Transferosomal gel for transdermal delivery of risperidone: Formulation optimization and ex vivo permeation

Gliclazide loaded spanlastic nanovesicles: empowering bioavailability and antidiabetic efficacy

OBJECTIVE

This work aimed to prepare spanlastics nanovesicles (SNVs) loaded with gliclazide (GCZ) to increase the drug's oral bioavailability and anti-diabetic effects.

METHODS

Two types of edge activators (tween 80 and/or brij35) and two types of spans (span 60 and span 80) were used to prepare SNVs using the ethanol injection method,23 factorial design was used to investigate the effects of various span types, edge activator types, and the ratio of span to edge activator.

RESULTS

The optimum formulation (F6) was selected and its in-vitro drug release, in-vivo pharmacokinetics, and pharmacodynamics were evaluated. A transition electron microscope (TEM) showed spherical particles with smooth surfaces, (F6) drug release was (Q12 97.05 ± 4.85) while GCZ powder was (97.89 ± 4.56 after 4 h) also showed better entrapment efficiency (EE% 95.1 ± 3.8). In- vivo pharmacokinetic study showed an increase in Cmax and tmax (12.93 ± 1.34, 3.2 ± 0.83) compared to unprocessed GCZ powder (2.88 ± 1.59, 1.8 ± 0.74). In-vivo pharmacodynamics study of diabetic rats demonstrated that GCZ-loaded SNVs has a higher % maximum decrease in blood glucose levels (MR) 58.31 ± 5.70 compared to 38.33 ± 8.18 for free drug and % total drop in blood glucose levels (TD) 25.78 ± 5.31% for GCZ-SNVs compared to 20.26 ± 6.05% for free drug. Histopathological examination revealed no cytotoxic signs in any of the examined samples.

CONCLUSION

Results revealed a significant rise in relative bioavailability, sustained and prolonged drug release when compared to the unprocessed GCZ powder.

AI-Driven Innovation in Skin Kinetics for Transdermal Drug Delivery: Overcoming Barriers and Enhancing Precision

Transdermal drug delivery systems (TDDS) offer an alternative to conventional oral and injectable drug administration by bypassing the gastrointestinal tract and liver metabolism, improving bioavailability, and minimizing systemic side effects. However, widespread adoption of TDDS is limited by challenges such as the skin's permeability barrier, particularly the stratum corneum, and the need for optimized formulations. Factors like skin type, hydration levels, and age further complicate the development of universally effective solutions. Advances in artificial intelligence (AI) address these challenges through predictive modeling and personalized medicine approaches. Machine learning models trained on extensive molecular datasets predict skin permeability and accelerate the selection of suitable drug candidates. AI-driven algorithms optimize formulations, including penetration enhancers and advanced delivery technologies like microneedles and liposomes, while ensuring safety and efficacy. Personalized TDDS design tailors drug delivery to individual patient profiles, enhancing therapeutic precision. Innovative systems, such as sensor-integrated patches, dynamically adjust drug release based on real-time feedback, ensuring optimal outcomes. AI also streamlines the pharmaceutical process, from disease diagnosis to the prediction of drug distribution in skin layers, enabling efficient formulation development. This review highlights AI's transformative role in TDDS, including applications of models such as Deep Neural Networks (DNN), Artificial Neural Networks (ANN), BioSIM, COMSOL, K-Nearest Neighbors (KNN), and Set Covering Machine (SVM). These technologies revolutionize TDDS for both skin and non-skin diseases, demonstrating AI's potential to overcome existing barriers and improve patient care through innovative drug delivery solutions.

Menthol-based Novel Ultra-Deformable Vesicle: Formulation, Optimization and Evaluation of an Antifungal Drug

The current study aims to establish a novel ultra-deformable vesicular system to enhance the drug penetration across the skin by preparing the ketoconazole-loaded menthosomes. It was achieved through regular thin-film evaporation & hydration techniques. To examine the effect of formulation parameters on menthosome characteristics, a 23 full factorial design was used using Design-Expert® software. The optimized batch exhibited a vesicle size (107.6 nm), a polydispersity index (PDI) (0.248), entrapment efficiency (% EE) (76.9%), and a zeta potential (-33.7 mV). Results from ex vivo skin permeation studies and in vitro drug release demonstrated enhanced improved skin permeation and drug release compared to other formulations. An in vitro antifungal and in vivo pharmacodynamic study, elucidated the enhanced effectiveness of the optimized formulation against Candida albicans. In summary, menthosomes could serve as a potent vehicle to enhance drug penetration via the skin to improve its antifungal activity.

Emerging therapies and innovations in vitiligo management: a comprehensive review

Vitiligo is a common skin disorder where melanocytes, the cells that produce skin pigment, are destroyed by the immune system, leading to white patches on the skin and mucous membranes. This condition affects 0.4% to 2.0% of the global population, with a higher prevalence in females and often beginning in childhood. In India, about 1% of the population is affected, particularly in northern regions, with a higher incidence in females and links to other autoimmune diseases. This review examines recent progress in understanding vitiligo and its treatment. It focuses on the genetic, autoimmune, and environmental factors involved in the disease and highlights new therapies, such as targeted molecular treatments and advanced repigmentation methods. Current research shows that oxidative stress and genetic predispositions contribute to the autoimmune destruction of melanocytes. Novel drug delivery systems, including liposomes, nanoemulsions, and nanostructured lipid carriers, have improved treatment effectiveness. Clinical trials are exploring new treatments like Ruxolitinib cream and melanocyte transplantation, while teledermatology is becoming useful for managing patients. Vitiligo also poses a significant economic burden due to its impact on patients' quality of life. Continued research is essential to develop better, more accessible treatments and reduce the economic impact of vitiligo.

Advanced Drug Delivery Technologies for Enhancing Bioavailability and Efficacy of Risperidone

Multidisciplinary research has been conducted on novel drug delivery technologies to maximize therapeutic advantages while curtailing undesirable reactions. Drugs under BCS Class II often have a low bioavailability because the dissolution phase limits the absorption efficiency. In this review, risperidone was used as a pharmacological model to examine the impact of solubility enhancement at the primary administration site for such pharmaceuticals. For tackling drug-related pertains like disease diagnostics, therapy, and prophylactic measures at the cellular or molecular levels, implementing nanocarriers in therapeutics has significant potential. The comprehensive pharmaceutical compositions of risperidone nano-microparticles that have been developed to alleviate psychosis are highlighted in the study, which also illustrates potential future developments in such domains.

Formulation, optimization and evaluation of ocular gel containing nebivolol Hcl-loaded ultradeformable spanlastics nanovesicles: In vitro and in vivo studies

The study aims to improve the ocular delivery of Nebivolol HCL (NBV) belonging to the Biopharmaceutics classification system (BCSII) by using spanlastic nanovesicles (SNVs) for ophthalmic delivery and incorporating them into hydroxypropyl methylcellulose gel with ketorolac tromethamine (KET) as an anti-inflammatory to improve glaucoma complications like Conjunctivitis. SNVs were prepared by ethanol injection technique using span (60) as a surfactant and labrasol as an edge activator (EA). The impact of formulation factors on SNVs properties was investigated using a Box-Behnken design. In vitro evaluations showed that the formulations (F1, F4, and F14), containing Span 60 and labrasol as EA (25%, 50%, and 25%), exhibited high EE% with low PS and high ZP and DI. Additionally, 61.72 ± 0.77%, 58.97 ± 1.44%, and 56.20 ± 2.32% of the NBV amount were released from F1, F4, and F14 after 5 h, compared to 93.94 ± 1.21% released from drug suspension. The selected formula (G1), containing F1 in combination with KET and 2% w/w HPMC, exhibited 76.36 ± 0.90% drug release after 12 h. Ex vivo Confocal laser scanning revealed a high penetration of NBV-SNVs gel that ascertained the results of the in-vitro study. In vivo studies showed a significant decrease in glaucoma compared to drug suspension, and histopathological studies showed improvement in glaucomatous eye retinal atrophy. G1 is considered a promising approach to improving ocular permeability, absorption, and anti-inflammatory activity, providing a safer alternative to current regimens.

In-situ gel: A smart carrier for drug delivery

In-situ gel technology is a promising drug delivery strategy that undergoes a 'sol to gel' transition upon administration, providing controlled and prolonged drug release. These gels are composed of cross-linked 3D networks of polymers, with hydrogels being a specific type of absorbing water while retaining their shape. Gelation can be triggered by various stimuli, such as temperature, pH, ions, and light. They offer several advantages like improved patient compliance, extended drug residence time, localized drug delivery, etc, but also have some disadvantages like drug degradation and limited mechanical strength. In-situ gel falls into three categories: temperature-sensitive, ion-sensitive, and pH-sensitive, but multi-responsive gels that respond to multiple stimuli have better drug release characteristics. The mechanism of in-situ gel formation involves physical and chemical mechanisms. There are various applications of in-situ gel, like ocular drug delivery, nose-to-brain delivery, etc. In this review, we have discussed the types, and mechanisms of in-situ gel & use of in-situ gel in the treatment of different diseases through various routes like buccal, vaginal, ocular, nasal, etc., along with its use in targeted drug delivery.

Recent update on alginate based promising transdermal drug delivery systems

Alongside oral delivery of therapeutics, transdermal delivery systems have gained increased patient acceptability over past few decades. With increasing popularity, novel techniques were employed for transdermal drug targeting which involves microneedle patches, transdermal films and hydrogel based formulations. Hydrogel forming ability along with other rheological behaviour makes natural polysaccharides an attractive option for transdermal use. Being a marine originated anionic polysaccharide, alginates are widely used in pharmaceutical, cosmetics and food industries. Alginate possesses excellent biodegradability, biocompatibility and mucoadhesive properties. Owing to many favourable properties required for transdermal drug delivery systems (TDDS), the application of alginates are increasing in recent times. This review summarizes the source and properties of alginate along with several transdermal delivery techniques including the application of alginate for respective transdermal systems.

Thyme Oil-Containing Fluconazole-Loaded Transferosomal Bigel for Transdermal Delivery

The objective of the present research was to develop fluconazole-loaded transferosomal bigels for transdermal delivery by employing statistical optimization (23 factorial design-based). Thin-film hydration was employed to prepare fluconazole-loaded transferomal suspensions, which were then incorporated into bigel system. A 23 factorial design was employed where ratios of lipids to edge activators, lipids (soya lecithin to cholesterol), and edge activators (sodium deoxycholate to Tween 80) were factors. Ex vivo permeation flux (Jss) of transferosomal bigels across porcine skin was analyzed as response. The optimal setting for optimized formulation (FO) was A= 4.96, B= 3.82, and C= 2.16. The optimized transferosomes showed 52.38 ± 1.76% DEE, 76.37 nm vesicle size, 0.233 PDI, - 20.3 mV zeta potential, and desirable deformability. TEM of optimized transferosomes exhibited a multilamelar structure. FO bigel's FE-SEM revealed a globule-shaped vesicular structure. Further, the optimized transferosomal suspension was incorporated into thyme oil (0.1% w/w)-containing bigel (TO-FO). Ex vivo transdermal fluconazole permeation from different transferosomal bigels was sustained over 24 h. The highest permeation flux (4.101 μg/cm2/h) was estimated for TO-FO bigel. TO-FO bigel presented 1.67-fold more increments of antifungal activity against Candida albicans than FO bigel. The prepared thyme oil (0.1% w/w)-containing transfersomal bigel formulations can be used as topical delivery system to treat candida related fungal infections.

Curcumin Transferosome-Loaded Thermosensitive Intranasal in situ Gel as Prospective Antiviral Therapy for SARS-Cov-2

Purpose

Immunomodulatory and broad-spectrum antiviral activities have motivated the evaluation of curcumin for Coronavirus infection 2019 (COVID-19) management. Inadequate bioavailability is the main impediment to the therapeutic effects of oral Cur. This study aimed to develop an optimal curcumin transferosome-loaded thermosensitive in situ gel to improve its delivery to the lungs.

Methods

Transferosomes were developed by using 33 screening layouts. The phospholipid concentration as well as the concentration and type of surfactant were considered independent variables. The entrapment efficiency (EE%), size, surface charge, and polydispersity index (PDI) were regarded as dependent factors. A cold technique was employed to develop thermosensitive in-situ gels. Optimized transferosomes were loaded onto the selected gels. The produced gel was assessed based on shape attributes, ex vivo permeability enhancement, and the safety of the nasal mucosa. The in vitro cytotoxicity, antiviral cytopathic effect, and plaque assay (CV/CPE/Plaque activity), and in vivo performance were evaluated after intranasal administration in experimental rabbits.

Results

The optimized preparation displayed a particle size of 664.3 ± 69.3 nm, EE% of 82.8 ± 0.02%, ZP of -11.23 ± 2.5 mV, and PDI of 0.6 ± 0.03. The in vitro curcumin release from the optimized transferosomal gel was markedly improved compared with that of the free drug-loaded gel. An ex vivo permeation study revealed a significant improvement (2.58-fold) in drug permeability across nasal tissues of sheep. Histopathological screening confirmed the safety of these preparations. This formulation showed high antiviral activity against SARS-CoV-2 at reduced concentrations. High relative bioavailability (226.45%) was attained after the formula intranasally administered to rabbits compared to the free drug in-situ gel. The curcumin transferosome gel displayed a relatively high lung accumulation after intranasal administration.

Conclusion

This study provides a promising formulation for the antiviral treatment of COVID-19 patients, which can be evaluated further in preclinical and clinical studies.

Metal/metal oxide-carbohydrate polymers framework for industrial and biological applications: Current advancements and future directions

Recently, the development and consumption of metal/metal oxide carbohydrate polymer nanocomposites (M/MOCPNs) are withdrawing significant attention because of their numerous salient features. Metal/metal oxide carbohydrate polymer nanocomposites are being used as environmentally friendly alternatives for traditional metal/metal oxide carbohydrate polymer nanocomposites exhibit variable properties that make them excellent prospects for a variety of biological and industrial uses. In metal/metal oxide carbohydrate polymer nanocomposites, carbohydrate polymers bind with metallic atoms and ions using coordination bonding in which heteroatoms of polar functional groups behave as adsorption centers. Metal/metal oxide carbohydrate polymer nanocomposites are widely used in woundhealing, additional biological uses and drug delivery, heavy ions removal or metal decontamination, and dye removal. The present review article features the collection of some major biological and industrial applications of metal/metal oxide carbohydrate polymer nanocomposites. The binding affinity of carbohydrate polymers with metal atoms and ions in metal/metal oxide carbohydrate polymer nanocomposites has also been described.

Intranasal Nanotransferosomal Gel for Quercetin Brain Targeting: I. Optimization, Characterization, Brain Localization, and Cytotoxic Studies

Numerous neurological disorders have a pathophysiology that involves an increase in free radical production in the brain. Quercetin (QER) is a nutraceutical compound that shields the brain against oxidative stress-induced neurodegeneration. Nonetheless, its low oral bioavailability diminishes brain delivery. Therefore, the current study aimed to formulate QER-loaded transferosomal nanovesicles (QER-TFS) in situ gel for QER brain delivery via the intranasal route. This study explored the impacts of lipid amount, edge activator (EA) amount, and EA type on vesicle diameter, entrapment, and cumulative amount permeated through nasal mucosa (24 h). The optimum formulation was then integrated into a thermosensitive gel after its physical and morphological characteristics were assessed. Assessments of the optimized QER-TFS showed nanometric vesicles (171.4 ± 3.4 nm) with spherical shapes and adequate entrapment efficiency (78.2 ± 2.8%). The results of short-term stability and high zeta potential value (-32.6 ± 1.4 mV) of QER-TFS confirmed their high stability. Compared with the QER solution, the optimized QER-TFS in situ gel formulation exhibited sustained release behavior and augmented nasal mucosa permeability. CT scanning of rat brains demonstrated the buildup of gold nanoparticles (GNPs) in the brains of all treatment groups, with a greater level of GNPs noted in the rats given the transferosomal gel. Additionally, in vitro studies on PCS-200-014 cells revealed minimal cytotoxicity of QER-TFS in situ gel. Based on these results, the developed transferosomal nanovesicles may be a suitable nanocarrier for QER brain targeting through the intranasal route.

Quality-by-design-based development of ultradeformable nanovesicular transgelosome of standardized Piper longum extract for melanoma

Background: Melanoma is the most aggressive and deadly form of skin cancer. The stratum corneum of the skin is a major obstacle to dermal and transdermal drug delivery. Ultradeformable nanovesicular transferosome has the capacity for deeper skin penetration and its incorporation into hydrogel forms a transgelosome that has better skin permeability and patient compliance. Method: Here, the quality-by-design-based development and optimization of nanovesicular transgelosome of standardized Piper longum fruit ethanolic extract (PLFEE) for melanoma therapy are reported. Results: Compared with standardized PLFEE-loaded plain gel, the transgelosome displayed optimal pharmaceutical properties and improved ex vivo skin permeability and in vivo tumor regression in B16F10 melanoma-bearing C57BL/6 mice. Conclusion: The results reflect the potential of transgelosome for melanoma therapy.

DOE-Assisted Formulation, Optimization, and Characterization of Tioconazole-Loaded Transferosomal Hydrogel for the Effective Treatment of Atopic Dermatitis: In Vitro and In Vivo Evaluation

The present study was performed to determine the therapeutic effects of tioconazole (Tz)-loaded novel transferosome carriers (TFs) for the treatment of atopic dermatitis (AD). Method: Tioconazole transferosomes suspension (TTFs) was formulated and optimized using a 32 factorial design. After that, the optimized batch of TTFs loaded into Carbopol 934 and sodium CMC was prepared with hydrogel and noted as TTFsH. Subsequently, it was evaluated for pH, spread ability, drug content, in vitro drug release, viscosity, in vivo scratching and erythema score, skin irritation, and histopathology study. Result: The optimized batch of TTFs (B4) showed the values of vesicle size, flux, and entrapment efficiency to be 171.40 ± 9.03 nm, 48.23 ± 0.42, and 93.89 ± 2.41, respectively. All batches of TTFsH showed sustained drug release for up to 24 h. The F2 optimized batch released Tz in an amount of 94.23 ± 0.98% with a flux of 47.23 ± 0.823 and followed the Higuchi kinetic model. The in vivo studies provided evidence that the F2 batch of TTFsH was able to treat atopic dermatitis (AD) by reducing the erythema and the scratching score compared to that of the marketed formulation (Candiderm cream, Glenmark). The histopathology study supported the result of the erythema and scratching score study with intact skin structure. It showed that a formulated low dose of TTFsH was safe and biocompatible to both the dermis and the epidermis layer of skin. Conclusion: Thus, a low dose of F2-TTFsH is a promising tool that effectively targeted the skin for the topical delivery of Tz to treat atopic dermatitis symptoms.

Box-Behnken Design: Optimization of Proanthocyanidin-Loaded Transferosomes as an Effective Therapeutic Approach for Osteoarthritis

Transferosomes are one of the vesicular carriers that have received extensive research and attention recently because of their capacity to get beyond the barriers posed by the stratum corneum to penetration. The intent of the current study is to optimize and evaluate proanthocyanidin (PAC) containing transferosomal transdermal gels. PAC-containing transferosomes were prepared using the film hydration method and then loaded into a 4% methylcellulose gel. A 2³ Box-Behnken design was used to optimize the PAC-loaded transferosomal gel, where the effects of phospholipid 90 G (X1), Tween 80 (X2), and sonication time (X3) were evaluated. The formulation factors, such as the drug entrapment efficiency percentage (PEE) and in vitro drug release, were characterized. A PEE of 78.29 ± 1.43% and a drug release in vitro at 6 h of 24.2 ± 1.25% were obtained. The optimized transferosomal-loaded proanthocyanidin (OTP) formulation penetrated the porcine skin at an excellent rate (0.123 ± 0.0067 mg/cm²/h). Stability tests were conducted for OTP to predict the effects of various temperature conditions on the physical appearance, drug content, and PEE for periods of 15, 30, and 45 days. Finally, this transferosomal system for transdermal PAC delivery may be a suitable alternative to the conventional treatment for osteoarthritis.

Microemulsions formed by PPG-5-CETETH-20 at low concentrations for transdermal delivery of nifedipine: Structural and in vitro study

Nifedipine is a potent anti-hypertensive, which is poorly orally bioavailable on account of first-pass metabolism, short half-life, and low water solubility. This study aimed to develop a microemulsified system with low surfactant concentration and to evaluate the influence of microemulsion (ME) phase behavior on skin permeation of nifedipine, as drug model. Thereafter, MEs were obtained using PPG-5-CETETH-20, oleic acid, and phosphate buffer at pH 5.0. The selected MEs were isotropic, with droplet diameters less than 10 nm, polydispersity index < 0.25, and pH between 5.0 and 5.2. MEs presented low viscosity and Newtonian behavior. SAXS results confirmed bicontinuous and oil-in-water (o/w) MEs formation. The presence of the drug promoted only very slight modifications in the ME structure. The MEs presented ability to deliver nifedipine via the transdermal route when in comparison with the control. Nevertheless, the skin permeated and retained amounts from the o/w and bicontinuous formulations did not differ significantly. The ATR-FTIR demonstrated that both formulations promoted fluidization and disorganization of lipids and increased the drug diffusion and partition coefficients in the skin. In conclusion, PPG-5-CETETH-20 MEs obtained proved to be effective skin permeation enhancers, acting by rising the coefficients of partition and diffusion of the nifedipine in the skin.

Novel Gels: An Emerging Approach for Delivering of Therapeutic Molecules and Recent Trends

Gels are semisolid, homogeneous systems with continuous or discrete therapeutic molecules in a suitable lipophilic or hydrophilic three-dimensional network base. Innovative gel systems possess multipurpose applications in cosmetics, food, pharmaceuticals, biotechnology, and so forth. Formulating a gel-based delivery system is simple and the delivery system enables the release of loaded therapeutic molecules. Furthermore, it facilitates the delivery of molecules via various routes as these gel-based systems offer proximal surface contact between a loaded therapeutic molecule and an absorption site. In the past decade, researchers have potentially explored and established a significant understanding of gel-based delivery systems for drug delivery. Subsequently, they have enabled the prospects of developing novel gel-based systems that illicit drug release by specific biological or external stimuli, such as temperature, pH, enzymes, ultrasound, antigens, etc. These systems are considered smart gels for their broad applications. This review reflects the significant role of advanced gel-based delivery systems for various therapeutic benefits. This detailed discussion is focused on strategies for the formulation of different novel gel-based systems, as well as it highlights the current research trends of these systems and patented technologies.

Self-Assembling Drug Formulations with Tunable Permeability and Biodegradability

This review focuses on key topics in the field of drug delivery related to the design of nanocarriers answering the biomedicine criteria, including biocompatibility, biodegradability, low toxicity, and the ability to overcome biological barriers. For these reasons, much attention is paid to the amphiphile-based carriers composed of natural building blocks, lipids, and their structural analogues and synthetic surfactants that are capable of self-assembly with the formation of a variety of supramolecular aggregates. The latter are dynamic structures that can be used as nanocontainers for hydrophobic drugs to increase their solubility and bioavailability. In this section, biodegradable cationic surfactants bearing cleavable fragments are discussed, with ester- and carbamate-containing analogs, as well as amino acid derivatives received special attention. Drug delivery through the biological barriers is a challenging task, which is highlighted by the example of transdermal method of drug administration. In this paper, nonionic surfactants are primarily discussed, including their application for the fabrication of nanocarriers, their surfactant-skin interactions, the mechanisms of modulating their permeability, and the factors controlling drug encapsulation, release, and targeted delivery. Different types of nanocarriers are covered, including niosomes, transfersomes, invasomes and chitosomes, with their morphological specificity, beneficial characteristics and limitations discussed.

Applications of innovative technologies to the delivery of antipsychotics

Psychosis is a high-incidence pathology associated with a profound alteration in the perception of reality. The limitations of drugs available on the market have stimulated the search for alternative solutions to achieve effective antipsychotic therapies. In this review, we evaluate innovative formulations of antipsychotic drugs developed through the application of modern pharmaceutical technologies, including classes of micro and nanocarriers, such as lipid formulations, polymeric nanoparticles (NPs), solid dispersions, and cyclodextrins (CDs). We also consider alternative routes of administration to the oral and parenteral ones currently used. Improved solubility, stability of preparations, and pharmacokinetic (PK) and pharmacodynamic (PD) parameters confirm the potential of these new formulations in the treatment of psychotic disorders.

A transferosome-loaded bigel for enhanced transdermal delivery and antibacterial activity of vancomycin hydrochloride

Transdermal drug delivery is an attractive route of administration relative to other routes as it offers enhanced therapeutic efficacy. However, due to poor skin permeability of certain drugs, their application in transdermal delivery is limited. The ultra-deformable nature of transferosomes makes them suitable vehicles for transdermal delivery of drugs that have high molecular weights and hydrophilicity. However, their low viscosity, which leads to low contact time on the surface of the skin, has restricted their application in transdermal delivery. Therefore, this study aimed to deliver transferosomes loaded with a highly water-soluble and high molecular weight vancomycin hydrochloride (VCM-HCl) via a bigel for systemic delivery and treatment of microbial infections. VCM-HCl-loaded transferosomal formulations (TNFs) were prepared using a reverse-phase evaporation method and then loaded into a bigel. Both the TNFs and TNFs-loaded bigel (TNF-L-B) were characterized by a range of in vitro and ex vivo techniques. TNFs and TNF-L-B were tested for biosafety via the MTT assay and found to be biosafe. Prepared TNFs had sizes, zeta potential and entrapment efficiency of 63.02 ± 5.34 nm, -20.93 ± 6.13 mV and 84.48 ± 1.22% respectively. VCM-HCl release from TNF-L-B showed a prolonged release profile with 39.76 ± 1.6% after 24hrs when compared to bare VCM-HCl loaded in the bigel (74.81 ± 8.84%). Ex-vivo permeation of prepared TNF-L-B showed a higher permeation flux of 0.56 µg/cm²/h compared to the bare VCM-HCl-loaded bigel of 0.23 µg/cm²/h, indicating superior permeation and bioavailability of the drug. Additionally, the prepared TNF-L-B demonstrated improved antimicrobial activity. The TNF-L-B showed minimum inhibitory concentrations (MIC) of 0.97 μg/ml against Staphylococcus aureus (SA) and 1.95 μg/ml against methicillin-resistant SA (MRSA), which were 2-fold lower MIC values than the bare drug. The time-kill assay showed that both TNFs and TNF-L-B systems caused a 5.6-log reduction (100%) in MRSA compared to bare VCM-HCl after 24 hrs of incubation. Furthermore, as opposed to the bare VCM-HCl solution, the degree of biofilm reduction caused by TNFs (55.72%) and TNF-L-B (34.58%) suggests their dominance in eradicating MRSA biofilm. These findings indicate that TNF-L-B is a promising system for transdermal delivery of hydrophilic and high molecular weight drugs.

Recent Advances in Nanomaterials for Dermal and Transdermal Applications

The stratum corneum, the most superficial layer of the skin, protects the body against environmental hazards and presents a highly selective barrier for the passage of drugs and cosmetic products deeper into the skin and across the skin. Nanomaterials can effectively increase the permeation of active molecules across the stratum corneum and enable their penetration into deeper skin layers, often by interacting with the skin and creating the distinct sites with elevated local concentration, acting as reservoirs. The flux of the molecules from these reservoirs can be either limited to the underlying skin layers (for topical drug and cosmeceutical delivery) or extended across all the sublayers of the epidermis to the blood vessels of the dermis (for transdermal delivery). The type of the nanocarrier and the physicochemical nature of the active substance are among the factors that determine the final skin permeation pattern and the stability of the penetrant in the cutaneous environment. The most widely employed types of nanomaterials for dermal and transdermal applications include solid lipid nanoparticles, nanovesicular carriers, microemulsions, nanoemulsions, and polymeric nanoparticles. The recent advances in the area of nanomaterial-assisted dermal and transdermal delivery are highlighted in this review.

Liposomes and transferosomes: a breakthrough in topical and transdermal delivery

The topical and transdermal routes of drug administration are long known to the field of pharmaceutics. These routes have been explored for the delivery of a wide range of therapeutic agents over centuries. However, the anatomy of the skin and the physicochemical properties of molecules limit their transport via these routes. To overcome these challenges, a nano-phospholipid carrier called liposome was developed in the 1960s. Liposomal delivery of drugs was reported to be limited to the upper layers of skin. This led to the development of self-regulating and self-adaptable vesicles known as transfersomes. This review critically evaluates the barriers in delivery across the skin, recent advancements in liposomes, transfersomes and their impact in the pharmaceutical field.

Allopurinol Loaded Transferosomes for the Alleviation of Symptomatic After-effects of Gout: An Account of Pharmaceutical Implications

Background:

The present study assessed the transdermal potential of transferosomes loaded with allopurinol for the treatment of gout.

Methods:

Transferosomes of allopurinol were composed of different ratios of tween-80, soya lecithin and solvent using a thin-film hydration method. Transferosomes were characterized for Scanning Electron Microscopy (SEM), zeta potential, % entrapment efficiency (%EE), Fourier Transform Infrared Spectroscopy (FTIR), in-vitro drug release and kinetics as well as stability. Then, optimized formulation was incorporated in gel and evaluated for viscosity, pH, extrudability, homogeneity, skin irritation study, spreadability, ex vivo skin permeation study, flux, and stability.

Results:

SEM studies suggested that vesicles were spherical and zeta potential were in the range of -11.4 mV to -29.6 mV and %EE was 52.4- 83.87%. FTIR study revealed that there was no interaction between allopurinol and excipients during the preparation of transferosomes. The cumulative percentage of drug release from various transferosomes was ranged from 51.87 to 81.87%. A transferosomal gel of F8 formulation was prepared using dispersion method reported pseudoplastic rheological behavior, optimum pH, spreadability and maximum drug permeation i.e. 79.84% with flux 13.06 g/cm2/hr, followed zero-order release kinetics. Irritation and in-vivo studies of optimized transferosomal gel G8 on rabbits revealed better results than the standard allopurinol.

Conclusion:

This research suggested that allopurinol loaded transferosomal gel can be potentially used as a transdermal drug delivery system for the treatment of gout.

A Novel Eutectic-Based Transdermal Delivery System for Risperidone

This paper reports for the first time the possible formation of a novel room temperature therapeutic deep eutectic solvent (THEDES) of risperidone (RIS) with some fatty acids, namely capric acid (C10; CA), lauric acid (C12; LA), and myristic acid (C14; MA). All mixtures of RIS and MA yielded a solid or pasty-like solid and were readily discarded. Some of the prepared THEDESs from RIS and CA or LA have spontaneously transformed into a transparent liquid, without any precipitate at room temperature by simple physical mixing of the components. From the DSC thermograms, phase diagrams of the eutectic systems were constructed and the lowest obtained melting point for a RIS:CA mixture was 17°C at 40:60% w/w ratio. While 22°C was recorded as the lowest melting point for RIS:LA at a ratio of 30:70% w/w, solubility improvement of RIS was up to 70,000-fold compared with water. Freeze-drying microscopy provided valuable information regarding the phase change and transitions the drug undergoes as a function of temperature and it clarifies the interpretation of the DSC results and provides valuable evidence of drug crystals co-melting within the fatty acid base. The presence of natural fatty acid as one component of THEDES and the depression in the melting point significantly (P < 0.05) enhanced RIS skin permeation. Rheological studies showed a viscosity temperature dependency of the DES and well fitted to the Arrhenius equation. Application of the obtained THEDES on the shaved skin of rats revealed the absence of any irritation or edema effects.

Human skin models: From healthy to disease-mimetic systems; characteristics and applications

Skin drug delivery is an emerging route in drug development, leading to an urgent need to understand the behaviour of active pharmaceutical ingredients within the skin. Given, As one of the body's first natural defences, the barrier properties of skin provide an obstacle to the successful outcome of any skin drug therapy. To elucidate the mechanisms underlying this barrier, reductionist strategies have designed several models with different levels of complexity, using non-biological and biological components. Besides the detail of information and resemblance to human skin in vivo, offered by each in vitro model, the technical and economic efforts involved must also be considered when selecting the most suitable model. This review provides an outline of the commonly used skin models, including healthy and diseased conditions, in-house developed and commercialized models, their advantages and limitations, and an overview of the new trends in skin-engineered models.

Schizophrenia; A Review on Promising Drug Delivery Systems

Background:

Schizophrenia belongs to mental illnesses affecting 1% of the worldwide population. Its therapy is still unmet; thus, researchers aimed to develop new pharmacological molecules which can improve its management.

Methods:

Moreover, the current typical and atypical antipsychotics should be formulated in more efficacious systems that can deliver the drug in the brain with as few side effects as possible. Further, the development of long-acting efficient drug delivery systems could be significant in minimizing frequent dosing which is nonpreferred to schizophrenics.

Results:

Herein, authors focused on current developments of antipsychotic medications used in schizophrenia management. Various studies, which include the use of first and second-generation antipsychotics, were analyzed according to their efficacy. In fact, in this review, oral, injectable, transdermal and intranasal formulations entrapped antipsychotics are presented to be valuable guidance for scientists to formulate more effective drug delivery systems for schizophrenic patients.

Conclusions:

This review aimed to assist researchers working on schizophrenia management by summarizing current medications and newly synthesized drug delivery systems recently found in the literature.

Formulation of Nanospanlastics as a Promising Approach for ‎Improving the Topical Delivery of a Natural Leukotriene Inhibitor (3-‎Acetyl-11-Keto-β-Boswellic Acid): Statistical Optimization, in vitro ‎Characterization, and ex vivo Permeation Study

Purpose

The current study aimed to discuss the potential of nanospanlastics as a surfactant-based vesicular system for improving the topical delivery of 3-acetyl-11-keto-β-boswellic acid (AKBA). AKBA is a potent anti-inflammatory drug, but it has poor oral bioavailability due to its poor aqueous solubility. Moreover, the topical delivery of AKBA is difficult due to its high lipophilicity. To overcome these drawbacks, AKBA was formulated as deformable elastic nanovesicles and nanospanlastics, for improving its topical delivery.

Materials and Methods

AKBA-loaded spanlastic nanovesicles (SNVs) were formulated by ethanol injection technique according to 2³ factorial design using Span 60 as a non-ionic surfactant and Tween 80 as edge activator (EA) to investigate the effect of different independent variables on entrapment efficiency (EE%), % drug released after 8 hr (Q_8h) and particle size (PS) using Design-Expert software. In vitro characterization, stability test and ex vivo permeation study of the optimized formula were performed.

Results

The choice of the optimized formula was based on the desirability criteria.‎ F7 was selected as the optimized formula because it has the highest desirability value of 0.648. F7 exhibited EE% of 90.04±0.58%, Q_8h of 96.87±2.67%, PS of 255.8±2.67 nm, and zeta potential of −49.56 mV. F7 appeared as spherical well-defined vesicles in both scanning electron microscope (SEM) and transmission electron microscope (TEM). The Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies investigated the absence of interaction between AKBA and ‎different excipients and good encapsulation of AKBA within SNVs. F7 retained both physical and chemical stability after storage for 3 months at 4–8 °C. Ex vivo permeation test exhibited significant enhancement of permeability of F7 across rat skin than the free drug.

Conclusion

Nanospanlastics could be a promising approach for improving the permeability and topical delivery of AKBA.

Factors affecting the morphology of some organic and inorganic nanostructures for drug delivery: characterization, modifications, and toxicological perspectives

Introduction: In this review, we aim to highlight the impact of various processes and formulation variables influencing the characteristics of certain surfactant-based nanoconstructs for drug delivery. Areas covered: The review includes the discussion on processing parameters for the preparation of nanoconstructs, especially those made up of surfactants. Articles published in last 15 years (437) were reviewed, 381 articles were selected for data review and most appropriate articles (215) were included in article. Effect of variables such as surfactant concentration and type, membrane additives, temperature, and pH-dependent transitions on morphology has been highlighted along with effect of shape on nanoparticle uptake by cells. Various characterization techniques explored for these nanostructures with respect to size, morphology, lamellarity, distribution, etc., and a separate section on polymeric vesicles and the influence of block copolymers, type of block copolymer, control of block length, interaction of multiple block copolymers on the structure of polymersomes and chimeric nanostructures have been discussed. Finally, applications, modification, degradation, and toxicological aspects of these drug delivery systems have been highlighted. Expert opinion: Parameters influencing the morphology of micelles and vesicles can directly or indirectly affect the efficacy of small molecule cellular internalization as well as uptake in the case of biologicals.[Figure: see text].

Fabrication of Transgelosomes for Enhancing the Ocular Delivery of Acetazolamide: Statistical Optimization, In Vitro Characterization, and In Vivo Study

Acetazolamide (ACZ) is a potent carbonic anhydrase inhibitor that is used for the treatment of glaucoma. Its oral administration causes various undesirable side effects. This study aimed to formulate transgelosomes (TGS) for enhancing the ocular delivery of ACZ. ACZ-loaded transfersomes were formulated by the ethanol injection method, using phosphatidylcholine (PC) and different edge activators, including Tween 80, Span 60, and Cremophor RH 40. The effects of the ratio of lipid to surfactant and type of surfactant on % drug released after 8 h (Q_8h) and entrapment efficiency (EE%) were investigated by using Design-Expert software. The optimized formula was formulated as TGS, using poloxamers as gelling agents. In vitro and in vivo characterization of ACZ-loaded TGS was performed. According to optimization study, F8 had the highest desirability value and was chosen as the optimized formula for preparing TGS. F8 appeared as spherical elastic nanovesicles with Q_8h of 93.01 ± 3.76% and EE% of 84.44 ± 2.82. Compared to a free drug, TGS exhibited more prolonged drug release of 71.28 ± 0.46% after 8 h, higher ex vivo permeation of 66.82 ± 1.11% after 8 h and a significant lowering of intraocular pressure (IOP) for 24 h. Therefore, TGS provided a promising technique for improving the corneal delivery of ACZ.

Development of novel pH-sensitive nanoparticles loaded hydrogel for transdermal drug delivery

OBJECTIVE

Difference of pH that exists between the skin surface and blood circulation can be exploited for transdermal delivery of drug molecules by loading drug into pH-sensitive polymer. Eudragit S100 (ES100), a pH-sensitive polymer having dissolution profile above pH 7.4, is used in oral, ocular, vaginal and topical delivery of drug molecules. However, pH-sensitive potential of this polymer has not been explored for transdermal delivery. The aim of this research work was to exploit the pH-sensitive potential of ES100 as a nanocarrier for transdermal delivery of model drug, that is, Piroxicam.

METHODS

Simple nanoprecipitation technique was employed to prepare the nanoparticles and response surface quadratic model was applied to get an optimized formulation. The prepared nanoparticles were characterized and loaded into Carbopol 934 based hydrogel. In vitro release, ex vivo permeation and accelerated stability studies were carried out on the prepared formulation.

RESULTS

Particles with an average size of 25-40 nm were obtained with an encapsulation efficiency of 88%. Release studies revealed that nanoparticles remained stable at acidic pH while sustained release with no initial burst effect was observed at pH 7.4 from the hydrogel. Permeation of these nanocarriers from hydrogel matrix showed significant permeation of Piroxicam through mice skin.

CONCLUSION

It can be concluded that ES100 based pH-sensitive nanoparticles have potential to be delivered through transdermal route.