Brominated flame retardants coated separators for high-safety lithium-sulfur batteries

Non-consumable gamma-cyclodextrin additive constructing anti-solvation interphase realizing dendrites free and high-performance lithium metal batteries

Relying on surpassing high theoretical capacity (3,865 mAh/g) and the lowest relative electrode potential (0 V vs. metallic Li), lithium metal batteries (LMBs) have been regarded as the "holy grail" of next-generation energy storage technology. Whereases, the instability of pristine solid electrolyte interphase (SEI) layers and the disorderly growth of lithium dendrites are still significant challenges to the commercialisation of LMBs. In this study, a novel approach is introduced to homogenise Li deposition by incorporating an environmentally friendly electrolyte additive, gamma-cyclodextrin (γ-CD), in ether-based electrolytes. Through host-guest interactions, γ-CD additives not only form inclusion complexes to improve Li+ transference number to 0.86 but also encapsulate TFSI- anions and other solvent molecules within the "cavity effect" to relieve unfavourable solvent effect. Electrochemical characterisations demonstrate that introducing 1 wt% γ-CD elevates the oxidation decomposition voltage of ether electrolytes to 4.15 V, thereby inhibiting the decomposition of ether electrolytes and reducing the fracture of SEI layers. According to reduce the nucleate potential, the Li//Cu half battery exhibits improved stability for 100 cycles, with an improved average Coulombic efficiency (CE) maintained above 98.4 %. Even if applied at high current densities of 5.0 mA cm-2 for a capacity of 1.0 mAh cm-2, the Li//Li symmetric battery can cycle for over 800 h, and the Li//Li4Ti5O12 (LTO) full battery retains 98.8 % of the initial capacity after 1,400 cycles.

Versatile Separators Toward Advanced Lithium-Sulfur Batteries: Status, Recent Progress, Challenges and Perspective

Lithium-sulfur batteries (LSBs) have recently gained extensive attention due to their high energy density, low cost, and environmental friendliness. However, serious shuttle effect and uncontrolled growth of lithium dendrites restrict them from further commercial applications. As "the third electrode", functional separators are of equal significance as both anodes and cathodes in LSBs. The challenges mentioned above are effectively addressed with rational design and optimization in separators, thereby enhancing their reversible capacities and cycle stability. The review discusses the status/operation mechanism of functional separators, then primarily focuses on recent research progress in versatile separators with purposeful modifications for LSBs, and summarizes the methods and characteristics of separator modification, including heterojunction engineering, single atoms, quantum dots, and defect engineering. From the perspective of the anodes, distinct methods to inhibit the growth of lithium dendrites by modifying the separator are discussed. Modifying the separators with flame retardant materials or choosing a solid electrolyte is expected to improve the safety of LSBs. Besides, in-situ techniques and theoretical simulation calculations are proposed to advance LSBs. Finally, future challenges and prospects of separator modifications for next-generation LSBs are highlighted. We believe that the review will be enormously essential to the practical development of advanced LSBs.

Recent Progress of Advanced Functional Separators in Lithium Metal Batteries

As a representative in the post-lithium-ion batteries (LIBs) landscape, lithium metal batteries (LMBs) exhibit high-energy densities but suffer from low coulombic efficiencies and short cycling lifetimes due to dendrite formation and complex side reactions. Separator modification holds the most promise in overcoming these challenges because it utilizes the original elements of LMBs. In this review, separators designed to address critical issues in LMBs that are fatal to their destiny according to the target electrodes are focused on. On the lithium anode side, functional separators reduce dendrite propagation with a conductive lithiophilic layer and a uniform Li-ion channel or form a stable solid electrolyte interphase layer through the continuous release of active agents. The classification of functional separators solving the degradation stemming from the cathodes, which has often been overlooked, is summarized. Structural deterioration and the resulting leakage from cathode materials are suppressed by acidic impurity scavenging, transition metal ion capture, and polysulfide shuttle effect inhibition from functional separators. Furthermore, flame-retardant separators for preventing LMB safety issues and multifunctional separators are discussed. Further expansion of functional separators can be effectively utilized in other types of batteries, indicating that intensive and extensive research on functional separators is expected to continue in LIBs.

In Situ Growth Strategy to Construct "Four-In-One" Separators with Functionalized Polyphosphazene Coatings for Safe and Stable Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) are facing many challenges, such as the inadequate conductivity of sulfur, the shuttle effect caused by lithium polysulfide (LiPSs), lithium dendrites, and the flammability, which have hindered their commercial applications. Herein, a "four-in-one" functionalized coating is fabricated on the surface of polypropylene (PP) separator by using a novel flame-retardant namely InC-HCTB to meet these challenges. InC-HCTB is obtained by cultivating polyphosphazene on the surface of carbon nanotubes with an in situ growth strategy. First, this unique architecture fosters an enhanced conductive network, bolstering the bidirectional enhancement of both ionic and electronic conductivities. Furthermore, InC-HCTB effectively inhibits the shuttle effect of LiPSs. LSBs exhibit a remarkable capacity of 1170.7 mA h g-1 at 0.2 C, and the capacity degradation is a mere 0.0436% over 800 cycles at 1 C. Third, InC-HCTB coating serves as an ion migration network, hindering the growth of lithium dendrites. More importantly, InC-HCTB exhibits notable flame retardancy. The radical trapping action in the gas phase and the protective effect of the shielded char layer in the condensed phase are simulated and verified. This facile in situ growth strategy constructs a "four-in-one" functional separator coating, rendering InC-HCTB a promising additive for the large-scale production of safe and stable LSBs.

Intrinsic Flame Retardancy and Flexible Solid-Solid Phase Change Materials with Self-Healing and Recyclability

Conventional polymeric phase change materials (PCMs) have been widely used due to their high heat storage density, small temperature variation, and nontoxicity. However, the high flammability and unrecyclable problems restrict their applications in energy storage devices (ESDs). Although it is facile to introduce a flame retardant into phase change materials to improve fire resistance, the physical blending will deteriorate the mechanical performance and thermal stability of PCMs. Herein, flame-retardant solid-solid PCMs (FRPCMs) with intrinsic flame retardancy, phase change property, self-healing, and recyclability were synthesized by simultaneously integrating tetrabromobisphenol A (TBBPA) and poly(ethylene glycol) (PEG) into polyurethane network skeletons. PEG ingredients acted as phase change materials, and TBBPA not only worked as an efficient flame retardant but also provided dynamic covalent bonds for thermally induced self-healing and recyclability. FRPCMs possess the highest latent heat of 124.7 J/g, high self-healing ability, and high thermal reliability and recyclability. Besides, with the introduction of TBBPA, the limiting oxygen index (LOI) value and char residue significantly increased, the heat release rate (HRR) and total heat release (THR) values decreased, and most of the FRPCMs reached UL94 V-2 rating as well. Hence, the synthesized FRPCMs could expand the application scope of PCMs for thermal energy storage.