Fabrication of NH2-MIL-125(Ti) nanodots on carbon fiber/MoS2-based weavable photocatalysts for boosting the adsorption and photocatalytic performance

Modification of iron-containing silicate tailings with oxalic acid to develop a long-efficacy utilization peroxymonosulfate-based system for the efficient decomplexation and removal of Cr(III)-ethylenediamine tetraacetic acid

Ferrous oxalate (FeC2O4)-based composite has been recognized as an eminent catalyst for Cr(III)-ethylenediamine tetraacetic acid (Cr(III)-EDTA) decomplexation. However, their practical application has been limited by low cycling capacity and an ambiguous mechanism. In this research, a composite catalyst consisting of biotite loaded with nano FeC2O4 (CFS90) was prepared directly from iron-containing silicate tailing. The removal efficiency (91.3 %, kobs = 0.0185 min-1) of Cr(III)-EDTA by CFS90/peroxymonosulfate (PMS) system was remarkably higher than that of other typical systems. The Si site in biotite lost electrons while the electron cloud density around the Fe atom in FeC2O4 increased, which facilitates the activation of PMS and the generation of reactive oxygen species (ROS). In this system, abundant singlet oxygen (1O2) was primarily produced via interactions between carbon-centered radicals (CO2·-) and dissolved oxygen (DO), rather than through oxygen vacancies (Ovs) in CFS90. Both CO2·- and Fe(II) provided reducing conditions, preventing the released Cr(III) from being re-oxidized. Notably, the released Cr(III) was effectively precipitated by elevating the solution pH with NaOH, therefore endowing superior stability and deactivation capacity of CFS90 to enable its removal rate of Cr(III)-EDTA to remain above 84.1 % for 18 h in a fix-bed reactor. These findings provide an in-depth analysis of the enhanced Cr(III)-EDTA removal mechanism and highlight the environmental remediation potential of iron-containing silicate tailings.

NH2-MIL-125(Ti) and its functional nanomaterials - a versatile platform in the photocatalytic arena

Titanium (Ti)-based MOFs are promising materials known for their porosity, stability, diverse valence states, and a lower conduction band (CB) than Zr-MOFs. These features support stable ligand-to-metal charge transfer (LMCT) transitions under photoirradiation, enhancing photocatalytic performance. However, Ti-MOF structures remain a challenge owing to the highly volatile and hydrophilic nature of ionic Ti precursors. The discovery of MIL-125 marked a breakthrough in Ti-cluster coordination chemistry. Combining it with NH2 chromophores to form NH2-MIL-125 enhanced its structural design and extended its activity into the visible light region. This review delves into the high-performance photocatalytic properties of NH2-MIL-125, focusing on its applications in H2O2 and H2 production, CO2 and N2 reduction, drug and dye degradation, photocatalytic sensors, and organic transformation reactions. The discussion considers the influence of the Ti precursor, coordination environment, synthesis process, and charge transfer mechanisms. Numerous strategic methods have been discussed to improve the performance of NH2-MIL-125 by incorporating linker modification, metal node modification, encapsulation of active species, and post-modification for enhancing light absorption ability, promoting charge separation, and improving photocatalytic efficiency. Moreover, future perspectives include methods to investigate how the efficiency of NH2-MIL-125-based materials can be planned in promoting research by highlighting their versatility and potential impacts in the area of photocatalysis.

Growth of sulfur-doped bismuth oxybromide nanosheets on carbon fiber cloth for photocatalytically purifying antibiotic wastewater

Bismuth oxybromide (BiOBr) nanomaterials are well-known efficient powder-shaped photocatalyst for degrading antibiotic wastewater, but their practical applications have been limited by unsatisfactory photo-absorption, weak photocatalytic activity and poor recyclability. To address these issues, we demonstrate that the growing of S-doped BiOBr nanosheets on carbon fiber cloth (CFC) can lead to efficient photocatalysis with recyclable features. With carbon fiber cloth as the substrate, S-doped BiOBr (BiOBr-Sx) nanosheets (diameter: ∼500 nm, thicknesses: ∼5-90 nm) was prepared by solvothermal method with thiourea as dopant. With the increase of thiourea (0-0.2 g) in the precursor solution, BiOBr-Sx nanosheets exhibit a significant shift in the photo-absorption edge from 420 to 461 nm and decreased thicknesses from 90 to 5 nm, accompanying by the increased proportion of (010) exposed surface. Amony them, CFC/BiOBr-S0.5 can degrade various contaminants (such as 98.7 % levofloxacin (LVFX), 95.6 % ciprofloxacin (CIP) and 95.9 % tetracycline (TC)) with most degradation efficiency within 120 min of visible light irradiation, which are 1.6, 1.9 and 1.4 times than that of CFC/BiOBr (61.4 % LVFX, 49.5 % CIP and 67.1 % TC), respectively. Significantly, when CFC/BiOBr-S0.05 photocatalytic fabric is combined with a multi-stage flow device to treat the flowing wastewater (10 mg/L LVFX, rate: 1 L/h), 91.0 % LVFX can be degraded after tenth grade. Therefore, this study not only demonstrates the controllable preparation of S-doped BiOBr nanosheets with different thickness on CFC but also highlights the practical applications of fabric-based photocatalysts for purifying the flowing sewage efficiently.

N-doped titania nanoparticles containing Mo6 bromide and iodide clusters: Activity in photodegradation of rhodamine B and tetracycline

Contamination of water sources is a major environmental problem with far-reaching consequences for humanity. Organic substances are among the most widespread and persistent pollutants. Advanced oxidation processes, especially photocatalysis, have been considered as one of the most promising technologies for organic pollution control. In this study, hybrid photocatalysts based on N-doped TiO2, which exhibits activity in the visible region of the spectrum, and different content of octahedral Mo6 bromide and iodide cluster complexes were synthesized to achieve the highest efficiency of the formed S-scheme photocatalytic system under white light irradiation. According to the data obtained, the resulting materials are nanoparticles with a diameter of ∼10 nm exhibiting absorption up to ∼550 nm. Photocatalytic studies were performed using model organic molecules - the more colored rhodamine B (RhB) and the less colored antibiotic tetracycline (TET). The most active samples showed high efficiencies against both pollutants with keff ∼0.3-0.4 and 0.4-0.5 min-1, respectively, while the activity of iodide complexes was ∼1.3 times higher than that of bromide complexes. The stability of the catalysts is preserved for up to 5 cycles of TET photodegradation.

Boosted visible-light-induced photo-Fenton degradation of organic pollutants over a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl heterojunction catalyst

Improving the charge separation, charge transfer, and effective utilization is crucial in a photocatalysis system. Herein, we prepared a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl (Ti-MOF@FeOCl) composite photocatalyst through a simple method. The prepared composite catalyst was utilized in the photo-Fenton degradation of Rhodamine B (RhB) and ciprofloxacin (CIP). The Ti-MOF@FeOCl (10FeTi-MOF) catalyst exhibited the highest catalytic performance and degraded 99.1 and 66% of RhB and CIP, respectively. However, the pure NH2-MIL-125(Ti) (Ti-MOF) and FeOCl catalysts achieved only 50 and 92% of RhB and 50 and 37% of CIP, respectively. The higher catalytic activities of the Ti-MOF@FeOCl composite catalyst could be due to the electronic structure improvements, photoinduced charge separations, and charge transfer abilities in the catalyst system. The composite catalysts have also enhanced adsorption and visible light-responsive properties, allowing for efficient degradation. Furthermore, the electron paramagnetic resonance (EPR) signals, the reactive species trapping experiments, and Mott-Schottky (M - S) measurements revealed that the photogenerated superoxide radical (•O2-), hydroxyl radical (•OH), and holes (h+) played a vital role in the degradation process. The results also demonstrated that the Ti-MOF@FeOCl heterojunction composite catalysts could be a promising photo-Fenton catalyst system for the environmental remediation. Environmental implications The discharging of toxic contaminants such as organic dyes, antibiotics, and other emerging pollutants to the environment deteriorates the ecosystem. Specifically, the residues of organic pollutants recognized as a threat to ecosystem and a cause for carcinogenic effects. Among them, ciprofloxacin is one of antibiotics which has biological resistance, and metabolize partially in the human or animal bodies. It is also difficult to degrade ciprofloxacin completely with traditional treatment methods. Similarly, organic dyes are also toxic and a cause for carcinogenic effects. Therefore, effective degradation of organic pollutants such as RhB and ciprofloxacin with appropriate method is crucial.

Performance and applications of ZnO/pyrolusite composite particle electrode

In this research, we employed a synergistic three-dimensional (3D)-electrode technology in combination with a photocatalytic method to effectively treat wastewater containing chlorine derived from sulfonated phenolic resin (SMP). To modulate the band gap of single ZnO through semiconductor compounding, we successfully synthesized a ZnO/pyrolusite composite particle electrode on the surface of a pyrolusite particle electrode via a hydrothermal method. By incorporating MnO2 into pyrolusite, the ZnO band gap was modified, leading to a reduction in bandwidth of approximately 1.21 eV compared to pristine ZnO. Consequently, the light absorption range of the material was significantly broadened. Through the synergistic effect of photocatalysis, we achieved an impressive 96.45% removal rate of chemical oxygen demand (COD) in SMP wastewater, which effectively enhanced the photocatalytic performance of the material. Furthermore, our quenching experimental study confirmed the involvement of active chlorine species (ACl: Cl2, HClO, and ClO-), OH, h+, and O2- in the degradation process of SMP within the photocatalytic system constructed by the ZnO/pyrolusite composite particle electrode. The relative contributions were ranked as follows: ACl > h+ > ·OH > ·O2-.

Molybdenum disulphide nanoparticles accelerate the transformation of levofloxacin in planting soil upon exposure

The use of nanocatalytic particles for the removal of refractory organics from wastewater is a rapidly growing area of environmental purification. However, little has been done to investigate the effects of nanoparticles on soil-plant systems with antibiotic contamination. This work assessed the effect of molybdenum disulfide (MoS2) on the soil-Phragmites communis system containing levofloxacin (LVX). The results showed that the addition of MoS2 had restoration potential for stressed plant. The MoS2 with catalytic activity promoted the transformation of LVX in rhizosphere soils. The transformation pathways of LVX in the different exposure groups were proposed. The continuous output of radicals in the high MoS2 dosage group facilitated the transformation of LVX to small molecule compounds, which were eventually mineralized. Moreover, the electron-density-difference analysis revealed the easier flow of electrons from the MoS2 surface towards the LVX molecules. This finding provides theoretical support for the application of nanocatalytic particles in ecological environments.

Photocatalytic Optical Hollow Fiber with Enhanced Visible-light-driven CO2 Reduction

A visible-light-driven CO2 reduction optical fiber is fabricated using graphene-like nitrogen-doped composites and hollow quartz optical fibers to achieve enhanced activity, selectivity, and light utilization for CO2 photoreduction. The composites are synthesized from a lead-based metal-organic framework (TMOF-10-NH2) and g-C3N4 nanosheet (CNNS) via electrostatic self-assembly. The TMOF-10-NH2/g-C3N4 (TMOF/CNNS) photocatalyst with an S-type heterojunction is coated on optical fiber. The TMOF/CNNS coating, which has a bandgap energy of 2.15 eV, has good photoinduced capability at the coating interfaces, high photogenerated electron-hole pair yield, and high charge transfer rate. The conduction band potential of the TMOF/CNNS coating is more negative than that for CO2 reduction. Moreover, TMOF facilitates the CO desorption on its surface, thereby improving the selectivity for CO production. High CO2 photoreduction and selectivity for CO production is demonstrated by the TMOF/CNNS-coated optical fiber with the cladding/core diameter of 2000/1000 µm, 10 wt% TMOF in CNNS, coating thickness of 25 µm, initial CO2 concentration of 90 vol%, and relative humidity of 88% RH under the excitation wavelength of 380-780 nm. Overall, the photocatalytic hollow optical fiber developed herein provides an effective and efficient approach for the enhancement of light utilization efficiency of photocatalysts and selective CO2 reduction.

Highly Sensitive Weaving Sensor of Hybrid Graphene Nanoribbons and Carbon Nanotubes for Enhanced Pressure Sensing Function

Carbon nanotubes (CNTs) hold great promise in next-generation sensors because of their remarkable physical properties. Yet, maintaining precise stacking configurations of CNTs to make full use of their remarkable properties is challenging because of their susceptibility to spontaneous reconstruction. Inspired by the weaving technology, we propose a CNT-graphene nanoribbon hybrid woven model that can maintain the specific structure of CNTs to achieve their elaborately designed function. In this study, comprehensive molecular dynamics simulations are carried out to investigate the thermal stability of the CNT-graphene hybrid woven model, as well as their potential for pressure sensing applications by utilizing the unique response of thermal transport to mechanical deformation at heterojunctions. The thermal stability is sensitive to the size of the graphene nanoribbon, and the woven structure remains stable from 200-500 K when its width is greater than 2.0 nm. Moreover, it is exciting that the sensors are effective at predicting the shapes of externally loaded objects through the analysis of the thermal conductivity distribution, which can be derived from the relationship between the thermal conduction and the pressure. Our findings shed light on the bottom-up functional design of nanomaterials and expand wider applications of high-performance nanosensors in other related fields.

A floating photocatalytic fabric integrated with a AgI/UiO-66-NH2 heterojunction as a facile strategy for wastewater treatment

With an increased need of wastewater treatment, application of photocatalysts has drawn growing research attention as an advanced water remediation strategy. Herein, a floating photocatalytic fabric in a woven construction was developed for removal of Rhodamine B (RhB) in water. For an efficient photocatalytic reaction, AgI nanoparticles were grown on the surface of UiO-66-NH2 crystals in a layered structure, forming a heterojunction system on a cotton yarn, and this was woven with polypropylene yarn. The floating photocatalyst demonstrated the maximized light utilization and adequate contact with contaminated water. Through the heterojunction system, the electrons and holes were effectively separated to generate reactive chemical species, and this eventually led to an enhanced photocatalytic performance of AgI/UiO@fabric reaching 98% removal efficiency after 2 hours of irradiation. Photodegradation of RhB occurred mainly by superoxide radicals and holes, which were responsible for de-ethylation and decomposition of an aromatic ring, respectively. The kinetics of the photocatalytic reaction suggested that circulation of solution by stirring affected the photocatalytic removal rate. The recycle test demonstrated the potential long-term applicability of the developed material with structural integrity and catalytic stability. This study highlights the proof-of-concept of a floating photocatalytic material for facile and effective water remediation with repeated usability.

MOF-Based Photocatalytic Membrane for Water Purification: A Review

Photocatalytic membranes can effectively integrate membrane separation and photocatalytic degradation processes to provide an eco-friendly solution for efficient water purification. It is of great significance to develop highly efficient photocatalytic membranes driven by visible light to ensure the long-term stability of membrane separation systems and the maximum utilization of solar energy. Metal-organic framework (MOF) is an emerging photocatalyst with a well-defined structure and tunable chemical properties, showing a broad application prospect in the construction of high-performance photocatalytic membranes. Herein, this work provides a comprehensive review of recent advancements in MOF-based photocatalytic membranes. Initially, this work outlines the main tailoring strategies that facilitate the enhancement of the photocatalytic activity of MOF-based photocatalysts. Next, this work introduces commonly used methods for fabricating MOF-based photocatalytic membranes. Subsequently, this work discusses the application and mechanisms of MOF-based photocatalytic membranes toward organic pollutant degradation, metal ion removal, and membrane fouling mitigation. Finally, challenges in developing MOF-based photocatalytic membranes and their practical applications are presented, while also pointing out future research directions toward overcoming these existing limitations.

S-scheme MOF-on-MOF heterojunctions for enhanced photo-Fenton Cr(VI) reduction and antibacterial effects

The photocatalytic efficiency is commonly restrained by inferior charge separation rate. Herein, the S-scheme MIL-100(Fe)/NH2-MIL-125(Ti) (MN) photo-Fenton catalyst with the built-in electric field (BEF) was successfully constructed by a simple ball-milling technique. As a result, the MN-3 (the mass ratio of MIL-100(Fe) to NH2-MIL-125(Ti) was 3) composite presented the best visible-light-induced photocatalytic ability, in contrast to pure MIL-100(Fe) and NH2-MIL-125(Ti). The reduction efficiency of Cr(VI) almost reached 100% within 35 min of illumination. Moreover, the MN-3 heterojunction also exhibited the highest antibacterial activity, and about 100% E. coli and more than 90% S. aureus were killed within 60 min of illumination. In photo-Fenton system, In the photo-Fenton system, e-, O2•- and Fe2+ played vital roles for Cr(VI) reduction, and •OH, h+ and O2•- and 1O2 were responsible for sterilization. Additionally, 5 cyclic tests and relevant characterizations confirmed the excellent repeatability and stability of the composite. Also, the S-scheme charge transfer process was put forward. This work offers a novel idea for establishing the MOF-on-MOF photo-Fenton catalyst for high-efficiency environmental mitigation.

Recent progress in 1D MOFs and their applications in energy and environmental fields

Metal organic frameworks (MOFs) are porous coordination polymers with adjustable nanostructure, high porosity and large surface areas. These features make MOFs, their derivates and composites all delivered remarkable potential in energy and environmental fields, such as rechargeable batteries, supercapacitors, catalysts, water purification and desalination, gas treatment, toxic matter degradation, etc. In particular, one-dimensional (1D) MOFs have generated extensive attention due to their unique 1D nanostructures. To prepare 1D MOF nanostructures, it is necessary to explore and enhance synthesis routes. In this review, the preparation of 1D MOF materials and their recent process applied in energy and environmental fields will be discussed. The relationship between MOFs' 1D morphologies and the properties in their applications will also be analyzed. Finally, we will also summary and make perspectives about the future development of 1D MOFs in fabrication and applications in energy and environmental fields.

A photocatalytic-microbial coupling system for simultaneous removal of harmful algae and enhanced denitrification: Construction, performance and mechanism of action

Recently, harmful algal blooms (HABs) have become occurred with increasingly frequency worldwide. High nitrate content is one of the primary causes of eutrophication. Research has shown that photocatalytic materials enhance the effectiveness of microbial denitrification while removing other contaminants, despite some shortcomings. Based on this, we loaded TiO2/C3N4 heterojunctions onto weaveable, flexible carbon fibers and established a novel photocatalytically enhanced microbial denitrification system for the simultaneous removal of harmful algae and Microcystin-LR. We found that 99.35% of Microcystis aeruginosa and 95.34% of MC-LR were simultaneously and effectively removed. Compared to existing denitrification systems, the nitrate removal capacity improved by 72.33%. The denitrifying enzyme activity and electron transport system activity of microorganisms were enhanced by 3.54-3.86 times. Furthermore, the microbial community structure was optimized by the regulation of photogenerated electrons, and the relative abundance of main denitrifying bacteria increased from 50.72% to 66.45%, including Proteobacteria and Bacteroidetes. More importantly, we found that the increased secretion of extracellular polymeric substances by microorganisms may be responsible for the persistence of the reinforcing effect caused by photogenerated electrons in darkness. The higher removal of Microcystis aeruginosa and Microcystin-LR (MC-LR) achieved by the proposed system would reduce the frequency of HAB outbreaks and prevent the associated secondary pollution.

Evaluation of the photodegradation activity of bismuth oxoiodide/bismuth sub-carbonate nanocatalyst: Experimental design and the mechanism study

In this study, a binary BiOI/(BiO)2CO3 catalyst was prepared and used for sulfasalazine (SSZ) photodegradation in an aqueous phase. The semiconductors were identified by XRD, SEM-EDX, and UV-Vis diffuse reflectance spectroscopy (DRS) methods. Applying the Kubelka-Munk model on DRS results, the band gap energies of 2.09, 3.5, and 2.07 eV were obtained for BiOI, (BiO)2CO3, and BiOI/(BiO)2CO3 samples. pHpzc values of 6.3, 10.1, and 8.1 were estimated for BiOI, (BiO)2CO3, and BiOI/(BiO)2CO3, respectively. After observing the boosted photocatalytic activity by the coupled system, the interaction effects of the influencing variables in SSZ photodegradation were evaluated via the response surface methodology (RSM) approach. The optimal RSM-run conditions were 8.5 ppm SSZ at pH 8, which contained 0.28 g/L of the BiOI/(BiO)2CO3 catalyst and 29 min illumination time, resulting in 87% SSZ photodegradation. The effects of some scavenging agents were also studied to elucidate the relative roles of the reactive species in the SSZ photodegradation by the proposed catalyst, that is, hydroxyl radicals ∼ photoinduced electrons > superoxide radicals ∼ photoinduced holes. The proposed catalyst retained good activity after 5 successive reusing runs.

Investigation of photocatalytic-proxone process performance in the degradation of toluene and ethyl benzene from polluted air

In this study, toluene and ethylbenzene were degraded in the photocatalytic-proxone process using BiOI@NH₂-MIL125(Ti)/Zeolite nanocomposite. The simultaneous presence of ozone and hydrogen peroxide is known as the proxone process. Nanocomposite Synthesis was carried out using the solvothermal method. Inlet airflow, ozone concentrations, H₂O₂ concentrations, relative humidity, and initial pollutants concentrations were studied. The nanocomposite was successfully synthesized based on FT-IR, BET, XRD, FESEM, EDS element mapping, UV-Vis spectra and TEM analysis. A flow rate of 0.1 L min^-1, 0.3 mg min^-1 of ozone, 150 ppm of hydrogen peroxide, 45% relative humidity, and 50 ppmv of pollutants were found to be optimal operating conditions. Both pollutants were degraded in excess of 95% under these conditions. For toluene and ethylbenzene, the synergistic of mechanisms effect coefficients were 1.56 and 1.76, respectively. It remained above 95% efficiency 7 times in the hybrid process and had good stability. Photocatalytic-proxone processes were evaluated for stability over 180 min. The remaining ozone levels in the process was insignificant (0.01 mg min^-1). The CO₂ and CO production in the photocatalytic-proxone process were 58.4, 5.7 ppm for toluene and 53.7, and 5.5 ppm for ethylbenzene respectively. Oxygen gas promoted and nitrogen gas had an inhibitory effect on the effective removal of pollutants. During the pollutants oxidation, various organic intermediates were identified.

Performance of a membrane fabricated from high-density polyethylene waste for dye separation in water

Industrial growth can have a good impact on a country's economic growth, but it can also cause environmental problems, including water pollution. About 80% of industrial wastewater is discharged into the environment without treatment, of which 17-20% is dominated by dyes, such as methylene blue (MB) and methyl orange (MO) from the textile industry. Only about 5% of a textile dye is used in the dyeing process and the rest is discarded. This problem, of course, requires special handling considering the harmful effects to health. On the other hand, the abundance of plastic waste is increasing by 14% or 85 000 tons per year. This problem must be solved due to its film-forming properties. High-density polyethylene (HDPE) is one type of plastic used as a membrane material. Therefore, in this study, HDPE plastic waste was utilized as a membrane for dye removal. In this study, HDPE plastic waste was fabricated via a thermal-induced phase-separation method using mineral oil as a solvent at various concentrations of 8%, 10%, 13%, and 15% (w/w). All the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and contact angle measurements. The results showed that the HDPE membrane at a concentration of 15% displayed the best performance compared to the others in terms of MB rejection. The negative charge (-36.9) of the HDPE membrane was more effective for cationic dye removal compared to the anionic dye. The flux and rejection of HDPE 15% for 100 ppm MB and MO removal were 2.71 and 4.93 L m-2 h-1, and 99.72% and 89.8%, respectively. The pure water flux of the membrane was 15.01 L m-2 h-1 and the tensile strength was 0.3435 MPa.

Photocatalytic reduction of Cr(VI) via surface modified g-C3N4 by acid-base regulation

Cr(VI) is a class of highly toxic heavy metals. In this study, alkali-modified g-C₃N₄ (cOH-CN) and acid-modified g-C₃N₄ (cH-CN) materials were successfully synthesized, and their photocatalytic activities for Cr(VI) reduction under visible light irradiation were tested. Owing to defect structures by cH-CN and -OH group introduction by cOH-CN, the modified materials exhibited a larger surface area, more abundant pore structures, a wider visible light absorption range, higher energy gap values, and a stronger capacity for electron-hole pair separation. As a result, satisfactory Cr(VI) reduction performance was gained by these two photocatalysts. Almost all Cr(VI) was converted to Cr(III) after 60 min of treatment in the presence of these two catalysts, while it was only 30% for the pristine g-C₃N₄ materials. Relatively higher dosages of cH-CN and cOH-CN and acidic conditions both improved Cr(VI) reduction in the cH-CN and cOH-CN photocatalytic systems. Cr(VI) reduction was mainly initiated by free electrons in the photocatalytic system of the modified materials. Finally, Cr(VI) in the photocatalytic system was almost completely converted to Cr(III). Furthermore, the stability and recycling of the cH-CN and cOH-CN catalysts were evaluated.

Synthesis of BiOI@NH2-MIL125(Ti)/Zeolite as a novel MOF and advanced hybrid oxidation process application in benzene removal from polluted air stream

One of the popular process in volatile organic compounds removal in gas phase is advanced oxidation process. We in this research, synthesized BiOI@NH2-MIL125(Ti)/Zeolite nanocomposite as a novel nanocomposite to degradation of benzene in hybrid advanced oxidation process. The nanocomposite synthesized via solvothermal method. The effect of airflow, ozone gas concentration, hydrogen peroxide concentration, relative humidity and initial benzene concentration are the main parameters in the UV/O3/H2O2/ nanocomposite hybrid process that were studied. The characterization by XRD, FT-IR, FESEM, EDS element mapping, TEM, BET, and UV-vis spectra indicated that nanocomposite were well synthesized. Optimal operating conditions of the process were determined at air flow of 0.1 l/min, ozone concentration of 0.3 mg/min, hydrogen peroxide concentration of 150 ppm, relative humidity of 45 ± 3% and benzene concentration of 50 ppmv. Under these conditions, more than 99% of benzene was degraded. The synergistic effect coefficient of the mechanisms is 1.53. The nanocomposite had good stability in the hybrid process and remained above 99% efficiency up to 5 times. The ozone concentration residual the system was reported to be negligible (0.013 mg/min). The CO and CO2 emissions in the hybrid process was higher than other processes, which indicates better mineralization in the hybrid process. Formaldehyde, octane, noonan, phenol, decanoic acid were reported as the main by-products. The results indicated that UV/O3/H2O2/ nanocomposite hybrid process has fantastic efficiency in the degradation of benzene as one of the indicators of VOCs.

Fabrication of hydrangea-shaped Bi2WO6/ZIF-8 visible-light responsive photocatalysts for degradation of methylene blue

In this paper, the hydrangea-shaped Bi₂WO₆/ZIF-8 (BWOZ) visible light photocatalysts have been prepared via a facile synthetic strategy for the first time. The constructed BWOZ composites were systematically studied by a series of characterization techniques. The SEM results manifested the octahedral ZIF-8 coated the flower-like Bi₂WO₆ uniformly and the composition of BWOZ composites had been confirmed by XPS measurement. And the photocatalytic activity was evaluated by eliminating methylene blue with the help of visible light. The results showed that 7%-BWOZ (7.0 wt% Bi₂WO₆) exhibited better photodegradation capability than pure Bi₂WO₆ and ZIF-8. Compared with Bi₂WO₆, the photocatalytic degradation of methylene blue by 7%-BWOZ could reach 85.7%. In addition, the pseudo-first-order kinetic constant of 7%-BWOZ was 23.00 and 1.61 times that of pristine Bi₂WO₆ and ZIF-8, respectively. The improved photocatalytic ability of BWOZ systems may be due to the construction of heterojunctions between Bi₂WO₆ and ZIF-8, which resulted in the rapid separation of photogenerated carriers. Additionally, the specific surface area of the formed BWOZ system was also improved in comparison with the flower-shaped Bi₂WO₆, and thus more active sites could be provided to contact with methylene blue molecules, thereby achieving better removal capacity. Moreover, trapping experiments and electron spin resonance results further illustrated that the coexistence of multiple free radicals realized efficient degradation of methylene blue. More importantly, the photocatalytic property of the 7%-BWOZ composite remained even after three cycles. Furthermore, a feasible photodegradation mechanism was also explored in depth.

Construction of MIL-125-NH2@BiVO4 Composites for Efficient Photocatalytic Dye Degradation

The design and construction of a photocatalyst with a heterostructure are a feasible and effective way to enhance the catalytic performance. Herein, a specially designed composite based on MIL-125-NH₂ and BiVO₄ was prepared and used for wastewater treatment. In the hybrid MIL-125-NH₂@BiVO₄, MIL-125-NH₂ was uniformly dispersed on the BiVO₄ surface. There is a high affinity between MIL-125-NH₂ and BiVO₄ due to the lattice defects. Under visible light irradiation, the catalytic activity of the as-prepared composite was evaluated by the degradation of various dyes such as malachite green, crystal violet, methylene blue, and Congo red. Nearly 98.7, 99.1, and 41.0% of the initial MG, MB and Cr(VI) were respectively removed over the optical sample of BVTN-5, demonstrating that the hybrid holds great promise for practical applications. Moreover, the composites can be recycled and reused with good stability after five consecutive cycles. The mechanism was proposed and discussed in detail. This work will shed light on the construction of MOF-based composites for efficient photocatalysis.