Validation of quantitative light-induced fluorescence-digital (QLF-D) for the detection of approximal caries in vitro

Validity assessment of a third-generation light-induced fluorescence device in detecting proximal and occlusal caries lesions: A cross-sectional study

OBJECTIVES

The objective of this study was to evaluate the efficacy of a quantitative light-induced fluorescence (QLF) device (QrayCam Pro, AIOBIO, Seoul, Republic of Korea) in detecting and differentiating the severity of posterior proximal and occlusal primary caries.

MATERIALS AND METHODS

The study included a total of 120 teeth in 60 patients (of both genders, aged between 21 and 38 years) between January and March 2024, one carious tooth and one sound tooth were selected at random in each patient. All occlusal surfaces were evaluated in accordance with the International Caries Detection and Assessment System (ICDAS) Nyvad Criteria, using the visual tactile method. The ICDAS employs a scoring system ranging from 0 to 6, while the Nyvad Criteria employs a similar scoring system. Addionally, the depth of the proximal lesions was scored (0-6) using bite-wing radiography. The quantitative values representing the maximum loss of fluorescence (∆Fmax) and the maximum change in the ratio of red and green fluorescence (∆Rmax) were obtained using the Q-ray Clinical software v 1.45. To assess the validity, the sensitivity, specificity, and area under the receiver operating characteristics curve (AUROC) were calculated. Spearman correlation coefficient was used to investigate the correlation between the findings of the traditional and QLF examination methods.

RESULTS

The AUROC values for both ∆Fmax and ∆Rmax were found to be excellent. The sensitivity of QrayCam Pro was found to be 84-88.6%, while the specificity was 100%. The correlation analysis demonstrated a strong correlation between scores obtained from the traditional examination and the QLF values.

CONCLUSIONS

Based on the findings of this study, QrayCam Pro exhibits potential as a valuable additional tool for not only detecting caries but also for assessing their severity and activity.

CLINICAL RELEVANCE

This study revealed that QrayCam Pro might be suggested as a precise tool for enhancing caries detection and assessment compared to traditional methods. By providing quantitative data on caries severity and activity, it enables more informed treatment decisions, potentially optimizing outcomes for patients.

Enhanced Clinical Decision-Making and Delivery of Minimally Invasive Care Using the ICCMS4D Integrated with Hands-Free Fluorescence-Based Loupes and a Chemomechanical Caries Removal Agent

The purpose of this case report was to evaluate an approach for enhanced clinical decision-making while providing minimally invasive treatment, using the combined International Caries Classification and Management System (ICCMS 4D) with hands-free fluorescence-enhanced loupes (Reveal, Designs for Vision Inc., New York City, NY, United States) and a chemo-mechanical caries removal agent (Papacárie Duo Gel, Formula & Acao, Sao Paulo, Brazil). In recent decades, a shift towards a conservative approach to caries management has developed. The use of adequate operative techniques and correct decision-making are of paramount importance for early caries detection and tooth-preserving operative care. The use of noninvasive fluorescence-based adjuncts for enhanced diagnostic accuracy has gained popularity. Fluorescence describes the absorption of photons by a molecule, followed by its partial emission at a longer wavelength. Fluorescence detection of bacterial activity is largely based on the red/orange fluorescence emanating from bacterial metabolism, and has been shown to be found particularly in active caries and mature anaerobic plaque. The combined approach of using the standardized visual International Caries Detection and Assessment System (ICDAS) with fluorescence as an operative adjunct was shown to enhance the advantages of both systems. The approach may potentially increase detection sensitivity without compromising the specificity of the visual tactile method. A recent hands-free device is aimed to combine simultaneous diagnosis and therapy (theragnosis) using fluorescence, while overcoming possible obstacles to workflow continuity. The "Reveal" fluorescence-enhanced loupes are fitted with a dual white light/fluorescence light, and are said to allow the clinician to conduct any operational procedure with optional fluorescence guidance, from detection to caries removal, to treatment completion. Using the described method, a comprehensive pathway that emphasizes evidence-based information, correct clinical decision-making, and a minimally invasive therapeutic approach was proposed. The approach may represent a potential advancement in providing minimally invasive caries care.

Current Approaches to Diagnosis of Early Proximal Carious Lesion: A Literature Review

Integrating technological tools with clinical visual examination for caries detection and diagnosis can improve preventative measures in dentistry, resulting in decreased treatment expenses and reduced time and costs associated with testing potential anticaries agents. This article provides an overview of the conventional and new emerging modern technologies that can assist dental professionals in the early detection and diagnosis of dental caries. These technologies aid in assessing the progression of carious lesions and monitoring them quantitatively or qualitatively over time. Traditional techniques (visual, tactile, and radiographic) have limitations in diagnosing early proximal caries accurately. Novel methods like fluorescence and transillumination, as well as advanced tools like OCT (optical coherence tomography), laser fluorescence, and QLF (quantitative light-induced fluorescence), are effective for early caries detection. Optical methods like fluorescence and transillumination are particularly successful in identifying initial caries stages. Moreover, this review highlights the clinical relevance of these methods and discusses potential future technologies like terahertz imaging and artificial intelligence (AI)-based approaches.

Integrated Multiplex Sensing Clear Aligner for In Situ Monitoring of Dental Enamel Demineralization

Clear aligners have become one of the most important tools in orthodontic treatment. However, over a lengthy period of orthodontic treatment, enamel demineralization or even dental caries could be susceptible for occurrence. Therefore, early diagnosis of enamel demineralization has been widely investigated. Nevertheless, for reasons including bulky monitoring equipment and complexity of operation, few techniques reported to date possessed clinical utility. The combination of flexible electronics and electrochemical sensing technology presented a promising strategy. Herein, an integrated multiplex sensing clear aligner (IMSCA) system, including a clear aligner with a multiplex sensor array patch, was developed for in situ monitoring of Ca²⁺, pH, and PO₄^3- in the oral environment to provide a foundation for early diagnosis of enamel demineralization. The IMSCA exhibited a broad linear response range, great selectivity, temporal stability, reproducibility, and biological safety. Results of enamel demineralization simulating experiments and human permanent tooth demineralization experiments validate the capability of the IMSCA to indicate the occurrence of enamel demineralization. All results ultimately point to the promising clinical utility of the IMSCA, which facilitates the quantitative characterization of enamel demineralization in complex oral environments. This study provides a novel strategy in the early diagnosis of enamel demineralization.

Accuracy of different approaches for detecting proximal root caries lesions in vitro

OBJECTIVES

The objective was to evaluate the diagnostic accuracy of radiographic evaluation (XR), visual-tactile assessment (VT), laser-fluorescence (LF) (DIAGNOdent Pen/KaVo), and near-infrared-light transillumination (NILT) (DIAGNOcam/KaVo) on proximal root caries lesions in vitro.

METHODS

Two-hundred extracted permanent premolars and molars with and without proximal root caries lesions were allocated to 50 diagnostic models simulating the proximal contacts between teeth and mounted in a phantom dummy head. Two independent examiners used the diagnostic approaches to detect any or advanced root caries lesions, with histologic evaluation of the lesions serving as reference. Receiver operating characteristic (ROC) curves were employed, and sensitivity, specificity, and the area under the ROC curve (AUC) are calculated. Significant differences in mean AUCs between approaches were assumed if p < 0.05 (two-sample t-test).

RESULTS

NILT was not applicable for proximal root caries detection. The sensitivity/specificity to detect any lesions was 0.81/0.63 for XR, 0.76/0.88 for VT and 0.81/0.95 for LF, and the sensitivity/specificity to detect advanced lesions was 0.43/0.94 for XR, 0.66/0.99 for VT, and 0.83/0.78 for LF, respectively. For both, any and advanced root caries lesions, mean AUCs for LF and VT were significantly higher compared to XR (p < 0.05). For any root caries lesions, LF was significantly more accurate than VT (p = 0.01), but not for advanced root caries lesions (p = 0.59).

CONCLUSIONS

Under the in vitro conditions chosen, LF and VT were more accurate than XR to detect proximal root caries lesions, with LF being particularly useful for initial lesion stages.

CLINICAL RELEVANCE

LF might be a useful diagnostic aid for proximal root caries diagnosis. Clinical studies are necessary to corroborate the findings.

Red Marine Algae Lithothamnion calcareum Supports Dental Enamel Mineralization

The current management of oral conditions such as dental caries and erosion mostly relies on fluoride-based formulations. Herein, we proposed the use of the remaining skeleton of Lithothamnion calcareum (LC) as an alternative to fluorides. LC is a red macroalgae of the Corallinales order, occurring in the northeast coast of Brazil, whose unique feature is the abundant presence of calcium carbonates in its cell walls. Two experimental approaches tested the general hypothesis that LC could mediate enamel de-remineralization dynamics as efficiently as fluorides. Firstly, the effect of LC on enamel de-mineralization was determined in vitro by microhardness and gravimetric measurements to test the hypothesis that LC could either prevent calcium/phosphate release from intact enamel or facilitate calcium/phosphate reprecipitation on an artificially demineralized enamel surface. Subsequently, an in situ/ex vivo co-twin control study measured the effect of LC on the remineralization of chemical-demineralized enamel using microhardness and quantitative light-induced fluorescence. With this second experiment, we wanted to test whether outcomes obtained in experiment 1 would be confirmed by an in situ/ex vivo co-twin control model. Both experiments showed that LC exhibited equivalent or superior ability to modulate enamel de-remineralization when compared to fluoride solution. LC should be explored as an alternative to manage oral conditions involving the enamel demineralization.

Lesion activity assessment of early caries using dye-enhanced quantitative light-induced fluorescence

We aimed to determine whether dye-enhanced quantitative light-induced fluorescence (DEQLF), wherein porous structure of caries lesions is stained with a fluorescent dye, could quantitatively distinguish between active and inactive caries. A total of 126 bovine specimens were prepared to artificially simulate caries activity. Active caries were demineralized with 1% carbopol solution for 3 (A3), 5 (A5), and 10 days (A10). For inactive caries, half specimens in each group were remineralized with 2% NaF and reallocated into three groups (I3, I5, and I10, respectively). Wet specimens were dried with compressed air for 10 s and then dyed with 100-µM sodium fluorescein for 10 s. Fluorescence images of speicmens were captured with a QLF-digital 2 + Biluminator. Fluorescence intensity (ΔG) was measured in fluorescence images of dyed specimens. ΔG between active and inactive groups was compared using independent t-test, and ΔG among active groups (or inactive groups) were compared using ANOVA (α = 0.05). ΔG in the active groups was 33.7-59.0 higher than that in the inactive groups (P < 0.001). Except between I3 and I5, there was significant differences in ΔG according to the demineralization period (P < 0.001). DEQLF might be used to evaluate early caries activity, and longitudinally monitor changes in lesion activity.

Evaluation of dental caries detection with quantitative light-induced fluorescence in comparison to different field of view devices

This study evaluated dental caries detection ability between the Qraycam and Qraypen on the same dental caries lesions. A total of 178teeth from 61patients were imaged using Qraypen C®(QC) and Qraycam Pro®(QP) devices and evaluated using analysis software (QA2). Occlusal, secondary, and proximal dental caries were evaluated and scored according to International Caries Detection and Assessment System(ICDAS II) and X-ray criteria. Bland–Altman plots were used to compare quantitative light-induced fluorescence(QLF) parameters obtained from the different QLF devices. Sensitivity, specificity, and area under the receiver operating characteristic curve(AUROC) were calculated. The ΔF_aver. of the QLF-parameters showed that the mean difference between the two different QLF devices was close to zero and that the ± 5 error value was included in the mean ± 1.96SD range for the detection of dental caries. The accuracies for diagnosing occlusal dental caries were 0.83–0.96 and 0.81–0.82 and the accuracies for diagnosing proximal dental caries were 0.52–0.62 and 0.52–0.71 for the QC and QP devices, respectively. In conclusion, the ΔF_aver. obtained from the QP showed diagnostic value mainly for screening of demineralized teeth. For teeth selected through screening, the depth of the lesion must be precisely evaluated using additional QP and radiographic imaging.

Validation of clinical photography and a laser fluorescence device for assessment of enamel demineralization during multi-bracketed fixed orthodontic treatment

AIM

To compare the validity of DIAGNOdent pen™ 2190 and clinical photographs in the diagnosis (presence or absence) and assessment of white spot lesions (WSLs) during multi-bracketed fixed orthodontic treatment.

METHODS

A total of 1607 readings from 99 patients were obtained using DIAGNOdent pen™ 2190, clinical photographs, and visual assessment criteria to assess WSLs at 6 -, 12- and 18 months after bonding of brackets. Receiver operating characteristic curves were constructed, and areas under the curve (AUC) were calculated to assess the presence or absence of WSLs and distinguish the severity of WSLs as slight or severe. Sensitivities, specificities, and AUC were calculated for outcomes at an alpha of 0.05 and 95% confidence intervals (CIs).

RESULTS

The values of sensitivity and specificity of DIAGNOdent pen™ 2190 were found to be 0.78 and 0.83, respectively, to distinguish presence/absence of WSLs with good accuracy (AUC= 0.855; 95% CI: 0.820-0.889) and for digital photographs, accuracy was excellent (AUC= 0.973, 95% CI: 0.956-0.991) with sensitivity and specificity of 0.96 and 0.99, respectively. However, the accuracy of DIAGNOdent pen™ 2190 was poor (AUC= 0.543, 95% CI: 0.418-0.668) in delineating slight and severe WSLs with a sensitivity of 0.31 and specificity of 0.83; while the values of sensitivity and specificity for distinguishing slight or severe lesions for clinical photographs were 0.96 and 0.99, respectively with excellent accuracy (AUC=0.978, 95% CI: 0.936-1.000).

CONCLUSIONS

Clinical photographs had better validity than DIAGNOdent pen™ 2190 in diagnosis and assessment of severity of demineralized lesions during multi-bracketed fixed orthodontic treatment.

Emerging Technologies for Dentin Caries Detection-A Systematic Review and Meta-Analysis

This systematic review and meta-analysis aimed at assessing the diagnostic accuracy of emerging technologies, such as laser fluorescence (LF), transillumination, light-emitting diode devices, optical coherence tomography (OCT), alternating current impedance spectroscopy, fluorescence cameras (FC), photo-thermal radiometry, and modulated luminescence technology. In vivo and in vitro results of such non-ionizing, non-invasive, and non-destructive methods' effectiveness in non-cavitated dentin caries detection are sometimes ambiguous. Following the PRISMA guidelines, 34 relevant research articles published between 2011-2021 were selected. The risk of bias was assessed with a tool tailored for caries diagnostic studies, and subsequent quantitative uni- and bi-variate meta-analysis was carried out in separate sub-groups according to the investigated surface (occlusal/proximal) and study setting (in vivo/in vitro). In spite of the high heterogeneity across the review groups, in vitro studies on LF and FC proved a good diagnostic ability for the occlusal surface, with area under the curve (AUC) of 0.803 (11 studies) and 0.845 (five studies), respectively. OCT studies reported an outstanding performance with an overall AUC = 0.945 (four studies). Promising technologies, such as OCT or FC VistaProof, still need well-designed and well-powered studies to accrue experimental and clinical data for conclusive medical evidence, especially for the proximal surface. Registration: INPLASY202210097.

Evaluation of quantitative light-induced fluorescence to assess lesion depth in cavitated and non-cavitated root caries lesions - An in vitro study

BACKGROUND

This in vitro study aimed to assess carious lesions on root surfaces using quantitative light-induced fluorescence (QLF) and to compare the readings with axial lesion depth on µCT.

METHODS

The root surfaces of 107 extracted human teeth were included after visual-tactile inspection. For further analysis, the following parameters were assessed: clinical findings (non-cavitated: leathery or hard, cavitated), QLF- (QLF-D Biluminator 2+), and µCT-images (Bruker Skyscan 1172). The shape of the undamaged tooth surface of the cavitated lesions was virtually re-constructed during µCT analysis. Clinical surface texture,% fluorescence loss, and lesion depth (µCT) were determined.

STATISTICAL ANALYSIS

chi²-test, Spearman-Rho test, regression analysis.

RESULTS

∆F was significantly lower in non-cavitated leathery (-50.37 ± 15.10) and cavitated (-61.23 ± 9.92) compared to non-cavitated surfaces with a hard texture (-17.04 ± 16.10, p < 0.01). For non-cavitated surfaces, a negative correlation was observed between ∆F and lesion depth in µCT images regardless of texture (-0.748, p < 0.01). Regression analysis revealed that ∆F predicted lesion depth in µCT for non-cavitated surfaces (β: 0.703, CI95: 0.67--0.43, p < 0.01).

CONCLUSION

The percentage of fluorescence loss (∆F) in QLF predicted lesion depth of non-cavitated demineralized root surfaces. Therefore, QLF can be recommended for estimating the lesion depth of carious root lesions and seems to expand the possibilities of follow-up and lesion monitoring, especially for non-cavitated surfaces.

The diagnostic efficacy of quantitative light-induced fluorescence in detection of dental caries of primary teeth

OBJECTIVES

To evaluate a quantitative light-induced fluorescence (QLF) caries detection method using a portable device under clinical conditions and present a QLF scoring index (QS-index) for primary teeth.

METHODS

A total of 878 tooth surfaces (proximal and occlusal) of 44 children were studied. After visual inspection and radiographic examination, images of dental caries captured with the QLF device were classified according to caries progression stages and analyzed with a specialized software. Cut-off values, sensitivity, specificity, and area under the receiver operating characteristic curve (AUROC) were calculated for the QLF parameters: fluorescence loss (ΔF) and bacterial activity (ΔR). The reliability of logistic regression model to combine ΔF and ΔR was evaluated by the AUROC.

RESULTS

QLF parameters showed a good sensitivity (0.72-0.91), specificity (0.74-0.96), and AUROC (0.861-0.940). The AUROC of logistic regression model (0.90-0.957) was higher than ΔF or ΔR average alone in all types of carious lesions. Every level of the QS-index was properly defined to represent the progression of dental caries with corresponding statistical significance.

CONCLUSIONS

The reliability of QLF for dental caries detection in primary teeth was similar to or slightly higher than that of the traditional diagnostic methods of visual inspection or radiographic examination in clinical conditions.

CLINICAL SIGNIFICANCE

The results of QLF were reliable in detecting all types of dental caries in primary teeth. The QLF method can provide visual images as well as quantitatively analyze the carious lesion.

The Effectiveness of a Quantitative Light-induced Fluorescent Device for the Diagnosis of a Cracked Tooth: A Case Report

Diagnosing a cracked tooth is a challenge for dental clinicians. This report describes the use of a quantitative light-induced fluorescent (QLF) device that detects fluorescence reactions with visible light (405 nm) to visually identify microscopic tooth cracks during the diagnosis and treatment of cracked teeth that caused pulp disease. Fluorescence images of the occlusal surface, before and after removal of the restoration, and inside of the access cavity for root canal treatment were obtained using an intraoral capture-type QLF device (Q-ray penC; AIOBIO, Seoul, Korea). The device provided visual information such as enhanced magnification and fluorescent images to identify cracks on the exterior of the tooth, around restorations, and inside the cavity after removal of the restoration by a simple image capture process. The device was able to demonstrate the existence of the crack line and to predict the depth of cracks during treatment.The QLF device showed a potential benefit in the diagnosis and characterization, including the location and depth, of tooth cracks.

Visual or visual-tactile examination to detect and inform the diagnosis of enamel caries

BACKGROUND

The detection and diagnosis of caries at the initial (non-cavitated) and moderate (enamel) levels of severity is fundamental to achieving and maintaining good oral health and prevention of oral diseases. An increasing array of methods of early caries detection have been proposed that could potentially support traditional methods of detection and diagnosis. Earlier identification of disease could afford patients the opportunity of less invasive treatment with less destruction of tooth tissue, reduce the need for treatment with aerosol-generating procedures, and potentially result in a reduced cost of care to the patient and to healthcare services.

OBJECTIVES

To determine the diagnostic accuracy of different visual classification systems for the detection and diagnosis of non-cavitated coronal dental caries for different purposes (detection and diagnosis) and in different populations (children or adults).

SEARCH METHODS

Cochrane Oral Health's Information Specialist undertook a search of the following databases: MEDLINE Ovid (1946 to 30 April 2020); Embase Ovid (1980 to 30 April 2020); US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov, to 30 April 2020); and the World Health Organization International Clinical Trials Registry Platform (to 30 April 2020). We studied reference lists as well as published systematic review articles.

SELECTION CRITERIA

We included diagnostic accuracy study designs that compared a visual classification system (index test) with a reference standard (histology, excavation, radiographs). This included cross-sectional studies that evaluated the diagnostic accuracy of single index tests and studies that directly compared two or more index tests. Studies reporting at both the patient or tooth surface level were included. In vitro and in vivo studies were considered. Studies that explicitly recruited participants with caries into dentine or frank cavitation were excluded. We also excluded studies that artificially created carious lesions and those that used an index test during the excavation of dental caries to ascertain the optimum depth of excavation.

DATA COLLECTION AND ANALYSIS

We extracted data independently and in duplicate using a standardised data extraction and quality assessment form based on QUADAS-2 specific to the review context. Estimates of diagnostic accuracy were determined using the bivariate hierarchical method to produce summary points of sensitivity and specificity with 95% confidence intervals (CIs) and regions, and 95% prediction regions. The comparative accuracy of different classification systems was conducted based on indirect comparisons. Potential sources of heterogeneity were pre-specified and explored visually and more formally through meta-regression.

MAIN RESULTS

We included 71 datasets from 67 studies (48 completed in vitro) reporting a total of 19,590 tooth sites/surfaces. The most frequently reported classification systems were the International Caries Detection and Assessment System (ICDAS) (36 studies) and Ekstrand-Ricketts-Kidd (ERK) (15 studies). In reporting the results, no distinction was made between detection and diagnosis. Only two studies were at low risk of bias across all four domains, and 15 studies were at low concern for applicability across all three domains. The patient selection domain had the highest proportion of high risk of bias studies (49 studies). Four studies were assessed at high risk of bias for the index test domain, nine for the reference standard domain, and seven for the flow and timing domain. Due to the high number of studies on extracted teeth concerns regarding applicability were high for the patient selection and index test domains (49 and 46 studies respectively). Studies were synthesised using a hierarchical bivariate method for meta-analysis. There was substantial variability in the results of the individual studies: sensitivities ranged from 0.16 to 1.00 and specificities from 0 to 1.00. For all visual classification systems the estimated summary sensitivity and specificity point was 0.86 (95% CI 0.80 to 0.90) and 0.77 (95% CI 0.72 to 0.82) respectively, diagnostic odds ratio (DOR) 20.38 (95% CI 14.33 to 28.98). In a cohort of 1000 tooth surfaces with 28% prevalence of enamel caries, this would result in 40 being classified as disease free when enamel caries was truly present (false negatives), and 163 being classified as diseased in the absence of enamel caries (false positives). The addition of test type to the model did not result in any meaningful difference to the sensitivity or specificity estimates (Chi2(4) = 3.78, P = 0.44), nor did the addition of primary or permanent dentition (Chi2(2) = 0.90, P = 0.64). The variability of results could not be explained by tooth surface (occlusal or approximal), prevalence of dentinal caries in the sample, nor reference standard. Only one study intentionally included restored teeth in its sample and no studies reported the inclusion of sealants. We rated the certainty of the evidence as low, and downgraded two levels in total for risk of bias due to limitations in the design and conduct of the included studies, indirectness arising from the in vitro studies, and inconsistency of results.

AUTHORS' CONCLUSIONS

Whilst the confidence intervals for the summary points of the different visual classification systems indicated reasonable performance, they do not reflect the confidence that one can have in the accuracy of assessment using these systems due to the considerable unexplained heterogeneity evident across the studies. The prediction regions in which the sensitivity and specificity of a future study should lie are very broad, an important consideration when interpreting the results of this review. Should treatment be provided as a consequence of a false-positive result then this would be non-invasive, typically the application of fluoride varnish where it was not required, with low potential for an adverse event but healthcare resource and finance costs. Despite the robust methodology applied in this comprehensive review, the results should be interpreted with some caution due to shortcomings in the design and execution of many of the included studies. Studies to determine the diagnostic accuracy of methods to detect and diagnose caries in situ are particularly challenging. Wherever possible future studies should be carried out in a clinical setting, to provide a realistic assessment of performance within the oral cavity with the challenges of plaque, tooth staining, and restorations, and consider methods to minimise bias arising from the use of imperfect reference standards in clinical studies.

Light-based diagnostic methods for the in vivo assessment of initial caries lesions: Laser fluorescence, QLF and OCT

OBJECTIVES

To evaluate different light-based caries diagnostic methods for assessment of non-cavitated initial carious lesions on smooth surfaces.

METHODS

39 participants were included. For each participant, three regions of interest (ROI) with ICDAS codes 0, 1 or 2 were defined. All ROIs (n = 117) were investigated/imaged with laser fluorescence (LF, DIAGNOdent 2095; KaVo dental GmbH), quantitative light-induced fluorescence (QLF; Biluminator 2+, Inspektor Research Systems B.V.) and spectral-domain optical coherence tomography (SD-OCT; Telesto II, Thorlabs GmbH). The values of LF, ΔF of QLF, and the lesion extent assessed by OCT were categorized. Frequency distribution of LF-/QLF- and OCT-scores was determined for each ICDAS code included. Inter- and intra-examiner reproducibility of QLF and OCT measurements were assessed by unweighted kappa coefficient (ĸ) and Wilcoxon test (α = 0.05).

RESULTS

Compared with LF and QLF, OCT showed various manifestations of carious lesions for visually sound ROIs and a larger variation of caries extent in depth within the same ICDAS code groups. Intra-examiner reproducibility ranged between 0.49 and 1.00 for the QLF analysis and between 0.95 and 0.99 for the OCT analysis. Inter-examiner reproducibility ranged between 0.17 and 0.32 for the QLF analysis and between 0.65 and 0.79 for the OCT analysis.

CONCLUSION

LF and QLF were insensitive to less pronounced smooth-surface lesions while OCT allowed differentiation based on the penetration depth of the carious lesions. This makes OCT a suitable method to complement conventional visual inspection in order to detect and assess (very) early lesions.

Imaging modalities to inform the detection and diagnosis of early caries

BACKGROUND

The detection and diagnosis of caries at the earliest opportunity is fundamental to the preservation of tooth tissue and maintenance of oral health. Radiographs have traditionally been used to supplement the conventional visual-tactile clinical examination. Accurate, timely detection and diagnosis of early signs of disease could afford patients the opportunity of less invasive treatment with less destruction of tooth tissue, reduce the need for treatment with aerosol-generating procedures, and potentially result in a reduced cost of care to the patient and to healthcare services.

OBJECTIVES

To determine the diagnostic accuracy of different dental imaging methods to inform the detection and diagnosis of non-cavitated enamel only coronal dental caries.

SEARCH METHODS

Cochrane Oral Health's Information Specialist undertook a search of the following databases: MEDLINE Ovid (1946 to 31 December 2018); Embase Ovid (1980 to 31 December 2018); US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov, to 31 December 2018); and the World Health Organization International Clinical Trials Registry Platform (to 31 December 2018). We studied reference lists as well as published systematic review articles.

SELECTION CRITERIA

We included diagnostic accuracy study designs that compared a dental imaging method with a reference standard (histology, excavation, enhanced visual examination), studies that evaluated the diagnostic accuracy of single index tests, and studies that directly compared two or more index tests. Studies reporting at both the patient or tooth surface level were included. In vitro and in vivo studies were eligible for inclusion. Studies that explicitly recruited participants with more advanced lesions that were obviously into dentine or frankly cavitated were excluded. We also excluded studies that artificially created carious lesions and those that used an index test during the excavation of dental caries to ascertain the optimum depth of excavation.

DATA COLLECTION AND ANALYSIS

Two review authors extracted data independently and in duplicate using a standardised data extraction form and quality assessment based on QUADAS-2 specific to the clinical context. Estimates of diagnostic accuracy were determined using the bivariate hierarchical method to produce summary points of sensitivity and specificity with 95% confidence regions. Comparative accuracy of different radiograph methods was conducted based on indirect and direct comparisons between methods. Potential sources of heterogeneity were pre-specified and explored visually and more formally through meta-regression.

MAIN RESULTS

We included 104 datasets from 77 studies reporting a total of 15,518 tooth sites or surfaces. The most frequently reported imaging methods were analogue radiographs (55 datasets from 51 studies) and digital radiographs (42 datasets from 40 studies) followed by cone beam computed tomography (CBCT) (7 datasets from 7 studies). Only 17 studies were of an in vivo study design, carried out in a clinical setting. No studies were considered to be at low risk of bias across all four domains but 16 studies were judged to have low concern for applicability across all domains. The patient selection domain had the largest number of studies judged to be at high risk of bias (43 studies); the index test, reference standard, and flow and timing domains were judged to be at high risk of bias in 30, 12, and 7 studies respectively. Studies were synthesised using a hierarchical bivariate method for meta-analysis. There was substantial variability in the results of the individual studies, with sensitivities that ranged from 0 to 0.96 and specificities from 0 to 1.00. For all imaging methods the estimated summary sensitivity and specificity point was 0.47 (95% confidence interval (CI) 0.40 to 0.53) and 0.88 (95% CI 0.84 to 0.92), respectively. In a cohort of 1000 tooth surfaces with a prevalence of enamel caries of 63%, this would result in 337 tooth surfaces being classified as disease free when enamel caries was truly present (false negatives), and 43 tooth surfaces being classified as diseased in the absence of enamel caries (false positives). Meta-regression indicated that measures of accuracy differed according to the imaging method (Chi2(4) = 32.44, P < 0.001), with the highest sensitivity observed for CBCT, and the highest specificity observed for analogue radiographs. None of the specified potential sources of heterogeneity were able to explain the variability in results. No studies included restored teeth in their sample or reported the inclusion of sealants. We rated the certainty of the evidence as low for sensitivity and specificity and downgraded two levels in total for risk of bias due to limitations in the design and conduct of the included studies, indirectness arising from the in vitro studies, and the observed inconsistency of the results.

AUTHORS' CONCLUSIONS

The design and conduct of studies to determine the diagnostic accuracy of methods to detect and diagnose caries in situ are particularly challenging. Low-certainty evidence suggests that imaging for the detection or diagnosis of early caries may have poor sensitivity but acceptable specificity, resulting in a relatively high number of false-negative results with the potential for early disease to progress. If left untreated, the opportunity to provide professional or self-care practices to arrest or reverse early caries lesions will be missed. The specificity of lesion detection is however relatively high, and one could argue that initiation of non-invasive management (such as the use of topical fluoride), is probably of low risk. CBCT showed superior sensitivity to analogue or digital radiographs but has very limited applicability to the general dental practitioner. However, given the high-radiation dose, and potential for caries-like artefacts from existing restorations, its use cannot be justified in routine caries detection. Nonetheless, if early incidental carious lesions are detected in CBCT scans taken for other purposes, these should be reported. CBCT has the potential to be used as a reference standard in diagnostic studies of this type. Despite the robust methodology applied in this comprehensive review, the results should be interpreted with some caution due to shortcomings in the design and execution of many of the included studies. Future research should evaluate the comparative accuracy of different methods, be undertaken in a clinical setting, and focus on minimising bias arising from the use of imperfect reference standards in clinical studies.

Fluorescence devices for the detection of dental caries

BACKGROUND

Caries is one of the most prevalent and preventable conditions worldwide. If identified early enough then non-invasive techniques can be applied, and therefore this review focusses on early caries involving the enamel surface of the tooth. The cornerstone of caries detection is a visual and tactile dental examination, however alternative methods of detection are available, and these include fluorescence-based devices. There are three categories of fluorescence-based device each primarily defined by the different wavelengths they exploit; we have labelled these groups as red, blue, and green fluorescence. These devices could support the visual examination for the detection and diagnosis of caries at an early stage of decay.

OBJECTIVES

Our primary objectives were to estimate the diagnostic test accuracy of fluorescence-based devices for the detection and diagnosis of enamel caries in children or adults. We planned to investigate the following potential sources of heterogeneity: tooth surface (occlusal, proximal, smooth surface or adjacent to a restoration); single point measurement devices versus imaging or surface assessment devices; and the prevalence of more severe disease in each study sample, at the level of caries into dentine.

SEARCH METHODS

Cochrane Oral Health's Information Specialist undertook a search of the following databases: MEDLINE Ovid (1946 to 30 May 2019); Embase Ovid (1980 to 30 May 2019); US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov, to 30 May 2019); and the World Health Organization International Clinical Trials Registry Platform (to 30 May 2019). We studied reference lists as well as published systematic review articles.

SELECTION CRITERIA

We included diagnostic accuracy study designs that compared a fluorescence-based device with a reference standard. This included prospective studies that evaluated the diagnostic accuracy of single index tests and studies that directly compared two or more index tests. Studies that explicitly recruited participants with caries into dentine or frank cavitation were excluded.

DATA COLLECTION AND ANALYSIS

Two review authors extracted data independently using a piloted study data extraction form based on the Quality Assessment of Diagnostic Accuracy Studies 2 (QUADAS-2). Sensitivity and specificity with 95% confidence intervals (CIs) were reported for each study. This information has been displayed as coupled forest plots and summary receiver operating characteristic (SROC) plots, displaying the sensitivity-specificity points for each study. We estimated diagnostic accuracy using hierarchical summary receiver operating characteristic (HSROC) methods. We reported sensitivities at fixed values of specificity (median 0.78, upper quartile 0.90).

MAIN RESULTS

We included a total of 133 studies, 55 did not report data in the 2 x 2 format and could not be included in the meta-analysis. 79 studies which provided 114 datasets and evaluated 21,283 tooth surfaces were included in the meta-analysis. There was a high risk of bias for the participant selection domain. The index test, reference standard, and flow and timing domains all showed a high proportion of studies to be at low risk of bias. Concerns regarding the applicability of the evidence were high or unclear for all domains, the highest proportion being seen in participant selection. Selective participant recruitment, poorly defined diagnostic thresholds, and in vitro studies being non-generalisable to the clinical scenario of a routine dental examination were the main reasons for these findings. The dominance of in vitro studies also means that the information on how the results of these devices are used to support diagnosis, as opposed to pure detection, was extremely limited. There was substantial variability in the results which could not be explained by the different devices or dentition or other sources of heterogeneity that we investigated. The diagnostic odds ratio (DOR) was 14.12 (95% CI 11.17 to 17.84). The estimated sensitivity, at a fixed median specificity of 0.78, was 0.70 (95% CI 0.64 to 0.75). In a hypothetical cohort of 1000 tooth sites or surfaces, with a prevalence of enamel caries of 57%, obtained from the included studies, the estimated sensitivity of 0.70 and specificity of 0.78 would result in 171 missed tooth sites or surfaces with enamel caries (false negatives) and 95 incorrectly classed as having early caries (false positives). We used meta-regression to compare the accuracy of the different devices for red fluorescence (84 datasets, 14,514 tooth sites), blue fluorescence (21 datasets, 3429 tooth sites), and green fluorescence (9 datasets, 3340 tooth sites) devices. Initially, we allowed threshold, shape, and accuracy to vary according to device type by including covariates in the model. Allowing consistency of shape, removal of the covariates for accuracy had only a negligible effect (Chi2 = 3.91, degrees of freedom (df) = 2, P = 0.14). Despite the relatively large volume of evidence we rated the certainty of the evidence as low, downgraded two levels in total, for risk of bias due to limitations in the design and conduct of the included studies, indirectness arising from the high number of in vitro studies, and inconsistency due to the substantial variability of results.

AUTHORS' CONCLUSIONS

There is considerable variation in the performance of these fluorescence-based devices that could not be explained by the different wavelengths of the devices assessed, participant, or study characteristics. Blue and green fluorescence-based devices appeared to outperform red fluorescence-based devices but this difference was not supported by the results of a formal statistical comparison. The evidence base was considerable, but we were only able to include 79 studies out of 133 in the meta-analysis as estimates of sensitivity or specificity values or both could not be extracted or derived. In terms of applicability, any future studies should be carried out in a clinical setting, where difficulties of caries assessment within the oral cavity include plaque, staining, and restorations. Other considerations include the potential of fluorescence devices to be used in combination with other technologies and comparative diagnostic accuracy studies.

Presenting patients with information on their oral health risk: the PREFER three-arm RCT and ethnography

Background

A new NHS dental practice contract is being tested using a traffic light (TL) system that categorises patients as being at red (high), amber (medium) or green (low) risk of poor oral health. This is intended to increase the emphasis on preventative dentistry, including giving advice on ways patients can improve their oral health. Quantitative Light-Induced Fluorescence (QLF™) cameras (Inspektor Research Systems BV, Amsterdam, the Netherlands) also potentially offer a vivid portrayal of information on patients’ oral health.

Methods

Systematic review – objective: to investigate how patients value and respond to different forms of information on health risks. Methods: electronic searches of nine databases, hand-searching of eight specialist journals and backwards and forwards citation-chasing followed by duplicate title, abstract- and paper-screening and data-extraction. Inclusion criteria limited studies to personalised information on risk given to patients as part of their health care. Randomised controlled trial (RCT) – setting: NHS dental practice. Objective: to investigate patients’ preferences for and response to different forms of information about risk given at check-ups. Design: a pragmatic, multicentred, three-arm, parallel-group, patient RCT. Participants: adults with a high/medium risk of poor oral health attending NHS dental practices. Interventions: (1) information given verbally supported by a card showing the patient’s TL risk category; (2) information given verbally supported by a QLF photograph of the patient’s mouth. The control was verbal information only (usual care). Main outcome measures: primary outcome – median valuation for the three forms of information measured by willingness to pay (WTP). Secondary outcomes included toothbrushing frequency and duration, dietary sugar intake, smoking status, self-rated oral health, a basic periodontal examination, Plaque Percentage Index and the number of tooth surfaces affected by caries (as measured by QLF). Qualitative study – an ethnography involving observations of 368 dental appointments and interviews with patients and dental teams.

Results

Systematic review – the review identified 12 papers (nine of which were RCTs). Eight studies involved the use of computerised risk assessments in primary care. Intervention effects were generally modest, even with respect to modifying risk perceptions rather than altering behaviour or clinical outcomes. RCT – the trial found that 51% of patients identified verbal information as their most preferred form, 35% identified QLF as most preferred and 14% identified TL information as most preferred. The median WTP for TL was about half that for verbal information alone. Although at 6 and 12 months patients reported taking less sugar in drinks, and at 12 months patients reported longer toothbrushing, there was no difference by information group. Qualitative study – there was very little explicit risk talk. Lifestyle discussions were often cursory to avoid causing shame or embarrassment to patients.

Limitations

Only 45% of patients were retained in the trial at 6 months and 31% were retained at 12 months. The trial was conducted in four dental practices, and five dental practices were involved in the qualitative work.

Conclusions

Patients prefer personal, detailed verbal advice on oral health at their check-up. A new NHS dental practice contract using TL categorisation might make this less likely.

Future work

Research on how to deliver, within time constraints, effective advice to patients on preventing poor oral health. More research on ‘risk work’ in wider clinical settings is also needed.

Trial registration

Current Controlled Trials ISRCTN71242343.

Funding

This project was funded by the National Institute for Health Research (NIHR) Health Services and Delivery Research programme and will be published in full in Health Services and Delivery Research; Vol. 8, No. 3. See the NIHR Journals Library website for further project information.

Demineralization detection in orthodontics using an ophthalmic optical coherence tomography device equipped with a multicolor fluorescence module

OBJECTIVES

Demineralizations such as white spot lesions are among the most prevalent side effects during orthodontic treatment. Fluorescence devices, including quantitative light-induced fluorescence (QLF), exploiting the intrinsic fluorescence of enamel and teeth and most recently optical coherence tomography (OCT) were introduced for early demineralization detection. In addition to near-infrared OCT scanning, multicolor modules allow for imaging with different laser wavelengths and the detection of reflective- and fluorescent light. The aim of this study was to evaluate a modified multicolor ophthalmic OCT device for the detection of early carious lesions in vitro and in vivo.

MATERIALS AND METHODS

Twenty-seven extracted lesion free human teeth were randomly assigned to three different demineralization protocols. Carious lesion detection was performed using macrophotography, OCT, and reflectance/fluorescence imaging using green laser and blue laser light. In addition, teeth of 5 orthodontic patients were OCT scanned, and fluorescence imaging using blue laser light was performed to assess demineralization after orthodontic therapy.

RESULTS

Both in vitro and in vivo, OCT allowed for precise determination of lesion depth and enamel loss. Fluorescence imaging using blue laser light was most sensitive for the detection of early demineralization in vitro and in vivo. However, established and severe demineralizations were also reliably detected by macrophotography in vitro and in vivo.

CONCLUSION

Demineralization can be detected with high sensitivity using blue fluorescence imaging with multicolor OCT devices.

CLINICAL RELEVANCE

In the future, OCT fluorescence imaging might be considered for longitudinal monitoring of dental hard tissue during orthodontic treatment in clinical trials.

Photoinhibition of Streptococcus mutans Biofilm-Induced Lesions in Human Dentin by Violet-Blue Light

This in vitro study determined the effectiveness of violet-blue light on Streptococcus mutans (UA159) biofilm induced dentinal lesions. Biofilm was formed on human dentin specimens in a 96-well microtiter plate and incubated for 13 h in the presence of tryptic soy broth (TSB) or TSB supplemented with 1% sucrose (TSBS). Violet-blue light (405 nm) from quantitative light-induced fluorescence (QLF^TM) was used to irradiate the biofilm. Supernatant liquid was removed, and the biofilm was irradiated continuously with QLF for 5 min twice daily with an interval of 6 h for 5 d, except with one treatment on the final day. Colony forming units (CFU) of the treated biofilm, changes in fluorescence (∆F; QLF-Digital Biluminator^TM), lesion depth (L), and integrated mineral loss (∆Z; both transverse microradiography) were quantified at the end of the fifth day. Statistical analysis used analysis of variance (ANOVA), testing at a 5% significance level. In the violet-blue light irradiated groups, there was a significant reduction (p < 0.05) of bacterial viability (CFU) of S. mutans with TSB and TSBS. Violet-blue light irradiation resulted in the reduction of ∆F and L of the dentinal surface with TSBS. These results indicate that violet-blue light has the capacity to reduce S. mutans cell numbers.

Detection ability and direction effect of photothermal-radiometry and modulated-luminescence for non-cavitated approximal caries

OBJECTIVE

The objective was to evaluate the ability of photothermal-radiometry and modulated-luminescence (PTR/LUM) to detect non-cavitated approximal caries lesions, including the effect of scanning direction.

METHODS

Thirty human extracted premolars were selected based on micro-computed tomography [μ-CT: μ-CT = 0: sound (n = 12), μ-CT = 1: lesions into outer-half of enamel (n = 6), μ-CT = 2: lesions into inner-half of enamel (n = 6), and μ-CT = 3: lesions into outer one-third of dentine (n = 6)]. Teeth were mounted in a custom-made device to simulate approximal contact. Each tooth was scanned from three directions: buccal, lingual, and occlusal, then repeated 48 h later. Statistical analyses were performed by bootstrap analyses using average and maximum values across all directions. Sensitivity, specificity, area under ROC-curve (AUC), intraclass correlation coefficient (ICC) and correlation with μ-CT were calculated. Sensitivity was further evaluated based on lesion extension.

RESULTS

Using the manufacturer-suggested lesion cut-off, overall sensitivity ranged from 3%-61%, where the maximum value of all measurements (All-max) showed higher sensitivity (61 %) than other measurements except the buccal direction, which was also higher than the lingual and occlusal directions. As μ-CT score increased from μ-CT = 1-3, the sensitivity of All-max also increased from 50 % to 74 %. Specificity was 100 % regardless of direction, and AUC ranged from 0.65 to 0.88. All-max had the highest ICC (0.74). PTR/LUM values showed weak to moderate correlations with μ-CT.

CONCLUSION

Within the limitations of this in vitro study, PTR/LUM non-cavitated approximal caries lesion detection achieved best individual results from the buccal direction, while using the maximum value from all directions might improve performance.

CLINICAL SIGNIFICANCE

Non-cavitated approximal caries detection is a challenging procedure. PTR/LUM is a nondestructive, no ionized-radiation caries detection method that can scan from buccal, lingual, and occlusal directions of an approximal surface. PTR/LUM seems suitable to detect deeper non-cavitated approximal caries. The maximum PTR/LUM value from three directions may be optimal.

The effects of 8DSS peptide on remineralization in a rat model of enamel caries evaluated by two nondestructive techniques

Nowadays, dental caries is one of the most common oral health problems, affecting most individuals. It has been found that, by remineralizing enamel at an early stage in the formation of enamel caries, teeth can be effectively protected from dental caries. In this work, a peptide with eight repetitive sequences of aspartate-serine-serine (8DSS) is applied as the bio-mineralizer in an in-vivo rat enamel caries model. Nondestructive quantitative light-induced fluorescence-digital (QLF-D) imaging and micro-computed tomography (micro-CT) are used to evaluate the remineralization of enamel carious lesions by measuring the total fluorescence radiance loss of the molar area (Δ Q_Total), acquired using QLF-D imaging, and the mineral density and residual molar enamel volume, acquired using micro-CT. Correlations are explored between Δ Q_Total and mineral density (strong correlation, r = 0.8000, p < 0.001) and Δ Q_Total and residual molar enamel volume (moderate correlation, r = 0.6375, p < 0.001). Our results demonstrate that 8DSS is a promising in-vivo remineralization agent that exhibits comparable effects to NaF ( p < 0.05), which has been verified using the classical Keyes method. Moreover, the nondestructive QLF-D and micro-CT methods can be combined to quantify the remineralization of enamel carious lesions three-dimensionally in vivo, making them broadly applicable in quantifying hard tissues.

Assessment of the Raman spectroscopy effectiveness in determining the early changes in human enamel caused by artificial caries

Raman maps indicate the changes in enamel affected by the early demineralization process with the use of new parameters.

Comparison of diagnostic effects of infrared imaging and bitewing radiography in proximal caries of permanent teeth

This study aimed to compare the diagnostic efficacy of VistaCam iX intraoral camera system using infrared light and bitewing radiography for detection of proximal caries in permanent teeth. This in vitro study was performed on 108 teeth. The proximal surfaces of the teeth were examined for caries using ICDAS II criteria, bitewing radiography, and the Proxi head of VistaCam iX. The teeth were then sectioned and histologically analyzed (gold standard). Data were analyzed using SPSS version 25 via the correlation test at P < 0.05 level of significance. The overall and segmental sensitivity and specificity values were calculated for (1) the contact area and higher regions, (2) below the contact area to the cementoenamel junction (CEJ), and (3) below the CEJ. Radiography had the highest specificity. VistaCam had the highest overall and segmental sensitivity for enamel caries. Radiography had the highest segmental sensitivity for dentin. In region 1, VistaCam had the highest sensitivity and lowest specificity, and radiography and ICDAS II had the highest specificity and lowest sensitivity. In region 2, radiography showed the highest sensitivity and specificity. VistaCam had the lowest sensitivity and ICDAS II had the lowest specificity in this region. In region 3, VistaCam did not detect any caries and radiography had a better performance than ICDAS II. The specificity value was equal for both methods. VistaCam had the highest diagnostic efficacy among the three methods for caries in region 1; however, bitewing radiography had a superior efficacy in regions 2 and 3.

The International Caries Detection and Assessment System – ICDAS: A Systematic Review

The aims of this study were: (1) to evaluate the overall reproducibility and accuracy of the International Caries Detection and Assessment System (ICDAS) for assessing coronal caries lesions, and (2) to investigate the use of systems associated with the ICDAS for activity assessment of coronal caries lesions. Specific search strategies were adopted to identify studies published up to 2016. For the first objective, we selected studies that assessed primary coronal caries lesions using the ICDAS as a reference standard. A total of 54 studies were included. Meta-analyses summarized the results concerning reproducibility and accuracy (correlation with histology, summary ROC curves [SROC], and diagnostic odds ratio [DOR]). The latter 2 were expressed at D1/D3 levels. The heterogeneity of the studies was also assessed. Reproducibility values (pooled) were > 0.65. The ICDAS mostly presented a good overall performance as most areas under SROC were > 0.75 at D1 and > 0.90 at D3; DOR ≥6. For the second objective, we selected studies investigating activity assessment associated with the ICDAS. The meta-analyses pooled results based on the same methodology and parameters as above. Longitudinal findings regarding caries progression were described to estimate the validity of these systems. On average, the systems for activity assessment of caries lesions showed moderate values concerning reproducibility and overall performance. Active caries lesions were more prone to progress than inactive ones after 2 years. In conclusion, the ICDAS presented a substantial level of reproducibility and accuracy for assessing primary coronal caries lesions. Additional systems associated with the ICDAS that classify caries lesion activity can be useful as they are moderately reproducible and accurate.

Detection of proximal caries using quantitative light-induced fluorescence-digital and laser fluorescence: a comparative study

PURPOSE

The purpose of this study was to evaluate the in vitro validity of quantitative light-induced fluorescence-digital (QLF-D) and laser fluorescence (DIAGNOdent) for assessing proximal caries in extracted premolars, using digital radiography as reference method.

MATERIALS AND METHODS

A total of 102 extracted premolars with similar lengths and shapes were used. A single operator conducted all the examinations using three different detection methods (bitewing radiography, QLF-D, and DIAGNOdent). The bitewing x-ray scale, QLF-D fluorescence loss (ΔF), and DIAGNOdent peak readings were compared and statistically analyzed.

RESULTS

Each method showed an excellent reliability. The correlation coefficient between bitewing radiography and QLF-D, DIAGNOdent were -0.644 and 0.448, respectively, while the value between QLF-D and DIAGNOdent was -0.382. The kappa statistics for bitewing radiography and QLF-D had a higher diagnosis consensus than those for bitewing radiography and DIAGNOdent. The QLF-D was moderately to highly accurate (AUC = 0.753 - 0.908), while DIAGNOdent was moderately to less accurate (AUC = 0.622 - 0.784). All detection methods showed statistically significant correlation and high correlation between the bitewing radiography and QLF-D.

CONCLUSION

QLF-D was found to be a valid and reliable alternative diagnostic method to digital bitewing radiography for in vitro detection of proximal caries.

Antibacterial photodynamic therapy with curcumin and Curcuma xanthorrhiza extract against Streptococcus mutans

BACKGROUND

Bacteria are becoming increasingly resistant to conventional antibacterial chemotherapy. This has prompted the application of antibacterial photodynamic therapy (aPDT) in bacteria-related diseases due to its excellent biocide effects. However, few studies have attempted to develop a novel photosensitizer based on natural components. The aim of the present study was to compare the aPDT effects of curcumin and Curcuma xanthorrhiza extract (CXE) against Streptococcus mutans.

METHODS

A planktonic suspension containing an S. mutans strain was treated in three separate groups: aPDT with curcumin, CXE, and a mixture of curcumin and CXE (ratio= 1:1) at concentrations of 0, 10, 10², 10³, and 10⁴ng/ml. Light irradiation with a center wavelength of 405nm was applied using an LED (power density of 84.5mW for 300s at an energy density of 25.3J/cm²). The phototoxicity of photosensitizers against S. mutans was investigated using a colony-forming-unit assay. Percentage logarithmic reductions [log₁₀(CFU/ml) values] were analyzed using one-way ANOVA followed by the Tukey test (p<0.05) and Student's independent t-test.

RESULTS

The viability of S. mutans in the presence of curcumin, CXE, and a mixture of these two components was substantially reduced during irradiation with 405nm light. The phototoxicity of the photosensitizer varied with its solubility and concentration.

CONCLUSION

These preliminary in vitro findings imply that combining curcumin and CXE with a 405nm LED may be a novel method of applying aPDT. This could be advantageous in preventing and treating dental caries using devices that are readily available in clinics.

Effect of non-fluoride agents on the prevention of dental caries in primary dentition: A systematic review

Objective

To assess the effect of non-fluoride agents on the prevention of dental caries in primary dentition.

Materials and methods

Medline, Web of Science, Embase, Cochrane Library, CBM and CNKI databases were searched to identify all the relevant articles published prior to 16 December 2016. Grey literature was also searched. Randomized controlled human clinical trials in which non-fluoride agents were delivered by any method were considered.

Results

Of the 1,236 studies screened, 39 full articles were scrutinized and 14 selected for inclusion in the final sample. Five chemical agents, namely arginine, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), chlorhexidine, triclosan and xylitol were investigated in these included studies. The cariostatic effects of non-fluoride agents in vivo were evaluated in comparison with fluoride or placebos in randomized controlled trials. There is evidence that the use of certain doses of xylitol may be effective in arresting dental caries in primary dentition. However, quantitative synthesis could not be carried out because of the clinical and methodological heterogeneity of the included studies.

Conclusions

A study at low risk of bias indicated that daily use of xylitol wipes is a useful adjunct for caries control in young children, however, this conclusion should be interpreted with caution as this study had a very limited sample size. Chlorhexidine and CPP-ACP may be more effective than a placebo in managing caries in primary dentition, but their effectiveness is borderline when compared with fluoride. Arginine-containing mint confection and 0.3% triclosan varnish were found to reduce caries development in primary teeth but the evidence was at high risk of bias. High quality randomized controlled trials are needed in order to make a conclusive recommendation.

Measuring the Remineralization Potential of Different Agents with Quantitative Light-Induced Fluorescence Digital Biluminator

Background

The aim of this study was to investigate the effectiveness of different remineralization agents by quantitative light-induced fluorescence digital Biluminator™ (QLF-D).

Methods

Artificial caries lesions were created, and the teeth were divided according to the tested materials: (i) distilled water, (ii) acidulated phosphate fluoride (APF), (iii) Curodont Repair (CR), (iv) ammonium hexafluorosilicate (SiF) and (v) ammonium hexafluorosilicate plus cetylpyridinium chloride (SiF + CPC). After treatment procedures, each of the samples was placed in artificial saliva. After demineralization and 1 and 4 weeks of remineralization procedures, fluorescence loss and lesion areas were measured with QLF-D. Data were statistically analyzed (α = 0.05).

Results

The fluorescence values of the demineralized enamel specimens treated with the various agents differed significantly compared with pretreatment values for both 1 and 4 weeks (p<0.05). At 4 weeks, the highest fluorescence gain was calculated in the CR, APF and SiF groups compared with the control (p<0.05).

Conclusions

APF, SiF and CR groups yielded greater remineralization ability than SiF + CPC and control groups.

Evaluation of the remineralization capacity of CPP-ACP containing fluoride varnish by different quantitative methods

Objective

The aim of this study was to evaluate the efficacy of CPP-ACP containing fluoride varnish for remineralizing white spot lesions (WSLs) with four different quantitative methods.

Material and Methods

Four windows (3x3 mm) were created on the enamel surfaces of bovine incisor teeth. A control window was covered with nail varnish, and WSLs were created on the other windows (after demineralization, first week and fourth week) in acidified gel system. The test material (MI Varnish) was applied on the demineralized areas, and the treated enamel samples were stored in artificial saliva. At the fourth week, the enamel surfaces were tested by surface microhardness (SMH), quantitative light-induced fluorescence-digital (QLF-D), energy-dispersive spectroscopy (EDS) and laser fluorescence (LF pen). The data were statistically analyzed (α=0.05).

Results

While the LF pen measurements showed significant differences at baseline, after demineralization, and after the one-week remineralization period (p<0.05), the difference between the 1- and 4-week was not significant (p>0.05). With regards to the SMH and QLF-D analyses, statistically significant differences were found among all the phases (p<0.05). After the 1- and 4-week treatment periods, the calcium (Ca) and phosphate (P) concentrations and Ca/P ratio were higher compared to those of the demineralization surfaces (p<0.05).

Conclusion

CPP-ACP containing fluoride varnish provides remineralization of WSLs after a single application and seems suitable for clinical use.

Evaluation of enamel demineralization in adolescents after rapid maxillary expansion using the quantitative light-induced fluorescence method: A single-center, randomized controlled clinical trial

INTRODUCTION

The aim of this 2-arm parallel trial was to evaluate enamel demineralization after rapid maxillary expansion (RME) compared with an untreated control group using quantitative light-induced fluorescence.

METHODS

Thirty-six patients who needed RME as part of their orthodontic treatment were separated randomly into either the control group or the intervention group (RME). Eligibility criteria included crossbite, no previous orthodontic treatment, no systemic disease, and all permanent teeth erupted except second and third molars. The main outcome was quantitative evaluation of demineralization, and assessment of the vulnerability of each tooth to demineralization was the secondary outcome. Randomization was made at the start of the study with preprepared random number tables. Blinding was applicable for outcome assessment only. Patients in the RME group underwent expansion with a bonded acrylic expander; patients in the control group were untreated. Records were taken using quantitative light-induced fluorescence Digital Biluminator (Inspektor Research Systems, Amsterdam, The Netherlands) in pretreatment and posttreatment observation phases. The presence and extent of lesions on the buccal surfaces of all teeth, except the second and third molars, were assessed. The fluorescence loss, lesion area, and percentage of fluorescence loss were determined using the system's software. The numbers of teeth with more than a 5% change in fluorescence loss, were calculated. Data were analyzed with Wilcoxon signed rank, Mann-Whitney U, multivariate analysis of variance, and chi-square tests (P <0.05). Risk and odds ratios were calculated.

RESULTS

A total of 36 patients were randomized to either the RME or the control group in a 1:1 ratio. This study was completed with 18 patients in the RME group (8 girls, 10 boys; mean age, 14.2 ± 1.0 years) and 18 patients in the control group (10 girls, 8 boys; mean age: 14.1 ± 0.8 years). All patients completed the study, and none were lost to follow-up. The area of demineralization decreased in the RME group (-17.50 mm²), which was a significantly greater decrease than in the control group (0.00) (effect size, -2.63; mean difference, -87.94; 95% confidence interval, -223.75-47.86; P = 0.008). No statistically significant difference was found for fluorescence loss. The numbers of teeth with demineralization and remineralization were higher in the treatment group. According to the risk ratio, the difference between groups regarding demineralization was not significant. No harm was found except gingivitis associated with the bonded appliance.

CONCLUSIONS

RME therapy using a bonded expander does not increase enamel demineralization.

REGISTRATION

This trial was not registered.

PROTOCOL

The protocol was not published before trial commencement.

Evaluation of resin infiltration using quantitative light-induced fluorescence technology

OBJECTIVES

To determine whether quantitative light-induced fluorescence (QLF) technology can be used to classify the colour of teeth specimens before and after resin infiltration (RI) treatment, and calculate the correlation between the ΔF value and colour difference (ΔE) in fluorescence images of the specimens obtained using a QLF-digital (QLF-D) device.

METHODS

Sixty sound bovine permanent teeth specimens were immersed in demineralized solution. Two exposed windows were formed in each specimen, and RI treatment was applied to one of them. The ΔE values were obtained for the differences between a sound tooth surface (SS), an early dental caries surface (ECS) and an ECS treated with RI (RS) in white-light and fluorescence images obtained using QLF-D, respectively. The ΔF value was obtained from fluorescence images using dedicated software for QLF-D. The mean differences between the ΔE values obtained from the white-light and fluorescence images were analyzed by paired t-test. Pearson correlation analysis and Bland-Altman plots were applied to the differences between the ΔF value for ECS (ΔFSS-ECS) and the ΔE value between SS and ECS (ΔESS-ECS), and between the ΔF value for RS (ΔFSS-RS) and the ΔE value between SS and RS (ΔESS-RS) in fluorescence images.

RESULTS

The ΔE values obtained from fluorescence images were three times higher than the ΔE values obtained from white-light images (p<0.001). Significant correlations were confirmed between ΔESS-ECS and ΔFSS-ECS (r=-0.492, p<0.001) and between ΔESS-RS and ΔFSS-RS (r=-0.661, p<0.001).

CONCLUSION

QLF technology can be used to confirm the presence of RI in teeth.

Detection and Analysis of Enamel Cracks by Quantitative Light-induced Fluorescence Technology

INTRODUCTION

The ability to accurately detect tooth cracks and quantify their depth would allow the prediction of crack progression and treatment success. The aim of this in vitro study was to determine the capabilities of quantitative light-induced fluorescence (QLF) technology in the detection of enamel cracks.

METHODS

Ninety-six extracted human teeth were selected for examining naturally existing or suspected cracked teeth surfaces using a photocuring unit. QLF performed with a digital camera (QLF-D) images were used to assess the ability to detect enamel cracks based on the maximum fluorescence loss value (ΔFmax, %), which was then analyzed using the QLF-D software. A histologic evaluation was then performed in which the samples were sectioned and observed with the aid of a polarized light microscope. The relationship between ΔFmax and the histology findings was assessed based on the Spearman rank correlation. The sensitivity and specificity were calculated to evaluate the validity of using QLF-D to analyze enamel inner-half cracks and cracks extending to the dentin-enamel junction.

RESULTS

There was a strong correlation between the results of histologic evaluations of enamel cracks and the ΔFmax value, with a correlation coefficient of 0.84. The diagnostic accuracy of QLF-D had a sensitivity of 0.87 and a specificity of 0.98 for enamel inner-half cracks and a sensitivity of 0.90 and a specificity of 1.0 for cracks extending to the dentin-enamel junction.

CONCLUSIONS

These results indicate that QLF technology would be a useful clinical tool for diagnosing enamel cracks, especially given that this is a nondestructive method.