Refined regulation and nitrogen doping of biochar derived from ramie fiber by deep eutectic solvents (DESs) for catalytic persulfate activation toward non-radical organics degradation and disinfection

Shaddock peels biochar doping with Fe-Co bimetal for peroxymonosulfate activation on the degradation of tetracycline: The influence of HCO3- and PO43

To reduce the negative impact of antibiotics on the water environment, shaddock peels biochar co-doped with iron and cobalt (Fe-Co@SPC) was employed in the peroxymonosulfate (PMS) system to eliminate tetracycline (TC). The obtained Fe-Co@SPC could efficiently activate PMS and degrade 95.6 % of TC within 1 h at pH 9.06. Notably, the presence of HCO3- promoted PMS activation, which was mainly because the weakly alkaline system inhibited metal ion leaching. PO43- invaded the surface active sites on the Fe-Co@SPC and formed O-P/C-PO3, which inhibited PMS activation. The scavenging and EPR analysis results demonstrated SO4•-, •OH, 1O2 and O2•- were the major ROS. Besides, the C=O functional group and Fe-Co bimetal on Fe-Co@SPC accelerated the electronic transfer. Three reaction pathways were proposed in the Fe-Co@SPC/PMS system and the potential ecotoxicity of the intermediates was significantly declined. Based on the reusability and stability, Fe-Co@SPC could efficiently activate PMS to degrade organic pollutants in water bodies.

A comprehensive review of modified biochar-based advanced oxidation processes for environmental pollution remediation: efficiency, mechanism, toxicity assessment

Biochar (BC) has been demonstrated efficacy in activating oxidants to enhance environmental contaminant degradation. However, performance limitations of pristine biochar, including insufficient active sites and low electron transfer efficiency, primarily stemming from feedstock heterogeneity and pyrolytic parameter variations, resulting in suboptimal activation efficiency in practical applications. Recent studies demonstrated that targeted functionalization strategies, such as heteroatom doping, metal loading, and acid/alkali modification, could significantly improving activation performance of biochar, which was critical for advancing biochar-based advanced oxidation processes. In this review, the modification methods of biochar and their applications in activating diverse oxidants for water purification, soil remediation, air pollutant mitigation, and antimicrobial disinfection were summarized. Additionally, the differences in mechanisms among modified biochars for activating different oxidants in pollutant degradation were systematically illustrated. This review indicated that both free radicals and non-free radicals pathway played key roles in pollutant removal, either individually or through synergistic effects. Furthermore, potential challenges in applying modified biochar-based AOPs at a practical scale were also discussed. This review have shown that the presence of natural substances and impurities in these environments can deplete active components, resulting in reduced pollutant degradation efficiencies compared to controlled laboratory conditions. The current review illustrated that the toxicity of modified biochar was related to feedstocks and pyrolysis processes. Meanwhile, the toxicity of degradation intermediates could significantly reduce using modified biochar-based AOPs. Overall, this review provide insights for future research in this field.

Iron scrap derived nano zero-valent iron/biochar activated persulfate for p-arsanilic acid decontamination with coexisting microplastics

P-arsanilic acid (AA) has received widespread attention because of its conversion to more toxic inorganic arsenic compounds (arsenate and arsenite) in the natural ecosystems. Its removal process and mechanisms with co-existence of microplastics remain unkown. In this study, biochar loaded with nano zero-valent iron (nZVI) particles (ISBC) was prepared by using iron scrap obtained from a steel works and wood chips collected from a wood processing plant. The advanced oxidation system of sodium persulfate (PDS) activated by ISBC was applied for AA degradation and inorganic arsenic control in aqueous media. More than 99% of the AA was completely degraded by the ISBC/PDS system, and the As(III) on AA was almost completely oxidized to As(V) and finally removed by ISBC. HCO3- inhibited the removal of AA by the ISBC/PDS system, while Cl- had a dual effect that showing inhibition at low concentrations yet promotion at high concentrations. The effect of microplastics on the degradation of AA by the ISBC/PDS system was further investigated due to the potential for combined microplastic and organic arsenic contamination in rural/remote areas. Microplastics were found to have little effect on AA degradation in the ISBC/PDS system, while affect the transport of inorganic arsenic generated from AA degradation. Overall, this study provides new insights and methods for efficient removal of p-arsanilic acid from water with coexisting microplastics.

Effective extraction of larch holocellulose with alkaline deep eutectic solvent and production of furan chemicals with the coordination of temperature-controlled polyoxometalates and metal salt in biphasic system

This study focused on extracting holocellulose from Changbai larch waste, which is rich in hexose and beneficial for furan chemicals production. Various alkaline deep eutectic solvents (DESs) was applied in the extraction of holocellulose. DES composed of lysine (Lys) and 2-aminoethanol (MEA) with strong alkalinity had a superior ability to remove lignin, and the purity of holocellulose could reach 82.7 %. Consequently, a double-acid system formed by a temperature-controlled polyoxometalates catalyst (ChnH3-nPW12, n = 1, 2, 3,) prepared by choline chloride (ChCl) and phosphotungstic acid (H3PW12O40) and different metal salts were used in the hydrolysis of holocellulose to 5-hydroxymethylfurfural (HMF) and 2-furaldehyde (FF) in a two-phase system of water and organic solvent. The yields of HMF and FF reached 43.5 % and 78.2 %, respectively, when ChH2PW12 and AlCl3 were employed under the conditions of 10 mL water/methyl isobutyl ketone (MIBK) (1:9, V:V), 9 h, and 150 °C. ChH2PW12is easy to recycle and can be used up to 5 times. This study offers a novel strategy to retain as much hemicellulose as possible to achieve holocellulose by alkaline DESs, and the one-pot process by the coordination of polyoxometalates and metal salt provides a simultaneous production of high-value furan chemicals from larch waste.

Efficient degradation of sulfadiazine via facilitated electron transfer by iron-carbon catalyst with highly exposed active sites

The inaccessible active sites, excessive metal leaching and radical mediated degradation pathway greatly hinder the performances of Fe-C composite catalyst oxidation process in the advanced oxidation water treatment. Herein, a facile method was developed to in situ growth of MIL-53 (Fe) on the powder active carbon (PAC) surface by a mild condition, which finally yields PAC supported Fe3O4@C particles (PAC@MOFs-2T) after heat treatment. The detailed characterizations indicate that the fine Fe3O4 particles encapsulated with carbon layers were evenly anchored on the PAC as active sites, which made the catalytic centers highly accessible for the peroxydisulfate activation and sulfadiazine degradation. In addition, the carbon layers, coated on the active sites could prevent the metal leaching during the catalytic process resulting in the high stability in a wide pH range. More attractively, the density functional theory (DFT) simulations and emperimental evidences further proved that the oxidation was dominated by a electron transfer process (ETP), during which, the peroxydisulfate (PDS) was adsorbed on Fe3O4 to form PDS∗ with high oxidation potential to initiate the ETP. Meanwhile, it was also demonstrated that the optimized sample PAC@MOFs-2T enriched with electron donating groups could selectively degrade the sulfadiazine, which avoid the negative impacts from the co-existed foreign ions and organic matters during the oxidation process. In addition, the toxicity analysis of intermediate products revealed that the sulfadiazine can be degradated into low-toxic or non-toxic products, which further permits viability of this ETP mediated advanced oxidation processes.

A comprehensive review of the "black gold catalysts" in wastewater treatment: Properties, applications and bibliometric analysis

A significant amount of effort has been devoted to the utilization of biochar-based catalysts in the treatment of wastewater. By virtue of its abundant functional groups and high specific surface area, biochar holds significant promise as a catalyst. This article presents a comprehensive systematic review and bibliometric analysis covering the period from 2009 to 2024, focusing on the restoration of wastewater through biochar catalysis. The production, activation, and functionalization techniques employed for biochar are thoroughly examined. In addition, the application of advanced technologies such as advanced oxidation processes (AOPs), catalytic reduction reactions, and biochemically driven processes based on biochar are discussed, with a focus on elucidating the underlying mechanisms and how surface functionalities influence the catalytic performance of biochar. Furthermore, the potential drawbacks of utilizing biochar are also brought to light. To emphasize the progress being made in this research field and provide valuable insights for future researchers, a scientometric analysis was conducted using CiteSpace and VOSviewer software on 595 articles. Hopefully, this review will enhance understanding of the catalytic performance and mechanisms pertaining to biochar-based catalysts in pollutant treatment while providing a perspective and guidelines for future research and development efforts in this area.

Efficient peroxymonosulfate activation by nanoscale zerovalent iron for removal of sulfadiazine and sulfadiazine resistance bacteria: Sulfidated modification or not

Whether it's necessary to extra chemical synthesis steps to modify nZVI in peroxymonosulfate (PMS) activation process are worth to further investigation. The 56 mg/L nZVI/153.65 mg/L PMS and 56 mg/L sulfidated nZVI (S-nZVI) (S/Fe molar ratio = 1:5)/153.65 mg/L PMS) processes could effectively attain 97.7% (with kobs of 3.7817 min-1) and 97.0% (with kobs of 3.4966 min-1) of the degradation of 20 mg/L sulfadiazine (SDZ) in 1 min, respectively. The nZVI/PMS system could quickly achieve 85.5% degradation of 20 mg/L SDZ in 1 min and effectively inactivate 99.99% of coexisting Pseudomonas. HLS-6 (5.81-log) in 30 min. Electron paramagnetic resonance tests and radical quenching experiments determined SO4•-, HO•, 1O2 and O2•- were responsible for SDZ degradation. The nZVI/PMS system could still achieve the satisfactory degradation efficiency of SDZ under the influence of humic acid (exceeded 96.1%), common anions (exceeded 67.3%), synthetic wastewater effluent (exceeded 90.7%) and real wastewater effluent (exceeded 78.7%). The high degradation efficiency of tetracycline (exceeded 98.9%) and five common disinfectants (exceeded 96.3%) confirmed the applicability of the two systems for pollutants removal. It's no necessary to extra chemical synthesis steps to modify nZVI for PMS activation to remove both chemical and biological pollutants.

Research Progress on the Degradation of Organic Pollutants in Water by Activated Persulfate Using Biochar-Loaded Nano Zero-Valent Iron

Biochar (BC) is a new type of carbon material with a high specific surface area, porous structure, and good adsorption capacity, which can effectively adsorb and enrich organic pollutants. Meanwhile, nano zero-valent iron (nZVI) has excellent catalytic activity and can rapidly degrade organic pollutants through reduction and oxidation reactions. The combined utilization of BC and nZVI can not only give full play to their advantages in the adsorption and catalytic degradation of organic pollutants, but also help to reduce the agglomeration of nZVI, thus improving its efficiency in water treatment and providing strong technical support for water resources protection and environmental quality improvement. This article provides a detailed introduction to the preparation method and characterization technology, reaction mechanism, influencing factors, and specific applications of BC and nZVI, and elaborates on the research progress of BC-nZVI in activating persulfate (PS) to degrade organic pollutants in water. It has been proven experimentally that BC-nZVI can effectively remove phenols, dyes, pesticides, and other organic pollutants. Meanwhile, in response to the existing problems in current research, this article proposes future research directions and challenges, and summarizes the application prospects and development trends of BC-nZVI in water treatment. In summary, BC-nZVI-activated PS is an efficient technology for degrading organic pollutants in water, providing an effective solution for protecting water resources and improving environmental quality, and has significant application value.

Three-dimensional rGO/CNT/g-C3N4 macro discs as an efficient peroxymonosulfate activator for catalytic degradation of sulfamethoxazole

Over the past few years, advanced oxidation processes (AOPs) have shown promising efficiencies for wastewater remediation. Carbocatalysis, in particular, has been exploited widely thanks to its sustainable and economical properties but has an issue of recovery and reusability of the catalysts. To address this, three-dimensional (3D) binary and ternary graphene-based composites in the form of macro discs were created to activate peroxymonosulfate (PMS) for catalytic oxidation of sulfamethoxazole (SMX). Graphene oxide served as the base, while graphitic carbon nitride (g-C3N4) and/or single-walled carbon nanotubes (SWCNTs) were added. Among the various discs synthesized, rGNTCN discs (ternary composite) were proven to be the most efficient by completely degrading SMX in 60 min owing to their large surface area and nitrogen loading. The catalytic system was further optimized by varying the reaction parameters, and selective radical quenching and electron paramagnetic resonance tests were performed to identify the active radical, revealing the synergistic role of both radical and non-radical pathways. This led to the development of possible SMX degradation pathways. This research not only provides insights into ternary carbocatalysis but also gives a novel breakthrough in catalyst recovery and reusability by transforming nanocatalysts into macro catalysts.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

The Effect of Organic Matter from Sewage Sludge as an Interfacial Layer on the Surface of Nano-Al and Fluoride

Due to its high reactivity, the nano aluminum particle (n-Al) has attracted more attention in energetic materials but is easily oxidized during processing. In order to realize sewage sludge (SS) resource and n-Al coating, the organic matter was extracted from SS, using the deep eutectic solvent method due to its strong dissolving capacity, and then the organic matter was pretreated by ball milling, which was used as an interfacial layer between n-Al and fluoride. It was found that organic matter was successfully extracted from SS. The main organic matter is proteins. The ball milling method can effectively destroy the secondary structure of proteins to release more active functional groups. During the pretreatment, the Maillard reaction broke the proteins structure to form more active low molecular weight compounds. It was confirmed that n-Al can be coated by PBSP under mild conditions to form a uniform core-shell structure. PFOA can effectively coat the n-Al@PBSP to form n-Al@PBSP/PFOA, which can enhance the combustion of n-Al. The gas phase flame temperature can notably improve to 2892 K. The reaction mechanism between n-Al and coating was analyzed. The results could help SS treatment and provide new insights for n-Al coating and SS-based organic matter recovery and utilization.

Dual redox cycles of Mn(Ⅱ)/Mn(III) and Mn(III)/Mn(IV) on porous Mn/N co-doped biochar surfaces for promoting peroxymonosulfate activation and ciprofloxacin degradation

Mn and N co-doped biochar (Mn-N-TS) was prepared as an effective catalyst to activate peroxymonosulfate (PMS) for ciprofloxacin (CIP) degradation. As opposed to Mn-TS and N-TS, Mn-N-TS had more active sites containing N and Mn, as well as a greater specific surface area (923.733 m² g^-1). The Mn-N-TS exhibited excellent PMS activation ability. In the Mn-N-TS/PMS system, the CIP removal efficiency was 91.9% in 120 min. Mn and N co-doping could accelerate electron transfer between CIP and PMS molecules. Simultaneously, defect sites, graphitic N, pyridinic N, C═O groups, and Mn(II)/Mn(III)/Mn(IV) redox cycles acted as active sites to activate PMS and generate free radicals (OH, SO₄^- and ¹O₂). Furthermore, the Mn-N-TS/PMS system could effectively degrade CIP in a wide pH range, background substances, and actual water. Finally, a probable mechanism of PMS activation by Mn-N-TS was proposed. In conclusion, this work gave a novel direction for the rational design of Mn and N co-doped biochar.

Applications of biochar in sulfate radical-based advanced oxidation processes for the removal of pharmaceuticals and personal care products

Recently, biochar (BC) has been increasingly used as a catalyst for the degradation of 'emerging pollutants' (EPs). Pharmaceuticals and personal care products (PPCPs), which come under 'EPs', can be harmful to the aquatic ecosystem despite being present in very low concentrations (ng/L-μg/L). Advanced oxidation processes (AOPs), which produce sulfate radical (SR-AOPs), show a great potential to degrade PPCPs effectively from wastewater. It is mainly due to the higher stability, long half-lives and better non-selectivity of SO₄^{• -} compared with AOPs with •OH generation. Furthermore, research focus is now given on AOPs coupled with BC-supported catalyst to enhance the degradation of PPCPs because of quicker generation of radicals (•OH, SO₄^•-) by the activation of persulfate (PS) and peroxymonosulfate (PMS). This article sheds light on the catalytic ability of BC after its physical and chemical modifications such as acid/alkali treatment and metal doping. The role of persistent free radicals (PFRs) in the BC for effective removal of PPCPs has been elaborated. Its potential applications in synthetic as well as real wastewater have also been discussed.

Molybdenum-doped iron oxide nanostructures synthesized via a chemical co-precipitation route for efficient dye degradation and antimicrobial performance: in silico molecular docking studies

In this research, various concentrations of molybdenum (2, 4 and 6 wt%) doped Fe₃O₄ nanostructures (Mo-Fe₃O₄ NSs) were prepared via a co-precipitation technique. Various techniques were then used to investigate the optical, morphological and structural properties of the NSs in the presence of the dopant materials. X-ray diffraction (XRD) was used to investigate the crystalline nature of the prepared NSs and confirm the orthorhombic and tetragonal structure of Fe₃O₄, with a decrease in crystallinity and crystallite sizes of 36.11, 38.45, 25.74 and 24.38 nm with increasing concentration of Mo (2, 4 and 6%). Fourier-transform infrared (FTIR) spectroscopy analysis was carried out to examine the functional groups in the NSs. Structure, surface morphology and topography were examined via field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM), which confirmed the fabrication of nanoparticles and nanorods and a floccule-like morphology with a higher doping concentration and the interlayer d-spacing was calculated using high-resolution (HR)TEM, the results of which were a good match to the XRD data. The presence of Mo, Fe and O in a lattice of Mo (2, 4 and 6%) doped Fe₃O₄ was confirmed by energy dispersive X-ray spectroscopy (EDS) analysis. The energy band gap (E _g) was measured via the optical analysis of pure and doped samples, showing a decrease from 2.76 to 2.64 eV. The photoluminescence (PL) spectra exhibit a higher charge combination rate of electron-hole pairs with a higher concentration of doping. The NSs exhibited excellent catalytic activity (CA) in degrading methylene blue (MB) dye in a basic medium by around 86.25%. Additionally, the antimicrobial activity was tested against Escherichia coli (E. coli) bacteria. Pairs of electrons and holes are the fundamental basis for generating reactive oxygen species that kill bacteria. The significant inhibition zones were calculated against E. coli bacteria at around 3.45 mm compared to ciprofloxacin. In silico docking investigations of the Mo-Fe₃O₄ NSs for dihydropteroate synthase (DHPS, binding score: 6.16 kcal mol^-1), dihydrofolate reductase (DHFR, binding score: 6.01 kcal mol^-1), and β-ketoacyl-acyl carrier protein synthase III (FabH, binding score: 5.75 kcal mol^-1) of E. coli show the suppression of the aforementioned enzymes as a potential mechanism besides their microbicidal assay.

Resource utilization of chicken manure to produce biochar for effective removal of levofloxacin hydrochloride through peroxymonosulfate activation: The synergetic function of graphitization and nitrogen functionality

Transforming hazardous livestock manure into biochar as an advanced oxidation processes catalyst is a two-in-one strategy to treat waste by waste. In this work, a self-modified biochar catalyst obtained from chicken manure is developed for peroxymonosulfate activation to degrade levofloxacin hydrochloride. The deterioration rate of levofloxacin hydrochloride reached 89% in 40 min, after three cycles of the catalyst, the LFX still maintained 52% degradation rate. And under low levofloxacin hydrochloride concentration, the degradation rate can reach 99% within 40 min. Apart from catalyst characterization and optimization, the effects of catalyst, peroxymonosulfate, levofloxacin hydrochloride, co-existing anions, and natural organic matter concentrations during the reaction are investigated. Additionally, the quenching experiments and electron spin resonance spectroscopy both reveal the reaction mechanism. As the graphitic nitrogen combined with the sp²-hybridized carbon in biochar was highly electronegative, thus appealing electrons from neighboring carbon networks, making the adjoining carbon atoms to be positively charged, which facilitated the degradation process. The oxidative degradation of levofloxacin hydrochloride was ascribed to non-radical routes including surface-bound radicals, h⁺ and ¹O₂ mediated oxidation, the contribution rates were 91%, 93.5%, and 96.8%, respectively. Moreover, possible degradation pathways of levofloxacin hydrochloride are studied by Density Functional Theory (DFT) and LC-MS analysis. This work provides a novel method to produce chicken manure biochar by self-modified chicken manure during biochar pyrolysis for peroxymonosulfate activation in organic contaminations abatement and reveals the combined effect of graphitization and nitrogen functionalization while providing new ideas for the resource utilization of chicken manure.

Effect of dissolved humic acids and coated humic acids on tetracycline adsorption by K2CO3-activated magnetic biochar

Humic acids (HAs) widely exist in water environment, and has an important impact on the adsorption of pollutants. Herein, HAs (both dissolved and coated) was employed to assess the effect on the removal of the organic contaminant tetracycline (TC) by K₂CO₃ modified magnetic biochar (KMBC). Results showed that low concentration of dissolved HAs promoted TC removal, likely due to a bridging effect, while higher concentration of dissolved HAs inhibited TC adsorption because of the competition of adsorption sites on KMBC. By characterization analysis, coated HAs changed the surface and pore characteristics of KMBC, which suppressed the TC removal. In a sequential adsorption experiment involving dissolved HAs and TC, the addition of HAs at the end of the experiment led to the formation of HAs-TC ligands with free TC, which improved the adsorption capacity of TC. TC adsorption by KMBC in the presence of dissolved HAs and coated HAs showed a downward trend with increasing pH from 5.0 to 10.0. The TC adsorption process was favorable and endothermic, and could be better simulated by pseudo-second-order kinetics and Freundlich isotherm model. Hydrogen bonds and π-π interactions were hypothesized to be the underlying influencing mechanisms.

State-of-the-Art on the Sulfate Radical-Advanced Oxidation Coupled with Nanomaterials: Biological and Environmental Applications

Sulfate radicals (SO₄^-·) play important biological roles in biomedical and environmental engineering, such as antimicrobial, antitumor, and disinfection. Compared with other common free radicals, it has the advantages of a longer half-life and higher oxidation potential, which could bring unexpected effects. These properties have prompted researchers to make great contributions to biology and environmental engineering by exploiting their properties. Peroxymonosulfate (PMS) and peroxydisulfate (PDS) are the main raw materials for SO₄^-· formation. Due to the remarkable progress in nanotechnology, a large number of nanomaterials have been explored that can efficiently activate PMS/PDS, which have been used to generate SO₄^-· for biological applications. Based on the superior properties and application potential of SO₄^-·, it is of great significance to review its chemical mechanism, biological effect, and application field. Therefore, in this review, we summarize the latest design of nanomaterials that can effectually activate PMS/PDS to create SO₄^-·, including metal-based nanomaterials, metal-free nanomaterials, and nanocomposites. Furthermore, we discuss the underlying mechanism of the activation of PMS/PDS using these nanomaterials and the application of SO₄^-· in the fields of environmental remediation and biomedicine, liberating the application potential of SO₄^-·. Finally, this review provides the existing problems and prospects of nanomaterials being used to generate SO₄^-· in the future, providing new ideas and possibilities for the development of biomedicine and environmental remediation.

Phytoremediation plants (ramie) and steel smelting wastes for calcium silicate coated-nZVI/biochar production: Environmental risk assessment and efficient As(V) removal mechanisms

Arsenic is one of the most common and harmful pollutants in environment throughout the world, especially in aqueous solutions. In this study, two kinds of industrial solid wastes (Oxide scale (OS) and Blast furnace slag (BFS)) and one kind of phytoremediation plant waste (Ramie stalk) were used to prepare an environmentally friendly, low-cost, and efficient calcium silicate coated nano zero-valent iron (nZVI)/biochar composite (BOS) for As(V) adsorption. The potential environmental risks of BOS and their effects on removal of arsenic ions from aqueous media were investigated. The adsorption mechanism was explored and discussed based on XRD, SEM-EDS, XPS, etc. The results suggested that the environmental risk and heavy metals toxicity in BOS by co-pyrolysis were significantly reduced compared to the original materials, and no additional contaminant was observed in the subsequent experiments. Simultaneously, the BOS showed excellent As(V) removal capacity (>99%) and regenerative properties. The As(V) removal mechanisms are mainly ascribed to the complexation and co-precipitation between Fe and As, and the hydrogen bond between CO functional group of BOS and As. The mechanism of enhanced nZVI activity for As(V) removal was revealed. A protective layer of Ca₂SiO₄ was formed on the surface of nZVI during the co-pyrolysis process to prevent the passivation of nZVI. During the reaction process, the Ca₂SiO₄ covering the nZVI surface would be continuously detached to expose the fresh surface of nZVI, thus providing more redox activity and adsorption sites. This study provides a new way to treat and recycle industrial steel solid wastes and phytoremediation plant wastes, and the produced calcium silicate coated-nZVI/biochar composite is proposed to be a very promising material for practical remediation of As(V)-contaminated water bodies.

Catalytic removal of attached tetrabromobisphenol A from microplastic surface by biochar activating oxidation and its impact on potential of disinfection by-products formation

There are numerous studies concerning the impacts of widespread microplastic pollution on the ecological environment, and it shows synergistic effect of microplastics and co-exposed pollutants in risk enhancement. However, the control methods for removing harmful pollutants from microplastic surface to reduce their ecological toxicity has rarely been explored. In this paper, magnetic graphitized biochar as a catalyst is shown to achieve 97% removal of tetrabromobisphenol A (TBBPA) from microplastics by biochar mediated electron transfer. The changes in the surface and structure of microplastics caused by various aging processes affected the pollutant attachment and subsequent removal efficiency. After chlorination, the highest disinfection by-product (DBP) generation potential was observed by the group of microplastics attached with TBBPA. The oxidation system of biochar activating peroxodisulfate (PDS) can not only reduce the kinds of DBPs, but also greatly reduce the total amount of detected DBPs by 76%, as well as reducing the overall toxicity. This paper highlights an overlooked contribution of pollutant attachment to the potential risks of DBP generated from natural microplastics during chlorination process, and provides the underlying insights to guide the design of a biochar-based catalyst from wastes to achieve the removal of TBBPA from microplastics and reduce the risks and hazards of co-contamination.

Deep eutectic solvents as promising pretreatment agents for sustainable lignocellulosic biorefineries: A review

Increasing reliance on non-renewable fuels has shifted research attention to environmentally friendly and sustainable energy sources.The inherently recalcitrant nature of lignocellulosic biomass (LCB) makes downstream processing of the bioprocess challenging. Deep eutectic solvents (DESs) are popular and inexpensive green liquids found effective for LCB valorisation. DESs have negligible vapor-pressure and are non-flammable, recyclable, cost-economic, and thermochemically stable. This review provides a detailed overview on the DESs types, properties and their role in effective delignification and enzymatic digestibility of polysaccharides for cost-effective conversion of LCB into biofuels and bioproducts. The conglomeration of DESs with assistive pretreatment techniques can augment the process of biomass deconstruction. The current challenges in upscaling the DESs-based pretreatment technology up to commercial scale is summarized, with possible solutions and future directions. These insights would fill the knowledge-gaps to towards development of lignocellulosic biorefineries and to address the global energy crisis and environment issues.

Adsorption behavior of Cr(VI) by biomass-based adsorbent functionalized with deep eutectic solvents (DESs)

This study was aimed to evaluate the performance of DESs functionalized peanut shell (PSD) as biosorbent for removing Cr(VI) from water. The effects of pretreatment, initial concentration, adsorption temperature, kinetics, adsorption isotherm, and thermodynamics were investigated. Scanning electron microscopy (SEM) and Point of Zero charge (pHpzc) techniques were used for characterization of the adsorbents. The results showed that the rigid structure of peanut shell was broken down after DESs modification and the point of zero charge was 6.02 for peanut shell and 6.84 for PSD, which exhibited a slightly acid character. Based on the comparisons of linear and nonlinear analysis of four kinetic models and four isotherms, the pseudo-second-order kinetic model was found to be suitable for describing the adsorption process. The presence of a boundary effect was observed within the range of research, indicating that internal diffusion was not the only rate-controlling step. The equilibrium data were well represented by the Langmuir model rather than the Freundlich, Temkin, and Dubinin–Radushkevich models. The maximum capacity derived was 5.36 mg g⁻¹. Changes in Gibb’s free energy, enthalpy, and entropy revealed that Cr(VI) adsorption onto modified peanut-shell powders was a spontaneous and endothermic process. However, the highest desorption efficiency was only 8.77% by using NaOH as a desorbing agent.

Mutual-activation between Zero-Valent iron and graphitic carbon for Cr(VI) Removal: Mechanism and inhibition of inherent Side-reaction

The low reactivity of zero-valent iron (ZVI) usually limits its application for pollutant remediation. Therefore, a microscopic galvanic cell (mGC) with short-circuited cathode and anode was synthesized to intensify its galvanic corrosion. The prepared mGC exhibited 7.14 times higher Fe(II) release performance than ordinary nanoscale-ZVI (nZVI), rendering efficient Cr(VI) removal performance. Density functional theory (DFT) revealed mutual-activation of the cathode and anode due to close proximity, dramatically enhancing the galvanic corrosion of Fe(0) in mGC. The corrosion potential of mGC was measured as -0.77 V, which was 100 mV more negative than nZVI. The released electrons and surface-bond Fe(II) from anode in mGC was proved to be the dominant reductive species. More importantly, Cr(VI) reduction was slightly inhibited by hydroxyl radicals generated by a series of inherent side-reactions in the system, which could be well eliminated by low concentrations of 4-acetamido phenol. This study provides a promising strategy for ZVI activation, and sheds light on its environmental applications.

Toward efficient dye degradation and the bactericidal behavior of Mo-doped La2O3 nanostructures

In this study, different concentrations (0, 0.02, 0.04, and 0.06 wt%) of Mo doped onto La2O3 nanostructures were synthesized using a one-pot co-precipitation process. The aim was to study the ability of Mo-doped La2O3 samples to degrade toxic methylene blue dye in different pH media. The bactericidal potential of synthesized samples was also investigated. The structural properties of prepared samples were examined by XRD. The observed XRD spectrum of La2O3 showed a cubic and hexagonal structure, while no change was recorded in Mo-doped La2O3 samples. Doping with Mo improved the crystallinity of the samples. UV-Vis spectrophotometry and density functional theory calculations were used to assess the optical characteristics of Mo-La2O3. The band gap energy was reduced while the absorption spectra showed prominent peaks due to Mo doping. The HR-TEM results revealed the rod-like morphology of La2O3. The rod-like network appeared to become dense upon doping. A significant degradation of MB was confirmed with Mo; furthermore, the bactericidal activities against S. aureus and E. coli were measured as 5.05 mm and 5.45 mm inhibition zones, respectively, after doping with a high concentration (6%) of Mo.

Role of sulfide-modified nanoscale zero-valent iron on carbon nanotubes in nonradical activation of peroxydisulfate

Sulfamethoxazole (SMX) is highly persistent and difficult to remove, making it urgent to find an efficient method for alleviating the enormous environmental pressure of SMX. In this study, sulfide-modified nanoscale zero-valent iron on carbon nanotubes (S-nZVI@CNTs) was prepared to activate peroxydisulfate (PDS) for the degradation of SMX. The results showed that SMX was completely removed within 40 min (k_obs=0.1058 min^-1) in the S-nZVI@CNTs/PDS system. By analyzing quenching experiments and electron paramagnetic resonance (EPR), singlet oxygen (¹O₂) was the main active species of the S-nZVI@CNTs/PDS system. ¹O₂ might be mediated by the abundant carbonyl groups (CO) on carbon nanotubes through spectroscopic analyses. In addition, sulfur doping transitioned the activation pathway to a nonradical pathway. Spectroscopic analyses and electrochemical experiments confirmed that the formation of CNTs-PDS complexes and S-nZVI could promote electron transfer on the catalyst surface. Furthermore, the main degradation intermediates of SMX were identified, and five possible transformation pathways were proposed. The S-nZVI@CNTs/PDS system possessed advantages including high anti-interference (Cl^-, NO^3-, HA), a strong applicability, recyclability and a low PDS consumption, offering new insight into the degradation of antibiotic wastewater.

Controlling the band structure and photocatalytic performance of single atom Ag/C3N4 catalysts by variation of silver concentration

We have investigated the effect of the concentration of single Ag atoms on the electronic structure of C3N4, and the relationship between the energy band structure and photocatalytic performance has been analysed in depth as well.