Electrochemical sensor based on multi-walled carbon nanotubes and chitosan-nickel complex for sensitive determination of metronidazole

A robust and simple non-enzymatic electrochemical sensor based on carbon dots-metal oxide composite for the detection of metronidazole traces in food products

A facile and simple electrochemical composite sensor, CDs-Ag@Cu2O-GA, prepared from carbon dots stabilized silver nanoparticles and copper oxide, was used as an electrocatalyst and signal amplifier for the non-enzymatic detection of antibiotic traces in food products. The prepared composite demonstrated excellent stability, sensitivity, and cost-effectiveness. The sensor was constructed by modifying a glassy carbon electrode (GCE) with CDs-Ag@Cu2O-GA, and the electroanalytical response was determined for the precise determination of metronidazole (MTZ) drug traces in milk. The analytical response signified fast electron transfer and accessibility of several electroactive sites, producing an amplified response for the reduction of MTZ. The quantitative analysis by the sensor revealed a good linear range (10-110 μM), a low limit of detection (7.1 × 10-7 molL-1), and a high sensitivity (1.5 μA μM-1 cm-2). Furthermore, the sensor displayed excellent potential for practical applications, verified by the good recovery of the drug from spiked milk samples.

A novel electrochemical sensor for the detection of metronidazole residues in food samples

The widespread use and misuse of antibiotics in pharmaceuticals and animal farming has resulted in their accumulation in food sources and the environment, posing significant threats to human health, the environment, and the global economy. In this study, we have developed a hypersensitive, and ultra-selective electrochemical sensor, the first of its kind, by integrating a thermally annealed gold-silver alloy nanoporous matrix (TA-Au-Ag-ANpM) with reduced graphene oxide (r-GO) and poly(glycine) at the surface of a glassy carbon electrode (GCE). This sensor aims to detect life-threatening metronidazole (MTZ) residues in food samples. TA-Au-Ag-ANpM/r-GO/poly(glycine)/GCE was thoroughly characterized using a range of analytical techniques, including UV-Vis, FT-IR, XRD, SEM, and EDX. Furthermore, its electrochemical properties were investigated by cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS). The sensor exhibited outstanding performance, with a broad linear range of 2.0 pM-410 μM. The limits of detection (LOD) and quantification (LOQ) were determined to be 0.0312 pM and 0.104 pM, respectively. The TA-Au-Ag-ANpM/r-GO/poly(glycine)/GCE exhibited exceptional reproducibility, repeatability, stability, and resistance to interferences. Moreover, the sensor demonstrated outstanding performance in detecting MTZ residues in milk powder, pork, and chicken meat samples, achieving very good recoveries (96.9%-101.4%) with a relative standard deviation (RSD) below 5%. This performance highlights the potential for practical applications in food safety and quality monitoring. Therefore, the developed sensor contributes to the advancement of electrochemical sensing technology and its application in ensuring food safety and integrity by combating antibiotic residues.

Different methods for resolving overlapping UV spectra of combination medicinal dose forms of ciprofloxacin and metronidazole

Four simple, specific, easy, precise and accurate spectrophotometric methods were developed for the first time to examine ciprofloxacin and metronidazole in combination, without having been separated beforehand by the developed methods. Ciprofloxacin and metronidazole were determined by utilizing advanced absorbance subtraction (AAS), spectrum subtraction, bivariate and ratio difference methods. Precision, repeatability, robustness, and accuracy were all determined to be within acceptable levels after each of these procedures underwent validation in accordance with ICH recommendations. Each method's benefits and drawbacks are illustrated, and the proposed and reported methodologies were statistically compared.

Chitosan-Based Electrochemical Sensors for Pharmaceuticals and Clinical Applications

Chitosan (CTS), a biocompatible and multifunctional material derived from chitin, has caught researchers' attention in electrochemical detection due to its unique properties. This review paper provides a comprehensive overview of the recent progress and applications of CTS-based electrochemical sensors in the analysis of pharmaceutical products and other types of samples, with a particular focus on the detection of medicinal substances. The review covers studies and developments from 2003 to 2023, highlighting the remarkable properties of CTS, such as biocompatibility, chemical versatility, and large surface area, that make it an excellent candidate for sensor modification. Combining CTS with various nanomaterials significantly enhances the detection capabilities of electrochemical sensors. Various types of CTS-based sensors are analyzed, including those utilizing carbon nanomaterials, metallic nanoparticles, conducting polymers, and molecularly imprinted CTS. These sensors exhibit excellent sensitivity, selectivity, and stability, enabling the precise and reliable detection of medications. The manufacturing strategies used for the preparation of CTS-based sensors are described, the underlying detection mechanisms are elucidated, and the integration of CTS sensors with transducer systems is highlighted. The prospects of CTS-based electrochemical sensors are promising, with opportunities for miniaturization, simultaneous detection, and real-time monitoring applications.

A novel sensing platform for electrochemical detection of metronidazole antibiotic based on green-synthesized magnetic Fe3O4 nanoparticles

The spread of antibiotic resistant genes has become a serious global concern. Thus, the development of efficient antibiotic monitoring systems to reduce their environmental risks is of great importance. Here, a potent electrochemical sensor was fabricated to detect metronidazole (MNZ) on the basis of green synthesis of Fe₃O₄ nanoparticles (NPs) using Sambucus ebulus L. leaves alcoholic plant extract as a safe and impressive reducing and stabilizing agent. Several analyses such as X-ray diffraction (XRD), Fourier transform infrared spectrophotometer (FTIR), thermogravimetric analysis (TGA), field emission scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX), and dynamic light scattering (DLS) confirmed the production of homogeneous, monodisperse, regular, and stable magnetite NPs with a spherical morphology. The as-prepared Fe₃O₄NPs were afterwards applied to evaluate the electrochemical activity of MNZ by merging them with graphene nanosheets (GR NSs) on the glassy carbon electrode (GCE). The GR/Fe₃O₄NPs/GCE represented extraordinary catalytic activity toward MNZ with two dynamic ranges of 0.05-5 μM and 5-120 μM, limit of detection (LOD) of 0.23 nM, limit of quantification (LOQ) of 0.76 nM, and sensitivity of 7.34 μA μM^-1 cm^-2. The fabricated sensor was further employed as a practical tool for electrochemical detection of MNZ in real aqueous samples.

Ultrasensitive Electrochemical Detection of Butylated Hydroxy Anisole via Metalloporphyrin Covalent Organic Frameworks Possessing Variable Catalytic Active Sites

Three novel two-dimensional metalloporphyrin COFs (MPor-COF-366, M = Fe, Mn, Cu) were fabricated by changing the metal atoms in the center of the porphyrin framework. The physicochemical characteristics of MPor-COF-366 (M = Fe, Mn, Cu) composites were fully analyzed by diverse electron microscopy and spectroscopy. Under optimal conditions, experiments on determining butylated hydroxy anisole (BHA) at FePor-COF-366/GCE were conducted using differential pulse voltammetry (DPV). It is noted that the FePor-COF-366/GCE sensor showed excellent electrocatalytic performance in the electrochemical detection of BHA, compared with MnPor-COF-366/GCE and CuPor-COF-366/GCE. A linear relationship was obtained for 0.04-1000 μM concentration of BHA, with a low detection limit of 0.015 μM. Additionally, the designed sensor was successfully employed to detect BHA in practical samples, expanding the development of COF-based composites in electrochemical applications.

Multisensory Systems Based on Perfluorosulfonic Acid Membranes Modified with Functionalized CNTs for Determination of Sulfamethoxazole and Trimethoprim in Pharmaceuticals

Sulfamethoxazole and trimethoprim are synthetic bacteriostatic drugs. A potentiometric multisensory system for the analysis of sulfamethoxazole and trimethoprim combination drugs was developed. Perfluorosulfonic acid membranes containing functionalized CNTs were used as the sensor materials. The CNTs' surface was modified by carboxyl, sulfonic acid, or (3-aminopropyl)trimethoxysilanol groups. The influence of the CNT concentration and the properties of their surface, as well as preliminary ultrasonic treatment of the polymer and CNT solution before the casting of hybrid membranes, on their ion-exchange capacity, water uptake, and transport properties was revealed. Cross-sensitivity of the sensors to the analytes was achieved due to ion exchange and hydrophobic interactions with hybrid membranes. An array of cross-sensitive sensors based on the membranes containing 1.0 wt% of CNTs with sulfonic acid or (3-aminopropyl)trimethoxysilanol groups enabled us to provide the simultaneous determination of sulfamethoxazole and trimethoprim in aqueous solutions with a concentration ranging from 1.0 × 10^-5 to 1.0 × 10^-3 M (pH 4.53-8.31). The detection limits of sulfamethoxazole and trimethoprim were 3.5 × 10^-7 and 1.3 × 10^-7 М. The relative errors of sulfamethoxazole and trimethoprim determination in the combination drug as compared with the content declared by the manufacturer were 4% (at 6% RSD) and 5% (at 7% RSD).

Use of a nano-porous gold film electrode modified with chitosan / polypyrrole for electrochemical determination of metronidazole in the Presence of Acetaminophen

This study, it was aimed to provide a sensitive, easy and selective method for designing Nano-porous gold film electrode (NPGF) electrode for simultaneous measurement of metronidazole (MT) and acetaminophen (AC). For this purpose, the NPGF electrode surface was modified with chitosan (CS) and poly pyrrole (PPY) by electrochemical method, and then CS and PPY modified NPGF (PPY-CS-NPGF) electrode were used to measure these drugs. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) are employed for the characterization of the attained PPY-CS-NPGF electrode. Using cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS) and chronoamperometry, the electrochemical behavior of MT was investigated with the modified electrode. By differential pulse voltammetry, linear ranges of concentration 0.005-100 μM with linear coefficients of 0.9898 and a detection limit of 0.0009 μM were obtained for MT. Finally, an electrochemical sensor was used to measure MT in a real sample, which yielded acceptable results. PPY-CS-NPGF electrodes have a wide linear range, high selectivity, sensitivity and stability and can be used successfully to determine these drugs.

Recent Advances in Metal Nanocomposite-Based Electrochemical (Bio)Sensors for Pharmaceutical Analysis

Rising rates of drug abuse and pharmaceutical pollution throughout the world as a consequence of increased drug production and utilization pose a serious risk to public health and to environmental integrity. It is thus critical that reliable analytical approaches to detecting drugs and their metabolites in a range of sample matrices be developed. Recent advances in the design of nanomaterial-based electrochemical sensors and biosensors have enabled promising new approaches to pharmaceutical analysis. In particular, the development of a range of novel metal nanocomposites with enhanced catalytic properties has provided a wealth of opportunities for the design of rapid and reliable platforms for the detection of specific pharmaceutical compounds. The present review provides a comprehensive overview of representative metal nanocomposites with synergistic properties and their recent (2017-2022) application in the context of electrochemical sensing as a means of detecting specific antibiotic, tuberculostatic, analgesic, antineoplastic, antipsychotic, and antihypertensive drugs. In discussing these applications, we further explore a variety of testing-related principles, fabrication approaches, characterization techniques, and parameters associated with the sensitivity and selectivity of these sensor platforms before surveying the future outlook regarding the fabrication of next-generation (bio)sensor platforms for use in pharmaceutical analysis.

An electrochemical sensor for the voltammetric determination of artemisinin based on carbon materials and cobalt phthalocyanine

An electrochemical sensor for the determination of artemisinin has been developed based on a glassy carbon electrode modified with hybrid nanocomposites of cobalt phthalocyanine, graphene nanoplatelets, multi-walled carbon nanotubes and ionic liquids (IL). To improve the sensitivity and selectivity of the sensor, cobalt phthalocyanine (CoPc) was used as an effective redox mediator to promote and catalyze the artemisinin reduction. Furthermore, the graphene nanoplatelets and multi-walled carbon nanotubes were used as excellent conducting supporting materials to improve the sensitivity of the electrochemical sensor. Moreover, IL with a surface charge was also employed to prevent aggregation of the graphene nanoplatelets and multi-walled carbon nanotubes. The analytical signal was generated from the reduction of Co(III)Pc generated by artemisinin. The proposed electrochemical sensor was applied to the detection of artemisinin using differential pulse voltammetry and provided a signal with wide linearity ranging from 1.5-60 μM and 60-600 μM and a detection limit of 0.70 μM (3SD/m). Furthermore, the proposed sensor displayed good repeatability and reproducibility of 2.9-3.0 and 3.1-4.4% RSD, respectively. Applications of the sensor to drug and plant samples demonstrated accuracy in a range of 105-116% recoveries. In addition, the results were in good agreement with those obtained from the HPLC method as a reference technique. Thus, the proposed electrochemical sensor provides a new alternative platform for sensitive and selective determination of artemisinin in the analysis of pharmaceuticals with good precision and accuracy.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

A cucurbit[7]uril-based supramolecular fluorescent probe for the detection of metronidazole with high sensitivity and strong anti-interference capacity

We propose a new method for the selective detection of the antibiotic metronidazole (MNZ) using CB[7]-JAT (cucurbit[7]uril = CB[7] and JAT = jatrorrhizine) as a fluorescent probe, which is based on the competitive reaction between MNZ and JAT for the occupancy of the CB[7] cavity. The proposed method gives a good calibration curve in the concentration range of 0.38–60 μM, and the limit of detection for MNZ is 65 ng mL−1 with those obtained by the standard curve method. Moreover, the proposed method was successfully applied for the determination of MNZ in liquid milk. Most importantly, due to the high binding affinity between CB[7] and MNZ, the proposed method shows great anti-interference capacity to accurately detect MNZ in the presence of other antibiotics.

Chitosan/carbon nanotube hybrids: recent progress and achievements for industrial applications

This review focuses on the state-of-the-art of the recent research development on chitosan/CNT nanomaterials in biomedicine, (bio)sensors, and pollution management.

Cadmium sulfide quantum dots anchored on reduced graphene oxide for the electrochemical detection of metronidazole

In this research, the metal–organic-based synthesis of cadmium sulfide quantum dots (CdS QDs) was performed.

Sonochemical synthesis of nickel-manganous oxide nanocrumbs decorated partially reduced graphene oxide for efficient electrochemical reduction of metronidazole

In the present work, we report on the synthesis of crump-like nickel manganous oxide nanoparticles decorated partially reduced graphene oxide (NiMnO@pr-GO) nanocomposite through high-intensity ultrasonic bath sonication (ultrasonic frequency = 37 kHz and power = 150 W). The NiMnO@pr-GO nanocomposite modified glassy carbon electrode (GCE) was then employed for the electrochemical reduction of detrimental metronidazole (MNZ). The crystalline phase and formation of the NiMnO@pr-GO nanocomposites were confirmed by X-ray diffraction and other spectroscopic techniques. The cyclic voltammetry results demonstrate that this NiMnO@pr-GO nanocomposite modified GCE has a lower reduction potential and higher catalytic activity towards MNZ than do NiMnO and GO modified GCEs. Under optimized conditions, the fabricated NiMnO@pr-GO electrode can detect metronidazole over a wide linear range with a lower limit of detection of 90 nM. The sensitivity of the sensor was 1.22 µA µM^-1cm^-2 and was found to have excellent selectivity and durability for the detection of MNZ.

Effect of surface properties on the electrochemical response of cynarin by electro-synthesized functionalized-polybithiophene/MWCNT/GNP

Cynarin is one of the biologically active functional components present a wide range of pharmacological applications. Herein, we reported the fabrication and surface properties investigation of a new highly sensitive electrochemical sensor for the detection of cynarin. The electrochemical sensors were fabricated in several steps; the first being the synthesis of bi-thiophene derivatives-based monomers 3,3'-bithiophen (M1); 2-methoxy-5-carbaldehyde-[3,3'-bithiophene] (M2) and 2-((2-methoxy-[3,3'-bithiophen]-5-yl)methylene)malononitrile) (M3) followed by electrochemical polymerization on a glassy carbon electrode after which multi-walled carbon nanotube (MWCNT) and gold nanoparticles (GNP's) were electrodeposited layer-by-layer on the polymer coating to obtain multilayer electrochemical sensors. The morphological properties of the formed polymers were evaluated using SEM analysis and the apparent contact angles to preview the changes in surface properties after the functionalization of monomers and therefore their effects on the detection of cynarin. Analytical parameters such as the accumulation time and pH of the PBS solution which influence the sensitivity of the electrochemical sensors were optimized. Under the optimal conditions the GCE/P3/MWCNT/GNP's showed a wide range of analyte concentrations (1 to 100 μM and 0.01 to 1 μM) and detection limit of 0.0095 using pulse differential voltammetry. In addition, the electrochemical sensors showed good reproducibility, stability and selectivity and they were used successfully for the determination of cynarin in real solutions.

Synthesis, characterization and catalytic performance of nanostructured dysprosium molybdate catalyst for selective biomolecule detection in biological and pharmaceutical samples

The current study reports a new, simple and fast method using a flake-like dysprosium molybdate (Dy2MoO6; FL-DyM) nanostructured material to detect the antibiotic drug metronidazole (METZ). This nanocomposite material was employed on the surface of a glassy carbon electrode (GCE) to develop the electrode (FL-DyM/GCE). Further, the synthesized FL-DyM was systematically characterized by powder X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray diffraction (EDS), elemental mapping, X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) analyses. Cyclic (CV) and differential pulse voltammetry (DPV) techniques were used to study the electrochemical properties. The FL-DyM/GCE-based sensor demonstrated excellent selectivity and sensitivity for the detection of the drug METZ, which could be attributed to the strong affinity of FL-DyM towards the -NO2 group in METZ, and the good electrocatalytic activity and conductivity of FL-DyM. The fabrication and optimization of the working electrode were accomplished with CV and DPV obtained by scan rate and pH studies. Compared to the bare GCE and other rare-earth metal molybdates, the FL-DyM/GCE sensor displayed a superior electrocatalytic activity response for METZ detection. The sensor demonstrated a good linear relationship over the concentration range of 0.01-2363 μM. The quantification and detection limits were found to be 0.010 μM and 0.0030 μM, respectively. The FL-DyM/GCE sensor displayed excellent selectivity, repeatability, reproducibility, and stability for the detection of METZ in human urine and commercial METZ tablet samples, which validates the new technique for efficient drug sensing in practical applications.

Determination of ultra trace amounts of metronidazole by 3-phenyl-N-[4-(10,15,20-triphenyl-porphyrin-5-yl)-phenyl]- acrylamide as the fluorescence spectral probe in CTAB microemulsion

In this work, 3-Phenyl-N-[4-(10,15,20-triphenyl-porphyrin-5-yl)-phenyl]- acrylamide (TPPCA) was synthesized for the determination of metronidazole (MTZ). It was found that the type of fluorescence quenching was static quenching determined by Stern-Volmer plot and UV absorption spectroscopy, and thermodynamic related parameters were also obtained. Furthermore, the corresponding measurement conditions: the acidity of the system, the type of surfactant, the concentration of TPPCA and the sequence of reagent addition were optimized. Under the optimal experimental conditions, the linear range of MTZ was determined to be 0.01-0.20 μg mL^-1, and the limit of detection (LOD) was 0.004 μg mL^-1. Importantly, this report provides a simple, fast, and sensitive probe for the determination of MTZ in pharmaceutical practice.

Preparation of reduced graphite oxide loaded with cobalt(II) and nitrogen co-doped carbon polyhedrons from a metal-organic framework (type ZIF-67), and its application to electrochemical determination of metronidazole

The integration of derivatives of granular metal-organic frameworks (MOFs) and an electrically conductive carbon substrate is an effective way to circumvent the deficiency of powdered pristine MOFs or MOF-derived carbon in practical application. The authors describe the use of graphite oxide (GO) as a substrate for in-situ assembly with the zeolitic imidazole framework ZIF-67. The GO and ZIF-67 composites were converted, via pyrolysis, into reduced graphite oxide loaded with Co/N-co-doped carbon polyhedrons (ZIF-67C@rGO). By using various amounts of GO, a series of ZIF-67C@rGO-x with different fractions of GO were synthesized and utilized as electrode modifiers for the detection of the antibiotic metronidazole (MNZ). The results revealed that the ZIF-67C@rGO-0.06 display best sensing performance. This is likely to be due to its hierarchically open pores, abundant active sites and good electrical conductivity. The sensor, best operated near a working potential around -0.6 V (vs. SCE), has a linear response in the 0.5 to 1000 μM MNZ concentration range and a 0.05 μM detection limit. The sensor was applied to the analysis of pharmaceutical samples where it showed excellent selectivity, good repeatability and satisfying recoveries. Graphical abstract Schematic representation of preparation and application of ZIF-67C@rGO-x.

Praseodymium Vanadate-Decorated Sulfur-Doped Carbon Nitride Hybrid Nanocomposite: The Role of a Synergistic Electrocatalyst for the Detection of Metronidazole

The construction of efficient and superior nanostructured materials for the precise determination of contaminants that are hazardous to the environment has gained significant attention by the scientific community. In this regard, we fabricated a nanocomposite consisting of praseodymium vanadate (PrVO₄; PrV) anchored to sulfur-doped carbon nitride (PrV/SCN) and applied it to the electrochemical detection of the antibiotic drug metronidazole (MTZ). The structural and crystalline features of the as-prepared PrV/SCN nanocomposite were characterized by various analytical and spectroscopic methods. More distinctly, the PrV/SCN nanocomposite-modified glassy carbon electrode (GCE) exhibits an outstanding linear range (0.001-2444 μM), high sensitivity (1.386 μA/μM cm²), low detection limit (0.8 nM), good reproducibility, and strong anti-interference ability. Notably, the PrV/SCN sensor can determine MTZ in spiked urine and water samples with high recoveries, suggesting its feasibility for real-time applications. Our findings establish PrV/SCN as a robust and promising platform for electrochemical detection. This promotes innovative design for the synthesis of novel functional nanocomposites.

New Generation of Electrochemical Sensors Based on Multi-Walled Carbon Nanotubes

Multi-walled carbon nanotubes (MWCNT) have provided unprecedented advances in the design of electrochemical sensors. They are composed by sp2 carbon units oriented as multiple concentric tubes of rolled-up graphene, and present remarkable active surface area, chemical inertness, high strength, and low charge-transfer resistance in both aqueous and non-aqueous solutions. MWCNT are very versatile and have been boosting the development of a new generation of electrochemical sensors with application in medicine, pharmacology, food industry, forensic chemistry, and environmental fields. This work highlights the most important synthesis methods and relevant electrochemical properties of MWCNT for the construction of electrochemical sensors, and the numerous configurations and successful applications of these devices. Thousands of studies have been attesting to the exceptional electroanalytical performance of these devices, but there are still questions in MWCNT electrochemistry that deserve more investigation, aiming to provide new outlooks and advances in this field. Additionally, MWCNT-based sensors should be further explored for real industrial applications including for on-line quality control.

Chitosan-templated Pt nanocatalyst loaded mesoporous SnO2 nanofibers: a superior chemiresistor toward acetone molecules

In this work, we introduce a chitosan-Pt complex (CS-Pt) as an effective template for catalytic Pt sensitization and creation of abundant mesopores in SnO2 nanofibers (NFs). The Pt particles encapsulated by the CS exhibit ultrasmall size (∼2.6 nm) and high dispersion characteristics due to repulsion between CS molecules. By combining CS-Pt with electrospinning, mesoporous SnO2 NFs uniformly functionalized with the Pt catalyst (CS-Pt@SnO2 NFs) are synthesized. Particularly, numerous mesopores with diameters of ∼20 nm form through the decomposition of CS, while a small SnO2 grain size (14.32 nm) is achieved by the pinning effect of CS. It is observed that CS-Pt@SnO2 NFs exhibit outstanding response (Rair/Rgas = 141.92 at 5 ppm), excellent selectivity, stability, and fast response (12 s)/recovery (44 s) speed toward 1 ppm of acetone at 350 °C and high humidity (90% RH). In addition, by applying an exponential fitting tool to experimental response values toward 0.1-5 ppm of acetone, it is estimated that CS-Pt@SnO2 NFs can detect 5 ppb of acetone with a notable response (Rair/Rgas = 2.9). Furthermore, the sensor array based on CS-Pt@SnO2 NFs, CS-driven SnO2 NFs, polyol-Pt loaded SnO2 NFs, and dense SnO2 NFs obviously classifies simulated diabetic breath and healthy human breath by using a pattern recognition tool. These results clearly demonstrate that mesoporous SnO2 NFs, particularly functionalized with CS-Pt templated nanocatalysts, open up a new class of sensing layers offering high sensitivity and selectivity.