Noble metal-free FeCoNiMnV high entropy alloy anchored on N-doped carbon nanotubes with prominent activity and durability for oxygen reduction and zinc-air batteries

Breaking the symmetry and d-orbital optimization at Co site in CoNC as bifunctional air catalysts for rechargeable liquid and flexible solid-state Zn-air batteries

By utilizing abundant earth metals and incorporating them into N-doped carbon electrocatalysts, the electrochemical kinetics and stability of oxygen reactions in zinc-air batteries (ZABs) are enhanced. However, several challenges remain. We introduce a method that focuses on microenvironmental modulation to precisely adjust the Cr-doped Co NC (Cr-Co NC) catalyst, thereby enhancing its inherent electrochemical activity and durability, and improving the oxygen reaction process. The unique Cr-N-Co configuration in the Cr-CoNC-1.00 catalyst weakens the adsorption strength of *OH intermediates by engineering the Co d-band center, thus lowering the energy barrier for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). The precisely engineered Cr-CoNC-1.00 catalyst demonstrates robust ORR and OER performance, achieving an ORR half-wave potential (E1/2) of 0.865 V and an OER overpotential (EJ=10) of 1.64 V (vs RHE), rivaling that of noble-metal catalysts (Pt/C for ORR and RuO2 for OER). In practical applications, the rechargeable liquid ZABs equipped with Cr-CoNC-1.00 delivered exceptional results (peak power density: 110 mW·cm-2, specific capacity: 816 mA·h·g-1 Zn at 10 mA·cm-2, with over 208 h of charge-discharge cycle stability). Additionally, the flexible solid-state ZABs achieved an open-circuit voltage of 1.4 V, demonstrated remarkable charge-discharge stability for over 12 h, and maintained performance under various bending conditions. This approach highlights the significant potential for developing high-efficiency bifunctional catalysts suitable for flexible zinc-air batteries.

Tailoring N and S Heteroatoms Through Rational Design in Carbon Nanotubes-Graphene Composites for Enhanced Zn-Air Battery Performance

Cathodic materials significantly influence the performance, durability, and sustainability of primary zinc-air batteries (ZABs). This study focuses on the rational design of highly active metal-free composites by tailoring the content of N and S heteroatoms in carbon nanotube-graphene (CNTG) composites. The oxygen reduction reaction (ORR) tests showed onset potentials (Eo) of 0.88 V (N-CNT) and 0.89 V (N-graphene) for individual materials and 0.92 V for the N-CNTG composite, highlighting the advantage of using a composite materialThe N content varied with dicyandiamide and urea, displaying changes in the surface area and N content (7.09 vs. 5.30 at. %), and in pyridinic and quaternary N species. The N content varied with dicyandiamide and urea, showing changes in the surface area and N content (7.09 vs. 5.30 at. %), and in pyridinic and quaternary N species. The abundance of pyridinic-N species in N-CNTG using urea enabled a higher ORR activity (Eo=0.92 V). The S incorporation through thiourea improved the Eo to 0.94 V (Pt/C=1.03 V). And, the combination of urea and thiourea resulted in a highly active and durable N,S-CNTG material, displaying a Eo of 0.96 V, and an activity loss of 8.7 % (Pt/C=25.4 %) after 2000 cycles. In ZAB mode, this material displayed a voltage of 1.35 V, a power density of 107 mW cm-2, and a specific capacity of 1060 mA h g-1.

Nonequilibrium-corrosive engineering synthesis of Pt anchored on Fe3O4 with oxygen vacancy for efficient electrocatalytic hydrogen evolution reaction

The development of suitable support to maximize the atomic utilization efficiency of platinum is of great significance for the hydrogen evolution reaction (HER). Herein, we report a simple and fast nonequilibrium-corrosive approach to prepare oxygen defect-enriched Fe3O4 decorated with trace Pt onto nickel-iron foam (Pt/Fe3O4-Ov/NIF). The Pt/Fe3O4-Ov/NIF electrode is superhydrophilic with intimate contact with the electrolyte. In addition, the strong electronic interactions between Fe3O4 and Pt and the oxygen-rich vacancies contribute to the catalytic process and improve the electrochemical interfacial properties. Thus, the Pt/Fe3O4-Ov/NIF electrocatalyst only requires an overpotential of 29 and 39 mV at 10 mA cm-2 in alkaline freshwater/alkaline seawater, respectively, exhibiting superior HER activity. Furthermore, the anion exchange membrane water electrolyzer (AEMWE) owns low cell voltage of 1.86 V at 1000 mA cm-2 and long-term electrocatalysis durability. This work provides an effective approach for designing efficient AEMWE electrocatalysts for hydrogen production.

High-performance rechargeable zinc-air batteries enabled by cobalt iron anchored on nitrogen-doped carbon matrix as bifunctional electrocatalyst

Developing efficient bifunctional oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) electrocatalysts is potential ways for achieving high rechargeable zinc-air (Zn-air) battery performance. Herein, we report an iron (II) acetate-assisted strategy to synthesize Co3Fe7-NC-OAc catalyst with cobalt iron (Co3Fe7) alloy anchored on nitrogen-doped carbon (NC) matrix, which can serve as efficient ORR/OER bifunctional electrocatalysts for rechargeable Zn-air batteries. Apart from alloying with Co to form ORR/OER active Co3Fe7 nanoparticles, the incorporation of iron (II) acetate has expanded the pore size inside the Co3Fe7-NC-OAc catalyst to serve as gas transfer channels, and has induced synergetic electronic coupling between Co3Fe7 nanoparticles and NC matrix for boosting catalytic activity. Therefore, Co3Fe7-NC-OAc exhibits favorable ORR activity with a most positive half-wave potential of 0.90 V vs. RHE, fast ORR kinetics with a highest kinetic current density of 57.4 mA cm-2 at 0.85 V vs. RHE, and fast O2 diffusion and transport that enables smaller mass transport overpotential at high current density up to 800 mA cm-2. Additionally, Co3Fe7-NC-OAc can catalyze OER with low overpotential of 310 mV at 10 mA cm-2. When employed as air electrode for Zn-air batteries, Co3Fe7-NC-OAc achieve high peak power densities of 193 mW cm-2 and 587 mW cm-2 in liquid and solid-state Zn-air batteries. The liquid battery also exhibits high specific capacity and remarkable cycling performance. This work opens up a new opportunity for developing highly efficient bifunctional electrocatalysts for Zn-air battery applications.

Enhanced oxygen evolution and power density of Co/Zn@NC@MWCNTs for the application of zinc-air batteries

Rechargeable zinc-air batteries (ZABs) are viewed as a promising solution for electric vehicles due to their potential to provide a clean, cost-effective, and sustainable energy storage system for the next generation. Nevertheless, sluggish kinetics of the oxygen evolution reaction (OER), the oxygen reduction reaction (ORR) at the air electrode, and low power density are significant challenges that hinder the practical application of ZABs. The key to resolving the development of ZABs is developing an affordable, efficient, and stable catalyst with bifunctional catalytic. In this study, we present a series of bifunctional catalysts composed of Co/Zn nanoparticles uniformly embedded in nitrogen-doped carbon (NC) and multi-walled carbon nanotubes (MWCNTs) denoted as Co/Zn@NC@MWCNTs. The incorporation of MWCNTs using a facile and non-toxic method significantly decreased the overpotential of the OER from 570 to 430 mV at 10 mA cm-2 and the peak power density from 226 to 263 mW cm-2. Besides, the electrochemical surface area measurements and electrochemical impedance spectroscopy indicate that the three-dimensional (3D) network structure of MWCNTs facilitates mass transport for ORR and reduces electron transfer resistance during OER, leading to a small potential gap of 0.86 V between OER and ORR, high electron transfer number (3.92-3.98) of the ORR, and lowest Tafel slope (47.8 mV dec-1) of the OER in aqueous ZABs. In addition, in-situ Raman spectroscopy revealed a notable decrease in the ID/IG ratio for the optimally configured Co/Zn@NC@MWCNTs (75:25), indicating a reduction in defect density and improved structural ordering during the electrochemical process, which directly contributes to enhanced ORR activity. Hence, this study provides an excellent strategy for constructing a bifunctional catalyst material with a 3D MWCNTs conductive network for the development of advanced ZAB systems for sustainable energy applications.

Cu-NC single-atom nanozymes with peroxidase-like activity for colorimetric detection of d-penicillamine

Most conventional nanozymes have poor specificity and low activity, and designing high-performance nanozymes remains a challenge. In contrast, single-atom nanozymes have high atom utilization and high reactivity. Here, we prepared Cu single-atom nanozymes (Cu-NC) with excellent peroxidase-like activity by high-temperature pyrolysis using Cu as a transition metal source. The introduction of Cu formed the Cu-Nx active site, which accelerated charge transfer between the reactants and the active site and was the key for improving the activity. With Cu-NC as a catalyst, H2O2 rapidly oxidized 3,3',5,5'-tetramethylbenzidine (TMB) to oxTMB, and the solution turned blue with strong absorption at 652 nm. Because d-penicillamine (D-PA) can reduce oxTMB or react with reactive oxygen species radicals to inhibit the color reaction, we built a colorimetric sensing platform around Cu-NC for the determination of D-PA and successfully used it for the determination of D-PA in urine samples. This work provides new ideas for the design of high-performance nanozymes and the detection of D-PA in real environments.

Strain engineering of CoSANC catalyst toward enhancing the oxygen reduction reaction activity

Developing efficient and cost-effective platinum-group metal-free (PGMF) catalysts for the oxygen reduction reaction (ORR) is crucial for energy conversion and storage devices. Among these catalysts, metal-nitrogen-carbon (MNC) materials, particularly cobalt single-atom catalysts (CoSANC), show promise as ORR electrocatalysts. However, their ORR activity is often hindered by strong hydroxyl (OH) adsorption on the Co sites. While the impact of strain engineering on MNC electrocatalysts has been minimally explored, recent studies suggest its potential to enhance catalytic performance and optimize intrinsic activity in traditional bulk catalysts. In this context, we investigate the effect of surface strain on CoSANC for ORR activity and correlate substrate-strain-induced geometric distortions with catalytic activity using experimental and theoretical methods. The findings suggest that the d-band center gap of spin states (Δεd) may be a preferred descriptor for predicting strain-dependent ORR performance in MNC catalysts. Leveraging CoSANC moiety placed on a substrate with an average size of 1.0 μm, we achieve performance comparable to that of commercial Pt/C catalysts when used as a cathode catalyst in zinc-air batteries. This investigation unveils the structure-function relationship of MNC electrocatalysts regarding strain engineering and provides valuable insights for future ORR activity design and enhancement.

Low Rh doping accelerated HER/OER bifunctional catalytic activities of nanoflower-like Ni-Co sulfide for greatly boosting overall water splitting

Facile synthesis of high-efficiency and stable bifunctional electrocatalyst is essential for producing clean hydrogen in energy storage systems. Herein, low Rh-doped flower-like Ni3S2/Co3S4 heterostructures were facilely prepared on porous nickel foam (labeled Rh-Ni3S2/Co3S4/NF) by a hydrothermal method. The correlation of the precursors types with the morphological structures and catalytic properties were rigorously investigated for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in the control groups. The low Rh doping within the catalyst played important role in boosting the catalytic characteristics. The resulting catalyst showed the smaller overpotentials of 197 and 78 mV to drive a current density of 10 mA cm-2 for the OER and HER in alkaline electrolyte, respectively. And the potential only required 1.71 V to drive a current density of 100 mA cm-2 in a water splitting device. It reflects excellent overall water splitting of the home-made Rh-Ni3S2/Co3S4/NF. This strategy shed some constructive light for preparing transition metal sulfide-based electrocatalysts in water splitting devices.

Atomically dispersed ternary FeCoNb active sites anchored on N-doped honeycomb-like mesoporous carbon for highly catalytic degradation of 4-nitrophenol

In the last decades, 4-nitrophenol is regarded as one of highly toxic organic pollutants in industrial wastewater, which attracts great concern to earth sustainability. Herein, atomically dispersed ternary FeCoNb active sites were incorporated into nitrogen-doped honeycomb-like mesoporous carbon (termed FeCoNb/NHC) by a two-step pyrolysis strategy, whose morphology, structure and size were characterized by a set of techniques. Further, the catalytic activity and reusability of the as-prepared FeCoNb/NHC were rigorously examined by using 4-NP catalytic hydrogenation as a proof-of-concept model. The influence of the secondary pyrolysis temperature on the catalytic performance was investigated, combined by illuminating the catalytic mechanism. The resultant catalyst exhibited significantly enhanced catalytic features with a normalized rate constant (kapp) of 1.2 × 104 min-1g-1 and superior stability, surpassing the home-made catalysts in the control groups and earlier research. This study provides some constructive insights for preparation of high-efficiency and cost-effectiveness single-atom nanocatalysts in organic pollutants environmental remediation.

High-Entropy Alloys in Catalysis: Progress, Challenges, and Prospects

High-entropy alloys (HEAs) have become pivotal materials in the field of catalysis, offering unique advantages due to their diverse elemental compositions and complex atomic structures. Recent advances in computational techniques, particularly density functional theory (DFT) and machine learning (ML), have significantly enhanced our understanding and design of HEAs for use in catalysis. These innovative atomistic simulations shed light on the properties of HEAs, enabling the discovery and optimization of catalysis materials for solid-solution structures. This Perspective discusses recent studies that illustrate the progress of HEAs in catalysis. It offers an overview of the properties, constraints, and prospects of HEAs, emphasizing their roles in catalysis to enhance catalytic activity and selectivity. The discussion underscores the capabilities of HEAs as multifunctional catalysts with stable structures. The presented insights aim to inspire future computational and experimental efforts to address the challenges in fine-tuning HEAs properties for improved catalytic performance.

Oxygen doping regulation of Co single atom catalysts for electro-Fenton degradation of tetracycline

Electro-Fenton is an effective process for degrading hard-to-degrade organic pollutants, such as tetracycline (TC). However, the degradation efficiency of this process is limited by the activity and stability of the cathode catalyst. Herein, a temperature gradient pyrolysis strategy and oxidation treatment is proposed to modulate the coordination environment to prepare oxygen-doped cobalt monoatomic electrocatalysts (CoNOC). The CoNOC catalysts can achieve the selectivity of 93 % for H2O2 with an electron transfer number close to 2. In the H-cell, the prepared electrocatalysts can achieve more than 100 h of H2O2 production with good stability and the yield of 1.41 mol gcatalyst-1 h-1 with an average Faraday efficiency (FE) of more than 88 %. The calculations indicate that the epoxy groups play a crucial role in modulating the oxygen reduction pathway. The O doping and unique N coordination of Co single-atom active sites (CoN(Pd)3N(Po)1O1) can effectively weaken the O2/OOH* interaction, thereby promoting the production of H2O2. Finally, the electro-Fenton system could achieve a TC degradation rate of 94.9 % for 120 min with a mineralization efficiency of 87.8 % for 180 min, which provides a reliable option for antibiotic treatment. The significant involvement of OH in the electro-Fenton process was confirmed, and the plausible mineralization pathway for TC was proposed.

N-regulated three-dimensional turf-like carbon nanosheet loaded with FeCoNi nanoalloys as bifunctional electrocatalysts for durable zinc-air batteries

N-regulated three-dimensional (3D) turf-like carbon material loaded with FeCoNi nanoalloys (F-CNS-CNT), composed of carbon nanotubes (CNT) grown in situ on carbon nanosheets(CNS), was synthesized using a low-temperature solution combustion method and organic compounds rich in pyridinic-N. This distinct structure significantly expands the effective electrochemical surface area, revealing an abundance of active sites and enhancing the mass transfer capability for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Both experimental observations and theoretical calculations corroborate that the synergy between the FeCoNi nanoalloy and the highly pyridinic N-doped carbon substrate optimizes the adsorption and desorption-free energy of oxygen intermediates, resulting in a remarkable improvement of intrinsic ORR/OER activity. Therefore, the derived F-CNS-CNT electrocatalyst can present a favorable half-wave potential of 0.85 V (ORR) and a lower overpotential of 260 mV (corresponding to a current density of 10 mA cm-2, OER) in alkaline media. Moreover, when employed in the air cathode of a flowable zinc-air battery, the electrocatalyst exhibits exceptional discharge and charge performance, including a high power density of 144.6 mW cm-2, a high specific capacity of 801 mAh g-1, and an impressive cycling stability of 600 cycles at a current density of 10 mA cm-2. Notably, these results markedly surpass those of the commercial catalyst Pt/C + IrO2.

Coherent NiS2@SnS2nanosheet for accelerating electrocatalytic nitrate reduction to ammonia

The development of an effective and selective catalyst is the key to improving the multi-electron transfer nitrate reduction reaction (NO3-RR) to ammonia. Here, we synthesized a coherent NiS2@SnS2nanosheet catalyst loaded on carbon cloth via one-step solvothermal method. Experimental data reveals that the integration of NiS2and SnS2can enhance the NO3-RR performance in terms of high NH3yield rate of 408.2μg h-1cm-2and Faradaic efficiency of 89.61%, as well as satisfying cycling and long-time stability.

Simultaneous ionic cobalt sensing and toxic Congo red dye removal: a circular economic approach involving silver-enhanced fluorescence

A highly fluorescent quinone-capped silver hydrosol (AgOSA) was obtained using salicylaldehyde and an ionic silver solution. Such metal-enhanced fluorescence was efficiently quenched with Congo red dye (CR), producing CRAgOSA, due to the strong silver-sulfur interaction, replacing the capping of quinone (oxidized salicylaldehyde). The introduction of cobalt ions restored the fluorescence by engaging CR (CoCRAgOSA). Cobalt-induced fluorescence enhancement was 8.3 times higher than that of AgOSA due to the freeing of CR and the release of self-quenching of excess quinone molecules in CoCRAgOSA. The mammoth and selective fluorescence enhancement with ionic cobalt assisted in designing a turn-on ionic cobalt sensor with a limit of detection (LOD) of 9.4 × 10-11 M and a linear detection range (5 × 10-5 to 10-9 M). Moreover, toxic CR dye was eliminated by quinone-capped silver nanoparticles and Co2+ due to chemisorption. Not only the fluorimetric sensing of ionic cobalt but also the colorimetric sensing of Hg2+ was designed due to the simultaneous aggregation of AgNPs and complexation with CR induced by Hg2+ (LOD 1.36 × 10-5 M and linear detection range from 1.00 × 10-4 to 5 × 10-7 M). We applied our sensing method to estimate ionic cobalt and mercury in natural samples. The experiment was a unique case of circular economy, where a toxic dye was used for making a nanosensor.

Atomically dispersed bimetallic active sites as H2O2 self-supplied nanozyme for effective chemodynamic therapy, chemotherapy and starvation therapy

Tumor microenvironment (TME)-responsive chemodynamic therapy (CDT) is severely hindered by insufficient intracellular H2O2 level that seriously deteriorates antitumor efficacy, albeit with its extensively experimental and theoretical research. Herein, we designed atomically dispersed FeCo dual active sites anchored in porous carbon polyhedra (termed FeCo/PCP), followed by loading with glucose oxidase (GOx) and anticancer doxorubicin (DOX), named FeCo/PCP-GOx-DOX, which converted glucose into toxic hydroxyl radicals. The loaded GOx can either decompose glucose to self-supply H2O2 or provide fewer nutrients to feed the tumor cells. The as-prepared nanozyme exhibited the enhanced in vitro cytotoxicity at high glucose by contrast with those at less or even free of glucose, suggesting sufficient accumulation of H2O2 and continual transformation to OH for CDT. Besides, the FeCo/PCP-GOx-DOX can subtly integrate starvation therapy, the FeCo/PCP-initiated CDT, and DOX-inducible chemotherapy (CT), greatly enhancing the therapeutic efficacy than each monotherapy.

Nitrogen-Rich Covalent Organic Polymer for Metal-Free Tandem Catalysis and Postmetalation-Actuated High-Performance Water Oxidation

Development of high-performing catalytic materials for selective and mild chemical transformations through adhering to the principles of sustainability remains a central focus in modern chemistry. Herein, we report the template-free assembly of a thermochemically robust covalent organic polymer (COP: 1) from 2,2'-bipyridine-5,5'-dicarbonyl dichloride and 2,4,6-tris(4-aminophenyl)triazine as [2 + 3] structural motifs. The two-dimensional (2D) layered architecture contains carboxamide functionality, delocalized π-cloud, and free pyridyl-N site-decked pores. Such trifunctionalization benefits this polymeric network exhibiting tandem alcohol oxidation-Knoevenagel condensation. In contrast to common metal-based catalysts, 1 represents a one of a kind metal-free alcohol oxidation reaction via extended π-cloud delocalization-mediated free radical pathway, as comprehensively supported from diverse control experiments. In addition to reasonable recyclability and broad substrate scope, the mild reaction condition underscores its applicability in benign synthesis of valuable product benzylidene malononitrile. Integration of 2,2'-bipyridyl units in this 2D COP favors anchoring non-noble metal ions to devise 1-M (M: Ni2+/ Co2+) that demonstrate outstanding electrochemical oxygen evolution reaction in alkaline media with high chronoamperometric stability. Electrochemical parameters of both 1-Co and 1-Ni outperform some benchmark, commercial, as well as a majority of contemporary OER catalysts. Specifically, the overpotential and Tafel slope (280 mV, 58 mV/dec) for 1-Ni is better than 1-Co (360 mV, 78 mV/dec) because of increased charge accumulation as well as a higher number of active sites compared to the former. In addition, the turnover frequency of 1-Ni is found to be 6 times higher than that of 1-Co and ranks among top-tier water oxidation catalysts. The results provide valuable insights in the field of metal-free tandem catalysis as well as promising electrochemical water splitting at the interface of task-specific functionality fuelling in polymeric organic networks.

Creating Asymmetric Fe-N3C-N Sites in Single-Atom Catalysts Boosts Catalytic Performance for Oxygen Reduction Reaction

Fine tuning of the metal site coordination environment of a single-atom catalyst (SAC) to boost its catalytic activity for oxygen reduction reaction (ORR) is of significance but challenging. Herein, we report a new SAC bearing Fe-N3C-N sites with asymmetric in-plane coordinated Fe-N3C and axial coordinated N atom for ORR, which was obtained by pyrolysis of an iron isoporphyrin on polyvinylimidazole (PVI) coated carbon black. The C@PVI-(NCTPP)Fe-800 catalyst exhibited significantly improved ORR activity (E1/2 = 0.89 V vs RHE) than the counterpart SAC with Fe-N4-N sites in 0.1 M KOH. Significantly, the Zn-air batteries equipped with the C@PVI-(NCTPP)Fe-800 catalyst demonstrated an open-circuit voltage (OCV) of 1.45 V and a peak power density (Pmax) of 130 mW/cm2, outperforming the commercial Pt/C catalyst (OCV = 1.42 V; Pmax = 119 mW/cm2). The density functional theory (DFT) calculations revealed that the d-band center of the asymmetric Fe-N3C-N structure shifted upward, which enhances its electron-donating ability, favors O2 adsorption, and supports O-O bond activation, thus leading to significantly promoted catalytic activity. This research presents an intriguing strategy for the designing of the active site architecture in metal SACs with a structure-function controlled approach, significantly enhancing their catalytic efficiency for the ORR and offering promising prospects in energy-conversion technologies.

Surface-Modified Ruthenium Nanorods for an Ampere-Level Bifunctional Hydrogen Evolution Reaction/Oxygen Evolution Reaction Electrocatalyst

The practical applications of bifunctional ruthenium-based electrocatalysts with two active sites of Ru nanoparticles covered with RuO2 skins are limited. One reason is the presence of multiple equally distributed facets, some of which are inactive. In contrast, ruthenium nanorods with a high aspect ratio have multiple unequally distributed facets containing the dominance of active faces for efficient electrocatalysis. However, the synthesis of ruthenium nanorods has not been achieved due to difficulties in controlling the growth. Additionally, it is known that the adsorption capacity of intermediates can be impacted by the surface of the catalyst. Inspired by these backgrounds, the surface-modified (SM) ruthenium nanorods having a dominant active facet of hcp (100) through chemisorbed oxygen and OH groups (SMRu-NRs@NF) are rationally synthesized through the surfactant coordination method. SMRu-NRs@NF exhibits excellent hydrogen evolution in acid and alkaline solutions with an ultralow overpotential of 215 and 185 mV reaching 1000 mA cm-2, respectively. Moreover, it has also shown brilliant oxygen evolution electrocatalysis in alkaline solution with a low potential of 1.58 V to reach 1000 mA cm-2. It also exhibits high durability over 143 h for the evolution of oxygen and hydrogen at 1000 mA cm-2. Density functional theory studies confirmed that surface modification of a ruthenium nanorod with chemisorbed oxygen and OH groups can optimize the reaction energy barriers of hydrogen and oxygen intermediates. The surface-modified ruthenium nanorod strategy paves a path to develop the practical water splitting electrocatalyst.

Fabrication of N and S co-doped lignin-based porous carbon aerogels loaded with FeCo alloys and their application to oxygen evolution and reduction reactions in Zn-air batteries

Zn-air batteries are a highly promising clean energy sustainable conversion technology, and the design of dual-function electrocatalysts with excellent activity and stability is crucial for their development. In this work, FeCo alloy loaded biomass-based N and S co-doped carbon aerogels (FeCo@NS-LCA) were fabricated from chitosan and lignosulfonate-metal chelates via liquid nitrogen pre-frozen synergistic high-temperature carbonization with application in electrocatalytic reactions. The abundant oxygen-containing functional groups on lignosulfonates have a chelating effect on metal ions, which can avoid the aggregation of metal nanoparticles during carbonation and catalysis, facilitating the construction of a nanoconfinement catalytic system with biomass carbon as the domain-limiting body and FeCo nanoparticles as the active sites. FeCo@NS-LCA exhibited catalytic activity (E1/2 = 0.87 V, JL = 5.7 mA cm-2) comparable to the commercial Pt/C in the oxygen reduction reaction (ORR), excellent resistance to methanol toxicity and stability. Meanwhile, the overpotential of oxygen evolution reaction (OER) was 324 mV, close to that of commercial RuO2 catalysts (351 mV). This study utilizes the coordination action of lignosulfonate to provide a novel and environmentally friendly method for the preparation of confined nano-catalysts and provides a new perspective for the high-value utilization of biomass resources.

A High-Entropy Single-Atom Catalyst Toward Oxygen Reduction Reaction in Acidic and Alkaline Conditions

The design of high-entropy single-atom catalysts (HESAC) with 5.2 times higher entropy compared to single-atom catalysts (SAC) is proposed, by using four different metals (FeCoNiRu-HESAC) for oxygen reduction reaction (ORR). Fe active sites with intermetallic distances of 6.1 Å exhibit a low ORR overpotential of 0.44 V, which originates from weakening the adsorption of OH intermediates. Based on density functional theory (DFT) findings, the FeCoNiRu-HESAC with a nitrogen-doped sample were synthesized. The atomic structures are confirmed with X-ray photoelectron spectroscopy (XPS), X-ray absorption (XAS), and scanning transmission electron microscopy (STEM). The predicted high catalytic activity is experimentally verified, finding that FeCoNiRu-HESAC has overpotentials of 0.41 and 0.37 V with Tafel slopes of 101 and 210 mVdec-1 at the current density of 1 mA cm-2 and the kinetic current densities of 8.2 and 5.3 mA cm-2, respectively, in acidic and alkaline electrolytes. These results are comparable with Pt/C. The FeCoNiRu-HESAC is used for Zinc-air battery applications with an open circuit potential of 1.39 V and power density of 0.16 W cm-2. Therefore, a strategy guided by DFT is provided for the rational design of HESAC which can be replaced with high-cost Pt catalysts toward ORR and beyond.

Dual amplification for PEC ultrasensitive aptasensing of biomarker HER-2 based on Z-scheme UiO-66/CdIn2S4 heterojunction and flower-like PtPdCu nanozyme

As an important prognostic indicator in breast cancer, human epithelial growth factor receptor-2 (HER-2) is of importance for assessing prognosis of breast cancer patients, whose accurate and facile analysis are imperative in clinical diagnosis and treatment. Herein, photoactive Z-scheme UiO-66/CdIn2S4 heterojunction was constructed by a hydrothermal method, whose optical property and photoactivity were critically investigated by a range of techniques, combined by elucidating the interfacial charge transfer mechanism. Meanwhile, PtPdCu nanoflowers (NFs) were fabricated by a simple aqueous wet-chemical method, whose peroxidase (POD)-mimicking catalytic activity was scrutinized by representative tetramethylbenzidine (TMB) oxidation in H2O2 system. Taken together, the UiO-66/CdIn2S4 based photoelectrochemical (PEC) aptasensor was established for quantitative analysis of HER-2, where the detection signals were further magnified through catalytic precipitation reaction towards 4-chloro-1-naphthol (4-CN) oxidation (assisted by the PtPdCu NFs nanozyme). The PEC aptasensor presented a broader linear range within 0.1 pg mL-1-0.1 μg mL-1 and a lower limit of detection of 0.07 pg mL-1. This work developed a new PEC aptasensor for ultrasensitive determination of HER-2, holding substantial promise for clinical diagnostics.

Zeolitic imidazole framework-derived rich-Zn-Co3O4/N-doped porous carbon with multiple enzyme-like activities for synergistic cancer therapy

Reactive oxygen species (ROS)-centered chemodynamic therapy (CDT) holds significant potential for tumor-specific treatment. However, insufficient endogenous H2O2 and extra glutathione within tumor microenvironment (TME) severely deteriorate the CDT's effectiveness. Herein, rich-Zn-Co3O4/N-doped porous carbon (Zn-Co3O4/NC) was fabricated by two-step pyrolysis, and applied to build high-efficiency nano-platform for synergistic cancer therapy upon combination with glucose oxidase (GOx), labeled Zn-Co3O4/NC-GOx for clarity. Specifically, the multiple enzyme-like activities of the Zn-Co3O4/NC were scrutinously investigated, including peroxidase-like activity to convert H2O2 to O2∙-, catalase-like activity to decompose H2O2 into O2, and oxidase-like activity to transform O2 to O2∙-, which achieved the CDT through the catalytic cascade reaction. Simultaneously, GOx reacted with intracellular glucose to produce gluconic acid and H2O2, realizing starvation therapy. In the acidic TME, the Zn-Co3O4/NC-GOx rapidly caused intracellular Zn2+ pool overload and disrupted cellular homeostasis for ion-intervention therapy. Additionally, the Zn-Co3O4/NC exhibited glutathione peroxidase-like activity, which consumed glutathione in tumor cells and reduced the ROS consumption for ferroptosis. The tumor treatments offer some constructive insights into the nanozyme-mediated catalytic medicine, coupled by avoiding the TME limitations.

Nickel-Induced charge transfer in semicoherent Co-Ni/Co6Mo6C Heterostructures for reversible oxygen electrocatalysis

To achieve high-performance Zn-air batteries (ZABs), the development of bifunctional air electrodes capable of efficiently mediating both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is imperative. In this study, we present an N-doped carbon hollow nanorod encapsulating a semi-coherent Co-Ni/Co6Mo6C heterojunction, tailored for reversible oxygen catalysis. This nanohybrid demonstrated an ORR half-wave potential of 0.907 V alongside an OER overpotential of η10 = 352 mV. When incorporated into ZABs, this catalyst exhibited extraordinary performance metrics, including a high-power density of 343.7 mW/cm2, a specific capacity of 681 mAh/gZn, and enhanced durability. The distinctive electric field within the heterojunction facilitated electron transfer across the semi-coherent interface during reversible oxygen electrocatalysis, enhancing the adsorption and release of active intermediates. Thus, this heightened ORR-OER catalytic efficiency culminated in superior ZABs performance. Our findings afford a pivotal design paradigm for the advancement of productive bifunctional catalysts within the field of energy conversion technologies.

Platinum Nanoparticles Bonded with Carbon Nanotubes for High-Performance Ampere-Level All-Water Splitting

Platinum nanoparticles loaded on a nitrogen-doped carbon nanotubes exhibit a brilliant hydrogen evolution reaction (HER) in an alkaline solution, but their bifunctional hydrogen and oxygen evolution reaction (OER) has not been reported due to the lack of a strong Pt-C bond. In this work, platinum nanoparticles bonded in carbon nanotubes (Pt-NPs-bonded@CNT) with strong Pt-C bonds are designed toward ultralow overpotential water splitting ability in alkaline solution. Benefit from the strong interaction between platinum and high conductivity carbon nanotube substrates through the Pt-C bond also the platinum nanoparticles bonded in carbon nanotube can provide more stable active sites, as a result, the Pt-NPs-bonded@CNT exhibits excellent hydrogen evolution in acid and alkaline solution with ultralow overpotential of 0.19 and 0.23 V to reach 1000 mA cm-2, respectively. Besides, it shows superior oxygen evolution electrocatalysis in alkaline solution with a low overpotential of 1.69 V at 1000 mA cm-2. Furthermore, it also exhibits high stability over 110 h against the evolution of oxygen and hydrogen at 1000 mA cm-2. This strategy paves the way to the high performance of bifunctional electrocatalytic reaction with extraordinary stability originating from optimized electron density of metal active sites due to strong metal-substrate interaction.