Controlled release of paclitaxel from photocrosslinked chitosan hydrogels and its subsequent effect on subcutaneous tumor growth in mice

Research on triamcinolone-loaded thermosensitive chitosan hydrogels for preventing esophageal stricture induced by endoscopic submucosal dissection

Early-stage esophageal cancer is primarily treated by endoscopic submucosal dissection (ESD). However, extensive mucosal dissection creates a significant risk of postoperative esophageal stricture. Clinically, postoperative stricture can be prevented by glucocorticoids; however, there are drawbacks to both systemic and local administration of glucocorticoids, and improving drug administration methods is crucial. In this study, we developed a chitosan-based thermosensitive hydrogel for triamcinolone (TA) delivery. Our results indicated that the hydrogel remains liquid at low temperatures and can be injected into the esophageal wound site through an endoscopic biopsy channel. Upon reaching body temperature, the hydrogel undergoes spontaneous gelation and firmly adheres to the wound surface. The liquid phase enables convenient and precise delivery, while the gel phase achieves remarkable adhesion, tensile strength, and resistance to degradation. Moreover, the hydrogel exhibited an extended release duration of >10 days when loaded with a 10 mg dose. In vitro studies revealed that the hydrogel suppresses the proliferation and fibrogenesis of human scar fibroblasts (HKF). In a rat skin dermal defect model, the hydrogel attenuated keloid formation during the healing process. Consequently, the chitosan-based thermosensitive hydrogel developed in this study for triamcinolone delivery may be an effective tool for preventing post-ESD esophageal stricture.

Fabrication of triple-crosslinked gelatin/alginate hydrogels for controlled release applications

Hydrogels have been demonstrated as smart drug carriers to recognize the tumor microenvironment for cancer treatment, where the dynamic crosslinks in the hydrogel network contribute to the stimuli-responsive features but also result in poor stability and weak mechanical property of the hydrogels. Here, phenylboronic acid-grafted polyethyleneimine (PBA-PEI)-modified gelatin (PPG) was synthesized to crosslink alginate dialdehyde (ADA) through imine bonds and boronate ester bonds, and then calcium ions (Ca2+) were added to introduce the third calcium-carboxylate crosslinking in the network to form the triple-crosslinked PPG/ADA-Ca2+ hydrogels. Given the three types of dynamic bonds in the network, PPG/ADA-Ca2+ hydrogels possessed a self-healing manner, stimuli-responsiveness, and better mechanical properties compared to single- or double-crosslinked hydrogels. The controlled release capability of PPG/ADA-Ca2+ hydrogels was also demonstrated, showing the encapsulated molecules can be rapidly released from the hydrogel network in the presence of hydrogen peroxide while the release rate can be slowed down at acidic pH. Furthermore, PPG/ADA-Ca2+ hydrogels presented selected cytotoxicity and drug delivery to cancer cells due to the regulated degradation by the cellular microenvironment. Taken together, PPG/ADA-Ca2+ hydrogels have been demonstrated as promising biomaterials with multiple desirable properties and dynamic features to perform controlled molecule release for biomedical applications.

Cellulose based self-healing hydrogel through Boronic Ester connections for wound healing and antitumor applications

The application of biodegradable hydrogels in medical field has drawn great attention because their networked structure provided ideal spaces for drug loading and cell growth. In this research, the boronic acid was coupled onto carboxyethyl cellulose (CMC) to synthesize boronic acid grafted CMC (CMC-BA) conveniently and self-healing hydrogel was fabricated with polyvinyl alcohol (PVA) crosslinking through dynamic boronic ester bond. The CMC-BA/PVA hydrogel showed good biocompatibility and could be degraded by cellulase and in vivo. The hydrogel formed fast fit for localized injection to cover the irregular wounds and localize the antitumor drugs to the tumor site. The in vivo wound repairing experiment revealed the hydrogel could form airtight adhesion to the wound site to reduce blood loss and accelerate the wound repairing rate. The hydrogel as a drug release carrier also reduced the acute in vivo toxicity of DOX with antitumor performance well preserved through a controlled release profile. Based on the above advantages, the CMC-based hydrogel with boronic ester connection should have great potential in biomedical areas with profitable future.

In situ Hydrogels for Effective Treatment of Cancer: Strategies and Polymers Used

Cancer is a worldwide health ailment with no known boundaries in terms of mortality and occurrence rates, thus is one of the biggest threats to humankind. Hence, there is an absolute need to develop novel therapeutics to bridge the infirmities associated with chemotherapy and conventional surgical methodologies including impairment of normal tissue, compromised drug efficiency and an escalation in side effects. In lieu of this, there's been a surge in curiosity towards development of injectable hydrogels for cancer therapy because local administration of the active pharmaceutical agent offers encouraging advantages such as providing higher effective dose at target site, prolonged retention time of drug, ease of administration, mitigation of dose in vivo ,improved patient compliance. Furthermore, due to its biocompatible nature such systems can significantly reduce the side effects that occur on long-term exposure to chemotherapy. The present review details the most recent advancements in in-situ gel forming polymers (natural and synthetic), polymeric cross-linking methodologies and in-situ gelling mechanisms, focusing on their clinical benefits in cancer therapy.

Tissue Adhesives in Reconstructive and Aesthetic Surgery—Application of Silk Fibroin-Based Biomaterials

Tissue adhesives have been successfully used in various kind of surgeries such as oral and maxillofacial surgery for some time. They serve as a substitute for suturing of tissues and shorten treatment time. Besides synthetic-based adhesives, a number of biological-based formulations are finding their way into research and clinical application. In natural adhesives, proteins play a crucial role, mediating adhesion and cohesion at the same time. Silk fibroin, as a natural biomaterial, represents an interesting alternative to conventional medical adhesives. Here, the most commonly used bioadhesives as well as the potential of silk fibroin as natural adhesives will be discussed.

Synthesis and biological properties of maleimide-based macrocyclic lactone enediynes

Natural enediyne antibiotics are powerful DNA-cleavage agents due to the presence of the highly reactive hex-3-ene-1,5-diyne units. However, the complicated chemical structure and thermal instability make their synthesis, derivatization, and storage challenging. Heterocycle-fused enediynes, which exhibit strong antineoplastic activity, are promising analogues of natural enediynes for medicinal applications. To this end, a series of maleimide-based enediynes with macrocyclic lactone moieties were synthesized through the Sonagashira coupling reaction. Differential scanning calorimetry and electron paramagnetic resonance results showed that these macrocyclic enediynes exhibited a rather low onset temperature and the ability to generate radicals at physiological temperature. In addition, the structure-activity relationship of enediynes was analyzed by changing the ring size and the substituents on the propargyl group. Cellular experiments indicated that the diradicals produced by these enediynes efficiently cleaved DNA and disrupted the cell cycle distribution, and consequently induced tumor cell death via an apoptosis pathway at low half inhibitory concentrations. Computational studies suggested that the maleimide moiety promoted the propargyl-allenyl rearrangement of the cyclic enediyne, enabling the generation of diradical species through the Myers-Saito cyclization, and then abstracted hydrogen atoms from the H-donors.

Drug delivery systems for cancer treatment: a review of marine-derived polysaccharides

Abstract:

Cancer is a disease characterized by uncontrolled cell proliferation and the spread of cells to other tissues and remains one of the worldwide problems waiting to be solved. There are various treatment strategies for cancer, such as chemotherapy, surgery, radiotherapy, and immunotherapy, although it varies according to its type and stage. Many chemotherapeutic agents have limited clinical use due to lack of efficacy, off-target toxicity, metabolic instability, or poor pharmacokinetics. One possible solution to this high rate of clinical failure is to design drug delivery systems that deliver drugs in a controlled and specific manner and are not toxic to normal cells. Marine systems contain biodiversity, including components and materials that can be used in biomedical applications and therapy. Biomaterials such as chitin, chitosan, alginate, carrageenan, fucoidan, hyaluronan, agarose, and ulvan obtained from marine organisms have found use in DDSs today. These polysaccharides are biocompatible, non-toxic, biodegradable, and cost-effective, making them ideal raw materials for increasingly complex DDSs with a potentially regulated release. In this review, the contributions of polysaccharides from the marine environment to the development of anticancer drugs in DDSs will be discussed.

Natural Hydrogels Applied in Photodynamic Therapy

Natural hydrogels are three-dimensional (3D) water-retaining materials with a skeleton consisting of natural polymers, their derivatives or mixtures. Natural hydrogels can provide sustained or controlled drug release and possess some unique properties of natural polymers, such as biodegradability, biocompatibility and some additional functions, such as CD44 targeting of hyaluronic acid. Natural hydrogels can be used with photosensitizers (PSs) in photodynamic therapy (PDT) to increase the range of applications. In the current review, the pertinent design variables are discussed along with a description of the categories of natural hydrogels available for PDT.

Chitosan hydrogels for sustained drug delivery

Sustainable and controlled delivery of drugs is at the centre of a huge amount of undertaken researches. The ability of hydrogels, high water content materials, to achieve a local and delayed-delivery has already been demonstrated for a wide variety of therapeutic agents and various polymer natures. In particular, chitosan, a natural polymer, stands out as a first choice material for hydrogels elaboration in biomedical, cosmetic, and health related applications, owing to its interesting properties (as biocompatibility, biodegradability, antimicrobial capacity, and mucoadhesivity). Moreover, chitosan also allows drugs to go easier through biological barriers. The main objective of this review is to report the various uses of chitosan hydrogels as drug delivery devices to control and/or delay the release of drugs loaded into their three dimensional matrix. A wide spectrum of corresponding biomedical applications of these systems can be encountered in the literature, whatever the physicochemical nature of drugs (hydrophilic, hydrophobic, macromolecular), as detailed in this review.

Chitosan-based advanced materials for docetaxel and paclitaxel delivery: Recent advances and future directions in cancer theranostics

Paclitaxel (PTX) and docetaxel (DTX) are key members of taxanes with high anti-tumor activity against various cancer cells. These chemotherapeutic agents suffer from a number of drawbacks and it seems that low solubility in water is the most important one. Although much effort has been made in improving the bioavailability of PTX and DTX, the low bioavailability and minimal accumulation at tumor sites are still the challenges faced in PTX and DTX therapy. As a consequence, bio-based nanoparticles (NPs) have attracted much attention due to unique properties. Among them, chitosan (CS) is of interest due to its great biocompatibility. CS is a positively charged polysaccharide with the capability of interaction with negatively charged biomolecules. Besides, it can be processed into the sheet, micro/nano-particles, scaffold, and is dissolvable in mildly acidic pH similar to the pH of the tumor microenvironment. Keeping in mind the different applications of CS in the preparation of nanocarriers for delivery of PTX and DTX, in the present review, we demonstrate that how CS functionalized-nanocarriers and CS modification can be beneficial in enhancing the bioavailability of PTX and DTX, targeted delivery at tumor site, image-guided delivery and co-delivery with other anti-tumor drugs or genes.

Heparinoid Complex-Based Heparin-Binding Cytokines and Cell Delivery Carriers

Heparinoid is the generic term that is used for heparin, heparan sulfate (HS), and heparin-like molecules of animal or plant origin and synthetic derivatives of sulfated polysaccharides. Various biological activities of heparin/HS are attributed to their specific interaction and regulation with various heparin-binding cytokines, antithrombin (AT), and extracellular matrix (ECM) biomolecules. Specific domains with distinct saccharide sequences in heparin/HS mediate these interactions are mediated and require different highly sulfated saccharide sequences with different combinations of sulfated groups. Multivalent and cluster effects of the specific sulfated sequences in heparinoids are also important factors that control their interactions and biological activities. This review provides an overview of heparinoid-based biomaterials that offer novel means of engineering of various heparin-binding cytokine-delivery systems for biomedical applications and it focuses on our original studies on non-anticoagulant heparin-carrying polystyrene (NAC-HCPS) and polyelectrolyte complex-nano/microparticles (N/MPs), in addition to heparin-coating devices.

Polyelectrolyte Complexes of Natural Polymers and Their Biomedical Applications

Polyelectrolyte complexes (PECs), composed of natural and biodegradable polymers, (such as positively charged chitosan or protamine and negatively charged glycosaminoglycans (GAGs)) have attracted attention as hydrogels, films, hydrocolloids, and nano-/micro-particles (N/MPs) for biomedical applications. This is due to their biocompatibility and biological activities. These PECs have been used as drug and cell delivery carriers, hemostats, wound dressings, tissue adhesives, and scaffolds for tissue engineering. In addition to their comprehensive review, this review describes our original studies and provides an overview of the characteristics of chitosan-based hydrogel, including photo-cross-linkable chitosan hydrogel and hydrocolloidal PECs, as well as molecular-weight heparin (LH)/positively charged protamine (P) N/MPs. These are generated by electrostatic interactions between negatively charged LH and positively charged P together with their potential biomedical applications.

Encapsulation of ciprofloxacin within modified xanthan gum- chitosan based hydrogel for drug delivery

The aim of the present work was to investigate the preparation of polyelectrolyte hydrogel as potential drug carrier for antibacterial Ciprofloxacin drug (CFX), intended for controlled release formulation. Hydrogel of N-trimehtyl chitosan (TMC)/sodium carboxymethyl xanthan gum (CMXG) was prepared and ciprofloxacin was employed as a model drug to investigate the loading and release performance of the prepared hydrogel. FTIR, DSC, TGA and SEM analysis were used to characterize the TMC/CMXG hydrogel and its CFX loaded hydrogel. The results showed that the ciprofloxacin was successfully incorporated and released from the prepared hydrogel without the loss of structural integrity or the change in its functionality. The encapsulation efficiency of CFX within the prepared hydrogel was found to be increased with increasing the concentration of drug reaching about 93.8 ± 2.1% with concentration of CFX 250 µg/ml. It was shown also that the drug is entrapped within the gel without significant interaction as confirmed from FTIR spectra and DSC analysis. In vitro release study in phosphate buffer saline (PBS), indicated the steady rise in cumulative drug release with the highest release amount, reaching about 96.1 ± 1.8% up to 150 min, whereby the gel with high drug loading efficiency (3.52 ± 0.07%) displayed faster and higher release rate than that of gel containing a smaller amount of drug (0.44 ± 0.01%). The release kinetics of loaded drug followed zero-order kinetics. CFX drug loaded hydrogel showed high activity against the gram positive and gram negative bacterial strains due to the successful released of CFX from the CFX loaded hydrogel into the tested bacterial strains with the highest diameter of inhibition zone against Escherichia coli (67.0 ± 1.0) as compared to reference antibiotic, Gentamicin (28 ± 0.5). Cytotoxicity of the prepared hydrogel was examined in vitro using lung human normal cell lines and showed the highest cell viability (97 ± 0.5%) at concentration up to 50 µg/ml. Consequently, TMC/CMXG hydrogel can be proposed as new controlled release drug delivery system.

Nitrosalicyl-imine-chitosan hydrogels based drug delivery systems for long term sustained release in local therapy

The paper focuses on the synthesis and characterization of new drug delivery systems for local therapy. They were prepared by in situ hydrogelation of chitosan biopolymer with nitrosalicylaldehyde in the presence of a model drug, varying the crosslinking density. The structural, supramolecular and morphological characteristics of the systems were studied by FTIR spectroscopy, X-ray diffraction and, POM and SEM microscopy. In vitro release of the drug has been explored in simulated physiological conditions and in vivo release was investigated by the somatic pain model on rats. Information on the biodegradation of the systems was gain by simulating experiments of enzymatic degradation. The systems were biodegradable and showed a prolonged drug release, assuring an in vivo efficient therapeutic effect over 5 days, with no systemic toxicity. All these findings demonstrated that the new hydrogels based on nitrosalicyl-imine-chitosan provides a practical approach for sustained drug delivery for local chemotherapy.

Controlled drug delivery of ciprofloxacin from ultrasonic hydrogel

Ciprofloxacin is an antibacterial fluoroquinolone that stops the DNA synthesis, after penetration into the bacterial cells. This drug is applied in the curing of bacterial infections, as well as in antibiotics to treat urinary infections in women, infectious diarrhea and typhoid fever. The objective of the present work is to study controlled release of ciprofloxacin by hydrogel prepared by ultrasound. For this, first the swelling properties of hydrogel and then the absorption of drug were evaluated. The swollen hydrogel was dried in oven (50°C) and was ready for release experiments. During release, the loaded powder of the hydrogel was added to a buffer solution of pH 7.4, similar to human body condition. Then drug concentration was measured using a UV-visible (UV-Vis) spectrophotometer and a calibration curve. The results showed that the hydrogel is sensitive to pH, which makes it a good candidate for ciprofloxacin delivery in intestine. In addition, it was shown that the drug absorption is proportional with the swelling content of the hydrogel and the drug concentration in the loading process. The chemical structure and morphology of the hydrogels and loaded drug were characterized using Fourier transform infrared, UV-Vis, scanning electronic microscopy and thermal gravimetric analysis spectroscopy. According to the results presented here, acrylic-based hydrogels can be used in biomedical fields, especially for controlled drug release.

Sustained-releasing hollow microparticles with dual-anticancer drugs elicit greater shrinkage of tumor spheroids

Polymeric particulate delivery systems are vastly explored for the delivery of chemotherapeutic agents. However, the preparation of polymeric particulate systems with the capability of providing sustained release of two or more drugs is still a challenge. Herein, poly (D, L-lactic-co-glycolic acid, 50:50) hollow microparticles co-loaded with doxorubicin and paclitaxel were developed through double-emulsion solvent evaporation technique. Hollow microparticles were formed through the addition of an osmolyte into the fabrication process. The benefits of hollow over solid microparticles were found to be higher encapsulation efficiency and a more rapid drug release rate. Further modification of the hollow microparticles was accomplished through the introduction of methyl-β-cyclodextrin. With this, a higher encapsulation efficiency of both drugs and an enhanced cumulative release were achieved. Spheroid study further demonstrated that the controlled release of the drugs from the methyl-β-cyclodextrin -loaded hollow microparticles exhibited enhanced tumor regressions of MCF-7 tumor spheroids. Such hollow dual-drug-loaded hollow microparticles with sustained releasing capabilities may have a potential for future applications in cancer therapy.

Combinatorial and sequential delivery of gemcitabine and oseltamivir phosphate from implantable poly(d,l-lactic-co-glycolic acid) cylinders disables human pancreatic cancer cell survival

Combination therapies against multiple targets are currently being developed to prevent resistance to a single chemotherapeutic agent and to extirpate pre-existing resistance in heterogeneous cancer cells in tumors due to selective pressure from the single agent. Gemcitabine (GEM), a chemotherapeutic agent, is the current standard of care for patients with pancreatic cancer. Patients with pancreatic cancer receiving GEM have a low progression-free survival. Given the poor response rate to GEM, cancer cells are known to develop rapid resistance to this drug. Metronomic chemotherapy using combinatorial and sequential delivery systems are novel developmental approaches to disrupt tumor neovascularization, reduce systemic drug toxicity, and increase the sensitivity of chemotherapeutics in cancer. Here, implantable double-layered poly(d,l-lactic-co-glycolic acid) (PLGA) cylinders were engineered to sequentially release GEM in combination with oseltamivir phosphate (OP) over an extended time. Double-layered PLGA cylindrical implants loaded with these active hydrophilic drugs were fabricated with minimal loss of drugs during the formulation, enabling extensive control of drug loading and establishing uniform drug distribution throughout the polymer matrix. OP is used in the formulation because of its anticancer drug properties targeting mammalian neuraminidase 1 (Neu1) involved in multistage tumorigenesis. OP and GEM encapsulated in inner/outer GEMⁱⁿ/OP^out or OPⁱⁿ/GEM^out implantable double-layered PLGA cylinders displayed sustained near linear release over 30 days. OP and GEM released from the double-layered PLGA cylinders effectively reduced cell viability in pancreatic cancer cell line PANC1 and its GEM-resistant variant for up to 15 days.

Hydrogels for Biomedical Applications: Cellulose, Chitosan, and Protein/Peptide Derivatives

Hydrogels based on polysaccharide and protein natural polymers are of great interest in biomedical applications and more specifically for tissue regeneration and drug delivery. Cellulose, chitosan (a chitin derivative), and collagen are probably the most important components since they are the most abundant natural polymers on earth (cellulose and chitin) and in the human body (collagen). Peptides also merit attention because their self-assembling properties mimic the proteins that are present in the extracellular matrix. The present review is mainly focused on explaining the recent advances on hydrogels derived from the indicated polymers or their combinations. Attention has also been paid to the development of hydrogels for innovative biomedical uses. Therefore, smart materials displaying stimuli responsiveness and having shape memory properties are considered. The use of micro- and nanogels for drug delivery applications is also discussed, as well as the high potential of protein-based hydrogels in the production of bioactive matrices with recognition ability (molecular imprinting). Finally, mention is also given to the development of 3D bioprinting technologies.

Synthesis and Application of Injectable Bioorthogonal Dendrimer Hydrogels for Local Drug Delivery

We developed novel dendrimer hydrogels (DH)s on the basis of bioorthogonal chemistry, in which polyamidoamine (PAMAM) dendrimer generation 4.0 (G4) functionalized with strained alkyne dibenzocyclooctyne (DBCO) via PEG spacer (M_n = 2,000 g/mol) underwent strain-promoted azide-alkyne cycloaddition (SPAAC) with polyethylene glycol bisazide (PEG-BA) (M_n= 20,000 g/mol) to generate a dendrimer-PEG cross-linked network. This platform offers a high degree of functionality and modularity. A wide range of structural parameters including dendrimer generation, degree of PEGylation, loading density of clickable DBCO groups, PEG-BA chain length as well as the ratio of clickable dendrimer to PEG-BA and their concentrations can be readily manipulated to tune chemical and physical properties of DHs. We used this platform to prepare an injectable liquid DH. This bioorthogonal DH exhibited high cytocompatibility and enabled sustained release of the anticancer drug 5-fluorouracil (5-FU). Following intratumoral injection, the DH/5-FU formulation significantly suppressed tumor growth and improved survival of HN12 tumor-bearing mice by promoting tumor cell death as well as by reducing tumor cell proliferation and angiogenesis.

Development of a rapid in vitro tissue deadhesion system using the thermoresponsive sol-gel transition of hydroxybutyl chitosan

In regenerative medicine, it has become increasingly important to collect cultured tissues using non-invasive methods. Enzymatic deadhesion is normally used to collect cells, but this method cannot be used when trying to collect whole tissues in order to avoid damaging cell-cell interactions. In order to resolve this issue, a thermoresponsive culture dish with poly(N-isopropyl acrylamide) (PNIPAAm) has been employed. This system can change its hydrophobicity depending on temperature. Thus, tissues can attach above 37 °C and be detached below 20 °C. However, the PNIPAAm system has some issues related to cost and detachment time. In this study, we developed a novel thermoresponsive detachment system using a polysaccharide derivative. We chose hydroxy butyl chitosan (HBC) as the thermoresponsive polymer because of its high biocompatibility and rapid phase transition. We developed a novel method of HBC synthesis in conditions that were milder than previously reported. We used spin-coating to make a thin coating on two kinds of culture dishes with various concentrations of HBC solution. Seeded cells attached to the surface at less than 0.5 mg/ml HBC coating concentration, and they could be successfully detached by simply lowering the temperature of the suspension dishes without enzymatic treatment; the cells took only 5-20 min to detach. To evaluate this system, we measured three metrics related to cell culturing on culture dishes: initial attachment rate, detachment rate and tissue detachment time. The study revealed that tissues could be detached faster on the suspension dishes used in this study than on PNIPAAm grafted dishes when HBC was coated at 0.5 mg/ml. We successfully developed a novel tissue detachment system using HBC. These results suggest that smart polymers may be useful in regenerative medicine.

Importance of zwitterionic incorporation into polymethacrylate-based hydrogels for simultaneously improving optical transparency, oxygen permeability, and antifouling properties

The introduction of zwitterionic SBMA into HEMA hydrogels enables to improve optical transparency, oxygen permeability, and antifouling property for contact lenses-based ophthalmic applications.

Engineered in-situ depot-forming hydrogels for intratumoral drug delivery

Chemotherapy is the traditional treatment for intermediate and late stage cancers. The search for treatment options with minimal side effects has been ongoing for several years. Drug delivery technologies that result in minimal or no side effects with improved ease of use for the patients are receiving increased attention. Polymer drug conjugates and nanoparticles can potentially offset the volume of drug distribution while enhancing the accumulation of the active drug in tumors thereby reducing side effects. Additionally, development of localized drug delivery platforms is being investigated as another key approach to target tumors with minimal or no toxicity. Development of in-situ depot-forming gel systems for intratumoral delivery of immuno-oncology actives can enhance drug bioavailability to the tumor site and reduce systemic toxicity. This field of drug delivery is critical to develop given the advent of immunotherapy and the availability of novel biological molecules for treating solid tumors. This article reviews the advances in the field of engineered in-situ gelling platforms as a practical tool for local delivery of active oncolytic agents to tumor sites.

Delivery of doxorubicin and paclitaxel from double-layered microparticles: The effects of layer thickness and dual-drug vs. single-drug loading

Double-layered microparticles composed of poly(d,l-lactic-co-glycolic acid, 50:50) (PLGA) and poly(l-lactic acid) (PLLA) were loaded with doxorubicin HCl (DOX) and paclitaxel (PCTX) through a solvent evaporation technique. DOX was localized in the PLGA shell, while PCTX was localized in the PLLA core. The aim of this study was to investigate how altering layer thickness of dual-drug, double-layered microparticles can influence drug release kinetics and their antitumor capabilities, and against single-drug microparticles. PCTX-loaded double-layered microparticles with denser shells retarded the initial release of PCTX, as compared with dual-drug-loaded microparticles. The DOX release from both DOX-loaded and dual-drug-loaded microparticles were observed to be similar with an initial burst. Through specific tailoring of layer thicknesses, a suppressed initial burst of DOX and a sustained co-delivery of two drugs can be achieved over 2months. Viability studies using spheroids of MCF-7 cells showed that controlled co-delivery of PCTX and DOX from dual-drug-loaded double-layered microparticles were better in reducing spheroid growth rate. This study provides mechanistic insights into how by tuning the layer thickness of double-layered microparticles the release kinetics of two drugs can be controlled, and how co-delivery can potentially achieve better anticancer effects.

STATEMENT OF SIGNIFICANCE

While the release of multiple drugs has been reported to achieve successful apoptosis and minimize drug resistance, most conventional particulate systems can only deliver a single drug at a time. Recently, although a number of formulations (e.g. micellar nanoparticles, liposomes) have been successful in delivering two or more anticancer agents, sustained co-delivery of these agents remains inadequate due to the complex agent loading processes and rapid release of hydrophilic agents. Therefore, the present work reports the multilayered particulate system that simultaneously hosts different drugs, while being able to tune their individual release over months. We believe that our findings would be of interest to the readers of Acta Biomaterialia because the proposed system could open a new avenue on how two drugs can be released, through rate-controlling carriers, for combination chemotherapy.

Synthesis and biocompatibility of a biodegradable and functionalizable thermo-sensitive hydrogel

Injectable thermal gels are a useful tool for drug delivery and tissue engineering. However, most thermal gels do not solidify rapidly at body temperature (37°C). We addressed this by synthesizing a thermo-sensitive, rapidly biodegrading hydrogel. Our hydrogel, poly(ethylene glycol)-co-poly(propanol serinate hexamethylene urethane) (EPSHU), is an ABA block copolymer comprising A, methoxy poly ethylene glycol group and B, poly (propanol L-serinate hexamethylene urethane). EPSHU was characterized by gel permeation chromatography for molecular weight and ¹H NMR and Fourier transformed infrared for structure. Rheological studies measured the phase transition temperature. In vitro degradation in cholesterol esterase and in Dulbecco's phosphate buffered saline (DPBS) was tracked using the average molecular weight measured by gel permeation chromatography. LIVE/DEAD and resazurin reduction assays performed on NIH 3T3 fibroblasts exposed to EPSHU extracts demonstrated no cytotoxicity. Subcutaneous implantation into BALB/cJ mice indicated good biocompatibility in vivo. The biodegradability and biocompatibility of EPSHU together make it a promising candidate for drug delivery applications that demand carrier gel degradation within months.

Photo-irradiation paradigm: Mapping a remarkable facile technique used for advanced drug, gene and cell delivery

Undoubtedly, the progression of photo-irradiation technique has provided a smart engineering tool for the state-of-the-art biomaterials that guide the biomedical and therapeutic domains for promoting the modern pharmaceutical industry. Many investigators had exploited such a potential technique to create/ameliorate numerous pharmaceutical carriers. These carriers show promising applications that vary from small drug to therapeutic protein delivery and from gene to living cell encapsulation design. Harmony between the properties of precisely engineered precursors and the formed network structure broadens the investigator's intellect for both brilliant creations and effective applications. As well, controlling photo-curing at the formulation level, through manipulating the absorption of light stimuli, photoinitiator system and photo-responsive precursor, facilitates the exploration of novel distinctive biomaterials. Discussion of utilizing different photo-curing procedures in designing/formulation of different pharmaceutical carriers is the main emphasis of this review. In addition, recent applications of these intelligent techniques in targeted, controlled, and sustained drug delivery with understanding of photo-irradiation concept and mechanism are illustrated.

Nanotechnology-based drug delivery systems for treatment of oral cancer: a review

Oral cancer (oral cavity and oropharynx) is a common and aggressive cancer that invades local tissue, can cause metastasis, and has a high mortality rate. Conventional treatment strategies, such as surgery and chemoradiotherapy, have improved over the past few decades; however, they remain far from optimal. Currently, cancer research is focused on improving cancer diagnosis and treatment methods (oral cavity and oropharynx) nanotechnology, which involves the design, characterization, production, and application of nanoscale drug delivery systems. In medicine, nanotechnologies, such as polymeric nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, gold nanoparticles, hydrogels, cyclodextrin complexes, and liquid crystals, are promising tools for diagnostic probes and therapeutic devices. The objective of this study is to present a systematic review of nanotechnology-based drug delivery systems for oral cancers.

Decanoic acid-modified glycol chitosan hydrogels containing tightly adsorbed palmityl-acylated exendin-4 as a long-acting sustained-release anti-diabetic system

Decanoic acid-modified glycol chitosan (DA-GC) hydrogels containing tightly adsorbed palmitic acid-modified exendin-4 (Ex4-C16) were prepared, and their pharmaceutical abilities as a long-acting sustained-release exendin-4 system for the treatment of diabetes were evaluated. Glycol chitosan (GC) was conjugated with N-hydroxysuccinimide-activated decanoic acid (DA) in anhydrous 0.4% dimethylaminopyridine/dimethylsulfoxide at different feed ratios. DA-GC hydrogels formed by physical self-assembly during dialysis vs. deionized water, and their inner network structures, swelling or gel-forming abilities and release properties were examined. The hypoglycemia caused by Ex4-C16-loaded DA-GC hydrogels was evaluated by subcutaneous administration in type 2 diabetic db/db mice. The results obtained showed that GC prepared at a DA:GC feed ratio of 1:100 had optimal properties with respect to hydrogel swelling, stiffness and Ex4-C16 incorporation, whereas DA-GC hydrogels prepared at a feed ratio of greater than 1:100 formed gels that were too stiff. The in vitro and in vivo release of Ex4-C16 from DA-GC hydrogels was dramatically delayed compared with native Ex4 probably due to strong hydrophobic interactions. In particular, Ex4-C16 in DA-GC hydrogels was found to be present around the injection site up to 10 days after subcutaneous administration, whereas Ex4 in DA-GC hydrogels was cleared from injection sites in ≈ 2 days in ICR mice. Finally, the hypoglycemia induced by Ex4-C16 DA-GC hydrogels was maintained for >7 days. Our findings demonstrate that Ex4-C16 DA-GC hydrogels offer a potential delivery system for the long-term treatment of type 2 diabetes.

Anticancer effects of chitin and chitosan derivatives

Despite considerable progress in medical research, cancer is still one of the high-ranking causes of death in the world. It is the second most common cause of death due to disease after heart disease, and according to World Health Organization it will be the cause of death for more than 10 million people in 2020; therefore, one of the main research goals for researchers investigating new anticancer agents. But the major complication for the cancer cure without surgeries is side effects. Especially, cytotoxic anticancer chemotherapeutic agents generally produce severe side effects, while reducing host resistance to cancer and infections. Therefore, it is important to find new, powerful anticancer agents that are highly effective, biodegradable, and biocompatible. Chitin and chitosan are biopolymers which have unique structural possibilities for chemical and mechanical modifications to generate novel properties, functions. These biopolymers are biocompatible, biodegradable, and nontoxic, and their chemical properties allow them to be easily processed into gels, sponges, membranes, beads, and scaffolds forms also. Due to their unique properties, they are excellent candidates for cancer cure or cancer diagnosis.

Hemostatic absorbable gelatin sponge loaded with 5-fluorouracil for treatment of tumors

BACKGROUND

Surgical tumor resection is the main treatment for tumors however the treatment process often results in massive bleeding and tumor cell residue. The main aim of this research was to address problems such as bleeding, systemic chemotherapy side effects while enhancing quality of life, and increasing drug concentrations at the tumor site by developing a novel formulation with local long-term efficacy for treatment of tumors and to stop bleeding.

METHODS

5-Fluorouracil (5-FU) was suspended in an ethyl acetate solution of poly D,L-lactide-co-glycolic acid (PLGA) and a vacuum drying method was applied. The hemostatic gelatin sponge loaded with 5-FU was prepared by absorption of the suspension. The in vitro and in vivo characteristics of the hemostatic gelatin sponge loaded with 5-FU (5-FU-HAGS) were investigated.

RESULTS

5-FU-HAGS (hemostatic absorbable gelatin sponge loaded with 5-fluorouracil) was successfully produced with controlled release of the content and was reproducibly suitable for local tumor treatment as an implant to stop bleeding. The encapsulation efficiency of 5-FU-HAGS was above 98%. The in vitro 5-FU release kinetic profile matched a near zero-order equation for 20 days. The in vivo 5-FU plasma concentration was at a more stable level than when 5-FU solution was administered by subcutaneous injection. Bleeding can be stopped more effectively by coating a piece of blank gelatin sponge. The survival ratio of tumor-bearing mice using a 5-FU-HAGS subcutaneous implant was higher when compared to mice given a subcutaneous injection of 5-FU solution.

CONCLUSION

The 5-FU-HAGS system is a potential and effective way of enhancing the survival ratio and improving the quality of life of tumor-bearing mice.

Collagen-hydroxyapatite/cisplatin drug delivery systems for locoregional treatment of bone cancer

In this paper, the synthesis and characterization of novel cisplatin-loaded collagen (COLL)/hydroxyapatite (HA) composite materials are presented. The composite materials were designed to obtain a COLL: HA weight ratio close to the bone composition. The content of embedded cisplatin was chosen to assure a concentration of cisplatin of 6 and 10 μM, respectively, into the culture media used in cell culture experiments. These cisplatin delivery systems were characterized by determining the physico-chemical properties of the composite material, the drug release process as well as their biological activity. Based on the in vitro data that showed the cytotoxic, anti-proliferative and anti-invasive activities of these multifunctional systems on G292 osteosarcoma cells in dependence on the cisplatin concentration released in culture medium, we conclude that the newly developed COLL/HA-cisplatin drug delivery system could be a feasible approach for locoregional chemotherapy of bone cancer.

Injectable implants for the sustained release of protein and peptide drugs

Protein and peptide macromolecules have emerged as promising therapeutic agents in recent years. However, their delivery to the target site can be challenging owing to their susceptibility to denaturation and degradation, short half-life and, therefore, poor bioavailability. In situ-forming implants present an attractive parenteral delivery platform for proteins and peptides because of their ease of application, sustained-release properties, tissue biocompatibility and simple manufacture. In this review, we discuss the various mechanisms by which polymer systems assemble in situ to form implant devices for sustained release of therapeutic macromolecules, and highlight recent advances in polymer systems that gel in response to a combination of these mechanisms. Finally, we examine release mechanisms, marketed products and limitations of injectable implants.