles. The synergistic antimicrobial activity against Pseudomonas aeruginosa was observed using surface-activity assays, where the AMP-modified RO membranes showed an effective inhibition of P. aeruginosa biofilm growth, as compared with unmodified membranes. An enhanced activity of antimicrobials on surfaces might lead to potent antimicrobial surfaces, which could result in more fouling-resistant water-treatment membranes.